All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Wu, Feng" <feng.wu@intel.com>
To: "pbonzini@redhat.com" <pbonzini@redhat.com>,
	"alex.williamson@redhat.com" <alex.williamson@redhat.com>,
	"joro@8bytes.org" <joro@8bytes.org>,
	"mtosatti@redhat.com" <mtosatti@redhat.com>
Cc: "eric.auger@linaro.org" <eric.auger@linaro.org>,
	"kvm@vger.kernel.org" <kvm@vger.kernel.org>,
	"iommu@lists.linux-foundation.org"
	<iommu@lists.linux-foundation.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"Wu, Feng" <feng.wu@intel.com>
Subject: RE: [PATCH v9 12/18] vfio: Register/unregister irq_bypass_producer
Date: Mon, 21 Sep 2015 08:56:11 +0000	[thread overview]
Message-ID: <E959C4978C3B6342920538CF579893F00272346C@SHSMSX104.ccr.corp.intel.com> (raw)
In-Reply-To: <1442586596-5920-13-git-send-email-feng.wu@intel.com>

Hi Paolo & Alex,

I find that there is a build error in the following two cases:
- KVM is configured as 'M' and VFIO as 'Y'
The reason is the build of irqbypass manager is triggered in
arch/x86/kvm/Makefile, and VFIO is built before KVM, hence
it cannot find the symbols in irqbypass manager.

- Disable KVM and enable VFIO in .config
The reason is similar with the above one, the irqbypass manager
is not built since KVM is not configured.

I think the point is that we cannot trigger the build of irqbypass
manager inside KVM or VFIO, we need trigger the build at a high
level and it should be built before VFIO and KVM. Any ideas?

Thanks,
Feng

> -----Original Message-----
> From: Wu, Feng
> Sent: Friday, September 18, 2015 10:30 PM
> To: pbonzini@redhat.com; alex.williamson@redhat.com; joro@8bytes.org;
> mtosatti@redhat.com
> Cc: eric.auger@linaro.org; kvm@vger.kernel.org;
> iommu@lists.linux-foundation.org; linux-kernel@vger.kernel.org; Wu, Feng
> Subject: [PATCH v9 12/18] vfio: Register/unregister irq_bypass_producer
> 
> This patch adds the registration/unregistration of an
> irq_bypass_producer for MSI/MSIx on vfio pci devices.
> 
> Signed-off-by: Feng Wu <feng.wu@intel.com>
> ---
> v8:
> - Merge "[PATCH v7 08/17] vfio: Select IRQ_BYPASS_MANAGER for vfio PCI
> devices"
>   into this patch.
> 
> v6:
> - Make the add_consumer and del_consumer callbacks static
> - Remove pointless INIT_LIST_HEAD to 'vdev->ctx[vector].producer.node)'
> - Use dev_info instead of WARN_ON() when irq_bypass_register_producer fails
> - Remove optional dummy callbacks for irq producer
> 
>  drivers/vfio/pci/Kconfig            | 1 +
>  drivers/vfio/pci/vfio_pci_intrs.c   | 9 +++++++++
>  drivers/vfio/pci/vfio_pci_private.h | 2 ++
>  3 files changed, 12 insertions(+)
> 
> diff --git a/drivers/vfio/pci/Kconfig b/drivers/vfio/pci/Kconfig
> index 579d83b..02912f1 100644
> --- a/drivers/vfio/pci/Kconfig
> +++ b/drivers/vfio/pci/Kconfig
> @@ -2,6 +2,7 @@ config VFIO_PCI
>  	tristate "VFIO support for PCI devices"
>  	depends on VFIO && PCI && EVENTFD
>  	select VFIO_VIRQFD
> +	select IRQ_BYPASS_MANAGER
>  	help
>  	  Support for the PCI VFIO bus driver.  This is required to make
>  	  use of PCI drivers using the VFIO framework.
> diff --git a/drivers/vfio/pci/vfio_pci_intrs.c b/drivers/vfio/pci/vfio_pci_intrs.c
> index 1f577b4..c65299d 100644
> --- a/drivers/vfio/pci/vfio_pci_intrs.c
> +++ b/drivers/vfio/pci/vfio_pci_intrs.c
> @@ -319,6 +319,7 @@ static int vfio_msi_set_vector_signal(struct
> vfio_pci_device *vdev,
> 
>  	if (vdev->ctx[vector].trigger) {
>  		free_irq(irq, vdev->ctx[vector].trigger);
> +		irq_bypass_unregister_producer(&vdev->ctx[vector].producer);
>  		kfree(vdev->ctx[vector].name);
>  		eventfd_ctx_put(vdev->ctx[vector].trigger);
>  		vdev->ctx[vector].trigger = NULL;
> @@ -360,6 +361,14 @@ static int vfio_msi_set_vector_signal(struct
> vfio_pci_device *vdev,
>  		return ret;
>  	}
> 
> +	vdev->ctx[vector].producer.token = trigger;
> +	vdev->ctx[vector].producer.irq = irq;
> +	ret = irq_bypass_register_producer(&vdev->ctx[vector].producer);
> +	if (unlikely(ret))
> +		dev_info(&pdev->dev,
> +		"irq bypass producer (token %p) registeration fails: %d\n",
> +		vdev->ctx[vector].producer.token, ret);
> +
>  	vdev->ctx[vector].trigger = trigger;
> 
>  	return 0;
> diff --git a/drivers/vfio/pci/vfio_pci_private.h
> b/drivers/vfio/pci/vfio_pci_private.h
> index ae0e1b4..0e7394f 100644
> --- a/drivers/vfio/pci/vfio_pci_private.h
> +++ b/drivers/vfio/pci/vfio_pci_private.h
> @@ -13,6 +13,7 @@
> 
>  #include <linux/mutex.h>
>  #include <linux/pci.h>
> +#include <linux/irqbypass.h>
> 
>  #ifndef VFIO_PCI_PRIVATE_H
>  #define VFIO_PCI_PRIVATE_H
> @@ -29,6 +30,7 @@ struct vfio_pci_irq_ctx {
>  	struct virqfd		*mask;
>  	char			*name;
>  	bool			masked;
> +	struct irq_bypass_producer	producer;
>  };
> 
>  struct vfio_pci_device {
> --
> 2.1.0


WARNING: multiple messages have this Message-ID (diff)
From: "Wu, Feng" <feng.wu-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
To: "pbonzini-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org"
	<pbonzini-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>,
	"alex.williamson-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org"
	<alex.williamson-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>,
	"joro-zLv9SwRftAIdnm+yROfE0A@public.gmane.org"
	<joro-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>,
	"mtosatti-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org"
	<mtosatti-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Cc: "iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org"
	<iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org>,
	"linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
	<linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
	"kvm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
	<kvm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
	"eric.auger-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org"
	<eric.auger-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Subject: RE: [PATCH v9 12/18] vfio: Register/unregister irq_bypass_producer
Date: Mon, 21 Sep 2015 08:56:11 +0000	[thread overview]
Message-ID: <E959C4978C3B6342920538CF579893F00272346C@SHSMSX104.ccr.corp.intel.com> (raw)
In-Reply-To: <1442586596-5920-13-git-send-email-feng.wu-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>

Hi Paolo & Alex,

I find that there is a build error in the following two cases:
- KVM is configured as 'M' and VFIO as 'Y'
The reason is the build of irqbypass manager is triggered in
arch/x86/kvm/Makefile, and VFIO is built before KVM, hence
it cannot find the symbols in irqbypass manager.

- Disable KVM and enable VFIO in .config
The reason is similar with the above one, the irqbypass manager
is not built since KVM is not configured.

I think the point is that we cannot trigger the build of irqbypass
manager inside KVM or VFIO, we need trigger the build at a high
level and it should be built before VFIO and KVM. Any ideas?

Thanks,
Feng

> -----Original Message-----
> From: Wu, Feng
> Sent: Friday, September 18, 2015 10:30 PM
> To: pbonzini-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org; alex.williamson-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org; joro-zLv9SwRftAIdnm+yROfE0A@public.gmane.org;
> mtosatti-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
> Cc: eric.auger-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org; kvm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org;
> iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org; linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org; Wu, Feng
> Subject: [PATCH v9 12/18] vfio: Register/unregister irq_bypass_producer
> 
> This patch adds the registration/unregistration of an
> irq_bypass_producer for MSI/MSIx on vfio pci devices.
> 
> Signed-off-by: Feng Wu <feng.wu-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
> ---
> v8:
> - Merge "[PATCH v7 08/17] vfio: Select IRQ_BYPASS_MANAGER for vfio PCI
> devices"
>   into this patch.
> 
> v6:
> - Make the add_consumer and del_consumer callbacks static
> - Remove pointless INIT_LIST_HEAD to 'vdev->ctx[vector].producer.node)'
> - Use dev_info instead of WARN_ON() when irq_bypass_register_producer fails
> - Remove optional dummy callbacks for irq producer
> 
>  drivers/vfio/pci/Kconfig            | 1 +
>  drivers/vfio/pci/vfio_pci_intrs.c   | 9 +++++++++
>  drivers/vfio/pci/vfio_pci_private.h | 2 ++
>  3 files changed, 12 insertions(+)
> 
> diff --git a/drivers/vfio/pci/Kconfig b/drivers/vfio/pci/Kconfig
> index 579d83b..02912f1 100644
> --- a/drivers/vfio/pci/Kconfig
> +++ b/drivers/vfio/pci/Kconfig
> @@ -2,6 +2,7 @@ config VFIO_PCI
>  	tristate "VFIO support for PCI devices"
>  	depends on VFIO && PCI && EVENTFD
>  	select VFIO_VIRQFD
> +	select IRQ_BYPASS_MANAGER
>  	help
>  	  Support for the PCI VFIO bus driver.  This is required to make
>  	  use of PCI drivers using the VFIO framework.
> diff --git a/drivers/vfio/pci/vfio_pci_intrs.c b/drivers/vfio/pci/vfio_pci_intrs.c
> index 1f577b4..c65299d 100644
> --- a/drivers/vfio/pci/vfio_pci_intrs.c
> +++ b/drivers/vfio/pci/vfio_pci_intrs.c
> @@ -319,6 +319,7 @@ static int vfio_msi_set_vector_signal(struct
> vfio_pci_device *vdev,
> 
>  	if (vdev->ctx[vector].trigger) {
>  		free_irq(irq, vdev->ctx[vector].trigger);
> +		irq_bypass_unregister_producer(&vdev->ctx[vector].producer);
>  		kfree(vdev->ctx[vector].name);
>  		eventfd_ctx_put(vdev->ctx[vector].trigger);
>  		vdev->ctx[vector].trigger = NULL;
> @@ -360,6 +361,14 @@ static int vfio_msi_set_vector_signal(struct
> vfio_pci_device *vdev,
>  		return ret;
>  	}
> 
> +	vdev->ctx[vector].producer.token = trigger;
> +	vdev->ctx[vector].producer.irq = irq;
> +	ret = irq_bypass_register_producer(&vdev->ctx[vector].producer);
> +	if (unlikely(ret))
> +		dev_info(&pdev->dev,
> +		"irq bypass producer (token %p) registeration fails: %d\n",
> +		vdev->ctx[vector].producer.token, ret);
> +
>  	vdev->ctx[vector].trigger = trigger;
> 
>  	return 0;
> diff --git a/drivers/vfio/pci/vfio_pci_private.h
> b/drivers/vfio/pci/vfio_pci_private.h
> index ae0e1b4..0e7394f 100644
> --- a/drivers/vfio/pci/vfio_pci_private.h
> +++ b/drivers/vfio/pci/vfio_pci_private.h
> @@ -13,6 +13,7 @@
> 
>  #include <linux/mutex.h>
>  #include <linux/pci.h>
> +#include <linux/irqbypass.h>
> 
>  #ifndef VFIO_PCI_PRIVATE_H
>  #define VFIO_PCI_PRIVATE_H
> @@ -29,6 +30,7 @@ struct vfio_pci_irq_ctx {
>  	struct virqfd		*mask;
>  	char			*name;
>  	bool			masked;
> +	struct irq_bypass_producer	producer;
>  };
> 
>  struct vfio_pci_device {
> --
> 2.1.0

  parent reply	other threads:[~2015-09-21  8:57 UTC|newest]

Thread overview: 107+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-09-18 14:29 [PATCH v9 00/18] Add VT-d Posted-Interrupts support - including prerequisite series Feng Wu
2015-09-18 14:29 ` Feng Wu
2015-09-18 14:29 ` [PATCH v9 01/18] virt: IRQ bypass manager Feng Wu
2015-09-18 14:29   ` Feng Wu
2015-09-18 15:34   ` Wu, Feng
2015-09-18 15:34     ` Wu, Feng
2015-09-18 14:29 ` [PATCH v9 02/18] KVM: x86: select IRQ_BYPASS_MANAGER Feng Wu
2015-09-18 14:29   ` Feng Wu
2015-09-18 14:29 ` [PATCH v9 03/18] KVM: arm/arm64: " Feng Wu
2015-09-21 19:32   ` Eric Auger
2015-09-18 14:29 ` [PATCH v9 04/18] KVM: create kvm_irqfd.h Feng Wu
2015-09-18 14:29   ` Feng Wu
2015-09-18 15:35   ` Wu, Feng
2015-09-18 15:35     ` Wu, Feng
2015-09-18 14:29 ` [PATCH v9 05/18] KVM: introduce kvm_arch functions for IRQ bypass Feng Wu
2015-09-18 14:29   ` Feng Wu
2015-09-18 14:29 ` [PATCH v9 06/18] KVM: eventfd: add irq bypass consumer management Feng Wu
2015-09-18 14:29   ` Feng Wu
2015-09-18 14:29 ` [PATCH v9 07/18] KVM: Extend struct pi_desc for VT-d Posted-Interrupts Feng Wu
2015-09-18 14:29   ` Feng Wu
2015-09-18 14:29 ` [PATCH v9 08/18] KVM: Add some helper functions for Posted-Interrupts Feng Wu
2015-09-18 14:29 ` [PATCH v9 09/18] KVM: Define a new interface kvm_intr_is_single_vcpu() Feng Wu
2015-09-18 14:29   ` Feng Wu
2015-09-18 14:29 ` [PATCH v9 10/18] KVM: Make struct kvm_irq_routing_table accessible Feng Wu
2015-09-18 14:29 ` [PATCH v9 11/18] KVM: make kvm_set_msi_irq() public Feng Wu
2015-09-18 14:29   ` Feng Wu
2015-09-18 14:29 ` [PATCH v9 12/18] vfio: Register/unregister irq_bypass_producer Feng Wu
2015-09-18 14:29   ` Feng Wu
2015-09-18 17:19   ` Alex Williamson
2015-09-18 17:19     ` Alex Williamson
2015-09-21  8:56   ` Wu, Feng [this message]
2015-09-21  8:56     ` Wu, Feng
2015-09-21  9:32     ` Paolo Bonzini
2015-09-21  9:32       ` Paolo Bonzini
2015-09-21 11:35       ` Wu, Feng
2015-09-21 11:35         ` Wu, Feng
2015-09-21 12:06         ` Paolo Bonzini
2015-09-21 12:06           ` Paolo Bonzini
2015-09-21 12:08           ` Wu, Feng
2015-09-21 12:08             ` Wu, Feng
2015-09-21 12:53       ` Wu, Feng
2015-09-21 12:53         ` Wu, Feng
2015-09-21 13:02         ` Paolo Bonzini
2015-09-21 19:46           ` Eric Auger
2015-09-21 19:46             ` Eric Auger
2016-04-26 20:08   ` Alex Williamson
2016-04-26 20:08     ` Alex Williamson
2016-04-27  1:32     ` Wu, Feng
2016-04-27  1:32       ` Wu, Feng
2016-04-28 16:40       ` Alex Williamson
2016-04-28 16:40         ` Alex Williamson
2016-04-28 15:35     ` Eric Auger
2016-04-28 15:35       ` Eric Auger
2015-09-18 14:29 ` [PATCH v9 13/18] KVM: x86: Update IRTE for posted-interrupts Feng Wu
2015-09-18 14:29   ` Feng Wu
2015-09-18 14:29 ` [PATCH v9 14/18] KVM: Implement IRQ bypass consumer callbacks for x86 Feng Wu
2015-09-18 14:29   ` Feng Wu
2015-09-18 14:29 ` [PATCH v9 15/18] KVM: Add an arch specific hooks in 'struct kvm_kernel_irqfd' Feng Wu
2015-09-18 14:29   ` Feng Wu
2015-09-18 14:29 ` [PATCH v9 16/18] KVM: Update Posted-Interrupts Descriptor when vCPU is preempted Feng Wu
2015-09-18 14:29   ` Feng Wu
2015-09-18 14:29 ` [PATCH v9 17/18] KVM: Update Posted-Interrupts Descriptor when vCPU is blocked Feng Wu
2015-09-18 14:29   ` Feng Wu
2015-09-18 16:06   ` Paolo Bonzini
2015-09-18 16:06     ` Paolo Bonzini
2015-09-19  7:11     ` Wu, Feng
2015-09-19  7:11       ` Wu, Feng
2015-09-21  2:16     ` Wu, Feng
2015-09-21  5:32       ` Paolo Bonzini
2015-09-21  5:32         ` Paolo Bonzini
2015-09-21  5:45         ` Wu, Feng
2015-09-21  5:45           ` Wu, Feng
2015-10-14 23:41   ` David Matlack
2015-10-15  1:33     ` Wu, Feng
2015-10-15  1:33       ` Wu, Feng
2015-10-15 17:39       ` David Matlack
2015-10-15 18:13         ` Paolo Bonzini
2015-10-15 18:13           ` Paolo Bonzini
2015-10-16  1:45           ` Wu, Feng
2015-10-16  1:45             ` Wu, Feng
2015-09-18 14:29 ` [PATCH v9 18/18] iommu/vt-d: Add a command line parameter for VT-d posted-interrupts Feng Wu
2015-09-18 14:29   ` Feng Wu
2015-09-21 13:46   ` Joerg Roedel
2015-09-21 13:46     ` Joerg Roedel
2015-09-18 14:58 ` [PATCH v9 00/18] Add VT-d Posted-Interrupts support - including prerequisite series Paolo Bonzini
2015-09-18 14:58   ` Paolo Bonzini
2015-09-18 15:08   ` Wu, Feng
2015-09-18 15:08     ` Wu, Feng
2015-09-18 15:21     ` Paolo Bonzini
2015-09-18 15:21       ` Paolo Bonzini
2015-09-18 15:38       ` Wu, Feng
2015-09-18 17:57   ` Alex Williamson
2015-09-18 17:57     ` Alex Williamson
2015-09-25  1:49 ` Wu, Feng
2015-09-25  1:49   ` Wu, Feng
2015-09-25 11:14   ` Paolo Bonzini
2015-09-25 11:14     ` Paolo Bonzini
2015-09-28 10:14     ` Wu, Feng
2015-09-28 10:14       ` Wu, Feng
2015-09-28 10:18       ` Paolo Bonzini
2015-09-28 10:18         ` Paolo Bonzini
2015-09-28 10:22         ` Wu, Feng
2015-09-28 10:22           ` Wu, Feng
2015-09-22  9:01 [PATCH v9 12/18] vfio: Register/unregister irq_bypass_producer Wu, Feng
2015-09-22  9:01 ` Wu, Feng
2015-09-23  1:35 ` Eric Auger
2015-09-23  1:35   ` Eric Auger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=E959C4978C3B6342920538CF579893F00272346C@SHSMSX104.ccr.corp.intel.com \
    --to=feng.wu@intel.com \
    --cc=alex.williamson@redhat.com \
    --cc=eric.auger@linaro.org \
    --cc=iommu@lists.linux-foundation.org \
    --cc=joro@8bytes.org \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mtosatti@redhat.com \
    --cc=pbonzini@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.