From: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
To: Rich Felker <dalias@libc.org>
Cc: Christoph Hellwig <hch@lst.de>,
Yoshinori Sato <ysato@users.sourceforge.jp>,
linux-sh@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: ioremap and dma cleanups and fixes for superh (2nd resend)
Date: Tue, 14 Jul 2020 23:12:33 +0000 [thread overview]
Message-ID: <011f29e6-ad71-366e-dbff-bc8471f3da60@physik.fu-berlin.de> (raw)
In-Reply-To: <8cbf2963-d0e4-0ca8-4ffe-c2057694447f@physik.fu-berlin.de>
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="windows-1254", Size: 32739 bytes --]
Hello!
I have applied Christoph's full series on top of Linus' tree and I can confirm that
the kernel boots fine on my SH-7785LCR board.
Thus, for the whole series of patches:
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
However, independent of Christoph's series, the kernels throws two backtraces during
boot which I think should require a git bisect (unless I missed a configuration option
as I trimmed down the kernel a bit to make sure it's not too big).
See the traces below and let me know what you think.
Adrian
==========================================
## Booting kernel from Legacy Image at 89000000 ...
Image Name: Linux-5.8.0-rc5-00026-g22b7a96ec
Image Type: SuperH Linux Kernel Image (gzip compressed)
Data Size: 4058011 Bytes = 3.9 MiB
Load Address: 80001000
Entry Point: 80002000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
[ 0.000000] Linux version 5.8.0-rc5-00026-g22b7a96ece82 (glaubitz@epyc) (sh4-linux-gnu-gcc (Debian 9.3.0-13) 9.3.0, GNU ld (GNU Binutils for Debian) 2.34.90.20200706) #3 PREEMPT Wed Jul 15 01:03:46 CEST 2020
[ 0.000000] Boot params:
[ 0.000000] ... MOUNT_ROOT_RDONLY - 00000000
[ 0.000000] ... RAMDISK_FLAGS - 00000000
[ 0.000000] ... ORIG_ROOT_DEV - 00000000
[ 0.000000] ... LOADER_TYPE - 00000000
[ 0.000000] ... INITRD_START - 00000000
[ 0.000000] ... INITRD_SIZE - 00000000
[ 0.000000] Booting machvec: SH7785LCR
[ 0.000000] PMB: boot mappings:
[ 0.000000] 0x00080000 -> 0x00040000 [ 512MB cached ]
[ 0.000000] 0x000a0000 -> 0x00040000 [ 16MB uncached ]
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000040000000-0x000000005fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000040000000-0x000000005fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000005fffffff]
[ 0.000000] On node 0 totalpages: 131072
[ 0.000000] Normal zone: 1024 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 131072 pages, LIFO batch:31
[ 0.000000] Renesas Technology Corp. R0P7785LC0011RL support.
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048
[ 0.000000] Kernel command line: console=ttySC1,115200 root=/dev/sda1 init=/bin/bash
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[ 0.000000] Sorting __ex_table...
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] PVR\x10300700 CVRq440211 PRR\0000250
[ 0.000000] I-cache : n_ways=4 n_sets%6 way_incr92
[ 0.000000] I-cache : entry_mask=0x00001fe0 alias_mask=0x00001000 n_aliases=2
[ 0.000000] D-cache : n_ways=4 n_sets%6 way_incr92
[ 0.000000] D-cache : entry_mask=0x00001fe0 alias_mask=0x00001000 n_aliases=2
[ 0.000000] Memory: 510080K/524288K available (4601K kernel code, 276K rwdata, 1660K rodata, 156K init, 2966K bss, 14204K reserved, 0K cma-reserved)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xdffd7000 - 0xdffff000 ( 160 kB)
[ 0.000000] vmalloc : 0xc0000000 - 0xdffd5000 ( 511 MB)
[ 0.000000] lowmem : 0x80000000 - 0xa0000000 ( 512 MB) (cached)
[ 0.000000] : 0xa0000000 - 0xa1000000 ( 16 MB) (uncached)
[ 0.000000] .init : 0x80666000 - 0x8068d000 ( 156 kB)
[ 0.000000] .data : 0x80480594 - 0x806658d0 (1940 kB)
[ 0.000000] .text : 0x80001000 - 0x80480594 (4605 kB)
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] NR_IRQS: 8, nr_irqs: 8, preallocated irqs: 0
[ 0.000000] intc: Registered controller 'sh7785' with 67 IRQs
[ 0.000000] intc: Registered controller 'sh7785-irq4567' with 4 IRQs
[ 0.000000] intc: Registered controller 'sh7785-irq0123' with 4 IRQs
[ 0.000000] random: get_random_bytes called from start_kernel+0x264/0x5c2 with crng_init=0
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] sh-tmu.0: ch0: used for clock events
[ 0.000000] sh-tmu.0: ch0: used for periodic clock events
[ 0.000000] sh-tmu.0: ch1: used as clock source
[ 0.000000] clocksource: sh-tmu.0: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 152900847964 ns
[ 0.000000] sh-tmu.1: ch0: used for clock events
[ 0.000000] sh-tmu.1: ch1: used as clock source
[ 0.000000] clocksource: sh-tmu.1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 152900847964 ns
[ 0.000000] sched_clock: 32 bits at 250 Hz, resolution 4000000ns, wraps every 8589934590000000ns
[ 0.000000] Calibrating delay loop (skipped)... 599.99 BogoMIPS PRESET (lpj\x1199999)
[ 0.000000] pid_max: default: 32768 minimum: 301
[ 0.000000] LSM: Security Framework initializing
[ 0.000000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.000000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.012000] CPU: SH7785
[ 0.016000] Performance Events: sh4a support registered
[ 0.020000] rcu: Hierarchical SRCU implementation.
[ 0.024000] devtmpfs: initialized
[ 0.044000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.044000] futex hash table entries: 256 (order: 0, 7168 bytes, linear)
[ 0.048000] pinctrl core: initialized pinctrl subsystem
[ 0.060000] NET: Registered protocol family 16
[ 0.140000] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
[ 0.144000] audit: initializing netlink subsys (disabled)
[ 0.148000] audit: type 00 audit(0.144:1): state=initialized audit_enabled=0 res=1
[ 0.168000] cpuidle: using governor ladder
[ 0.168000] cpuidle: using governor menu
[ 0.228000] sh-pfc pfc-sh7785: sh7785_pfc handling gpio 0 -> 110
[ 0.232000] sh-pfc pfc-sh7785: sh7785_pfc handling gpio 111 -> 275
[ 0.232000] sh-pfc pfc-sh7785: sh7785_pfc support registered
[ 0.232000] HW Breakpoints: SH-4A UBC support registered
[ 0.232000] PCI: Starting initialization.
[ 0.484000] PCI: Found a Renesas SH7785 host controller, revision 1.
[ 0.484000] PCI: Checking 66MHz capabilities...
[ 0.484000] PCI: Running at 66MHz.
[ 0.932000] HugeTLB registered 1.00 MiB page size, pre-allocated 0 pages
[ 0.980000] SCSI subsystem initialized
[ 0.988000] libata version 3.00 loaded.
[ 1.004000] usbcore: registered new interface driver usbfs
[ 1.004000] usbcore: registered new interface driver hub
[ 1.008000] usbcore: registered new device driver usb
[ 1.016000] sh_tmu sh-tmu.0: kept as earlytimer
[ 1.020000] sh_tmu sh-tmu.1: kept as earlytimer
[ 1.024000] random: fast init done
[ 1.048000] DMA: Registering sh_dmac handler (12 channels).
[ 1.096000] DMA: Registering DMA API.
[ 1.100000] PCI host bridge to bus 0000:00
[ 1.100000] pci_bus 0000:00: root bus resource [io 0x1000-0x3fffff]
[ 1.100000] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfdffffff]
[ 1.100000] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
[ 1.100000] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
[ 1.104000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 1.104000] pci_bus 0000:00: scanning bus
[ 1.104000] pci 0000:00:00.0: [10ec:8169] type 00 class 0x020000
[ 1.104000] pci 0000:00:00.0: reg 0x10: [io 0x0000-0x00ff]
[ 1.104000] pci 0000:00:00.0: reg 0x14: [mem 0x00000000-0x000000ff]
[ 1.104000] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 1.104000] pci 0000:00:00.0: supports D1 D2
[ 1.104000] pci 0000:00:00.0: PME# supported from D1 D2 D3hot
[ 1.104000] pci 0000:00:00.0: PME# disabled
[ 1.108000] pci 0000:00:01.0: [1095:3512] type 00 class 0x018000
[ 1.108000] pci 0000:00:01.0: reg 0x10: [io 0x0000-0x0007]
[ 1.108000] pci 0000:00:01.0: reg 0x14: [io 0x0000-0x0003]
[ 1.108000] pci 0000:00:01.0: reg 0x18: [io 0x0000-0x0007]
[ 1.108000] pci 0000:00:01.0: reg 0x1c: [io 0x0000-0x0003]
[ 1.108000] pci 0000:00:01.0: reg 0x20: [io 0x0000-0x000f]
[ 1.108000] pci 0000:00:01.0: reg 0x24: [mem 0x00000000-0x000001ff]
[ 1.108000] pci 0000:00:01.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
[ 1.108000] pci 0000:00:01.0: supports D1 D2
[ 1.116000] pci_bus 0000:00: fixups for bus
[ 1.116000] pci_bus 0000:00: bus scan returning with max\0
[ 1.116000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[ 1.116000] pci 0000:00:01.0: BAR 6: assigned [mem 0xfd000000-0xfd07ffff pref]
[ 1.116000] pci 0000:00:00.0: BAR 6: assigned [mem 0xfd080000-0xfd09ffff pref]
[ 1.116000] pci 0000:00:01.0: BAR 5: assigned [mem 0xfd0a0000-0xfd0a01ff]
[ 1.116000] pci 0000:00:00.0: BAR 0: assigned [io 0x1000-0x10ff]
[ 1.116000] pci 0000:00:00.0: BAR 1: assigned [mem 0xfd0a0200-0xfd0a02ff]
[ 1.116000] pci 0000:00:01.0: BAR 4: assigned [io 0x1400-0x140f]
[ 1.116000] pci 0000:00:01.0: BAR 0: assigned [io 0x1410-0x1417]
[ 1.116000] pci 0000:00:01.0: BAR 2: assigned [io 0x1418-0x141f]
[ 1.116000] pci 0000:00:01.0: BAR 1: assigned [io 0x1420-0x1423]
[ 1.116000] pci 0000:00:01.0: BAR 3: assigned [io 0x1424-0x1427]
[ 1.120000] clocksource: Switched to clocksource sh-tmu.0
[ 1.124000] sh_tmu sh-tmu.0: ch0: used for oneshot clock events
[ 1.456000] NET: Registered protocol family 2
[ 1.464000] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 6144 bytes, linear)
[ 1.464000] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
[ 1.464000] TCP bind hash table entries: 4096 (order: 4, 81920 bytes, linear)
[ 1.464000] TCP: Hash tables configured (established 4096 bind 4096)
[ 1.464000] UDP hash table entries: 256 (order: 1, 12288 bytes, linear)
[ 1.464000] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes, linear)
[ 1.468000] NET: Registered protocol family 1
[ 1.468000] PCI: CLS 0 bytes, default 32
[ 1.468000] sq: Registering store queue API.
[ 1.512000] workingset: timestamp_bits0 max_order\x17 bucket_order=0
[ 1.536000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 1.536000] io scheduler mq-deadline registered
[ 1.544000] SuperH (H)SCI(F) driver initialized
[ 1.544000] sh-sci.0: ttySC0 at MMIO 0xffea0000 (irq = 40, base_baud = 0) is a scif
[ 1.560000] sh-sci.1: ttySC1 at MMIO 0xffeb0000 (irq = 44, base_baud = 0) is a scif
[ 1.560000] BUG: spinlock bad magic on CPU#0, swapper/1
[ 1.560000] lock: sci_ports+0x1d8/0xb10, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0
[ 1.560000] CPU: 0 PID: 1 Comm: swapper Not tainted 5.8.0-rc5-00026-g22b7a96ece82 #3
[ 1.560000] Stack: (0x9f445ce8 to 0x9f446000)
[ 1.560000] 5ce0:
[ 1.560000]
[ 1.560000]
[ 1.560000] 80260daa
[ 1.560000] 9f445cfc
[ 1.560000] 80048fd8
[ 1.560000] 8096c158
[ 1.560000] 805ab908
[ 1.560000] 8004449c
[ 1.560000]
[ 1.560000] 5d00:
[ 1.560000] 9f445d08
[ 1.560000] 00000000
[ 1.560000] ffffffff
[ 1.560000] 00000000
[ 1.560000] 8004455e
[ 1.560000] 9f445d24
[ 1.560000] 8064b2c0
[ 1.560000] 8096c158
[ 1.560000]
[ 1.560000] 5d20:
[ 1.560000] 8096c158
[ 1.560000] 8047e57c
[ 1.560000] 9f445d30
[ 1.560000] 00000000
[ 1.560000] 802b850a
[ 1.560000] 9f445d40
[ 1.560000] 8096c158
[ 1.560000] 9f66694c
[ 1.560000]
[ 1.560000] 5d40:
[ 1.560000] 9f445d70
[ 1.560000] 0000002c
[ 1.560000] 00000000
[ 1.560000] 805cc1a0
[ 1.560000] 9f4d7660
[ 1.560000] 9f666a88
[ 1.560000] 805e101c
[ 1.560000] 0000002c
[ 1.560000]
[ 1.560000] 5d60:
[ 1.560000] 9f647d80
[ 1.560000] 9f445d70
[ 1.560000] 00000000
[ 1.560000] 9f666a48
[ 1.560000] 4f494d4d
[ 1.560000] 66783020
[ 1.560000] 30626566
[ 1.560000] 00303030
[ 1.560000]
[ 1.560000] 5d80:
[ 1.560000] 9f445d9c
[ 1.560000] 00000000
[ 1.560000] 8096bf7c
[ 1.560000] 8062deb4
[ 1.560000] 8096bf80
[ 1.560000] 8096c158
[ 1.560000] 8096c158
[ 1.560000] 8096c214
[ 1.560000]
[ 1.560000] 5da0:
[ 1.560000] 9f445db0
[ 1.560000] 805cc298
[ 1.560000] 805cc29c
[ 1.560000] 00000000
[ 1.560000] b6b1ed6c
[ 1.560000] 802bc842
[ 1.560000] 9f445dd4
[ 1.560000] 00000000
[ 1.560000]
[ 1.560000] 5dc0:
[ 1.560000] 8096bf7c
[ 1.560000] 8096c158
[ 1.560000] 8096bf80
[ 1.560000] 8096c158
[ 1.560000] 00000001
[ 1.560000] 00000000
[ 1.560000] 9f4d81c8
[ 1.560000] 805e5c0c
[ 1.560000]
[ 1.560000] 5de0:
[ 1.560000] 8062dec0
[ 1.560000] 8062e050
[ 1.560000] 802c9890
[ 1.560000] 9f445e08
[ 1.560000] 00000000
[ 1.560000] 8096cd10
[ 1.560000] 8062df3c
[ 1.560000] 8096ce20
[ 1.560000]
[ 1.560000] 5e00:
[ 1.560000] 8062dec0
[ 1.560000] 8064b1b4
[ 1.560000] 802c7cdc
[ 1.560000] 9f445e18
[ 1.560000] 8062dec0
[ 1.560000] 00000000
[ 1.560000] 00000000
[ 1.560000] 8064b1b4
[ 1.560000]
[ 1.560000] 5e20:
[ 1.560000] 802c7fe6
[ 1.560000] 9f445e40
[ 1.560000] 8064b1f4
[ 1.560000] 8064bb08
[ 1.560000] 8062724c
[ 1.560000] 00000000
[ 1.560000] 8064b1b4
[ 1.560000] 8062dec0
[ 1.560000]
[ 1.560000] 5e40:
[ 1.560000] 802c81ce
[ 1.560000] 9f445e54
[ 1.560000] 00000000
[ 1.560000] 8064b1b4
[ 1.560000] 8062dec0
[ 1.560000] 802c8220
[ 1.560000] 9f445e68
[ 1.560000] 802627f4
[ 1.560000]
[ 1.560000] 5e60:
[ 1.560000] 8062dec0
[ 1.560000] 8064b1b4
[ 1.560000] 802c619a
[ 1.560000] 9f445e7c
[ 1.560000] 802627f4
[ 1.560000] 802c81e0
[ 1.560000] 8064b1b4
[ 1.560000] 8047e4e0
[ 1.560000]
[ 1.560000] 5e80:
[ 1.560000] 9f40bc70
[ 1.560000] 9f40f5c0
[ 1.560000] b6b1ed6c
[ 1.560000] 802c778a
[ 1.560000] 9f445ea4
[ 1.560000] 8064bac8
[ 1.560000] 00000000
[ 1.560000] 9f664f60
[ 1.560000]
[ 1.560000] 5ea0:
[ 1.560000] 8064b1b4
[ 1.560000] 802c71d2
[ 1.560000] 9f445eac
[ 1.560000] 805a0d88
[ 1.560000] 802c87cc
[ 1.560000] 9f445ed0
[ 1.560000] 8068d000
[ 1.560000] 00000000
[ 1.560000]
[ 1.560000] 5ec0:
[ 1.560000] 8062724c
[ 1.560000] 9f445efc
[ 1.560000] 8068d008
[ 1.560000] 8064b1b4
[ 1.560000] 802c9856
[ 1.560000] 9f445ee4
[ 1.560000] 9f445efc
[ 1.560000] 8068d008
[ 1.560000]
[ 1.560000] 5ee0:
[ 1.560000] 80678800
[ 1.560000] 80678816
[ 1.560000] 9f445eec
[ 1.560000] 80002292
[ 1.560000] 9f445ef4
[ 1.560000] 9f422dd6
[ 1.560000] 00000000
[ 1.560000] 8002d300
[ 1.560000]
[ 1.560000] 5f00:
[ 1.560000] 9f445f0c
[ 1.560000] 000000b2
[ 1.560000] 9f445f0c
[ 1.560000] 00000006
[ 1.560000] 00000006
[ 1.560000] 00000000
[ 1.560000] 805dda74
[ 1.560000] 8061f9f0
[ 1.560000]
[ 1.560000] 5f20:
[ 1.560000] 80666098
[ 1.560000] 00000000
[ 1.560000] 9f422dea
[ 1.560000] 00000000
[ 1.560000] 9f422de5
[ 1.560000] 9f422dea
[ 1.560000] b6b1ed6c
[ 1.560000] 80666c92
[ 1.560000]
[ 1.560000] 5f40:
[ 1.560000] 9f445f5c
[ 1.560000] 000000b2
[ 1.560000] 80685900
[ 1.560000] 9f422dc0
[ 1.560000] 806858e0
[ 1.560000] 8068d008
[ 1.560000] 8061f9f0
[ 1.560000] 00000006
[ 1.560000]
[ 1.560000] 5f60:
[ 1.560000] 00000006
[ 1.560000] 00000000
[ 1.560000] 80666098
[ 1.560000] 8068a6d0
[ 1.560000] 00000007
[ 1.560000] 804778b4
[ 1.560000] 9f445f94
[ 1.560000] 80636160
[ 1.560000]
[ 1.560000] 5f80:
[ 1.560000] 80477788
[ 1.560000] 8063659c
[ 1.560000] 00000000
[ 1.560000] 9f442020
[ 1.560000] 80048fd8
[ 1.560000] 80007224
[ 1.560000] 9f449f28
[ 1.560000] 9f442020
[ 1.560000]
[ 1.560000] 5fa0:
[ 1.560000] 80034b98
[ 1.560000] 00000000
[ 1.560000] 00000000
[ 1.560000] 00000000
[ 1.560000] 00000000
[ 1.560000] 00000000
[ 1.560000] 804778a4
[ 1.560000] 00000000
[ 1.560000]
[ 1.560000] 5fc0:
[ 1.560000] 00000000
[ 1.560000] 00000000
[ 1.560000] 00000000
[ 1.560000] 00000000
[ 1.560000] 00000000
[ 1.560000] 00000000
[ 1.560000] 00000000
[ 1.560000] 00000000
[ 1.560000]
[ 1.560000] 5fe0:
[ 1.560000] 00000000
[ 1.560000] 00000000
[ 1.560000] 00000000
[ 1.560000] 40008000
[ 1.560000] 00000000
[ 1.560000] 00000000
[ 1.560000] 00000000
[ 1.560000] 00000000
[ 1.560000]
[ 1.560000]
[ 1.560000] Call trace:
[ 1.560000] [<(ptrval)>] dump_stack+0x1a/0x30
[ 1.560000] [<(ptrval)>] printk+0x0/0x50
[ 1.560000] [<(ptrval)>] spin_dump+0x58/0x88
[ 1.560000] [<(ptrval)>] do_raw_spin_lock+0x4a/0x94
[ 1.560000] [<(ptrval)>] _raw_spin_lock_irqsave+0x24/0x44
[ 1.560000] [<(ptrval)>] uart_add_one_port+0x32a/0x470
[ 1.560000] [<(ptrval)>] sci_probe+0x116/0x2f4
[ 1.560000] [<(ptrval)>] platform_drv_probe+0x1c/0x60
[ 1.560000] [<(ptrval)>] really_probe+0xc0/0x2c8
[ 1.560000] [<(ptrval)>] driver_probe_device+0x26/0x6c
[ 1.560000] [<(ptrval)>] device_driver_attach+0x4a/0x5c
[ 1.560000] [<(ptrval)>] __driver_attach+0x40/0xc4
[ 1.560000] [<(ptrval)>] klist_next+0x0/0xe4
[ 1.560000] [<(ptrval)>] bus_for_each_dev+0x56/0xa8
[ 1.560000] [<(ptrval)>] klist_next+0x0/0xe4
[ 1.560000] [<(ptrval)>] __driver_attach+0x0/0xc4
[ 1.560000] [<(ptrval)>] _raw_spin_lock+0x10/0x28
[ 1.560000] [<(ptrval)>] driver_attach+0x12/0x24
[ 1.560000] [<(ptrval)>] bus_add_driver+0x13a/0x1bc
[ 1.560000] [<(ptrval)>] driver_register+0x50/0xf8
[ 1.560000] [<(ptrval)>] __platform_driver_register+0x22/0x40
[ 1.560000] [<(ptrval)>] sci_init+0x0/0x34
[ 1.560000] [<(ptrval)>] sci_init+0x16/0x34
[ 1.560000] [<(ptrval)>] do_one_initcall+0x5e/0x164
[ 1.560000] [<(ptrval)>] parse_args+0xe0/0x2b8
[ 1.560000] [<(ptrval)>] ignore_unknown_bootoption+0x0/0xc
[ 1.560000] [<(ptrval)>] kernel_init_freeable+0xf6/0x1e0
[ 1.560000] [<(ptrval)>] ignore_unknown_bootoption+0x0/0xc
[ 1.560000] [<(ptrval)>] kernel_init+0x10/0x100
[ 1.560000] [<(ptrval)>] debug_smp_processor_id+0x0/0x24
[ 1.560000] [<(ptrval)>] printk+0x0/0x50
[ 1.560000] [<(ptrval)>] ret_from_kernel_thread+0xc/0x14
[ 1.560000] [<(ptrval)>] schedule_tail+0x0/0x88
[ 1.560000] [<(ptrval)>] kernel_init+0x0/0x100
[ 1.560000]
[ 3.248000] printk: console [ttySC1] enabled
[ 3.264000] sh-sci.2: ttySC2 at MMIO 0xffec0000 (irq = 60, base_baud = 0) is a scif
[ 3.284000] sh-sci.3: ttySC3 at MMIO 0xffed0000 (irq = 61, base_baud = 0) is a scif
[ 3.304000] sh-sci.4: ttySC4 at MMIO 0xffee0000 (irq = 62, base_baud = 0) is a scif
[ 3.324000] sh-sci.5: ttySC5 at MMIO 0xffef0000 (irq = 63, base_baud = 0) is a scif
[ 3.628000] brd: module loaded
[ 3.816000] loop: module loaded
[ 3.820000] sm501 sm501: SM501 At (ptrval): Version 050100c0, 4 Mb, IRQ 10
[ 3.828000] sm501 sm501: setting M1XCLK to 112000000
[ 3.856000] sm501 sm501: setting MCLK to 84000000
[ 3.884000] sm501-fb[0] [mem 0x13e80000-0x13e8ffff]
[ 3.888000] sm501-fb[1] [mem 0x13f00000-0x13f4ffff]
[ 3.892000] sm501-fb[2] [mem 0x10000000-0x103fffff]
[ 3.896000] sm501-fb[3] [irq 10]
[ 3.920000] sata_sil 0000:00:01.0: assign IRQ: got 66
[ 3.928000] sata_sil 0000:00:01.0: version 2.4
[ 3.932000] sata_sil 0000:00:01.0: enabling device (0000 -> 0003)
[ 3.940000] sata_sil 0000:00:01.0: cache line size not set. Driver may not function
[ 3.948000] sata_sil 0000:00:01.0: Applying R_ERR on DMA activate FIS errata fix
[ 3.956000] sata_sil 0000:00:01.0: enabling bus mastering
[ 4.004000] scsi host0: sata_sil
[ 4.020000] scsi host1: sata_sil
[ 4.036000] ata1: SATA max UDMA/100 mmio m512@0xfd0a0000 tf 0xfd0a0080 irq 66
[ 4.044000] ata2: SATA max UDMA/100 mmio m512@0xfd0a0000 tf 0xfd0a00c0 irq 66
[ 4.068000] physmap-flash physmap-flash.0: physmap platform flash device: [mem 0x00000000-0x03ffffff]
[ 4.076000] physmap-flash.0: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000001 Chip ID 0x002201
[ 4.088000] Amd/Fujitsu Extended Query Table at 0x0040
[ 4.092000] Amd/Fujitsu Extended Query version 1.3.
[ 4.100000] number of CFI chips: 1
[ 4.108000] Creating 4 MTD partitions on "physmap-flash.0":
[ 4.116000] 0x000000000000-0x000000080000 : "loader"
[ 4.176000] 0x000000080000-0x000000100000 : "bootenv"
[ 4.232000] 0x000000100000-0x000000500000 : "kernel"
[ 4.288000] 0x000000500000-0x000004000000 : "data"
[ 4.364000] ata1: SATA link down (SStatus 0 SControl 310)
[ 4.388000] r8169 0000:00:00.0: assign IRQ: got 65
[ 4.396000] r8169 0000:00:00.0: enabling device (0000 -> 0003)
[ 4.404000] r8169 0000:00:00.0: enabling bus mastering
[ 4.444000] libphy: r8169: probed
[ 4.468000] r8169 0000:00:00.0 eth0: RTL8169sc/8110sc, 74:90:50:00:02:03, XID 180, IRQ 65
[ 4.476000] r8169 0000:00:00.0 eth0: jumbo features [frames: 7146 bytes, tx checksumming: ok]
[ 4.504000] r8a66597_hcd r8a66597_hcd: USB Host Controller
[ 4.512000] r8a66597_hcd r8a66597_hcd: new USB bus registered, assigned bus number 1
[ 4.520000] r8a66597_hcd r8a66597_hcd: irq 2, io base 0x08000000
[ 4.564000] hub 1-0:1.0: USB hub found
[ 4.568000] hub 1-0:1.0: 2 ports detected
[ 4.600000] usbcore: registered new interface driver usb-storage
[ 4.612000] mousedev: PS/2 mouse device common for all mice
[ 4.624000] PCA9564/PCA9665 at 0x06000000: PCA9564 detected.
[ 4.632000] PCA9564/PCA9665 at 0x06000000: Choosing the clock frequency based on index is deprecated. Use the nominal frequency.
[ 4.644000] (null): No reset-pin found. Chip may get stuck!
[ 4.648000] PCA9564/PCA9665 at 0x06000000: Clock frequency is 330kHz
[ 4.660000] i2c-pca-platform i2c-pca-platform: registered.
[ 4.672000] cpufreq: SuperH CPU frequency driver.
[ 4.680000] cpufreq: cpufreq_online: ->get() failed
[ 4.696000] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 4.716000] ata2.00: ATA-9: TOSHIBA THNSNJ128GCSU, JURA0101, max UDMA/100
[ 4.724000] usbcore: registered new interface driver usbhid
[ 4.728000] usbhid: USB HID core driver
[ 4.732000] ata2.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 4.744000] NET: Registered protocol family 10
[ 4.748000] ata2.00: READ LOG DMA EXT failed, trying PIO
[ 4.764000] ata2.00: configured for UDMA/100
[ 4.772000] Segment Routing with IPv6
[ 4.776000] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 4.792000] scsi 1:0:0:0: Direct-Access ATA TOSHIBA THNSNJ12 0101 PQ: 0 ANSI: 5
[ 4.836000] NET: Registered protocol family 17
[ 4.852000] sd 1:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 4.860000] heartbeat: version 0.1.2 loaded
[ 4.868000] sd 1:0:0:0: [sda] Write Protect is off
[ 4.876000] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.884000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.896000] kmemleak: Kernel memory leak detector initialized (mem pool available: 15858)
[ 4.904000] kmemleak: Automatic memory scanning thread started
[ 4.940000] sda: sda1 sda2 sda3
[ 4.976000] sd 1:0:0:0: [sda] Attached SCSI disk
[ 4.988000] usb 1-1: new high-speed USB device number 2 using r8a66597_hcd
[ 5.252000] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 5.272000] scsi host2: usb-storage 1-1:1.0
[ 5.364000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 5.372000] VFS: Mounted root (ext4 filesystem) on device 8:1.
[ 5.396000] devtmpfs: mounted
[ 5.400000] Freeing unused kernel memory: 156K
[ 5.404000] This architecture does not have kernel memory protection.
[ 5.412000] Run /bin/bash as init process
[ 5.416000] with arguments:
[ 5.420000] /bin/bash
[ 5.420000] with environment:
[ 5.424000] HOME=/
[ 5.428000] TERM=linux
[ 5.464000] ------------[ cut here ]------------
[ 5.464000] WARNING: CPU: 0 PID: 1 at mm/slab.c:2589 cache_alloc_refill+0x216/0x6a0
[ 5.464000] Modules linked in:
[ 5.464000]
[ 5.464000] CPU: 0 PID: 1 Comm: swapper Not tainted 5.8.0-rc5-00026-g22b7a96ece82 #3
[ 5.464000] PC is at cache_alloc_refill+0x216/0x6a0
[ 5.464000] PR is at kmem_cache_alloc+0xd6/0x128
[ 5.464000] PC : 800ec0d2 SP : 9f445e68 SR : 400080f0
[ 5.464000] TEA : c00c30d0
[ 5.464000] R0 : 8062724c R1 : 8000fee8 R2 : 9f403540 R3 : 00000100
[ 5.464000] R4 : 9f403500 R5 : 00000000 R6 : 8068d5b0 R7 : 007fffff
[ 5.464000] R8 : 0000000c R9 : 9f403500 R10 : 8096fc0c R11 : 80044410
[ 5.464000] R12 : 9f405060 R13 : 00000dc0 R14 : 9f445e68
[ 5.464000] MACH: 10623bba MACL: 00000cc0 GBR : 2957bd58 PR : 800ec80a
[ 5.464000]
[ 5.464000] Call trace:
[ 5.464000] [<(ptrval)>] _raw_spin_unlock_irqrestore+0x0/0x54
[ 5.464000] [<(ptrval)>] _raw_spin_lock_irqsave+0x0/0x44
[ 5.464000] [<(ptrval)>] kmem_cache_alloc+0xd6/0x128
[ 5.464000] [<(ptrval)>] arch_local_irq_restore+0x0/0x2c
[ 5.464000] [<(ptrval)>] __raw_spin_lock_init+0x0/0x1c
[ 5.464000] [<(ptrval)>] pgd_alloc+0x10/0x24
[ 5.464000] [<(ptrval)>] memset+0x0/0x8c
[ 5.464000] [<(ptrval)>] __raw_spin_lock_init+0x0/0x1c
[ 5.464000] [<(ptrval)>] mm_init.isra.0+0x10e/0x194
[ 5.464000] [<(ptrval)>] mm_alloc+0x2a/0x4c
[ 5.464000] [<(ptrval)>] _raw_spin_unlock+0x0/0x44
[ 5.464000] [<(ptrval)>] __do_execve_file+0x2a6/0x97c
[ 5.464000] [<(ptrval)>] kmemleak_alloc+0x1e/0x30
[ 5.464000] [<(ptrval)>] arch_local_irq_restore+0x0/0x2c
[ 5.464000] [<(ptrval)>] getname_kernel+0x24/0xf8
[ 5.464000] [<(ptrval)>] do_execve+0x1a/0x28
[ 5.464000] [<(ptrval)>] debug_smp_processor_id+0x0/0x24
[ 5.464000] [<(ptrval)>] printk+0x0/0x50
[ 5.464000] [<(ptrval)>] run_init_process+0x5c/0x90
[ 5.464000] [<(ptrval)>] kernel_init+0x5c/0x100
[ 5.464000] [<(ptrval)>] ret_from_kernel_thread+0xc/0x14
[ 5.464000] [<(ptrval)>] schedule_tail+0x0/0x88
[ 5.464000] [<(ptrval)>] kernel_init+0x0/0x100
[ 5.464000]
[ 5.464000] Code:
[ 5.464000] 800ec0cc:
[ 5.464000] mov.w
[ 5.464000] 800ec222 <cache_alloc_refill+0x366/0x6a0>
[ 5.464000] ,
[ 5.464000] r3
[ 5.464000] ! 00000100 <0x100>
[ 5.464000]
[ 5.464000] 800ec0ce:
[ 5.464000] tst
[ 5.464000] r3
[ 5.464000] ,
[ 5.464000] r13
[ 5.464000]
[ 5.464000] 800ec0d0:
[ 5.464000] bt
[ 5.464000] 800ec0d4
[ 5.464000]
[ 5.464000] ->800ec0d2:
[ 5.464000] trapa
[ 5.464000] #62
[ 5.464000]
[ 5.464000] 800ec0d4:
[ 5.464000] mov.w
[ 5.464000] 800ec224 <cache_alloc_refill+0x368/0x6a0>
[ 5.464000] ,
[ 5.464000] r1
[ 5.464000] ! 00000400 <0x400>
[ 5.464000]
[ 5.464000] 800ec0d6:
[ 5.464000] mov
[ 5.464000] r13
[ 5.464000] ,
[ 5.464000] r2
[ 5.464000]
[ 5.464000] 800ec0d8:
[ 5.464000] mov.l
[ 5.464000] 800ec238 <cache_alloc_refill+0x37c/0x6a0>
[ 5.464000] ,
[ 5.464000] r12
[ 5.464000] ! 003beee0 <0x3beee0>
[ 5.464000]
[ 5.464000] 800ec0da:
[ 5.464000] and
[ 5.464000] r1
[ 5.464000] ,
[ 5.464000] r2
[ 5.464000]
[ 5.464000] 800ec0dc:
[ 5.464000] tst
[ 5.464000] r1
[ 5.464000] ,
[ 5.464000] r13
[ 5.464000]
[ 5.464000]
[ 5.464000] ---[ end trace 8fe2f9c439309f6b ]---
bash: cannot set terminal process group (-1): Inappropriate ioctl for device
bash: no job control in this shell
root@(none):/# [ 6.340000] usb 1-1: address 2, EndpointAddress 0x02 use DMA FIFO
[ 6.344000] usb 1-1: address 2, EndpointAddress 0x81 use DMA FIFO
[ 6.352000] scsi 2:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS
[ 6.392000] sd 2:0:0:0: [sdb] 7936000 512-byte logical blocks: (4.06 GB/3.78 GiB)
[ 6.404000] sd 2:0:0:0: [sdb] Write Protect is off
[ 6.408000] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 6.416000] sd 2:0:0:0: [sdb] No Caching mode page found
[ 6.420000] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 6.456000] sdb: sdb1
[ 6.480000] sd 2:0:0:0: [sdb] Attached SCSI removable disk
==========================================
[ 5.464000] ------------[ cut here ]------------
[ 5.464000] WARNING: CPU: 0 PID: 1 at mm/slab.c:2589 cache_alloc_refill+0x216/0x6a0
[ 5.464000] Modules linked in:
[ 5.464000]
[ 5.464000] CPU: 0 PID: 1 Comm: swapper Not tainted 5.8.0-rc5-00026-g22b7a96ece82 #3
[ 5.464000] PC is at cache_alloc_refill+0x216/0x6a0
[ 5.464000] PR is at kmem_cache_alloc+0xd6/0x128
[ 5.464000] PC : 800ec0d2 SP : 9f445e68 SR : 400080f0
[ 5.464000] TEA : c00c30d0
[ 5.464000] R0 : 8062724c R1 : 8000fee8 R2 : 9f403540 R3 : 00000100
[ 5.464000] R4 : 9f403500 R5 : 00000000 R6 : 8068d5b0 R7 : 007fffff
[ 5.464000] R8 : 0000000c R9 : 9f403500 R10 : 8096fc0c R11 : 80044410
[ 5.464000] R12 : 9f405060 R13 : 00000dc0 R14 : 9f445e68
[ 5.464000] MACH: 10623bba MACL: 00000cc0 GBR : 2957bd58 PR : 800ec80a
[ 5.464000]
[ 5.464000] Call trace:
[ 5.464000] [<(ptrval)>] _raw_spin_unlock_irqrestore+0x0/0x54
[ 5.464000] [<(ptrval)>] _raw_spin_lock_irqsave+0x0/0x44
[ 5.464000] [<(ptrval)>] kmem_cache_alloc+0xd6/0x128
[ 5.464000] [<(ptrval)>] arch_local_irq_restore+0x0/0x2c
[ 5.464000] [<(ptrval)>] __raw_spin_lock_init+0x0/0x1c
[ 5.464000] [<(ptrval)>] pgd_alloc+0x10/0x24
[ 5.464000] [<(ptrval)>] memset+0x0/0x8c
[ 5.464000] [<(ptrval)>] __raw_spin_lock_init+0x0/0x1c
[ 5.464000] [<(ptrval)>] mm_init.isra.0+0x10e/0x194
[ 5.464000] [<(ptrval)>] mm_alloc+0x2a/0x4c
[ 5.464000] [<(ptrval)>] _raw_spin_unlock+0x0/0x44
[ 5.464000] [<(ptrval)>] __do_execve_file+0x2a6/0x97c
[ 5.464000] [<(ptrval)>] kmemleak_alloc+0x1e/0x30
[ 5.464000] [<(ptrval)>] arch_local_irq_restore+0x0/0x2c
[ 5.464000] [<(ptrval)>] getname_kernel+0x24/0xf8
[ 5.464000] [<(ptrval)>] do_execve+0x1a/0x28
[ 5.464000] [<(ptrval)>] debug_smp_processor_id+0x0/0x24
[ 5.464000] [<(ptrval)>] printk+0x0/0x50
[ 5.464000] [<(ptrval)>] run_init_process+0x5c/0x90
[ 5.464000] [<(ptrval)>] kernel_init+0x5c/0x100
[ 5.464000] [<(ptrval)>] ret_from_kernel_thread+0xc/0x14
[ 5.464000] [<(ptrval)>] schedule_tail+0x0/0x88
[ 5.464000] [<(ptrval)>] kernel_init+0x0/0x100
[ 5.464000]
[ 5.464000] Code:
[ 5.464000] 800ec0cc:
[ 5.464000] mov.w
[ 5.464000] 800ec222 <cache_alloc_refill+0x366/0x6a0>
[ 5.464000] ,
[ 5.464000] r3
[ 5.464000] ! 00000100 <0x100>
[ 5.464000]
[ 5.464000] 800ec0ce:
[ 5.464000] tst
[ 5.464000] r3
[ 5.464000] ,
[ 5.464000] r13
[ 5.464000]
[ 5.464000] 800ec0d0:
[ 5.464000] bt
[ 5.464000] 800ec0d4
[ 5.464000]
[ 5.464000] ->800ec0d2:
[ 5.464000] trapa
[ 5.464000] #62
[ 5.464000]
[ 5.464000] 800ec0d4:
[ 5.464000] mov.w
[ 5.464000] 800ec224 <cache_alloc_refill+0x368/0x6a0>
[ 5.464000] ,
[ 5.464000] r1
[ 5.464000] ! 00000400 <0x400>
[ 5.464000]
[ 5.464000] 800ec0d6:
[ 5.464000] mov
[ 5.464000] r13
[ 5.464000] ,
[ 5.464000] r2
[ 5.464000]
[ 5.464000] 800ec0d8:
[ 5.464000] mov.l
[ 5.464000] 800ec238 <cache_alloc_refill+0x37c/0x6a0>
[ 5.464000] ,
[ 5.464000] r12
[ 5.464000] ! 003beee0 <0x3beee0>
[ 5.464000]
[ 5.464000] 800ec0da:
[ 5.464000] and
[ 5.464000] r1
[ 5.464000] ,
[ 5.464000] r2
[ 5.464000]
[ 5.464000] 800ec0dc:
[ 5.464000] tst
[ 5.464000] r1
[ 5.464000] ,
[ 5.464000] r13
[ 5.464000]
[ 5.464000]
[ 5.464000] ---[ end trace 8fe2f9c439309f6b ]---
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer - glaubitz@debian.org
`. `' Freie Universitaet Berlin - glaubitz@physik.fu-berlin.de
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
WARNING: multiple messages have this Message-ID (diff)
From: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
To: Rich Felker <dalias@libc.org>
Cc: Christoph Hellwig <hch@lst.de>,
Yoshinori Sato <ysato@users.sourceforge.jp>,
linux-sh@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: ioremap and dma cleanups and fixes for superh (2nd resend)
Date: Wed, 15 Jul 2020 01:12:33 +0200 [thread overview]
Message-ID: <011f29e6-ad71-366e-dbff-bc8471f3da60@physik.fu-berlin.de> (raw)
In-Reply-To: <8cbf2963-d0e4-0ca8-4ffe-c2057694447f@physik.fu-berlin.de>
Hello!
I have applied Christoph's full series on top of Linus' tree and I can confirm that
the kernel boots fine on my SH-7785LCR board.
Thus, for the whole series of patches:
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
However, independent of Christoph's series, the kernels throws two backtraces during
boot which I think should require a git bisect (unless I missed a configuration option
as I trimmed down the kernel a bit to make sure it's not too big).
See the traces below and let me know what you think.
Adrian
====================================================================================
## Booting kernel from Legacy Image at 89000000 ...
Image Name: Linux-5.8.0-rc5-00026-g22b7a96ec
Image Type: SuperH Linux Kernel Image (gzip compressed)
Data Size: 4058011 Bytes = 3.9 MiB
Load Address: 80001000
Entry Point: 80002000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
[ 0.000000] Linux version 5.8.0-rc5-00026-g22b7a96ece82 (glaubitz@epyc) (sh4-linux-gnu-gcc (Debian 9.3.0-13) 9.3.0, GNU ld (GNU Binutils for Debian) 2.34.90.20200706) #3 PREEMPT Wed Jul 15 01:03:46 CEST 2020
[ 0.000000] Boot params:
[ 0.000000] ... MOUNT_ROOT_RDONLY - 00000000
[ 0.000000] ... RAMDISK_FLAGS - 00000000
[ 0.000000] ... ORIG_ROOT_DEV - 00000000
[ 0.000000] ... LOADER_TYPE - 00000000
[ 0.000000] ... INITRD_START - 00000000
[ 0.000000] ... INITRD_SIZE - 00000000
[ 0.000000] Booting machvec: SH7785LCR
[ 0.000000] PMB: boot mappings:
[ 0.000000] 0x00080000 -> 0x00040000 [ 512MB cached ]
[ 0.000000] 0x000a0000 -> 0x00040000 [ 16MB uncached ]
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000040000000-0x000000005fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000040000000-0x000000005fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000005fffffff]
[ 0.000000] On node 0 totalpages: 131072
[ 0.000000] Normal zone: 1024 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 131072 pages, LIFO batch:31
[ 0.000000] Renesas Technology Corp. R0P7785LC0011RL support.
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048
[ 0.000000] Kernel command line: console=ttySC1,115200 root=/dev/sda1 init=/bin/bash
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[ 0.000000] Sorting __ex_table...
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] PVR=10300700 CVR=71440211 PRR=00000250
[ 0.000000] I-cache : n_ways=4 n_sets=256 way_incr=8192
[ 0.000000] I-cache : entry_mask=0x00001fe0 alias_mask=0x00001000 n_aliases=2
[ 0.000000] D-cache : n_ways=4 n_sets=256 way_incr=8192
[ 0.000000] D-cache : entry_mask=0x00001fe0 alias_mask=0x00001000 n_aliases=2
[ 0.000000] Memory: 510080K/524288K available (4601K kernel code, 276K rwdata, 1660K rodata, 156K init, 2966K bss, 14204K reserved, 0K cma-reserved)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xdffd7000 - 0xdffff000 ( 160 kB)
[ 0.000000] vmalloc : 0xc0000000 - 0xdffd5000 ( 511 MB)
[ 0.000000] lowmem : 0x80000000 - 0xa0000000 ( 512 MB) (cached)
[ 0.000000] : 0xa0000000 - 0xa1000000 ( 16 MB) (uncached)
[ 0.000000] .init : 0x80666000 - 0x8068d000 ( 156 kB)
[ 0.000000] .data : 0x80480594 - 0x806658d0 (1940 kB)
[ 0.000000] .text : 0x80001000 - 0x80480594 (4605 kB)
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] NR_IRQS: 8, nr_irqs: 8, preallocated irqs: 0
[ 0.000000] intc: Registered controller 'sh7785' with 67 IRQs
[ 0.000000] intc: Registered controller 'sh7785-irq4567' with 4 IRQs
[ 0.000000] intc: Registered controller 'sh7785-irq0123' with 4 IRQs
[ 0.000000] random: get_random_bytes called from start_kernel+0x264/0x5c2 with crng_init=0
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] sh-tmu.0: ch0: used for clock events
[ 0.000000] sh-tmu.0: ch0: used for periodic clock events
[ 0.000000] sh-tmu.0: ch1: used as clock source
[ 0.000000] clocksource: sh-tmu.0: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 152900847964 ns
[ 0.000000] sh-tmu.1: ch0: used for clock events
[ 0.000000] sh-tmu.1: ch1: used as clock source
[ 0.000000] clocksource: sh-tmu.1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 152900847964 ns
[ 0.000000] sched_clock: 32 bits at 250 Hz, resolution 4000000ns, wraps every 8589934590000000ns
[ 0.000000] Calibrating delay loop (skipped)... 599.99 BogoMIPS PRESET (lpj=1199999)
[ 0.000000] pid_max: default: 32768 minimum: 301
[ 0.000000] LSM: Security Framework initializing
[ 0.000000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.000000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.012000] CPU: SH7785
[ 0.016000] Performance Events: sh4a support registered
[ 0.020000] rcu: Hierarchical SRCU implementation.
[ 0.024000] devtmpfs: initialized
[ 0.044000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.044000] futex hash table entries: 256 (order: 0, 7168 bytes, linear)
[ 0.048000] pinctrl core: initialized pinctrl subsystem
[ 0.060000] NET: Registered protocol family 16
[ 0.140000] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
[ 0.144000] audit: initializing netlink subsys (disabled)
[ 0.148000] audit: type=2000 audit(0.144:1): state=initialized audit_enabled=0 res=1
[ 0.168000] cpuidle: using governor ladder
[ 0.168000] cpuidle: using governor menu
[ 0.228000] sh-pfc pfc-sh7785: sh7785_pfc handling gpio 0 -> 110
[ 0.232000] sh-pfc pfc-sh7785: sh7785_pfc handling gpio 111 -> 275
[ 0.232000] sh-pfc pfc-sh7785: sh7785_pfc support registered
[ 0.232000] HW Breakpoints: SH-4A UBC support registered
[ 0.232000] PCI: Starting initialization.
[ 0.484000] PCI: Found a Renesas SH7785 host controller, revision 1.
[ 0.484000] PCI: Checking 66MHz capabilities...
[ 0.484000] PCI: Running at 66MHz.
[ 0.932000] HugeTLB registered 1.00 MiB page size, pre-allocated 0 pages
[ 0.980000] SCSI subsystem initialized
[ 0.988000] libata version 3.00 loaded.
[ 1.004000] usbcore: registered new interface driver usbfs
[ 1.004000] usbcore: registered new interface driver hub
[ 1.008000] usbcore: registered new device driver usb
[ 1.016000] sh_tmu sh-tmu.0: kept as earlytimer
[ 1.020000] sh_tmu sh-tmu.1: kept as earlytimer
[ 1.024000] random: fast init done
[ 1.048000] DMA: Registering sh_dmac handler (12 channels).
[ 1.096000] DMA: Registering DMA API.
[ 1.100000] PCI host bridge to bus 0000:00
[ 1.100000] pci_bus 0000:00: root bus resource [io 0x1000-0x3fffff]
[ 1.100000] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfdffffff]
[ 1.100000] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
[ 1.100000] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
[ 1.104000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 1.104000] pci_bus 0000:00: scanning bus
[ 1.104000] pci 0000:00:00.0: [10ec:8169] type 00 class 0x020000
[ 1.104000] pci 0000:00:00.0: reg 0x10: [io 0x0000-0x00ff]
[ 1.104000] pci 0000:00:00.0: reg 0x14: [mem 0x00000000-0x000000ff]
[ 1.104000] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 1.104000] pci 0000:00:00.0: supports D1 D2
[ 1.104000] pci 0000:00:00.0: PME# supported from D1 D2 D3hot
[ 1.104000] pci 0000:00:00.0: PME# disabled
[ 1.108000] pci 0000:00:01.0: [1095:3512] type 00 class 0x018000
[ 1.108000] pci 0000:00:01.0: reg 0x10: [io 0x0000-0x0007]
[ 1.108000] pci 0000:00:01.0: reg 0x14: [io 0x0000-0x0003]
[ 1.108000] pci 0000:00:01.0: reg 0x18: [io 0x0000-0x0007]
[ 1.108000] pci 0000:00:01.0: reg 0x1c: [io 0x0000-0x0003]
[ 1.108000] pci 0000:00:01.0: reg 0x20: [io 0x0000-0x000f]
[ 1.108000] pci 0000:00:01.0: reg 0x24: [mem 0x00000000-0x000001ff]
[ 1.108000] pci 0000:00:01.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
[ 1.108000] pci 0000:00:01.0: supports D1 D2
[ 1.116000] pci_bus 0000:00: fixups for bus
[ 1.116000] pci_bus 0000:00: bus scan returning with max=00
[ 1.116000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[ 1.116000] pci 0000:00:01.0: BAR 6: assigned [mem 0xfd000000-0xfd07ffff pref]
[ 1.116000] pci 0000:00:00.0: BAR 6: assigned [mem 0xfd080000-0xfd09ffff pref]
[ 1.116000] pci 0000:00:01.0: BAR 5: assigned [mem 0xfd0a0000-0xfd0a01ff]
[ 1.116000] pci 0000:00:00.0: BAR 0: assigned [io 0x1000-0x10ff]
[ 1.116000] pci 0000:00:00.0: BAR 1: assigned [mem 0xfd0a0200-0xfd0a02ff]
[ 1.116000] pci 0000:00:01.0: BAR 4: assigned [io 0x1400-0x140f]
[ 1.116000] pci 0000:00:01.0: BAR 0: assigned [io 0x1410-0x1417]
[ 1.116000] pci 0000:00:01.0: BAR 2: assigned [io 0x1418-0x141f]
[ 1.116000] pci 0000:00:01.0: BAR 1: assigned [io 0x1420-0x1423]
[ 1.116000] pci 0000:00:01.0: BAR 3: assigned [io 0x1424-0x1427]
[ 1.120000] clocksource: Switched to clocksource sh-tmu.0
[ 1.124000] sh_tmu sh-tmu.0: ch0: used for oneshot clock events
[ 1.456000] NET: Registered protocol family 2
[ 1.464000] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 6144 bytes, linear)
[ 1.464000] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
[ 1.464000] TCP bind hash table entries: 4096 (order: 4, 81920 bytes, linear)
[ 1.464000] TCP: Hash tables configured (established 4096 bind 4096)
[ 1.464000] UDP hash table entries: 256 (order: 1, 12288 bytes, linear)
[ 1.464000] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes, linear)
[ 1.468000] NET: Registered protocol family 1
[ 1.468000] PCI: CLS 0 bytes, default 32
[ 1.468000] sq: Registering store queue API.
[ 1.512000] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 1.536000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 1.536000] io scheduler mq-deadline registered
[ 1.544000] SuperH (H)SCI(F) driver initialized
[ 1.544000] sh-sci.0: ttySC0 at MMIO 0xffea0000 (irq = 40, base_baud = 0) is a scif
[ 1.560000] sh-sci.1: ttySC1 at MMIO 0xffeb0000 (irq = 44, base_baud = 0) is a scif
[ 1.560000] BUG: spinlock bad magic on CPU#0, swapper/1
[ 1.560000] lock: sci_ports+0x1d8/0xb10, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0
[ 1.560000] CPU: 0 PID: 1 Comm: swapper Not tainted 5.8.0-rc5-00026-g22b7a96ece82 #3
[ 1.560000] Stack: (0x9f445ce8 to 0x9f446000)
[ 1.560000] 5ce0:
[ 1.560000]
[ 1.560000]
[ 1.560000] 80260daa
[ 1.560000] 9f445cfc
[ 1.560000] 80048fd8
[ 1.560000] 8096c158
[ 1.560000] 805ab908
[ 1.560000] 8004449c
[ 1.560000]
[ 1.560000] 5d00:
[ 1.560000] 9f445d08
[ 1.560000] 00000000
[ 1.560000] ffffffff
[ 1.560000] 00000000
[ 1.560000] 8004455e
[ 1.560000] 9f445d24
[ 1.560000] 8064b2c0
[ 1.560000] 8096c158
[ 1.560000]
[ 1.560000] 5d20:
[ 1.560000] 8096c158
[ 1.560000] 8047e57c
[ 1.560000] 9f445d30
[ 1.560000] 00000000
[ 1.560000] 802b850a
[ 1.560000] 9f445d40
[ 1.560000] 8096c158
[ 1.560000] 9f66694c
[ 1.560000]
[ 1.560000] 5d40:
[ 1.560000] 9f445d70
[ 1.560000] 0000002c
[ 1.560000] 00000000
[ 1.560000] 805cc1a0
[ 1.560000] 9f4d7660
[ 1.560000] 9f666a88
[ 1.560000] 805e101c
[ 1.560000] 0000002c
[ 1.560000]
[ 1.560000] 5d60:
[ 1.560000] 9f647d80
[ 1.560000] 9f445d70
[ 1.560000] 00000000
[ 1.560000] 9f666a48
[ 1.560000] 4f494d4d
[ 1.560000] 66783020
[ 1.560000] 30626566
[ 1.560000] 00303030
[ 1.560000]
[ 1.560000] 5d80:
[ 1.560000] 9f445d9c
[ 1.560000] 00000000
[ 1.560000] 8096bf7c
[ 1.560000] 8062deb4
[ 1.560000] 8096bf80
[ 1.560000] 8096c158
[ 1.560000] 8096c158
[ 1.560000] 8096c214
[ 1.560000]
[ 1.560000] 5da0:
[ 1.560000] 9f445db0
[ 1.560000] 805cc298
[ 1.560000] 805cc29c
[ 1.560000] 00000000
[ 1.560000] b6b1ed6c
[ 1.560000] 802bc842
[ 1.560000] 9f445dd4
[ 1.560000] 00000000
[ 1.560000]
[ 1.560000] 5dc0:
[ 1.560000] 8096bf7c
[ 1.560000] 8096c158
[ 1.560000] 8096bf80
[ 1.560000] 8096c158
[ 1.560000] 00000001
[ 1.560000] 00000000
[ 1.560000] 9f4d81c8
[ 1.560000] 805e5c0c
[ 1.560000]
[ 1.560000] 5de0:
[ 1.560000] 8062dec0
[ 1.560000] 8062e050
[ 1.560000] 802c9890
[ 1.560000] 9f445e08
[ 1.560000] 00000000
[ 1.560000] 8096cd10
[ 1.560000] 8062df3c
[ 1.560000] 8096ce20
[ 1.560000]
[ 1.560000] 5e00:
[ 1.560000] 8062dec0
[ 1.560000] 8064b1b4
[ 1.560000] 802c7cdc
[ 1.560000] 9f445e18
[ 1.560000] 8062dec0
[ 1.560000] 00000000
[ 1.560000] 00000000
[ 1.560000] 8064b1b4
[ 1.560000]
[ 1.560000] 5e20:
[ 1.560000] 802c7fe6
[ 1.560000] 9f445e40
[ 1.560000] 8064b1f4
[ 1.560000] 8064bb08
[ 1.560000] 8062724c
[ 1.560000] 00000000
[ 1.560000] 8064b1b4
[ 1.560000] 8062dec0
[ 1.560000]
[ 1.560000] 5e40:
[ 1.560000] 802c81ce
[ 1.560000] 9f445e54
[ 1.560000] 00000000
[ 1.560000] 8064b1b4
[ 1.560000] 8062dec0
[ 1.560000] 802c8220
[ 1.560000] 9f445e68
[ 1.560000] 802627f4
[ 1.560000]
[ 1.560000] 5e60:
[ 1.560000] 8062dec0
[ 1.560000] 8064b1b4
[ 1.560000] 802c619a
[ 1.560000] 9f445e7c
[ 1.560000] 802627f4
[ 1.560000] 802c81e0
[ 1.560000] 8064b1b4
[ 1.560000] 8047e4e0
[ 1.560000]
[ 1.560000] 5e80:
[ 1.560000] 9f40bc70
[ 1.560000] 9f40f5c0
[ 1.560000] b6b1ed6c
[ 1.560000] 802c778a
[ 1.560000] 9f445ea4
[ 1.560000] 8064bac8
[ 1.560000] 00000000
[ 1.560000] 9f664f60
[ 1.560000]
[ 1.560000] 5ea0:
[ 1.560000] 8064b1b4
[ 1.560000] 802c71d2
[ 1.560000] 9f445eac
[ 1.560000] 805a0d88
[ 1.560000] 802c87cc
[ 1.560000] 9f445ed0
[ 1.560000] 8068d000
[ 1.560000] 00000000
[ 1.560000]
[ 1.560000] 5ec0:
[ 1.560000] 8062724c
[ 1.560000] 9f445efc
[ 1.560000] 8068d008
[ 1.560000] 8064b1b4
[ 1.560000] 802c9856
[ 1.560000] 9f445ee4
[ 1.560000] 9f445efc
[ 1.560000] 8068d008
[ 1.560000]
[ 1.560000] 5ee0:
[ 1.560000] 80678800
[ 1.560000] 80678816
[ 1.560000] 9f445eec
[ 1.560000] 80002292
[ 1.560000] 9f445ef4
[ 1.560000] 9f422dd6
[ 1.560000] 00000000
[ 1.560000] 8002d300
[ 1.560000]
[ 1.560000] 5f00:
[ 1.560000] 9f445f0c
[ 1.560000] 000000b2
[ 1.560000] 9f445f0c
[ 1.560000] 00000006
[ 1.560000] 00000006
[ 1.560000] 00000000
[ 1.560000] 805dda74
[ 1.560000] 8061f9f0
[ 1.560000]
[ 1.560000] 5f20:
[ 1.560000] 80666098
[ 1.560000] 00000000
[ 1.560000] 9f422dea
[ 1.560000] 00000000
[ 1.560000] 9f422de5
[ 1.560000] 9f422dea
[ 1.560000] b6b1ed6c
[ 1.560000] 80666c92
[ 1.560000]
[ 1.560000] 5f40:
[ 1.560000] 9f445f5c
[ 1.560000] 000000b2
[ 1.560000] 80685900
[ 1.560000] 9f422dc0
[ 1.560000] 806858e0
[ 1.560000] 8068d008
[ 1.560000] 8061f9f0
[ 1.560000] 00000006
[ 1.560000]
[ 1.560000] 5f60:
[ 1.560000] 00000006
[ 1.560000] 00000000
[ 1.560000] 80666098
[ 1.560000] 8068a6d0
[ 1.560000] 00000007
[ 1.560000] 804778b4
[ 1.560000] 9f445f94
[ 1.560000] 80636160
[ 1.560000]
[ 1.560000] 5f80:
[ 1.560000] 80477788
[ 1.560000] 8063659c
[ 1.560000] 00000000
[ 1.560000] 9f442020
[ 1.560000] 80048fd8
[ 1.560000] 80007224
[ 1.560000] 9f449f28
[ 1.560000] 9f442020
[ 1.560000]
[ 1.560000] 5fa0:
[ 1.560000] 80034b98
[ 1.560000] 00000000
[ 1.560000] 00000000
[ 1.560000] 00000000
[ 1.560000] 00000000
[ 1.560000] 00000000
[ 1.560000] 804778a4
[ 1.560000] 00000000
[ 1.560000]
[ 1.560000] 5fc0:
[ 1.560000] 00000000
[ 1.560000] 00000000
[ 1.560000] 00000000
[ 1.560000] 00000000
[ 1.560000] 00000000
[ 1.560000] 00000000
[ 1.560000] 00000000
[ 1.560000] 00000000
[ 1.560000]
[ 1.560000] 5fe0:
[ 1.560000] 00000000
[ 1.560000] 00000000
[ 1.560000] 00000000
[ 1.560000] 40008000
[ 1.560000] 00000000
[ 1.560000] 00000000
[ 1.560000] 00000000
[ 1.560000] 00000000
[ 1.560000]
[ 1.560000]
[ 1.560000] Call trace:
[ 1.560000] [<(ptrval)>] dump_stack+0x1a/0x30
[ 1.560000] [<(ptrval)>] printk+0x0/0x50
[ 1.560000] [<(ptrval)>] spin_dump+0x58/0x88
[ 1.560000] [<(ptrval)>] do_raw_spin_lock+0x4a/0x94
[ 1.560000] [<(ptrval)>] _raw_spin_lock_irqsave+0x24/0x44
[ 1.560000] [<(ptrval)>] uart_add_one_port+0x32a/0x470
[ 1.560000] [<(ptrval)>] sci_probe+0x116/0x2f4
[ 1.560000] [<(ptrval)>] platform_drv_probe+0x1c/0x60
[ 1.560000] [<(ptrval)>] really_probe+0xc0/0x2c8
[ 1.560000] [<(ptrval)>] driver_probe_device+0x26/0x6c
[ 1.560000] [<(ptrval)>] device_driver_attach+0x4a/0x5c
[ 1.560000] [<(ptrval)>] __driver_attach+0x40/0xc4
[ 1.560000] [<(ptrval)>] klist_next+0x0/0xe4
[ 1.560000] [<(ptrval)>] bus_for_each_dev+0x56/0xa8
[ 1.560000] [<(ptrval)>] klist_next+0x0/0xe4
[ 1.560000] [<(ptrval)>] __driver_attach+0x0/0xc4
[ 1.560000] [<(ptrval)>] _raw_spin_lock+0x10/0x28
[ 1.560000] [<(ptrval)>] driver_attach+0x12/0x24
[ 1.560000] [<(ptrval)>] bus_add_driver+0x13a/0x1bc
[ 1.560000] [<(ptrval)>] driver_register+0x50/0xf8
[ 1.560000] [<(ptrval)>] __platform_driver_register+0x22/0x40
[ 1.560000] [<(ptrval)>] sci_init+0x0/0x34
[ 1.560000] [<(ptrval)>] sci_init+0x16/0x34
[ 1.560000] [<(ptrval)>] do_one_initcall+0x5e/0x164
[ 1.560000] [<(ptrval)>] parse_args+0xe0/0x2b8
[ 1.560000] [<(ptrval)>] ignore_unknown_bootoption+0x0/0xc
[ 1.560000] [<(ptrval)>] kernel_init_freeable+0xf6/0x1e0
[ 1.560000] [<(ptrval)>] ignore_unknown_bootoption+0x0/0xc
[ 1.560000] [<(ptrval)>] kernel_init+0x10/0x100
[ 1.560000] [<(ptrval)>] debug_smp_processor_id+0x0/0x24
[ 1.560000] [<(ptrval)>] printk+0x0/0x50
[ 1.560000] [<(ptrval)>] ret_from_kernel_thread+0xc/0x14
[ 1.560000] [<(ptrval)>] schedule_tail+0x0/0x88
[ 1.560000] [<(ptrval)>] kernel_init+0x0/0x100
[ 1.560000]
[ 3.248000] printk: console [ttySC1] enabled
[ 3.264000] sh-sci.2: ttySC2 at MMIO 0xffec0000 (irq = 60, base_baud = 0) is a scif
[ 3.284000] sh-sci.3: ttySC3 at MMIO 0xffed0000 (irq = 61, base_baud = 0) is a scif
[ 3.304000] sh-sci.4: ttySC4 at MMIO 0xffee0000 (irq = 62, base_baud = 0) is a scif
[ 3.324000] sh-sci.5: ttySC5 at MMIO 0xffef0000 (irq = 63, base_baud = 0) is a scif
[ 3.628000] brd: module loaded
[ 3.816000] loop: module loaded
[ 3.820000] sm501 sm501: SM501 At (ptrval): Version 050100c0, 4 Mb, IRQ 10
[ 3.828000] sm501 sm501: setting M1XCLK to 112000000
[ 3.856000] sm501 sm501: setting MCLK to 84000000
[ 3.884000] sm501-fb[0] [mem 0x13e80000-0x13e8ffff]
[ 3.888000] sm501-fb[1] [mem 0x13f00000-0x13f4ffff]
[ 3.892000] sm501-fb[2] [mem 0x10000000-0x103fffff]
[ 3.896000] sm501-fb[3] [irq 10]
[ 3.920000] sata_sil 0000:00:01.0: assign IRQ: got 66
[ 3.928000] sata_sil 0000:00:01.0: version 2.4
[ 3.932000] sata_sil 0000:00:01.0: enabling device (0000 -> 0003)
[ 3.940000] sata_sil 0000:00:01.0: cache line size not set. Driver may not function
[ 3.948000] sata_sil 0000:00:01.0: Applying R_ERR on DMA activate FIS errata fix
[ 3.956000] sata_sil 0000:00:01.0: enabling bus mastering
[ 4.004000] scsi host0: sata_sil
[ 4.020000] scsi host1: sata_sil
[ 4.036000] ata1: SATA max UDMA/100 mmio m512@0xfd0a0000 tf 0xfd0a0080 irq 66
[ 4.044000] ata2: SATA max UDMA/100 mmio m512@0xfd0a0000 tf 0xfd0a00c0 irq 66
[ 4.068000] physmap-flash physmap-flash.0: physmap platform flash device: [mem 0x00000000-0x03ffffff]
[ 4.076000] physmap-flash.0: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000001 Chip ID 0x002201
[ 4.088000] Amd/Fujitsu Extended Query Table at 0x0040
[ 4.092000] Amd/Fujitsu Extended Query version 1.3.
[ 4.100000] number of CFI chips: 1
[ 4.108000] Creating 4 MTD partitions on "physmap-flash.0":
[ 4.116000] 0x000000000000-0x000000080000 : "loader"
[ 4.176000] 0x000000080000-0x000000100000 : "bootenv"
[ 4.232000] 0x000000100000-0x000000500000 : "kernel"
[ 4.288000] 0x000000500000-0x000004000000 : "data"
[ 4.364000] ata1: SATA link down (SStatus 0 SControl 310)
[ 4.388000] r8169 0000:00:00.0: assign IRQ: got 65
[ 4.396000] r8169 0000:00:00.0: enabling device (0000 -> 0003)
[ 4.404000] r8169 0000:00:00.0: enabling bus mastering
[ 4.444000] libphy: r8169: probed
[ 4.468000] r8169 0000:00:00.0 eth0: RTL8169sc/8110sc, 74:90:50:00:02:03, XID 180, IRQ 65
[ 4.476000] r8169 0000:00:00.0 eth0: jumbo features [frames: 7146 bytes, tx checksumming: ok]
[ 4.504000] r8a66597_hcd r8a66597_hcd: USB Host Controller
[ 4.512000] r8a66597_hcd r8a66597_hcd: new USB bus registered, assigned bus number 1
[ 4.520000] r8a66597_hcd r8a66597_hcd: irq 2, io base 0x08000000
[ 4.564000] hub 1-0:1.0: USB hub found
[ 4.568000] hub 1-0:1.0: 2 ports detected
[ 4.600000] usbcore: registered new interface driver usb-storage
[ 4.612000] mousedev: PS/2 mouse device common for all mice
[ 4.624000] PCA9564/PCA9665 at 0x06000000: PCA9564 detected.
[ 4.632000] PCA9564/PCA9665 at 0x06000000: Choosing the clock frequency based on index is deprecated. Use the nominal frequency.
[ 4.644000] (null): No reset-pin found. Chip may get stuck!
[ 4.648000] PCA9564/PCA9665 at 0x06000000: Clock frequency is 330kHz
[ 4.660000] i2c-pca-platform i2c-pca-platform: registered.
[ 4.672000] cpufreq: SuperH CPU frequency driver.
[ 4.680000] cpufreq: cpufreq_online: ->get() failed
[ 4.696000] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 4.716000] ata2.00: ATA-9: TOSHIBA THNSNJ128GCSU, JURA0101, max UDMA/100
[ 4.724000] usbcore: registered new interface driver usbhid
[ 4.728000] usbhid: USB HID core driver
[ 4.732000] ata2.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 4.744000] NET: Registered protocol family 10
[ 4.748000] ata2.00: READ LOG DMA EXT failed, trying PIO
[ 4.764000] ata2.00: configured for UDMA/100
[ 4.772000] Segment Routing with IPv6
[ 4.776000] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 4.792000] scsi 1:0:0:0: Direct-Access ATA TOSHIBA THNSNJ12 0101 PQ: 0 ANSI: 5
[ 4.836000] NET: Registered protocol family 17
[ 4.852000] sd 1:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 4.860000] heartbeat: version 0.1.2 loaded
[ 4.868000] sd 1:0:0:0: [sda] Write Protect is off
[ 4.876000] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.884000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.896000] kmemleak: Kernel memory leak detector initialized (mem pool available: 15858)
[ 4.904000] kmemleak: Automatic memory scanning thread started
[ 4.940000] sda: sda1 sda2 sda3
[ 4.976000] sd 1:0:0:0: [sda] Attached SCSI disk
[ 4.988000] usb 1-1: new high-speed USB device number 2 using r8a66597_hcd
[ 5.252000] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 5.272000] scsi host2: usb-storage 1-1:1.0
[ 5.364000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 5.372000] VFS: Mounted root (ext4 filesystem) on device 8:1.
[ 5.396000] devtmpfs: mounted
[ 5.400000] Freeing unused kernel memory: 156K
[ 5.404000] This architecture does not have kernel memory protection.
[ 5.412000] Run /bin/bash as init process
[ 5.416000] with arguments:
[ 5.420000] /bin/bash
[ 5.420000] with environment:
[ 5.424000] HOME=/
[ 5.428000] TERM=linux
[ 5.464000] ------------[ cut here ]------------
[ 5.464000] WARNING: CPU: 0 PID: 1 at mm/slab.c:2589 cache_alloc_refill+0x216/0x6a0
[ 5.464000] Modules linked in:
[ 5.464000]
[ 5.464000] CPU: 0 PID: 1 Comm: swapper Not tainted 5.8.0-rc5-00026-g22b7a96ece82 #3
[ 5.464000] PC is at cache_alloc_refill+0x216/0x6a0
[ 5.464000] PR is at kmem_cache_alloc+0xd6/0x128
[ 5.464000] PC : 800ec0d2 SP : 9f445e68 SR : 400080f0
[ 5.464000] TEA : c00c30d0
[ 5.464000] R0 : 8062724c R1 : 8000fee8 R2 : 9f403540 R3 : 00000100
[ 5.464000] R4 : 9f403500 R5 : 00000000 R6 : 8068d5b0 R7 : 007fffff
[ 5.464000] R8 : 0000000c R9 : 9f403500 R10 : 8096fc0c R11 : 80044410
[ 5.464000] R12 : 9f405060 R13 : 00000dc0 R14 : 9f445e68
[ 5.464000] MACH: 10623bba MACL: 00000cc0 GBR : 2957bd58 PR : 800ec80a
[ 5.464000]
[ 5.464000] Call trace:
[ 5.464000] [<(ptrval)>] _raw_spin_unlock_irqrestore+0x0/0x54
[ 5.464000] [<(ptrval)>] _raw_spin_lock_irqsave+0x0/0x44
[ 5.464000] [<(ptrval)>] kmem_cache_alloc+0xd6/0x128
[ 5.464000] [<(ptrval)>] arch_local_irq_restore+0x0/0x2c
[ 5.464000] [<(ptrval)>] __raw_spin_lock_init+0x0/0x1c
[ 5.464000] [<(ptrval)>] pgd_alloc+0x10/0x24
[ 5.464000] [<(ptrval)>] memset+0x0/0x8c
[ 5.464000] [<(ptrval)>] __raw_spin_lock_init+0x0/0x1c
[ 5.464000] [<(ptrval)>] mm_init.isra.0+0x10e/0x194
[ 5.464000] [<(ptrval)>] mm_alloc+0x2a/0x4c
[ 5.464000] [<(ptrval)>] _raw_spin_unlock+0x0/0x44
[ 5.464000] [<(ptrval)>] __do_execve_file+0x2a6/0x97c
[ 5.464000] [<(ptrval)>] kmemleak_alloc+0x1e/0x30
[ 5.464000] [<(ptrval)>] arch_local_irq_restore+0x0/0x2c
[ 5.464000] [<(ptrval)>] getname_kernel+0x24/0xf8
[ 5.464000] [<(ptrval)>] do_execve+0x1a/0x28
[ 5.464000] [<(ptrval)>] debug_smp_processor_id+0x0/0x24
[ 5.464000] [<(ptrval)>] printk+0x0/0x50
[ 5.464000] [<(ptrval)>] run_init_process+0x5c/0x90
[ 5.464000] [<(ptrval)>] kernel_init+0x5c/0x100
[ 5.464000] [<(ptrval)>] ret_from_kernel_thread+0xc/0x14
[ 5.464000] [<(ptrval)>] schedule_tail+0x0/0x88
[ 5.464000] [<(ptrval)>] kernel_init+0x0/0x100
[ 5.464000]
[ 5.464000] Code:
[ 5.464000] 800ec0cc:
[ 5.464000] mov.w
[ 5.464000] 800ec222 <cache_alloc_refill+0x366/0x6a0>
[ 5.464000] ,
[ 5.464000] r3
[ 5.464000] ! 00000100 <0x100>
[ 5.464000]
[ 5.464000] 800ec0ce:
[ 5.464000] tst
[ 5.464000] r3
[ 5.464000] ,
[ 5.464000] r13
[ 5.464000]
[ 5.464000] 800ec0d0:
[ 5.464000] bt
[ 5.464000] 800ec0d4
[ 5.464000]
[ 5.464000] ->800ec0d2:
[ 5.464000] trapa
[ 5.464000] #62
[ 5.464000]
[ 5.464000] 800ec0d4:
[ 5.464000] mov.w
[ 5.464000] 800ec224 <cache_alloc_refill+0x368/0x6a0>
[ 5.464000] ,
[ 5.464000] r1
[ 5.464000] ! 00000400 <0x400>
[ 5.464000]
[ 5.464000] 800ec0d6:
[ 5.464000] mov
[ 5.464000] r13
[ 5.464000] ,
[ 5.464000] r2
[ 5.464000]
[ 5.464000] 800ec0d8:
[ 5.464000] mov.l
[ 5.464000] 800ec238 <cache_alloc_refill+0x37c/0x6a0>
[ 5.464000] ,
[ 5.464000] r12
[ 5.464000] ! 003beee0 <0x3beee0>
[ 5.464000]
[ 5.464000] 800ec0da:
[ 5.464000] and
[ 5.464000] r1
[ 5.464000] ,
[ 5.464000] r2
[ 5.464000]
[ 5.464000] 800ec0dc:
[ 5.464000] tst
[ 5.464000] r1
[ 5.464000] ,
[ 5.464000] r13
[ 5.464000]
[ 5.464000]
[ 5.464000] ---[ end trace 8fe2f9c439309f6b ]---
bash: cannot set terminal process group (-1): Inappropriate ioctl for device
bash: no job control in this shell
root@(none):/# [ 6.340000] usb 1-1: address 2, EndpointAddress 0x02 use DMA FIFO
[ 6.344000] usb 1-1: address 2, EndpointAddress 0x81 use DMA FIFO
[ 6.352000] scsi 2:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS
[ 6.392000] sd 2:0:0:0: [sdb] 7936000 512-byte logical blocks: (4.06 GB/3.78 GiB)
[ 6.404000] sd 2:0:0:0: [sdb] Write Protect is off
[ 6.408000] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 6.416000] sd 2:0:0:0: [sdb] No Caching mode page found
[ 6.420000] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 6.456000] sdb: sdb1
[ 6.480000] sd 2:0:0:0: [sdb] Attached SCSI removable disk
====================================================================================
[ 5.464000] ------------[ cut here ]------------
[ 5.464000] WARNING: CPU: 0 PID: 1 at mm/slab.c:2589 cache_alloc_refill+0x216/0x6a0
[ 5.464000] Modules linked in:
[ 5.464000]
[ 5.464000] CPU: 0 PID: 1 Comm: swapper Not tainted 5.8.0-rc5-00026-g22b7a96ece82 #3
[ 5.464000] PC is at cache_alloc_refill+0x216/0x6a0
[ 5.464000] PR is at kmem_cache_alloc+0xd6/0x128
[ 5.464000] PC : 800ec0d2 SP : 9f445e68 SR : 400080f0
[ 5.464000] TEA : c00c30d0
[ 5.464000] R0 : 8062724c R1 : 8000fee8 R2 : 9f403540 R3 : 00000100
[ 5.464000] R4 : 9f403500 R5 : 00000000 R6 : 8068d5b0 R7 : 007fffff
[ 5.464000] R8 : 0000000c R9 : 9f403500 R10 : 8096fc0c R11 : 80044410
[ 5.464000] R12 : 9f405060 R13 : 00000dc0 R14 : 9f445e68
[ 5.464000] MACH: 10623bba MACL: 00000cc0 GBR : 2957bd58 PR : 800ec80a
[ 5.464000]
[ 5.464000] Call trace:
[ 5.464000] [<(ptrval)>] _raw_spin_unlock_irqrestore+0x0/0x54
[ 5.464000] [<(ptrval)>] _raw_spin_lock_irqsave+0x0/0x44
[ 5.464000] [<(ptrval)>] kmem_cache_alloc+0xd6/0x128
[ 5.464000] [<(ptrval)>] arch_local_irq_restore+0x0/0x2c
[ 5.464000] [<(ptrval)>] __raw_spin_lock_init+0x0/0x1c
[ 5.464000] [<(ptrval)>] pgd_alloc+0x10/0x24
[ 5.464000] [<(ptrval)>] memset+0x0/0x8c
[ 5.464000] [<(ptrval)>] __raw_spin_lock_init+0x0/0x1c
[ 5.464000] [<(ptrval)>] mm_init.isra.0+0x10e/0x194
[ 5.464000] [<(ptrval)>] mm_alloc+0x2a/0x4c
[ 5.464000] [<(ptrval)>] _raw_spin_unlock+0x0/0x44
[ 5.464000] [<(ptrval)>] __do_execve_file+0x2a6/0x97c
[ 5.464000] [<(ptrval)>] kmemleak_alloc+0x1e/0x30
[ 5.464000] [<(ptrval)>] arch_local_irq_restore+0x0/0x2c
[ 5.464000] [<(ptrval)>] getname_kernel+0x24/0xf8
[ 5.464000] [<(ptrval)>] do_execve+0x1a/0x28
[ 5.464000] [<(ptrval)>] debug_smp_processor_id+0x0/0x24
[ 5.464000] [<(ptrval)>] printk+0x0/0x50
[ 5.464000] [<(ptrval)>] run_init_process+0x5c/0x90
[ 5.464000] [<(ptrval)>] kernel_init+0x5c/0x100
[ 5.464000] [<(ptrval)>] ret_from_kernel_thread+0xc/0x14
[ 5.464000] [<(ptrval)>] schedule_tail+0x0/0x88
[ 5.464000] [<(ptrval)>] kernel_init+0x0/0x100
[ 5.464000]
[ 5.464000] Code:
[ 5.464000] 800ec0cc:
[ 5.464000] mov.w
[ 5.464000] 800ec222 <cache_alloc_refill+0x366/0x6a0>
[ 5.464000] ,
[ 5.464000] r3
[ 5.464000] ! 00000100 <0x100>
[ 5.464000]
[ 5.464000] 800ec0ce:
[ 5.464000] tst
[ 5.464000] r3
[ 5.464000] ,
[ 5.464000] r13
[ 5.464000]
[ 5.464000] 800ec0d0:
[ 5.464000] bt
[ 5.464000] 800ec0d4
[ 5.464000]
[ 5.464000] ->800ec0d2:
[ 5.464000] trapa
[ 5.464000] #62
[ 5.464000]
[ 5.464000] 800ec0d4:
[ 5.464000] mov.w
[ 5.464000] 800ec224 <cache_alloc_refill+0x368/0x6a0>
[ 5.464000] ,
[ 5.464000] r1
[ 5.464000] ! 00000400 <0x400>
[ 5.464000]
[ 5.464000] 800ec0d6:
[ 5.464000] mov
[ 5.464000] r13
[ 5.464000] ,
[ 5.464000] r2
[ 5.464000]
[ 5.464000] 800ec0d8:
[ 5.464000] mov.l
[ 5.464000] 800ec238 <cache_alloc_refill+0x37c/0x6a0>
[ 5.464000] ,
[ 5.464000] r12
[ 5.464000] ! 003beee0 <0x3beee0>
[ 5.464000]
[ 5.464000] 800ec0da:
[ 5.464000] and
[ 5.464000] r1
[ 5.464000] ,
[ 5.464000] r2
[ 5.464000]
[ 5.464000] 800ec0dc:
[ 5.464000] tst
[ 5.464000] r1
[ 5.464000] ,
[ 5.464000] r13
[ 5.464000]
[ 5.464000]
[ 5.464000] ---[ end trace 8fe2f9c439309f6b ]---
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer - glaubitz@debian.org
`. `' Freie Universitaet Berlin - glaubitz@physik.fu-berlin.de
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
next prev parent reply other threads:[~2020-07-14 23:12 UTC|newest]
Thread overview: 163+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-24 16:26 ioremap and dma cleanups and fixes for superh Christoph Hellwig
2020-03-24 16:26 ` Christoph Hellwig
2020-03-24 16:26 ` [PATCH 01/10] sh: remove -Werror from Makefiles Christoph Hellwig
2020-03-24 16:26 ` Christoph Hellwig
2020-03-24 16:26 ` [PATCH 02/10] sh: sort the selects for SUPERH alphabetically Christoph Hellwig
2020-03-24 16:26 ` Christoph Hellwig
2020-03-24 16:26 ` [PATCH 03/10] sh: remove __KERNEL__ ifdefs from non-UAPI headers Christoph Hellwig
2020-03-24 16:26 ` Christoph Hellwig
2020-03-24 16:26 ` [PATCH 04/10] sh: move ioremap_fixed details out of <asm/io.h> Christoph Hellwig
2020-03-24 16:26 ` Christoph Hellwig
2020-03-24 16:26 ` [PATCH 05/10] sh: move the ioremap implementation out of line Christoph Hellwig
2020-03-24 16:26 ` Christoph Hellwig
2020-03-24 16:26 ` [PATCH 06/10] sh: don't include <asm/io_trapped.h> in <asm/io.h> Christoph Hellwig
2020-03-24 16:26 ` Christoph Hellwig
2020-03-24 16:26 ` [PATCH 07/10] sh: unexport register_trapped_io and match_trapped_io_handler Christoph Hellwig
2020-03-24 16:26 ` Christoph Hellwig
2020-03-24 16:26 ` [PATCH 08/10] dma-mapping: consolidate the NO_DMA definition in kernel/dma/Kconfig Christoph Hellwig
2020-03-24 16:26 ` Christoph Hellwig
2020-03-24 16:26 ` [PATCH 09/10] sh: don't allow non-coherent DMA for NOMMU Christoph Hellwig
2020-03-24 16:26 ` Christoph Hellwig
2020-03-24 16:26 ` [PATCH 10/10] sh: use the generic dma coherent remap allocator Christoph Hellwig
2020-03-24 16:26 ` Christoph Hellwig
2020-06-26 8:07 ` ioremap and dma cleanups and fixes for superh (resend) Christoph Hellwig
2020-06-26 8:07 ` Christoph Hellwig
2020-06-26 8:07 ` [PATCH 01/10] sh: remove -Werror from Makefiles Christoph Hellwig
2020-06-26 8:07 ` Christoph Hellwig
2020-06-26 8:07 ` [PATCH 02/10] sh: sort the selects for SUPERH alphabetically Christoph Hellwig
2020-06-26 8:07 ` Christoph Hellwig
2020-06-26 8:07 ` [PATCH 03/10] sh: remove __KERNEL__ ifdefs from non-UAPI headers Christoph Hellwig
2020-06-26 8:07 ` Christoph Hellwig
2020-06-26 8:07 ` [PATCH 04/10] sh: move ioremap_fixed details out of <asm/io.h> Christoph Hellwig
2020-06-26 8:07 ` Christoph Hellwig
2020-06-26 8:07 ` [PATCH 05/10] sh: move the ioremap implementation out of line Christoph Hellwig
2020-06-26 8:07 ` Christoph Hellwig
2020-06-26 8:07 ` [PATCH 06/10] sh: don't include <asm/io_trapped.h> in <asm/io.h> Christoph Hellwig
2020-06-26 8:07 ` Christoph Hellwig
2020-06-26 8:07 ` [PATCH 07/10] sh: unexport register_trapped_io and match_trapped_io_handler Christoph Hellwig
2020-06-26 8:07 ` Christoph Hellwig
2020-06-26 8:07 ` [PATCH 08/10] dma-mapping: consolidate the NO_DMA definition in kernel/dma/Kconfig Christoph Hellwig
2020-06-26 8:07 ` Christoph Hellwig
2020-06-26 8:07 ` [PATCH 09/10] sh: don't allow non-coherent DMA for NOMMU Christoph Hellwig
2020-06-26 8:07 ` Christoph Hellwig
2020-06-28 0:53 ` Rob Landley
2020-06-28 1:01 ` Rob Landley
2020-06-28 7:24 ` Christoph Hellwig
2020-06-28 7:24 ` Christoph Hellwig
2020-06-26 8:07 ` [PATCH 10/10] sh: use the generic dma coherent remap allocator Christoph Hellwig
2020-06-26 8:07 ` Christoph Hellwig
2020-07-14 12:18 ` ioremap and dma cleanups and fixes for superh (2nd resend) Christoph Hellwig
2020-07-14 12:18 ` Christoph Hellwig
2020-07-14 12:18 ` [PATCH 01/10] sh: remove -Werror from Makefiles Christoph Hellwig
2020-07-14 12:18 ` Christoph Hellwig
2020-07-14 12:18 ` [PATCH 02/10] sh: sort the selects for SUPERH alphabetically Christoph Hellwig
2020-07-14 12:18 ` Christoph Hellwig
2020-07-14 12:18 ` [PATCH 03/10] sh: remove __KERNEL__ ifdefs from non-UAPI headers Christoph Hellwig
2020-07-14 12:18 ` Christoph Hellwig
2020-07-14 12:18 ` [PATCH 04/10] sh: move ioremap_fixed details out of <asm/io.h> Christoph Hellwig
2020-07-14 12:18 ` Christoph Hellwig
2020-07-14 12:18 ` [PATCH 05/10] sh: move the ioremap implementation out of line Christoph Hellwig
2020-07-14 12:18 ` Christoph Hellwig
2020-07-14 12:18 ` [PATCH 06/10] sh: don't include <asm/io_trapped.h> in <asm/io.h> Christoph Hellwig
2020-07-14 12:18 ` Christoph Hellwig
2020-07-14 12:18 ` [PATCH 07/10] sh: unexport register_trapped_io and match_trapped_io_handler Christoph Hellwig
2020-07-14 12:18 ` Christoph Hellwig
2020-07-14 12:18 ` [PATCH 08/10] dma-mapping: consolidate the NO_DMA definition in kernel/dma/Kconfig Christoph Hellwig
2020-07-14 12:18 ` Christoph Hellwig
2020-07-21 3:17 ` Rich Felker
2020-07-21 3:17 ` Rich Felker
2020-07-21 5:11 ` Christoph Hellwig
2020-07-21 5:11 ` Christoph Hellwig
2020-07-22 0:43 ` Rich Felker
2020-07-22 0:43 ` Rich Felker
2020-07-14 12:18 ` [PATCH 09/10] sh: don't allow non-coherent DMA for NOMMU Christoph Hellwig
2020-07-14 12:18 ` Christoph Hellwig
2020-08-28 2:00 ` Rich Felker
2020-08-28 2:00 ` Rich Felker
2020-08-28 2:11 ` Rich Felker
2020-08-28 2:11 ` Rich Felker
2020-08-28 4:24 ` Christoph Hellwig
2020-08-28 4:24 ` Christoph Hellwig
2020-08-28 9:26 ` Ulf Hansson
2020-08-28 9:26 ` Ulf Hansson
2020-08-28 15:09 ` Rich Felker
2020-08-28 15:09 ` Rich Felker
2020-08-29 8:31 ` Christoph Hellwig
2020-08-29 8:31 ` Christoph Hellwig
2020-08-31 11:28 ` Ulf Hansson
2020-08-31 11:28 ` Ulf Hansson
2020-07-14 12:18 ` [PATCH 10/10] sh: use the generic dma coherent remap allocator Christoph Hellwig
2020-07-14 12:18 ` Christoph Hellwig
2020-07-14 12:31 ` ioremap and dma cleanups and fixes for superh (2nd resend) John Paul Adrian Glaubitz
2020-07-14 12:31 ` John Paul Adrian Glaubitz
2020-07-14 15:59 ` Rich Felker
2020-07-14 15:59 ` Rich Felker
2020-07-14 16:10 ` John Paul Adrian Glaubitz
2020-07-14 16:10 ` John Paul Adrian Glaubitz
2020-07-14 23:12 ` John Paul Adrian Glaubitz [this message]
2020-07-14 23:12 ` John Paul Adrian Glaubitz
2020-07-14 23:14 ` John Paul Adrian Glaubitz
2020-07-14 23:14 ` John Paul Adrian Glaubitz
2020-07-15 3:12 ` Rich Felker
2020-07-15 3:12 ` Rich Felker
2020-07-15 6:39 ` John Paul Adrian Glaubitz
2020-07-15 6:39 ` John Paul Adrian Glaubitz
2020-07-15 7:27 ` Geert Uytterhoeven
2020-07-15 7:27 ` Geert Uytterhoeven
2020-07-15 7:37 ` John Paul Adrian Glaubitz
2020-07-15 7:37 ` John Paul Adrian Glaubitz
2020-07-15 8:06 ` Geert Uytterhoeven
2020-07-15 8:06 ` Geert Uytterhoeven
2020-07-15 7:46 ` John Paul Adrian Glaubitz
2020-07-15 7:46 ` John Paul Adrian Glaubitz
2020-07-15 7:51 ` John Paul Adrian Glaubitz
2020-07-15 8:11 ` Geert Uytterhoeven
2020-07-15 8:11 ` Geert Uytterhoeven
2020-07-15 8:27 ` John Paul Adrian Glaubitz
2020-07-15 8:27 ` John Paul Adrian Glaubitz
2020-07-15 14:37 ` John Paul Adrian Glaubitz
2020-07-15 14:37 ` John Paul Adrian Glaubitz
2020-07-15 15:39 ` John Paul Adrian Glaubitz
2020-07-15 15:39 ` John Paul Adrian Glaubitz
2020-07-15 16:18 ` John Paul Adrian Glaubitz
2020-07-15 16:18 ` John Paul Adrian Glaubitz
2020-07-15 18:21 ` Geert Uytterhoeven
2020-07-15 18:21 ` Geert Uytterhoeven
2020-07-15 18:27 ` John Paul Adrian Glaubitz
2020-07-15 18:27 ` John Paul Adrian Glaubitz
2020-07-16 9:40 ` Peter Zijlstra
2020-07-16 9:40 ` Peter Zijlstra
2020-07-16 10:05 ` John Paul Adrian Glaubitz
2020-07-16 10:05 ` John Paul Adrian Glaubitz
2020-07-16 10:29 ` peterz
2020-07-16 10:29 ` peterz
2020-07-16 10:54 ` John Paul Adrian Glaubitz
2020-07-16 10:54 ` John Paul Adrian Glaubitz
2020-07-16 11:01 ` peterz
2020-07-16 11:01 ` peterz
2020-07-16 11:03 ` John Paul Adrian Glaubitz
2020-07-16 11:03 ` John Paul Adrian Glaubitz
2020-07-16 11:37 ` peterz
2020-07-16 11:37 ` peterz
2020-07-16 12:04 ` peterz
2020-07-16 12:04 ` peterz
2020-07-16 18:14 ` John Paul Adrian Glaubitz
2020-07-16 18:14 ` John Paul Adrian Glaubitz
2020-07-16 19:28 ` Peter Zijlstra
2020-07-16 19:28 ` Peter Zijlstra
2020-07-16 19:33 ` John Paul Adrian Glaubitz
2020-07-16 19:33 ` John Paul Adrian Glaubitz
2020-07-16 11:30 ` John Paul Adrian Glaubitz
2020-07-16 11:30 ` John Paul Adrian Glaubitz
2020-07-15 8:07 ` Geert Uytterhoeven
2020-07-15 8:07 ` Geert Uytterhoeven
2020-07-16 11:31 ` John Paul Adrian Glaubitz
2020-07-16 11:31 ` John Paul Adrian Glaubitz
2020-07-20 13:38 ` Christoph Hellwig
2020-07-20 13:38 ` Christoph Hellwig
2020-07-20 13:42 ` John Paul Adrian Glaubitz
2020-07-20 13:42 ` John Paul Adrian Glaubitz
2020-07-20 14:53 ` Rich Felker
2020-07-20 14:53 ` Rich Felker
2020-07-21 3:20 ` Rich Felker
2020-07-21 3:20 ` Rich Felker
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=011f29e6-ad71-366e-dbff-bc8471f3da60@physik.fu-berlin.de \
--to=glaubitz@physik.fu-berlin.de \
--cc=dalias@libc.org \
--cc=hch@lst.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sh@vger.kernel.org \
--cc=ysato@users.sourceforge.jp \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.