Re: [PATCH net-next 2/2] net: stmmac: platform: add support for phy-supply

From: Andrew Lunn <andrew@lunn.ch>
To: Marco Felsch <m.felsch@pengutronix.de>
Cc: davem@davemloft.net, edumazet@google.com, kuba@kernel.org,
	pabeni@redhat.com, robh+dt@kernel.org,
	krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org,
	peppe.cavallaro@st.com, alexandre.torgue@foss.st.com,
	joabreu@synopsys.com, mcoquelin.stm32@gmail.com,
	netdev@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-stm32@st-md-mailman.stormreply.com,
	linux-arm-kernel@lists.infradead.org, kernel@pengutronix.de
Subject: Re: [PATCH net-next 2/2] net: stmmac: platform: add support for phy-supply
Date: Tue, 18 Jul 2023 00:30:19 +0200	[thread overview]
Message-ID: <accc8d89-7565-460e-a874-a491b755bbb8@lunn.ch> (raw)
In-Reply-To: <20230717164307.2868264-2-m.felsch@pengutronix.de>

On Mon, Jul 17, 2023 at 06:43:07PM +0200, Marco Felsch wrote:
> Add generic phy-supply handling support to control the phy regulator.
> Use the common stmmac_platform code path so all drivers using
> stmmac_probe_config_dt() and stmmac_pltfr_pm_ops can use it.
> 
> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
> ---
>  .../ethernet/stmicro/stmmac/stmmac_platform.c | 51 +++++++++++++++++++
>  include/linux/stmmac.h                        |  1 +
>  2 files changed, 52 insertions(+)
> 
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> index eb0b2898daa3d..6193d42b53fb7 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> @@ -10,6 +10,7 @@
>  
>  #include <linux/platform_device.h>
>  #include <linux/pm_runtime.h>
> +#include <linux/regulator/consumer.h>
>  #include <linux/module.h>
>  #include <linux/io.h>
>  #include <linux/of.h>
> @@ -423,6 +424,15 @@ stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac)
>  	if (plat->interface < 0)
>  		plat->interface = plat->phy_interface;
>  
> +	/* Optional regulator for PHY */
> +	plat->phy_regulator = devm_regulator_get_optional(&pdev->dev, "phy");
> +	if (IS_ERR(plat->phy_regulator)) {
> +		if (PTR_ERR(plat->phy_regulator) == -EPROBE_DEFER)
> +			return ERR_CAST(plat->phy_regulator);
> +		dev_info(&pdev->dev, "No regulator found\n");
> +		plat->phy_regulator = NULL;
> +	}
> +

So this gets the regulator. When do you actually turn it on?

     Andrew