From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> To: Walker Chen <walker.chen@starfivetech.com>, linux-riscv@lists.infradead.org, linux-pm@vger.kernel.org, devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor.dooley@microchip.com>, Emil Renner Berthing <emil.renner.berthing@canonical.com>, "Rafael J . Wysocki" <rafael@kernel.org>, linux-kernel@vger.kernel.org Subject: Re: [RESEND PATCH v2 1/3] dt-bindings: power: Add starfive,jh71xx-pmu Date: Thu, 8 Dec 2022 10:03:33 +0100 [thread overview] Message-ID: <ac374e10-fb5b-c56c-7c76-b131446533fe@linaro.org> (raw) In-Reply-To: <20221208084523.9733-2-walker.chen@starfivetech.com> On 08/12/2022 09:45, Walker Chen wrote: > Add bindings for Power Management Unit (PMU) on the StarFive JH71XX SoC. > > Signed-off-by: Walker Chen <walker.chen@starfivetech.com> > + }; > diff --git a/include/dt-bindings/power/starfive,jh7110-pmu.h b/include/dt-bindings/power/starfive,jh7110-pmu.h > new file mode 100644 > index 000000000000..73c6a79a2181 > --- /dev/null > +++ b/include/dt-bindings/power/starfive,jh7110-pmu.h > @@ -0,0 +1,17 @@ > +/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */ Why different license than the bindings? MIT is pretty compatible, but if it does not matter for you, keep same licenses as bindings. > +/* > + * Copyright (C) 2022 StarFive Technology Co., Ltd. > + * Author: Walker Chen <walker.chen@starfivetech.com> > + */ > +#ifndef __DT_BINDINGS_POWER_JH7110_POWER_H__ > +#define __DT_BINDINGS_POWER_JH7110_POWER_H__ > + > +#define JH7110_PD_SYSTOP 0 > +#define JH7110_PD_CPU 1 > +#define JH7110_PD_GPUA 2 > +#define JH7110_PD_VDEC 3 > +#define JH7110_PD_VOUT 4 > +#define JH7110_PD_ISP 5 > +#define JH7110_PD_VENC 6 > + > +#endif Best regards, Krzysztof
WARNING: multiple messages have this Message-ID (diff)
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> To: Walker Chen <walker.chen@starfivetech.com>, linux-riscv@lists.infradead.org, linux-pm@vger.kernel.org, devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor.dooley@microchip.com>, Emil Renner Berthing <emil.renner.berthing@canonical.com>, "Rafael J . Wysocki" <rafael@kernel.org>, linux-kernel@vger.kernel.org Subject: Re: [RESEND PATCH v2 1/3] dt-bindings: power: Add starfive,jh71xx-pmu Date: Thu, 8 Dec 2022 10:03:33 +0100 [thread overview] Message-ID: <ac374e10-fb5b-c56c-7c76-b131446533fe@linaro.org> (raw) In-Reply-To: <20221208084523.9733-2-walker.chen@starfivetech.com> On 08/12/2022 09:45, Walker Chen wrote: > Add bindings for Power Management Unit (PMU) on the StarFive JH71XX SoC. > > Signed-off-by: Walker Chen <walker.chen@starfivetech.com> > + }; > diff --git a/include/dt-bindings/power/starfive,jh7110-pmu.h b/include/dt-bindings/power/starfive,jh7110-pmu.h > new file mode 100644 > index 000000000000..73c6a79a2181 > --- /dev/null > +++ b/include/dt-bindings/power/starfive,jh7110-pmu.h > @@ -0,0 +1,17 @@ > +/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */ Why different license than the bindings? MIT is pretty compatible, but if it does not matter for you, keep same licenses as bindings. > +/* > + * Copyright (C) 2022 StarFive Technology Co., Ltd. > + * Author: Walker Chen <walker.chen@starfivetech.com> > + */ > +#ifndef __DT_BINDINGS_POWER_JH7110_POWER_H__ > +#define __DT_BINDINGS_POWER_JH7110_POWER_H__ > + > +#define JH7110_PD_SYSTOP 0 > +#define JH7110_PD_CPU 1 > +#define JH7110_PD_GPUA 2 > +#define JH7110_PD_VDEC 3 > +#define JH7110_PD_VOUT 4 > +#define JH7110_PD_ISP 5 > +#define JH7110_PD_VENC 6 > + > +#endif Best regards, Krzysztof _______________________________________________ linux-riscv mailing list linux-riscv@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-riscv
next prev parent reply other threads:[~2022-12-08 9:05 UTC|newest] Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-12-08 8:45 [RESEND PATCH v2 0/3] JH7110 PMU Support Walker Chen 2022-12-08 8:45 ` Walker Chen 2022-12-08 8:45 ` [RESEND PATCH v2 1/3] dt-bindings: power: Add starfive,jh71xx-pmu Walker Chen 2022-12-08 8:45 ` Walker Chen 2022-12-08 8:59 ` Krzysztof Kozlowski 2022-12-08 8:59 ` Krzysztof Kozlowski 2022-12-12 2:46 ` Walker Chen 2022-12-12 2:46 ` Walker Chen 2022-12-08 9:03 ` Krzysztof Kozlowski [this message] 2022-12-08 9:03 ` Krzysztof Kozlowski 2022-12-12 3:19 ` Walker Chen 2022-12-12 3:19 ` Walker Chen 2022-12-08 13:31 ` Rob Herring 2022-12-08 13:31 ` Rob Herring 2022-12-12 6:33 ` Walker Chen 2022-12-12 6:33 ` Walker Chen 2022-12-08 8:45 ` [RESEND PATCH v2 2/3] soc: starfive: Add StarFive JH71XX pmu driver Walker Chen 2022-12-08 8:45 ` Walker Chen 2022-12-19 20:40 ` Conor Dooley 2022-12-19 20:40 ` Conor Dooley 2022-12-28 2:08 ` Walker Chen 2022-12-28 2:08 ` Walker Chen 2022-12-28 19:50 ` Conor Dooley 2022-12-28 19:50 ` Conor Dooley 2023-01-09 6:32 ` Walker Chen 2023-01-09 6:32 ` Walker Chen 2022-12-08 8:45 ` [RESEND PATCH v2 3/3] riscv: dts: starfive: add pmu controller node Walker Chen 2022-12-08 8:45 ` Walker Chen
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=ac374e10-fb5b-c56c-7c76-b131446533fe@linaro.org \ --to=krzysztof.kozlowski@linaro.org \ --cc=conor.dooley@microchip.com \ --cc=devicetree@vger.kernel.org \ --cc=emil.renner.berthing@canonical.com \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-pm@vger.kernel.org \ --cc=linux-riscv@lists.infradead.org \ --cc=rafael@kernel.org \ --cc=robh+dt@kernel.org \ --cc=walker.chen@starfivetech.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.