[U-Boot] [PATCH v3 0/12] Introduce Samsung's new board Trats2

[U-Boot] [PATCH v3 0/12] Introduce Samsung's new board Trats2

[Piotr Wilczek]

This patchset add support for a new Samsung board Trats2.
The board use now new i2c framework.
Support for new multi function pmic max77693 is added.

This patchset depends on:
    commit: 8faefadb7305b95d02df38bd2ea61429d59483e5
    Author: Marc Dietrich <marvin24@gmx.de>  2013-03-29 08:57:10
    disk: fix unaligned access in efi partitions

Changes in v3:
- I2C_GET_BUS replaced by i2c_get_bus_num() function
- use i2c_set_bus_num() instead I2C_SET_BUS maro
That macro should be completly replaced when all i2c drivers
 are adapted to new i2c framework
- add Maintainer entry
- changed T-flash detect pin to GPX3[3]
- removed MMC_ASYNC
- swiched to new i2c framework, use hardware and soft i2c
- adapted s3c24x0 i2c driver to new i2c framework

Changes in v2:
- changed printf to debug
- removed lcd callback in panel_info
- changed i2c from hardware to software
- use max77693 multifunction pmic

Piotr Wilczek (12):
  pmic:max77686: add function to set voltage and mode
  drivers:power:max77693: add support for new multi function pmic
    max77693
  arm:exynos:gpio: fix s5p_gpio_part_max for exynos4x12
  i2c:multi_i2c: adapt file to new i2c framework
  power: fix pmic command
  drivers:power:power_i2c: adapt file to new i2c framework
  driver:i2c:s3c24x0: adapt driver to new i2c framework
  drivers:video:s6e8ax0: change data_to_send array to static
  drivers:lcd: fix unaligned access on lcd
  samsung: trats2: add support for new board Trats2
  board:VCMA9 switch to ne i2c framework
  board:smdk5250: switch to new i2c framework

 MAINTAINERS                             |    4 +
 Makefile                                |    1 +
 arch/arm/include/asm/arch-exynos/gpio.h |   17 +-
 board/samsung/common/multi_i2c.c        |   37 ++-
 board/samsung/smdk5250/smdk5250.c       |    2 +-
 board/samsung/trats2/Makefile           |   50 +++
 board/samsung/trats2/trats2.c           |  533 +++++++++++++++++++++++++++++++
 boards.cfg                              |    1 +
 common/lcd.c                            |   12 +-
 drivers/i2c/Makefile                    |    2 +-
 drivers/i2c/s3c24x0_i2c.c               |  100 +++---
 drivers/power/battery/Makefile          |    1 +
 drivers/power/battery/bat_trats2.c      |   81 +++++
 drivers/power/mfd/Makefile              |   49 +++
 drivers/power/mfd/fg_max77693.c         |  143 +++++++++
 drivers/power/mfd/muic_max77693.c       |   91 ++++++
 drivers/power/mfd/pmic_max77693.c       |  110 +++++++
 drivers/power/pmic/pmic_max77686.c      |  186 +++++++++++
 drivers/power/power_core.c              |    8 +
 drivers/power/power_i2c.c               |    6 +
 drivers/video/s6e8ax0.c                 |   26 +-
 include/configs/VCMA9.h                 |    9 +-
 include/configs/exynos5250-dt.h         |    8 +-
 include/configs/trats2.h                |  326 +++++++++++++++++++
 include/power/max77686_pmic.h           |   11 +
 include/power/max77693_fg.h             |   65 ++++
 include/power/max77693_muic.h           |   90 ++++++
 include/power/max77693_pmic.h           |   56 ++++
 28 files changed, 1949 insertions(+), 76 deletions(-)
 create mode 100644 board/samsung/trats2/Makefile
 create mode 100644 board/samsung/trats2/trats2.c
 create mode 100644 drivers/power/battery/bat_trats2.c
 create mode 100644 drivers/power/mfd/Makefile
 create mode 100644 drivers/power/mfd/fg_max77693.c
 create mode 100644 drivers/power/mfd/muic_max77693.c
 create mode 100644 drivers/power/mfd/pmic_max77693.c
 create mode 100644 include/configs/trats2.h
 create mode 100644 include/power/max77693_fg.h
 create mode 100644 include/power/max77693_muic.h
 create mode 100644 include/power/max77693_pmic.h

-- 
1.7.9.5

[U-Boot] [PATCH v3 01/12] pmic:max77686: add function to set voltage and mode

[Piotr Wilczek]

This patch add new functions to pmic max77686 to set voltage and mode.

Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
CC: Minkyu Kang <mk7.kang@samsung.com>
CC: Rajeshwari Shinde <rajeshwari.s@samsung.com>

Acked-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
---
Changes in v3: None
Changes in v2:
- changed printf to debug

 drivers/power/pmic/pmic_max77686.c |  186 ++++++++++++++++++++++++++++++++++++
 include/power/max77686_pmic.h      |   11 +++
 2 files changed, 197 insertions(+)

diff --git a/drivers/power/pmic/pmic_max77686.c b/drivers/power/pmic/pmic_max77686.c
index 7fcb4c0..dabd6b6 100644
--- a/drivers/power/pmic/pmic_max77686.c
+++ b/drivers/power/pmic/pmic_max77686.c
@@ -30,6 +30,192 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+static const char max77686_buck_addr[] = {
+	0xff, 0x10, 0x12, 0x1c, 0x26, 0x30, 0x32, 0x34, 0x36, 0x38
+};
+
+static unsigned int max77686_ldo_volt2hex(int ldo, ulong uV)
+{
+	unsigned int hex = 0;
+	const unsigned int max_hex = 0x3f;
+
+	switch (ldo) {
+	case 1:
+	case 2:
+	case 6:
+	case 7:
+	case 8:
+	case 15:
+		hex = (uV - 800000) / 25000;
+		break;
+	default:
+		hex = (uV - 800000) / 50000;
+	}
+
+	if (0 <= hex && hex <= max_hex)
+		return hex;
+
+	debug("%s: %ld is wrong voltage value for LDO%d\n", __func__, uV, ldo);
+	return 0;
+}
+
+int max77686_set_ldo_voltage(struct pmic *p, int ldo, ulong uV)
+{
+	unsigned int val, ret, hex, adr, mask;
+
+	if (ldo < 1 && 26 < ldo) {
+		printf("%s: %d is wrong ldo number\n", __func__, ldo);
+		return -1;
+	}
+
+	adr = MAX77686_REG_PMIC_LDO1CTRL1 + ldo - 1;
+	mask = 0x3f;
+	hex = max77686_ldo_volt2hex(ldo, uV);
+
+	if (!hex)
+		return -1;
+
+	ret = pmic_reg_read(p, adr, &val);
+	val &= ~mask;
+	val |= hex;
+	ret |= pmic_reg_write(p, adr, val);
+
+	return ret;
+}
+
+int max77686_set_ldo_mode(struct pmic *p, int ldo, char opmode)
+{
+	unsigned int val, ret, mask, adr, mode;
+
+	if (ldo < 1 && 26 < ldo) {
+		printf("%s: %d is wrong ldo number\n", __func__, ldo);
+		return -1;
+	}
+
+	adr = MAX77686_REG_PMIC_LDO1CTRL1 + ldo - 1;
+
+	/* mask */
+	mask = 0xc0;
+
+	/* mode */
+	if (opmode == OPMODE_OFF) {
+		mode = 0x00;
+	} else if (opmode == OPMODE_STANDBY) {
+		switch (ldo) {
+		case 2:
+		case 6:
+		case 7:
+		case 8:
+		case 10:
+		case 11:
+		case 12:
+		case 14:
+		case 15:
+		case 16:
+			mode = 0x40;
+			break;
+		default:
+			mode = 0xff;
+		}
+	} else if (opmode == OPMODE_LPM) {
+		mode = 0x80;
+	} else if (opmode == OPMODE_ON) {
+		mode = 0xc0;
+	} else {
+		mode = 0xff;
+	}
+
+	if (mode == 0xff) {
+		printf("%s: %d is not supported on LDO%d\n",
+		       __func__, opmode, ldo);
+		return -1;
+	}
+
+	ret = pmic_reg_read(p, adr, &val);
+	val &= ~mask;
+	val |= mode;
+	ret |= pmic_reg_write(p, adr, val);
+
+	return ret;
+}
+
+int max77686_set_buck_mode(struct pmic *p, int buck, char opmode)
+{
+	unsigned int val, ret, mask, adr, size, mode;
+
+	size = sizeof(max77686_buck_addr) / sizeof(*max77686_buck_addr);
+	if (buck >= size) {
+		printf("%s: %d is wrong buck number\n", __func__, buck);
+		return -1;
+	}
+
+	adr = max77686_buck_addr[buck];
+
+	/* mask */
+	switch (buck) {
+	case 2:
+	case 3:
+	case 4:
+		mask = 0x30;
+		break;
+	default:
+		mask = 0x03;
+	}
+
+	/* mode */
+	if (opmode == OPMODE_OFF) {
+		mode = 0x00;
+	} else if (opmode == OPMODE_STANDBY) {
+		switch (buck) {
+		case 1:
+			mode = 0x01;
+			break;
+		case 2:
+		case 3:
+		case 4:
+			mode = 0x10;
+			break;
+		default:
+			mode = 0xff;
+		}
+	} else if (opmode == OPMODE_LPM) {
+		switch (buck) {
+		case 2:
+		case 3:
+		case 4:
+			mode = 0x20;
+			break;
+		default:
+			mode = 0xff;
+		}
+	} else if (opmode == OPMODE_ON) {
+		switch (buck) {
+		case 2:
+		case 3:
+		case 4:
+			mode = 0x30;
+			break;
+		default:
+			mode = 0x03;
+		}
+	} else {
+		mode = 0xff;
+	}
+
+	if (mode == 0xff) {
+		printf("%s: %d is not supported on BUCK%d\n",
+		       __func__, opmode, buck);
+		return -1;
+	}
+
+	ret = pmic_reg_read(p, adr, &val);
+	val &= ~mask;
+	val |= mode;
+	ret |= pmic_reg_write(p, adr, val);
+
+	return ret;
+}
+
 int pmic_init(unsigned char bus)
 {
 	static const char name[] = "MAX77686_PMIC";
diff --git a/include/power/max77686_pmic.h b/include/power/max77686_pmic.h
index fdc7ca9..ce58c02 100644
--- a/include/power/max77686_pmic.h
+++ b/include/power/max77686_pmic.h
@@ -155,6 +155,17 @@ enum {
 	EN_LDO = (0x3 << 6),
 };
 
+enum {
+	OPMODE_OFF = 0,
+	OPMODE_STANDBY,
+	OPMODE_LPM,
+	OPMODE_ON,
+};
+
+int max77686_set_ldo_voltage(struct pmic *p, int ldo, ulong uV);
+int max77686_set_ldo_mode(struct pmic *p, int ldo, char opmode);
+int max77686_set_buck_mode(struct pmic *p, int buck, char opmode);
+
 /* Buck1 1 volt value */
 #define MAX77686_BUCK1OUT_1V	0x5
 #define MAX77686_BUCK1CTRL_EN	(3 << 0)
-- 
1.7.9.5

[U-Boot] [PATCH v3 02/12] drivers:power:max77693: add support for new multi function pmic max77693

[Piotr Wilczek]

This patch add support for new multi function pmic max77693.
The driver is split into three modules: pmic, muic and fuelgage.

Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
CC: Lukasz Majewski <l.majewski@samsung.com>

---
Changes in v3: None
Changes in v2:
- new patch

 Makefile                           |    1 +
 drivers/power/battery/Makefile     |    1 +
 drivers/power/battery/bat_trats2.c |   81 ++++++++++++++++++++
 drivers/power/mfd/Makefile         |   49 ++++++++++++
 drivers/power/mfd/fg_max77693.c    |  143 ++++++++++++++++++++++++++++++++++++
 drivers/power/mfd/muic_max77693.c  |   91 +++++++++++++++++++++++
 drivers/power/mfd/pmic_max77693.c  |  110 +++++++++++++++++++++++++++
 include/power/max77693_fg.h        |   65 ++++++++++++++++
 include/power/max77693_muic.h      |   90 +++++++++++++++++++++++
 include/power/max77693_pmic.h      |   56 ++++++++++++++
 10 files changed, 687 insertions(+)
 create mode 100644 drivers/power/battery/bat_trats2.c
 create mode 100644 drivers/power/mfd/Makefile
 create mode 100644 drivers/power/mfd/fg_max77693.c
 create mode 100644 drivers/power/mfd/muic_max77693.c
 create mode 100644 drivers/power/mfd/pmic_max77693.c
 create mode 100644 include/power/max77693_fg.h
 create mode 100644 include/power/max77693_muic.h
 create mode 100644 include/power/max77693_pmic.h

diff --git a/Makefile b/Makefile
index 84b0c43..62c90d2 100644
--- a/Makefile
+++ b/Makefile
@@ -288,6 +288,7 @@ LIBS-y += drivers/pci/libpci.o
 LIBS-y += drivers/pcmcia/libpcmcia.o
 LIBS-y += drivers/power/libpower.o \
 	drivers/power/fuel_gauge/libfuel_gauge.o \
+	drivers/power/mfd/libmfd.o \
 	drivers/power/pmic/libpmic.o \
 	drivers/power/battery/libbattery.o
 LIBS-y += drivers/spi/libspi.o
diff --git a/drivers/power/battery/Makefile b/drivers/power/battery/Makefile
index b176701..eeeaa27 100644
--- a/drivers/power/battery/Makefile
+++ b/drivers/power/battery/Makefile
@@ -26,6 +26,7 @@ include $(TOPDIR)/config.mk
 LIB	:= $(obj)libbattery.o
 
 COBJS-$(CONFIG_POWER_BATTERY_TRATS) += bat_trats.o
+COBJS-$(CONFIG_POWER_BATTERY_TRATS2) += bat_trats2.o
 
 COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
diff --git a/drivers/power/battery/bat_trats2.c b/drivers/power/battery/bat_trats2.c
new file mode 100644
index 0000000..c1be64d
--- /dev/null
+++ b/drivers/power/battery/bat_trats2.c
@@ -0,0 +1,81 @@
+/*
+ *  Copyright (C) 2013 Samsung Electronics
+ *  Piotr Wilczek <p.wilczek@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <power/pmic.h>
+#include <power/battery.h>
+#include <power/max8997_pmic.h>
+#include <errno.h>
+
+static struct battery battery_trats;
+
+static int power_battery_charge(struct pmic *bat)
+{
+	struct power_battery *p_bat = bat->pbat;
+
+	if (bat->chrg->chrg_state(p_bat->chrg, CHARGER_ENABLE, 450))
+		return -1;
+
+	return 0;
+}
+
+static int power_battery_init_trats2(struct pmic *bat_,
+				    struct pmic *fg_,
+				    struct pmic *chrg_,
+				    struct pmic *muic_)
+{
+	bat_->pbat->fg = fg_;
+	bat_->pbat->chrg = chrg_;
+	bat_->pbat->muic = muic_;
+
+	bat_->fg = fg_->fg;
+	bat_->chrg = chrg_->chrg;
+	bat_->chrg->chrg_type = muic_->chrg->chrg_type;
+	return 0;
+}
+
+static struct power_battery power_bat_trats2 = {
+	.bat = &battery_trats,
+	.battery_init = power_battery_init_trats2,
+	.battery_charge = power_battery_charge,
+};
+
+int power_bat_init(unsigned char bus)
+{
+	static const char name[] = "BAT_TRATS2";
+	struct pmic *p = pmic_alloc();
+
+	if (!p) {
+		printf("%s: POWER allocation error!\n", __func__);
+		return -ENOMEM;
+	}
+
+	debug("Board BAT init\n");
+
+	p->interface = PMIC_NONE;
+	p->name = name;
+	p->bus = bus;
+
+	p->pbat = &power_bat_trats2;
+	return 0;
+}
diff --git a/drivers/power/mfd/Makefile b/drivers/power/mfd/Makefile
new file mode 100644
index 0000000..2ab3b00
--- /dev/null
+++ b/drivers/power/mfd/Makefile
@@ -0,0 +1,49 @@
+#
+# Copyright (C) 2013 Samsung Electronics
+# Piotr Wilczek <p.wilczek@samsung.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	:= $(obj)libmfd.o
+
+COBJS-$(CONFIG_POWER_PMIC_MAX77693) += pmic_max77693.o
+COBJS-$(CONFIG_POWER_MUIC_MAX77693) += muic_max77693.o
+COBJS-$(CONFIG_POWER_FG_MAX77693) += fg_max77693.o
+
+COBJS	:= $(COBJS-y)
+SRCS	:= $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+
+all:	$(LIB)
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+########################################################################
diff --git a/drivers/power/mfd/fg_max77693.c b/drivers/power/mfd/fg_max77693.c
new file mode 100644
index 0000000..0004cf8
--- /dev/null
+++ b/drivers/power/mfd/fg_max77693.c
@@ -0,0 +1,143 @@
+/*
+ *  Copyright (C) 2013 Samsung Electronics
+ *  Piotr Wilczek <p.wilczek@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <power/pmic.h>
+#include <power/max77693_fg.h>
+#include <i2c.h>
+#include <power/power_chrg.h>
+#include <power/battery.h>
+#include <power/fg_battery_cell_params.h>
+#include <errno.h>
+
+static int max77693_get_vcell(u32 *vcell)
+{
+	u16 value;
+	u8 ret;
+
+	ret = i2c_read(MAX77693_FUEL_I2C_ADDR, MAX77693_VCELL, 1,
+		       (u8 *)&value, 2);
+	if (ret)
+		return -1;
+
+	*vcell = (u32)(value >> 3);
+	*vcell = *vcell * 625;
+
+	return 0;
+}
+
+static int max77693_get_soc(u32 *soc)
+{
+	u16 value;
+	u8 ret;
+
+	ret = i2c_read(MAX77693_FUEL_I2C_ADDR, MAX77693_VFSOC, 1,
+		       (u8 *)&value, 2);
+	if (ret)
+		return -1;
+
+	*soc = (u32)(value >> 8);
+
+	return 0;
+}
+
+static int power_update_battery(struct pmic *p, struct pmic *bat)
+{
+	struct power_battery *pb = bat->pbat;
+	int ret = 0;
+
+	if (pmic_probe(p)) {
+		puts("Can't find max17042 fuel gauge\n");
+		return -1;
+	}
+
+	max77693_get_soc(&pb->bat->state_of_chrg);
+	max77693_get_vcell(&pb->bat->voltage_uV);
+
+	return ret;
+}
+
+static int power_check_battery(struct pmic *p, struct pmic *bat)
+{
+	struct power_battery *pb = bat->pbat;
+	unsigned int val;
+	int ret = 0;
+
+	if (pmic_probe(p)) {
+		puts("Can't find max17042 fuel gauge\n");
+		return -1;
+	}
+
+	ret |= pmic_reg_read(p, MAX77693_STATUS, &val);
+	debug("fg status: 0x%x\n", val);
+
+	ret |= pmic_reg_read(p, MAX77693_VERSION, &pb->bat->version);
+
+	power_update_battery(p, bat);
+	debug("fg ver: 0x%x\n", pb->bat->version);
+	printf("BAT: state_of_charge(SOC):%d%%\n",
+	       pb->bat->state_of_chrg);
+
+	printf("     voltage: %d.%6.6d [V] (expected to be %d [mAh])\n",
+	       pb->bat->voltage_uV / 1000000,
+	       pb->bat->voltage_uV % 1000000,
+	       pb->bat->capacity);
+
+	if (pb->bat->voltage_uV > 3850000)
+		pb->bat->state = EXT_SOURCE;
+	else if (pb->bat->voltage_uV < 3600000 || pb->bat->state_of_chrg < 5)
+		pb->bat->state = CHARGE;
+	else
+		pb->bat->state = NORMAL;
+
+	return ret;
+}
+
+static struct power_fg power_fg_ops = {
+	.fg_battery_check = power_check_battery,
+	.fg_battery_update = power_update_battery,
+};
+
+int power_fg_init(unsigned char bus)
+{
+	static const char name[] = "MAX77693_FG";
+	struct pmic *p = pmic_alloc();
+
+	if (!p) {
+		printf("%s: POWER allocation error!\n", __func__);
+		return -ENOMEM;
+	}
+
+	debug("Board Fuel Gauge init\n");
+
+	p->name = name;
+	p->interface = PMIC_I2C;
+	p->number_of_regs = FG_NUM_OF_REGS;
+	p->hw.i2c.addr = MAX77693_FUEL_I2C_ADDR;
+	p->hw.i2c.tx_num = 2;
+	p->sensor_byte_order = PMIC_SENSOR_BYTE_ORDER_BIG;
+	p->bus = bus;
+
+	p->fg = &power_fg_ops;
+	return 0;
+}
diff --git a/drivers/power/mfd/muic_max77693.c b/drivers/power/mfd/muic_max77693.c
new file mode 100644
index 0000000..eaa9120
--- /dev/null
+++ b/drivers/power/mfd/muic_max77693.c
@@ -0,0 +1,91 @@
+/*
+ *  Copyright (C) 2013 Samsung Electronics
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <power/pmic.h>
+#include <power/power_chrg.h>
+#include <power/max77693_muic.h>
+#include <i2c.h>
+#include <errno.h>
+
+static int power_chrg_get_type(struct pmic *p)
+{
+	unsigned int val;
+	unsigned int charge_type, charger;
+
+	/* if probe failed, return cable none */
+	if (pmic_probe(p))
+		return CHARGER_NO;
+
+	pmic_reg_read(p, MAX77693_MUIC_STATUS2, &val);
+
+	charge_type = val & MAX77693_MUIC_CHG_MASK;
+
+	switch (charge_type) {
+	case MAX77693_MUIC_CHG_NO:
+		charger = CHARGER_NO;
+		break;
+	case MAX77693_MUIC_CHG_USB:
+	case MAX77693_MUIC_CHG_USB_D:
+		charger = CHARGER_USB;
+		break;
+	case MAX77693_MUIC_CHG_TA:
+	case MAX77693_MUIC_CHG_TA_1A:
+		charger = CHARGER_TA;
+		break;
+	case MAX77693_MUIC_CHG_TA_500:
+		charger = CHARGER_TA_500;
+		break;
+	default:
+		charger = CHARGER_UNKNOWN;
+		break;
+	}
+
+	return charger;
+}
+
+static struct power_chrg power_chrg_muic_ops = {
+	.chrg_type = power_chrg_get_type,
+};
+
+int power_muic_init(unsigned int bus)
+{
+	static const char name[] = "MAX77693_MUIC";
+	struct pmic *p = pmic_alloc();
+
+	if (!p) {
+		printf("%s: POWER allocation error!\n", __func__);
+		return -ENOMEM;
+	}
+
+	debug("Board Micro USB Interface Controller init\n");
+
+	p->name = name;
+	p->interface = PMIC_I2C;
+	p->number_of_regs = MUIC_NUM_OF_REGS;
+	p->hw.i2c.addr = MAX77693_MUIC_I2C_ADDR;
+	p->hw.i2c.tx_num = 1;
+	p->bus = bus;
+
+	p->chrg = &power_chrg_muic_ops;
+	return 0;
+}
diff --git a/drivers/power/mfd/pmic_max77693.c b/drivers/power/mfd/pmic_max77693.c
new file mode 100644
index 0000000..037fcce
--- /dev/null
+++ b/drivers/power/mfd/pmic_max77693.c
@@ -0,0 +1,110 @@
+/*
+ *  Copyright (C) 2013 Samsung Electronics
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <power/pmic.h>
+#include <power/max77693_pmic.h>
+#include <i2c.h>
+#include <errno.h>
+
+static int max77693_charger_state(struct pmic *p, int state, int current)
+{
+	unsigned int val;
+
+	if (pmic_probe(p))
+		return -1;
+
+	/* unlock write capability */
+	val = MAX77693_CHG_UNLOCK;
+	pmic_reg_write(p, MAX77693_CHG_CNFG_06, val);
+
+	if (state == CHARGER_DISABLE) {
+		puts("Disable the charger.\n");
+		pmic_reg_read(p, MAX77693_CHG_CNFG_00, &val);
+		val &= ~0x01;
+		pmic_reg_write(p, MAX77693_CHG_CNFG_00, val);
+		return -1;
+	}
+
+	if (current < CHARGER_MIN_CURRENT || current > CHARGER_MAX_CURRENT) {
+		printf("%s: Wrong charge current: %d [mA]\n",
+		       __func__, current);
+		return -1;
+	}
+
+	/* set charging current */
+	pmic_reg_read(p, MAX77693_CHG_CNFG_02, &val);
+	val &= ~MAX77693_CHG_CC;
+	val |= current * 10 / 333;	/* 0.1A/3 steps */
+	pmic_reg_write(p, MAX77693_CHG_CNFG_02, val);
+
+	/* enable charging */
+	val = MAX77693_CHG_MODE_ON;
+	pmic_reg_write(p, MAX77693_CHG_CNFG_00, val);
+
+	/* check charging current */
+	pmic_reg_read(p, MAX77693_CHG_CNFG_02, &val);
+	val &= 0x3f;
+	printf("Enable the charger @ %d [mA]\n", val * 333 / 10);
+
+	return 0;
+}
+
+static int max77693_charger_bat_present(struct pmic *p)
+{
+	unsigned int val;
+
+	if (pmic_probe(p))
+		return -1;
+
+	pmic_reg_read(p, MAX77693_CHG_INT_OK, &val);
+
+	return !(val & MAX77693_CHG_DETBAT);
+}
+
+static struct power_chrg power_chrg_pmic_ops = {
+	.chrg_bat_present = max77693_charger_bat_present,
+	.chrg_state = max77693_charger_state,
+};
+
+int pmic_init_max77693(unsigned char bus)
+{
+	static const char name[] = "MAX77693_PMIC";
+	struct pmic *p = pmic_alloc();
+
+	if (!p) {
+		printf("%s: POWER allocation error!\n", __func__);
+		return -ENOMEM;
+	}
+
+	debug("Board PMIC init\n");
+
+	p->name = name;
+	p->interface = PMIC_I2C;
+	p->number_of_regs = PMIC_NUM_OF_REGS;
+	p->hw.i2c.addr = MAX77693_PMIC_I2C_ADDR;
+	p->hw.i2c.tx_num = 1;
+	p->bus = bus;
+
+	p->chrg = &power_chrg_pmic_ops;
+	return 0;
+}
diff --git a/include/power/max77693_fg.h b/include/power/max77693_fg.h
new file mode 100644
index 0000000..d129187
--- /dev/null
+++ b/include/power/max77693_fg.h
@@ -0,0 +1,65 @@
+/*
+ *  Copyright (C) 2013 Samsung Electronics
+ *  Piotr Wilczek <p.wilczek@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __MAX77693_FG_H_
+#define __MAX77693_FG_H_
+
+/* MAX 77693 registers */
+enum {
+	MAX77693_STATUS         = 0x00,
+	MAX77693_SOCREP         = 0x06,
+	MAX77693_VCELL          = 0x09,
+	MAX77693_CURRENT        = 0x0A,
+	MAX77693_AVG_CURRENT	= 0x0B,
+	MAX77693_SOCMIX		= 0x0D,
+	MAX77693_SOCAV		= 0x0E,
+	MAX77693_DESIGN_CAP	= 0x18,
+	MAX77693_AVG_VCELL	= 0x19,
+	MAX77693_CONFIG	= 0x1D,
+	MAX77693_VERSION	= 0x21,
+	MAX77693_LEARNCFG       = 0x28,
+	MAX77693_FILTERCFG	= 0x29,
+	MAX77693_RELAXCFG	= 0x2A,
+	MAX77693_MISCCFG	= 0x2B,
+	MAX77693_CGAIN		= 0x2E,
+	MAX77693_COFF		= 0x2F,
+	MAX77693_RCOMP0	= 0x38,
+	MAX77693_TEMPCO	= 0x39,
+	MAX77693_FSTAT		= 0x3D,
+	MAX77693_VFOCV		= 0xEE,
+	MAX77693_VFSOC		= 0xFF,
+
+	FG_NUM_OF_REGS = 0x100,
+};
+
+#define MAX77693_POR (1 << 1)
+
+#define MODEL_UNLOCK1		0x0059
+#define MODEL_UNLOCK2		0x00c4
+#define MODEL_LOCK1		0x0000
+#define MODEL_LOCK2		0x0000
+
+#define MAX77693_FUEL_I2C_ADDR	(0x6C >> 1)
+
+int power_fg_init(unsigned char bus);
+#endif /* __MAX77693_FG_H_ */
diff --git a/include/power/max77693_muic.h b/include/power/max77693_muic.h
new file mode 100644
index 0000000..076fdc0
--- /dev/null
+++ b/include/power/max77693_muic.h
@@ -0,0 +1,90 @@
+/*
+ *  Copyright (C) 2013 Samsung Electronics
+ *  Piotr Wilczek <p.wilczek@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __MAX77693_MUIC_H_
+#define __MAX77693_MUIC_H_
+
+#include <power/power_chrg.h>
+
+/*
+ * MUIC REGISTER
+ */
+
+#define MAX77693_MUIC_PREFIX	"max77693-muic:"
+
+/* MAX77693_MUIC_STATUS1 */
+#define MAX77693_MUIC_ADC_MASK	0x1F
+
+/* MAX77693_MUIC_STATUS2 */
+#define MAX77693_MUIC_CHG_NO		0x00
+#define MAX77693_MUIC_CHG_USB		0x01
+#define MAX77693_MUIC_CHG_USB_D		0x02
+#define MAX77693_MUIC_CHG_TA		0x03
+#define MAX77693_MUIC_CHG_TA_500	0x04
+#define MAX77693_MUIC_CHG_TA_1A		0x05
+#define MAX77693_MUIC_CHG_MASK		0x07
+
+/* MAX77693_MUIC_CONTROL1 */
+#define MAX77693_MUIC_CTRL1_DN1DP2	((0x1 << 3) | 0x1)
+#define MAX77693_MUIC_CTRL1_UT1UR2	((0x3 << 3) | 0x3)
+#define MAX77693_MUIC_CTRL1_ADN1ADP2	((0x4 << 3) | 0x4)
+#define MAX77693_MUIC_CTRL1_AUT1AUR2	((0x5 << 3) | 0x5)
+#define MAX77693_MUIC_CTRL1_MASK	0xC0
+
+#define MUIC_PATH_USB	0
+#define MUIC_PATH_UART	1
+
+#define MUIC_PATH_CP	0
+#define MUIC_PATH_AP	1
+
+enum muic_path {
+	MUIC_PATH_USB_CP,
+	MUIC_PATH_USB_AP,
+	MUIC_PATH_UART_CP,
+	MUIC_PATH_UART_AP,
+};
+
+/* MAX 777693 MUIC registers */
+enum {
+	MAX77693_MUIC_ID	= 0x00,
+	MAX77693_MUIC_INT1	= 0x01,
+	MAX77693_MUIC_INT2	= 0x02,
+	MAX77693_MUIC_INT3	= 0x03,
+	MAX77693_MUIC_STATUS1	= 0x04,
+	MAX77693_MUIC_STATUS2	= 0x05,
+	MAX77693_MUIC_STATUS3	= 0x06,
+	MAX77693_MUIC_INTMASK1	= 0x07,
+	MAX77693_MUIC_INTMASK2	= 0x08,
+	MAX77693_MUIC_INTMASK3	= 0x09,
+	MAX77693_MUIC_CDETCTRL	= 0x0A,
+	MAX77693_MUIC_CONTROL1	= 0x0C,
+	MAX77693_MUIC_CONTROL2	= 0x0D,
+	MAX77693_MUIC_CONTROL3	= 0x0E,
+
+	MUIC_NUM_OF_REGS = 0x0F,
+};
+
+#define MAX77693_MUIC_I2C_ADDR	(0x4A >> 1)
+
+int power_muic_init(unsigned int bus);
+#endif /* __MAX77693_MUIC_H_ */
diff --git a/include/power/max77693_pmic.h b/include/power/max77693_pmic.h
new file mode 100644
index 0000000..07c3dd6
--- /dev/null
+++ b/include/power/max77693_pmic.h
@@ -0,0 +1,56 @@
+/*
+ *  Copyright (C) 2013 Samsung Electronics
+ *  Piotr Wilczek <p.wilczek@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __MAX77693_PMIC_H_
+#define __MAX77693_PMIC_H_
+
+#include <power/power_chrg.h>
+
+enum {CHARGER_ENABLE, CHARGER_DISABLE};
+
+#define CHARGER_MIN_CURRENT 200
+#define CHARGER_MAX_CURRENT 2000
+
+#define MAX77693_CHG_PREFIX	"max77693-chg:"
+
+/* Registers */
+
+#define MAX77693_CHG_BASE	0xB0
+#define MAX77693_CHG_INT_OK	0xB2
+#define MAX77693_CHG_CNFG_00	0xB7
+#define MAX77693_CHG_CNFG_02	0xB9
+#define MAX77693_CHG_CNFG_06	0xBD
+#define MAX77693_SAFEOUT	0xC6
+
+#define PMIC_NUM_OF_REGS	0xC7
+
+#define MAX77693_CHG_DETBAT	(0x1 << 7)	/* MAX77693_CHG_INT_OK */
+#define MAX77693_CHG_MODE_ON	0x05		/* MAX77693_CHG_CNFG_00 */
+#define MAX77693_CHG_CC		0x3F		/* MAX77693_CHG_CNFG_02	*/
+#define MAX77693_CHG_LOCK	(0x0 << 2)	/* MAX77693_CHG_CNFG_06	*/
+#define MAX77693_CHG_UNLOCK	(0x3 << 2)	/* MAX77693_CHG_CNFG_06	*/
+
+#define MAX77693_PMIC_I2C_ADDR	(0xCC >> 1)
+
+int pmic_init_max77693(unsigned char bus);
+#endif /* __MAX77693_PMIC_H_ */
-- 
1.7.9.5

[U-Boot] [PATCH v3 03/12] arm:exynos:gpio: fix s5p_gpio_part_max for exynos4x12

[Piotr Wilczek]

This patch fix wrong value returned by 's5p_gpio_part_max' function
for Exynos4412.

Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
CC: Minkyu Kang <mk7.kang@samsung.com>

---
Changes in v3: None
Changes in v2:
- new patch

 arch/arm/include/asm/arch-exynos/gpio.h |   17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

diff --git a/arch/arm/include/asm/arch-exynos/gpio.h b/arch/arm/include/asm/arch-exynos/gpio.h
index cfe1024..20a4e3f 100644
--- a/arch/arm/include/asm/arch-exynos/gpio.h
+++ b/arch/arm/include/asm/arch-exynos/gpio.h
@@ -303,10 +303,19 @@ static inline unsigned int s5p_gpio_part_max(int nr)
 			return EXYNOS5_GPIO_PART2_MAX;
 
 	} else if (cpu_is_exynos4()) {
-		if (nr < EXYNOS4_GPIO_PART1_MAX)
-			return 0;
-		else
-			return EXYNOS4_GPIO_PART1_MAX;
+		if (proid_is_exynos4412()) {
+			if (nr < EXYNOS4X12_GPIO_PART1_MAX)
+				return 0;
+			else if (nr < EXYNOS4X12_GPIO_PART2_MAX)
+				return EXYNOS4X12_GPIO_PART1_MAX;
+			else
+				return EXYNOS4X12_GPIO_PART2_MAX;
+		} else {
+			if (nr < EXYNOS4_GPIO_PART1_MAX)
+				return 0;
+			else
+				return EXYNOS4_GPIO_PART1_MAX;
+		}
 	}
 
 	return 0;
-- 
1.7.9.5

[U-Boot] [PATCH v3 04/12] i2c:multi_i2c: adapt file to new i2c framework

[Piotr Wilczek]

This patch change get bus macro to i2c_get_bus_num() function
New macros CONFIG_SOFT_I2C_I2C8_SCL/SDA is added.

Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
CC: Lukasz Majewski <l.majewski@samsung.com>

---
Changes in v3:
- I2C_GET_BUS replaced by i2c_get_bus_num() function

Changes in v2:
- new patch

 board/samsung/common/multi_i2c.c |   37 +++++++++++++++++++++++++++++++++++--
 1 file changed, 35 insertions(+), 2 deletions(-)

diff --git a/board/samsung/common/multi_i2c.c b/board/samsung/common/multi_i2c.c
index d6c3d37..f4735c7 100644
--- a/board/samsung/common/multi_i2c.c
+++ b/board/samsung/common/multi_i2c.c
@@ -24,15 +24,44 @@
 #include <common.h>
 #include <i2c.h>
 
+#ifndef CONFIG_SOFT_I2C_I2C5_SCL
+#define CONFIG_SOFT_I2C_I2C5_SCL 0
+#endif
+#ifndef CONFIG_SOFT_I2C_I2C7_SCL
+#define CONFIG_SOFT_I2C_I2C7_SCL 0
+#endif
+#ifndef CONFIG_SOFT_I2C_I2C8_SCL
+#define CONFIG_SOFT_I2C_I2C8_SCL 0
+#endif
+#ifndef CONFIG_SOFT_I2C_I2C9_SCL
+#define CONFIG_SOFT_I2C_I2C9_SCL 0
+#endif
+#ifndef CONFIG_SOFT_I2C_I2C5_SDA
+#define CONFIG_SOFT_I2C_I2C5_SDA 0
+#endif
+#ifndef CONFIG_SOFT_I2C_I2C7_SDA
+#define CONFIG_SOFT_I2C_I2C7_SDA 0
+#endif
+#ifndef CONFIG_SOFT_I2C_I2C8_SDA
+#define CONFIG_SOFT_I2C_I2C8_SDA 0
+#endif
+#ifndef CONFIG_SOFT_I2C_I2C9_SDA
+#define CONFIG_SOFT_I2C_I2C9_SDA 0
+#endif
+
 /* Handle multiple I2C buses instances */
 int get_multi_scl_pin(void)
 {
-	unsigned int bus = I2C_GET_BUS();
+	unsigned int bus = i2c_get_bus_num();
 
 	switch (bus) {
 	case I2C_0: /* I2C_0 definition - compatibility layer */
 	case I2C_5:
 		return CONFIG_SOFT_I2C_I2C5_SCL;
+	case I2C_7:
+		return CONFIG_SOFT_I2C_I2C7_SCL;
+	case I2C_8:
+		return CONFIG_SOFT_I2C_I2C8_SCL;
 	case I2C_9:
 		return CONFIG_SOFT_I2C_I2C9_SCL;
 	default:
@@ -44,12 +73,16 @@ int get_multi_scl_pin(void)
 
 int get_multi_sda_pin(void)
 {
-	unsigned int bus = I2C_GET_BUS();
+	unsigned int bus = i2c_get_bus_num();
 
 	switch (bus) {
 	case I2C_0: /* I2C_0 definition - compatibility layer */
 	case I2C_5:
 		return CONFIG_SOFT_I2C_I2C5_SDA;
+	case I2C_7:
+		return CONFIG_SOFT_I2C_I2C7_SDA;
+	case I2C_8:
+		return CONFIG_SOFT_I2C_I2C8_SDA;
 	case I2C_9:
 		return CONFIG_SOFT_I2C_I2C9_SDA;
 	default:
-- 
1.7.9.5

[U-Boot] [PATCH v3 05/12] power: fix pmic command

[Piotr Wilczek]

This patch fix automatic i2c bus change when calling subsequent
'pmic' command on diffrent devices connected to separete i2c bus.

Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
CC: Lukasz Majewski <l.majewski@samsung.com>

---
Changes in v3:
- use i2c_set_bus_num() instead I2C_SET_BUS maro
That macro should be completly replaced when all i2c drivers
 are adapted to new i2c framework

Changes in v2:
- new patch

 drivers/power/power_core.c |    8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/power/power_core.c b/drivers/power/power_core.c
index 90df2c5..befd458 100644
--- a/drivers/power/power_core.c
+++ b/drivers/power/power_core.c
@@ -164,6 +164,14 @@ int do_pmic(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	if (!p)
 		return CMD_RET_FAILURE;
 
+	/* this #ifdef should go away when all i2c drivers */
+	/* are adapted to the new i2c framework */
+#ifdef CONFIG_SYS_I2C
+	i2c_set_bus_num(p->bus);
+#else
+	I2C_SET_BUS(p->bus);
+#endif
+
 	if (strcmp(cmd, "dump") == 0) {
 		if (pmic_dump(p))
 			return CMD_RET_FAILURE;
-- 
1.7.9.5

[U-Boot] [PATCH v3 06/12] drivers:power:power_i2c: adapt file to new i2c framework

[Piotr Wilczek]

This patch repalce I2C_SET_BUS macro with i2c_set_bus_num() finction.

Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

---
Changes in v3:
- new patch

Changes in v2: None

 drivers/power/power_i2c.c |    6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/power/power_i2c.c b/drivers/power/power_i2c.c
index 3e5a784..e0f2092 100644
--- a/drivers/power/power_i2c.c
+++ b/drivers/power/power_i2c.c
@@ -114,7 +114,13 @@ int pmic_reg_read(struct pmic *p, u32 reg, u32 *val)
 
 int pmic_probe(struct pmic *p)
 {
+	/* this #ifdef should go away when all i2c drivers */
+	/* are adapted to the new i2c framework */
+#ifdef CONFIG_SYS_I2C
+	i2c_set_bus_num(p->bus);
+#else
 	I2C_SET_BUS(p->bus);
+#endif
 	debug("Bus: %d PMIC:%s probed!\n", p->bus, p->name);
 	if (i2c_probe(pmic_i2c_addr)) {
 		printf("Can't find PMIC:%s\n", p->name);
-- 
1.7.9.5

[U-Boot] [PATCH v3 07/12] driver:i2c:s3c24x0: adapt driver to new i2c framework

[Piotr Wilczek]

The s3c24x0 i2c driver is adapted to new i2c framework.

Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
CC: Minkyu Kang <mk7.kang@samsung.com>

Tested on Trats2
Tested-by: Piotr Wilczek <p.wilczek@samsung.com>
---
Changes in v3: None
Changes in v2: None

 drivers/i2c/Makefile      |    2 +-
 drivers/i2c/s3c24x0_i2c.c |  100 ++++++++++++++++++++++++++-------------------
 2 files changed, 59 insertions(+), 43 deletions(-)

diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index 0298e3e..bae7010 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -36,7 +36,6 @@ COBJS-$(CONFIG_DRIVER_OMAP1510_I2C) += omap1510_i2c.o
 COBJS-$(CONFIG_DRIVER_OMAP24XX_I2C) += omap24xx_i2c.o
 COBJS-$(CONFIG_DRIVER_OMAP34XX_I2C) += omap24xx_i2c.o
 COBJS-$(CONFIG_PCA9564_I2C) += pca9564_i2c.o
-COBJS-$(CONFIG_DRIVER_S3C24X0_I2C) += s3c24x0_i2c.o
 COBJS-$(CONFIG_S3C44B0_I2C) += s3c44b0_i2c.o
 COBJS-$(CONFIG_TSI108_I2C) += tsi108_i2c.o
 COBJS-$(CONFIG_U8500_I2C) += u8500_i2c.o
@@ -47,6 +46,7 @@ COBJS-$(CONFIG_SYS_I2C_FSL) += fsl_i2c.o
 COBJS-$(CONFIG_SYS_I2C_PPC4XX) += ppc4xx_i2c.o
 COBJS-$(CONFIG_SYS_I2C_SOFT) += soft_i2c.o
 COBJS-$(CONFIG_SYS_I2C_TEGRA) += tegra_i2c.o
+COBJS-$(CONFIG_SYS_I2C_S3C24X0) += s3c24x0_i2c.o
 
 COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
diff --git a/drivers/i2c/s3c24x0_i2c.c b/drivers/i2c/s3c24x0_i2c.c
index 46d2506..97f1c00 100644
--- a/drivers/i2c/s3c24x0_i2c.c
+++ b/drivers/i2c/s3c24x0_i2c.c
@@ -39,8 +39,6 @@
 #include <i2c.h>
 #include "s3c24x0_i2c.h"
 
-#ifdef CONFIG_HARD_I2C
-
 #define	I2C_WRITE	0
 #define I2C_READ	1
 
@@ -123,17 +121,17 @@ static void ReadWriteByte(struct s3c24x0_i2c *i2c)
 	writel(readl(&i2c->iiccon) & ~I2CCON_IRPND, &i2c->iiccon);
 }
 
-static struct s3c24x0_i2c *get_base_i2c(void)
+static struct s3c24x0_i2c *get_base_i2c(int bus)
 {
 #ifdef CONFIG_EXYNOS4
 	struct s3c24x0_i2c *i2c = (struct s3c24x0_i2c *)(samsung_get_base_i2c()
 							+ (EXYNOS4_I2C_SPACING
-							* g_current_bus));
+							* bus));
 	return i2c;
 #elif defined CONFIG_EXYNOS5
 	struct s3c24x0_i2c *i2c = (struct s3c24x0_i2c *)(samsung_get_base_i2c()
 							+ (EXYNOS5_I2C_SPACING
-							* g_current_bus));
+							* bus));
 	return i2c;
 #else
 	return s3c24x0_get_base_i2c();
@@ -167,34 +165,7 @@ static void i2c_ch_init(struct s3c24x0_i2c *i2c, int speed, int slaveadd)
 	writel(I2C_MODE_MT | I2C_TXRX_ENA, &i2c->iicstat);
 }
 
-/*
- * MULTI BUS I2C support
- */
-
-#ifdef CONFIG_I2C_MULTI_BUS
-int i2c_set_bus_num(unsigned int bus)
-{
-	struct s3c24x0_i2c *i2c;
-
-	if ((bus < 0) || (bus >= CONFIG_MAX_I2C_NUM)) {
-		debug("Bad bus: %d\n", bus);
-		return -1;
-	}
-
-	g_current_bus = bus;
-	i2c = get_base_i2c();
-	i2c_ch_init(i2c, CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-
-	return 0;
-}
-
-unsigned int i2c_get_bus_num(void)
-{
-	return g_current_bus;
-}
-#endif
-
-void i2c_init(int speed, int slaveadd)
+static void s3c24x0_i2c_init(struct i2c_adapter *adap, int speed, int slaveadd)
 {
 	struct s3c24x0_i2c *i2c;
 #if !(defined CONFIG_EXYNOS4 || defined CONFIG_EXYNOS5)
@@ -204,7 +175,7 @@ void i2c_init(int speed, int slaveadd)
 
 	/* By default i2c channel 0 is the current bus */
 	g_current_bus = 0;
-	i2c = get_base_i2c();
+	i2c = get_base_i2c(adap->hwadapnr);
 
 	/* wait for some time to give previous transfer a chance to finish */
 	i = I2C_TIMEOUT * 1000;
@@ -417,12 +388,12 @@ static int i2c_transfer(struct s3c24x0_i2c *i2c,
 	return result;
 }
 
-int i2c_probe(uchar chip)
+static int s3c24x0_i2c_probe(struct i2c_adapter *adap, uchar chip)
 {
 	struct s3c24x0_i2c *i2c;
 	uchar buf[1];
 
-	i2c = get_base_i2c();
+	i2c = get_base_i2c(adap->hwadapnr);
 	buf[0] = 0;
 
 	/*
@@ -433,7 +404,8 @@ int i2c_probe(uchar chip)
 	return i2c_transfer(i2c, I2C_READ, chip << 1, 0, 0, buf, 1) != I2C_OK;
 }
 
-int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
+static int s3c24x0_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr,
+			    int alen, uchar *buffer, int len)
 {
 	struct s3c24x0_i2c *i2c;
 	uchar xaddr[4];
@@ -467,7 +439,7 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
 		chip |= ((addr >> (alen * 8)) &
 			 CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
 #endif
-	i2c = get_base_i2c();
+	i2c = get_base_i2c(adap->hwadapnr);
 	ret = i2c_transfer(i2c, I2C_READ, chip << 1, &xaddr[4 - alen], alen,
 			buffer, len);
 	if (ret != 0) {
@@ -477,7 +449,8 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
 	return 0;
 }
 
-int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
+static int s3c24x0_i2c_write(struct i2c_adapter *adap, uchar chip, uint addr,
+			     int alen, uchar *buffer, int len)
 {
 	struct s3c24x0_i2c *i2c;
 	uchar xaddr[4];
@@ -509,7 +482,7 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
 		chip |= ((addr >> (alen * 8)) &
 			 CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
 #endif
-	i2c = get_base_i2c();
+	i2c = get_base_i2c(adap->hwadapnr);
 	return (i2c_transfer
 		(i2c, I2C_WRITE, chip << 1, &xaddr[4 - alen], alen, buffer,
 		 len) != 0);
@@ -580,10 +553,53 @@ int i2c_reset_port_fdt(const void *blob, int node)
 		return -1;
 	}
 
-	i2c_ch_init(i2c->regs, CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+	i2c_ch_init(i2c->regs, CONFIG_SYS_I2C_S3C24X0_SPEED,
+		    CONFIG_SYS_I2C_S3C24X0_SLAVE);
 
 	return 0;
 }
 #endif
 
-#endif /* CONFIG_HARD_I2C */
+/*
+ * Register soft i2c adapters
+ */
+U_BOOT_I2C_ADAP_COMPLETE(s3c24x0_0, s3c24x0_i2c_init, s3c24x0_i2c_probe,
+			 s3c24x0_i2c_read, s3c24x0_i2c_write, NULL,
+			 CONFIG_SYS_I2C_S3C24X0_SPEED,
+			 CONFIG_SYS_I2C_S3C24X0_SLAVE,
+			 0)
+U_BOOT_I2C_ADAP_COMPLETE(s3c24x0_1, s3c24x0_i2c_init, s3c24x0_i2c_probe,
+			 s3c24x0_i2c_read, s3c24x0_i2c_write, NULL,
+			 CONFIG_SYS_I2C_S3C24X0_SPEED,
+			 CONFIG_SYS_I2C_S3C24X0_SLAVE,
+			 1)
+U_BOOT_I2C_ADAP_COMPLETE(s3c24x0_2, s3c24x0_i2c_init, s3c24x0_i2c_probe,
+			 s3c24x0_i2c_read, s3c24x0_i2c_write, NULL,
+			 CONFIG_SYS_I2C_S3C24X0_SPEED,
+			 CONFIG_SYS_I2C_S3C24X0_SLAVE,
+			 2)
+U_BOOT_I2C_ADAP_COMPLETE(s3c24x0_3, s3c24x0_i2c_init, s3c24x0_i2c_probe,
+			 s3c24x0_i2c_read, s3c24x0_i2c_write, NULL,
+			 CONFIG_SYS_I2C_S3C24X0_SPEED,
+			 CONFIG_SYS_I2C_S3C24X0_SLAVE,
+			 3)
+U_BOOT_I2C_ADAP_COMPLETE(s3c24x0_4, s3c24x0_i2c_init, s3c24x0_i2c_probe,
+			 s3c24x0_i2c_read, s3c24x0_i2c_write, NULL,
+			 CONFIG_SYS_I2C_S3C24X0_SPEED,
+			 CONFIG_SYS_I2C_S3C24X0_SLAVE,
+			 4)
+U_BOOT_I2C_ADAP_COMPLETE(s3c24x0_5, s3c24x0_i2c_init, s3c24x0_i2c_probe,
+			 s3c24x0_i2c_read, s3c24x0_i2c_write, NULL,
+			 CONFIG_SYS_I2C_S3C24X0_SPEED,
+			 CONFIG_SYS_I2C_S3C24X0_SLAVE,
+			 5)
+U_BOOT_I2C_ADAP_COMPLETE(s3c24x0_6, s3c24x0_i2c_init, s3c24x0_i2c_probe,
+			 s3c24x0_i2c_read, s3c24x0_i2c_write, NULL,
+			 CONFIG_SYS_I2C_S3C24X0_SPEED,
+			 CONFIG_SYS_I2C_S3C24X0_SLAVE,
+			 6)
+U_BOOT_I2C_ADAP_COMPLETE(s3c24x0_7, s3c24x0_i2c_init, s3c24x0_i2c_probe,
+			 s3c24x0_i2c_read, s3c24x0_i2c_write, NULL,
+			 CONFIG_SYS_I2C_S3C24X0_SPEED,
+			 CONFIG_SYS_I2C_S3C24X0_SLAVE,
+			 7)
-- 
1.7.9.5

[U-Boot] [PATCH v3 08/12] drivers:video:s6e8ax0: change data_to_send array to static

[Piotr Wilczek]

This patch change 'data_to_send' array to static to avoid
unaligned access exeption on some platforms (ex Trats2).

Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
CC: Minkyu Kang <mk7.kang@samsung.com>
CC: Anatolij Gustschin <agust@denx.de>

---
Changes in v3: None
Changes in v2:
- new patch

 drivers/video/s6e8ax0.c |   26 +++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)

diff --git a/drivers/video/s6e8ax0.c b/drivers/video/s6e8ax0.c
index 176c518..f6db694 100644
--- a/drivers/video/s6e8ax0.c
+++ b/drivers/video/s6e8ax0.c
@@ -29,7 +29,7 @@ static void s6e8ax0_panel_cond(struct mipi_dsim_device *dsim_dev)
 {
 	struct mipi_dsim_master_ops *ops = dsim_dev->master_ops;
 	int reverse = dsim_dev->dsim_lcd_dev->reverse_panel;
-	const unsigned char data_to_send[] = {
+	static const unsigned char data_to_send[] = {
 		0xf8, 0x3d, 0x35, 0x00, 0x00, 0x00, 0x8d, 0x00, 0x4c,
 		0x6e, 0x10, 0x27, 0x7d, 0x3f, 0x10, 0x00, 0x00, 0x20,
 		0x04, 0x08, 0x6e, 0x00, 0x00, 0x00, 0x02, 0x08, 0x08,
@@ -37,7 +37,7 @@ static void s6e8ax0_panel_cond(struct mipi_dsim_device *dsim_dev)
 		0xff, 0xff, 0xc8
 	};
 
-	const unsigned char data_to_send_reverse[] = {
+	static const unsigned char data_to_send_reverse[] = {
 		0xf8, 0x19, 0x35, 0x00, 0x00, 0x00, 0x93, 0x00, 0x3c,
 		0x7d, 0x08, 0x27, 0x7d, 0x3f, 0x00, 0x00, 0x00, 0x20,
 		0x04, 0x08, 0x6e, 0x00, 0x00, 0x00, 0x02, 0x08, 0x08,
@@ -58,7 +58,7 @@ static void s6e8ax0_panel_cond(struct mipi_dsim_device *dsim_dev)
 static void s6e8ax0_display_cond(struct mipi_dsim_device *dsim_dev)
 {
 	struct mipi_dsim_master_ops *ops = dsim_dev->master_ops;
-	const unsigned char data_to_send[] = {
+	static const unsigned char data_to_send[] = {
 		0xf2, 0x80, 0x03, 0x0d
 	};
 
@@ -71,7 +71,7 @@ static void s6e8ax0_gamma_cond(struct mipi_dsim_device *dsim_dev)
 {
 	struct mipi_dsim_master_ops *ops = dsim_dev->master_ops;
 	/* 7500K 2.2 Set : 30cd */
-	const unsigned char data_to_send[] = {
+	static const unsigned char data_to_send[] = {
 		0xfa, 0x01, 0x60, 0x10, 0x60, 0xf5, 0x00, 0xff, 0xad,
 		0xaf, 0xba, 0xc3, 0xd8, 0xc5, 0x9f, 0xc6, 0x9e, 0xc1,
 		0xdc, 0xc0, 0x00, 0x61, 0x00, 0x5a, 0x00, 0x74,
@@ -92,7 +92,7 @@ static void s6e8ax0_gamma_update(struct mipi_dsim_device *dsim_dev)
 static void s6e8ax0_etc_source_control(struct mipi_dsim_device *dsim_dev)
 {
 	struct mipi_dsim_master_ops *ops = dsim_dev->master_ops;
-	const unsigned char data_to_send[] = {
+	static const unsigned char data_to_send[] = {
 		0xf6, 0x00, 0x02, 0x00
 	};
 
@@ -104,7 +104,7 @@ static void s6e8ax0_etc_source_control(struct mipi_dsim_device *dsim_dev)
 static void s6e8ax0_etc_pentile_control(struct mipi_dsim_device *dsim_dev)
 {
 	struct mipi_dsim_master_ops *ops = dsim_dev->master_ops;
-	const unsigned char data_to_send[] = {
+	static const unsigned char data_to_send[] = {
 		0xb6, 0x0c, 0x02, 0x03, 0x32, 0xff, 0x44, 0x44, 0xc0,
 		0x00
 	};
@@ -117,7 +117,7 @@ static void s6e8ax0_etc_pentile_control(struct mipi_dsim_device *dsim_dev)
 static void s6e8ax0_etc_mipi_control1(struct mipi_dsim_device *dsim_dev)
 {
 	struct mipi_dsim_master_ops *ops = dsim_dev->master_ops;
-	const unsigned char data_to_send[] = {
+	static const unsigned char data_to_send[] = {
 		0xe1, 0x10, 0x1c, 0x17, 0x08, 0x1d
 	};
 
@@ -129,7 +129,7 @@ static void s6e8ax0_etc_mipi_control1(struct mipi_dsim_device *dsim_dev)
 static void s6e8ax0_etc_mipi_control2(struct mipi_dsim_device *dsim_dev)
 {
 	struct mipi_dsim_master_ops *ops = dsim_dev->master_ops;
-	const unsigned char data_to_send[] = {
+	static const unsigned char data_to_send[] = {
 		0xe2, 0xed, 0x07, 0xc3, 0x13, 0x0d, 0x03
 	};
 
@@ -141,7 +141,7 @@ static void s6e8ax0_etc_mipi_control2(struct mipi_dsim_device *dsim_dev)
 static void s6e8ax0_etc_power_control(struct mipi_dsim_device *dsim_dev)
 {
 	struct mipi_dsim_master_ops *ops = dsim_dev->master_ops;
-	const unsigned char data_to_send[] = {
+	static const unsigned char data_to_send[] = {
 		0xf4, 0xcf, 0x0a, 0x12, 0x10, 0x19, 0x33, 0x02
 	};
 
@@ -159,7 +159,7 @@ static void s6e8ax0_etc_mipi_control3(struct mipi_dsim_device *dsim_dev)
 static void s6e8ax0_etc_mipi_control4(struct mipi_dsim_device *dsim_dev)
 {
 	struct mipi_dsim_master_ops *ops = dsim_dev->master_ops;
-	const unsigned char data_to_send[] = {
+	static const unsigned char data_to_send[] = {
 		0xe4, 0x00, 0x00, 0x14, 0x80, 0x00, 0x00, 0x00
 	};
 
@@ -170,7 +170,7 @@ static void s6e8ax0_etc_mipi_control4(struct mipi_dsim_device *dsim_dev)
 static void s6e8ax0_elvss_set(struct mipi_dsim_device *dsim_dev)
 {
 	struct mipi_dsim_master_ops *ops = dsim_dev->master_ops;
-	const unsigned char data_to_send[] = {
+	static const unsigned char data_to_send[] = {
 		0xb1, 0x04, 0x00
 	};
 
@@ -198,7 +198,7 @@ static void s6e8ax0_sleep_out(struct mipi_dsim_device *dsim_dev)
 static void s6e8ax0_apply_level1_key(struct mipi_dsim_device *dsim_dev)
 {
 	struct mipi_dsim_master_ops *ops = dsim_dev->master_ops;
-	const unsigned char data_to_send[] = {
+	static const unsigned char data_to_send[] = {
 		0xf0, 0x5a, 0x5a
 	};
 
@@ -209,7 +209,7 @@ static void s6e8ax0_apply_level1_key(struct mipi_dsim_device *dsim_dev)
 static void s6e8ax0_apply_mtp_key(struct mipi_dsim_device *dsim_dev)
 {
 	struct mipi_dsim_master_ops *ops = dsim_dev->master_ops;
-	const unsigned char data_to_send[] = {
+	static const unsigned char data_to_send[] = {
 		0xf1, 0x5a, 0x5a
 	};
 
-- 
1.7.9.5

[U-Boot] [PATCH v3 09/12] drivers:lcd: fix unaligned access on lcd

[Piotr Wilczek]

This patch replace 'le32_to_cpu' function with 'get_unaligend_le32' to
avoid unaligned access exception on some ARM platforms (ex Trats2).

Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
CC: Anatolij Gustschin <agust@denx.de>

---
Changes in v3: None
Changes in v2:
- new patch

 common/lcd.c |   12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/common/lcd.c b/common/lcd.c
index edae835..577a452 100644
--- a/common/lcd.c
+++ b/common/lcd.c
@@ -42,6 +42,7 @@
 #endif
 #include <lcd.h>
 #include <watchdog.h>
+#include <asm/unaligned.h>
 
 #if defined(CONFIG_CPU_PXA25X) || defined(CONFIG_CPU_PXA27X) || \
 	defined(CONFIG_CPU_MONAHANS)
@@ -907,9 +908,9 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y)
 		return 1;
 	}
 
-	width = le32_to_cpu(bmp->header.width);
-	height = le32_to_cpu(bmp->header.height);
-	bmp_bpix = le16_to_cpu(bmp->header.bit_count);
+	width = get_unaligned_le32(&bmp->header.width);
+	height = get_unaligned_le32(&bmp->header.height);
+	bmp_bpix = get_unaligned_le32(&bmp->header.bit_count);
 	colors = 1 << bmp_bpix;
 
 	bpix = NBITS(panel_info.vl_bpix);
@@ -994,7 +995,7 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y)
 	if ((y + height) > panel_info.vl_row)
 		height = panel_info.vl_row - y;
 
-	bmap = (uchar *) bmp + le32_to_cpu(bmp->header.data_offset);
+	bmap = (uchar *)bmp + get_unaligned_le32(&bmp->header.data_offset);
 	fb   = (uchar *) (lcd_base +
 		(y + height - 1) * lcd_line_length + x * bpix / 8);
 
@@ -1002,7 +1003,8 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y)
 	case 1: /* pass through */
 	case 8:
 #ifdef CONFIG_LCD_BMP_RLE8
-		if (le32_to_cpu(bmp->header.compression) == BMP_BI_RLE8) {
+		if (get_unaligned_le32(&bmp->header.compression) ==
+		    BMP_BI_RLE8) {
 			if (bpix != 16) {
 				/* TODO implement render code for bpix != 16 */
 				printf("Error: only support 16 bpix");
-- 
1.7.9.5

[U-Boot] [PATCH v3 10/12] samsung: trats2: add support for new board Trats2

[Piotr Wilczek]

This patch add support for a new Samsung board Trats2.

Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

---
Changes in v3:
- add Maintainer entry
- changed T-flash detect pin to GPX3[3]
- removed MMC_ASYNC
- swiched to new i2c framework, use hardware and soft i2c
- adapted s3c24x0 i2c driver to new i2c framework

Changes in v2:
- removed lcd callback in panel_info
- changed i2c from hardware to software
- use max77693 multifunction pmic

 MAINTAINERS                   |    4 +
 board/samsung/trats2/Makefile |   50 ++++
 board/samsung/trats2/trats2.c |  533 +++++++++++++++++++++++++++++++++++++++++
 boards.cfg                    |    1 +
 include/configs/trats2.h      |  326 +++++++++++++++++++++++++
 5 files changed, 914 insertions(+)
 create mode 100644 board/samsung/trats2/Makefile
 create mode 100644 board/samsung/trats2/trats2.c
 create mode 100644 include/configs/trats2.h

diff --git a/MAINTAINERS b/MAINTAINERS
index 643a5ac..070474a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1014,6 +1014,10 @@ Matthias Weisser <weisserm@arcor.de>
 	jadecpu		ARM926EJS (MB86R01 SoC)
 	zmx25		ARM926EJS (imx25 SoC)
 
+Piotr Wilczek <p.wilczek@samsung.com>
+
+	trats2		ARM ARMV7 (EXYNOS4412 SoC)
+
 Richard Woodruff <r-woodruff2@ti.com>
 
 	omap2420h4	ARM1136EJS
diff --git a/board/samsung/trats2/Makefile b/board/samsung/trats2/Makefile
new file mode 100644
index 0000000..7f507cc
--- /dev/null
+++ b/board/samsung/trats2/Makefile
@@ -0,0 +1,50 @@
+#
+# Copyright (c) 2000 - 2011 Samsung Electronics Co., Ltd. All rights reserved.
+# Sanghee Kim <sh0130.kim@samsung.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).o
+
+COBJS-y	:= trats2.o
+
+SRCS    := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS-y))
+
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+clean:
+	rm -f $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/samsung/trats2/trats2.c b/board/samsung/trats2/trats2.c
new file mode 100644
index 0000000..e3180df
--- /dev/null
+++ b/board/samsung/trats2/trats2.c
@@ -0,0 +1,533 @@
+/*
+ * Copyright (c) 2000 - 2013 Samsung Electronics Co., Ltd. All rights reserved.
+ * Sanghee Kim <sh0130.kim@samsung.com>
+ * Piotr Wilczek <p.wilczek@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <lcd.h>
+#include <spi.h>
+#include <asm/io.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/mmc.h>
+#include <asm/arch/power.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/mipi_dsim.h>
+#include <asm/arch/pinmux.h>
+#include <mmc.h>
+#include <fat.h>
+#include <asm/arch/power.h>
+#include <power/pmic.h>
+#include <power/max77686_pmic.h>
+#include <power/battery.h>
+#include <power/max77693_pmic.h>
+#include <power/max77693_muic.h>
+#include <power/max77693_fg.h>
+#include <libtizen.h>
+#include <errno.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static struct exynos4x12_gpio_part1 *gpio1;
+static struct exynos4x12_gpio_part2 *gpio2;
+
+static unsigned int board_rev = -1;
+
+static inline u32 get_model_rev(void);
+
+static void check_hw_revision(void)
+{
+	int modelrev = 0;
+	int i;
+
+	/*
+	 * GPM1[1:0]: MODEL_REV[1:0]
+	 * Don't set as pull-none for these N/C pin.
+	 * TRM say that it may cause unexcepted state and leakage current.
+	 * and pull-none is only for output function.
+	 */
+	for (i = 0; i < 2; i++)
+		s5p_gpio_cfg_pin(&gpio2->m1, i, GPIO_INPUT);
+
+	/* GPM1[5:2]: HW_REV[3:0] */
+	for (i = 2; i < 6; i++) {
+		s5p_gpio_cfg_pin(&gpio2->m1, i, GPIO_INPUT);
+		s5p_gpio_set_pull(&gpio2->m1, i, GPIO_PULL_NONE);
+	}
+
+	/* GPM1[1:0]: MODEL_REV[1:0] */
+	for (i = 0; i < 2; i++)
+		modelrev |= (s5p_gpio_get_value(&gpio2->m1, i) << i);
+
+	/* board_rev[15:8] = model */
+	board_rev = modelrev << 8;
+}
+
+#ifdef CONFIG_DISPLAY_BOARDINFO
+int checkboard(void)
+{
+	puts("Board:\tTRATS2\n");
+	return 0;
+}
+#endif
+
+static void show_hw_revision(void)
+{
+	printf("HW Revision:\t0x%04x\n", board_rev);
+}
+
+u32 get_board_rev(void)
+{
+	return board_rev;
+}
+
+static inline u32 get_model_rev(void)
+{
+	return (board_rev >> 8) & 0xff;
+}
+
+static void board_external_gpio_init(void)
+{
+	/*
+	 * some pins which in alive block are connected with external pull-up
+	 * but it's default setting is pull-down.
+	 * if that pin set as input then that floated
+	 */
+
+	s5p_gpio_set_pull(&gpio2->x0, 2, GPIO_PULL_NONE);	/* PS_ALS_INT */
+	s5p_gpio_set_pull(&gpio2->x0, 4, GPIO_PULL_NONE);	/* TSP_nINT */
+	s5p_gpio_set_pull(&gpio2->x0, 7, GPIO_PULL_NONE);	/* AP_PMIC_IRQ*/
+	s5p_gpio_set_pull(&gpio2->x1, 5, GPIO_PULL_NONE);	/* IF_PMIC_IRQ*/
+	s5p_gpio_set_pull(&gpio2->x2, 0, GPIO_PULL_NONE);	/* VOL_UP */
+	s5p_gpio_set_pull(&gpio2->x2, 1, GPIO_PULL_NONE);	/* VOL_DOWN */
+	s5p_gpio_set_pull(&gpio2->x2, 3, GPIO_PULL_NONE);	/* FUEL_ALERT */
+	s5p_gpio_set_pull(&gpio2->x2, 4, GPIO_PULL_NONE);	/* ADC_INT */
+	s5p_gpio_set_pull(&gpio2->x2, 7, GPIO_PULL_NONE);	/* nPOWER */
+	s5p_gpio_set_pull(&gpio2->x3, 0, GPIO_PULL_NONE);	/* WPC_INT */
+	s5p_gpio_set_pull(&gpio2->x3, 5, GPIO_PULL_NONE);	/* OK_KEY */
+	s5p_gpio_set_pull(&gpio2->x3, 7, GPIO_PULL_NONE);	/* HDMI_HPD */
+}
+
+#ifdef CONFIG_SYS_I2C_INIT_BOARD
+static void board_init_i2c(void)
+{
+	gpio1 = (struct exynos4x12_gpio_part1 *)EXYNOS4X12_GPIO_PART1_BASE;
+	gpio2 = (struct exynos4x12_gpio_part2 *)EXYNOS4X12_GPIO_PART2_BASE;
+	int err;
+
+	/* I2C_7 */
+	err = exynos_pinmux_config(PERIPH_ID_I2C7, PINMUX_FLAG_NONE);
+	if (err) {
+		debug("I2C%d not configured\n", (I2C_7));
+		return;
+	}
+
+	/* I2C_8 */
+	s5p_gpio_direction_output(&gpio1->f1, 4, 1);
+	s5p_gpio_direction_output(&gpio1->f1, 5, 1);
+
+	/* I2C_9 */
+	s5p_gpio_direction_output(&gpio2->m2, 1, 1);
+	s5p_gpio_direction_output(&gpio2->m2, 0, 1);
+}
+#endif
+
+int board_early_init_f(void)
+{
+	gpio1 = (struct exynos4x12_gpio_part1 *)EXYNOS4X12_GPIO_PART1_BASE;
+	gpio2 = (struct exynos4x12_gpio_part2 *)EXYNOS4X12_GPIO_PART2_BASE;
+
+	check_hw_revision();
+	board_external_gpio_init();
+
+	gd->flags |= GD_FLG_DISABLE_CONSOLE;
+
+	return 0;
+}
+
+static int pmic_init_max77686(void);
+
+int board_init(void)
+{
+	gpio1 = (struct exynos4x12_gpio_part1 *)EXYNOS4X12_GPIO_PART1_BASE;
+	gpio2 = (struct exynos4x12_gpio_part2 *)EXYNOS4X12_GPIO_PART2_BASE;
+
+	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+
+	/* workaround: clear INFORM4..5 */
+	writel(0, 0x10020810);
+	writel(0, 0x10020810 + 4);
+
+	return 0;
+}
+
+int power_init_board(void)
+{
+	int chrg;
+	struct power_battery *pb;
+	struct pmic *p_chrg, *p_muic, *p_fg, *p_bat;
+
+#ifdef CONFIG_SYS_I2C_INIT_BOARD
+	board_init_i2c();
+#endif
+	pmic_init(I2C_7);
+
+	pmic_init_max77686();
+	pmic_init_max77693(I2C_9);
+	power_muic_init(I2C_9);
+	power_fg_init(I2C_8);
+	power_bat_init(0);
+
+	p_chrg = pmic_get("MAX77693_PMIC");
+	if (!p_chrg) {
+		puts("MAX77693_PMIC: Not found\n");
+		return -ENODEV;
+	}
+
+	p_muic = pmic_get("MAX77693_MUIC");
+	if (!p_muic) {
+		puts("MAX77693_MUIC: Not found\n");
+		return -ENODEV;
+	}
+
+	p_fg = pmic_get("MAX77693_FG");
+	if (!p_fg) {
+		puts("MAX17042_FG: Not found\n");
+		return -ENODEV;
+	}
+
+	if (p_chrg->chrg->chrg_bat_present(p_chrg) == 0)
+		puts("No battery detected\n");
+
+	p_bat = pmic_get("BAT_TRATS2");
+	if (!p_bat) {
+		puts("BAT_TRATS2: Not found\n");
+		return -ENODEV;
+	}
+
+	p_fg->parent =  p_bat;
+	p_chrg->parent = p_bat;
+	p_muic->parent = p_bat;
+
+	p_bat->pbat->battery_init(p_bat, p_fg, p_chrg, p_muic);
+
+	pb = p_bat->pbat;
+	chrg = p_muic->chrg->chrg_type(p_muic);
+	debug("CHARGER TYPE: %d\n", chrg);
+
+	if (!p_chrg->chrg->chrg_bat_present(p_chrg)) {
+		puts("No battery detected\n");
+		return -1;
+	}
+
+	p_fg->fg->fg_battery_check(p_fg, p_bat);
+
+	if (pb->bat->state == CHARGE && chrg == CHARGER_USB)
+		puts("CHARGE Battery !\n");
+
+	return 0;
+}
+
+int dram_init(void)
+{
+	u32 size_mb;
+
+	size_mb = (get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE) +
+		get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE) +
+		get_ram_size((long *)PHYS_SDRAM_3, PHYS_SDRAM_3_SIZE) +
+		get_ram_size((long *)PHYS_SDRAM_4, PHYS_SDRAM_4_SIZE)) >> 20;
+
+	gd->ram_size = size_mb << 20;
+
+	return 0;
+}
+
+void dram_init_banksize(void)
+{
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
+	gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
+	gd->bd->bi_dram[2].start = PHYS_SDRAM_3;
+	gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE;
+	gd->bd->bi_dram[3].start = PHYS_SDRAM_4;
+	gd->bd->bi_dram[3].size = PHYS_SDRAM_4_SIZE;
+}
+
+int board_mmc_init(bd_t *bis)
+{
+	int err;
+
+	/* eMMC_EN: SD_0_CDn: GPK0[2] Output High */
+	s5p_gpio_direction_output(&gpio2->k0, 2, 1);
+	s5p_gpio_set_pull(&gpio2->k0, 2, GPIO_PULL_NONE);
+
+	/*
+	 * eMMC GPIO:
+	 * SDR 8-bit at 48MHz at MMC0
+	 * GPK0[0]      SD_0_CLK(2)
+	 * GPK0[1]      SD_0_CMD(2)
+	 * GPK0[2]      SD_0_CDn        -> Not used
+	 * GPK0[3:6]    SD_0_DATA[0:3](2)
+	 * GPK1[3:6]    SD_0_DATA[0:3](3)
+	 *
+	 * DDR 4-bit at 26MHz at MMC4
+	 * GPK0[0]      SD_4_CLK(3)
+	 * GPK0[1]      SD_4_CMD(3)
+	 * GPK0[2]      SD_4_CDn        -> Not used
+	 * GPK0[3:6]    SD_4_DATA[0:3](3)
+	 * GPK1[3:6]    SD_4_DATA[4:7](4)
+	 */
+
+	err = exynos_pinmux_config(PERIPH_ID_SDMMC0, PINMUX_FLAG_8BIT_MODE);
+
+	/*
+	 * MMC device init
+	 * mmc0  : eMMC (8-bit buswidth)
+	 * mmc2  : SD card (4-bit buswidth)
+	 */
+	if (err)
+		debug("SDMMC0 not configured\n");
+	else
+		err = s5p_mmc_init(0, 8);
+
+	/* T-flash detect */
+	s5p_gpio_cfg_pin(&gpio2->x3, 4, 0xf);
+	s5p_gpio_set_pull(&gpio2->x3, 4, GPIO_PULL_UP);
+
+	/*
+	 * Check the T-flash  detect pin
+	 * GPX3[4] T-flash detect pin
+	 */
+	if (!s5p_gpio_get_value(&gpio2->x3, 4)) {
+		err = exynos_pinmux_config(PERIPH_ID_SDMMC2, PINMUX_FLAG_NONE);
+		if (err)
+			debug("SDMMC2 not configured\n");
+		else
+			err = s5p_mmc_init(2, 4);
+	}
+
+	return err;
+}
+
+static int pmic_init_max77686(void)
+{
+	struct pmic *p = pmic_get("MAX77686_PMIC");
+
+	i2c_set_bus_num(I2C_7);
+	if (pmic_probe(p))
+		return -1;
+
+	/* BUCK/LDO Output Voltage */
+	max77686_set_ldo_voltage(p, 21, 2800000);	/* LDO21 VTF_2.8V */
+	max77686_set_ldo_voltage(p, 23, 3300000);	/* LDO23 TSP_AVDD_3.3V*/
+	max77686_set_ldo_voltage(p, 24, 1800000);	/* LDO24 TSP_VDD_1.8V */
+
+	/* BUCK/LDO Output Mode */
+	max77686_set_buck_mode(p, 1, OPMODE_STANDBY);	/* BUCK1 VMIF_1.1V_AP */
+	max77686_set_buck_mode(p, 2, OPMODE_ON);	/* BUCK2 VARM_1.0V_AP */
+	max77686_set_buck_mode(p, 3, OPMODE_ON);	/* BUCK3 VINT_1.0V_AP */
+	max77686_set_buck_mode(p, 4, OPMODE_ON);	/* BUCK4 VG3D_1.0V_AP */
+	max77686_set_buck_mode(p, 5, OPMODE_ON);	/* BUCK5 VMEM_1.2V_AP */
+	max77686_set_buck_mode(p, 6, OPMODE_ON);	/* BUCK6 VCC_SUB_1.35V*/
+	max77686_set_buck_mode(p, 7, OPMODE_ON);	/* BUCK7 VCC_SUB_2.0V */
+	max77686_set_buck_mode(p, 8, OPMODE_OFF);	/* VMEM_VDDF_2.85V */
+	max77686_set_buck_mode(p, 9, OPMODE_OFF);	/* CAM_ISP_CORE_1.2V*/
+
+	max77686_set_ldo_mode(p, 1, OPMODE_LPM);	/* LDO1 VALIVE_1.0V_AP*/
+	max77686_set_ldo_mode(p, 2, OPMODE_STANDBY);	/* LDO2 VM1M2_1.2V_AP */
+	max77686_set_ldo_mode(p, 3, OPMODE_LPM);	/* LDO3 VCC_1.8V_AP */
+	max77686_set_ldo_mode(p, 4, OPMODE_LPM);	/* LDO4 VCC_2.8V_AP */
+	max77686_set_ldo_mode(p, 5, OPMODE_OFF);	/* LDO5_VCC_1.8V_IO */
+	max77686_set_ldo_mode(p, 6, OPMODE_STANDBY);	/* LDO6 VMPLL_1.0V_AP */
+	max77686_set_ldo_mode(p, 7, OPMODE_STANDBY);	/* LDO7 VPLL_1.0V_AP */
+	max77686_set_ldo_mode(p, 8, OPMODE_LPM);	/* LDO8 VMIPI_1.0V_AP */
+	max77686_set_ldo_mode(p, 9, OPMODE_OFF);	/* CAM_ISP_MIPI_1.2*/
+	max77686_set_ldo_mode(p, 10, OPMODE_LPM);	/* LDO10 VMIPI_1.8V_AP*/
+	max77686_set_ldo_mode(p, 11, OPMODE_STANDBY);	/* LDO11 VABB1_1.8V_AP*/
+	max77686_set_ldo_mode(p, 12, OPMODE_LPM);	/* LDO12 VUOTG_3.0V_AP*/
+	max77686_set_ldo_mode(p, 13, OPMODE_OFF);	/* LDO13 VC2C_1.8V_AP */
+	max77686_set_ldo_mode(p, 14, OPMODE_STANDBY);	/* VABB02_1.8V_AP */
+	max77686_set_ldo_mode(p, 15, OPMODE_STANDBY);	/* LDO15 VHSIC_1.0V_AP*/
+	max77686_set_ldo_mode(p, 16, OPMODE_STANDBY);	/* LDO16 VHSIC_1.8V_AP*/
+	max77686_set_ldo_mode(p, 17, OPMODE_OFF);	/* CAM_SENSOR_CORE_1.2*/
+	max77686_set_ldo_mode(p, 18, OPMODE_OFF);	/* CAM_ISP_SEN_IO_1.8V*/
+	max77686_set_ldo_mode(p, 19, OPMODE_OFF);	/* LDO19 VT_CAM_1.8V */
+	max77686_set_ldo_mode(p, 20, OPMODE_ON);	/* LDO20 VDDQ_PRE_1.8V*/
+	max77686_set_ldo_mode(p, 21, OPMODE_OFF);	/* LDO21 VTF_2.8V */
+	max77686_set_ldo_mode(p, 22, OPMODE_OFF);	/* LDO22 VMEM_VDD_2.8V*/
+	max77686_set_ldo_mode(p, 23, OPMODE_OFF);	/* LDO23 TSP_AVDD_3.3V*/
+	max77686_set_ldo_mode(p, 24, OPMODE_OFF);	/* LDO24 TSP_VDD_1.8V */
+	max77686_set_ldo_mode(p, 25, OPMODE_OFF);	/* LDO25 VCC_3.3V_LCD */
+	max77686_set_ldo_mode(p, 26, OPMODE_OFF);	/*LDO26 VCC_3.0V_MOTOR*/
+
+	return 0;
+}
+
+/*
+ * LCD
+ */
+
+#ifdef CONFIG_LCD
+static struct mipi_dsim_config dsim_config = {
+	.e_interface		= DSIM_VIDEO,
+	.e_virtual_ch		= DSIM_VIRTUAL_CH_0,
+	.e_pixel_format		= DSIM_24BPP_888,
+	.e_burst_mode		= DSIM_BURST_SYNC_EVENT,
+	.e_no_data_lane		= DSIM_DATA_LANE_4,
+	.e_byte_clk		= DSIM_PLL_OUT_DIV8,
+	.hfp			= 1,
+
+	.p			= 3,
+	.m			= 120,
+	.s			= 1,
+
+	/* D-PHY PLL stable time spec :min = 200usec ~ max 400usec */
+	.pll_stable_time	= 500,
+
+	/* escape clk : 10MHz */
+	.esc_clk		= 20 * 1000000,
+
+	/* stop state holding counter after bta change count 0 ~ 0xfff */
+	.stop_holding_cnt	= 0x7ff,
+	/* bta timeout 0 ~ 0xff */
+	.bta_timeout		= 0xff,
+	/* lp rx timeout 0 ~ 0xffff */
+	.rx_timeout		= 0xffff,
+};
+
+static struct exynos_platform_mipi_dsim dsim_platform_data = {
+	.lcd_panel_info = NULL,
+	.dsim_config = &dsim_config,
+};
+
+static struct mipi_dsim_lcd_device mipi_lcd_device = {
+	.name	= "s6e8ax0",
+	.id	= -1,
+	.bus_id	= 0,
+	.platform_data	= (void *)&dsim_platform_data,
+};
+
+static int mipi_power(void)
+{
+	struct pmic *p = pmic_get("MAX77686_PMIC");
+
+	/* LDO8 VMIPI_1.0V_AP */
+	max77686_set_ldo_mode(p, 8, OPMODE_ON);
+	/* LDO10 VMIPI_1.8V_AP */
+	max77686_set_ldo_mode(p, 10, OPMODE_ON);
+
+	return 0;
+}
+
+void exynos_lcd_power_on(void)
+{
+	struct pmic *p = pmic_get("MAX77686_PMIC");
+
+	/* LCD_2.2V_EN: GPC0[1] */
+	s5p_gpio_set_pull(&gpio1->c0, 1, GPIO_PULL_UP);
+	s5p_gpio_direction_output(&gpio1->c0, 1, 1);
+
+	/* LDO25 VCC_3.1V_LCD */
+	i2c_set_bus_num(I2C_7);
+	pmic_probe(p);
+	max77686_set_ldo_voltage(p, 25, 3100000);
+	max77686_set_ldo_mode(p, 25, OPMODE_LPM);
+}
+
+void exynos_reset_lcd(void)
+{
+	/* reset lcd */
+	s5p_gpio_direction_output(&gpio1->f2, 1, 0);
+	udelay(10);
+	s5p_gpio_set_value(&gpio1->f2, 1, 1);
+}
+
+vidinfo_t panel_info = {
+	.vl_freq	= 60,
+	.vl_col		= 720,
+	.vl_row		= 1280,
+	.vl_width	= 720,
+	.vl_height	= 1280,
+	.vl_clkp	= CONFIG_SYS_HIGH,
+	.vl_hsp		= CONFIG_SYS_LOW,
+	.vl_vsp		= CONFIG_SYS_LOW,
+	.vl_dp		= CONFIG_SYS_LOW,
+	.vl_bpix	= 5,	/* Bits per pixel, 2^5 = 32 */
+
+	/* s6e8ax0 Panel infomation */
+	.vl_hspw	= 5,
+	.vl_hbpd	= 10,
+	.vl_hfpd	= 10,
+
+	.vl_vspw	= 2,
+	.vl_vbpd	= 1,
+	.vl_vfpd	= 13,
+	.vl_cmd_allow_len = 0xf,
+	.mipi_enabled = 1,
+
+	.dual_lcd_enabled = 0,
+
+	.init_delay	= 0,
+	.power_on_delay = 25,
+	.reset_delay	= 0,
+	.interface_mode = FIMD_RGB_INTERFACE,
+};
+
+void init_panel_info(vidinfo_t *vid)
+{
+	vid->logo_on	= 1;
+	vid->resolution	= HD_RESOLUTION;
+	vid->rgb_mode	= MODE_RGB_P;
+
+	vid->power_on_delay = 30;
+
+	mipi_lcd_device.reverse_panel = 1;
+
+#ifdef CONFIG_TIZEN
+	get_tizen_logo_info(vid);
+#endif
+
+	strcpy(dsim_platform_data.lcd_panel_name, mipi_lcd_device.name);
+	dsim_platform_data.mipi_power = mipi_power;
+	dsim_platform_data.phy_enable = set_mipi_phy_ctrl;
+	dsim_platform_data.lcd_panel_info = (void *)vid;
+	exynos_mipi_dsi_register_lcd_device(&mipi_lcd_device);
+
+	s6e8ax0_init();
+
+	exynos_set_dsim_platform_data(&dsim_platform_data);
+}
+#endif /* LCD */
+
+#ifdef CONFIG_MISC_INIT_R
+int misc_init_r(void)
+{
+	setenv("model", "GT-I8800");
+	setenv("board", "TRATS2");
+
+	show_hw_revision();
+
+	return 0;
+}
+#endif
diff --git a/boards.cfg b/boards.cfg
index 31483d6..8816b3f 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -306,6 +306,7 @@ snow			     arm	 armv7	     smdk5250		 samsung	exynos
 smdk5250		     arm	 armv7	     smdk5250		 samsung	exynos
 smdkv310		     arm	 armv7	     smdkv310		 samsung	exynos
 trats                        arm         armv7       trats               samsung        exynos
+trats2                       arm         armv7       trats2              samsung        exynos
 harmony                      arm         armv7:arm720t harmony           nvidia         tegra20
 seaboard                     arm         armv7:arm720t seaboard          nvidia         tegra20
 ventana                      arm         armv7:arm720t ventana           nvidia         tegra20
diff --git a/include/configs/trats2.h b/include/configs/trats2.h
new file mode 100644
index 0000000..b80d7d4
--- /dev/null
+++ b/include/configs/trats2.h
@@ -0,0 +1,326 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ * Sanghee Kim <sh0130.kim@samsung.com>
+ * Piotr Wilczek <p.wilczek@samsung.com>
+ *
+ * Configuation settings for the SAMSUNG EXYNOS4 boards.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_SAMSUNG		/* in a SAMSUNG core */
+#define CONFIG_S5P		/* which is in a S5P Family */
+#define CONFIG_EXYNOS4		/* which is in a EXYNOS4XXX */
+#define CONFIG_TIZEN		/* TIZEN lib */
+
+#define PLATFORM_NO_UNALIGNED
+
+#define CONFIG_SYS_DCACHE_OFF
+
+#include <asm/arch/cpu.h>		/* get chip and board defs */
+
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+
+#define CONFIG_SYS_CACHELINE_SIZE	32
+
+#ifndef CONFIG_SYS_L2CACHE_OFF
+#define CONFIG_SYS_L2_PL310
+#define CONFIG_SYS_PL310_BASE	0x10502000
+#endif
+
+#define CONFIG_NR_DRAM_BANKS	4
+#define PHYS_SDRAM_1		0x40000000	/* LDDDR2 DMC 0 */
+#define PHYS_SDRAM_1_SIZE	(256 << 20)	/* 256 MB in CS 0 */
+#define PHYS_SDRAM_2		0x50000000	/* LPDDR2 DMC 1 */
+#define PHYS_SDRAM_2_SIZE	(256 << 20)	/* 256 MB in CS 0 */
+#define PHYS_SDRAM_3		0x60000000	/* LPDDR2 DMC 1 */
+#define PHYS_SDRAM_3_SIZE	(256 << 20)	/* 256 MB in CS 0 */
+#define PHYS_SDRAM_4		0x70000000	/* LPDDR2 DMC 1 */
+#define PHYS_SDRAM_4_SIZE	(256 << 20)	/* 256 MB in CS 0 */
+#define PHYS_SDRAM_END		0x80000000
+
+#define CONFIG_SYS_MEM_TOP_HIDE		(1 << 20)	/* ram console */
+
+#define CONFIG_SYS_SDRAM_BASE	(PHYS_SDRAM_1)
+#define CONFIG_SYS_TEXT_BASE	0x78100000
+
+#define CONFIG_SYS_CLK_FREQ	24000000
+
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_REVISION_TAG
+
+/* MACH_TYPE_TRATS2 */
+#define MACH_TYPE_TRATS2			3765
+#define CONFIG_MACH_TYPE		MACH_TYPE_TRATS2
+
+#define CONFIG_DISPLAY_CPUINFO
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN	(CONFIG_ENV_SIZE + (2 << 20))
+
+/* select serial console configuration */
+#define CONFIG_SERIAL2
+
+#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser	*/
+#ifdef CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+#endif
+
+#define CONFIG_CMDLINE_EDITING
+
+#define CONFIG_BAUDRATE		115200
+
+/* It should define before config_cmd_default.h */
+#define CONFIG_SYS_NO_FLASH
+
+/***********************************************************
+ * Command definition
+ ***********************************************************/
+#include <config_cmd_default.h>
+
+#undef CONFIG_CMD_ECHO
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_FLASH
+#undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_NAND
+#undef CONFIG_CMD_MISC
+#undef CONFIG_CMD_NFS
+#undef CONFIG_CMD_SOURCE
+#undef CONFIG_CMD_XIMG
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_GPT
+#define CONFIG_CMD_PMIC
+
+#define CONFIG_BOOTDELAY	3
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+
+#define CONFIG_CMD_FAT
+#define CONFIG_FAT_WRITE
+
+/* EXT4 */
+#define CONFIG_CMD_EXT4
+#define CONFIG_CMD_EXT4_WRITE
+
+/* To use the TFTPBOOT over USB, Please enable the CONFIG_CMD_NET */
+#undef CONFIG_CMD_NET
+
+/* MMC */
+#define CONFIG_GENERIC_MMC
+#define CONFIG_MMC
+#define CONFIG_S5P_SDHCI
+#define CONFIG_SDHCI
+#define CONFIG_MMC_SDMA
+#define CONFIG_MMC_DEFAULT_DEV	0
+
+#define FSTYPE_DEFAULT		"ext4"
+
+#define CONFIG_BOOTARGS		"Please use defined boot"
+#define CONFIG_BOOTCOMMAND	"run mmcboot"
+#define CONFIG_DEFAULT_CONSOLE	"console=ttySAC2,115200n8\0"
+
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_SYS_CONSOLE_INFO_QUIET
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+
+/* Tizen - partitions definitions */
+#define PARTS_CSA		"csa-mmc"
+#define PARTS_BOOTLOADER	"u-boot"
+#define PARTS_BOOT		"boot"
+#define PARTS_ROOT		"platform"
+#define PARTS_DATA		"data"
+#define PARTS_CSC		"csc"
+#define PARTS_UMS		"ums"
+
+#define PARTS_DEFAULT \
+	"uuid_disk=${uuid_gpt_disk};" \
+	"name="PARTS_CSA",size=8MiB,uuid=${uuid_gpt_"PARTS_CSA"};" \
+	"name="PARTS_BOOTLOADER",size=60MiB," \
+		"uuid=${uuid_gpt_"PARTS_BOOTLOADER"};" \
+	"name="PARTS_BOOT",size=100MiB,uuid=${uuid_gpt_"PARTS_BOOT"};" \
+	"name="PARTS_ROOT",size=1GiB,uuid=${uuid_gpt_"PARTS_ROOT"};" \
+	"name="PARTS_DATA",size=3GiB,uuid=${uuid_gpt_"PARTS_DATA"};" \
+	"name="PARTS_CSC",size=150MiB,uuid=${uuid_gpt_"PARTS_CSC"};" \
+	"name="PARTS_UMS",size=-,uuid=${uuid_gpt_"PARTS_UMS"}\0" \
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"bootk=" \
+		"run loaduimage; bootm 0x40007FC0\0" \
+	"updatemmc=" \
+		"mmc boot 0 1 1 1; mmc write 0x42008000 0 0x200;" \
+		"mmc boot 0 1 1 0\0" \
+	"updatebackup=" \
+		"mmc boot 0 1 1 2; mmc write 0x42100000 0 0x200;" \
+		" mmc boot 0 1 1 0\0" \
+	"updatebootb=" \
+		"mmc read 0x51000000 0x80 0x200; run updatebackup\0" \
+	"updateuboot=" \
+		"mmc write 0x50000000 0x80 0x400\0" \
+	"updaterestore=" \
+		"mmc boot 0 1 1 2; mmc read 0x50000000 0 0x800;" \
+		"mmc boot 0 1 1 0; run updateuboot\0" \
+	"setupboot=" \
+		"run updatemmc; run updateuboot; run updatebootb\0" \
+		"mmcboot=" \
+		"setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
+		"${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \
+		"run loaduimage; bootm 0x40007FC0\0" \
+	"bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \
+	"boottrace=setenv opts initcall_debug; run bootcmd\0" \
+	"verify=n\0" \
+	"rootfstype=ext4\0" \
+	"console=" CONFIG_DEFAULT_CONSOLE \
+	"kernelname=uImage\0" \
+	"loaduimage=" FSTYPE_DEFAULT "load mmc ${mmcdev}:${mmcbootpart} " \
+		"0x40007FC0 ${kernelname}\0" \
+	"mmcdev=0\0" \
+	"mmcbootpart=2\0" \
+	"mmcrootpart=5\0" \
+	"opts=always_resume=1\0" \
+	"partitions=" PARTS_DEFAULT \
+	"uartpath=ap\0" \
+	"usbpath=ap\0" \
+	"consoleon=set console console=ttySAC2,115200n8; save; reset\0" \
+	"consoleoff=set console console=ram; save; reset\0" \
+	"spladdr=0x40000100\0" \
+	"splsize=0x200\0" \
+	"splfile=falcon.bin\0" \
+	"spl_export=" \
+		   "setexpr spl_imgsize ${splsize} + 8 ;" \
+		   "setenv spl_imgsize 0x${spl_imgsize};" \
+		   "setexpr spl_imgaddr ${spladdr} - 8 ;" \
+		   "setexpr spl_addr_tmp ${spladdr} - 4 ;" \
+		   "mw.b ${spl_imgaddr} 0x00 ${spl_imgsize};run loaduimage;" \
+		   "setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
+		   "${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo};" \
+		   "spl export atags 0x40007FC0;" \
+		   "crc32 ${spladdr} ${splsize} ${spl_imgaddr};" \
+		   "mw.l ${spl_addr_tmp} ${splsize};" \
+		   "ext4write mmc ${mmcdev}:${mmcbootpart}" \
+		   " /${splfile} ${spl_imgaddr} ${spl_imgsize};" \
+		   "setenv spl_imgsize;" \
+		   "setenv spl_imgaddr;" \
+		   "setenv spl_addr_tmp;\0"
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP			/* undef to save memory */
+#define CONFIG_SYS_PROMPT	"Trats2 # "	/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE	384		/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	32		/* max number of command args */
+
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
+
+/* memtest works on */
+#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x5000000)
+#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x4800000)
+
+#define CONFIG_SYS_HZ		1000
+
+/* valid baudrates */
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+#define CONFIG_SYS_MONITOR_BASE	0x00000000
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+
+#define CONFIG_SYS_MONITOR_LEN	(256 << 10)	/* Reserve 2 sectors */
+
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV	CONFIG_MMC_DEFAULT_DEV
+#define CONFIG_ENV_SIZE			4096
+#define CONFIG_ENV_OFFSET		((32 - 4) << 10) /* 32KiB - 4KiB */
+#define CONFIG_EFI_PARTITION
+#define CONFIG_PARTITION_UUIDS
+
+#define CONFIG_MISC_INIT_R
+#define CONFIG_BOARD_EARLY_INIT_F
+
+/* I2C */
+#include <asm/arch/gpio.h>
+
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_INIT_BOARD
+#define CONFIG_SYS_I2C_S3C24X0
+#define CONFIG_SYS_I2C_S3C24X0_SPEED 100000
+#define CONFIG_SYS_I2C_S3C24X0_SLAVE 0
+#define CONFIG_SYS_I2C_SOFT
+#define CONFIG_SYS_I2C_SOFT_SPEED 50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE 0
+#define CONFIG_SOFT_I2C_MULTI_BUS
+#define CONFIG_SOFT_I2C_READ_REPEATED_START
+
+#define CONFIG_SOFT_I2C_I2C8_SCL exynos4x12_gpio_part1_get_nr(f1, 4)
+#define CONFIG_SOFT_I2C_I2C8_SDA exynos4x12_gpio_part1_get_nr(f1, 5)
+#define CONFIG_SOFT_I2C_I2C9_SCL exynos4x12_gpio_part2_get_nr(m2, 1)
+#define CONFIG_SOFT_I2C_I2C9_SDA exynos4x12_gpio_part2_get_nr(m2, 0)
+#define CONFIG_SOFT_I2C_GPIO_SCL get_multi_scl_pin()
+#define CONFIG_SOFT_I2C_GPIO_SDA get_multi_sda_pin()
+#define I2C_SOFT_DECLARATIONS2
+#define CONFIG_SYS_I2C_SOFT_SPEED_2 50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE_2 0
+#define I2C_INIT multi_i2c_init()
+
+/* POWER */
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_MAX77686
+#define CONFIG_POWER_PMIC_MAX77693
+#define CONFIG_POWER_MUIC_MAX77693
+#define CONFIG_POWER_FG_MAX77693
+#define CONFIG_POWER_BATTERY_TRATS2
+
+/* PWM */
+#define CONFIG_PWM
+
+#define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_SYS_LOAD_ADDR \
+				 - GENERATED_GBL_DATA_SIZE)
+
+/* LCD */
+#define CONFIG_EXYNOS_FB
+#define CONFIG_LCD
+#define CONFIG_CMD_BMP
+#define CONFIG_BMP_32BPP
+#define CONFIG_FB_ADDR		0x52504000
+#define CONFIG_S6E8AX0
+#define CONFIG_EXYNOS_MIPI_DSIM
+#define CONFIG_VIDEO_BMP_GZIP
+#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 250 * 4) + (1 << 12))
+
+#endif	/* __CONFIG_H */
-- 
1.7.9.5

[U-Boot] [PATCH v3 11/12] board:VCMA9 switch to ne i2c framework

[Piotr Wilczek]

Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
CC: David M?ller <d.mueller@elsoft.ch>

---
Changes in v3:
- new patch

Changes in v2: None

 include/configs/VCMA9.h |    9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h
index 2b3d59f..5b2139f 100644
--- a/include/configs/VCMA9.h
+++ b/include/configs/VCMA9.h
@@ -89,12 +89,13 @@
  * the MPL VCMA9 is equipped with an ATMEL 24C256 EEPROM at
  * address 0x50 with 16bit addressing
  */
-#define CONFIG_HARD_I2C				/* I2C with hardware support */
-#define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed */
-#define CONFIG_SYS_I2C_SLAVE		0x7F	/* I2C slave addr */
+#define CONFIG_SYS_I2C
 
 /* we use the built-in I2C controller */
-#define CONFIG_DRIVER_S3C24X0_I2C
+#define CONFIG_SYS_I2C_S3C24X0
+#define CONFIG_SYS_I2C_S3C24X0_SPEED    100000	/* I2C speed */
+#define CONFIG_SYS_I2C_S3C24X0_SLAVE    0x7F	/* I2C slave addr */
+
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
-- 
1.7.9.5

[U-Boot] [PATCH v3 12/12] board:smdk5250: switch to new i2c framework

[Piotr Wilczek]

Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
CC: Chander Kashyap <k.chander@samsung.com>

---
Changes in v3:
- new patch

Changes in v2: None

 board/samsung/smdk5250/smdk5250.c |    2 +-
 include/configs/exynos5250-dt.h   |    8 ++++----
 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/board/samsung/smdk5250/smdk5250.c b/board/samsung/smdk5250/smdk5250.c
index 8b09e1d..4ceab3e 100644
--- a/board/samsung/smdk5250/smdk5250.c
+++ b/board/samsung/smdk5250/smdk5250.c
@@ -161,7 +161,7 @@ int power_init_board(void)
 
 	set_ps_hold_ctrl();
 
-	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+	i2c_init(CONFIG_SYS_I2C_S3C24X0_SPEED, CONFIG_SYS_I2C_S3C24X0_SLAVE);
 
 	if (pmic_init(I2C_PMIC))
 		return -1;
diff --git a/include/configs/exynos5250-dt.h b/include/configs/exynos5250-dt.h
index 4514e7a..5794886 100644
--- a/include/configs/exynos5250-dt.h
+++ b/include/configs/exynos5250-dt.h
@@ -232,13 +232,13 @@
 
 /* I2C */
 #define CONFIG_SYS_I2C_INIT_BOARD
-#define CONFIG_HARD_I2C
+#define CONFIG_SYS_I2C
 #define CONFIG_CMD_I2C
-#define CONFIG_SYS_I2C_SPEED	100000		/* 100 Kbps */
-#define CONFIG_DRIVER_S3C24X0_I2C
+#define CONFIG_SYS_I2C_S3C24X0_SPEED	100000		/* 100 Kbps */
+#define CONFIG_SYS_I2C_S3C24X0
 #define CONFIG_I2C_MULTI_BUS
 #define CONFIG_MAX_I2C_NUM	8
-#define CONFIG_SYS_I2C_SLAVE    0x0
+#define CONFIG_SYS_I2C_S3C24X0_SLAVE    0x0
 #define CONFIG_I2C_EDID
 
 /* PMIC */
-- 
1.7.9.5

[U-Boot] [PATCH v3 0/12] Introduce Samsung's new board Trats2

[Minkyu Kang]

Dear Piotr Wilczek,

On 17/05/13 21:55, Piotr Wilczek wrote:
> This patchset add support for a new Samsung board Trats2.
> The board use now new i2c framework.
> Support for new multi function pmic max77693 is added.
> 
> This patchset depends on:
>     commit: 8faefadb7305b95d02df38bd2ea61429d59483e5
>     Author: Marc Dietrich <marvin24@gmx.de>  2013-03-29 08:57:10
>     disk: fix unaligned access in efi partitions
> 
> Changes in v3:
> - I2C_GET_BUS replaced by i2c_get_bus_num() function
> - use i2c_set_bus_num() instead I2C_SET_BUS maro
> That macro should be completly replaced when all i2c drivers
>  are adapted to new i2c framework
> - add Maintainer entry
> - changed T-flash detect pin to GPX3[3]
> - removed MMC_ASYNC
> - swiched to new i2c framework, use hardware and soft i2c
> - adapted s3c24x0 i2c driver to new i2c framework
> 
> Changes in v2:
> - changed printf to debug
> - removed lcd callback in panel_info
> - changed i2c from hardware to software
> - use max77693 multifunction pmic
> 
> Piotr Wilczek (12):
>   pmic:max77686: add function to set voltage and mode
>   drivers:power:max77693: add support for new multi function pmic
>     max77693
>   arm:exynos:gpio: fix s5p_gpio_part_max for exynos4x12
>   i2c:multi_i2c: adapt file to new i2c framework
>   power: fix pmic command
>   drivers:power:power_i2c: adapt file to new i2c framework
>   driver:i2c:s3c24x0: adapt driver to new i2c framework
>   drivers:video:s6e8ax0: change data_to_send array to static
>   drivers:lcd: fix unaligned access on lcd
>   samsung: trats2: add support for new board Trats2
>   board:VCMA9 switch to ne i2c framework
>   board:smdk5250: switch to new i2c framework
> 
>  MAINTAINERS                             |    4 +
>  Makefile                                |    1 +
>  arch/arm/include/asm/arch-exynos/gpio.h |   17 +-
>  board/samsung/common/multi_i2c.c        |   37 ++-
>  board/samsung/smdk5250/smdk5250.c       |    2 +-
>  board/samsung/trats2/Makefile           |   50 +++
>  board/samsung/trats2/trats2.c           |  533 +++++++++++++++++++++++++++++++
>  boards.cfg                              |    1 +
>  common/lcd.c                            |   12 +-
>  drivers/i2c/Makefile                    |    2 +-
>  drivers/i2c/s3c24x0_i2c.c               |  100 +++---
>  drivers/power/battery/Makefile          |    1 +
>  drivers/power/battery/bat_trats2.c      |   81 +++++
>  drivers/power/mfd/Makefile              |   49 +++
>  drivers/power/mfd/fg_max77693.c         |  143 +++++++++
>  drivers/power/mfd/muic_max77693.c       |   91 ++++++
>  drivers/power/mfd/pmic_max77693.c       |  110 +++++++
>  drivers/power/pmic/pmic_max77686.c      |  186 +++++++++++
>  drivers/power/power_core.c              |    8 +
>  drivers/power/power_i2c.c               |    6 +
>  drivers/video/s6e8ax0.c                 |   26 +-
>  include/configs/VCMA9.h                 |    9 +-
>  include/configs/exynos5250-dt.h         |    8 +-
>  include/configs/trats2.h                |  326 +++++++++++++++++++
>  include/power/max77686_pmic.h           |   11 +
>  include/power/max77693_fg.h             |   65 ++++
>  include/power/max77693_muic.h           |   90 ++++++
>  include/power/max77693_pmic.h           |   56 ++++
>  28 files changed, 1949 insertions(+), 76 deletions(-)
>  create mode 100644 board/samsung/trats2/Makefile
>  create mode 100644 board/samsung/trats2/trats2.c
>  create mode 100644 drivers/power/battery/bat_trats2.c
>  create mode 100644 drivers/power/mfd/Makefile
>  create mode 100644 drivers/power/mfd/fg_max77693.c
>  create mode 100644 drivers/power/mfd/muic_max77693.c
>  create mode 100644 drivers/power/mfd/pmic_max77693.c
>  create mode 100644 include/configs/trats2.h
>  create mode 100644 include/power/max77693_fg.h
>  create mode 100644 include/power/max77693_muic.h
>  create mode 100644 include/power/max77693_pmic.h

This patchset doesn't match with subject of patchset.
Why this patchset contain many other subjects in it?
I think GPIO, I2C, LCD, Power.. are not related with supporting the trats2.
Please split them.

Thanks,
Minkyu Kang.

[U-Boot] [PATCH v3 0/12] Introduce Samsung's new board Trats2

[Piotr Wilczek]

Dear Minkyu Kang,

> -----Original Message-----
> From: Minkyu Kang [mailto:mk7.kang at samsung.com]
> Sent: Tuesday, May 21, 2013 10:36 AM
> To: Piotr Wilczek
> Cc: u-boot at lists.denx.de; Kyungmin Park; Lukasz Majewski
> Subject: Re: [PATCH v3 0/12] Introduce Samsung's new board Trats2
> 
> Dear Piotr Wilczek,
> 
> On 17/05/13 21:55, Piotr Wilczek wrote:
> > This patchset add support for a new Samsung board Trats2.
> > The board use now new i2c framework.
> > Support for new multi function pmic max77693 is added.
> >
> > This patchset depends on:
> >     commit: 8faefadb7305b95d02df38bd2ea61429d59483e5
> >     Author: Marc Dietrich <marvin24@gmx.de>  2013-03-29 08:57:10
> >     disk: fix unaligned access in efi partitions
> >
> > Changes in v3:
> > - I2C_GET_BUS replaced by i2c_get_bus_num() function
> > - use i2c_set_bus_num() instead I2C_SET_BUS maro That macro should be
> > completly replaced when all i2c drivers  are adapted to new i2c
> > framework
> > - add Maintainer entry
> > - changed T-flash detect pin to GPX3[3]
> > - removed MMC_ASYNC
> > - swiched to new i2c framework, use hardware and soft i2c
> > - adapted s3c24x0 i2c driver to new i2c framework
> >
> > Changes in v2:
> > - changed printf to debug
> > - removed lcd callback in panel_info
> > - changed i2c from hardware to software
> > - use max77693 multifunction pmic
> >
> > Piotr Wilczek (12):
> >   pmic:max77686: add function to set voltage and mode
> >   drivers:power:max77693: add support for new multi function pmic
> >     max77693
> >   arm:exynos:gpio: fix s5p_gpio_part_max for exynos4x12
> >   i2c:multi_i2c: adapt file to new i2c framework
> >   power: fix pmic command
> >   drivers:power:power_i2c: adapt file to new i2c framework
> >   driver:i2c:s3c24x0: adapt driver to new i2c framework
> >   drivers:video:s6e8ax0: change data_to_send array to static
> >   drivers:lcd: fix unaligned access on lcd
> >   samsung: trats2: add support for new board Trats2
> >   board:VCMA9 switch to ne i2c framework
> >   board:smdk5250: switch to new i2c framework
> >
> >  MAINTAINERS                             |    4 +
> >  Makefile                                |    1 +
> >  arch/arm/include/asm/arch-exynos/gpio.h |   17 +-
> >  board/samsung/common/multi_i2c.c        |   37 ++-
> >  board/samsung/smdk5250/smdk5250.c       |    2 +-
> >  board/samsung/trats2/Makefile           |   50 +++
> >  board/samsung/trats2/trats2.c           |  533
> +++++++++++++++++++++++++++++++
> >  boards.cfg                              |    1 +
> >  common/lcd.c                            |   12 +-
> >  drivers/i2c/Makefile                    |    2 +-
> >  drivers/i2c/s3c24x0_i2c.c               |  100 +++---
> >  drivers/power/battery/Makefile          |    1 +
> >  drivers/power/battery/bat_trats2.c      |   81 +++++
> >  drivers/power/mfd/Makefile              |   49 +++
> >  drivers/power/mfd/fg_max77693.c         |  143 +++++++++
> >  drivers/power/mfd/muic_max77693.c       |   91 ++++++
> >  drivers/power/mfd/pmic_max77693.c       |  110 +++++++
> >  drivers/power/pmic/pmic_max77686.c      |  186 +++++++++++
> >  drivers/power/power_core.c              |    8 +
> >  drivers/power/power_i2c.c               |    6 +
> >  drivers/video/s6e8ax0.c                 |   26 +-
> >  include/configs/VCMA9.h                 |    9 +-
> >  include/configs/exynos5250-dt.h         |    8 +-
> >  include/configs/trats2.h                |  326 +++++++++++++++++++
> >  include/power/max77686_pmic.h           |   11 +
> >  include/power/max77693_fg.h             |   65 ++++
> >  include/power/max77693_muic.h           |   90 ++++++
> >  include/power/max77693_pmic.h           |   56 ++++
> >  28 files changed, 1949 insertions(+), 76 deletions(-)  create mode
> > 100644 board/samsung/trats2/Makefile  create mode 100644
> > board/samsung/trats2/trats2.c  create mode 100644
> > drivers/power/battery/bat_trats2.c
> >  create mode 100644 drivers/power/mfd/Makefile  create mode 100644
> > drivers/power/mfd/fg_max77693.c  create mode 100644
> > drivers/power/mfd/muic_max77693.c  create mode 100644
> > drivers/power/mfd/pmic_max77693.c  create mode 100644
> > include/configs/trats2.h  create mode 100644
> > include/power/max77693_fg.h  create mode 100644
> > include/power/max77693_muic.h  create mode 100644
> > include/power/max77693_pmic.h
> 
> This patchset doesn't match with subject of patchset.
> Why this patchset contain many other subjects in it?
> I think GPIO, I2C, LCD, Power.. are not related with supporting the
> trats2.
> Please split them.
> 
Ok, I will split this patchset.

> Thanks,
> Minkyu Kang.

Best regards,
Piotr Wilczek