From: Alejandro <atafalla@dnyon.com> To: Liam Girdwood <lgirdwood@gmail.com>, Mark Brown <broonie@kernel.org>, Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Alejandro Tafalla <atafalla@dnyon.com>, Rob Herring <robh+dt@kernel.org>, Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>, alsa-devel@alsa-project.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH v3 1/2] ASoC: max98927: Handle reset gpio when probing i2c Date: Fri, 3 Sep 2021 03:49:50 +0200 [thread overview] Message-ID: <04a18f4115539752429da55fb857834cea0944e5.1630632805.git.atafalla@dnyon.com> (raw) In-Reply-To: <cover.1630632805.git.atafalla@dnyon.com> From: Alejandro Tafalla <atafalla@dnyon.com> Drive the reset gpio if defined in the DTS node. Signed-off-by: Alejandro Tafalla <atafalla@dnyon.com> --- sound/soc/codecs/max98927.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/sound/soc/codecs/max98927.c b/sound/soc/codecs/max98927.c index 8b206ee77709..daf06b503433 100644 --- a/sound/soc/codecs/max98927.c +++ b/sound/soc/codecs/max98927.c @@ -868,6 +868,7 @@ static int max98927_i2c_probe(struct i2c_client *i2c, int ret = 0, value; int reg = 0; struct max98927_priv *max98927 = NULL; + struct gpio_desc *reset_gpio; max98927 = devm_kzalloc(&i2c->dev, sizeof(*max98927), GFP_KERNEL); @@ -898,6 +899,19 @@ static int max98927_i2c_probe(struct i2c_client *i2c, return ret; } + reset_gpio + = devm_gpiod_get_optional(&i2c->dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(reset_gpio)) { + ret = PTR_ERR(reset_gpio); + return dev_err_probe(&i2c->dev, ret, "failed to request GPIO reset pin"); + } + + if (reset_gpio) { + usleep_range(8000, 10000); + gpiod_set_value_cansleep(reset_gpio, 1); + usleep_range(1000, 5000); + } + /* Check Revision ID */ ret = regmap_read(max98927->regmap, MAX98927_R01FF_REV_ID, ®); -- 2.33.0
WARNING: multiple messages have this Message-ID (diff)
From: Alejandro <atafalla@dnyon.com> To: Liam Girdwood <lgirdwood@gmail.com>, Mark Brown <broonie@kernel.org>, Andy Shevchenko <andy.shevchenko@gmail.com> Cc: devicetree@vger.kernel.org, alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org, Takashi Iwai <tiwai@suse.com>, Rob Herring <robh+dt@kernel.org>, Alejandro Tafalla <atafalla@dnyon.com> Subject: [PATCH v3 1/2] ASoC: max98927: Handle reset gpio when probing i2c Date: Fri, 3 Sep 2021 03:49:50 +0200 [thread overview] Message-ID: <04a18f4115539752429da55fb857834cea0944e5.1630632805.git.atafalla@dnyon.com> (raw) In-Reply-To: <cover.1630632805.git.atafalla@dnyon.com> From: Alejandro Tafalla <atafalla@dnyon.com> Drive the reset gpio if defined in the DTS node. Signed-off-by: Alejandro Tafalla <atafalla@dnyon.com> --- sound/soc/codecs/max98927.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/sound/soc/codecs/max98927.c b/sound/soc/codecs/max98927.c index 8b206ee77709..daf06b503433 100644 --- a/sound/soc/codecs/max98927.c +++ b/sound/soc/codecs/max98927.c @@ -868,6 +868,7 @@ static int max98927_i2c_probe(struct i2c_client *i2c, int ret = 0, value; int reg = 0; struct max98927_priv *max98927 = NULL; + struct gpio_desc *reset_gpio; max98927 = devm_kzalloc(&i2c->dev, sizeof(*max98927), GFP_KERNEL); @@ -898,6 +899,19 @@ static int max98927_i2c_probe(struct i2c_client *i2c, return ret; } + reset_gpio + = devm_gpiod_get_optional(&i2c->dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(reset_gpio)) { + ret = PTR_ERR(reset_gpio); + return dev_err_probe(&i2c->dev, ret, "failed to request GPIO reset pin"); + } + + if (reset_gpio) { + usleep_range(8000, 10000); + gpiod_set_value_cansleep(reset_gpio, 1); + usleep_range(1000, 5000); + } + /* Check Revision ID */ ret = regmap_read(max98927->regmap, MAX98927_R01FF_REV_ID, ®); -- 2.33.0
next prev parent reply other threads:[~2021-09-03 1:51 UTC|newest] Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-09-03 1:49 [PATCH v3 0/2] Add reset-gpios handling for max98927 Alejandro 2021-09-03 1:49 ` Alejandro 2021-09-03 1:49 ` Alejandro [this message] 2021-09-03 1:49 ` [PATCH v3 1/2] ASoC: max98927: Handle reset gpio when probing i2c Alejandro 2021-09-03 8:18 ` Andy Shevchenko 2021-09-03 8:18 ` Andy Shevchenko 2021-09-03 15:52 ` Alejandro Tafalla 2021-09-03 15:52 ` Alejandro Tafalla 2021-09-03 9:20 ` Péter Ujfalusi 2021-09-03 9:20 ` Péter Ujfalusi 2021-09-03 23:22 ` Alejandro Tafalla 2021-09-03 23:22 ` Alejandro Tafalla 2021-09-03 1:49 ` [PATCH v3 2/2] dt-bindings: sound: max98927: Add reset-gpios optional property Alejandro 2021-09-03 1:49 ` Alejandro 2021-09-03 17:41 ` Rob Herring 2021-09-03 17:41 ` Rob Herring 2021-09-03 17:58 ` Alejandro Tafalla 2021-09-03 17:58 ` Alejandro Tafalla 2021-09-03 8:16 ` [PATCH v3 0/2] Add reset-gpios handling for max98927 Andy Shevchenko 2021-09-03 8:16 ` Andy Shevchenko 2021-09-03 16:02 ` Alejandro Tafalla 2021-09-03 16:02 ` Alejandro Tafalla
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=04a18f4115539752429da55fb857834cea0944e5.1630632805.git.atafalla@dnyon.com \ --to=atafalla@dnyon.com \ --cc=alsa-devel@alsa-project.org \ --cc=andy.shevchenko@gmail.com \ --cc=broonie@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=lgirdwood@gmail.com \ --cc=linux-kernel@vger.kernel.org \ --cc=perex@perex.cz \ --cc=robh+dt@kernel.org \ --cc=tiwai@suse.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.