All of lore.kernel.org
 help / color / mirror / Atom feed
From: Russell King <rmk+kernel@arm.linux.org.uk>
To: linux-rockchip@lists.infradead.org, alsa-devel@alsa-project.org,
	dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Cc: Philipp Zabel <p.zabel@pengutronix.de>,
	Andy Yan <andy.yan@rock-chips.com>,
	Yakir Yang <ykk@rock-chips.com>,
	Fabio Estevam <fabio.estevam@freescale.com>,
	Mark Brown <broonie@kernel.org>, Takashi Iwai <tiwai@suse.de>,
	Jaroslav Kysela <perex@perex.cz>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Jon Nettleton <jon.nettleton@gmail.com>,
	David Airlie <airlied@linux.ie>
Subject: [PATCH 7/9] drm: bridge/dw_hdmi: remove ratio support from ACR code
Date: Sat, 08 Aug 2015 17:10:37 +0100	[thread overview]
Message-ID: <E1ZO6hh-0003Nc-A7@rmk-PC.arm.linux.org.uk> (raw)
In-Reply-To: <20150808160936.GN7557@n2100.arm.linux.org.uk>

We never set the ratio for CTS/N calculation for the audio clock
regenerator (ACR) to anything but 100, so this adds pointless
complexity.  Should we support pixel repetition, we should update the
CTS/N calculation code to use those parameters or the actual TMDS clock
rate instead of a ratio.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/gpu/drm/bridge/dw_hdmi.c | 44 ++++++++++++++++------------------------
 1 file changed, 18 insertions(+), 26 deletions(-)

diff --git a/drivers/gpu/drm/bridge/dw_hdmi.c b/drivers/gpu/drm/bridge/dw_hdmi.c
index 5576cd7d7abb..60487bff48e3 100644
--- a/drivers/gpu/drm/bridge/dw_hdmi.c
+++ b/drivers/gpu/drm/bridge/dw_hdmi.c
@@ -140,7 +140,6 @@ struct dw_hdmi {
 	unsigned int audio_cts;
 	unsigned int audio_n;
 	bool audio_enable;
-	int ratio;
 
 	void (*write)(struct dw_hdmi *hdmi, u8 val, int offset);
 	u8 (*read)(struct dw_hdmi *hdmi, int offset);
@@ -217,8 +216,7 @@ static void hdmi_set_cts_n(struct dw_hdmi *hdmi, unsigned int cts,
 	hdmi_writeb(hdmi, n & 0xff, HDMI_AUD_N1);
 }
 
-static unsigned int hdmi_compute_n(unsigned int freq, unsigned long pixel_clk,
-				   unsigned int ratio)
+static unsigned int hdmi_compute_n(unsigned int freq, unsigned long pixel_clk)
 {
 	unsigned int n = (128 * freq) / 1000;
 	unsigned int mult = 1;
@@ -231,9 +229,9 @@ static unsigned int hdmi_compute_n(unsigned int freq, unsigned long pixel_clk,
 	switch (freq) {
 	case 32000:
 		if (pixel_clk == 25175000)
-			n = (ratio == 150) ? 9152 : 4576;
+			n = 4576;
 		else if (pixel_clk == 27027000)
-			n = (ratio == 150) ? 8192 : 4096;
+			n = 4096;
 		else if (pixel_clk == 74176000 || pixel_clk == 148352000)
 			n = 11648;
 		else
@@ -247,7 +245,7 @@ static unsigned int hdmi_compute_n(unsigned int freq, unsigned long pixel_clk,
 		else if (pixel_clk == 74176000)
 			n = 17836;
 		else if (pixel_clk == 148352000)
-			n = (ratio == 150) ? 17836 : 8918;
+			n = 8918;
 		else
 			n = 6272;
 		n *= mult;
@@ -255,13 +253,13 @@ static unsigned int hdmi_compute_n(unsigned int freq, unsigned long pixel_clk,
 
 	case 48000:
 		if (pixel_clk == 25175000)
-			n = (ratio == 150) ? 9152 : 6864;
+			n = 6864;
 		else if (pixel_clk == 27027000)
-			n = (ratio == 150) ? 8192 : 6144;
+			n = 6144;
 		else if (pixel_clk == 74176000)
 			n = 11648;
 		else if (pixel_clk == 148352000)
-			n = (ratio == 150) ? 11648 : 5824;
+			n = 5824;
 		else
 			n = 6144;
 		n *= mult;
@@ -274,13 +272,11 @@ static unsigned int hdmi_compute_n(unsigned int freq, unsigned long pixel_clk,
 	return n;
 }
 
-static unsigned int hdmi_compute_cts(unsigned int freq, unsigned long pixel_clk,
-				     unsigned int ratio)
+static unsigned int hdmi_compute_cts(unsigned int freq, unsigned long pixel_clk)
 {
 	unsigned int cts = 0;
 
-	pr_debug("%s: freq: %d pixel_clk: %ld ratio: %d\n", __func__, freq,
-		 pixel_clk, ratio);
+	pr_debug("%s: freq: %d pixel_clk: %ld\n", __func__, freq, pixel_clk);
 
 	switch (freq) {
 	case 32000:
@@ -341,26 +337,24 @@ static unsigned int hdmi_compute_cts(unsigned int freq, unsigned long pixel_clk,
 	default:
 		break;
 	}
-	if (ratio == 100)
-		return cts;
-	return (cts * ratio) / 100;
+	return cts;
 }
 
 static void hdmi_set_clk_regenerator(struct dw_hdmi *hdmi,
-	unsigned long pixel_clk, unsigned int sample_rate, unsigned int ratio)
+	unsigned long pixel_clk, unsigned int sample_rate)
 {
 	unsigned int n, cts;
 
-	n = hdmi_compute_n(sample_rate, pixel_clk, ratio);
-	cts = hdmi_compute_cts(sample_rate, pixel_clk, ratio);
+	n = hdmi_compute_n(sample_rate, pixel_clk);
+	cts = hdmi_compute_cts(sample_rate, pixel_clk);
 	if (!cts) {
 		dev_err(hdmi->dev,
 			"%s: pixel clock/sample rate not supported: %luMHz / %ukHz\n",
 			__func__, pixel_clk, sample_rate);
 	}
 
-	dev_dbg(hdmi->dev, "%s: samplerate=%ukHz ratio=%d pixelclk=%luMHz N=%d cts=%d\n",
-		__func__, sample_rate, ratio, pixel_clk, n, cts);
+	dev_dbg(hdmi->dev, "%s: samplerate=%ukHz pixelclk=%luMHz N=%d cts=%d\n",
+		__func__, sample_rate, pixel_clk, n, cts);
 
 	spin_lock_irq(&hdmi->audio_lock);
 	hdmi->audio_n = n;
@@ -372,8 +366,7 @@ static void hdmi_set_clk_regenerator(struct dw_hdmi *hdmi,
 static void hdmi_init_clk_regenerator(struct dw_hdmi *hdmi)
 {
 	mutex_lock(&hdmi->audio_mutex);
-	hdmi_set_clk_regenerator(hdmi, 74250000, hdmi->sample_rate,
-				 hdmi->ratio);
+	hdmi_set_clk_regenerator(hdmi, 74250000, hdmi->sample_rate);
 	mutex_unlock(&hdmi->audio_mutex);
 }
 
@@ -381,7 +374,7 @@ static void hdmi_clk_regenerator_update_pixel_clock(struct dw_hdmi *hdmi)
 {
 	mutex_lock(&hdmi->audio_mutex);
 	hdmi_set_clk_regenerator(hdmi, hdmi->hdmi_data.video_mode.mpixelclock,
-				 hdmi->sample_rate, hdmi->ratio);
+				 hdmi->sample_rate);
 	mutex_unlock(&hdmi->audio_mutex);
 }
 
@@ -390,7 +383,7 @@ void dw_hdmi_set_sample_rate(struct dw_hdmi *hdmi, unsigned int rate)
 	mutex_lock(&hdmi->audio_mutex);
 	hdmi->sample_rate = rate;
 	hdmi_set_clk_regenerator(hdmi, hdmi->hdmi_data.video_mode.mpixelclock,
-				 hdmi->sample_rate, hdmi->ratio);
+				 hdmi->sample_rate);
 	mutex_unlock(&hdmi->audio_mutex);
 }
 EXPORT_SYMBOL_GPL(dw_hdmi_set_sample_rate);
@@ -1746,7 +1739,6 @@ int dw_hdmi_bind(struct device *dev, struct device *master,
 	hdmi->dev = dev;
 	hdmi->dev_type = plat_data->dev_type;
 	hdmi->sample_rate = 48000;
-	hdmi->ratio = 100;
 	hdmi->encoder = encoder;
 	hdmi->disabled = true;
 	hdmi->rxsense = true;
-- 
2.1.0


WARNING: multiple messages have this Message-ID (diff)
From: Russell King <rmk+kernel@arm.linux.org.uk>
To: linux-rockchip@lists.infradead.org, alsa-devel@alsa-project.org,
	dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Cc: Fabio Estevam <fabio.estevam@freescale.com>,
	Jaroslav Kysela <perex@perex.cz>, Mark Brown <broonie@kernel.org>,
	Yakir Yang <ykk@rock-chips.com>,
	Andy Yan <andy.yan@rock-chips.com>
Subject: [PATCH 7/9] drm: bridge/dw_hdmi: remove ratio support from ACR code
Date: Sat, 08 Aug 2015 17:10:37 +0100	[thread overview]
Message-ID: <E1ZO6hh-0003Nc-A7@rmk-PC.arm.linux.org.uk> (raw)
In-Reply-To: <20150808160936.GN7557@n2100.arm.linux.org.uk>

We never set the ratio for CTS/N calculation for the audio clock
regenerator (ACR) to anything but 100, so this adds pointless
complexity.  Should we support pixel repetition, we should update the
CTS/N calculation code to use those parameters or the actual TMDS clock
rate instead of a ratio.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/gpu/drm/bridge/dw_hdmi.c | 44 ++++++++++++++++------------------------
 1 file changed, 18 insertions(+), 26 deletions(-)

diff --git a/drivers/gpu/drm/bridge/dw_hdmi.c b/drivers/gpu/drm/bridge/dw_hdmi.c
index 5576cd7d7abb..60487bff48e3 100644
--- a/drivers/gpu/drm/bridge/dw_hdmi.c
+++ b/drivers/gpu/drm/bridge/dw_hdmi.c
@@ -140,7 +140,6 @@ struct dw_hdmi {
 	unsigned int audio_cts;
 	unsigned int audio_n;
 	bool audio_enable;
-	int ratio;
 
 	void (*write)(struct dw_hdmi *hdmi, u8 val, int offset);
 	u8 (*read)(struct dw_hdmi *hdmi, int offset);
@@ -217,8 +216,7 @@ static void hdmi_set_cts_n(struct dw_hdmi *hdmi, unsigned int cts,
 	hdmi_writeb(hdmi, n & 0xff, HDMI_AUD_N1);
 }
 
-static unsigned int hdmi_compute_n(unsigned int freq, unsigned long pixel_clk,
-				   unsigned int ratio)
+static unsigned int hdmi_compute_n(unsigned int freq, unsigned long pixel_clk)
 {
 	unsigned int n = (128 * freq) / 1000;
 	unsigned int mult = 1;
@@ -231,9 +229,9 @@ static unsigned int hdmi_compute_n(unsigned int freq, unsigned long pixel_clk,
 	switch (freq) {
 	case 32000:
 		if (pixel_clk == 25175000)
-			n = (ratio == 150) ? 9152 : 4576;
+			n = 4576;
 		else if (pixel_clk == 27027000)
-			n = (ratio == 150) ? 8192 : 4096;
+			n = 4096;
 		else if (pixel_clk == 74176000 || pixel_clk == 148352000)
 			n = 11648;
 		else
@@ -247,7 +245,7 @@ static unsigned int hdmi_compute_n(unsigned int freq, unsigned long pixel_clk,
 		else if (pixel_clk == 74176000)
 			n = 17836;
 		else if (pixel_clk == 148352000)
-			n = (ratio == 150) ? 17836 : 8918;
+			n = 8918;
 		else
 			n = 6272;
 		n *= mult;
@@ -255,13 +253,13 @@ static unsigned int hdmi_compute_n(unsigned int freq, unsigned long pixel_clk,
 
 	case 48000:
 		if (pixel_clk == 25175000)
-			n = (ratio == 150) ? 9152 : 6864;
+			n = 6864;
 		else if (pixel_clk == 27027000)
-			n = (ratio == 150) ? 8192 : 6144;
+			n = 6144;
 		else if (pixel_clk == 74176000)
 			n = 11648;
 		else if (pixel_clk == 148352000)
-			n = (ratio == 150) ? 11648 : 5824;
+			n = 5824;
 		else
 			n = 6144;
 		n *= mult;
@@ -274,13 +272,11 @@ static unsigned int hdmi_compute_n(unsigned int freq, unsigned long pixel_clk,
 	return n;
 }
 
-static unsigned int hdmi_compute_cts(unsigned int freq, unsigned long pixel_clk,
-				     unsigned int ratio)
+static unsigned int hdmi_compute_cts(unsigned int freq, unsigned long pixel_clk)
 {
 	unsigned int cts = 0;
 
-	pr_debug("%s: freq: %d pixel_clk: %ld ratio: %d\n", __func__, freq,
-		 pixel_clk, ratio);
+	pr_debug("%s: freq: %d pixel_clk: %ld\n", __func__, freq, pixel_clk);
 
 	switch (freq) {
 	case 32000:
@@ -341,26 +337,24 @@ static unsigned int hdmi_compute_cts(unsigned int freq, unsigned long pixel_clk,
 	default:
 		break;
 	}
-	if (ratio == 100)
-		return cts;
-	return (cts * ratio) / 100;
+	return cts;
 }
 
 static void hdmi_set_clk_regenerator(struct dw_hdmi *hdmi,
-	unsigned long pixel_clk, unsigned int sample_rate, unsigned int ratio)
+	unsigned long pixel_clk, unsigned int sample_rate)
 {
 	unsigned int n, cts;
 
-	n = hdmi_compute_n(sample_rate, pixel_clk, ratio);
-	cts = hdmi_compute_cts(sample_rate, pixel_clk, ratio);
+	n = hdmi_compute_n(sample_rate, pixel_clk);
+	cts = hdmi_compute_cts(sample_rate, pixel_clk);
 	if (!cts) {
 		dev_err(hdmi->dev,
 			"%s: pixel clock/sample rate not supported: %luMHz / %ukHz\n",
 			__func__, pixel_clk, sample_rate);
 	}
 
-	dev_dbg(hdmi->dev, "%s: samplerate=%ukHz ratio=%d pixelclk=%luMHz N=%d cts=%d\n",
-		__func__, sample_rate, ratio, pixel_clk, n, cts);
+	dev_dbg(hdmi->dev, "%s: samplerate=%ukHz pixelclk=%luMHz N=%d cts=%d\n",
+		__func__, sample_rate, pixel_clk, n, cts);
 
 	spin_lock_irq(&hdmi->audio_lock);
 	hdmi->audio_n = n;
@@ -372,8 +366,7 @@ static void hdmi_set_clk_regenerator(struct dw_hdmi *hdmi,
 static void hdmi_init_clk_regenerator(struct dw_hdmi *hdmi)
 {
 	mutex_lock(&hdmi->audio_mutex);
-	hdmi_set_clk_regenerator(hdmi, 74250000, hdmi->sample_rate,
-				 hdmi->ratio);
+	hdmi_set_clk_regenerator(hdmi, 74250000, hdmi->sample_rate);
 	mutex_unlock(&hdmi->audio_mutex);
 }
 
@@ -381,7 +374,7 @@ static void hdmi_clk_regenerator_update_pixel_clock(struct dw_hdmi *hdmi)
 {
 	mutex_lock(&hdmi->audio_mutex);
 	hdmi_set_clk_regenerator(hdmi, hdmi->hdmi_data.video_mode.mpixelclock,
-				 hdmi->sample_rate, hdmi->ratio);
+				 hdmi->sample_rate);
 	mutex_unlock(&hdmi->audio_mutex);
 }
 
@@ -390,7 +383,7 @@ void dw_hdmi_set_sample_rate(struct dw_hdmi *hdmi, unsigned int rate)
 	mutex_lock(&hdmi->audio_mutex);
 	hdmi->sample_rate = rate;
 	hdmi_set_clk_regenerator(hdmi, hdmi->hdmi_data.video_mode.mpixelclock,
-				 hdmi->sample_rate, hdmi->ratio);
+				 hdmi->sample_rate);
 	mutex_unlock(&hdmi->audio_mutex);
 }
 EXPORT_SYMBOL_GPL(dw_hdmi_set_sample_rate);
@@ -1746,7 +1739,6 @@ int dw_hdmi_bind(struct device *dev, struct device *master,
 	hdmi->dev = dev;
 	hdmi->dev_type = plat_data->dev_type;
 	hdmi->sample_rate = 48000;
-	hdmi->ratio = 100;
 	hdmi->encoder = encoder;
 	hdmi->disabled = true;
 	hdmi->rxsense = true;
-- 
2.1.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

WARNING: multiple messages have this Message-ID (diff)
From: rmk+kernel@arm.linux.org.uk (Russell King)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 7/9] drm: bridge/dw_hdmi: remove ratio support from ACR code
Date: Sat, 08 Aug 2015 17:10:37 +0100	[thread overview]
Message-ID: <E1ZO6hh-0003Nc-A7@rmk-PC.arm.linux.org.uk> (raw)
In-Reply-To: <20150808160936.GN7557@n2100.arm.linux.org.uk>

We never set the ratio for CTS/N calculation for the audio clock
regenerator (ACR) to anything but 100, so this adds pointless
complexity.  Should we support pixel repetition, we should update the
CTS/N calculation code to use those parameters or the actual TMDS clock
rate instead of a ratio.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/gpu/drm/bridge/dw_hdmi.c | 44 ++++++++++++++++------------------------
 1 file changed, 18 insertions(+), 26 deletions(-)

diff --git a/drivers/gpu/drm/bridge/dw_hdmi.c b/drivers/gpu/drm/bridge/dw_hdmi.c
index 5576cd7d7abb..60487bff48e3 100644
--- a/drivers/gpu/drm/bridge/dw_hdmi.c
+++ b/drivers/gpu/drm/bridge/dw_hdmi.c
@@ -140,7 +140,6 @@ struct dw_hdmi {
 	unsigned int audio_cts;
 	unsigned int audio_n;
 	bool audio_enable;
-	int ratio;
 
 	void (*write)(struct dw_hdmi *hdmi, u8 val, int offset);
 	u8 (*read)(struct dw_hdmi *hdmi, int offset);
@@ -217,8 +216,7 @@ static void hdmi_set_cts_n(struct dw_hdmi *hdmi, unsigned int cts,
 	hdmi_writeb(hdmi, n & 0xff, HDMI_AUD_N1);
 }
 
-static unsigned int hdmi_compute_n(unsigned int freq, unsigned long pixel_clk,
-				   unsigned int ratio)
+static unsigned int hdmi_compute_n(unsigned int freq, unsigned long pixel_clk)
 {
 	unsigned int n = (128 * freq) / 1000;
 	unsigned int mult = 1;
@@ -231,9 +229,9 @@ static unsigned int hdmi_compute_n(unsigned int freq, unsigned long pixel_clk,
 	switch (freq) {
 	case 32000:
 		if (pixel_clk == 25175000)
-			n = (ratio == 150) ? 9152 : 4576;
+			n = 4576;
 		else if (pixel_clk == 27027000)
-			n = (ratio == 150) ? 8192 : 4096;
+			n = 4096;
 		else if (pixel_clk == 74176000 || pixel_clk == 148352000)
 			n = 11648;
 		else
@@ -247,7 +245,7 @@ static unsigned int hdmi_compute_n(unsigned int freq, unsigned long pixel_clk,
 		else if (pixel_clk == 74176000)
 			n = 17836;
 		else if (pixel_clk == 148352000)
-			n = (ratio == 150) ? 17836 : 8918;
+			n = 8918;
 		else
 			n = 6272;
 		n *= mult;
@@ -255,13 +253,13 @@ static unsigned int hdmi_compute_n(unsigned int freq, unsigned long pixel_clk,
 
 	case 48000:
 		if (pixel_clk == 25175000)
-			n = (ratio == 150) ? 9152 : 6864;
+			n = 6864;
 		else if (pixel_clk == 27027000)
-			n = (ratio == 150) ? 8192 : 6144;
+			n = 6144;
 		else if (pixel_clk == 74176000)
 			n = 11648;
 		else if (pixel_clk == 148352000)
-			n = (ratio == 150) ? 11648 : 5824;
+			n = 5824;
 		else
 			n = 6144;
 		n *= mult;
@@ -274,13 +272,11 @@ static unsigned int hdmi_compute_n(unsigned int freq, unsigned long pixel_clk,
 	return n;
 }
 
-static unsigned int hdmi_compute_cts(unsigned int freq, unsigned long pixel_clk,
-				     unsigned int ratio)
+static unsigned int hdmi_compute_cts(unsigned int freq, unsigned long pixel_clk)
 {
 	unsigned int cts = 0;
 
-	pr_debug("%s: freq: %d pixel_clk: %ld ratio: %d\n", __func__, freq,
-		 pixel_clk, ratio);
+	pr_debug("%s: freq: %d pixel_clk: %ld\n", __func__, freq, pixel_clk);
 
 	switch (freq) {
 	case 32000:
@@ -341,26 +337,24 @@ static unsigned int hdmi_compute_cts(unsigned int freq, unsigned long pixel_clk,
 	default:
 		break;
 	}
-	if (ratio == 100)
-		return cts;
-	return (cts * ratio) / 100;
+	return cts;
 }
 
 static void hdmi_set_clk_regenerator(struct dw_hdmi *hdmi,
-	unsigned long pixel_clk, unsigned int sample_rate, unsigned int ratio)
+	unsigned long pixel_clk, unsigned int sample_rate)
 {
 	unsigned int n, cts;
 
-	n = hdmi_compute_n(sample_rate, pixel_clk, ratio);
-	cts = hdmi_compute_cts(sample_rate, pixel_clk, ratio);
+	n = hdmi_compute_n(sample_rate, pixel_clk);
+	cts = hdmi_compute_cts(sample_rate, pixel_clk);
 	if (!cts) {
 		dev_err(hdmi->dev,
 			"%s: pixel clock/sample rate not supported: %luMHz / %ukHz\n",
 			__func__, pixel_clk, sample_rate);
 	}
 
-	dev_dbg(hdmi->dev, "%s: samplerate=%ukHz ratio=%d pixelclk=%luMHz N=%d cts=%d\n",
-		__func__, sample_rate, ratio, pixel_clk, n, cts);
+	dev_dbg(hdmi->dev, "%s: samplerate=%ukHz pixelclk=%luMHz N=%d cts=%d\n",
+		__func__, sample_rate, pixel_clk, n, cts);
 
 	spin_lock_irq(&hdmi->audio_lock);
 	hdmi->audio_n = n;
@@ -372,8 +366,7 @@ static void hdmi_set_clk_regenerator(struct dw_hdmi *hdmi,
 static void hdmi_init_clk_regenerator(struct dw_hdmi *hdmi)
 {
 	mutex_lock(&hdmi->audio_mutex);
-	hdmi_set_clk_regenerator(hdmi, 74250000, hdmi->sample_rate,
-				 hdmi->ratio);
+	hdmi_set_clk_regenerator(hdmi, 74250000, hdmi->sample_rate);
 	mutex_unlock(&hdmi->audio_mutex);
 }
 
@@ -381,7 +374,7 @@ static void hdmi_clk_regenerator_update_pixel_clock(struct dw_hdmi *hdmi)
 {
 	mutex_lock(&hdmi->audio_mutex);
 	hdmi_set_clk_regenerator(hdmi, hdmi->hdmi_data.video_mode.mpixelclock,
-				 hdmi->sample_rate, hdmi->ratio);
+				 hdmi->sample_rate);
 	mutex_unlock(&hdmi->audio_mutex);
 }
 
@@ -390,7 +383,7 @@ void dw_hdmi_set_sample_rate(struct dw_hdmi *hdmi, unsigned int rate)
 	mutex_lock(&hdmi->audio_mutex);
 	hdmi->sample_rate = rate;
 	hdmi_set_clk_regenerator(hdmi, hdmi->hdmi_data.video_mode.mpixelclock,
-				 hdmi->sample_rate, hdmi->ratio);
+				 hdmi->sample_rate);
 	mutex_unlock(&hdmi->audio_mutex);
 }
 EXPORT_SYMBOL_GPL(dw_hdmi_set_sample_rate);
@@ -1746,7 +1739,6 @@ int dw_hdmi_bind(struct device *dev, struct device *master,
 	hdmi->dev = dev;
 	hdmi->dev_type = plat_data->dev_type;
 	hdmi->sample_rate = 48000;
-	hdmi->ratio = 100;
 	hdmi->encoder = encoder;
 	hdmi->disabled = true;
 	hdmi->rxsense = true;
-- 
2.1.0

  parent reply	other threads:[~2015-08-08 16:11 UTC|newest]

Thread overview: 226+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-08-08 16:02 [PATCH 00/12] dw-hdmi development Russell King - ARM Linux
2015-08-08 16:02 ` Russell King - ARM Linux
2015-08-08 16:02 ` Russell King - ARM Linux
2015-08-08 16:03 ` [PATCH 01/12] drm: bridge/dw_hdmi: remove pixel repetition setting for all VICs Russell King
2015-08-08 16:03   ` Russell King
2015-08-08 16:03 ` [PATCH 02/12] drm: bridge/dw_hdmi: don't support any pixel doubled modes Russell King
2015-08-08 16:03   ` Russell King
2015-08-08 16:03 ` [PATCH 03/12] gpu: imx: simplify sync polarity setting Russell King
2015-08-08 16:03   ` Russell King
2015-10-06 17:57   ` Fabio Estevam
2015-10-06 17:57     ` Fabio Estevam
2015-10-06 17:57     ` Fabio Estevam
2015-08-08 16:03 ` [PATCH 04/12] gpu: imx: fix support for interlaced modes Russell King
2015-08-08 16:03   ` Russell King
2015-08-27  8:39   ` Philipp Zabel
2015-08-27  8:39     ` Philipp Zabel
2015-08-27  8:39     ` Philipp Zabel
2015-08-27  8:54     ` Russell King - ARM Linux
2015-08-27  8:54       ` Russell King - ARM Linux
2015-08-27  8:54       ` Russell King - ARM Linux
2015-08-27  9:40       ` Philipp Zabel
2015-08-27  9:40         ` Philipp Zabel
2015-08-27  9:40         ` Philipp Zabel
2015-10-06 17:59   ` Fabio Estevam
2015-10-06 17:59     ` Fabio Estevam
2015-10-06 17:59     ` Fabio Estevam
2015-08-08 16:03 ` [PATCH 05/12] drm: bridge/dw_hdmi: add support for interlaced video modes Russell King
2015-08-08 16:03   ` Russell King
2015-08-08 16:03   ` Russell King
2015-10-06 18:00   ` Fabio Estevam
2015-10-06 18:00     ` Fabio Estevam
2015-10-06 18:00     ` Fabio Estevam
2015-08-08 16:03 ` [PATCH 06/12] drm: bridge/dw_hdmi: clean up HDMI vs DVI mode handling Russell King
2015-08-08 16:03   ` Russell King
2015-10-07  3:40   ` Yakir Yang
2015-10-07  3:40     ` Yakir Yang
2015-10-07  3:40     ` Yakir Yang
2015-08-08 16:03 ` [PATCH 07/12] drm: bridge/dw_hdmi: enable audio only if sink supports audio Russell King
2015-08-08 16:03   ` Russell King
2015-10-07  3:42   ` Yakir Yang
2015-10-07  3:42     ` Yakir Yang
2015-10-07  3:42     ` Yakir Yang
2015-08-08 16:04 ` [PATCH 08/12] drm: bridge/dw_hdmi: avoid enabling interface in mode_set Russell King
2015-08-08 16:04   ` Russell King
2015-10-07  3:50   ` Yakir Yang
2015-10-07  3:50     ` Yakir Yang
2015-10-07  9:18     ` Russell King - ARM Linux
2015-10-07  9:18       ` Russell King - ARM Linux
2015-10-07  9:18       ` Russell King - ARM Linux
2015-10-07  9:35       ` Yakir Yang
2015-10-07  9:35         ` Yakir Yang
2015-10-07  9:35         ` Yakir Yang
2015-08-08 16:04 ` [PATCH 09/12] drm: bridge/dw_hdmi: rename dw_hdmi_phy_enable_power() Russell King
2015-08-08 16:04   ` Russell King
2015-08-08 16:04   ` Russell King
2015-10-07  4:00   ` Yakir Yang
2015-08-08 16:04 ` [PATCH 10/12] drm: bridge/dw_hdmi: fix phy enable/disable handling Russell King
2015-08-08 16:04   ` Russell King
2015-08-08 16:04   ` Russell King
2015-10-07  4:05   ` Yakir Yang
2015-10-07  9:48     ` Russell King - ARM Linux
2015-10-07  9:48       ` Russell King - ARM Linux
2015-10-07  9:48       ` Russell King - ARM Linux
2015-10-07 10:40       ` Yakir Yang
2015-10-07 19:17         ` Russell King - ARM Linux
2015-10-07 19:17           ` Russell King - ARM Linux
2015-10-07 19:17           ` Russell King - ARM Linux
2015-10-08  8:35           ` Yakir Yang
2015-10-08  8:35             ` Yakir Yang
2015-10-08  8:35             ` Yakir Yang
2015-08-08 16:04 ` [PATCH 11/12] drm: bridge/dw_hdmi: add connector mode forcing Russell King
2015-08-08 16:04   ` Russell King
2015-08-08 16:04   ` Russell King
2015-10-06 18:01   ` Fabio Estevam
2015-10-06 18:01     ` Fabio Estevam
2015-10-06 18:01     ` Fabio Estevam
2015-08-08 16:04 ` [PATCH 12/12] drm: bridge/dw_hdmi: improve HDMI enable/disable handling Russell King
2015-08-08 16:04   ` Russell King
2015-10-06 18:03   ` Fabio Estevam
2015-10-06 18:03     ` Fabio Estevam
2015-10-06 18:03     ` Fabio Estevam
2015-08-08 16:09 ` [PATCH 0/9] dw-hdmi audio support Russell King - ARM Linux
2015-08-08 16:09   ` Russell King - ARM Linux
2015-08-08 16:09   ` Russell King - ARM Linux
2015-08-08 16:10   ` [PATCH 1/9] drm: bridge/dw_hdmi-ahb-audio: add audio driver Russell King
2015-08-08 16:10     ` Russell King
2015-08-08 16:10     ` Russell King
2015-08-10 10:05     ` Takashi Iwai
2015-08-10 10:05       ` Takashi Iwai
2015-08-10 10:05       ` Takashi Iwai
2015-08-10 10:39       ` Russell King - ARM Linux
2015-08-10 10:39         ` Russell King - ARM Linux
2015-08-10 10:39         ` Russell King - ARM Linux
2015-08-10 12:23         ` Takashi Iwai
2015-08-10 12:23           ` Takashi Iwai
2015-08-10 12:23           ` Takashi Iwai
2015-08-10 16:49           ` Russell King - ARM Linux
2015-08-10 16:49             ` Russell King - ARM Linux
2015-08-10 16:49             ` Russell King - ARM Linux
2015-08-10 18:16             ` Mark Brown
2015-08-10 18:16               ` Mark Brown
2015-08-14 13:54       ` [PATCH v2 1/9] drm: bridge/dw_hdmi-ahb-audio: add audio driver David Airlie <airlied@linux.ie>, Sascha Hauer <s.hauer@pengutronix.de>, linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org, Jaroslav Kysela <perex@perex.cz>, linux-rockchip@lists.infradead.org, Mark Brown <broonie@kernel.org>, Philipp Zabel <p.zabel@pengutronix.de>, Yakir Yang <ykk@rock-chips.com>, Andy Yan <andy.yan@rock-chips.com>, Jon Nettleton <jon.nettleton@gmail.com>, linux-arm-kernel@lists.infradead.org Russell King
2015-08-14 13:54         ` Russell King
2015-08-14 13:54         ` Russell King
2015-08-14 14:04       ` [PATCH v2 1/9] drm: bridge/dw_hdmi-ahb-audio: add audio driver Russell King
2015-08-14 14:04         ` Russell King
2015-08-14 14:04         ` Russell King
2015-08-14 14:34         ` [alsa-devel] " Takashi Iwai
2015-08-14 14:34           ` Takashi Iwai
2015-08-14 14:34           ` Takashi Iwai
2015-10-06 18:07     ` [PATCH " Fabio Estevam
2015-10-06 18:07       ` Fabio Estevam
2015-10-06 18:07       ` Fabio Estevam
2015-10-06 18:18       ` Russell King - ARM Linux
2015-10-06 18:18         ` Russell King - ARM Linux
2015-10-06 18:18         ` Russell King - ARM Linux
2015-10-06 18:45         ` Fabio Estevam
2015-10-06 18:45           ` Fabio Estevam
2015-10-06 18:45           ` Fabio Estevam
2015-10-06 18:54           ` Russell King - ARM Linux
2015-10-06 18:54             ` Russell King - ARM Linux
2015-10-06 18:54             ` Russell King - ARM Linux
2015-10-06 20:25             ` Fabio Estevam
2015-10-06 20:25               ` Fabio Estevam
2015-10-06 20:25               ` Fabio Estevam
2015-10-09 16:00               ` Russell King - ARM Linux
2015-10-09 16:00                 ` Russell King - ARM Linux
2015-10-09 16:00                 ` Russell King - ARM Linux
2015-10-09 16:02                 ` Fabio Estevam
2015-10-09 16:02                   ` Fabio Estevam
2015-10-09 16:02                   ` Fabio Estevam
2015-10-09 16:11                   ` Russell King - ARM Linux
2015-10-09 16:11                     ` Russell King - ARM Linux
2015-10-09 16:11                     ` Russell King - ARM Linux
2015-08-08 16:10   ` [PATCH 2/9] drm: bridge/dw_hdmi-ahb-audio: parse ELD from HDMI driver Russell King
2015-08-08 16:10     ` Russell King
2015-08-08 16:10     ` Russell King
2015-08-08 16:10   ` [PATCH 3/9] drm: bridge/dw_hdmi-ahb-audio: basic support for multi-channel PCM audio Russell King
2015-08-08 16:10     ` Russell King
2015-08-08 16:10   ` [PATCH 4/9] drm: bridge/dw_hdmi-ahb-audio: allow larger buffer sizes Russell King
2015-08-08 16:10     ` Russell King
2015-08-08 16:10     ` Russell King
2015-08-08 16:10   ` [PATCH 5/9] drm: bridge/dw_hdmi: avoid being recursive in N calculation Russell King
2015-08-08 16:10     ` Russell King
2015-08-08 16:10     ` Russell King
2015-09-04 17:50     ` Doug Anderson
2015-09-04 17:50       ` Doug Anderson
2015-09-04 17:50       ` Doug Anderson
2015-08-08 16:10   ` [PATCH 6/9] drm: bridge/dw_hdmi: adjust pixel clock values " Russell King
2015-08-08 16:10     ` Russell King
2015-08-08 16:10     ` Russell King
2015-09-04 18:21     ` Doug Anderson
2015-09-04 18:21       ` Doug Anderson
2015-09-04 18:21       ` Doug Anderson
2015-09-04 19:48       ` Doug Anderson
2015-09-04 19:48         ` Doug Anderson
2015-09-04 19:48         ` Doug Anderson
2015-09-04 21:24         ` Russell King - ARM Linux
2015-09-04 21:24           ` Russell King - ARM Linux
2015-09-04 21:24           ` Russell King - ARM Linux
2015-09-04 23:50           ` Doug Anderson
2015-09-04 23:50             ` Doug Anderson
2015-09-04 23:50             ` Doug Anderson
2015-09-05  0:27             ` Russell King - ARM Linux
2015-09-05  0:27               ` Russell King - ARM Linux
2015-09-05  0:27               ` Russell King - ARM Linux
2015-09-05  2:03               ` Doug Anderson
2015-09-05  2:03                 ` Doug Anderson
2015-09-05  2:03                 ` Doug Anderson
2015-09-05  8:31                 ` Russell King - ARM Linux
2015-09-05  8:31                   ` Russell King - ARM Linux
2015-09-05  8:31                   ` Russell King - ARM Linux
2015-09-05 13:46                   ` Doug Anderson
2015-09-05 13:46                     ` Doug Anderson
2015-09-05 13:46                     ` Doug Anderson
2015-09-05 14:01                     ` Russell King - ARM Linux
2015-09-05 14:01                       ` Russell King - ARM Linux
2015-09-05 14:01                       ` Russell King - ARM Linux
2015-09-05 19:44                       ` Doug Anderson
2015-09-05 19:44                         ` Doug Anderson
2015-09-05 19:44                         ` Doug Anderson
2015-09-05  8:34                 ` Russell King - ARM Linux
2015-09-05  8:34                   ` Russell King - ARM Linux
2015-09-05  8:34                   ` Russell King - ARM Linux
2015-09-05 13:50                   ` Doug Anderson
2015-09-05 13:50                     ` Doug Anderson
2015-09-05 13:50                     ` Doug Anderson
2015-08-08 16:10   ` Russell King [this message]
2015-08-08 16:10     ` [PATCH 7/9] drm: bridge/dw_hdmi: remove ratio support from ACR code Russell King
2015-08-08 16:10     ` Russell King
2015-09-04 18:24     ` Doug Anderson
2015-09-04 18:24       ` Doug Anderson
2015-09-04 18:24       ` Doug Anderson
2015-08-08 16:10   ` [PATCH 8/9] drm: bridge/dw_hdmi: replace CTS calculation for the ACR Russell King
2015-08-08 16:10     ` Russell King
2015-09-04 20:00     ` Doug Anderson
2015-09-04 20:00       ` Doug Anderson
2015-09-04 20:00       ` Doug Anderson
2015-08-08 16:10   ` [PATCH 9/9] drm: bridge/dw_hdmi-i2s-audio: add audio driver Russell King
2015-08-08 16:10     ` Russell King
2015-08-10 15:48     ` Russell King - ARM Linux
2015-08-10 15:48       ` Russell King - ARM Linux
2015-08-10 15:48       ` Russell King - ARM Linux
2015-08-10 16:26       ` Yakir Yang
2015-08-10 16:26         ` Yakir Yang
2015-08-10 16:26         ` Yakir Yang
2015-08-27  8:42   ` [PATCH 0/9] dw-hdmi audio support Philipp Zabel
2015-08-27  8:42     ` Philipp Zabel
2015-08-27  8:42     ` Philipp Zabel
2016-01-05 15:40     ` [alsa-devel] " Jean-Michel Hautbois
2016-01-05 15:40       ` Jean-Michel Hautbois
2016-01-05 15:54       ` Fabio Estevam
2016-01-05 15:54         ` Fabio Estevam
2016-01-05 15:54         ` Fabio Estevam
2016-01-05 16:04       ` Russell King - ARM Linux
2016-01-05 16:04         ` Russell King - ARM Linux
2016-01-05 16:04         ` Russell King - ARM Linux
2016-01-07  8:21         ` Jean-Michel Hautbois
2016-01-07  8:21           ` Jean-Michel Hautbois
2016-01-07  8:21           ` Jean-Michel Hautbois
2015-08-10 12:21 ` [PATCH 00/12] dw-hdmi development Thierry Reding
2015-08-10 12:21   ` Thierry Reding
2015-08-10 12:21   ` Thierry Reding
2015-08-18 10:37   ` Russell King - ARM Linux
2015-08-18 10:37     ` Russell King - ARM Linux
2015-08-18 10:37     ` Russell King - ARM Linux

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=E1ZO6hh-0003Nc-A7@rmk-PC.arm.linux.org.uk \
    --to=rmk+kernel@arm.linux.org.uk \
    --cc=airlied@linux.ie \
    --cc=alsa-devel@alsa-project.org \
    --cc=andy.yan@rock-chips.com \
    --cc=broonie@kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=fabio.estevam@freescale.com \
    --cc=jon.nettleton@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=p.zabel@pengutronix.de \
    --cc=perex@perex.cz \
    --cc=s.hauer@pengutronix.de \
    --cc=tiwai@suse.de \
    --cc=ykk@rock-chips.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.