From: Damien Le Moal <damien.lemoal@opensource.wdc.com>
To: marius@psihoexpert.ro
Cc: linux-ide@vger.kernel.org
Subject: Re: Bug report for ahci-mvebu driver
Date: Mon, 30 Jan 2023 16:37:15 +0900 [thread overview]
Message-ID: <071bf5d4-4007-6779-60fd-82ec58dd44fe@opensource.wdc.com> (raw)
In-Reply-To: <9490768bca8f5a213d89214ca9324fa0@psihoexpert.ro>
On 1/30/23 16:23, marius@psihoexpert.ro wrote:
> January 30, 2023 4:39 AM, "Damien Le Moal" <damien.lemoal@opensource.wdc.com> wrote:
>>
>> Apologies for asking you to test again, but could you try this simpler
>> version of the initial tweak:
>>
>> diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
>> index 884ae73b11ea..2ea572628b1c 100644
>> --- a/drivers/ata/libata-core.c
>> +++ b/drivers/ata/libata-core.c
>> @@ -3109,7 +3109,7 @@ int sata_down_spd_limit(struct ata_link *link, u32
>> spd_limit)
>> */
>> if (spd > 1)
>> mask &= (1 << (spd - 1)) - 1;
>> - else
>> + else if (link->sata_spd)
>> return -EINVAL;
>>
>> /* were we already at the bottom? */
>>
>> This is a partial revert of the commit that created the issue in the
>> first place. But better check this is OK.
>>
>> --
>> Damien Le Moal
>> Western Digital Research
>
> No problem. I'll test everything until you find the best possible fix for the kernel.
>
> It works:
Perfect. I prefer this version of the fix as it actually does *exactly* what the
comment above the if/else hunk says, that is not force 1.5gbps speed if we
already have a recorded speed. But in your case, we do not have a recorded speed
(link->sata_spd == 0), so retrying with 1.5gbps is the right thing to do.
I will write a nice commit message and post.
Thanks for testing.
>
> [ 15.805656][ T113] hardreset, Online=>Offline
> [ 15.805666][ T113] sata_set_spd_needed, scontrol=0x300
> [ 15.810139][ T113] __sata_set_spd_needed, initial limit=0xFFFFFFFF
> [ 15.815417][ T113] __sata_set_spd_needed, corrected limit=0xFFFFFFFF
> [ 15.821719][ T113] __sata_set_spd_needed, target=0x0
> [ 15.828208][ T113] __sata_set_spd_needed, spd=0x0
> [ 15.833289][ T113] __sata_set_spd_needed, final *scontrol=0x300
> [ 15.839192][ T113] resume, do loop
> [ 16.073861][ T113] resume, after do loop
> [ 16.133861][ T113] debounce, SCR=0x100
> [ 16.193860][ T113] debounce, SCR=0x100
> [ 16.253860][ T113] debounce, SCR=0x100
> [ 16.313860][ T113] debounce, SCR=0x100
> [ 16.373861][ T113] debounce, SCR=0x100
> [ 16.433860][ T113] debounce, SCR=0x100
> [ 16.493860][ T113] debounce, SCR=0x100
> [ 16.553882][ T113] debounce, SCR=0x100
> [ 16.613861][ T113] debounce, SCR=0x100
> [ 16.617722][ T113] resume, return at end of function
> [ 16.621581][ T113] hardreset, ata_phys_link_offline check failed
> [ 16.626685][ T113] ata2: SATA link down (SStatus 101 SControl 300)
> [ 16.639152][ T113] sata_down_spd_limit: limit 0x1, cur spd 0x0, saved limit 0xffffffff, hw limit 0xffffffff
> [ 16.649046][ T113] ata2: limiting SATA link speed to 1.5 Gbps
> [ 16.654931][ T113] hardreset, Online=>Offline
> [ 16.654937][ T113] sata_set_spd_needed, scontrol=0x300
> [ 16.659407][ T113] __sata_set_spd_needed, initial limit=0x1
> [ 16.664675][ T113] __sata_set_spd_needed, corrected limit=0x1
> [ 16.670364][ T113] __sata_set_spd_needed, target=0x1
> [ 16.676249][ T113] __sata_set_spd_needed, spd=0x0
> [ 16.681329][ T113] __sata_set_spd_needed, final *scontrol=0x310
> [ 16.686160][ T113] __sata_set_spd_needed, initial limit=0x1
> [ 16.692200][ T113] __sata_set_spd_needed, corrected limit=0x1
> [ 16.697902][ T113] __sata_set_spd_needed, target=0x1
> [ 16.703767][ T113] __sata_set_spd_needed, spd=0x0
> [ 16.708858][ T113] __sata_set_spd_needed, final *scontrol=0x314
> [ 16.714748][ T113] resume, do loop
> [ 16.943861][ T113] resume, after do loop
> [ 17.003861][ T113] debounce, SCR=0x113
> [ 17.063882][ T113] debounce, SCR=0x113
> [ 17.123860][ T113] debounce, SCR=0x113
> [ 17.183861][ T113] debounce, SCR=0x113
> [ 17.243860][ T113] debounce, SCR=0x113
> [ 17.303861][ T113] debounce, SCR=0x113
> [ 17.363860][ T113] debounce, SCR=0x113
> [ 17.423860][ T113] debounce, SCR=0x113
> [ 17.483860][ T113] debounce, SCR=0x113
> [ 17.487721][ T113] resume, return at end of function
> [ 17.491580][ T113] hardreset, Offline=>Online
> [ 17.501142][ T113] hardreset, sata_pmp_supported, before check_ready
> [ 17.673864][ T113] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
> [ 17.687589][ T113] ata2.15: Port Multiplier 1.2, 0x197b:0x0325 r193, 8 ports, feat 0xf/0x1f
> [ 17.696209][ T113] device: 'link2.0': device_add
> [ 17.701015][ T113] device: 'link2.0': device_add
> [ 17.706001][ T113] device: 'dev2.0.0': device_add
> [ 17.710846][ T113] device: 'dev2.0.0': device_add
> [ 17.715847][ T113] device: 'link2.1': device_add
> [ 17.720606][ T113] device: 'link2.1': device_add
> [ 17.725467][ T113] device: 'dev2.1.0': device_add
> [ 17.730312][ T113] device: 'dev2.1.0': device_add
> [ 17.735299][ T113] device: 'link2.2': device_add
> [ 17.740056][ T113] device: 'link2.2': device_add
> [ 17.744909][ T113] device: 'dev2.2.0': device_add
> [ 17.749754][ T113] device: 'dev2.2.0': device_add
> [ 17.754725][ T113] device: 'link2.3': device_add
> [ 17.759483][ T113] device: 'link2.3': device_add
> [ 17.764355][ T113] device: 'dev2.3.0': device_add
> [ 17.769200][ T113] device: 'dev2.3.0': device_add
> [ 17.774175][ T113] device: 'link2.4': device_add
> [ 17.778934][ T113] device: 'link2.4': device_add
> [ 17.783773][ T113] device: 'dev2.4.0': device_add
> [ 17.788635][ T113] device: 'dev2.4.0': device_add
> [ 17.793605][ T113] device: 'link2.5': device_add
> [ 17.798397][ T113] device: 'link2.5': device_add
> [ 17.803238][ T113] device: 'dev2.5.0': device_add
> [ 17.808100][ T113] device: 'dev2.5.0': device_add
> [ 17.813066][ T113] device: 'link2.6': device_add
> [ 17.817848][ T113] device: 'link2.6': device_add
> [ 17.822690][ T113] device: 'dev2.6.0': device_add
> [ 17.827552][ T113] device: 'dev2.6.0': device_add
> [ 17.832512][ T113] device: 'link2.7': device_add
> [ 17.837289][ T113] device: 'link2.7': device_add
> [ 17.842138][ T113] device: 'dev2.7.0': device_add
> [ 17.847004][ T113] device: 'dev2.7.0': device_add
> [ 17.851966][ T113] device: 'link2.8': device_add
> [ 17.856752][ T113] device: 'link2.8': device_add
> [ 17.861597][ T113] device: 'dev2.8.0': device_add
> [ 17.866464][ T113] device: 'dev2.8.0': device_add
> [ 17.871435][ T113] device: 'link2.9': device_add
> [ 17.876216][ T113] device: 'link2.9': device_add
> [ 17.881061][ T113] device: 'dev2.9.0': device_add
> [ 17.885928][ T113] device: 'dev2.9.0': device_add
> [ 17.890893][ T113] device: 'link2.10': device_add
> [ 17.895761][ T113] device: 'link2.10': device_add
> [ 17.900708][ T113] device: 'dev2.10.0': device_add
> [ 17.905665][ T113] device: 'dev2.10.0': device_add
> [ 17.910720][ T113] device: 'link2.11': device_add
> [ 17.915597][ T113] device: 'link2.11': device_add
> [ 17.920539][ T113] device: 'dev2.11.0': device_add
> [ 17.925497][ T113] device: 'dev2.11.0': device_add
> [ 17.930558][ T113] device: 'link2.12': device_add
> [ 17.935429][ T113] device: 'link2.12': device_add
> [ 17.940366][ T113] device: 'dev2.12.0': device_add
> [ 17.945324][ T113] device: 'dev2.12.0': device_add
> [ 17.950393][ T113] device: 'link2.13': device_add
> [ 17.955265][ T113] device: 'link2.13': device_add
> [ 17.960203][ T113] device: 'dev2.13.0': device_add
> [ 17.965163][ T113] device: 'dev2.13.0': device_add
> [ 17.970219][ T113] device: 'link2.14': device_add
> [ 17.975099][ T113] device: 'link2.14': device_add
> [ 17.980046][ T113] device: 'dev2.14.0': device_add
> [ 17.985007][ T113] device: 'dev2.14.0': device_add
> [ 17.990061][ T113] ahci-mvebu f10a8000.sata: FBS is enabled
> [ 17.995812][ T113] ata2.00: SCR_CONTROL = 0x300
> [ 18.000492][ T113] ata2.01: SCR_CONTROL = 0x300
> [ 18.005195][ T113] ata2.02: SCR_CONTROL = 0x300
> [ 18.009873][ T113] ata2.03: SCR_CONTROL = 0x300
> [ 18.014580][ T113] ata2.04: SCR_CONTROL = 0x300
> [ 18.019257][ T113] ata2.05: SCR_CONTROL = 0x300
> [ 18.023998][ T113] ata2.06: SCR_CONTROL = 0x300
> [ 18.028676][ T113] ata2.07: SCR_CONTROL = 0x300
> [ 18.033427][ T113] ata2.00: hard resetting link
> [ 18.038105][ T113] hardreset, Online=>Offline
> [ 18.038144][ T113] sata_set_spd_needed, scontrol=0x300
> [ 18.042615][ T113] __sata_set_spd_needed, initial limit=0xFFFFFFFF
> [ 18.047892][ T113] __sata_set_spd_needed, corrected limit=0x1
> [ 18.054208][ T113] __sata_set_spd_needed, target=0x1
> [ 18.060072][ T113] __sata_set_spd_needed, spd=0x0
> [ 18.065164][ T113] __sata_set_spd_needed, final *scontrol=0x310
> [ 18.070076][ T113] __sata_set_spd_needed, initial limit=0xFFFFFFFF
> [ 18.076145][ T113] __sata_set_spd_needed, corrected limit=0x1
> [ 18.082447][ T113] __sata_set_spd_needed, target=0x1
> [ 18.088325][ T113] __sata_set_spd_needed, spd=0x0
> [ 18.093406][ T113] __sata_set_spd_needed, final *scontrol=0x310
> [ 18.099473][ T113] resume, do loop
> [ 18.333896][ T113] resume, after do loop
> [ 18.342538][ T113] debounce, SCR=0x123
> [ 18.351693][ T113] debounce, SCR=0x123
> [ 18.360674][ T113] debounce, SCR=0x123
> [ 18.369653][ T113] debounce, SCR=0x123
> [ 18.378614][ T113] debounce, SCR=0x123
> [ 18.387574][ T113] debounce, SCR=0x123
> [ 18.396533][ T113] debounce, SCR=0x123
> [ 18.405493][ T113] debounce, SCR=0x123
> [ 18.414452][ T113] debounce, SCR=0x123
> [ 18.423411][ T113] debounce, SCR=0x123
> [ 18.432390][ T113] debounce, SCR=0x123
> [ 18.441371][ T113] debounce, SCR=0x123
> [ 18.445312][ T113] resume, return at end of function
> [ 18.449202][ T113] hardreset, Offline=>Online
> [ 18.458767][ T113] hardreset, after check_ready
> [ 18.458984][ T113] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 18.470857][ T113] ata2.01: hard resetting link
> [ 18.475524][ T113] hardreset, Online=>Offline
> [ 18.475562][ T113] sata_set_spd_needed, scontrol=0x300
> [ 18.480032][ T113] __sata_set_spd_needed, initial limit=0xFFFFFFFF
> [ 18.485305][ T113] __sata_set_spd_needed, corrected limit=0x1
> [ 18.491606][ T113] __sata_set_spd_needed, target=0x1
> [ 18.497484][ T113] __sata_set_spd_needed, spd=0x0
> [ 18.502564][ T113] __sata_set_spd_needed, final *scontrol=0x310
> [ 18.507488][ T113] __sata_set_spd_needed, initial limit=0xFFFFFFFF
> [ 18.513527][ T113] __sata_set_spd_needed, corrected limit=0x1
> [ 18.519847][ T113] __sata_set_spd_needed, target=0x1
> [ 18.525725][ T113] __sata_set_spd_needed, spd=0x0
> [ 18.530804][ T113] __sata_set_spd_needed, final *scontrol=0x310
> [ 18.536834][ T113] resume, do loop
> [ 18.763894][ T113] resume, after do loop
> [ 18.772537][ T113] debounce, SCR=0x123
> [ 18.781691][ T113] debounce, SCR=0x123
> [ 18.790671][ T113] debounce, SCR=0x123
> [ 18.799650][ T113] debounce, SCR=0x123
> [ 18.808610][ T113] debounce, SCR=0x123
> [ 18.817570][ T113] debounce, SCR=0x123
> [ 18.826530][ T113] debounce, SCR=0x123
> [ 18.835489][ T113] debounce, SCR=0x123
> [ 18.844448][ T113] debounce, SCR=0x123
> [ 18.853407][ T113] debounce, SCR=0x123
> [ 18.862386][ T113] debounce, SCR=0x123
> [ 18.871368][ T113] debounce, SCR=0x123
> [ 18.875309][ T113] resume, return at end of function
> [ 18.879199][ T113] hardreset, Offline=>Online
> [ 18.888761][ T113] hardreset, after check_ready
> [ 18.888978][ T113] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 18.900849][ T113] ata2.02: hard resetting link
> [ 18.905516][ T113] hardreset, Online=>Offline
> [ 18.905554][ T113] sata_set_spd_needed, scontrol=0x300
> [ 18.910024][ T113] __sata_set_spd_needed, initial limit=0xFFFFFFFF
> [ 18.915297][ T113] __sata_set_spd_needed, corrected limit=0x1
> [ 18.921598][ T113] __sata_set_spd_needed, target=0x1
> [ 18.927476][ T113] __sata_set_spd_needed, spd=0x0
> [ 18.932555][ T113] __sata_set_spd_needed, final *scontrol=0x310
> [ 18.937478][ T113] __sata_set_spd_needed, initial limit=0xFFFFFFFF
> [ 18.943517][ T113] __sata_set_spd_needed, corrected limit=0x1
> [ 18.949837][ T113] __sata_set_spd_needed, target=0x1
> [ 18.955715][ T113] __sata_set_spd_needed, spd=0x0
> [ 18.960794][ T113] __sata_set_spd_needed, final *scontrol=0x310
> [ 18.966826][ T113] resume, do loop
> [ 19.193895][ T113] resume, after do loop
> [ 19.202536][ T113] debounce, SCR=0x0
> [ 19.211691][ T113] debounce, SCR=0x0
> [ 19.220496][ T113] debounce, SCR=0x0
> [ 19.229301][ T113] debounce, SCR=0x0
> [ 19.238087][ T113] debounce, SCR=0x0
> [ 19.246872][ T113] debounce, SCR=0x0
> [ 19.255658][ T113] debounce, SCR=0x0
> [ 19.264443][ T113] debounce, SCR=0x0
> [ 19.273228][ T113] debounce, SCR=0x0
> [ 19.282034][ T113] debounce, SCR=0x0
> [ 19.290839][ T113] debounce, SCR=0x0
> [ 19.299646][ T113] debounce, SCR=0x0
> [ 19.308430][ T113] debounce, SCR=0x0
> [ 19.312175][ T113] resume, return at end of function
> [ 19.315911][ T113] hardreset, ata_phys_link_offline check failed
> [ 19.321203][ T113] ata2.02: SATA link down (SStatus 0 SControl 300)
> [ 19.333802][ T113] ata2.03: hard resetting link
> [ 19.338467][ T113] hardreset, Online=>Offline
> [ 19.338504][ T113] sata_set_spd_needed, scontrol=0x300
> [ 19.342974][ T113] __sata_set_spd_needed, initial limit=0xFFFFFFFF
> [ 19.348247][ T113] __sata_set_spd_needed, corrected limit=0x1
> [ 19.354562][ T113] __sata_set_spd_needed, target=0x1
> [ 19.360426][ T113] __sata_set_spd_needed, spd=0x0
> [ 19.365526][ T113] __sata_set_spd_needed, final *scontrol=0x310
> [ 19.370436][ T113] __sata_set_spd_needed, initial limit=0xFFFFFFFF
> [ 19.376495][ T113] __sata_set_spd_needed, corrected limit=0x1
> [ 19.382796][ T113] __sata_set_spd_needed, target=0x1
> [ 19.388674][ T113] __sata_set_spd_needed, spd=0x0
> [ 19.393753][ T113] __sata_set_spd_needed, final *scontrol=0x310
> [ 19.399778][ T113] resume, do loop
> [ 19.633894][ T113] resume, after do loop
> [ 19.642535][ T113] debounce, SCR=0x0
> [ 19.651703][ T113] debounce, SCR=0x0
> [ 19.660509][ T113] debounce, SCR=0x0
> [ 19.669314][ T113] debounce, SCR=0x0
> [ 19.678100][ T113] debounce, SCR=0x0
> [ 19.686886][ T113] debounce, SCR=0x0
> [ 19.695671][ T113] debounce, SCR=0x0
> [ 19.704456][ T113] debounce, SCR=0x0
> [ 19.713242][ T113] debounce, SCR=0x0
> [ 19.722048][ T113] debounce, SCR=0x0
> [ 19.730852][ T113] debounce, SCR=0x0
> [ 19.739659][ T113] debounce, SCR=0x0
> [ 19.748444][ T113] debounce, SCR=0x0
> [ 19.752191][ T113] resume, return at end of function
> [ 19.755927][ T113] hardreset, ata_phys_link_offline check failed
> [ 19.761219][ T113] ata2.03: SATA link down (SStatus 0 SControl 300)
> [ 19.773817][ T113] ata2.04: hard resetting link
> [ 19.778481][ T113] hardreset, Online=>Offline
> [ 19.778519][ T113] sata_set_spd_needed, scontrol=0x300
> [ 19.782989][ T113] __sata_set_spd_needed, initial limit=0xFFFFFFFF
> [ 19.788262][ T113] __sata_set_spd_needed, corrected limit=0x1
> [ 19.794577][ T113] __sata_set_spd_needed, target=0x1
> [ 19.800441][ T113] __sata_set_spd_needed, spd=0x0
> [ 19.805541][ T113] __sata_set_spd_needed, final *scontrol=0x310
> [ 19.810452][ T113] __sata_set_spd_needed, initial limit=0xFFFFFFFF
> [ 19.816511][ T113] __sata_set_spd_needed, corrected limit=0x1
> [ 19.822812][ T113] __sata_set_spd_needed, target=0x1
> [ 19.828689][ T113] __sata_set_spd_needed, spd=0x0
> [ 19.833769][ T113] __sata_set_spd_needed, final *scontrol=0x310
> [ 19.839792][ T113] resume, do loop
> [ 20.073895][ T113] resume, after do loop
> [ 20.082536][ T113] debounce, SCR=0x0
> [ 20.091690][ T113] debounce, SCR=0x0
> [ 20.100496][ T113] debounce, SCR=0x0
> [ 20.109301][ T113] debounce, SCR=0x0
> [ 20.118087][ T113] debounce, SCR=0x0
> [ 20.126872][ T113] debounce, SCR=0x0
> [ 20.135658][ T113] debounce, SCR=0x0
> [ 20.144443][ T113] debounce, SCR=0x0
> [ 20.153228][ T113] debounce, SCR=0x0
> [ 20.162047][ T113] debounce, SCR=0x0
> [ 20.170854][ T113] debounce, SCR=0x0
> [ 20.179660][ T113] debounce, SCR=0x0
> [ 20.188447][ T113] debounce, SCR=0x0
> [ 20.192193][ T113] resume, return at end of function
> [ 20.195930][ T113] hardreset, ata_phys_link_offline check failed
> [ 20.201220][ T113] ata2.04: SATA link down (SStatus 0 SControl 300)
> [ 20.213818][ T113] ata2.05: hard resetting link
> [ 20.218483][ T113] hardreset, Online=>Offline
> [ 20.218520][ T113] sata_set_spd_needed, scontrol=0x300
> [ 20.222990][ T113] __sata_set_spd_needed, initial limit=0xFFFFFFFF
> [ 20.228263][ T113] __sata_set_spd_needed, corrected limit=0x1
> [ 20.234578][ T113] __sata_set_spd_needed, target=0x1
> [ 20.240442][ T113] __sata_set_spd_needed, spd=0x0
> [ 20.245542][ T113] __sata_set_spd_needed, final *scontrol=0x310
> [ 20.250452][ T113] __sata_set_spd_needed, initial limit=0xFFFFFFFF
> [ 20.256511][ T113] __sata_set_spd_needed, corrected limit=0x1
> [ 20.262812][ T113] __sata_set_spd_needed, target=0x1
> [ 20.268689][ T113] __sata_set_spd_needed, spd=0x0
> [ 20.273768][ T113] __sata_set_spd_needed, final *scontrol=0x310
> [ 20.279792][ T113] resume, do loop
> [ 20.513895][ T113] resume, after do loop
> [ 20.522535][ T113] debounce, SCR=0x0
> [ 20.531689][ T113] debounce, SCR=0x0
> [ 20.540495][ T113] debounce, SCR=0x0
> [ 20.549300][ T113] debounce, SCR=0x0
> [ 20.558085][ T113] debounce, SCR=0x0
> [ 20.566870][ T113] debounce, SCR=0x0
> [ 20.575657][ T113] debounce, SCR=0x0
> [ 20.584441][ T113] debounce, SCR=0x0
> [ 20.593226][ T113] debounce, SCR=0x0
> [ 20.602031][ T113] debounce, SCR=0x0
> [ 20.610836][ T113] debounce, SCR=0x0
> [ 20.619643][ T113] debounce, SCR=0x0
> [ 20.628429][ T113] debounce, SCR=0x0
> [ 20.632175][ T113] resume, return at end of function
> [ 20.635911][ T113] hardreset, ata_phys_link_offline check failed
> [ 20.641203][ T113] ata2.05: SATA link down (SStatus 0 SControl 300)
> [ 20.653800][ T113] ata2.06: hard resetting link
> [ 20.658466][ T113] hardreset, Online=>Offline
> [ 20.658503][ T113] sata_set_spd_needed, scontrol=0x300
> [ 20.662974][ T113] __sata_set_spd_needed, initial limit=0xFFFFFFFF
> [ 20.668261][ T113] __sata_set_spd_needed, corrected limit=0x1
> [ 20.674576][ T113] __sata_set_spd_needed, target=0x1
> [ 20.680440][ T113] __sata_set_spd_needed, spd=0x0
> [ 20.685539][ T113] __sata_set_spd_needed, final *scontrol=0x310
> [ 20.690451][ T113] __sata_set_spd_needed, initial limit=0xFFFFFFFF
> [ 20.696510][ T113] __sata_set_spd_needed, corrected limit=0x1
> [ 20.702811][ T113] __sata_set_spd_needed, target=0x1
> [ 20.708688][ T113] __sata_set_spd_needed, spd=0x0
> [ 20.713768][ T113] __sata_set_spd_needed, final *scontrol=0x310
> [ 20.719791][ T113] resume, do loop
> [ 20.953895][ T113] resume, after do loop
> [ 20.962536][ T113] debounce, SCR=0x0
> [ 20.971690][ T113] debounce, SCR=0x0
> [ 20.980496][ T113] debounce, SCR=0x0
> [ 20.989301][ T113] debounce, SCR=0x0
> [ 20.998087][ T113] debounce, SCR=0x0
> [ 21.006872][ T113] debounce, SCR=0x0
> [ 21.015657][ T113] debounce, SCR=0x0
> [ 21.024442][ T113] debounce, SCR=0x0
> [ 21.033227][ T113] debounce, SCR=0x0
> [ 21.042033][ T113] debounce, SCR=0x0
> [ 21.050838][ T113] debounce, SCR=0x0
> [ 21.059644][ T113] debounce, SCR=0x0
> [ 21.068429][ T113] debounce, SCR=0x0
> [ 21.072176][ T113] resume, return at end of function
> [ 21.075913][ T113] hardreset, ata_phys_link_offline check failed
> [ 21.081202][ T113] ata2.06: SATA link down (SStatus 0 SControl 300)
> [ 21.093800][ T113] ata2.07: hard resetting link
> [ 21.098465][ T113] hardreset, Online=>Offline
> [ 21.098502][ T113] sata_set_spd_needed, scontrol=0x300
> [ 21.102972][ T113] __sata_set_spd_needed, initial limit=0xFFFFFFFF
> [ 21.108246][ T113] __sata_set_spd_needed, corrected limit=0x1
> [ 21.114560][ T113] __sata_set_spd_needed, target=0x1
> [ 21.120424][ T113] __sata_set_spd_needed, spd=0x0
> [ 21.125524][ T113] __sata_set_spd_needed, final *scontrol=0x310
> [ 21.130435][ T113] __sata_set_spd_needed, initial limit=0xFFFFFFFF
> [ 21.136494][ T113] __sata_set_spd_needed, corrected limit=0x1
> [ 21.142795][ T113] __sata_set_spd_needed, target=0x1
> [ 21.148673][ T113] __sata_set_spd_needed, spd=0x0
> [ 21.153752][ T113] __sata_set_spd_needed, final *scontrol=0x310
> [ 21.159775][ T113] resume, do loop
> [ 21.393895][ T113] resume, after do loop
> [ 21.402537][ T113] debounce, SCR=0x0
> [ 21.411690][ T113] debounce, SCR=0x0
> [ 21.420496][ T113] debounce, SCR=0x0
> [ 21.429300][ T113] debounce, SCR=0x0
> [ 21.438085][ T113] debounce, SCR=0x0
> [ 21.446870][ T113] debounce, SCR=0x0
> [ 21.455656][ T113] debounce, SCR=0x0
> [ 21.464441][ T113] debounce, SCR=0x0
> [ 21.473227][ T113] debounce, SCR=0x0
> [ 21.482032][ T113] debounce, SCR=0x0
> [ 21.490837][ T113] debounce, SCR=0x0
> [ 21.499644][ T113] debounce, SCR=0x0
> [ 21.508430][ T113] debounce, SCR=0x0
> [ 21.512176][ T113] resume, return at end of function
> [ 21.515913][ T113] hardreset, ata_phys_link_offline check failed
> [ 21.521202][ T113] ata2.07: SATA link down (SStatus 0 SControl 300)
> [ 21.533889][ T113] ata2.00: ATA-6: WDC WD50ARC-5040-VOL#01, 0100 AX, max UDMA/133
> [ 21.541502][ T113] ata2.00: 976773168 sectors, multi 0: LBA48
> [ 21.547615][ T113] ata2.00: configured for UDMA/133
> [ 21.552677][ T113] ata2.01: ATA-6: Areca Archive, 0100 AX, max UDMA/133
> [ 21.559611][ T113] ata2.01: 23437498368 sectors, multi 0: LBA48
> [ 21.565886][ T113] ata2.01: configured for UDMA/133
> [ 21.571033][ T113] ata2: EH complete
> [ 21.575491][ T76] scsi 1:0:0:0: Direct-Access ATA WDC WD50ARC-5040 n/a PQ: 0 ANSI: 5
> [ 21.585235][ T76] device: 'target1:0:0': device_add
> [ 21.590356][ T76] bus: 'scsi': add device target1:0:0
> [ 21.595735][ T76] device: '1:0:0:0': device_add
> [ 21.600740][ T76] bus: 'scsi': add device 1:0:0:0
> [ 21.605721][ T76] scsi 1:0:0:0: scheduling asynchronous probe
> [ 21.611719][ T76] device: '1:0:0:0': device_add
> [ 21.611734][ T22] bus: 'scsi': __driver_probe_device: matched device 1:0:0:0 with driver sd
> [ 21.616593][ T76] device: '1:0:0:0': device_add
> [ 21.625099][ T22] bus: 'scsi': really_probe: probing driver sd with device 1:0:0:0
> [ 21.637640][ T22] sd 1:0:0:0: no default pinctrl state
> [ 21.643071][ T22] device: '1:0:0:0': device_add
> [ 21.644450][ T76] scsi 1:1:0:0: Direct-Access ATA Areca Archive n/a PQ: 0 ANSI: 5
> [ 21.648193][ T22] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
> [ 21.657934][ T76] device: 'target1:1:0': device_add
> [ 21.665225][ T22] sd 1:0:0:0: [sdb] Write Protect is off
> [ 21.670030][ T76] bus: 'scsi': add device target1:1:0
> [ 21.675566][ T22] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
> [ 21.680850][ T76] device: '1:1:0:0': device_add
> [ 21.686703][ T22] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 21.691586][ T76] bus: 'scsi': add device 1:1:0:0
> [ 21.701326][ T22] sd 1:0:0:0: [sdb] Preferred minimum I/O size 512 bytes
> [ 21.706077][ T76] scsi 1:1:0:0: scheduling asynchronous probe
> [ 21.712958][ T22] device: 'sdb': device_add
> [ 21.718923][ T76] device: '1:1:0:0': device_add
> [ 21.723651][ T8] bus: 'scsi': __driver_probe_device: matched device 1:1:0:0 with driver sd
> [ 21.728161][ T76] device: '1:1:0:0': device_add
> [ 21.736660][ T8] bus: 'scsi': really_probe: probing driver sd with device 1:1:0:0
> [ 21.749211][ T8] sd 1:1:0:0: no default pinctrl state
> [ 21.754659][ T8] device: '1:1:0:0': device_add
> [ 21.759991][ T22] device: '8:16': device_add
> [ 21.765576][ T8] sd 1:1:0:0: [sdc] 23437498368 512-byte logical blocks: (12.0 TB/10.9 TiB)
> [ 21.774242][ T8] sd 1:1:0:0: [sdc] Write Protect is off
> [ 21.779764][ T8] sd 1:1:0:0: [sdc] Mode Sense: 00 3a 00 00
> [ 21.785698][ T8] sd 1:1:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 21.795680][ T8] sd 1:1:0:0: [sdc] Preferred minimum I/O size 512 bytes
> [ 21.802612][ T8] device: 'sdc': device_add
> [ 21.807704][ T8] device: '8:32': device_add
> [ 21.836417][ T8] sd 1:1:0:0: [sdc] Attached SCSI removable disk
> [ 21.842641][ T8] driver: 'sd': driver_bound: bound to device '1:1:0:0'
> [ 21.849545][ T8] bus: 'scsi': really_probe: bound device 1:1:0:0 to driver sd
> [ 21.857027][ T8] sd 1:1:0:0: async probe completed
> [ 22.253067][ T22] sd 1:0:0:0: [sdb] Attached SCSI removable disk
> [ 22.259320][ T22] driver: 'sd': driver_bound: bound to device '1:0:0:0'
> [ 22.266220][ T22] bus: 'scsi': really_probe: bound device 1:0:0:0 to driver sd
> [ 22.273664][ T22] sd 1:0:0:0: async probe completed
>
>
> I also tested it with the latest kernel, no other modifications
> (commit 6d796c50f84ca79f1722bb131799e5a5710c4700, tag: v6.2-rc6)
> This is the boot log with Areca DAS already connected:
>
> BootROM - 1.73
>
> Booting from NAND flash
>
>
> General initialization - Version: 1.0.0
>
> Detected Device ID 6820
>
> High speed PHY - Version: 2.0
>
>
> Init RD NAS topology Serdes Lane 3 is USB3
>
> Serdes Lane 4 is SGMII
>
> board SerDes lanes topology details:
>
> | Lane # | Speed | Type |
>
> --------------------------------
>
> | 0 | 06 | SATA0 |
>
> | 1 | 05 | PCIe0 |
>
> | 2 | 06 | SATA1 |
>
> | 3 | 05 | USB3 HOST1 |
>
> | 4 | 05 | PCIe1 |
>
> | 5 | 00 | SGMII2 |
>
> --------------------------------
>
> :** Link is Gen1, check the EP capability
>
> PCIe, Idx 0: Link upgraded to Gen2 based on client cpabilities
>
> :** Link is Gen1, check the EP capability
>
> PCIe, Idx 1: remains Gen1
>
> High speed PHY - Ended Successfully
>
> DDR3 Training Sequence - Ver TIP-1.26.0
>
> mvSysEnvGetTopologyUpdateInfo: TWSI Read failed
>
> DDR3 Training Sequence - Switching XBAR Window to FastPath Window
>
> DDR3 Training Sequence - Ended Successfully
>
> Not detected suspend to RAM indication
>
> BootROM: Image checksum verification PASSED
>
> l
> __ __ _ _
> | \/ | __ _ _ ____ _____| | |
> | |\/| |/ _` | '__\ \ / / _ \ | |
> | | | | (_| | | \ V / __/ | |
> |_| |_|\__,_|_| \_/ \___|_|_|
> _ _ ____ _
> | | | | | __ ) ___ ___ | |_
> | | | |___| _ \ / _ \ / _ \| __|
> | |_| |___| |_) | (_) | (_) | |_
> \___/ |____/ \___/ \___/ \__|
> ** LOADER **
>
>
> U-Boot 2013.01 (Mar 27 2015 - 16:50:46) Marvell version: 2014_T3.0p6
>
> Boot version : v1.0.13
>
> Board: RD-NAS-88F6820-DDR3
> SoC: MV88F6820 Rev A0
> running 2 CPUs
> CPU: ARM Cortex A9 MPCore (Rev 1) LE
> CPU 0
> CPU @ 1600 [MHz]
> L2 @ 800 [MHz]
> TClock @ 200 [MHz]
> DDR @ 800 [MHz]
> DDR 32 Bit Width, FastPath Memory Access, DLB Enabled, ECC Disabled
> DRAM: 512 MiB
>
> Map: Code: 0x1fea9000:0x1ff7632c
> BSS: 0x1ffef6b4
> Stack: 0x1f9a8f20
> Heap: 0x1f9a9000:0x1fea9000
> raise: Signal # 8 caught
> U-ENV offset == 0x200000
> raise: Signal # 8 caught
> U-ENV offset == 0x200000
> U-Boot Environment: 0x00200000:0x00220000 (NAND)
>
> NAND: 128 MiB
> MMC: mv_sdh: 0
> DEVINFO offset == 0x900000
> U-ENV offset == 0x200000
> U-ENV offset == 0x200000
> S-ENV offset == 0x240000
>
>
> #### auto_recovery ####
> [u_env] get auto_recovery == yes
> [u_env] get auto_recovery == yes
> [u_env] get boot_part == 2
> [u_env] get boot_part_ready == 3
> auto_recovery enabled:1, boot_part:2, boot_part_ready:3
>
> S-ENV offset == 0x240000
> [boot_count_read] block:0x240000, size:128KB, records:64
> [boot_count_read_record] boot_count:1, next_record:11
>
> [boot_count_write] erase:0, auto_recovery->block_offset:0x240000 offset=0x245800
>
> Updating boot_count ...
> [boot_count_write] offset:0x245800 , length:2048
> done
>
> PCI-e 0 (IF 0 - bus 0) Root Complex Interface, Detected Link X1, GEN 2.0
> PCI-e 1 (IF 1 - bus 1) Root Complex Interface, Detected Link X1, GEN 1.1
> USB2.0 0: Host Mode
> USB3.0 1: Host Mode
> USB3.0 0: Host Mode
> Board configuration detected:
> mvEthE6171SwitchBasicInit init
> Net:
> | port | Interface | PHY address |
> |--------|-----------|--------------|
> | egiga0 | RGMII | 0x01 |
> | egiga1 | SGMII | 0x00 |
> egiga0 [PRIME], egiga1
> auto_recovery_check changes bootcmd: run altnandboot
> Hit any key to stop autoboot: 3
> Marvell>> run bootcmd_tftp
> Using egiga0 device
> TFTP from server 192.168.1.254; our IP address is 192.168.1.1
> Filename 'uImage'.
> Load address: 0x2000000
> Loading: * #################################################################
> #################################################################
> ##########################################################
> 205.1 KiB/s
> done
> Bytes transferred = 2750299 (29f75b hex)
>
> Starting kernel ...
>
> [ 0.000000][ T0] Booting Linux on physical CPU 0x0
> [ 0.000000][ T0] Linux version 6.2.0-rc6-M95D-00001-gd783bde80fb1 (marius95@GRAPHIM) (arm-openwrt-linux-muslgnueabi-gcc (OpenWrt GCC 12.2.0 r21391+9-a8f3c97ce8) 12.2.0, GNU ld (GNU Binutils) 2.39) #1 SMP Mon Jan 30 09:02:19 EET 2023
> [ 0.000000][ T0] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d
> [ 0.000000][ T0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
> [ 0.000000][ T0] OF: fdt: Machine model: Linksys WRT1900ACS
> [ 0.000000][ T0] Memory policy: Data cache writealloc
> [ 0.000000][ T0] Zone ranges:
> [ 0.000000][ T0] Normal [mem 0x0000000000000000-0x000000001fffffff]
> [ 0.000000][ T0] Movable zone start for each node
> [ 0.000000][ T0] Early memory node ranges
> [ 0.000000][ T0] node 0: [mem 0x0000000000000000-0x000000001fffffff]
> [ 0.000000][ T0] Initmem setup node 0 [mem 0x0000000000000000-0x000000001fffffff]
> [ 0.000000][ T0] percpu: Embedded 13 pages/cpu s29648 r0 d23600 u53248
> [ 0.000000][ T0] pcpu-alloc: s29648 r0 d23600 u53248 alloc=13*4096
> [ 0.000000][ T0] pcpu-alloc: [0] 0 [0] 1
> [ 0.000000][ T0] Built 1 zonelists, mobility grouping on. Total pages: 130048
> [ 0.000000][ T0] Kernel command line: console=ttyS0,115200 nfcConfig=4bitecc mtdparts=armada-nand:2048K(uboot)ro,256K(u_env),256K(s_env),1m@9m(devinfo),40m@10m(kernel),34m@16m(rootfs),40m@50m(alt_kernel),34m@56m(alt_rootfs),80m@10m(ubifs),-@90m(syscfg) root=/dev/sda rootdelay=100 dyndbg=\"file *ata* +plmft\"
> [ 0.000000][ T0] Unknown kernel command line parameters "nfcConfig=4bitecc mtdparts=armada-nand:2048K(uboot)ro,256K(u_env),256K(s_env),1m@9m(devinfo),40m@10m(kernel),34m@16m(rootfs),40m@50m(alt_kernel),34m@56m(alt_rootfs),80m@10m(ubifs),-@90m(syscfg)", will be passed to user space.
> [ 0.000000][ T0] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
> [ 0.000000][ T0] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
> [ 0.000000][ T0] mem auto-init: stack:off, heap alloc:off, heap free:off
> [ 0.000000][ T0] Memory: 503304K/524288K available (6144K kernel code, 682K rwdata, 1724K rodata, 1024K init, 6363K bss, 20984K reserved, 0K cma-reserved)
> [ 0.000000][ T0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
> [ 0.000000][ T0] trace event string verifier disabled
> [ 0.000000][ T0] Running RCU self tests
> [ 0.000000][ T0] rcu: Hierarchical RCU implementation.
> [ 0.000000][ T0] rcu: RCU lockdep checking is enabled.
> [ 0.000000][ T0] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
> [ 0.000000][ T0] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
> [ 0.000000][ T0] L2C: DT/platform modifies aux control register: 0x06070000 -> 0x16070000
> [ 0.000000][ T0] L2C-310 enabling early BRESP for Cortex-A9
> [ 0.000000][ T0] L2C-310 full line of zeros enabled for Cortex-A9
> [ 0.000000][ T0] L2C-310 D prefetch enabled, offset 1 lines
> [ 0.000000][ T0] L2C-310 dynamic clock gating enabled, standby mode enabled
> [ 0.000000][ T0] L2C-310 Coherent cache controller enabled, 16 ways, 1024 kB
> [ 0.000000][ T0] L2C-310 Coherent: CACHE_ID 0x410054c9, AUX_CTRL 0x56070001
> [ 0.000000][ T0] rcu: srcu_init: Setting srcu_struct sizes based on contention.
> [ 0.000001][ T0] sched_clock: 64 bits at 800MHz, resolution 1ns, wraps every 4398046511103ns
> [ 0.000013][ T0] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0xb881274fa3, max_idle_ns: 440795210636 ns
> [ 0.000091][ T0] Switching to timer-based delay loop, resolution 1ns
> [ 0.000336][ T0] Ignoring duplicate/late registration of read_current_timer delay
> [ 0.000342][ T0] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
> [ 0.000671][ T0] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
> [ 0.000686][ T0] ... MAX_LOCKDEP_SUBCLASSES: 8
> [ 0.000691][ T0] ... MAX_LOCK_DEPTH: 48
> [ 0.000696][ T0] ... MAX_LOCKDEP_KEYS: 8192
> [ 0.000700][ T0] ... CLASSHASH_SIZE: 4096
> [ 0.000703][ T0] ... MAX_LOCKDEP_ENTRIES: 32768
> [ 0.000707][ T0] ... MAX_LOCKDEP_CHAINS: 65536
> [ 0.000711][ T0] ... CHAINHASH_SIZE: 32768
> [ 0.000715][ T0] memory used by lock dependency info: 4061 kB
> [ 0.000720][ T0] memory used for stack traces: 2112 kB
> [ 0.000724][ T0] per task-struct memory footprint: 1536 bytes
> [ 0.000773][ T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 1600.00 BogoMIPS (lpj=8000000)
> [ 0.000787][ T0] pid_max: default: 32768 minimum: 301
> [ 0.000886][ T0] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
> [ 0.000895][ T0] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
> [ 0.002105][ T0] CPU: Testing write buffer coherency: ok
> [ 0.002168][ T0] Spectre V2: workarounds disabled by configuration
> [ 0.003606][ T1] Setting up static identity map for 0x100000 - 0x100060
> [ 0.003756][ T1] mvebu-soc-id: MVEBU SoC ID=0x6820, Rev=0x4
> [ 0.003891][ T1] mvebu-pmsu: Initializing Power Management Service Unit
> [ 0.004190][ T1] rcu: Hierarchical SRCU implementation.
> [ 0.004196][ T1] rcu: Max phase no-delay instances is 1000.
> [ 0.004870][ T1] dyndbg: unknown flag '\'
> [ 0.004877][ T1] dyndbg: flags parse failed
> [ 0.005143][ T1] smp: Bringing up secondary CPUs ...
> [ 0.006060][ T1] Booting CPU 1
> [ 0.006572][ T1] smp: Brought up 1 node, 2 CPUs
> [ 0.006581][ T1] SMP: Total of 2 processors activated (3200.00 BogoMIPS).
> [ 0.006589][ T1] CPU: All CPU(s) started in SVC mode.
> [ 0.007669][ T1] devtmpfs: initialized
> [ 0.016228][ T1] device: 'platform': device_add
> [ 0.016350][ T1] bus: 'platform': registered
> [ 0.016402][ T1] bus: 'cpu': registered
> [ 0.016418][ T1] device: 'cpu': device_add
> [ 0.016577][ T1] bus: 'container': registered
> [ 0.016586][ T1] device: 'container': device_add
> [ 0.017162][ T1] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
> [ 0.017308][ T1] bus: 'workqueue': registered
> [ 0.017318][ T1] device: 'workqueue': device_add
> [ 0.017863][ T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
> [ 0.017890][ T1] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
> [ 0.018045][ T1] pinctrl core: initialized pinctrl subsystem
> [ 0.018482][ T1] bus: 'gpio': registered
> [ 0.018491][ T1] bus: 'gpio': add driver gpio_stub_drv
> [ 0.018582][ T1] device class 'regulator': registering
> [ 0.018665][ T1] Registering platform device 'reg-dummy'. Parent at platform
> [ 0.018674][ T1] device: 'reg-dummy': device_add
> [ 0.018694][ T1] bus: 'platform': add device reg-dummy
> [ 0.018798][ T1] bus: 'platform': add driver reg-dummy
> [ 0.018817][ T1] bus: 'platform': __driver_probe_device: matched device reg-dummy with driver reg-dummy
> [ 0.018875][ T1] bus: 'platform': really_probe: probing driver reg-dummy with device reg-dummy
> [ 0.018957][ T1] reg-dummy reg-dummy: no default pinctrl state
> [ 0.019076][ T1] regulator-dummy: no parameters, enabled
> [ 0.019088][ T1] device: 'regulator.0': device_add
> [ 0.019451][ T1] driver: 'reg-dummy': driver_bound: bound to device 'reg-dummy'
> [ 0.019504][ T1] bus: 'platform': really_probe: bound device reg-dummy to driver reg-dummy
> [ 0.019630][ T1] bus: 'soc': registered
> [ 0.020109][ T1] DMA: preallocated 256 KiB pool for atomic coherent allocations
> [ 0.020145][ T1] device: 'soc0': device_add
> [ 0.020215][ T1] bus: 'soc': add device soc0
> [ 0.021619][ T1] device class 'bdi': registering
> [ 0.021727][ T1] device class 'gpio': registering
> [ 0.021779][ T1] device class 'pci_bus': registering
> [ 0.021860][ T1] bus: 'pci': registered
> [ 0.021909][ T1] bus: 'pci_express': registered
> [ 0.021917][ T1] device class 'tty': registering
> [ 0.021941][ T1] device class 'devlink': registering
> [ 0.022046][ T1] bus: 'platform': add driver sram
> [ 0.022135][ T1] bus: 'spi': registered
> [ 0.022141][ T1] device class 'spi_master': registering
> [ 0.022231][ T1] bus: 'i2c': registered
> [ 0.022238][ T1] bus: 'i2c': add driver dummy
> [ 0.022359][ T1] thermal_sys: Registered thermal governor 'step_wise'
> [ 0.022365][ T1] device class 'thermal': registering
> [ 0.022520][ T1] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
> [ 0.022529][ T1] hw-breakpoint: maximum watchpoint size is 4 bytes.
> [ 0.022652][ T1] mvebu-pmsu: CPU hotplug support is currently broken on Armada 38x: disabling
> [ 0.022663][ T1] mvebu-pmsu: CPU idle is currently broken on Armada 38x: disabling
> [ 0.022722][ T1] device class 'dma': registering
> [ 0.022894][ T1] bus: 'platform': add driver mvebu-uart-clock
> [ 0.022942][ T1] bus: 'platform': add driver mvebu-uart
> [ 0.023168][ T1] device: 'pmu': device_add
> [ 0.023201][ T1] bus: 'platform': add device pmu
> [ 0.023374][ T1] device: 'soc': device_add
> [ 0.023405][ T1] bus: 'platform': add device soc
> [ 0.023761][ T1] i2c@11000 Linked as a fwnode consumer to pinctrl@18000
> [ 0.026641][ T1] device: 'fff00000.bootrom': device_add
> [ 0.026675][ T1] bus: 'platform': add device fff00000.bootrom
> [ 0.026806][ T1] device: 'soc:internal-regs': device_add
> [ 0.026845][ T1] bus: 'platform': add device soc:internal-regs
> [ 0.027715][ T1] device: 'f1001400.sdramc': device_add
> [ 0.027746][ T1] bus: 'platform': add device f1001400.sdramc
> [ 0.027960][ T1] device: 'f1008000.cache-controller': device_add
> [ 0.027990][ T1] bus: 'platform': add device f1008000.cache-controller
> [ 0.028197][ T1] device: 'f100c000.scu': device_add
> [ 0.028226][ T1] bus: 'platform': add device f100c000.scu
> [ 0.028427][ T1] device: 'f100c200.timer': device_add
> [ 0.028457][ T1] bus: 'platform': add device f100c200.timer
> [ 0.028658][ T1] device: 'f100c600.timer': device_add
> [ 0.028693][ T1] bus: 'platform': add device f100c600.timer
> [ 0.028902][ T1] device: 'f1011000.i2c': device_add
> [ 0.028932][ T1] bus: 'platform': add device f1011000.i2c
> [ 0.029230][ T1] device: 'f1012000.serial': device_add
> [ 0.029260][ T1] bus: 'platform': add device f1012000.serial
> [ 0.029472][ T1] device: 'f1018000.pinctrl': device_add
> [ 0.029501][ T1] bus: 'platform': add device f1018000.pinctrl
> [ 0.029665][ T1] device: 'platform:f1018000.pinctrl--platform:f1011000.i2c': device_add
> [ 0.029921][ T1] devices_kset: Moving f1011000.i2c to end of list
> [ 0.029933][ T1] platform f1011000.i2c: Linked as a consumer to f1018000.pinctrl
> [ 0.029941][ T1] i2c@11000 Dropping the fwnode link to pinctrl@18000
> [ 0.030283][ T1] device: 'f1018100.gpio': device_add
> [ 0.030315][ T1] bus: 'platform': add device f1018100.gpio
> [ 0.030598][ T1] device: 'f1018140.gpio': device_add
> [ 0.030628][ T1] bus: 'platform': add device f1018140.gpio
> [ 0.030835][ T1] device: 'f1018200.system-controller': device_add
> [ 0.030865][ T1] bus: 'platform': add device f1018200.system-controller
> [ 0.031148][ T1] device: 'f1018300.phy': device_add
> [ 0.031189][ T1] bus: 'platform': add device f1018300.phy
> [ 0.031579][ T1] device: 'f1020000.mbus-controller': device_add
> [ 0.031615][ T1] bus: 'platform': add device f1020000.mbus-controller
> [ 0.031896][ T1] device: 'f1020300.timer': device_add
> [ 0.031926][ T1] bus: 'platform': add device f1020300.timer
> [ 0.032273][ T1] device: 'f1020300.watchdog': device_add
> [ 0.032303][ T1] bus: 'platform': add device f1020300.watchdog
> [ 0.032510][ T1] device: 'f1020800.cpurst': device_add
> [ 0.032539][ T1] bus: 'platform': add device f1020800.cpurst
> [ 0.032752][ T1] device: 'f1020d20.mpcore-soc-ctrl': device_add
> [ 0.032783][ T1] bus: 'platform': add device f1020d20.mpcore-soc-ctrl
> [ 0.032998][ T1] device: 'f1021010.coherency-fabric': device_add
> [ 0.033034][ T1] bus: 'platform': add device f1021010.coherency-fabric
> [ 0.033237][ T1] device: 'f1022000.pmsu': device_add
> [ 0.033266][ T1] bus: 'platform': add device f1022000.pmsu
> [ 0.033470][ T1] device: 'f1070000.ethernet': device_add
> [ 0.033500][ T1] bus: 'platform': add device f1070000.ethernet
> [ 0.033715][ T1] device: 'f1034000.ethernet': device_add
> [ 0.033744][ T1] bus: 'platform': add device f1034000.ethernet
> [ 0.033953][ T1] device: 'f1058000.usb': device_add
> [ 0.033983][ T1] bus: 'platform': add device f1058000.usb
> [ 0.034255][ T1] device: 'f1060800.xor': device_add
> [ 0.034291][ T1] bus: 'platform': add device f1060800.xor
> [ 0.034580][ T1] device: 'f1060900.xor': device_add
> [ 0.034610][ T1] bus: 'platform': add device f1060900.xor
> [ 0.034827][ T1] device: 'f1072004.mdio': device_add
> [ 0.034856][ T1] bus: 'platform': add device f1072004.mdio
> [ 0.035117][ T1] device: 'f1090000.crypto': device_add
> [ 0.035146][ T1] bus: 'platform': add device f1090000.crypto
> [ 0.035353][ T1] device: 'f10a8000.sata': device_add
> [ 0.035382][ T1] bus: 'platform': add device f10a8000.sata
> [ 0.035584][ T1] device: 'f10c8000.bm': device_add
> [ 0.035620][ T1] bus: 'platform': add device f10c8000.bm
> [ 0.035904][ T1] device: 'f10e4078.thermal': device_add
> [ 0.035934][ T1] bus: 'platform': add device f10e4078.thermal
> [ 0.036136][ T1] device: 'f10d0000.nand-controller': device_add
> [ 0.036166][ T1] bus: 'platform': add device f10d0000.nand-controller
> [ 0.036534][ T1] device: 'f10f8000.usb3': device_add
> [ 0.036564][ T1] bus: 'platform': add device f10f8000.usb3
> [ 0.036741][ T1] device: 'f1100000.sa-sram0': device_add
> [ 0.036771][ T1] bus: 'platform': add device f1100000.sa-sram0
> [ 0.036847][ T1] bus: 'platform': __driver_probe_device: matched device f1100000.sa-sram0 with driver sram
> [ 0.036859][ T1] bus: 'platform': really_probe: probing driver sram with device f1100000.sa-sram0
> [ 0.036879][ T1] sram f1100000.sa-sram0: no pinctrl handle
> [ 0.037062][ T1] driver: 'sram': driver_bound: bound to device 'f1100000.sa-sram0'
> [ 0.037141][ T1] bus: 'platform': really_probe: bound device f1100000.sa-sram0 to driver sram
> [ 0.037259][ T1] device: 'f1110000.sa-sram1': device_add
> [ 0.037292][ T1] bus: 'platform': add device f1110000.sa-sram1
> [ 0.037359][ T1] bus: 'platform': __driver_probe_device: matched device f1110000.sa-sram1 with driver sram
> [ 0.037369][ T1] bus: 'platform': really_probe: probing driver sram with device f1110000.sa-sram1
> [ 0.037387][ T1] sram f1110000.sa-sram1: no pinctrl handle
> [ 0.037492][ T1] driver: 'sram': driver_bound: bound to device 'f1110000.sa-sram1'
> [ 0.037541][ T1] bus: 'platform': really_probe: bound device f1110000.sa-sram1 to driver sram
> [ 0.037662][ T1] device: 'f1200000.bm-bppi': device_add
> [ 0.037693][ T1] bus: 'platform': add device f1200000.bm-bppi
> [ 0.037759][ T1] bus: 'platform': __driver_probe_device: matched device f1200000.bm-bppi with driver sram
> [ 0.037769][ T1] bus: 'platform': really_probe: probing driver sram with device f1200000.bm-bppi
> [ 0.037787][ T1] sram f1200000.bm-bppi: no pinctrl handle
> [ 0.037897][ T1] driver: 'sram': driver_bound: bound to device 'f1200000.bm-bppi'
> [ 0.037946][ T1] bus: 'platform': really_probe: bound device f1200000.bm-bppi to driver sram
> [ 0.038019][ T1] device: 'soc:pcie': device_add
> [ 0.038051][ T1] bus: 'platform': add device soc:pcie
> [ 0.038193][ T1] device: 'usb3_1-phy': device_add
> [ 0.038223][ T1] bus: 'platform': add device usb3_1-phy
> [ 0.038291][ T1] usb3_1-phy Linked as a fwnode consumer to usb3_1-vbus
> [ 0.038356][ T1] device: 'usb3_1-vbus': device_add
> [ 0.038396][ T1] bus: 'platform': add device usb3_1-vbus
> [ 0.038468][ T1] usb3_1-vbus Linked as a fwnode consumer to pinctrl@18000
> [ 0.038499][ T1] usb3_1-vbus Linked as a fwnode consumer to gpio@18140
> [ 0.038525][ T1] device: 'platform:usb3_1-vbus--platform:usb3_1-phy': device_add
> [ 0.038633][ T1] devices_kset: Moving usb3_1-phy to end of list
> [ 0.038643][ T1] platform usb3_1-phy: Linked as a consumer to usb3_1-vbus
> [ 0.038651][ T1] usb3_1-phy Dropping the fwnode link to usb3_1-vbus
> [ 0.038669][ T1] device: 'platform:f1018140.gpio--platform:usb3_1-vbus': device_add
> [ 0.038771][ T1] devices_kset: Moving usb3_1-vbus to end of list
> [ 0.038780][ T1] devices_kset: Moving usb3_1-phy to end of list
> [ 0.038789][ T1] platform usb3_1-vbus: Linked as a consumer to f1018140.gpio
> [ 0.038796][ T1] usb3_1-vbus Dropping the fwnode link to gpio@18140
> [ 0.038815][ T1] device: 'platform:f1018000.pinctrl--platform:usb3_1-vbus': device_add
> [ 0.038924][ T1] devices_kset: Moving usb3_1-vbus to end of list
> [ 0.038933][ T1] devices_kset: Moving usb3_1-phy to end of list
> [ 0.038942][ T1] platform usb3_1-vbus: Linked as a consumer to f1018000.pinctrl
> [ 0.038949][ T1] usb3_1-vbus Dropping the fwnode link to pinctrl@18000
> [ 0.039075][ T1] device: 'gpio-keys': device_add
> [ 0.039105][ T1] bus: 'platform': add device gpio-keys
> [ 0.039175][ T1] gpio-keys Linked as a fwnode consumer to pinctrl@18000
> [ 0.039208][ T1] button-wps Linked as a fwnode consumer to gpio@18100
> [ 0.039240][ T1] button-reset Linked as a fwnode consumer to gpio@18100
> [ 0.039265][ T1] device: 'platform:f1018000.pinctrl--platform:gpio-keys': device_add
> [ 0.039392][ T1] devices_kset: Moving gpio-keys to end of list
> [ 0.039403][ T1] platform gpio-keys: Linked as a consumer to f1018000.pinctrl
> [ 0.039410][ T1] gpio-keys Dropping the fwnode link to pinctrl@18000
> [ 0.039504][ T1] device: 'platform:f1018100.gpio--platform:gpio-keys': device_add
> [ 0.039608][ T1] platform gpio-keys: Linked as a sync state only consumer to f1018100.gpio
> [ 0.039663][ T1] device: 'gpio-leds': device_add
> [ 0.039692][ T1] bus: 'platform': add device gpio-leds
> [ 0.039769][ T1] gpio-leds Linked as a fwnode consumer to pinctrl@18000
> [ 0.039799][ T1] led-power Linked as a fwnode consumer to gpio@18140
> [ 0.039831][ T1] led-sata Linked as a fwnode consumer to gpio@18140
> [ 0.039859][ T1] device: 'platform:f1018000.pinctrl--platform:gpio-leds': device_add
> [ 0.039963][ T1] devices_kset: Moving gpio-leds to end of list
> [ 0.039973][ T1] platform gpio-leds: Linked as a consumer to f1018000.pinctrl
> [ 0.039981][ T1] gpio-leds Dropping the fwnode link to pinctrl@18000
> [ 0.040073][ T1] device: 'platform:f1018140.gpio--platform:gpio-leds': device_add
> [ 0.040218][ T1] platform gpio-leds: Linked as a sync state only consumer to f1018140.gpio
> [ 0.040293][ T1] device: 'cpu0': device_add
> [ 0.040320][ T1] bus: 'cpu': add device cpu0
> [ 0.040416][ T1] device: 'cpu1': device_add
> [ 0.040443][ T1] bus: 'cpu': add device cpu1
> [ 0.041005][ T1] device: 'writeback': device_add
> [ 0.041037][ T1] bus: 'workqueue': add device writeback
> [ 0.041548][ T1] device class 'block': registering
> [ 0.041952][ T1] bus: 'platform': add driver reg-fixed-voltage
> [ 0.042094][ T1] bus: 'platform': __driver_probe_device: matched device usb3_1-vbus with driver reg-fixed-voltage
> [ 0.042155][ T1] platform usb3_1-vbus: error -EPROBE_DEFER: supplier f1018140.gpio not ready
> [ 0.042169][ T1] platform usb3_1-vbus: Added to deferred list
> [ 0.042234][ T1] device class 'misc': registering
> [ 0.042472][ T1] device class 'scsi_host': registering
> [ 0.042554][ T1] bus: 'scsi': registered
> [ 0.042560][ T1] device class 'scsi_device': registering
> [ 0.042583][ T1] SCSI subsystem initialized
> [ 0.042591][ T1] device class 'ata_link': registering
> [ 0.042614][ T1] device class 'ata_port': registering
> [ 0.042635][ T1] device class 'ata_device': registering
> [ 0.042694][ T1] libata version 3.00 loaded.
> [ 0.042839][ T1] bus: 'usb': registered
> [ 0.042855][ T1] bus: 'usb': add driver usbfs
> [ 0.042912][ T1] usbcore: registered new interface driver usbfs
> [ 0.042949][ T1] bus: 'usb': add driver hub
> [ 0.043000][ T1] usbcore: registered new interface driver hub
> [ 0.043029][ T1] bus: 'usb': add driver usb
> [ 0.043068][ T1] usbcore: registered new device driver usb
> [ 0.043078][ T1] bus: 'platform': add driver usb_phy_generic
> [ 0.043192][ T1] bus: 'platform': __driver_probe_device: matched device usb3_1-phy with driver usb_phy_generic
> [ 0.043208][ T1] platform usb3_1-phy: error -EPROBE_DEFER: supplier usb3_1-vbus not ready
> [ 0.043218][ T1] platform usb3_1-phy: Added to deferred list
> [ 0.043262][ T1] device class 'input': registering
> [ 0.043304][ T1] device class 'hwmon': registering
> [ 0.043330][ T1] device class 'leds': registering
> [ 0.043586][ T1] device class 'watchdog': registering
> [ 0.053511][ T1] clocksource: Switched to clocksource arm_global_timer
> [ 0.054823][ T1] device class 'mem': registering
> [ 0.054860][ T1] device: 'null': device_add
> [ 0.055308][ T1] device: 'zero': device_add
> [ 0.055451][ T1] device: 'full': device_add
> [ 0.055585][ T1] device: 'random': device_add
> [ 0.055726][ T1] device: 'urandom': device_add
> [ 0.055857][ T1] device: 'kmsg': device_add
> [ 0.056022][ T1] device: 'tty': device_add
> [ 0.056208][ T1] device: 'console': device_add
> [ 0.056385][ T1] PCI: CLS 0 bytes, default 64
> [ 0.056659][ T1] bus: 'platform': add driver armv7-pmu
> [ 0.056689][ T1] bus: 'platform': __driver_probe_device: matched device pmu with driver armv7-pmu
> [ 0.056701][ T1] bus: 'platform': really_probe: probing driver armv7-pmu with device pmu
> [ 0.056723][ T1] armv7-pmu pmu: no pinctrl handle
> [ 0.128996][ T1] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
> [ 0.129014][ T1] driver: 'armv7-pmu': driver_bound: bound to device 'pmu'
> [ 0.129105][ T1] bus: 'platform': really_probe: bound device pmu to driver armv7-pmu
> [ 0.129535][ T1] bus: 'clocksource': registered
> [ 0.129551][ T1] device: 'clocksource': device_add
> [ 0.129576][ T1] device: 'clocksource0': device_add
> [ 0.129610][ T1] bus: 'clocksource': add device clocksource0
> [ 0.129710][ T1] bus: 'platform': add driver alarmtimer
> [ 0.129908][ T1] bus: 'clockevents': registered
> [ 0.129926][ T1] device: 'clockevents': device_add
> [ 0.129949][ T1] device: 'clockevent0': device_add
> [ 0.129968][ T1] bus: 'clockevents': add device clockevent0
> [ 0.130054][ T1] device: 'clockevent1': device_add
> [ 0.130078][ T1] bus: 'clockevents': add device clockevent1
> [ 0.130136][ T1] device: 'broadcast': device_add
> [ 0.130153][ T1] bus: 'clockevents': add device broadcast
> [ 0.130374][ T1] bus: 'event_source': registered
> [ 0.130397][ T1] device: 'software': device_add
> [ 0.130417][ T1] bus: 'event_source': add device software
> [ 0.130528][ T1] device: 'tracepoint': device_add
> [ 0.130550][ T1] bus: 'event_source': add device tracepoint
> [ 0.130604][ T1] device: 'breakpoint': device_add
> [ 0.130623][ T1] bus: 'event_source': add device breakpoint
> [ 0.130675][ T1] device: 'armv7_cortex_a9': device_add
> [ 0.130833][ T1] bus: 'event_source': add device armv7_cortex_a9
> [ 0.131094][ T1] workingset: timestamp_bits=30 max_order=17 bucket_order=0
> [ 0.131792][ T1] squashfs: version 4.0 (2009/01/31) Phillip Lougher
> [ 0.178248][ T1] device class 'bsg': registering
> [ 0.178294][ T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
> [ 0.178445][ T1] bus: 'platform': add driver simple-pm-bus
> [ 0.178478][ T1] bus: 'platform': __driver_probe_device: matched device soc with driver simple-pm-bus
> [ 0.178491][ T1] bus: 'platform': really_probe: probing driver simple-pm-bus with device soc
> [ 0.178514][ T1] simple-pm-bus soc: no pinctrl handle
> [ 0.178567][ T1] simple-pm-bus: probe of soc rejects match -19
> [ 0.178598][ T1] bus: 'platform': __driver_probe_device: matched device soc:internal-regs with driver simple-pm-bus
> [ 0.178609][ T1] bus: 'platform': really_probe: probing driver simple-pm-bus with device soc:internal-regs
> [ 0.178627][ T1] simple-pm-bus soc:internal-regs: no pinctrl handle
> [ 0.178677][ T1] driver: 'simple-pm-bus': driver_bound: bound to device 'soc:internal-regs'
> [ 0.178857][ T1] bus: 'platform': really_probe: bound device soc:internal-regs to driver simple-pm-bus
> [ 0.179037][ T1] device class 'phy': registering
> [ 0.179073][ T1] bus: 'platform': add driver armada-38x-comphy
> [ 0.179137][ T1] bus: 'platform': __driver_probe_device: matched device f1018300.phy with driver armada-38x-comphy
> [ 0.179149][ T1] bus: 'platform': really_probe: probing driver armada-38x-comphy with device f1018300.phy
> [ 0.179169][ T1] armada-38x-comphy f1018300.phy: no pinctrl handle
> [ 0.179321][ T1] phy phy-f1018300.phy.0: Looking up phy-supply from device tree
> [ 0.179334][ T1] phy phy-f1018300.phy.0: Looking up phy-supply property in node /soc/internal-regs/phy@18300/phy@0 failed
> [ 0.179376][ T1] device: 'phy-f1018300.phy.0': device_add
> [ 0.179545][ T1] phy phy-f1018300.phy.1: Looking up phy-supply from device tree
> [ 0.179556][ T1] phy phy-f1018300.phy.1: Looking up phy-supply property in node /soc/internal-regs/phy@18300/phy@1 failed
> [ 0.179595][ T1] device: 'phy-f1018300.phy.1': device_add
> [ 0.179700][ T1] phy phy-f1018300.phy.2: Looking up phy-supply from device tree
> [ 0.179710][ T1] phy phy-f1018300.phy.2: Looking up phy-supply property in node /soc/internal-regs/phy@18300/phy@2 failed
> [ 0.179748][ T1] device: 'phy-f1018300.phy.2': device_add
> [ 0.179847][ T1] phy phy-f1018300.phy.3: Looking up phy-supply from device tree
> [ 0.179857][ T1] phy phy-f1018300.phy.3: Looking up phy-supply property in node /soc/internal-regs/phy@18300/phy@3 failed
> [ 0.179895][ T1] device: 'phy-f1018300.phy.3': device_add
> [ 0.179995][ T1] phy phy-f1018300.phy.4: Looking up phy-supply from device tree
> [ 0.180005][ T1] phy phy-f1018300.phy.4: Looking up phy-supply property in node /soc/internal-regs/phy@18300/phy@4 failed
> [ 0.180043][ T1] device: 'phy-f1018300.phy.4': device_add
> [ 0.180140][ T1] phy phy-f1018300.phy.5: Looking up phy-supply from device tree
> [ 0.180150][ T1] phy phy-f1018300.phy.5: Looking up phy-supply property in node /soc/internal-regs/phy@18300/phy@5 failed
> [ 0.180188][ T1] device: 'phy-f1018300.phy.5': device_add
> [ 0.180324][ T1] driver: 'armada-38x-comphy': driver_bound: bound to device 'f1018300.phy'
> [ 0.180421][ T1] bus: 'platform': really_probe: bound device f1018300.phy to driver armada-38x-comphy
> [ 0.180560][ T1] bus: 'platform': add driver armada-38x-pinctrl
> [ 0.180622][ T1] bus: 'platform': __driver_probe_device: matched device f1018000.pinctrl with driver armada-38x-pinctrl
> [ 0.180633][ T1] bus: 'platform': really_probe: probing driver armada-38x-pinctrl with device f1018000.pinctrl
> [ 0.180659][ T1] armada-38x-pinctrl f1018000.pinctrl: no pinctrl handle
> [ 0.181367][ T1] armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver
> [ 0.181413][ T1] driver: 'armada-38x-pinctrl': driver_bound: bound to device 'f1018000.pinctrl'
> [ 0.181585][ T1] bus: 'platform': really_probe: bound device f1018000.pinctrl to driver armada-38x-pinctrl
> [ 0.181731][ T1] bus: 'platform': add driver mvebu-gpio
> [ 0.181797][ T1] bus: 'platform': __driver_probe_device: matched device f1018100.gpio with driver mvebu-gpio
> [ 0.181807][ T1] bus: 'platform': really_probe: probing driver mvebu-gpio with device f1018100.gpio
> [ 0.181827][ T1] mvebu-gpio f1018100.gpio: no pinctrl handle
> [ 0.182549][ T1] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation.
> [ 0.182677][ T1] device: 'gpiochip0': device_add
> [ 0.182714][ T1] bus: 'gpio': add device gpiochip0
> [ 0.182971][ T1] device: 'gpiochip0': device_add
> [ 0.183402][ T1] driver: 'mvebu-gpio': driver_bound: bound to device 'f1018100.gpio'
> [ 0.183527][ T1] bus: 'platform': really_probe: bound device f1018100.gpio to driver mvebu-gpio
> [ 0.183547][ T1] bus: 'platform': __driver_probe_device: matched device f1018140.gpio with driver mvebu-gpio
> [ 0.183557][ T1] bus: 'platform': really_probe: probing driver mvebu-gpio with device f1018140.gpio
> [ 0.183587][ T1] mvebu-gpio f1018140.gpio: no pinctrl handle
> [ 0.184246][ T1] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation.
> [ 0.184318][ T1] device: 'gpiochip1': device_add
> [ 0.184353][ T1] bus: 'gpio': add device gpiochip1
> [ 0.184533][ T1] device: 'gpiochip32': device_add
> [ 0.184805][ T1] driver: 'mvebu-gpio': driver_bound: bound to device 'f1018140.gpio'
> [ 0.184873][ T1] bus: 'platform': really_probe: bound device f1018140.gpio to driver mvebu-gpio
> [ 0.185035][ T1] bus: 'pci': add driver pcieport
> [ 0.185124][ T1] bus: 'platform': add driver mvebu-pcie
> [ 0.185282][ T1] bus: 'platform': __driver_probe_device: matched device soc:pcie with driver mvebu-pcie
> [ 0.185294][ T1] bus: 'platform': really_probe: probing driver mvebu-pcie with device soc:pcie
> [ 0.185314][ T1] mvebu-pcie soc:pcie: no pinctrl handle
> [ 0.185371][ T1] mvebu-pcie soc:pcie: host bridge /soc/pcie ranges:
> [ 0.185443][ T1] mvebu-pcie soc:pcie: MEM 0x00f1080000..0x00f1081fff -> 0x0000080000
> [ 0.185495][ T1] mvebu-pcie soc:pcie: MEM 0x00f1040000..0x00f1041fff -> 0x0000040000
> [ 0.185545][ T1] mvebu-pcie soc:pcie: MEM 0x00f1044000..0x00f1045fff -> 0x0000044000
> [ 0.185594][ T1] mvebu-pcie soc:pcie: MEM 0x00f1048000..0x00f1049fff -> 0x0000048000
> [ 0.185641][ T1] mvebu-pcie soc:pcie: MEM 0xffffffffffffffff..0x00fffffffe -> 0x0100000000
> [ 0.185686][ T1] mvebu-pcie soc:pcie: IO 0xffffffffffffffff..0x00fffffffe -> 0x0100000000
> [ 0.185730][ T1] mvebu-pcie soc:pcie: MEM 0xffffffffffffffff..0x00fffffffe -> 0x0200000000
> [ 0.185774][ T1] mvebu-pcie soc:pcie: IO 0xffffffffffffffff..0x00fffffffe -> 0x0200000000
> [ 0.185818][ T1] mvebu-pcie soc:pcie: MEM 0xffffffffffffffff..0x00fffffffe -> 0x0300000000
> [ 0.185861][ T1] mvebu-pcie soc:pcie: IO 0xffffffffffffffff..0x00fffffffe -> 0x0300000000
> [ 0.185905][ T1] mvebu-pcie soc:pcie: MEM 0xffffffffffffffff..0x00fffffffe -> 0x0400000000
> [ 0.185931][ T1] mvebu-pcie soc:pcie: IO 0xffffffffffffffff..0x00fffffffe -> 0x0400000000
> [ 0.186664][ T1] device: 'pci0000:00': device_add
> [ 0.186705][ T1] device: '0000:00': device_add
> [ 0.186874][ T1] mvebu-pcie soc:pcie: PCI host bridge to bus 0000:00
> [ 0.186886][ T1] pci_bus 0000:00: root bus resource [bus 00-ff]
> [ 0.186897][ T1] pci_bus 0000:00: root bus resource [mem 0xf1080000-0xf1081fff] (bus address [0x00080000-0x00081fff])
> [ 0.186907][ T1] pci_bus 0000:00: root bus resource [mem 0xf1040000-0xf1041fff] (bus address [0x00040000-0x00041fff])
> [ 0.186917][ T1] pci_bus 0000:00: root bus resource [mem 0xf1044000-0xf1045fff] (bus address [0x00044000-0x00045fff])
> [ 0.186926][ T1] pci_bus 0000:00: root bus resource [mem 0xf1048000-0xf1049fff] (bus address [0x00048000-0x00049fff])
> [ 0.186935][ T1] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
> [ 0.186943][ T1] pci_bus 0000:00: root bus resource [io 0x1000-0xeffff]
> [ 0.187114][ T1] pci 0000:00:01.0: [11ab:6820] type 01 class 0x060400
> [ 0.187276][ T1] device: '0000:00:01.0': device_add
> [ 0.187361][ T1] bus: 'pci': add device 0000:00:01.0
> [ 0.187656][ T1] pci 0000:00:02.0: [11ab:6820] type 01 class 0x060400
> [ 0.187773][ T1] device: '0000:00:02.0': device_add
> [ 0.187855][ T1] bus: 'pci': add device 0000:00:02.0
> [ 0.188869][ T1] PCI: bus0: Fast back to back transfers disabled
> [ 0.188880][ T1] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
> [ 0.188898][ T1] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
> [ 0.188951][ T1] device: '0000:01': device_add
> [ 0.189126][ T1] pci 0000:01:00.0: [11ab:2a55] type 00 class 0x020000
> [ 0.189164][ T1] pci 0000:01:00.0: reg 0x10: [mem 0x40000000-0x400fffff 64bit pref]
> [ 0.189191][ T1] pci 0000:01:00.0: reg 0x18: [mem 0x40100000-0x401fffff 64bit pref]
> [ 0.189338][ T1] pci 0000:01:00.0: supports D1 D2
> [ 0.189346][ T1] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold
> [ 0.189456][ T1] device: '0000:01:00.0': device_add
> [ 0.189517][ T1] bus: 'pci': add device 0000:01:00.0
> [ 0.189743][ T1] PCI: bus1: Fast back to back transfers disabled
> [ 0.189753][ T1] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
> [ 0.189806][ T1] device: '0000:02': device_add
> [ 0.189987][ T1] pci 0000:02:00.0: [11ab:2a55] type 00 class 0x020000
> [ 0.190028][ T1] pci 0000:02:00.0: reg 0x10: [mem 0x42000000-0x420fffff 64bit pref]
> [ 0.190056][ T1] pci 0000:02:00.0: reg 0x18: [mem 0x42100000-0x421fffff 64bit pref]
> [ 0.190228][ T1] pci 0000:02:00.0: supports D1 D2
> [ 0.190236][ T1] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
> [ 0.190281][ T1] pci 0000:02:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:02.0 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link)
> [ 0.190315][ T1] device: '0000:02:00.0': device_add
> [ 0.190368][ T1] bus: 'pci': add device 0000:02:00.0
> [ 0.190597][ T1] PCI: bus2: Fast back to back transfers disabled
> [ 0.190606][ T1] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
> [ 0.190631][ T1] pci 0000:00:01.0: BAR 8: assigned [mem 0xe0000000-0xe01fffff]
> [ 0.190643][ T1] pci 0000:00:02.0: BAR 8: assigned [mem 0xe0200000-0xe03fffff]
> [ 0.190656][ T1] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe00fffff 64bit pref]
> [ 0.190678][ T1] pci 0000:01:00.0: BAR 2: assigned [mem 0xe0100000-0xe01fffff 64bit pref]
> [ 0.190698][ T1] pci 0000:00:01.0: PCI bridge to [bus 01]
> [ 0.190710][ T1] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe01fffff]
> [ 0.190733][ T1] pci 0000:02:00.0: BAR 0: assigned [mem 0xe0200000-0xe02fffff 64bit pref]
> [ 0.190755][ T1] pci 0000:02:00.0: BAR 2: assigned [mem 0xe0300000-0xe03fffff 64bit pref]
> [ 0.190775][ T1] pci 0000:00:02.0: PCI bridge to [bus 02]
> [ 0.190786][ T1] pci 0000:00:02.0: bridge window [mem 0xe0200000-0xe03fffff]
> [ 0.190818][ T1] pci 0000:00:01.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 128
> [ 0.190861][ T1] pci 0000:01:00.0: Max Payload Size set to 128/ 256 (was 128), Max Read Rq 128
> [ 0.190897][ T1] pci 0000:00:02.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 128
> [ 0.190929][ T1] pci 0000:02:00.0: Max Payload Size set to 128/ 256 (was 128), Max Read Rq 128
> [ 0.191002][ T1] bus: 'pci': __driver_probe_device: matched device 0000:00:01.0 with driver pcieport
> [ 0.191017][ T1] bus: 'pci': really_probe: probing driver pcieport with device 0000:00:01.0
> [ 0.191040][ T1] pcieport 0000:00:01.0: no pinctrl handle
> [ 0.191101][ T1] pcieport 0000:00:01.0: enabling device (0140 -> 0142)
> [ 0.191125][ T1] pcieport: probe of 0000:00:01.0 rejects match -19
> [ 0.191169][ T1] bus: 'pci': __driver_probe_device: matched device 0000:00:02.0 with driver pcieport
> [ 0.191179][ T1] bus: 'pci': really_probe: probing driver pcieport with device 0000:00:02.0
> [ 0.191198][ T1] pcieport 0000:00:02.0: no pinctrl handle
> [ 0.191249][ T1] pcieport 0000:00:02.0: enabling device (0140 -> 0142)
> [ 0.191270][ T1] pcieport: probe of 0000:00:02.0 rejects match -19
> [ 0.191328][ T1] driver: 'mvebu-pcie': driver_bound: bound to device 'soc:pcie'
> [ 0.191397][ T1] bus: 'platform': really_probe: bound device soc:pcie to driver mvebu-pcie
> [ 0.191463][ T1] bus: 'platform': add driver of_fixed_factor_clk
> [ 0.191639][ T1] bus: 'platform': add driver of_fixed_clk
> [ 0.191790][ T1] bus: 'platform': add driver gpio-clk
> [ 0.191946][ T1] bus: 'platform': add driver mv_xor
> [ 0.192046][ T1] bus: 'platform': __driver_probe_device: matched device f1060800.xor with driver mv_xor
> [ 0.192057][ T1] bus: 'platform': really_probe: probing driver mv_xor with device f1060800.xor
> [ 0.192076][ T1] mv_xor f1060800.xor: no pinctrl handle
> [ 0.192130][ T1] mv_xor f1060800.xor: Marvell shared XOR driver
> [ 0.255391][ T1] mv_xor f1060800.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
> [ 0.255500][ T1] device: 'dma0chan0': device_add
> [ 0.255731][ T1] driver: 'mv_xor': driver_bound: bound to device 'f1060800.xor'
> [ 0.255823][ T1] bus: 'platform': really_probe: bound device f1060800.xor to driver mv_xor
> [ 0.255842][ T1] bus: 'platform': __driver_probe_device: matched device f1060900.xor with driver mv_xor
> [ 0.255852][ T1] bus: 'platform': really_probe: probing driver mv_xor with device f1060900.xor
> [ 0.255873][ T1] mv_xor f1060900.xor: no pinctrl handle
> [ 0.255930][ T1] mv_xor f1060900.xor: Marvell shared XOR driver
> [ 0.315392][ T1] mv_xor f1060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
> [ 0.315435][ T1] device: 'dma1chan0': device_add
> [ 0.315623][ T1] driver: 'mv_xor': driver_bound: bound to device 'f1060900.xor'
> [ 0.315711][ T1] bus: 'platform': really_probe: bound device f1060900.xor to driver mv_xor
> [ 0.315850][ T1] device: 'ptmx': device_add
> [ 0.316039][ T1] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
> [ 0.316073][ T1] Registering platform device 'serial8250'. Parent at platform
> [ 0.316082][ T1] device: 'serial8250': device_add
> [ 0.316104][ T1] bus: 'platform': add device serial8250
> [ 0.316309][ T1] device: 'ttyS0': device_add
> [ 0.316764][ T1] bus: 'platform': add driver serial8250
> [ 0.316845][ T1] bus: 'platform': __driver_probe_device: matched device serial8250 with driver serial8250
> [ 0.316857][ T1] bus: 'platform': really_probe: probing driver serial8250 with device serial8250
> [ 0.316877][ T1] serial8250 serial8250: no default pinctrl state
> [ 0.316907][ T1] driver: 'serial8250': driver_bound: bound to device 'serial8250'
> [ 0.316942][ T1] bus: 'platform': really_probe: bound device serial8250 to driver serial8250
> [ 0.316990][ T1] bus: 'platform': add driver dw-apb-uart
> [ 0.317047][ T1] bus: 'platform': __driver_probe_device: matched device f1012000.serial with driver dw-apb-uart
> [ 0.317057][ T1] bus: 'platform': really_probe: probing driver dw-apb-uart with device f1012000.serial
> [ 0.317083][ T1] dw-apb-uart f1012000.serial: no pinctrl handle
> [ 0.317441][ T1] device: 'ttyS0': device_unregister
> [ 0.318131][ T1] printk: console [ttyS0] disabled
> [ 0.338420][ T1] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 41, base_baud = 12500000) is a 16550A
> [ 0.338599][ T1] printk: console [ttyS0] enabled
> [ 3.904166][ T1] device: 'ttyS0': device_add
> [ 3.909336][ T1] driver: 'dw-apb-uart': driver_bound: bound to device 'f1012000.serial'
> [ 3.917762][ T1] bus: 'platform': really_probe: bound device f1012000.serial to driver dw-apb-uart
> [ 3.927253][ T1] device: 'ttyprintk': device_add
> [ 3.932607][ T1] device: 'loop-control': device_add
> [ 3.938677][ T1] device: 'loop0': device_add
> [ 3.944055][ T1] device: '7:0': device_add
> [ 3.948749][ T1] loop: module loaded
> [ 3.952615][ T1] device class 'zram-control': registering
> [ 3.958591][ T1] device: 'zram0': device_add
> [ 3.963951][ T1] device: '254:0': device_add
> [ 3.968808][ T1] zram: Added device: zram0
> [ 3.973241][ T1] device class 'scsi_disk': registering
> [ 3.978745][ T1] bus: 'scsi': add driver sd
> [ 3.983265][ T1] bus: 'pci': add driver ahci
> [ 3.987932][ T1] bus: 'platform': add driver ahci-mvebu
> [ 3.993594][ T1] bus: 'platform': __driver_probe_device: matched device f10a8000.sata with driver ahci-mvebu
> [ 4.003762][ T1] bus: 'platform': really_probe: probing driver ahci-mvebu with device f10a8000.sata
> [ 4.013131][ T1] ahci-mvebu f10a8000.sata: no pinctrl handle
> [ 4.019244][ T1] ahci-mvebu f10a8000.sata: Looking up ahci-supply from device tree
> [ 4.027143][ T1] ahci-mvebu f10a8000.sata: Looking up ahci-supply property in node /soc/internal-regs/sata@a8000 failed
> [ 4.038288][ T1] ahci-mvebu f10a8000.sata: supply ahci not found, using dummy regulator
> [ 4.046754][ T1] device: 'regulator:regulator.0--platform:f10a8000.sata': device_add
> [ 4.055063][ T1] devices_kset: Moving f10a8000.sata to end of list
> [ 4.061545][ T1] ahci-mvebu f10a8000.sata: Linked as a consumer to regulator.0
> [ 4.069095][ T1] ahci-mvebu f10a8000.sata: Looking up phy-supply from device tree
> [ 4.076903][ T1] ahci-mvebu f10a8000.sata: Looking up phy-supply property in node /soc/internal-regs/sata@a8000 failed
> [ 4.087957][ T1] ahci-mvebu f10a8000.sata: supply phy not found, using dummy regulator
> [ 4.096317][ T1] ahci-mvebu f10a8000.sata: Looking up target-supply from device tree
> [ 4.104389][ T1] ahci-mvebu f10a8000.sata: Looking up target-supply property in node /soc/internal-regs/sata@a8000 failed
> [ 4.115712][ T1] ahci-mvebu f10a8000.sata: supply target not found, using dummy regulator
> [ 4.124640][ T1] ahci-mvebu f10a8000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
> [ 4.134463][ T1] ahci-mvebu f10a8000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
> [ 4.144166][ T1] device: 'ata1': device_add
> [ 4.148665][ T1] device: 'ata1': device_add
> [ 4.153494][ T1] device: 'link1': device_add
> [ 4.158076][ T1] device: 'link1': device_add
> [ 4.162753][ T1] device: 'dev1.0': device_add
> [ 4.167441][ T1] device: 'dev1.0': device_add
> [ 4.172225][ T1] device: 'ata2': device_add
> [ 4.176746][ T1] device: 'ata2': device_add
> [ 4.181318][ T1] device: 'link2': device_add
> [ 4.185916][ T1] device: 'link2': device_add
> [ 4.190572][ T1] device: 'dev2.0': device_add
> [ 4.195257][ T1] device: 'dev2.0': device_add
> [ 4.200422][ T1] device: 'scsi_tmf_0': device_add
> [ 4.205482][ T1] bus: 'workqueue': add device scsi_tmf_0
> [ 4.211166][ T1] scsi host0: ahci-mvebu
> [ 4.215457][ T1] device: 'host0': device_add
> [ 4.220034][ T1] bus: 'scsi': add device host0
> [ 4.224894][ T1] device: 'host0': device_add
> [ 4.230035][ T1] device: 'scsi_tmf_1': device_add
> [ 4.235086][ T1] bus: 'workqueue': add device scsi_tmf_1
> [ 4.240764][ T1] scsi host1: ahci-mvebu
> [ 4.244976][ T1] device: 'host1': device_add
> [ 4.249551][ T1] bus: 'scsi': add device host1
> [ 4.254347][ T1] device: 'host1': device_add
> [ 4.259117][ T1] ata1: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x100 irq 42
> [ 4.267796][ T1] ata2: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x180 irq 42
> [ 4.276522][ T1] driver: 'ahci-mvebu': driver_bound: bound to device 'f10a8000.sata'
> [ 4.284664][ T1] bus: 'platform': really_probe: bound device f10a8000.sata to driver ahci-mvebu
> [ 4.293790][ T1] device class 'mtd': registering
> [ 4.298760][ T1] device: 'mtd-0': device_add
> [ 4.303656][ T1] bus: 'platform': add driver marvell-nfc
> [ 4.309428][ T1] bus: 'platform': __driver_probe_device: matched device f10d0000.nand-controller with driver marvell-nfc
> [ 4.320642][ T1] bus: 'platform': really_probe: probing driver marvell-nfc with device f10d0000.nand-controller
> [ 4.331079][ T1] marvell-nfc f10d0000.nand-controller: no pinctrl handle
> [ 4.338645][ T1] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xf1
> [ 4.345773][ T1] nand: AMD/Spansion S34ML01G2
> [ 4.350417][ T1] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
> [ 4.359130][ T1] Bad block table found at page 65472, version 0x01
> [ 4.366098][ T1] Bad block table found at page 65408, version 0x01
> [ 4.372977][ T1] 10 fixed-partitions partitions found on MTD device pxa3xx_nand-0
> [ 4.380809][ T1] Creating 10 MTD partitions on "pxa3xx_nand-0":
> [ 4.387045][ T1] 0x000000000000-0x000000200000 : "u-boot"
> [ 4.392853][ T1] device: 'mtd0': device_add
> [ 4.398063][ T1] device: 'mtd0ro': device_add
> [ 4.403286][ T1] device: 'mtdblock0': device_add
> [ 4.408943][ T1] device: '31:0': device_add
> [ 4.413714][ T1] 0x000000200000-0x000000240000 : "u_env"
> [ 4.419348][ T1] device: 'mtd1': device_add
> [ 4.424196][ T1] device: 'mtd1ro': device_add
> [ 4.429161][ T1] device: 'mtdblock1': device_add
> [ 4.434666][ T1] device: '31:1': device_add
> [ 4.439375][ T1] 0x000000240000-0x000000280000 : "s_env"
> [ 4.445026][ T1] device: 'mtd2': device_add
> [ 4.449822][ T1] device: 'mtd2ro': device_add
> [ 4.454814][ T1] device: 'mtdblock2': device_add
> [ 4.460283][ T1] device: '31:2': device_add
> [ 4.464991][ T1] 0x000000900000-0x000000a00000 : "devinfo"
> [ 4.470802][ T1] device: 'mtd3': device_add
> [ 4.475627][ T1] device: 'mtd3ro': device_add
> [ 4.480671][ T1] device: 'mtdblock3': device_add
> [ 4.486343][ T1] device: '31:3': device_add
> [ 4.491026][ T1] 0x000000a00000-0x000003200000 : "kernel1"
> [ 4.497574][ T1] device: 'mtd4': device_add
> [ 4.502393][ T1] device: 'mtd4ro': device_add
> [ 4.507422][ T1] device: 'mtdblock4': device_add
> [ 4.512897][ T1] device: '31:4': device_add
> [ 4.517595][ T1] 0x000001000000-0x000003200000 : "rootfs1"
> [ 4.524022][ T1] device: 'mtd5': device_add
> [ 4.528846][ T1] device: 'mtd5ro': device_add
> [ 4.533837][ T1] device: 'mtdblock5': device_add
> [ 4.539310][ T1] device: '31:5': device_add
> [ 4.544010][ T1] 0x000003200000-0x000005a00000 : "kernel2"
> [ 4.550523][ T1] device: 'mtd6': device_add
> [ 4.555347][ T1] device: 'mtd6ro': device_add
> [ 4.560333][ T1] device: 'mtdblock6': device_add
> [ 4.565869][ T1] device: '31:6': device_add
> [ 4.570544][ T1] 0x000003800000-0x000005a00000 : "rootfs2"
> [ 4.576983][ T1] device: 'mtd7': device_add
> [ 4.581798][ T1] device: 'mtd7ro': device_add
> [ 4.586787][ T1] device: 'mtdblock7': device_add
> [ 4.592257][ T1] device: '31:7': device_add
> [ 4.596967][ T1] 0x000005a00000-0x000008000000 : "syscfg"
> [ 4.603339][ T1] device: 'mtd8': device_add
> [ 4.608168][ T1] device: 'mtd8ro': device_add
> [ 4.613112][ T1] device: 'mtdblock8': device_add
> [ 4.618616][ T1] device: '31:8': device_add
> [ 4.623284][ T1] 0x000000280000-0x000000900000 : "unused_area"
> [ 4.629570][ T1] device: 'mtd9': device_add
> [ 4.634392][ T1] device: 'mtd9ro': device_add
> [ 4.635223][ T108] ata1: SATA link down (SStatus 0 SControl 300)
> [ 4.639358][ T1] device: 'mtdblock9': device_add
> [ 4.650694][ T1] device: '31:9': device_add
> [ 4.655423][ T1] driver: 'marvell-nfc': driver_bound: bound to device 'f10d0000.nand-controller'
> [ 4.664665][ T1] bus: 'platform': really_probe: bound device f10d0000.nand-controller to driver marvell-nfc
> [ 4.674824][ T1] bus: 'spi': add driver spi-nor
> [ 4.679694][ T1] bus: 'platform': add driver orion_spi
> [ 4.685420][ T1] bus: 'pci': add driver ehci-pci
> [ 4.690406][ T1] bus: 'platform': add driver orion-ehci
> [ 4.696033][ T1] bus: 'platform': __driver_probe_device: matched device f1058000.usb with driver orion-ehci
> [ 4.706111][ T1] bus: 'platform': really_probe: probing driver orion-ehci with device f1058000.usb
> [ 4.715420][ T1] orion-ehci f1058000.usb: no pinctrl handle
> [ 4.721508][ T1] orion-ehci f1058000.usb: EHCI Host Controller
> [ 4.727893][ T1] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1
> [ 4.736445][ T1] orion-ehci f1058000.usb: irq 44, io mem 0xf1058000
> [ 4.763497][ T1] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00
> [ 4.770833][ T1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.02
> [ 4.779918][ T1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 4.787901][ T1] usb usb1: Product: EHCI Host Controller
> [ 4.793525][ T1] usb usb1: Manufacturer: Linux 6.2.0-rc6-M95D-00001-gd783bde80fb1 ehci_hcd
> [ 4.802095][ T1] usb usb1: SerialNumber: f1058000.usb
> [ 4.807476][ T1] device: 'usb1': device_add
> [ 4.812226][ T1] bus: 'usb': add device usb1
> [ 4.817405][ T1] bus: 'usb': __driver_probe_device: matched device usb1 with driver usb
> [ 4.825814][ T1] bus: 'usb': really_probe: probing driver usb with device usb1
> [ 4.833724][ T1] device: '1-0:1.0': device_add
> [ 4.838539][ T1] bus: 'usb': add device 1-0:1.0
> [ 4.843577][ T1] bus: 'usb': __driver_probe_device: matched device 1-0:1.0 with driver hub
> [ 4.852178][ T1] bus: 'usb': really_probe: probing driver hub with device 1-0:1.0
> [ 4.860032][ T1] hub 1-0:1.0: USB hub found
> [ 4.864637][ T1] hub 1-0:1.0: 1 port detected
> [ 4.869619][ T1] device: 'usb1-port1': device_add
> [ 4.874854][ T1] usb usb1-port1: adding component (ops connector_ops)
> [ 4.881747][ T1] driver: 'hub': driver_bound: bound to device '1-0:1.0'
> [ 4.888795][ T1] bus: 'usb': really_probe: bound device 1-0:1.0 to driver hub
> [ 4.896355][ T1] device: 'ep_81': device_add
> [ 4.900994][ T1] driver: 'usb': driver_bound: bound to device 'usb1'
> [ 4.907829][ T1] bus: 'usb': really_probe: bound device usb1 to driver usb
> [ 4.915047][ T1] device: 'ep_00': device_add
> [ 4.919669][ T1] driver: 'orion-ehci': driver_bound: bound to device 'f1058000.usb'
> [ 4.927708][ T1] bus: 'platform': really_probe: bound device f1058000.usb to driver orion-ehci
> [ 4.936772][ T1] bus: 'pci': add driver xhci_hcd
> [ 4.941750][ T1] bus: 'platform': add driver xhci-hcd
> [ 4.947322][ T1] bus: 'platform': __driver_probe_device: matched device f10f8000.usb3 with driver xhci-hcd
> [ 4.957313][ T1] bus: 'platform': really_probe: probing driver xhci-hcd with device f10f8000.usb3
> [ 4.966525][ T1] xhci-hcd f10f8000.usb3: no pinctrl handle
> [ 4.972620][ T1] xhci-hcd f10f8000.usb3: Driver xhci-hcd requests probe deferral
> [ 4.980772][ T1] platform f10f8000.usb3: Added to deferred list
> [ 4.987137][ T1] bus: 'usb': add driver usb-storage
> [ 4.992376][ T1] usbcore: registered new interface driver usb-storage
> [ 4.999142][ T1] i2c_dev: i2c /dev entries driver
> [ 5.004167][ T1] device class 'i2c-dev': registering
> [ 5.009459][ T1] bus: 'platform': add driver mv64xxx_i2c
> [ 5.015128][ T1] bus: 'platform': __driver_probe_device: matched device f1011000.i2c with driver mv64xxx_i2c
> [ 5.025293][ T1] bus: 'platform': really_probe: probing driver mv64xxx_i2c with device f1011000.i2c
> [ 5.034738][ T1] mv64xxx_i2c f1011000.i2c: no init pinctrl state
> [ 5.041364][ T1] device: 'i2c-0': device_add
> [ 5.045987][ T1] bus: 'i2c': add device i2c-0
> [ 5.050727][ T1] device: 'i2c-0': device_add
> [ 5.055975][ T1] device: '0-004c': device_add
> [ 5.060664][ T1] bus: 'i2c': add device 0-004c
> [ 5.065538][ T1] device: '0-0068': device_add
> [ 5.070221][ T1] bus: 'i2c': add device 0-0068
> [ 5.075126][ T1] driver: 'mv64xxx_i2c': driver_bound: bound to device 'f1011000.i2c'
> [ 5.083238][ T1] bus: 'platform': really_probe: bound device f1011000.i2c to driver mv64xxx_i2c
> [ 5.092429][ T1] bus: 'i2c': add driver tmp421
> [ 5.097200][ T1] bus: 'i2c': __driver_probe_device: matched device 0-004c with driver tmp421
> [ 5.105967][ T1] bus: 'i2c': really_probe: probing driver tmp421 with device 0-004c
> [ 5.113983][ T1] tmp421 0-004c: no pinctrl handle
> [ 5.120566][ T1] device: 'hwmon0': device_add
> [ 5.125468][ T1] driver: 'tmp421': driver_bound: bound to device '0-004c'
> [ 5.127046][ T113] ata2: SATA link down (SStatus 100 SControl 300)
> [ 5.132677][ T1] bus: 'i2c': really_probe: bound device 0-004c to driver tmp421
> [ 5.146582][ T1] bus: 'platform': add driver armada_thermal
> [ 5.152605][ T1] bus: 'platform': __driver_probe_device: matched device f10e4078.thermal with driver armada_thermal
> [ 5.163382][ T1] bus: 'platform': really_probe: probing driver armada_thermal with device f10e4078.thermal
> [ 5.173380][ T1] armada_thermal f10e4078.thermal: no pinctrl handle
> [ 5.181271][ T1] device: 'thermal_zone0': device_add
> [ 5.186817][ T1] device: 'hwmon1': device_add
> [ 5.191601][ T1] driver: 'armada_thermal': driver_bound: bound to device 'f10e4078.thermal'
> [ 5.200350][ T1] bus: 'platform': really_probe: bound device f10e4078.thermal to driver armada_thermal
> [ 5.210069][ T1] bus: 'platform': add driver orion_wdt
> [ 5.215608][ T1] bus: 'platform': __driver_probe_device: matched device f1020300.watchdog with driver orion_wdt
> [ 5.226033][ T1] bus: 'platform': really_probe: probing driver orion_wdt with device f1020300.watchdog
> [ 5.235681][ T1] orion_wdt f1020300.watchdog: no pinctrl handle
> [ 5.242461][ T1] device: 'watchdog': device_add
> [ 5.247620][ T1] device: 'watchdog0': device_add
> [ 5.252983][ T1] orion_wdt: Initial timeout 171 sec
> [ 5.258190][ T1] driver: 'orion_wdt': driver_bound: bound to device 'f1020300.watchdog'
> [ 5.266588][ T1] bus: 'platform': really_probe: bound device f1020300.watchdog to driver orion_wdt
> [ 5.276013][ T1] bus: 'platform': add driver leds-gpio
> [ 5.281559][ T1] bus: 'platform': __driver_probe_device: matched device gpio-leds with driver leds-gpio
> [ 5.291288][ T1] bus: 'platform': really_probe: probing driver leds-gpio with device gpio-leds
> [ 5.300303][ T1] leds-gpio gpio-leds: no init pinctrl state
> [ 5.306412][ T1] device: 'shelby:white:power': device_add
> [ 5.312553][ T1] device: 'shelby:white:sata': device_add
> [ 5.318358][ T1] driver: 'leds-gpio': driver_bound: bound to device 'gpio-leds'
> [ 5.326017][ T1] leds-gpio gpio-leds: Dropping the link to f1018140.gpio
> [ 5.333021][ T1] device: 'platform:f1018140.gpio--platform:gpio-leds': device_unregister
> [ 5.341661][ T1] bus: 'platform': really_probe: bound device gpio-leds to driver leds-gpio
> [ 5.350303][ T1] bus: 'i2c': add driver leds-pca963x
> [ 5.355603][ T1] bus: 'i2c': __driver_probe_device: matched device 0-0068 with driver leds-pca963x
> [ 5.364902][ T1] bus: 'i2c': really_probe: probing driver leds-pca963x with device 0-0068
> [ 5.373398][ T1] leds-pca963x 0-0068: no pinctrl handle
> [ 5.381600][ T1] device: 'pca963x:shelby:amber:wan': device_add
> [ 5.387975][ T1] device: 'pca963x:shelby:white:wan': device_add
> [ 5.394320][ T1] device: 'pca963x:shelby:white:wlan_2g': device_add
> [ 5.400996][ T1] device: 'pca963x:shelby:white:wlan_5g': device_add
> [ 5.407689][ T1] device: 'pca963x:shelby:white:usb2': device_add
> [ 5.414128][ T1] device: 'pca963x:shelby:white:usb3_1': device_add
> [ 5.420709][ T1] device: 'pca963x:shelby:white:usb3_2': device_add
> [ 5.427321][ T1] device: 'pca963x:shelby:white:wps': device_add
> [ 5.433666][ T1] device: 'pca963x:shelby:amber:wps': device_add
> [ 5.439962][ T1] driver: 'leds-pca963x': driver_bound: bound to device '0-0068'
> [ 5.447702][ T1] bus: 'i2c': really_probe: bound device 0-0068 to driver leds-pca963x
> [ 5.456218][ T1] bus: 'platform': add driver marvell-cesa
> [ 5.462067][ T1] bus: 'platform': __driver_probe_device: matched device f1090000.crypto with driver marvell-cesa
> [ 5.472583][ T1] bus: 'platform': really_probe: probing driver marvell-cesa with device f1090000.crypto
> [ 5.482321][ T1] marvell-cesa f1090000.crypto: no pinctrl handle
> [ 5.489799][ T1] marvell-cesa f1090000.crypto: CESA device successfully registered
> [ 5.497708][ T1] driver: 'marvell-cesa': driver_bound: bound to device 'f1090000.crypto'
> [ 5.506194][ T1] bus: 'platform': really_probe: bound device f1090000.crypto to driver marvell-cesa
> [ 5.515672][ T1] device class 'extcon': registering
> [ 5.520876][ T1] bus: 'platform': add driver mvebu-devbus
> [ 5.526788][ T1] Registering SWP/SWPB emulation handler
> [ 5.562880][ T22] devices_kset: Moving usb3_1-vbus to end of list
> [ 5.569355][ T22] devices_kset: Moving usb3_1-phy to end of list
> [ 5.575603][ T22] platform usb3_1-vbus: Retrying from deferred list
> [ 5.582133][ T22] bus: 'platform': __driver_probe_device: matched device usb3_1-vbus with driver reg-fixed-voltage
> [ 5.592771][ T22] bus: 'platform': really_probe: probing driver reg-fixed-voltage with device usb3_1-vbus
> [ 5.602734][ T22] reg-fixed-voltage usb3_1-vbus: no init pinctrl state
> [ 5.609849][ T22] usb3_1-vbus: 5000 mV, disabled
> [ 5.614702][ T22] device: 'regulator.1': device_add
> [ 5.620241][ T22] reg-fixed-voltage usb3_1-vbus: usb3_1-vbus supplying 5000000uV
> [ 5.627878][ T22] driver: 'reg-fixed-voltage': driver_bound: bound to device 'usb3_1-vbus'
> [ 5.636473][ T22] bus: 'platform': really_probe: bound device usb3_1-vbus to driver reg-fixed-voltage
> [ 5.645968][ T22] devices_kset: Moving usb3_1-phy to end of list
> [ 5.652190][ T22] platform usb3_1-phy: Retrying from deferred list
> [ 5.658617][ T22] bus: 'platform': __driver_probe_device: matched device usb3_1-phy with driver usb_phy_generic
> [ 5.668951][ T22] bus: 'platform': really_probe: probing driver usb_phy_generic with device usb3_1-phy
> [ 5.678512][ T22] usb_phy_generic usb3_1-phy: no pinctrl handle
> [ 5.684792][ T22] usb_phy_generic usb3_1-phy: Looking up vcc-supply from device tree
> [ 5.692902][ T22] device: 'regulator:regulator.1--platform:usb3_1-phy': device_add
> [ 5.700897][ T22] devices_kset: Moving usb3_1-phy to end of list
> [ 5.707136][ T22] usb_phy_generic usb3_1-phy: Linked as a consumer to regulator.1
> [ 5.714856][ T22] usb_phy_generic usb3_1-phy: Looking up vbus-supply from device tree
> [ 5.722908][ T22] usb_phy_generic usb3_1-phy: Looking up vbus-supply property in node /usb3_1-phy failed
> [ 5.732643][ T22] usb_phy_generic usb3_1-phy: dummy supplies not allowed for exclusive requests
> [ 5.741594][ T22] driver: 'usb_phy_generic': driver_bound: bound to device 'usb3_1-phy'
> [ 5.749893][ T22] bus: 'platform': really_probe: bound device usb3_1-phy to driver usb_phy_generic
> [ 5.759101][ T22] devices_kset: Moving f10f8000.usb3 to end of list
> [ 5.765599][ T22] platform f10f8000.usb3: Retrying from deferred list
> [ 5.772344][ T22] bus: 'platform': __driver_probe_device: matched device f10f8000.usb3 with driver xhci-hcd
> [ 5.782331][ T22] bus: 'platform': really_probe: probing driver xhci-hcd with device f10f8000.usb3
> [ 5.791547][ T22] xhci-hcd f10f8000.usb3: no pinctrl handle
> [ 5.797688][ T22] xhci-hcd f10f8000.usb3: xHCI Host Controller
> [ 5.803844][ T22] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 2
> [ 5.815748][ T22] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000010010
> [ 5.825904][ T22] xhci-hcd f10f8000.usb3: irq 45, io mem 0xf10f8000
> [ 5.832874][ T22] xhci-hcd f10f8000.usb3: xHCI Host Controller
> [ 5.838959][ T22] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 3
> [ 5.847221][ T22] xhci-hcd f10f8000.usb3: Host supports USB 3.0 SuperSpeed
> [ 5.854811][ T22] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.02
> [ 5.863880][ T22] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 5.871843][ T22] usb usb2: Product: xHCI Host Controller
> [ 5.873495][ T113] ata2: SATA link down (SStatus 100 SControl 300)
> [ 5.877560][ T22] usb usb2: Manufacturer: Linux 6.2.0-rc6-M95D-00001-gd783bde80fb1 xhci-hcd
> [ 5.883845][ T113] ata2: limiting SATA link speed to 1.5 Gbps
> [ 5.892342][ T22] usb usb2: SerialNumber: f10f8000.usb3
> [ 5.903671][ T22] device: 'usb2': device_add
> [ 5.908401][ T22] bus: 'usb': add device usb2
> [ 5.913341][ T22] bus: 'usb': __driver_probe_device: matched device usb2 with driver usb
> [ 5.921835][ T22] bus: 'usb': really_probe: probing driver usb with device usb2
> [ 5.929553][ T22] device: '2-0:1.0': device_add
> [ 5.934415][ T22] bus: 'usb': add device 2-0:1.0
> [ 5.939337][ T22] bus: 'usb': __driver_probe_device: matched device 2-0:1.0 with driver hub
> [ 5.947963][ T22] bus: 'usb': really_probe: probing driver hub with device 2-0:1.0
> [ 5.955808][ T22] hub 2-0:1.0: USB hub found
> [ 5.960405][ T22] hub 2-0:1.0: 1 port detected
> [ 5.965266][ T22] device: 'usb2-port1': device_add
> [ 5.970351][ T22] usb usb2-port1: adding component (ops connector_ops)
> [ 5.977190][ T22] driver: 'hub': driver_bound: bound to device '2-0:1.0'
> [ 5.984226][ T22] bus: 'usb': really_probe: bound device 2-0:1.0 to driver hub
> [ 5.991687][ T22] device: 'ep_81': device_add
> [ 5.996344][ T22] driver: 'usb': driver_bound: bound to device 'usb2'
> [ 6.003061][ T22] bus: 'usb': really_probe: bound device usb2 to driver usb
> [ 6.010293][ T22] device: 'ep_00': device_add
> [ 6.015169][ T22] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
> [ 6.024305][ T22] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.02
> [ 6.033315][ T22] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 6.041298][ T22] usb usb3: Product: xHCI Host Controller
> [ 6.046928][ T22] usb usb3: Manufacturer: Linux 6.2.0-rc6-M95D-00001-gd783bde80fb1 xhci-hcd
> [ 6.055514][ T22] usb usb3: SerialNumber: f10f8000.usb3
> [ 6.060956][ T22] device: 'usb3': device_add
> [ 6.065662][ T22] bus: 'usb': add device usb3
> [ 6.070546][ T22] bus: 'usb': __driver_probe_device: matched device usb3 with driver usb
> [ 6.078914][ T22] bus: 'usb': really_probe: probing driver usb with device usb3
> [ 6.086614][ T22] device: '3-0:1.0': device_add
> [ 6.091431][ T22] bus: 'usb': add device 3-0:1.0
> [ 6.096360][ T22] bus: 'usb': __driver_probe_device: matched device 3-0:1.0 with driver hub
> [ 6.104967][ T22] bus: 'usb': really_probe: probing driver hub with device 3-0:1.0
> [ 6.112790][ T22] hub 3-0:1.0: USB hub found
> [ 6.117341][ T22] hub 3-0:1.0: 1 port detected
> [ 6.122113][ T22] device: 'usb3-port1': device_add
> [ 6.127206][ T22] usb usb3-port1: adding component (ops connector_ops)
> [ 6.134074][ T22] driver: 'hub': driver_bound: bound to device '3-0:1.0'
> [ 6.141051][ T22] bus: 'usb': really_probe: bound device 3-0:1.0 to driver hub
> [ 6.148534][ T22] device: 'ep_81': device_add
> [ 6.153173][ T22] driver: 'usb': driver_bound: bound to device 'usb3'
> [ 6.159906][ T22] bus: 'usb': really_probe: bound device usb3 to driver usb
> [ 6.167122][ T22] device: 'ep_00': device_add
> [ 6.171748][ T22] driver: 'xhci-hcd': driver_bound: bound to device 'f10f8000.usb3'
> [ 6.179703][ T22] bus: 'platform': really_probe: bound device f10f8000.usb3 to driver xhci-hcd
> [ 6.188719][ T1] device class 'ubi': registering
> [ 6.193754][ T1] device: 'ubi_ctrl': device_add
> [ 6.200728][ T1] Waiting 100 sec before mounting root device...
> [ 6.713487][ T201] usb 2-1: new high-speed USB device number 2 using xhci-hcd
> [ 6.833478][ T113] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
> [ 6.840791][ T113] ata2.15: Port Multiplier 1.2, 0x197b:0x0325 r193, 8 ports, feat 0xf/0x1f
> [ 6.849421][ T113] device: 'link2.0': device_add
> [ 6.854363][ T113] device: 'link2.0': device_add
> [ 6.859268][ T113] device: 'dev2.0.0': device_add
> [ 6.864156][ T113] device: 'dev2.0.0': device_add
> [ 6.869153][ T113] device: 'link2.1': device_add
> [ 6.873934][ T113] device: 'link2.1': device_add
> [ 6.878791][ T113] device: 'dev2.1.0': device_add
> [ 6.883657][ T113] device: 'dev2.1.0': device_add
> [ 6.888636][ T113] device: 'link2.2': device_add
> [ 6.893392][ T113] device: 'link2.2': device_add
> [ 6.898284][ T113] device: 'dev2.2.0': device_add
> [ 6.903128][ T113] device: 'dev2.2.0': device_add
> [ 6.908111][ T113] device: 'link2.3': device_add
> [ 6.912869][ T113] device: 'link2.3': device_add
> [ 6.917726][ T113] device: 'dev2.3.0': device_add
> [ 6.922572][ T113] device: 'dev2.3.0': device_add
> [ 6.927555][ T113] device: 'link2.4': device_add
> [ 6.932314][ T113] device: 'link2.4': device_add
> [ 6.937177][ T113] device: 'dev2.4.0': device_add
> [ 6.942024][ T113] device: 'dev2.4.0': device_add
> [ 6.947001][ T113] device: 'link2.5': device_add
> [ 6.951761][ T113] device: 'link2.5': device_add
> [ 6.956635][ T113] device: 'dev2.5.0': device_add
> [ 6.961483][ T113] device: 'dev2.5.0': device_add
> [ 6.966462][ T113] device: 'link2.6': device_add
> [ 6.971223][ T113] device: 'link2.6': device_add
> [ 6.976084][ T113] device: 'dev2.6.0': device_add
> [ 6.980939][ T113] device: 'dev2.6.0': device_add
> [ 6.985953][ T113] device: 'link2.7': device_add
> [ 6.990720][ T113] device: 'link2.7': device_add
> [ 6.995600][ T113] device: 'dev2.7.0': device_add
> [ 7.000451][ T113] device: 'dev2.7.0': device_add
> [ 7.005439][ T113] device: 'link2.8': device_add
> [ 7.010203][ T113] device: 'link2.8': device_add
> [ 7.015076][ T113] device: 'dev2.8.0': device_add
> [ 7.019926][ T113] device: 'dev2.8.0': device_add
> [ 7.024908][ T113] device: 'link2.9': device_add
> [ 7.029672][ T113] device: 'link2.9': device_add
> [ 7.034545][ T113] device: 'dev2.9.0': device_add
> [ 7.039396][ T113] device: 'dev2.9.0': device_add
> [ 7.044391][ T113] device: 'link2.10': device_add
> [ 7.049245][ T113] device: 'link2.10': device_add
> [ 7.054199][ T113] device: 'dev2.10.0': device_add
> [ 7.059139][ T113] device: 'dev2.10.0': device_add
> [ 7.064224][ T113] device: 'link2.11': device_add
> [ 7.069079][ T113] device: 'link2.11': device_add
> [ 7.074042][ T113] device: 'dev2.11.0': device_add
> [ 7.078984][ T113] device: 'dev2.11.0': device_add
> [ 7.084093][ T113] device: 'link2.12': device_add
> [ 7.088950][ T113] device: 'link2.12': device_add
> [ 7.093916][ T113] device: 'dev2.12.0': device_add
> [ 7.098859][ T113] device: 'dev2.12.0': device_add
> [ 7.103942][ T113] device: 'link2.13': device_add
> [ 7.108800][ T113] device: 'link2.13': device_add
> [ 7.113780][ T113] device: 'dev2.13.0': device_add
> [ 7.118725][ T113] device: 'dev2.13.0': device_add
> [ 7.123808][ T113] device: 'link2.14': device_add
> [ 7.128667][ T113] device: 'link2.14': device_add
> [ 7.133635][ T113] device: 'dev2.14.0': device_add
> [ 7.138581][ T113] device: 'dev2.14.0': device_add
> [ 7.143662][ T113] ahci-mvebu f10a8000.sata: FBS is enabled
> [ 7.149993][ T113] ata2.00: hard resetting link
> [ 7.180668][ T201] usb 2-1: New USB device found, idVendor=058f, idProduct=6387, bcdDevice= 1.00
> [ 7.189672][ T201] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> [ 7.197569][ T201] usb 2-1: Product: Mass Storage
> [ 7.202390][ T201] usb 2-1: Manufacturer: Generic
> [ 7.207242][ T201] usb 2-1: SerialNumber: 016E07B1
> [ 7.212167][ T201] device: '2-1': device_add
> [ 7.216803][ T201] bus: 'usb': add device 2-1
> [ 7.221626][ T201] bus: 'usb': __driver_probe_device: matched device 2-1 with driver usb
> [ 7.229942][ T201] bus: 'usb': really_probe: probing driver usb with device 2-1
> [ 7.237468][ T201] usb 2-1: no default pinctrl state
> [ 7.243329][ T201] device: '2-1:1.0': device_add
> [ 7.248194][ T201] bus: 'usb': add device 2-1:1.0
> [ 7.253118][ T201] bus: 'usb': __driver_probe_device: matched device 2-1:1.0 with driver usb-storage
> [ 7.262452][ T201] bus: 'usb': really_probe: probing driver usb-storage with device 2-1:1.0
> [ 7.270986][ T201] usb-storage 2-1:1.0: no default pinctrl state
> [ 7.277185][ T201] usb-storage 2-1:1.0: USB Mass Storage device detected
> [ 7.284403][ T201] device: 'scsi_tmf_2': device_add
> [ 7.289424][ T201] bus: 'workqueue': add device scsi_tmf_2
> [ 7.295374][ T201] scsi host2: usb-storage 2-1:1.0
> [ 7.300416][ T201] device: 'host2': device_add
> [ 7.305042][ T201] bus: 'scsi': add device host2
> [ 7.309848][ T201] device: 'host2': device_add
> [ 7.314708][ T201] driver: 'usb-storage': driver_bound: bound to device '2-1:1.0'
> [ 7.322384][ T201] bus: 'usb': really_probe: bound device 2-1:1.0 to driver usb-storage
> [ 7.330593][ T201] device: 'ep_01': device_add
> [ 7.335248][ T201] device: 'ep_82': device_add
> [ 7.339884][ T201] driver: 'usb': driver_bound: bound to device '2-1'
> [ 7.346517][ T201] bus: 'usb': really_probe: bound device 2-1 to driver usb
> [ 7.353671][ T201] device: 'ep_00': device_add
> [ 7.486174][ T113] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 7.493398][ T113] ata2.01: hard resetting link
> [ 7.826136][ T113] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 7.833353][ T113] ata2.02: hard resetting link
> [ 8.166136][ T113] ata2.02: SATA link down (SStatus 0 SControl 300)
> [ 8.172603][ T113] ata2.03: hard resetting link
> [ 8.395831][ T201] scsi 2:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 4
> [ 8.404822][ T201] device: 'target2:0:0': device_add
> [ 8.409961][ T201] bus: 'scsi': add device target2:0:0
> [ 8.415397][ T201] device: '2:0:0:0': device_add
> [ 8.420330][ T201] bus: 'scsi': add device 2:0:0:0
> [ 8.425328][ T201] scsi 2:0:0:0: scheduling asynchronous probe
> [ 8.431348][ T201] device: '2:0:0:0': device_add
> [ 8.431369][ T22] bus: 'scsi': __driver_probe_device: matched device 2:0:0:0 with driver sd
> [ 8.436365][ T201] device: '2:0:0:0': device_add
> [ 8.444766][ T22] bus: 'scsi': really_probe: probing driver sd with device 2:0:0:0
> [ 8.457323][ T22] sd 2:0:0:0: no default pinctrl state
> [ 8.462925][ T22] device: '2:0:0:0': device_add
> [ 8.468998][ T22] sd 2:0:0:0: [sda] 122880000 512-byte logical blocks: (62.9 GB/58.6 GiB)
> [ 8.478142][ T22] sd 2:0:0:0: [sda] Write Protect is off
> [ 8.483700][ T22] sd 2:0:0:0: [sda] Mode Sense: 23 00 00 00
> [ 8.490182][ T22] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
> [ 8.500128][ T22] device: 'sda': device_add
> [ 8.505303][ T22] device: '8:0': device_add
> [ 8.507981][ T113] ata2.03: SATA link down (SStatus 0 SControl 300)
> [ 8.516425][ T113] ata2.04: hard resetting link
> [ 8.525164][ T22] sd 2:0:0:0: [sda] Attached SCSI removable disk
> [ 8.531387][ T22] driver: 'sd': driver_bound: bound to device '2:0:0:0'
> [ 8.538335][ T22] bus: 'scsi': really_probe: bound device 2:0:0:0 to driver sd
> [ 8.545813][ T22] sd 2:0:0:0: async probe completed
> [ 8.846145][ T113] ata2.04: SATA link down (SStatus 0 SControl 300)
> [ 8.852618][ T113] ata2.05: hard resetting link
> [ 9.186137][ T113] ata2.05: SATA link down (SStatus 0 SControl 300)
> [ 9.192606][ T113] ata2.06: hard resetting link
> [ 9.526131][ T113] ata2.06: SATA link down (SStatus 0 SControl 300)
> [ 9.532597][ T113] ata2.07: hard resetting link
> [ 9.866143][ T113] ata2.07: SATA link down (SStatus 0 SControl 300)
> [ 9.872700][ T113] ata2.00: ATA-6: WDC WD50ARC-5040-VOL#01, 0100 AX, max UDMA/133
> [ 9.880350][ T113] ata2.00: 976773168 sectors, multi 0: LBA48
> [ 9.886469][ T113] ata2.00: configured for UDMA/133
> [ 9.891543][ T113] ata2.01: ATA-6: Areca Archive, 0100 AX, max UDMA/133
> [ 9.898484][ T113] ata2.01: 23437498368 sectors, multi 0: LBA48
> [ 9.904761][ T113] ata2.01: configured for UDMA/133
> [ 9.909902][ T113] ata2: EH complete
> [ 9.914304][ T201] scsi 1:0:0:0: Direct-Access ATA WDC WD50ARC-5040 n/a PQ: 0 ANSI: 5
> [ 9.924024][ T201] device: 'target1:0:0': device_add
> [ 9.929148][ T201] bus: 'scsi': add device target1:0:0
> [ 9.934522][ T201] device: '1:0:0:0': device_add
> [ 9.939530][ T201] bus: 'scsi': add device 1:0:0:0
> [ 9.944518][ T201] scsi 1:0:0:0: scheduling asynchronous probe
> [ 9.950515][ T201] device: '1:0:0:0': device_add
> [ 9.950530][ T22] bus: 'scsi': __driver_probe_device: matched device 1:0:0:0 with driver sd
> [ 9.955446][ T201] device: '1:0:0:0': device_add
> [ 9.963876][ T22] bus: 'scsi': really_probe: probing driver sd with device 1:0:0:0
> [ 9.969160][ T201] scsi 1:1:0:0: Direct-Access ATA Areca Archive n/a PQ: 0 ANSI: 5
> [ 9.976414][ T22] sd 1:0:0:0: no default pinctrl state
> [ 9.986095][ T201] device: 'target1:1:0': device_add
> [ 9.990662][ T22] device: '1:0:0:0': device_add
> [ 9.995694][ T201] bus: 'scsi': add device target1:1:0
> [ 10.001292][ T22] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
> [ 10.005739][ T201] device: '1:1:0:0': device_add
> [ 10.014094][ T22] sd 1:0:0:0: [sdb] Write Protect is off
> [ 10.018913][ T201] bus: 'scsi': add device 1:1:0:0
> [ 10.024182][ T22] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
> [ 10.024521][ T22] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 10.029129][ T201] scsi 1:1:0:0: scheduling asynchronous probe
> [ 10.035141][ T22] sd 1:0:0:0: [sdb] Preferred minimum I/O size 512 bytes
> [ 10.044710][ T201] device: '1:1:0:0': device_add
> [ 10.050663][ T22] device: 'sdb': device_add
> [ 10.057645][ T201] device: '1:1:0:0': device_add
> [ 10.062473][ T8] bus: 'scsi': __driver_probe_device: matched device 1:1:0:0 with driver sd
> [ 10.073944][ T22] device: '8:16': device_add
> [ 10.080044][ T8] bus: 'scsi': really_probe: probing driver sd with device 1:1:0:0
> [ 10.085794][ T22] sd 1:0:0:0: [sdb] Attached SCSI removable disk
> [ 10.092278][ T8] sd 1:1:0:0: no default pinctrl state
> [ 10.098515][ T22] driver: 'sd': driver_bound: bound to device '1:0:0:0'
> [ 10.103921][ T8] device: '1:1:0:0': device_add
> [ 10.110722][ T22] bus: 'scsi': really_probe: bound device 1:0:0:0 to driver sd
> [ 10.116166][ T8] sd 1:1:0:0: [sdc] 23437498368 512-byte logical blocks: (12.0 TB/10.9 TiB)
> [ 10.122869][ T22] sd 1:0:0:0: async probe completed
> [ 10.131515][ T8] sd 1:1:0:0: [sdc] Write Protect is off
> [ 10.142064][ T8] sd 1:1:0:0: [sdc] Mode Sense: 00 3a 00 00
> [ 10.147997][ T8] sd 1:1:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 10.157973][ T8] sd 1:1:0:0: [sdc] Preferred minimum I/O size 512 bytes
> [ 10.164952][ T8] device: 'sdc': device_add
> [ 10.169986][ T8] device: '8:32': device_add
> [ 10.175532][ T8] sd 1:1:0:0: [sdc] Attached SCSI removable disk
> [ 10.181753][ T8] driver: 'sd': driver_bound: bound to device '1:1:0:0'
> [ 10.188650][ T8] bus: 'scsi': really_probe: bound device 1:1:0:0 to driver sd
> [ 10.196111][ T8] sd 1:1:0:0: async probe completed
>
> Marius Dinu
>
--
Damien Le Moal
Western Digital Research
next prev parent reply other threads:[~2023-01-30 7:37 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-01 19:21 Bug report for ahci-mvebu driver Dinu Marius
2022-11-06 7:05 ` Damien Le Moal
2022-11-07 9:22 ` marius
2022-11-08 6:27 ` Damien Le Moal
2022-11-09 19:52 ` marius
2022-11-09 19:55 ` marius
2022-11-10 2:05 ` Damien Le Moal
2022-11-11 22:32 ` marius
2022-11-12 1:57 ` Damien Le Moal
2022-11-14 20:52 ` marius
2022-11-15 3:02 ` Damien Le Moal
2022-11-15 7:28 ` marius
2022-11-15 8:10 ` Damien Le Moal
2022-11-18 18:24 ` Dinu Marius
2022-11-24 2:40 ` Damien Le Moal
2022-12-04 1:41 ` marius
2022-12-04 10:22 ` Pali Rohár
2022-12-04 21:14 ` marius
2022-12-04 21:46 ` Pali Rohár
2022-12-05 2:02 ` Damien Le Moal
2022-12-06 6:08 ` Damien Le Moal
2022-12-08 21:26 ` Pali Rohár
2022-12-09 1:54 ` Damien Le Moal
2022-12-07 18:27 ` marius
2022-12-07 21:54 ` Damien Le Moal
2022-12-07 22:51 ` Damien Le Moal
2022-12-08 18:06 ` marius
2022-12-09 0:34 ` Damien Le Moal
2022-12-09 2:58 ` Damien Le Moal
2022-12-09 7:31 ` marius
2022-12-09 9:28 ` Damien Le Moal
2022-12-09 18:30 ` marius
2023-01-14 18:01 ` marius
2023-01-15 23:37 ` Damien Le Moal
2023-01-17 8:26 ` Damien Le Moal
2023-01-18 19:43 ` marius
2023-01-19 0:29 ` Damien Le Moal
2023-01-19 18:46 ` marius
2023-01-23 7:02 ` Damien Le Moal
2023-01-23 20:00 ` marius
2023-01-23 23:00 ` Damien Le Moal
2023-01-24 8:04 ` marius
2023-01-24 9:53 ` Damien Le Moal
2023-01-24 17:02 ` marius
2023-01-27 5:13 ` Damien Le Moal
2023-01-27 6:28 ` Damien Le Moal
2023-01-28 17:08 ` marius
2023-01-29 2:23 ` Damien Le Moal
2023-01-29 10:24 ` marius
2023-01-30 1:16 ` Damien Le Moal
2023-01-30 2:38 ` Damien Le Moal
2023-01-30 7:23 ` marius
2023-01-30 7:37 ` Damien Le Moal [this message]
2023-01-30 23:22 ` Damien Le Moal
2023-01-31 7:20 ` marius
2023-01-31 7:28 ` Damien Le Moal
2023-02-07 18:40 ` marius
2023-02-07 23:39 ` Damien Le Moal
2023-02-08 12:17 ` marius
2023-02-08 23:00 ` Damien Le Moal
2023-02-12 13:14 ` marius
2023-02-12 23:11 ` Damien Le Moal
2023-01-24 17:06 ` Bug report for sata_via driver marius
2023-01-25 1:26 ` Damien Le Moal
2022-11-26 14:26 ` Bug report for ahci-mvebu driver Pali Rohár
2023-01-23 9:10 ` Hajo Noerenberg
2023-01-23 12:13 ` Damien Le Moal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=071bf5d4-4007-6779-60fd-82ec58dd44fe@opensource.wdc.com \
--to=damien.lemoal@opensource.wdc.com \
--cc=linux-ide@vger.kernel.org \
--cc=marius@psihoexpert.ro \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.