All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jeff Johnson <quic_jjohnson@quicinc.com>
To: <ath11k@lists.infradead.org>
Subject: Re: [PATCH 2/2] ath11k: mhi: use mhi_sync_power_up()
Date: Thu, 27 Jan 2022 15:36:54 -0800	[thread overview]
Message-ID: <a0f8c8fa-2f26-e522-a3b9-e530aba9994b@quicinc.com> (raw)
In-Reply-To: <20220127090117.2024-2-kvalo@kernel.org>

On 1/27/2022 1:01 AM, Kalle Valo wrote:
> From: Kalle Valo <quic_kvalo@quicinc.com>
> 
> If amss.bin was missing ath11k would crash during 'rmmod ath11k_pci'. The
> reason for that was that we were using mhi_async_power_up() which does not
> check any errors. But mhi_sync_power_up() on the other hand does check for
> errors so let's use that to fix the crash.
> 
> I was not able to find a reason why an async version was used. This call ends
> is called from ath11k_hif_power_up() which can sleep, so sync version should be
> safe to use.

I could not parse the 2nd sentence: This call ends is called

> 
> [  145.569731] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN PTI
> [  145.569789] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
> [  145.569843] CPU: 2 PID: 1628 Comm: rmmod Kdump: loaded Tainted: G        W         5.16.0-wt-ath+ #567
> [  145.569898] Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0067.2021.0528.1339 05/28/2021
> [  145.569956] RIP: 0010:ath11k_hal_srng_access_begin+0xb5/0x2b0 [ath11k]
> [  145.570028] Code: df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 ec 01 00 00 48 8b ab a8 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 ea 48 c1 ea 03 <0f> b6 14 02 48 89 e8 83 e0 07 83 c0 03 45 85 ed 75 48 38 d0 7c 08
> [  145.570089] RSP: 0018:ffffc900025d7ac0 EFLAGS: 00010246
> [  145.570144] RAX: dffffc0000000000 RBX: ffff88814fca2dd8 RCX: 1ffffffff50cb455
> [  145.570196] RDX: 0000000000000000 RSI: ffff88814fca2dd8 RDI: ffff88814fca2e80
> [  145.570252] RBP: 0000000000000000 R08: 0000000000000000 R09: ffffffffa8659497
> [  145.570329] R10: fffffbfff50cb292 R11: 0000000000000001 R12: ffff88814fca0000
> [  145.570410] R13: 0000000000000000 R14: ffff88814fca2798 R15: ffff88814fca2dd8
> [  145.570465] FS:  00007fa399988540(0000) GS:ffff888233e00000(0000) knlGS:0000000000000000
> [  145.570519] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [  145.570571] CR2: 00007fa399b51421 CR3: 0000000137898002 CR4: 00000000003706e0
> [  145.570623] Call Trace:
> [  145.570675]  <TASK>
> [  145.570727]  ? ath11k_ce_tx_process_cb+0x34b/0x860 [ath11k]
> [  145.570797]  ath11k_ce_tx_process_cb+0x356/0x860 [ath11k]
> [  145.570864]  ? tasklet_init+0x150/0x150
> [  145.570919]  ? ath11k_ce_alloc_pipes+0x280/0x280 [ath11k]
> [  145.570986]  ? tasklet_clear_sched+0x42/0xe0
> [  145.571042]  ? tasklet_kill+0xe9/0x1b0
> [  145.571095]  ? tasklet_clear_sched+0xe0/0xe0
> [  145.571148]  ? irq_has_action+0x120/0x120
> [  145.571202]  ath11k_ce_cleanup_pipes+0x45a/0x580 [ath11k]
> [  145.571270]  ? ath11k_pci_stop+0x10e/0x170 [ath11k_pci]
> [  145.571345]  ath11k_core_stop+0x8a/0xc0 [ath11k]
> [  145.571434]  ath11k_core_deinit+0x9e/0x150 [ath11k]
> [  145.571499]  ath11k_pci_remove+0xd2/0x260 [ath11k_pci]
> [  145.571553]  pci_device_remove+0x9a/0x1c0
> [  145.571605]  __device_release_driver+0x332/0x660
> [  145.571659]  driver_detach+0x1e7/0x2c0
> [  145.571712]  bus_remove_driver+0xe2/0x2d0
> [  145.571772]  pci_unregister_driver+0x21/0x250
> [  145.571826]  __do_sys_delete_module+0x30a/0x4b0
> [  145.571879]  ? free_module+0xac0/0xac0
> [  145.571933]  ? lockdep_hardirqs_on_prepare.part.0+0x18c/0x370
> [  145.571986]  ? syscall_enter_from_user_mode+0x1d/0x50
> [  145.572039]  ? lockdep_hardirqs_on+0x79/0x100
> [  145.572097]  do_syscall_64+0x3b/0x90
> [  145.572153]  entry_SYSCALL_64_after_hwframe+0x44/0xae
> 
> Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2
> 
> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
> ---
>   drivers/net/wireless/ath/ath11k/mhi.c | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/net/wireless/ath/ath11k/mhi.c b/drivers/net/wireless/ath/ath11k/mhi.c
> index cccaa348cf21..8b2143802816 100644
> --- a/drivers/net/wireless/ath/ath11k/mhi.c
> +++ b/drivers/net/wireless/ath/ath11k/mhi.c
> @@ -561,7 +561,7 @@ static int ath11k_mhi_set_state(struct ath11k_pci *ab_pci,
>   		ret = 0;
>   		break;
>   	case ATH11K_MHI_POWER_ON:
> -		ret = mhi_async_power_up(ab_pci->mhi_ctrl);
> +		ret = mhi_sync_power_up(ab_pci->mhi_ctrl);
>   		break;
>   	case ATH11K_MHI_POWER_OFF:
>   		mhi_power_down(ab_pci->mhi_ctrl, true);
> 


-- 
ath11k mailing list
ath11k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath11k

  reply	other threads:[~2022-01-27 23:37 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-27  9:01 [PATCH 1/2] ath11k: pci: fix crash on suspend if board file is not found Kalle Valo
2022-01-27  9:01 ` Kalle Valo
2022-01-27  9:01 ` [PATCH 2/2] ath11k: mhi: use mhi_sync_power_up() Kalle Valo
2022-01-27  9:01   ` Kalle Valo
2022-01-27 23:36   ` Jeff Johnson [this message]
2022-01-28  9:06     ` Kalle Valo
2022-01-31 14:11 ` [PATCH 1/2] ath11k: pci: fix crash on suspend if board file is not found Kalle Valo
2022-01-31 14:11   ` Kalle Valo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=a0f8c8fa-2f26-e522-a3b9-e530aba9994b@quicinc.com \
    --to=quic_jjohnson@quicinc.com \
    --cc=ath11k@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.