From: "Z.q. Hou" <zhiqiang.hou@nxp.com> To: Andrew Murray <andrew.murray@arm.com> Cc: "linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>, "linux-arm-kernel@lists.infradead.org" <linux-arm-kernel@lists.infradead.org>, "devicetree@vger.kernel.org" <devicetree@vger.kernel.org>, "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>, "bhelgaas@google.com" <bhelgaas@google.com>, "robh+dt@kernel.org" <robh+dt@kernel.org>, "arnd@arndb.de" <arnd@arndb.de>, "mark.rutland@arm.com" <mark.rutland@arm.com>, "l.subrahmanya@mobiveil.co.in" <l.subrahmanya@mobiveil.co.in>, "shawnguo@kernel.org" <shawnguo@kernel.org>, "m.karthikeyan@mobiveil.co.in" <m.karthikeyan@mobiveil.co.in>, Leo Li <leoyang.li@nxp.com>, "lorenzo.pieralisi@arm.com" <lorenzo.pieralisi@arm.com>, "catalin.marinas@arm.com" <catalin.marinas@arm.com>, "will.deacon@arm.com" <will.deacon@arm.com>, Mingkai Hu <mingkai.hu@nxp.com>, "M.h. Lian" <minghuan.lian@nxp.com>, Xiaowei Bao <xiaowei.bao@nxp.com> Subject: RE: [PATCHv9 02/12] PCI: mobiveil: Move the host initialization into a routine Date: Thu, 6 Feb 2020 11:14:21 +0000 [thread overview] Message-ID: <DB8PR04MB674737224E5914240BE2BC62841D0@DB8PR04MB6747.eurprd04.prod.outlook.com> (raw) In-Reply-To: <20200113101912.GH42593@e119886-lin.cambridge.arm.com> Hi Andrew, Thanks a lot for your comments! > -----Original Message----- > From: Andrew Murray <andrew.murray@arm.com> > Sent: 2020年1月13日 18:19 > To: Z.q. Hou <zhiqiang.hou@nxp.com> > Cc: linux-pci@vger.kernel.org; linux-arm-kernel@lists.infradead.org; > devicetree@vger.kernel.org; linux-kernel@vger.kernel.org; > bhelgaas@google.com; robh+dt@kernel.org; arnd@arndb.de; > mark.rutland@arm.com; l.subrahmanya@mobiveil.co.in; > shawnguo@kernel.org; m.karthikeyan@mobiveil.co.in; Leo Li > <leoyang.li@nxp.com>; lorenzo.pieralisi@arm.com; > catalin.marinas@arm.com; will.deacon@arm.com; Mingkai Hu > <mingkai.hu@nxp.com>; M.h. Lian <minghuan.lian@nxp.com>; Xiaowei Bao > <xiaowei.bao@nxp.com> > Subject: Re: [PATCHv9 02/12] PCI: mobiveil: Move the host initialization into a > routine > > On Wed, Nov 20, 2019 at 03:45:30AM +0000, Z.q. Hou wrote: > > From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> > > > > Move the host initialization related operations into a new routine to > > make it can be reused by other incoming platform's > > s/to make/such that/ > > 'function' is probably a better word than 'routine'. > Will change in v10. > > > PCIe host driver, in which the Mobiveil GPEX is integrated. > > > > Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> > > --- > > V9: > > - New patch splited from the #1 of V8 patches to make it easy to review. > > > > drivers/pci/controller/pcie-mobiveil.c | 38 > > +++++++++++++++----------- > > 1 file changed, 22 insertions(+), 16 deletions(-) > > > > diff --git a/drivers/pci/controller/pcie-mobiveil.c > > b/drivers/pci/controller/pcie-mobiveil.c > > index 5fd26e376af2..97f682ca7c7a 100644 > > --- a/drivers/pci/controller/pcie-mobiveil.c > > +++ b/drivers/pci/controller/pcie-mobiveil.c > > @@ -873,27 +873,15 @@ static int mobiveil_pcie_init_irq_domain(struct > mobiveil_pcie *pcie) > > return 0; > > } > > > > -static int mobiveil_pcie_probe(struct platform_device *pdev) > > +int mobiveil_pcie_host_probe(struct mobiveil_pcie *pcie) > > This is no longer static - but do you need to add a header file somewhere? The function mobiveil_pcie_probe() is still static below, the mobiveil_pcie_host_probe() is new introduced one, it is now only used in this .c file, so I'll change it to a static function in v10. > > > > { > > - struct mobiveil_pcie *pcie; > > + struct root_port *rp = &pcie->rp; > > + struct pci_host_bridge *bridge = rp->bridge; > > + struct device *dev = &pcie->pdev->dev; > > struct pci_bus *bus; > > struct pci_bus *child; > > - struct pci_host_bridge *bridge; > > - struct device *dev = &pdev->dev; > > - struct root_port *rp; > > int ret; > > > > - /* allocate the PCIe port */ > > - bridge = devm_pci_alloc_host_bridge(dev, sizeof(*pcie)); > > - if (!bridge) > > - return -ENOMEM; > > - > > - pcie = pci_host_bridge_priv(bridge); > > - rp = &pcie->rp; > > - rp->bridge = bridge; > > - > > - pcie->pdev = pdev; > > - > > ret = mobiveil_pcie_parse_dt(pcie); > > if (ret) { > > dev_err(dev, "Parsing DT failed, ret: %x\n", ret); @@ -956,6 > > +944,24 @@ static int mobiveil_pcie_probe(struct platform_device *pdev) > > return 0; > > } > > > > +static int mobiveil_pcie_probe(struct platform_device *pdev) { > > + struct mobiveil_pcie *pcie; > > + struct pci_host_bridge *bridge; > > + struct device *dev = &pdev->dev; > > + > > + bridge = devm_pci_alloc_host_bridge(dev, sizeof(*pcie)); > > You've lost the comment that was above this. Will add it back. Thanks, Zhiqiang > > Thanks, > > Andrew Murray > > > + if (!bridge) > > + return -ENOMEM; > > + > > + pcie = pci_host_bridge_priv(bridge); > > + pcie->rp.bridge = bridge; > > + > > + pcie->pdev = pdev; > > + > > + return mobiveil_pcie_host_probe(pcie); } > > + > > static const struct of_device_id mobiveil_pcie_of_match[] = { > > {.compatible = "mbvl,gpex40-pcie",}, > > {}, > > -- > > 2.17.1 > >
WARNING: multiple messages have this Message-ID (diff)
From: "Z.q. Hou" <zhiqiang.hou@nxp.com> To: Andrew Murray <andrew.murray@arm.com> Cc: "mark.rutland@arm.com" <mark.rutland@arm.com>, "devicetree@vger.kernel.org" <devicetree@vger.kernel.org>, "lorenzo.pieralisi@arm.com" <lorenzo.pieralisi@arm.com>, "m.karthikeyan@mobiveil.co.in" <m.karthikeyan@mobiveil.co.in>, "arnd@arndb.de" <arnd@arndb.de>, "linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>, "l.subrahmanya@mobiveil.co.in" <l.subrahmanya@mobiveil.co.in>, "will.deacon@arm.com" <will.deacon@arm.com>, "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>, Leo Li <leoyang.li@nxp.com>, "M.h. Lian" <minghuan.lian@nxp.com>, "robh+dt@kernel.org" <robh+dt@kernel.org>, Mingkai Hu <mingkai.hu@nxp.com>, Xiaowei Bao <xiaowei.bao@nxp.com>, "catalin.marinas@arm.com" <catalin.marinas@arm.com>, "bhelgaas@google.com" <bhelgaas@google.com>, "shawnguo@kernel.org" <shawnguo@kernel.org>, "linux-arm-kernel@lists.infradead.org" <linux-arm-kernel@lists.infradead.org> Subject: RE: [PATCHv9 02/12] PCI: mobiveil: Move the host initialization into a routine Date: Thu, 6 Feb 2020 11:14:21 +0000 [thread overview] Message-ID: <DB8PR04MB674737224E5914240BE2BC62841D0@DB8PR04MB6747.eurprd04.prod.outlook.com> (raw) In-Reply-To: <20200113101912.GH42593@e119886-lin.cambridge.arm.com> Hi Andrew, Thanks a lot for your comments! > -----Original Message----- > From: Andrew Murray <andrew.murray@arm.com> > Sent: 2020年1月13日 18:19 > To: Z.q. Hou <zhiqiang.hou@nxp.com> > Cc: linux-pci@vger.kernel.org; linux-arm-kernel@lists.infradead.org; > devicetree@vger.kernel.org; linux-kernel@vger.kernel.org; > bhelgaas@google.com; robh+dt@kernel.org; arnd@arndb.de; > mark.rutland@arm.com; l.subrahmanya@mobiveil.co.in; > shawnguo@kernel.org; m.karthikeyan@mobiveil.co.in; Leo Li > <leoyang.li@nxp.com>; lorenzo.pieralisi@arm.com; > catalin.marinas@arm.com; will.deacon@arm.com; Mingkai Hu > <mingkai.hu@nxp.com>; M.h. Lian <minghuan.lian@nxp.com>; Xiaowei Bao > <xiaowei.bao@nxp.com> > Subject: Re: [PATCHv9 02/12] PCI: mobiveil: Move the host initialization into a > routine > > On Wed, Nov 20, 2019 at 03:45:30AM +0000, Z.q. Hou wrote: > > From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> > > > > Move the host initialization related operations into a new routine to > > make it can be reused by other incoming platform's > > s/to make/such that/ > > 'function' is probably a better word than 'routine'. > Will change in v10. > > > PCIe host driver, in which the Mobiveil GPEX is integrated. > > > > Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> > > --- > > V9: > > - New patch splited from the #1 of V8 patches to make it easy to review. > > > > drivers/pci/controller/pcie-mobiveil.c | 38 > > +++++++++++++++----------- > > 1 file changed, 22 insertions(+), 16 deletions(-) > > > > diff --git a/drivers/pci/controller/pcie-mobiveil.c > > b/drivers/pci/controller/pcie-mobiveil.c > > index 5fd26e376af2..97f682ca7c7a 100644 > > --- a/drivers/pci/controller/pcie-mobiveil.c > > +++ b/drivers/pci/controller/pcie-mobiveil.c > > @@ -873,27 +873,15 @@ static int mobiveil_pcie_init_irq_domain(struct > mobiveil_pcie *pcie) > > return 0; > > } > > > > -static int mobiveil_pcie_probe(struct platform_device *pdev) > > +int mobiveil_pcie_host_probe(struct mobiveil_pcie *pcie) > > This is no longer static - but do you need to add a header file somewhere? The function mobiveil_pcie_probe() is still static below, the mobiveil_pcie_host_probe() is new introduced one, it is now only used in this .c file, so I'll change it to a static function in v10. > > > > { > > - struct mobiveil_pcie *pcie; > > + struct root_port *rp = &pcie->rp; > > + struct pci_host_bridge *bridge = rp->bridge; > > + struct device *dev = &pcie->pdev->dev; > > struct pci_bus *bus; > > struct pci_bus *child; > > - struct pci_host_bridge *bridge; > > - struct device *dev = &pdev->dev; > > - struct root_port *rp; > > int ret; > > > > - /* allocate the PCIe port */ > > - bridge = devm_pci_alloc_host_bridge(dev, sizeof(*pcie)); > > - if (!bridge) > > - return -ENOMEM; > > - > > - pcie = pci_host_bridge_priv(bridge); > > - rp = &pcie->rp; > > - rp->bridge = bridge; > > - > > - pcie->pdev = pdev; > > - > > ret = mobiveil_pcie_parse_dt(pcie); > > if (ret) { > > dev_err(dev, "Parsing DT failed, ret: %x\n", ret); @@ -956,6 > > +944,24 @@ static int mobiveil_pcie_probe(struct platform_device *pdev) > > return 0; > > } > > > > +static int mobiveil_pcie_probe(struct platform_device *pdev) { > > + struct mobiveil_pcie *pcie; > > + struct pci_host_bridge *bridge; > > + struct device *dev = &pdev->dev; > > + > > + bridge = devm_pci_alloc_host_bridge(dev, sizeof(*pcie)); > > You've lost the comment that was above this. Will add it back. Thanks, Zhiqiang > > Thanks, > > Andrew Murray > > > + if (!bridge) > > + return -ENOMEM; > > + > > + pcie = pci_host_bridge_priv(bridge); > > + pcie->rp.bridge = bridge; > > + > > + pcie->pdev = pdev; > > + > > + return mobiveil_pcie_host_probe(pcie); } > > + > > static const struct of_device_id mobiveil_pcie_of_match[] = { > > {.compatible = "mbvl,gpex40-pcie",}, > > {}, > > -- > > 2.17.1 > > _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-02-06 11:14 UTC|newest] Thread overview: 128+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-11-20 3:45 [PATCHv9 00/12] PCI: Recode Mobiveil driver and add PCIe Gen4 driver for NXP Layerscape SoCs Z.q. Hou 2019-11-20 3:45 ` Z.q. Hou 2019-11-20 3:45 ` [PATCHv9 01/12] PCI: mobiveil: Re-abstract the private structure Z.q. Hou 2019-11-20 3:45 ` Z.q. Hou 2020-01-13 10:09 ` Andrew Murray 2020-01-13 10:09 ` Andrew Murray 2020-02-06 11:04 ` Z.q. Hou 2020-02-06 11:04 ` Z.q. Hou 2020-02-06 11:27 ` Andrew Murray 2020-02-06 11:27 ` Andrew Murray 2019-11-20 3:45 ` [PATCHv9 02/12] PCI: mobiveil: Move the host initialization into a routine Z.q. Hou 2019-11-20 3:45 ` Z.q. Hou 2020-01-13 10:19 ` Andrew Murray 2020-01-13 10:19 ` Andrew Murray 2020-02-06 11:14 ` Z.q. Hou [this message] 2020-02-06 11:14 ` Z.q. Hou 2019-11-20 3:45 ` [PATCHv9 03/12] PCI: mobiveil: Collect the interrupt related operations " Z.q. Hou 2019-11-20 3:45 ` Z.q. Hou 2020-01-13 10:34 ` Andrew Murray 2020-01-13 10:34 ` Andrew Murray 2020-02-06 11:30 ` Z.q. Hou 2020-02-06 11:30 ` Z.q. Hou 2019-11-20 3:45 ` [PATCHv9 04/12] PCI: mobiveil: Modularize the Mobiveil PCIe Host Bridge IP driver Z.q. Hou 2019-11-20 3:45 ` Z.q. Hou 2020-01-13 11:05 ` Andrew Murray 2020-01-13 11:05 ` Andrew Murray 2020-02-06 12:25 ` Z.q. Hou 2020-02-06 12:25 ` Z.q. Hou 2019-11-20 3:45 ` [PATCHv9 05/12] PCI: mobiveil: Add callback function for interrupt initialization Z.q. Hou 2019-11-20 3:45 ` Z.q. Hou 2020-01-13 11:19 ` Andrew Murray 2020-01-13 11:19 ` Andrew Murray 2020-02-06 13:25 ` Z.q. Hou 2020-02-06 13:25 ` Z.q. Hou 2019-11-20 3:45 ` [PATCHv9 06/12] PCI: mobiveil: Add callback function for link up check Z.q. Hou 2019-11-20 3:45 ` Z.q. Hou 2020-01-13 11:22 ` Andrew Murray 2020-01-13 11:22 ` Andrew Murray 2020-02-06 13:25 ` Z.q. Hou 2020-02-06 13:25 ` Z.q. Hou 2019-11-20 3:46 ` [PATCHv9 07/12] PCI: mobiveil: Make mobiveil_host_init() can be used to re-init host Z.q. Hou 2019-11-20 3:46 ` Z.q. Hou 2020-01-13 11:26 ` Andrew Murray 2020-01-13 11:26 ` Andrew Murray 2020-02-06 13:27 ` Z.q. Hou 2020-02-06 13:27 ` Z.q. Hou 2019-11-20 3:46 ` [PATCHv9 08/12] PCI: mobiveil: Add 8-bit and 16-bit CSR register accessors Z.q. Hou 2019-11-20 3:46 ` Z.q. Hou 2020-01-13 11:31 ` Andrew Murray 2020-01-13 11:31 ` Andrew Murray 2020-02-06 13:45 ` Z.q. Hou 2020-02-06 13:45 ` Z.q. Hou 2019-11-20 3:46 ` [PATCHv9 09/12] dt-bindings: PCI: Add NXP Layerscape SoCs PCIe Gen4 controller Z.q. Hou 2019-11-20 3:46 ` Z.q. Hou 2019-11-20 3:46 ` [PATCHv9 10/12] PCI: mobiveil: Add PCIe Gen4 RC driver for NXP Layerscape SoCs Z.q. Hou 2019-11-20 3:46 ` Z.q. Hou 2020-01-13 12:02 ` Andrew Murray 2020-01-13 12:02 ` Andrew Murray 2020-02-06 13:45 ` Z.q. Hou 2020-02-06 13:45 ` Z.q. Hou 2020-02-06 14:29 ` Andrew Murray 2020-02-06 14:29 ` Andrew Murray 2019-11-20 3:46 ` [PATCHv9 11/12] arm64: dts: lx2160a: Add PCIe controller DT nodes Z.q. Hou 2019-11-20 3:46 ` Z.q. Hou 2019-11-20 3:46 ` [PATCHv9 12/12] arm64: defconfig: Enable CONFIG_PCIE_LAYERSCAPE_GEN4 Z.q. Hou 2019-11-20 3:46 ` Z.q. Hou 2019-11-20 9:57 ` [PATCHv9 00/12] PCI: Recode Mobiveil driver and add PCIe Gen4 driver for NXP Layerscape SoCs Russell King - ARM Linux admin 2019-11-20 9:57 ` Russell King - ARM Linux admin 2019-11-20 10:30 ` Z.q. Hou 2019-11-20 10:30 ` Z.q. Hou 2019-12-13 18:37 ` Olof Johansson 2019-12-13 18:37 ` Olof Johansson 2019-12-17 2:50 ` Z.q. Hou 2019-12-17 2:50 ` Z.q. Hou 2020-01-10 15:33 ` Lorenzo Pieralisi 2020-01-10 15:33 ` Lorenzo Pieralisi 2020-01-10 17:05 ` Olof Johansson 2020-01-10 17:05 ` Olof Johansson 2020-02-06 10:57 ` Z.q. Hou 2020-02-06 10:57 ` Z.q. Hou 2020-02-10 15:12 ` Olof Johansson 2020-02-10 15:12 ` Olof Johansson 2020-02-10 15:22 ` Russell King - ARM Linux admin 2020-02-10 15:22 ` Russell King - ARM Linux admin 2020-02-10 15:28 ` Olof Johansson 2020-02-10 15:28 ` Olof Johansson 2020-02-10 16:15 ` Russell King - ARM Linux admin 2020-02-10 16:15 ` Russell King - ARM Linux admin 2020-02-10 17:20 ` Russell King - ARM Linux admin 2020-02-10 17:20 ` Russell King - ARM Linux admin 2020-02-10 18:33 ` Olof Johansson 2020-02-10 18:33 ` Olof Johansson 2020-02-10 18:41 ` Li Yang 2020-02-10 18:41 ` Li Yang 2020-02-10 19:48 ` Li Yang 2020-02-10 19:48 ` Li Yang 2020-02-11 12:13 ` Laurentiu Tudor 2020-02-11 12:13 ` Laurentiu Tudor 2020-02-11 13:04 ` Robin Murphy 2020-02-11 13:04 ` Robin Murphy 2020-02-11 13:55 ` Laurentiu Tudor 2020-02-11 13:55 ` Laurentiu Tudor 2020-02-11 14:51 ` Robin Murphy 2020-02-11 14:51 ` Robin Murphy 2020-02-11 14:48 ` Olof Johansson 2020-02-11 14:48 ` Olof Johansson 2020-02-11 15:14 ` Laurentiu Tudor 2020-02-11 15:14 ` Laurentiu Tudor 2020-02-29 9:55 ` Russell King - ARM Linux admin 2020-02-29 9:55 ` Russell King - ARM Linux admin 2020-02-29 11:04 ` Russell King - ARM Linux admin 2020-02-29 11:04 ` Russell King - ARM Linux admin 2020-02-29 12:08 ` Russell King - ARM Linux admin 2020-02-29 12:08 ` Russell King - ARM Linux admin 2020-02-29 13:32 ` Russell King - ARM Linux admin 2020-02-29 13:32 ` Russell King - ARM Linux admin 2020-02-29 15:19 ` Theodore Y. Ts'o 2020-02-29 15:19 ` Theodore Y. Ts'o 2020-02-29 17:03 ` Russell King - ARM Linux admin 2020-02-29 17:03 ` Russell King - ARM Linux admin 2020-02-29 18:03 ` Theodore Y. Ts'o 2020-02-29 18:03 ` Theodore Y. Ts'o 2020-06-05 23:53 ` Russell King - ARM Linux admin 2020-06-05 23:53 ` Russell King - ARM Linux admin 2020-06-06 10:19 ` Russell King - ARM Linux admin 2020-06-06 10:19 ` Russell King - ARM Linux admin 2020-02-10 15:33 ` Lorenzo Pieralisi 2020-02-10 15:33 ` Lorenzo Pieralisi
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=DB8PR04MB674737224E5914240BE2BC62841D0@DB8PR04MB6747.eurprd04.prod.outlook.com \ --to=zhiqiang.hou@nxp.com \ --cc=andrew.murray@arm.com \ --cc=arnd@arndb.de \ --cc=bhelgaas@google.com \ --cc=catalin.marinas@arm.com \ --cc=devicetree@vger.kernel.org \ --cc=l.subrahmanya@mobiveil.co.in \ --cc=leoyang.li@nxp.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-pci@vger.kernel.org \ --cc=lorenzo.pieralisi@arm.com \ --cc=m.karthikeyan@mobiveil.co.in \ --cc=mark.rutland@arm.com \ --cc=minghuan.lian@nxp.com \ --cc=mingkai.hu@nxp.com \ --cc=robh+dt@kernel.org \ --cc=shawnguo@kernel.org \ --cc=will.deacon@arm.com \ --cc=xiaowei.bao@nxp.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.