From: marius@psihoexpert.ro
To: "Damien Le Moal" <damien.lemoal@opensource.wdc.com>
Cc: linux-ide@vger.kernel.org
Subject: Re: Bug report for ahci-mvebu driver
Date: Mon, 07 Nov 2022 09:22:51 +0000 [thread overview]
Message-ID: <3c94c10243fa1cd2b0128db846298a11@psihoexpert.ro> (raw)
In-Reply-To: <126ce7f2-3de2-9e75-7920-09d78c224d76@opensource.wdc.com>
[-- Attachment #1: Type: text/plain, Size: 1387 bytes --]
November 6, 2022 9:05 AM, "Damien Le Moal" <damien.lemoal@opensource.wdc.com> wrote:
> Can you try current mainline 6.1-rc kernel ? Not going to debug 5.15.
> Debugging should be done on the latest kernel and any bug fix backported.
OK. I have a bootable kernel v6.1-rc3, but no rootfs yet. I load it via tftp. I built it from github.com/torvalds/linux using OpenWrt toolchain. Bootlog is attached. At 17 seconds I connect the DAS.
>> The same router works perfectly when I connect a laptop HDD.
>
> You mean an external single HDD connected with an eSATA port ?
Yes, to show that the hardware is not defective.
> What kernel version is running on that older Linksys box ?
5.10
>> [--- Areca connected ---]
>> <6>[88761.966331] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
>> <6>[88761.975472] ata1.15: Port Multiplier 1.2, 0x197b:0x0325 r193, 8 ports, feat 0xf/0x1f
>
> This one seems OK with the PHY detection and it links up. Let me know the
> kernel version and we can see what changed between the older kernel and
> 5.15. But you should still try latest 6.1-rc if possible.
I don't think there is a change in kernel. It's just a diferent driver in use: ahci-mvebu vs. sata-mv.
BTW, is sata-mv compatible with this hardware? It won't auto-load instead of ahci-mvebu if ahci-mvebu is missing.
Thank you for your reply.
Marius Dinu
[-- Attachment #2: serial2.txt --]
[-- Type: text/plain, Size: 75947 bytes --]
\0\0\0\0\0
\rBootROM - 1.73
\rBooting from NAND flash
\rGeneral initialization - Version: 1.0.0
\rDetected Device ID 6820
\rHigh speed PHY - Version: 2.0
\rInit RD NAS topology Serdes Lane 3 is USB3
\rSerdes Lane 4 is SGMII
\rboard SerDes lanes topology details:
\r | Lane # | Speed | Type |
\r --------------------------------
\r | 0 | 06 | SATA0 |
\r | 1 | 05 | PCIe0 |
\r | 2 | 06 | SATA1 |
\r | 3 | 05 | USB3 HOST1 |
\r | 4 | 05 | PCIe1 |
\r | 5 | 00 | SGMII2 |
\r --------------------------------
\r:** Link is Gen1, check the EP capability
\rPCIe, Idx 0: Link upgraded to Gen2 based on client cpabilities
\r:** Link is Gen1, check the EP capability
\rPCIe, Idx 1: remains Gen1
\rHigh speed PHY - Ended Successfully
\rDDR3 Training Sequence - Ver TIP-1.26.0
\rmvSysEnvGetTopologyUpdateInfo: TWSI Read failed
\rDDR3 Training Sequence - Switching XBAR Window to FastPath Window
\rDDR3 Training Sequence - Ended Successfully
\rNot detected suspend to RAM indication
\rBootROM: Image checksum verification PASSED
__ __ _ _
| \/ | __ _ _ ____ _____| | |
| |\/| |/ _` | '__\ \ / / _ \ | |
| | | | (_| | | \ V / __/ | |
|_| |_|\__,_|_| \_/ \___|_|_|
_ _ ____ _
| | | | | __ ) ___ ___ | |_
| | | |___| _ \ / _ \ / _ \| __|
| |_| |___| |_) | (_) | (_) | |_
\___/ |____/ \___/ \___/ \__|
** LOADER **
U-Boot 2013.01 (Mar 27 2015 - 16:50:46) Marvell version: 2014_T3.0p6
Boot version : v1.0.13
Board: RD-NAS-88F6820-DDR3
SoC: MV88F6820 Rev A0
running 2 CPUs
CPU: ARM Cortex A9 MPCore (Rev 1) LE
CPU 0
CPU @ 1600 [MHz]
L2 @ 800 [MHz]
TClock @ 200 [MHz]
DDR @ 800 [MHz]
DDR 32 Bit Width, FastPath Memory Access, DLB Enabled, ECC Disabled
DRAM: 512 MiB
Map: Code: 0x1fea9000:0x1ff7632c
BSS: 0x1ffef6b4
Stack: 0x1f9a8f20
Heap: 0x1f9a9000:0x1fea9000
raise: Signal # 8 caught
U-ENV offset == 0x200000
raise: Signal # 8 caught
U-ENV offset == 0x200000
U-Boot Environment: 0x00200000:0x00220000 (NAND)
NAND: 128 MiB
MMC: mv_sdh: 0
DEVINFO offset == 0x900000
U-ENV offset == 0x200000
U-ENV offset == 0x200000
S-ENV offset == 0x240000
#### auto_recovery ####
[u_env] get auto_recovery == yes
[u_env] get auto_recovery == yes
[u_env] get boot_part == 2
[u_env] get boot_part_ready == 3
auto_recovery enabled:1, boot_part:2, boot_part_ready:3
S-ENV offset == 0x240000
[boot_count_read] block:0x240000, size:128KB, records:64
[boot_count_read_record] boot_count:1, next_record:33
[boot_count_write] erase:0, auto_recovery->block_offset:0x240000 offset=0x250800
Updating boot_count ...
[boot_count_write] offset:0x250800 , length:2048
done
PCI-e 0 (IF 0 - bus 0) Root Complex Interface, Detected Link X1, GEN 2.0
PCI-e 1 (IF 1 - bus 1) Root Complex Interface, Detected Link X1, GEN 1.1
USB2.0 0: Host Mode
USB3.0 1: Host Mode
USB3.0 0: Host Mode
Board configuration detected:
mvEthE6171SwitchBasicInit init
Net:
| port | Interface | PHY address |
|--------|-----------|--------------|
| egiga0 | RGMII | 0x01 |
| egiga1 | SGMII | 0x00 |
egiga0 [PRIME], egiga1
auto_recovery_check changes bootcmd: run altnandboot
Hit any key to stop autoboot: 3 \b\b\b 0
Marvell>> \b \b\b \b\b \b\b \b\b \brun cmd\b \b\b \b\b \bbootcmd_tftp
Using egiga0 device
TFTP from server 192.168.1.254; our IP address is 192.168.1.1
Filename 'uImage'.
Load address: 0x2000000
Loading: *\bT #################################################################
#################################################################
#################################################################
#################################################################
################################
119.1 KiB/s
done
Bytes transferred = 4272040 (412fa8 hex)
Using egiga0 device
TFTP from server 192.168.1.254; our IP address is 192.168.1.1
Filename 'armada-38x-modular.dtb'.
Load address: 0x1000000
Loading: *\b##
137.7 KiB/s
done
Bytes transferred = 20015 (4e2f hex)
## Flattened Device Tree blob at 01000000
Booting using the fdt blob at 0x01000000
Loading Device Tree to 00ff8000, end 00fffe2e ... OK
Starting Device Tree update ('fdt_skip_update' = no)
Updating device tree failed
Starting kernel ...
[ 0.000000][ T0] Booting Linux on physical CPU 0x0
[ 0.000000][ T0] Linux version 6.1.0-rc3M95D-test (marius95@GRAPHIM) (arm-openwrt-linux-muslgnueabi-gcc (OpenWrt GCC 12.2.0 r20954+11-cb24be47ff) 12.2.0, GNU ld (GNU Binutils) 2.38) #1 SMP Sun Nov 6 22:29:22 EET 2022
[ 0.000000][ T0] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d
[ 0.000000][ T0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000][ T0] OF: fdt: Machine model: Linksys WRT1900ACv2
[ 0.000000][ T0] Memory policy: Data cache writealloc
[ 0.000000][ T0] Zone ranges:
[ 0.000000][ T0] Normal [mem 0x0000000000000000-0x000000001fffffff]
[ 0.000000][ T0] Movable zone start for each node
[ 0.000000][ T0] Early memory node ranges
[ 0.000000][ T0] node 0: [mem 0x0000000000000000-0x000000001fffffff]
[ 0.000000][ T0] Initmem setup node 0 [mem 0x0000000000000000-0x000000001fffffff]
[ 0.000000][ T0] percpu: Embedded 8 pages/cpu s9424 r0 d23344 u32768
[ 0.000000][ T0] pcpu-alloc: s9424 r0 d23344 u32768 alloc=8*4096
[ 0.000000][ T0] pcpu-alloc: [0] 0 [0] 1
[ 0.000000][ T0] Built 1 zonelists, mobility grouping on. Total pages: 130048
[ 0.000000][ T0] Kernel command line: console=ttyS0,115200 earlyprintk nfcConfig=4bitecc mtdparts=armada-nand:2048K(uboot)ro,256K(u_env),256K(s_env),1m@9m(devinfo),40m@10m(kernel),34m@16m(rootfs),40m@50m(alt_kernel),34m@56m(alt_rootfs),80m@10m(ubifs),-@90m(syscfg) root=/dev/sda rootdelay=60
[ 0.000000][ T0] Unknown kernel command line parameters "earlyprintk nfcConfig=4bitecc", will be passed to user space.
[ 0.000000][ T0] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000][ T0] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[ 0.000000][ T0] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000][ T0] Memory: 509052K/524288K available (6088K kernel code, 1024K rwdata, 1628K rodata, 1024K init, 327K bss, 15236K reserved, 0K cma-reserved)
[ 0.000000][ T0] rcu: Hierarchical RCU implementation.
[ 0.000000][ T0] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000][ T0] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000][ T0] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000][ T0] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000][ T0] L2C: DT/platform modifies aux control register: 0x06070000 -> 0x16070000
[ 0.000000][ T0] L2C-310 enabling early BRESP for Cortex-A9
[ 0.000000][ T0] L2C-310 full line of zeros enabled for Cortex-A9
[ 0.000000][ T0] L2C-310 D prefetch enabled, offset 1 lines
[ 0.000000][ T0] L2C-310 dynamic clock gating enabled, standby mode enabled
[ 0.000000][ T0] L2C-310 Coherent cache controller enabled, 16 ways, 1024 kB
[ 0.000000][ T0] L2C-310 Coherent: CACHE_ID 0x410054c9, AUX_CTRL 0x56070001
[ 0.000000][ T0] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000001][ T0] sched_clock: 64 bits at 400MHz, resolution 2ns, wraps every 4398046511103ns
[ 0.000012][ T0] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x5c4093a7d1, max_idle_ns: 440795210635 ns
[ 0.000026][ T0] Switching to timer-based delay loop, resolution 2ns
[ 0.000158][ T0] Ignoring duplicate/late registration of read_current_timer delay
[ 0.000162][ T0] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
[ 0.000287][ T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 800.00 BogoMIPS (lpj=4000000)
[ 0.000294][ T0] pid_max: default: 32768 minimum: 301
[ 0.000315][ T0] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.000321][ T0] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.000529][ T0] CPU: Testing write buffer coherency: ok
[ 0.000541][ T0] Spectre V2: workarounds disabled by configuration
[ 0.000760][ T1] Setting up static identity map for 0x100000 - 0x100060
[ 0.000834][ T1] mvebu-soc-id: MVEBU SoC ID=0x6820, Rev=0x4
[ 0.000908][ T1] mvebu-pmsu: Initializing Power Management Service Unit
[ 0.000965][ T1] rcu: Hierarchical SRCU implementation.
[ 0.000967][ T1] rcu: Max phase no-delay instances is 1000.
[ 0.001297][ T1] smp: Bringing up secondary CPUs ...
[ 0.001430][ T1] Booting CPU 1
[ 0.001588][ T1] smp: Brought up 1 node, 2 CPUs
[ 0.001591][ T1] SMP: Total of 2 processors activated (1600.00 BogoMIPS).
[ 0.001595][ T1] CPU: All CPU(s) started in SVC mode.
[ 0.001773][ T1] devtmpfs: initialized
[ 0.008109][ T1] device: 'platform': device_add
[ 0.008141][ T1] bus: 'platform': registered
[ 0.008158][ T1] bus: 'cpu': registered
[ 0.008162][ T1] device: 'cpu': device_add
[ 0.008299][ T1] bus: 'container': registered
[ 0.008306][ T1] device: 'container': device_add
[ 0.008848][ T1] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.008984][ T1] bus: 'workqueue': registered
[ 0.008988][ T1] device: 'workqueue': device_add
[ 0.009005][ T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.009014][ T1] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.009055][ T1] pinctrl core: initialized pinctrl subsystem
[ 0.009321][ T1] bus: 'gpio': registered
[ 0.009325][ T1] bus: 'gpio': add driver gpio_stub_drv
[ 0.009343][ T1] device class 'regulator': registering
[ 0.009363][ T1] Registering platform device 'reg-dummy'. Parent at platform
[ 0.009367][ T1] device: 'reg-dummy': device_add
[ 0.009373][ T1] bus: 'platform': add device reg-dummy
[ 0.009391][ T1] bus: 'platform': add driver reg-dummy
[ 0.009397][ T1] bus: 'platform': __driver_probe_device: matched device reg-dummy with driver reg-dummy
[ 0.009402][ T1] bus: 'platform': really_probe: probing driver reg-dummy with device reg-dummy
[ 0.009411][ T1] reg-dummy reg-dummy: no default pinctrl state
[ 0.009440][ T1] regulator-dummy: no parameters, enabled
[ 0.009551][ T1] device: 'regulator.0': device_add
[ 0.009595][ T1] driver: 'reg-dummy': driver_bound: bound to device 'reg-dummy'
[ 0.009607][ T1] bus: 'platform': really_probe: bound device reg-dummy to driver reg-dummy
[ 0.009637][ T1] bus: 'soc': registered
[ 0.010126][ T1] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.010261][ T1] device: 'soc0': device_add
[ 0.010273][ T1] bus: 'soc': add device soc0
[ 0.011284][ T1] device class 'bdi': registering
[ 0.011407][ T1] bus: 'platform': add driver ramoops
[ 0.011422][ T1] device class 'pci_bus': registering
[ 0.011443][ T1] bus: 'pci': registered
[ 0.011458][ T1] bus: 'pci_express': registered
[ 0.011460][ T1] device class 'tty': registering
[ 0.011468][ T1] device class 'devlink': registering
[ 0.011483][ T1] bus: 'platform': add driver sram
[ 0.011716][ T1] bus: 'spi': registered
[ 0.011718][ T1] device class 'spi_master': registering
[ 0.011739][ T1] bus: 'i2c': registered
[ 0.011741][ T1] bus: 'i2c': add driver dummy
[ 0.011754][ T1] thermal_sys: Registered thermal governor 'step_wise'
[ 0.011756][ T1] device class 'thermal': registering
[ 0.011887][ T1] mvebu-pmsu: CPU hotplug support is currently broken on Armada 38x: disabling
[ 0.011891][ T1] mvebu-pmsu: CPU idle is currently broken on Armada 38x: disabling
[ 0.011913][ T1] device class 'dma': registering
[ 0.012063][ T1] bus: 'platform': add driver mvebu-uart-clock
[ 0.012079][ T1] bus: 'platform': add driver mvebu-uart
[ 0.012253][ T1] device: 'pmu': device_add
[ 0.012264][ T1] bus: 'platform': add device pmu
[ 0.012320][ T1] device: 'soc': device_add
[ 0.012445][ T1] bus: 'platform': add device soc
[ 0.012575][ T1] i2c@11000 Linked as a fwnode consumer to pinctrl@18000
[ 0.013477][ T1] device: 'fff00000.bootrom': device_add
[ 0.013487][ T1] bus: 'platform': add device fff00000.bootrom
[ 0.013527][ T1] device: 'soc:internal-regs': device_add
[ 0.013536][ T1] bus: 'platform': add device soc:internal-regs
[ 0.013684][ T1] device: 'f1001400.sdramc': device_add
[ 0.013806][ T1] bus: 'platform': add device f1001400.sdramc
[ 0.013858][ T1] device: 'f1008000.cache-controller': device_add
[ 0.013866][ T1] bus: 'platform': add device f1008000.cache-controller
[ 0.013912][ T1] device: 'f100c000.scu': device_add
[ 0.013920][ T1] bus: 'platform': add device f100c000.scu
[ 0.013967][ T1] device: 'f100c200.timer': device_add
[ 0.014082][ T1] bus: 'platform': add device f100c200.timer
[ 0.014131][ T1] device: 'f100c600.timer': device_add
[ 0.014139][ T1] bus: 'platform': add device f100c600.timer
[ 0.014187][ T1] device: 'f1011000.i2c': device_add
[ 0.014196][ T1] bus: 'platform': add device f1011000.i2c
[ 0.014262][ T1] device: 'f1012000.serial': device_add
[ 0.014377][ T1] bus: 'platform': add device f1012000.serial
[ 0.014431][ T1] device: 'f1018000.pinctrl': device_add
[ 0.014439][ T1] bus: 'platform': add device f1018000.pinctrl
[ 0.014473][ T1] device: 'platform:f1018000.pinctrl--platform:f1011000.i2c': device_add
[ 0.014613][ T1] devices_kset: Moving f1011000.i2c to end of list
[ 0.014617][ T1] platform f1011000.i2c: Linked as a consumer to f1018000.pinctrl
[ 0.014621][ T1] i2c@11000 Dropping the fwnode link to pinctrl@18000
[ 0.014678][ T1] device: 'f1018100.gpio': device_add
[ 0.014686][ T1] bus: 'platform': add device f1018100.gpio
[ 0.014751][ T1] device: 'f1018140.gpio': device_add
[ 0.014759][ T1] bus: 'platform': add device f1018140.gpio
[ 0.014811][ T1] device: 'f1018200.system-controller': device_add
[ 0.014820][ T1] bus: 'platform': add device f1018200.system-controller
[ 0.015104][ T1] device: 'f1018300.phy': device_add
[ 0.015113][ T1] bus: 'platform': add device f1018300.phy
[ 0.015191][ T1] device: 'f1020000.mbus-controller': device_add
[ 0.015200][ T1] bus: 'platform': add device f1020000.mbus-controller
[ 0.015265][ T1] device: 'f1020300.timer': device_add
[ 0.015274][ T1] bus: 'platform': add device f1020300.timer
[ 0.015457][ T1] device: 'f1020300.watchdog': device_add
[ 0.015465][ T1] bus: 'platform': add device f1020300.watchdog
[ 0.015512][ T1] device: 'f1020800.cpurst': device_add
[ 0.015521][ T1] bus: 'platform': add device f1020800.cpurst
[ 0.015568][ T1] device: 'f1020d20.mpcore-soc-ctrl': device_add
[ 0.015576][ T1] bus: 'platform': add device f1020d20.mpcore-soc-ctrl
[ 0.015734][ T1] device: 'f1021010.coherency-fabric': device_add
[ 0.015742][ T1] bus: 'platform': add device f1021010.coherency-fabric
[ 0.015790][ T1] device: 'f1022000.pmsu': device_add
[ 0.015798][ T1] bus: 'platform': add device f1022000.pmsu
[ 0.015847][ T1] device: 'f1070000.ethernet': device_add
[ 0.015856][ T1] bus: 'platform': add device f1070000.ethernet
[ 0.016020][ T1] device: 'f1034000.ethernet': device_add
[ 0.016028][ T1] bus: 'platform': add device f1034000.ethernet
[ 0.016082][ T1] device: 'f1058000.usb': device_add
[ 0.016091][ T1] bus: 'platform': add device f1058000.usb
[ 0.016149][ T1] device: 'f1060800.xor': device_add
[ 0.016158][ T1] bus: 'platform': add device f1060800.xor
[ 0.016333][ T1] device: 'f1060900.xor': device_add
[ 0.016341][ T1] bus: 'platform': add device f1060900.xor
[ 0.016392][ T1] device: 'f1072004.mdio': device_add
[ 0.016400][ T1] bus: 'platform': add device f1072004.mdio
[ 0.016456][ T1] device: 'f1090000.crypto': device_add
[ 0.016465][ T1] bus: 'platform': add device f1090000.crypto
[ 0.016626][ T1] device: 'f10a8000.sata': device_add
[ 0.016635][ T1] bus: 'platform': add device f10a8000.sata
[ 0.016682][ T1] device: 'f10c8000.bm': device_add
[ 0.016690][ T1] bus: 'platform': add device f10c8000.bm
[ 0.016750][ T1] device: 'f10e4078.thermal': device_add
[ 0.016758][ T1] bus: 'platform': add device f10e4078.thermal
[ 0.016930][ T1] device: 'f10d0000.nand-controller': device_add
[ 0.016938][ T1] bus: 'platform': add device f10d0000.nand-controller
[ 0.017011][ T1] device: 'f10f8000.usb3': device_add
[ 0.017020][ T1] bus: 'platform': add device f10f8000.usb3
[ 0.017065][ T1] device: 'f1100000.sa-sram0': device_add
[ 0.017187][ T1] bus: 'platform': add device f1100000.sa-sram0
[ 0.017210][ T1] bus: 'platform': __driver_probe_device: matched device f1100000.sa-sram0 with driver sram
[ 0.017214][ T1] bus: 'platform': really_probe: probing driver sram with device f1100000.sa-sram0
[ 0.017223][ T1] sram f1100000.sa-sram0: no pinctrl handle
[ 0.017264][ T1] driver: 'sram': driver_bound: bound to device 'f1100000.sa-sram0'
[ 0.017286][ T1] bus: 'platform': really_probe: bound device f1100000.sa-sram0 to driver sram
[ 0.017313][ T1] device: 'f1110000.sa-sram1': device_add
[ 0.017323][ T1] bus: 'platform': add device f1110000.sa-sram1
[ 0.017467][ T1] bus: 'platform': __driver_probe_device: matched device f1110000.sa-sram1 with driver sram
[ 0.017471][ T1] bus: 'platform': really_probe: probing driver sram with device f1110000.sa-sram1
[ 0.017478][ T1] sram f1110000.sa-sram1: no pinctrl handle
[ 0.017506][ T1] driver: 'sram': driver_bound: bound to device 'f1110000.sa-sram1'
[ 0.017526][ T1] bus: 'platform': really_probe: bound device f1110000.sa-sram1 to driver sram
[ 0.017553][ T1] device: 'f1200000.bm-bppi': device_add
[ 0.017562][ T1] bus: 'platform': add device f1200000.bm-bppi
[ 0.017587][ T1] bus: 'platform': __driver_probe_device: matched device f1200000.bm-bppi with driver sram
[ 0.017591][ T1] bus: 'platform': really_probe: probing driver sram with device f1200000.bm-bppi
[ 0.017715][ T1] sram f1200000.bm-bppi: no pinctrl handle
[ 0.017862][ T1] driver: 'sram': driver_bound: bound to device 'f1200000.bm-bppi'
[ 0.017882][ T1] bus: 'platform': really_probe: bound device f1200000.bm-bppi to driver sram
[ 0.017901][ T1] device: 'soc:pcie': device_add
[ 0.017911][ T1] bus: 'platform': add device soc:pcie
[ 0.017953][ T1] device: 'usb3_1-phy': device_add
[ 0.017962][ T1] bus: 'platform': add device usb3_1-phy
[ 0.018107][ T1] usb3_1-phy Linked as a fwnode consumer to usb3_1-vbus
[ 0.018127][ T1] device: 'usb3_1-vbus': device_add
[ 0.018135][ T1] bus: 'platform': add device usb3_1-vbus
[ 0.018160][ T1] usb3_1-vbus Linked as a fwnode consumer to pinctrl@18000
[ 0.018174][ T1] usb3_1-vbus Linked as a fwnode consumer to gpio@18140
[ 0.018190][ T1] device: 'platform:usb3_1-vbus--platform:usb3_1-phy': device_add
[ 0.018220][ T1] devices_kset: Moving usb3_1-phy to end of list
[ 0.018224][ T1] platform usb3_1-phy: Linked as a consumer to usb3_1-vbus
[ 0.018227][ T1] usb3_1-phy Dropping the fwnode link to usb3_1-vbus
[ 0.018234][ T1] device: 'platform:f1018140.gpio--platform:usb3_1-vbus': device_add
[ 0.018377][ T1] devices_kset: Moving usb3_1-vbus to end of list
[ 0.018380][ T1] devices_kset: Moving usb3_1-phy to end of list
[ 0.018383][ T1] platform usb3_1-vbus: Linked as a consumer to f1018140.gpio
[ 0.018386][ T1] usb3_1-vbus Dropping the fwnode link to gpio@18140
[ 0.018393][ T1] device: 'platform:f1018000.pinctrl--platform:usb3_1-vbus': device_add
[ 0.018419][ T1] devices_kset: Moving usb3_1-vbus to end of list
[ 0.018422][ T1] devices_kset: Moving usb3_1-phy to end of list
[ 0.018425][ T1] platform usb3_1-vbus: Linked as a consumer to f1018000.pinctrl
[ 0.018428][ T1] usb3_1-vbus Dropping the fwnode link to pinctrl@18000
[ 0.018454][ T1] device: 'gpio-keys': device_add
[ 0.018464][ T1] bus: 'platform': add device gpio-keys
[ 0.018607][ T1] gpio-keys Linked as a fwnode consumer to pinctrl@18000
[ 0.018621][ T1] button-wps Linked as a fwnode consumer to gpio@18100
[ 0.018632][ T1] button-reset Linked as a fwnode consumer to gpio@18100
[ 0.018640][ T1] device: 'platform:f1018000.pinctrl--platform:gpio-keys': device_add
[ 0.018669][ T1] devices_kset: Moving gpio-keys to end of list
[ 0.018672][ T1] platform gpio-keys: Linked as a consumer to f1018000.pinctrl
[ 0.018675][ T1] gpio-keys Dropping the fwnode link to pinctrl@18000
[ 0.018692][ T1] device: 'platform:f1018100.gpio--platform:gpio-keys': device_add
[ 0.018837][ T1] platform gpio-keys: Linked as a sync state only consumer to f1018100.gpio
[ 0.018853][ T1] device: 'gpio-leds': device_add
[ 0.018861][ T1] bus: 'platform': add device gpio-leds
[ 0.018885][ T1] gpio-leds Linked as a fwnode consumer to pinctrl@18000
[ 0.018896][ T1] power Linked as a fwnode consumer to gpio@18140
[ 0.018907][ T1] sata Linked as a fwnode consumer to gpio@18140
[ 0.018919][ T1] device: 'platform:f1018000.pinctrl--platform:gpio-leds': device_add
[ 0.018949][ T1] devices_kset: Moving gpio-leds to end of list
[ 0.018952][ T1] platform gpio-leds: Linked as a consumer to f1018000.pinctrl
[ 0.018955][ T1] gpio-leds Dropping the fwnode link to pinctrl@18000
[ 0.019094][ T1] device: 'platform:f1018140.gpio--platform:gpio-leds': device_add
[ 0.019122][ T1] platform gpio-leds: Linked as a sync state only consumer to f1018140.gpio
[ 0.019158][ T1] device: 'cpu0': device_add
[ 0.019167][ T1] bus: 'cpu': add device cpu0
[ 0.019196][ T1] device: 'cpu1': device_add
[ 0.019204][ T1] bus: 'cpu': add device cpu1
[ 0.025998][ T1] device: 'writeback': device_add
[ 0.026009][ T1] bus: 'workqueue': add device writeback
[ 0.026274][ T1] cryptd: max_cpu_qlen set to 1000
[ 0.026341][ T1] device class 'block': registering
[ 0.026585][ T1] raid6: skipped pq benchmark and selected neonx8
[ 0.026588][ T1] raid6: using neon recovery algorithm
[ 0.026621][ T1] bus: 'platform': add driver reg-fixed-voltage
[ 0.026677][ T1] bus: 'platform': __driver_probe_device: matched device usb3_1-vbus with driver reg-fixed-voltage
[ 0.026687][ T1] platform usb3_1-vbus: error -EPROBE_DEFER: supplier f1018140.gpio not ready
[ 0.026693][ T1] platform usb3_1-vbus: Added to deferred list
[ 0.026716][ T1] device class 'misc': registering
[ 0.027630][ T1] device class 'scsi_host': registering
[ 0.027666][ T1] bus: 'scsi': registered
[ 0.027669][ T1] device class 'scsi_device': registering
[ 0.027811][ T1] SCSI subsystem initialized
[ 0.027856][ T1] device class 'ata_link': registering
[ 0.027869][ T1] device class 'ata_port': registering
[ 0.027878][ T1] device class 'ata_device': registering
[ 0.027893][ T1] libata version 3.00 loaded.
[ 0.027917][ T1] bus: 'ulpi': registered
[ 0.027936][ T1] bus: 'usb': registered
[ 0.027941][ T1] bus: 'usb': add driver usbfs
[ 0.028233][ T1] usbcore: registered new interface driver usbfs
[ 0.028238][ T1] bus: 'usb': add driver hub
[ 0.028253][ T1] usbcore: registered new interface driver hub
[ 0.028260][ T1] bus: 'usb': add driver usb
[ 0.028273][ T1] usbcore: registered new device driver usb
[ 0.028276][ T1] bus: 'platform': add driver usb_phy_generic
[ 0.028308][ T1] bus: 'platform': __driver_probe_device: matched device usb3_1-phy with driver usb_phy_generic
[ 0.028316][ T1] platform usb3_1-phy: error -EPROBE_DEFER: supplier usb3_1-vbus not ready
[ 0.028320][ T1] platform usb3_1-phy: Added to deferred list
[ 0.028335][ T1] device class 'udc': registering
[ 0.028358][ T1] bus: 'gadget': registered
[ 0.028509][ T1] bus: 'typec': registered
[ 0.028512][ T1] device class 'typec_mux': registering
[ 0.028522][ T1] device class 'retimer': registering
[ 0.028531][ T1] device class 'typec': registering
[ 0.028547][ T1] device class 'usb_power_delivery': registering
[ 0.028556][ T1] device class 'usb_role': registering
[ 0.028571][ T1] device class 'hwmon': registering
[ 0.028579][ T1] EDAC MC: Ver: 3.0.0
[ 0.028591][ T1] bus: 'edac': registered
[ 0.028595][ T1] device: 'edac': device_add
[ 0.028604][ T1] device: 'mc': device_add
[ 0.028608][ T1] bus: 'edac': add device mc
[ 0.028661][ T1] device class 'leds': registering
[ 0.028983][ T1] bus: 'nvmem': registered
[ 0.029025][ T1] device class 'watchdog': registering
[ 0.029106][ T1] clocksource: Switched to clocksource arm_global_timer
[ 0.029824][ T1] device class 'mem': registering
[ 0.029841][ T1] device: 'mem': device_add
[ 0.029906][ T1] device: 'null': device_add
[ 0.029948][ T1] device: 'port': device_add
[ 0.029994][ T1] device: 'zero': device_add
[ 0.030342][ T1] device: 'full': device_add
[ 0.030378][ T1] device: 'random': device_add
[ 0.030414][ T1] device: 'urandom': device_add
[ 0.030450][ T1] device: 'kmsg': device_add
[ 0.030638][ T1] device: 'tty': device_add
[ 0.030679][ T1] device: 'console': device_add
[ 0.030716][ T1] PCI: CLS 0 bytes, default 64
[ 0.030994][ T1] bus: 'clocksource': registered
[ 0.030999][ T1] device: 'clocksource': device_add
[ 0.031007][ T1] device: 'clocksource0': device_add
[ 0.031016][ T1] bus: 'clocksource': add device clocksource0
[ 0.031034][ T1] bus: 'platform': add driver alarmtimer
[ 0.031215][ T1] bus: 'clockevents': registered
[ 0.031219][ T1] device: 'clockevents': device_add
[ 0.031227][ T1] device: 'clockevent0': device_add
[ 0.031232][ T1] bus: 'clockevents': add device clockevent0
[ 0.031249][ T1] device: 'clockevent1': device_add
[ 0.031255][ T1] bus: 'clockevents': add device clockevent1
[ 0.031408][ T1] device: 'broadcast': device_add
[ 0.031413][ T1] bus: 'clockevents': add device broadcast
[ 0.031518][ T1] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 0.032144][ T1] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.077283][ T1] xor: measuring software checksum speed
[ 0.081065][ T1] arm4regs : 2610 MB/sec
[ 0.085993][ T1] 8regs : 1996 MB/sec
[ 0.090922][ T1] 32regs : 1996 MB/sec
[ 0.095928][ T1] neon : 1964 MB/sec
[ 0.095930][ T1] xor: using function: arm4regs (2610 MB/sec)
[ 0.096211][ T1] bus: 'platform': add driver simple-pm-bus
[ 0.096229][ T1] bus: 'platform': __driver_probe_device: matched device soc with driver simple-pm-bus
[ 0.096234][ T1] bus: 'platform': really_probe: probing driver simple-pm-bus with device soc
[ 0.096244][ T1] simple-pm-bus soc: no pinctrl handle
[ 0.096261][ T1] simple-pm-bus: probe of soc rejects match -19
[ 0.096273][ T1] bus: 'platform': __driver_probe_device: matched device soc:internal-regs with driver simple-pm-bus
[ 0.096277][ T1] bus: 'platform': really_probe: probing driver simple-pm-bus with device soc:internal-regs
[ 0.096284][ T1] simple-pm-bus soc:internal-regs: no pinctrl handle
[ 0.096296][ T1] driver: 'simple-pm-bus': driver_bound: bound to device 'soc:internal-regs'
[ 0.096366][ T1] bus: 'platform': really_probe: bound device soc:internal-regs to driver simple-pm-bus
[ 0.096445][ T1] device class 'phy': registering
[ 0.096461][ T1] bus: 'platform': add driver mvebu-a3700-comphy
[ 0.096505][ T1] bus: 'platform': add driver mvebu-a3700-utmi-phy
[ 0.096759][ T1] bus: 'platform': add driver armada-38x-comphy
[ 0.096776][ T1] bus: 'platform': __driver_probe_device: matched device f1018300.phy with driver armada-38x-comphy
[ 0.096781][ T1] bus: 'platform': really_probe: probing driver armada-38x-comphy with device f1018300.phy
[ 0.096791][ T1] armada-38x-comphy f1018300.phy: no pinctrl handle
[ 0.097002][ T1] phy phy-f1018300.phy.0: Looking up phy-supply from device tree
[ 0.097008][ T1] phy phy-f1018300.phy.0: Looking up phy-supply property in node /soc/internal-regs/phy@18300/phy@0 failed
[ 0.097021][ T1] device: 'phy-f1018300.phy.0': device_add
[ 0.097063][ T1] phy phy-f1018300.phy.1: Looking up phy-supply from device tree
[ 0.097068][ T1] phy phy-f1018300.phy.1: Looking up phy-supply property in node /soc/internal-regs/phy@18300/phy@1 failed
[ 0.097079][ T1] device: 'phy-f1018300.phy.1': device_add
[ 0.097413][ T1] phy phy-f1018300.phy.2: Looking up phy-supply from device tree
[ 0.097418][ T1] phy phy-f1018300.phy.2: Looking up phy-supply property in node /soc/internal-regs/phy@18300/phy@2 failed
[ 0.097426][ T1] device: 'phy-f1018300.phy.2': device_add
[ 0.097466][ T1] phy phy-f1018300.phy.3: Looking up phy-supply from device tree
[ 0.097470][ T1] phy phy-f1018300.phy.3: Looking up phy-supply property in node /soc/internal-regs/phy@18300/phy@3 failed
[ 0.097479][ T1] device: 'phy-f1018300.phy.3': device_add
[ 0.097804][ T1] phy phy-f1018300.phy.4: Looking up phy-supply from device tree
[ 0.097808][ T1] phy phy-f1018300.phy.4: Looking up phy-supply property in node /soc/internal-regs/phy@18300/phy@4 failed
[ 0.097817][ T1] device: 'phy-f1018300.phy.4': device_add
[ 0.097846][ T1] phy phy-f1018300.phy.5: Looking up phy-supply from device tree
[ 0.097850][ T1] phy phy-f1018300.phy.5: Looking up phy-supply property in node /soc/internal-regs/phy@18300/phy@5 failed
[ 0.097858][ T1] device: 'phy-f1018300.phy.5': device_add
[ 0.097886][ T1] driver: 'armada-38x-comphy': driver_bound: bound to device 'f1018300.phy'
[ 0.097917][ T1] bus: 'platform': really_probe: bound device f1018300.phy to driver armada-38x-comphy
[ 0.097962][ T1] bus: 'platform': add driver mvebu-comphy
[ 0.098009][ T1] bus: 'platform': add driver mvebu-cp110-utmi-phy
[ 0.098231][ T1] bus: 'platform': add driver mv-hsic-phy
[ 0.098456][ T1] bus: 'platform': add driver mv-usb2-phy
[ 0.098503][ T1] bus: 'platform': add driver armada-38x-pinctrl
[ 0.098523][ T1] bus: 'platform': __driver_probe_device: matched device f1018000.pinctrl with driver armada-38x-pinctrl
[ 0.098528][ T1] bus: 'platform': really_probe: probing driver armada-38x-pinctrl with device f1018000.pinctrl
[ 0.098538][ T1] armada-38x-pinctrl f1018000.pinctrl: no pinctrl handle
[ 0.100558][ T1] armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver
[ 0.100564][ T1] driver: 'armada-38x-pinctrl': driver_bound: bound to device 'f1018000.pinctrl'
[ 0.100610][ T1] bus: 'platform': really_probe: bound device f1018000.pinctrl to driver armada-38x-pinctrl
[ 0.100676][ T1] bus: 'platform': add driver basic-mmio-gpio
[ 0.100737][ T1] bus: 'platform': add driver mvebu-gpio
[ 0.100764][ T1] bus: 'platform': __driver_probe_device: matched device f1018100.gpio with driver mvebu-gpio
[ 0.100769][ T1] bus: 'platform': really_probe: probing driver mvebu-gpio with device f1018100.gpio
[ 0.101086][ T1] mvebu-gpio f1018100.gpio: no pinctrl handle
[ 0.101273][ T1] device: 'gpiochip0': device_add
[ 0.101286][ T1] bus: 'gpio': add device gpiochip0
[ 0.101580][ T1] driver: 'mvebu-gpio': driver_bound: bound to device 'f1018100.gpio'
[ 0.101608][ T1] bus: 'platform': really_probe: bound device f1018100.gpio to driver mvebu-gpio
[ 0.101618][ T1] bus: 'platform': __driver_probe_device: matched device f1018140.gpio with driver mvebu-gpio
[ 0.101622][ T1] bus: 'platform': really_probe: probing driver mvebu-gpio with device f1018140.gpio
[ 0.101635][ T1] mvebu-gpio f1018140.gpio: no pinctrl handle
[ 0.102321][ T1] device: 'gpiochip1': device_add
[ 0.102333][ T1] bus: 'gpio': add device gpiochip1
[ 0.102424][ T1] driver: 'mvebu-gpio': driver_bound: bound to device 'f1018140.gpio'
[ 0.102456][ T1] bus: 'platform': really_probe: bound device f1018140.gpio to driver mvebu-gpio
[ 0.102717][ T1] bus: 'pci_express': add driver aer
[ 0.102738][ T1] bus: 'pci': add driver pcieport
[ 0.102765][ T1] bus: 'platform': add driver mvebu-pcie
[ 0.102835][ T1] bus: 'platform': __driver_probe_device: matched device soc:pcie with driver mvebu-pcie
[ 0.102839][ T1] bus: 'platform': really_probe: probing driver mvebu-pcie with device soc:pcie
[ 0.103031][ T1] mvebu-pcie soc:pcie: no pinctrl handle
[ 0.103048][ T1] mvebu-pcie soc:pcie: host bridge /soc/pcie ranges:
[ 0.103070][ T1] mvebu-pcie soc:pcie: MEM 0x00f1080000..0x00f1081fff -> 0x0000080000
[ 0.103084][ T1] mvebu-pcie soc:pcie: MEM 0x00f1040000..0x00f1041fff -> 0x0000040000
[ 0.103096][ T1] mvebu-pcie soc:pcie: MEM 0x00f1044000..0x00f1045fff -> 0x0000044000
[ 0.103107][ T1] mvebu-pcie soc:pcie: MEM 0x00f1048000..0x00f1049fff -> 0x0000048000
[ 0.103118][ T1] mvebu-pcie soc:pcie: MEM 0xffffffffffffffff..0x00fffffffe -> 0x0100000000
[ 0.103129][ T1] mvebu-pcie soc:pcie: IO 0xffffffffffffffff..0x00fffffffe -> 0x0100000000
[ 0.103139][ T1] mvebu-pcie soc:pcie: MEM 0xffffffffffffffff..0x00fffffffe -> 0x0200000000
[ 0.103148][ T1] mvebu-pcie soc:pcie: IO 0xffffffffffffffff..0x00fffffffe -> 0x0200000000
[ 0.103158][ T1] mvebu-pcie soc:pcie: MEM 0xffffffffffffffff..0x00fffffffe -> 0x0300000000
[ 0.103168][ T1] mvebu-pcie soc:pcie: IO 0xffffffffffffffff..0x00fffffffe -> 0x0300000000
[ 0.103177][ T1] mvebu-pcie soc:pcie: MEM 0xffffffffffffffff..0x00fffffffe -> 0x0400000000
[ 0.103184][ T1] mvebu-pcie soc:pcie: IO 0xffffffffffffffff..0x00fffffffe -> 0x0400000000
[ 0.103856][ T1] device: 'pci0000:00': device_add
[ 0.103872][ T1] device: '0000:00': device_add
[ 0.104079][ T1] mvebu-pcie soc:pcie: PCI host bridge to bus 0000:00
[ 0.104084][ T1] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.104091][ T1] pci_bus 0000:00: root bus resource [mem 0xf1080000-0xf1081fff] (bus address [0x00080000-0x00081fff])
[ 0.104097][ T1] pci_bus 0000:00: root bus resource [mem 0xf1040000-0xf1041fff] (bus address [0x00040000-0x00041fff])
[ 0.104108][ T1] pci_bus 0000:00: root bus resource [mem 0xf1044000-0xf1045fff] (bus address [0x00044000-0x00045fff])
[ 0.104113][ T1] pci_bus 0000:00: root bus resource [mem 0xf1048000-0xf1049fff] (bus address [0x00048000-0x00049fff])
[ 0.104117][ T1] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
[ 0.104128][ T1] pci_bus 0000:00: root bus resource [io 0x1000-0xeffff]
[ 0.104204][ T1] pci 0000:00:01.0: [11ab:6820] type 01 class 0x060400
[ 0.104257][ T1] device: '0000:00:01.0': device_add
[ 0.104291][ T1] bus: 'pci': add device 0000:00:01.0
[ 0.104705][ T1] pci 0000:00:02.0: [11ab:6820] type 01 class 0x060400
[ 0.104751][ T1] device: '0000:00:02.0': device_add
[ 0.104782][ T1] bus: 'pci': add device 0000:00:02.0
[ 0.105758][ T1] PCI: bus0: Fast back to back transfers disabled
[ 0.105763][ T1] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.105770][ T1] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.105786][ T1] device: '0000:01': device_add
[ 0.106185][ T1] pci 0000:01:00.0: [11ab:2a55] type 00 class 0x020000
[ 0.106202][ T1] pci 0000:01:00.0: reg 0x10: [mem 0x40000000-0x400fffff 64bit pref]
[ 0.106215][ T1] pci 0000:01:00.0: reg 0x18: [mem 0x40100000-0x401fffff 64bit pref]
[ 0.106289][ T1] pci 0000:01:00.0: supports D1 D2
[ 0.106292][ T1] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.106327][ T1] device: '0000:01:00.0': device_add
[ 0.106348][ T1] bus: 'pci': add device 0000:01:00.0
[ 0.106421][ T1] pci 0000:00:01.0: ASPM: current common clock configuration is inconsistent, reconfiguring
[ 0.129129][ T1] PCI: bus1: Fast back to back transfers disabled
[ 0.129135][ T1] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 0.129157][ T1] device: '0000:02': device_add
[ 0.129221][ T1] pci 0000:02:00.0: [11ab:2a55] type 00 class 0x020000
[ 0.129242][ T1] pci 0000:02:00.0: reg 0x10: [mem 0x42000000-0x420fffff 64bit pref]
[ 0.129256][ T1] pci 0000:02:00.0: reg 0x18: [mem 0x42100000-0x421fffff 64bit pref]
[ 0.129357][ T1] pci 0000:02:00.0: supports D1 D2
[ 0.129360][ T1] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.129394][ T1] pci 0000:02:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:02.0 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link)
[ 0.129413][ T1] device: '0000:02:00.0': device_add
[ 0.129434][ T1] bus: 'pci': add device 0000:02:00.0
[ 0.129692][ T1] pci 0000:00:02.0: ASPM: current common clock configuration is inconsistent, reconfiguring
[ 0.159127][ T1] PCI: bus2: Fast back to back transfers disabled
[ 0.159132][ T1] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[ 0.159152][ T1] pci 0000:00:01.0: BAR 8: assigned [mem 0xe0000000-0xe01fffff]
[ 0.159159][ T1] pci 0000:00:02.0: BAR 8: assigned [mem 0xe0200000-0xe03fffff]
[ 0.159166][ T1] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe00fffff 64bit pref]
[ 0.159176][ T1] pci 0000:01:00.0: BAR 2: assigned [mem 0xe0100000-0xe01fffff 64bit pref]
[ 0.159186][ T1] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.159191][ T1] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe01fffff]
[ 0.159202][ T1] pci 0000:02:00.0: BAR 0: assigned [mem 0xe0200000-0xe02fffff 64bit pref]
[ 0.159212][ T1] pci 0000:02:00.0: BAR 2: assigned [mem 0xe0300000-0xe03fffff 64bit pref]
[ 0.159220][ T1] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 0.159225][ T1] pci 0000:00:02.0: bridge window [mem 0xe0200000-0xe03fffff]
[ 0.159245][ T1] bus: 'pci': __driver_probe_device: matched device 0000:00:01.0 with driver pcieport
[ 0.159251][ T1] bus: 'pci': really_probe: probing driver pcieport with device 0000:00:01.0
[ 0.159261][ T1] pcieport 0000:00:01.0: no pinctrl handle
[ 0.159278][ T1] pcieport 0000:00:01.0: enabling device (0140 -> 0142)
[ 0.159291][ T1] pcieport: probe of 0000:00:01.0 rejects match -19
[ 0.159301][ T1] pcieport 0000:00:01.0: devm_attr_group_remove: removing group (ptrval)
[ 0.159313][ T1] bus: 'pci': __driver_probe_device: matched device 0000:00:02.0 with driver pcieport
[ 0.159317][ T1] bus: 'pci': really_probe: probing driver pcieport with device 0000:00:02.0
[ 0.159325][ T1] pcieport 0000:00:02.0: no pinctrl handle
[ 0.159338][ T1] pcieport 0000:00:02.0: enabling device (0140 -> 0142)
[ 0.159348][ T1] pcieport: probe of 0000:00:02.0 rejects match -19
[ 0.159355][ T1] pcieport 0000:00:02.0: devm_attr_group_remove: removing group (ptrval)
[ 0.159373][ T1] driver: 'mvebu-pcie': driver_bound: bound to device 'soc:pcie'
[ 0.159403][ T1] bus: 'platform': really_probe: bound device soc:pcie to driver mvebu-pcie
[ 0.159435][ T1] bus: 'platform': add driver of_fixed_factor_clk
[ 0.159491][ T1] bus: 'platform': add driver of_fixed_clk
[ 0.159530][ T1] bus: 'platform': add driver gpio-clk
[ 0.159577][ T1] bus: 'platform': add driver mv_xor
[ 0.159619][ T1] bus: 'platform': __driver_probe_device: matched device f1060800.xor with driver mv_xor
[ 0.159623][ T1] bus: 'platform': really_probe: probing driver mv_xor with device f1060800.xor
[ 0.159662][ T1] mv_xor f1060800.xor: no pinctrl handle
[ 0.159676][ T1] mv_xor f1060800.xor: Marvell shared XOR driver
[ 0.269928][ T1] mv_xor f1060800.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
[ 0.269951][ T1] device: 'dma0chan0': device_add
[ 0.270023][ T1] driver: 'mv_xor': driver_bound: bound to device 'f1060800.xor'
[ 0.270072][ T1] bus: 'platform': really_probe: bound device f1060800.xor to driver mv_xor
[ 0.270084][ T1] bus: 'platform': __driver_probe_device: matched device f1060900.xor with driver mv_xor
[ 0.270090][ T1] bus: 'platform': really_probe: probing driver mv_xor with device f1060900.xor
[ 0.270101][ T1] mv_xor f1060900.xor: no pinctrl handle
[ 0.270120][ T1] mv_xor f1060900.xor: Marvell shared XOR driver
[ 0.379922][ T1] mv_xor f1060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
[ 0.379943][ T1] device: 'dma1chan0': device_add
[ 0.380008][ T1] driver: 'mv_xor': driver_bound: bound to device 'f1060900.xor'
[ 0.380064][ T1] bus: 'platform': really_probe: bound device f1060900.xor to driver mv_xor
[ 0.380129][ T1] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[ 0.380155][ T1] Registering platform device 'serial8250'. Parent at platform
[ 0.380159][ T1] device: 'serial8250': device_add
[ 0.380166][ T1] bus: 'platform': add device serial8250
[ 0.380211][ T1] device: 'ttyS0': device_add
[ 0.380373][ T1] bus: 'platform': add driver serial8250
[ 0.380620][ T1] bus: 'platform': __driver_probe_device: matched device serial8250 with driver serial8250
[ 0.380627][ T1] bus: 'platform': really_probe: probing driver serial8250 with device serial8250
[ 0.380679][ T1] serial8250 serial8250: no default pinctrl state
[ 0.380692][ T1] driver: 'serial8250': driver_bound: bound to device 'serial8250'
[ 0.380711][ T1] bus: 'platform': really_probe: bound device serial8250 to driver serial8250
[ 0.380899][ T1] bus: 'platform': add driver of_serial
[ 0.380981][ T1] bus: 'platform': __driver_probe_device: matched device f1012000.serial with driver of_serial
[ 0.380986][ T1] bus: 'platform': really_probe: probing driver of_serial with device f1012000.serial
[ 0.381320][ T1] of_serial f1012000.serial: no pinctrl handle
[ 0.381409][ T1] device: 'ttyS0': device_unregister
[ 0.381504][ T1] printk: console [ttyS0] disabled
[ 0.381558][ T1] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 40, base_baud = 12500000) is a 16550A
[ 3.843193][ T1] printk: console [ttyS0] enabled
[ 3.848110][ T1] device: 'ttyS0': device_add
[ 3.852946][ T1] driver: 'of_serial': driver_bound: bound to device 'f1012000.serial'
[ 3.861110][ T1] bus: 'platform': really_probe: bound device f1012000.serial to driver of_serial
[ 3.870394][ T1] device: 'loop-control': device_add
[ 3.876101][ T1] device: 'loop0': device_add
[ 3.881408][ T1] device: '7:0': device_add
[ 3.886008][ T1] loop: module loaded
[ 3.889882][ T1] device class 'scsi_disk': registering
[ 3.895320][ T1] bus: 'scsi': add driver sd
[ 3.899807][ T1] bus: 'platform': add driver ahci-mvebu
[ 3.905364][ T1] bus: 'platform': __driver_probe_device: matched device f10a8000.sata with driver ahci-mvebu
[ 3.915501][ T1] bus: 'platform': really_probe: probing driver ahci-mvebu with device f10a8000.sata
[ 3.924859][ T1] ahci-mvebu f10a8000.sata: no pinctrl handle
[ 3.930844][ T1] ahci-mvebu f10a8000.sata: Looking up ahci-supply from device tree
[ 3.938710][ T1] ahci-mvebu f10a8000.sata: Looking up ahci-supply property in node /soc/internal-regs/sata@a8000 failed
[ 3.949816][ T1] ahci-mvebu f10a8000.sata: supply ahci not found, using dummy regulator
[ 3.958532][ T1] device: 'regulator:regulator.0--platform:f10a8000.sata': device_add
[ 3.966612][ T1] devices_kset: Moving f10a8000.sata to end of list
[ 3.973088][ T1] ahci-mvebu f10a8000.sata: Linked as a consumer to regulator.0
[ 3.980607][ T1] ahci-mvebu f10a8000.sata: Looking up phy-supply from device tree
[ 3.988384][ T1] ahci-mvebu f10a8000.sata: Looking up phy-supply property in node /soc/internal-regs/sata@a8000 failed
[ 3.999396][ T1] ahci-mvebu f10a8000.sata: supply phy not found, using dummy regulator
[ 4.007815][ T1] ahci-mvebu f10a8000.sata: Looking up target-supply from device tree
[ 4.015865][ T1] ahci-mvebu f10a8000.sata: Looking up target-supply property in node /soc/internal-regs/sata@a8000 failed
[ 4.027138][ T1] ahci-mvebu f10a8000.sata: supply target not found, using dummy regulator
[ 4.035712][ T1] ahci-mvebu f10a8000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
[ 4.045504][ T1] ahci-mvebu f10a8000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 4.055241][ T1] device: 'ata1': device_add
[ 4.059723][ T1] device: 'ata1': device_add
[ 4.064606][ T1] device: 'link1': device_add
[ 4.069173][ T1] device: 'link1': device_add
[ 4.073755][ T1] device: 'dev1.0': device_add
[ 4.078397][ T1] device: 'dev1.0': device_add
[ 4.083072][ T1] device: 'ata2': device_add
[ 4.087540][ T1] device: 'ata2': device_add
[ 4.092038][ T1] device: 'link2': device_add
[ 4.096592][ T1] device: 'link2': device_add
[ 4.101531][ T1] device: 'dev2.0': device_add
[ 4.106173][ T1] device: 'dev2.0': device_add
[ 4.111132][ T1] device: 'scsi_tmf_0': device_add
[ 4.116126][ T1] bus: 'workqueue': add device scsi_tmf_0
[ 4.121759][ T1] scsi host0: ahci-mvebu
[ 4.126273][ T1] device: 'host0': device_add
[ 4.130837][ T1] bus: 'scsi': add device host0
[ 4.135576][ T1] device: 'host0': device_add
[ 4.140632][ T1] device: 'scsi_tmf_1': device_add
[ 4.145626][ T1] bus: 'workqueue': add device scsi_tmf_1
[ 4.151255][ T1] scsi host1: ahci-mvebu
[ 4.155593][ T1] device: 'host1': device_add
[ 4.160156][ T1] bus: 'scsi': add device host1
[ 4.164898][ T1] device: 'host1': device_add
[ 4.169510][ T1] ata1: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x100 irq 41
[ 4.178159][ T1] ata2: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x180 irq 41
[ 4.186816][ T1] driver: 'ahci-mvebu': driver_bound: bound to device 'f10a8000.sata'
[ 4.194887][ T1] bus: 'platform': really_probe: bound device f10a8000.sata to driver ahci-mvebu
[ 4.203926][ T1] bus: 'pci': add driver sata_mv
[ 4.208803][ T1] bus: 'platform': add driver sata_mv
[ 4.214133][ T1] device class 'mtd': registering
[ 4.219058][ T1] device: 'mtd-0': device_add
[ 4.224232][ T1] bus: 'platform': add driver marvell-nfc
[ 4.229922][ T1] bus: 'platform': __driver_probe_device: matched device f10d0000.nand-controller with driver marvell-nfc
[ 4.241105][ T1] bus: 'platform': really_probe: probing driver marvell-nfc with device f10d0000.nand-controller
[ 4.251509][ T1] marvell-nfc f10d0000.nand-controller: no pinctrl handle
[ 4.258699][ T1] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xf1
[ 4.265788][ T1] nand: AMD/Spansion S34ML01G2
[ 4.270434][ T1] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 4.278920][ T1] Bad block table found at page 65472, version 0x01
[ 4.285723][ T1] Bad block table found at page 65408, version 0x01
[ 4.292404][ T1] 10 fixed-partitions partitions found on MTD device pxa3xx_nand-0
[ 4.300188][ T1] Creating 10 MTD partitions on "pxa3xx_nand-0":
[ 4.306401][ T1] 0x000000000000-0x000000200000 : "u-boot"
[ 4.312097][ T1] device: 'mtd0': device_add
[ 4.317065][ T1] device: 'mtd0': device_add
[ 4.321550][ T1] bus: 'nvmem': add device mtd0
[ 4.326300][ T1] device: 'mtd0ro': device_add
[ 4.331106][ T1] device: 'mtdblock0': device_add
[ 4.337165][ T1] device: '31:0': device_add
[ 4.341701][ T1] 0x000000200000-0x000000240000 : "u_env"
[ 4.347304][ T1] device: 'mtd1': device_add
[ 4.352253][ T1] device: 'mtd1': device_add
[ 4.356725][ T1] bus: 'nvmem': add device mtd1
[ 4.361479][ T1] device: 'mtd1ro': device_add
[ 4.366447][ T1] device: 'mtdblock1': device_add
[ 4.372130][ T1] device: '31:1': device_add
[ 4.376836][ T1] 0x000000240000-0x000000280000 : "s_env"
[ 4.382449][ T1] device: 'mtd2': device_add
[ 4.387379][ T1] device: 'mtd2': device_add
[ 4.391861][ T1] bus: 'nvmem': add device mtd2
[ 4.396607][ T1] device: 'mtd2ro': device_add
[ 4.401591][ T1] device: 'mtdblock2': device_add
[ 4.407298][ T1] device: '31:2': device_add
[ 4.412037][ T1] 0x000000900000-0x000000a00000 : "devinfo"
[ 4.417815][ T1] device: 'mtd3': device_add
[ 4.422578][ T1] device: 'mtd3': device_add
[ 4.427050][ T1] bus: 'nvmem': add device mtd3
[ 4.432026][ T1] device: 'mtd3ro': device_add
[ 4.437366][ T1] device: 'mtdblock3': device_add
[ 4.442875][ T1] device: '31:3': device_add
[ 4.447594][ T1] 0x000000a00000-0x000003200000 : "kernel1"
[ 4.453441][ T1] device: 'mtd4': device_add
[ 4.458202][ T1] device: 'mtd4': device_add
[ 4.462681][ T1] bus: 'nvmem': add device mtd4
[ 4.467426][ T1] device: 'mtd4ro': device_add
[ 4.472397][ T1] device: 'mtdblock4': device_add
[ 4.478295][ T1] device: '31:4': device_add
[ 4.483039][ T1] 0x000001000000-0x000003200000 : "rootfs1"
[ 4.488865][ T1] device: 'mtd5': device_add
[ 4.493631][ T1] device: 'mtd5': device_add
[ 4.498101][ T1] bus: 'nvmem': add device mtd5
[ 4.503250][ T1] device: 'mtd5ro': device_add
[ 4.508407][ T1] device: 'mtdblock5': device_add
[ 4.513922][ T1] device: '31:5': device_add
[ 4.518647][ T1] 0x000003200000-0x000005a00000 : "kernel2"
[ 4.524491][ T1] device: 'mtd6': device_add
[ 4.525252][ T103] ata1: SATA link down (SStatus 0 SControl 300)
[ 4.529279][ T1] device: 'mtd6': device_add
[ 4.535131][ T108] ata2: SATA link down (SStatus 0 SControl 300)
[ 4.539548][ T1] bus: 'nvmem': add device mtd6
[ 4.550403][ T1] device: 'mtd6ro': device_add
[ 4.555625][ T1] device: 'mtdblock6': device_add
[ 4.561595][ T1] device: '31:6': device_add
[ 4.566316][ T1] 0x000003800000-0x000005a00000 : "rootfs2"
[ 4.572154][ T1] device: 'mtd7': device_add
[ 4.577125][ T1] device: 'mtd7': device_add
[ 4.581606][ T1] bus: 'nvmem': add device mtd7
[ 4.586351][ T1] device: 'mtd7ro': device_add
[ 4.591738][ T1] device: 'mtdblock7': device_add
[ 4.597304][ T1] device: '31:7': device_add
[ 4.602045][ T1] 0x000005a00000-0x000008000000 : "syscfg"
[ 4.607788][ T1] device: 'mtd8': device_add
[ 4.612561][ T1] device: 'mtd8': device_add
[ 4.617036][ T1] bus: 'nvmem': add device mtd8
[ 4.622201][ T1] device: 'mtd8ro': device_add
[ 4.627381][ T1] device: 'mtdblock8': device_add
[ 4.633146][ T1] device: '31:8': device_add
[ 4.637689][ T1] 0x000000280000-0x000000900000 : "unused_area"
[ 4.643834][ T1] device: 'mtd9': device_add
[ 4.648818][ T1] device: 'mtd9': device_add
[ 4.653296][ T1] bus: 'nvmem': add device mtd9
[ 4.658052][ T1] device: 'mtd9ro': device_add
[ 4.663271][ T1] device: 'mtdblock9': device_add
[ 4.669254][ T1] device: '31:9': device_add
[ 4.673988][ T1] driver: 'marvell-nfc': driver_bound: bound to device 'f10d0000.nand-controller'
[ 4.683118][ T1] bus: 'platform': really_probe: bound device f10d0000.nand-controller to driver marvell-nfc
[ 4.693210][ T1] bus: 'spi': add driver spi-nand
[ 4.698126][ T1] bus: 'spi': add driver spi-nor
[ 4.702961][ T1] bus: 'platform': add driver orion_spi
[ 4.708505][ T1] bus: 'platform': add driver am335x-control-usb
[ 4.714756][ T1] bus: 'platform': add driver am335x-phy-driver
[ 4.720916][ T1] bus: 'platform': add driver gpio-vbus
[ 4.726360][ T1] bus: 'i2c': add driver isp1301
[ 4.731201][ T1] bus: 'pci': add driver ehci-pci
[ 4.736131][ T1] bus: 'platform': add driver orion-ehci
[ 4.741679][ T1] bus: 'platform': __driver_probe_device: matched device f1058000.usb with driver orion-ehci
[ 4.751732][ T1] bus: 'platform': really_probe: probing driver orion-ehci with device f1058000.usb
[ 4.761003][ T1] orion-ehci f1058000.usb: no pinctrl handle
[ 4.766936][ T1] orion-ehci f1058000.usb: EHCI Host Controller
[ 4.773307][ T1] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1
[ 4.781669][ T1] orion-ehci f1058000.usb: irq 43, io mem 0xf1058000
[ 4.809111][ T1] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00
[ 4.816124][ T1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[ 4.825134][ T1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.833089][ T1] usb usb1: Product: EHCI Host Controller
[ 4.838685][ T1] usb usb1: Manufacturer: Linux 6.1.0-rc3M95D-test ehci_hcd
[ 4.845854][ T1] usb usb1: SerialNumber: f1058000.usb
[ 4.851195][ T1] device: 'usb1': device_add
[ 4.855706][ T1] bus: 'usb': add device usb1
[ 4.860400][ T1] bus: 'usb': __driver_probe_device: matched device usb1 with driver usb
[ 4.868701][ T1] bus: 'usb': really_probe: probing driver usb with device usb1
[ 4.876253][ T1] device: '1-0:1.0': device_add
[ 4.880998][ T1] bus: 'usb': add device 1-0:1.0
[ 4.885835][ T1] bus: 'usb': __driver_probe_device: matched device 1-0:1.0 with driver hub
[ 4.894401][ T1] bus: 'usb': really_probe: probing driver hub with device 1-0:1.0
[ 4.902248][ T1] hub 1-0:1.0: USB hub found
[ 4.907156][ T1] hub 1-0:1.0: 1 port detected
[ 4.912435][ T1] device: 'usb1-port1': device_add
[ 4.917435][ T1] usb usb1-port1: adding component (ops connector_ops)
[ 4.924198][ T1] driver: 'hub': driver_bound: bound to device '1-0:1.0'
[ 4.931136][ T1] bus: 'usb': really_probe: bound device 1-0:1.0 to driver hub
[ 4.938568][ T1] device: 'ep_81': device_add
[ 4.943139][ T1] driver: 'usb': driver_bound: bound to device 'usb1'
[ 4.949810][ T1] bus: 'usb': really_probe: bound device usb1 to driver usb
[ 4.956980][ T1] device: 'ep_00': device_add
[ 4.961547][ T1] driver: 'orion-ehci': driver_bound: bound to device 'f1058000.usb'
[ 4.969523][ T1] bus: 'platform': really_probe: bound device f1058000.usb to driver orion-ehci
[ 4.978721][ T1] bus: 'pci': add driver xhci_hcd
[ 4.983656][ T1] bus: 'platform': add driver xhci-hcd
[ 4.989129][ T1] bus: 'platform': __driver_probe_device: matched device f10f8000.usb3 with driver xhci-hcd
[ 4.999086][ T1] bus: 'platform': really_probe: probing driver xhci-hcd with device f10f8000.usb3
[ 5.008268][ T1] xhci-hcd f10f8000.usb3: no pinctrl handle
[ 5.014588][ T1] xhci-hcd f10f8000.usb3: Driver xhci-hcd requests probe deferral
[ 5.022336][ T1] platform f10f8000.usb3: Added to deferred list
[ 5.028583][ T1] bus: 'usb': add driver usb-storage
[ 5.033785][ T1] usbcore: registered new interface driver usb-storage
[ 5.040552][ T1] bus: 'usb-serial': registered
[ 5.045530][ T1] bus: 'usb': add driver ftdi_sio
[ 5.050458][ T1] usbcore: registered new interface driver ftdi_sio
[ 5.056927][ T1] bus: 'usb-serial': add driver ftdi_sio
[ 5.062454][ T1] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 5.070519][ T1] bus: 'i2c': add driver usb3503
[ 5.075351][ T1] bus: 'platform': add driver usb3503
[ 5.080664][ T1] bus: 'platform': add driver onboard-usb-hub
[ 5.086688][ T1] bus: 'usb': add driver onboard-usb-hub
[ 5.092217][ T1] usbcore: registered new device driver onboard-usb-hub
[ 5.099068][ T1] bus: 'platform': add driver snps-udc-plat
[ 5.104908][ T1] bus: 'platform': add driver bdc
[ 5.110345][ T1] bus: 'i2c': add driver stusb160x
[ 5.115349][ T1] i2c_dev: i2c /dev entries driver
[ 5.120340][ T1] device class 'i2c-dev': registering
[ 5.125604][ T1] bus: 'platform': add driver mv64xxx_i2c
[ 5.131230][ T1] bus: 'platform': __driver_probe_device: matched device f1011000.i2c with driver mv64xxx_i2c
[ 5.141368][ T1] bus: 'platform': really_probe: probing driver mv64xxx_i2c with device f1011000.i2c
[ 5.150990][ T1] mv64xxx_i2c f1011000.i2c: no init pinctrl state
[ 5.157653][ T1] device: 'i2c-0': device_add
[ 5.162224][ T1] bus: 'i2c': add device i2c-0
[ 5.166869][ T1] device: 'i2c-0': device_add
[ 5.171831][ T1] device: '0-004c': device_add
[ 5.176482][ T1] bus: 'i2c': add device 0-004c
[ 5.181251][ T1] device: '0-0068': device_add
[ 5.185898][ T1] bus: 'i2c': add device 0-0068
[ 5.190668][ T1] driver: 'mv64xxx_i2c': driver_bound: bound to device 'f1011000.i2c'
[ 5.198731][ T1] bus: 'platform': really_probe: bound device f1011000.i2c to driver mv64xxx_i2c
[ 5.207813][ T1] bus: 'i2c': add driver tmp421
[ 5.212549][ T1] bus: 'i2c': __driver_probe_device: matched device 0-004c with driver tmp421
[ 5.221290][ T1] bus: 'i2c': really_probe: probing driver tmp421 with device 0-004c
[ 5.229253][ T1] tmp421 0-004c: no pinctrl handle
[ 5.235424][ T1] device: 'hwmon0': device_add
[ 5.240633][ T1] driver: 'tmp421': driver_bound: bound to device '0-004c'
[ 5.247736][ T1] bus: 'i2c': really_probe: bound device 0-004c to driver tmp421
[ 5.255373][ T1] bus: 'platform': add driver armada_thermal
[ 5.261322][ T1] bus: 'platform': __driver_probe_device: matched device f10e4078.thermal with driver armada_thermal
[ 5.272069][ T1] bus: 'platform': really_probe: probing driver armada_thermal with device f10e4078.thermal
[ 5.282290][ T1] armada_thermal f10e4078.thermal: no pinctrl handle
[ 5.289912][ T1] device: 'thermal_zone0': device_add
[ 5.295203][ T1] device: 'hwmon1': device_add
[ 5.299879][ T1] driver: 'armada_thermal': driver_bound: bound to device 'f10e4078.thermal'
[ 5.308555][ T1] bus: 'platform': really_probe: bound device f10e4078.thermal to driver armada_thermal
[ 5.318205][ T1] bus: 'platform': add driver orion_wdt
[ 5.323675][ T1] bus: 'platform': __driver_probe_device: matched device f1020300.watchdog with driver orion_wdt
[ 5.334071][ T1] bus: 'platform': really_probe: probing driver orion_wdt with device f1020300.watchdog
[ 5.343688][ T1] orion_wdt f1020300.watchdog: no pinctrl handle
[ 5.350814][ T1] device: 'watchdog': device_add
[ 5.355698][ T1] device: 'watchdog0': device_add
[ 5.360656][ T1] orion_wdt: Initial timeout 171 sec
[ 5.365818][ T1] driver: 'orion_wdt': driver_bound: bound to device 'f1020300.watchdog'
[ 5.374149][ T1] bus: 'platform': really_probe: bound device f1020300.watchdog to driver orion_wdt
[ 5.383483][ T1] bus: 'platform': add driver leds-gpio
[ 5.388935][ T1] bus: 'platform': __driver_probe_device: matched device gpio-leds with driver leds-gpio
[ 5.398637][ T1] bus: 'platform': really_probe: probing driver leds-gpio with device gpio-leds
[ 5.407590][ T1] leds-gpio gpio-leds: no init pinctrl state
[ 5.413513][ T1] device: 'cobra:white:power': device_add
[ 5.419682][ T1] device: 'cobra:white:sata': device_add
[ 5.425221][ T1] driver: 'leds-gpio': driver_bound: bound to device 'gpio-leds'
[ 5.432837][ T1] leds-gpio gpio-leds: Dropping the link to f1018140.gpio
[ 5.439833][ T1] device: 'platform:f1018140.gpio--platform:gpio-leds': device_unregister
[ 5.448276][ T1] bus: 'platform': really_probe: bound device gpio-leds to driver leds-gpio
[ 5.456859][ T1] bus: 'i2c': add driver leds-pca963x
[ 5.462129][ T1] bus: 'i2c': __driver_probe_device: matched device 0-0068 with driver leds-pca963x
[ 5.471397][ T1] bus: 'i2c': really_probe: probing driver leds-pca963x with device 0-0068
[ 5.480310][ T1] leds-pca963x 0-0068: no pinctrl handle
[ 5.488290][ T1] device: 'pca963x:cobra:amber:wan': device_add
[ 5.494462][ T1] device: 'pca963x:cobra:white:wan': device_add
[ 5.500660][ T1] device: 'pca963x:cobra:white:wlan_2g': device_add
[ 5.507156][ T1] device: 'pca963x:cobra:white:wlan_5g': device_add
[ 5.514172][ T1] device: 'pca963x:cobra:white:usb2': device_add
[ 5.520420][ T1] device: 'pca963x:cobra:white:usb3_1': device_add
[ 5.527080][ T1] device: 'pca963x:cobra:white:usb3_2': device_add
[ 5.533501][ T1] device: 'pca963x:cobra:white:wps': device_add
[ 5.539656][ T1] device: 'pca963x:cobra:amber:wps': device_add
[ 5.545800][ T1] driver: 'leds-pca963x': driver_bound: bound to device '0-0068'
[ 5.553439][ T1] bus: 'i2c': really_probe: bound device 0-0068 to driver leds-pca963x
[ 5.561666][ T1] ledtrig-cpu: registered to indicate activity on CPUs
[ 5.568409][ T1] bus: 'platform': add driver marvell-cesa
[ 5.574197][ T1] bus: 'platform': __driver_probe_device: matched device f1090000.crypto with driver marvell-cesa
[ 5.584683][ T1] bus: 'platform': really_probe: probing driver marvell-cesa with device f1090000.crypto
[ 5.594388][ T1] marvell-cesa f1090000.crypto: no pinctrl handle
[ 5.601560][ T1] marvell-cesa f1090000.crypto: CESA device successfully registered
[ 5.609438][ T1] driver: 'marvell-cesa': driver_bound: bound to device 'f1090000.crypto'
[ 5.617852][ T1] bus: 'platform': really_probe: bound device f1090000.crypto to driver marvell-cesa
[ 5.627254][ T1] device class 'extcon': registering
[ 5.632442][ T1] bus: 'platform': add driver mvebu-devbus
[ 5.638188][ T1] bus: 'platform': add driver rmem
[ 5.643477][ T1] bus: 'platform': add driver u_boot_env
[ 5.649081][ T1] Registering SWP/SWPB emulation handler
[ 5.657890][ T1] device: 'btrfs-control': device_add
[ 5.663258][ T1] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[ 5.680192][ T28] devices_kset: Moving usb3_1-vbus to end of list
[ 5.686499][ T28] devices_kset: Moving usb3_1-phy to end of list
[ 5.692753][ T28] platform usb3_1-vbus: Retrying from deferred list
[ 5.699240][ T28] bus: 'platform': __driver_probe_device: matched device usb3_1-vbus with driver reg-fixed-voltage
[ 5.709821][ T28] bus: 'platform': really_probe: probing driver reg-fixed-voltage with device usb3_1-vbus
[ 5.719639][ T28] reg-fixed-voltage usb3_1-vbus: no init pinctrl state
[ 5.726500][ T28] usb3_1-vbus: 5000 mV, disabled
[ 5.731326][ T28] device: 'regulator.1': device_add
[ 5.736468][ T28] reg-fixed-voltage usb3_1-vbus: usb3_1-vbus supplying 5000000uV
[ 5.744078][ T28] driver: 'reg-fixed-voltage': driver_bound: bound to device 'usb3_1-vbus'
[ 5.752584][ T28] bus: 'platform': really_probe: bound device usb3_1-vbus to driver reg-fixed-voltage
[ 5.762025][ T28] devices_kset: Moving usb3_1-phy to end of list
[ 5.768233][ T28] platform usb3_1-phy: Retrying from deferred list
[ 5.774623][ T28] bus: 'platform': __driver_probe_device: matched device usb3_1-phy with driver usb_phy_generic
[ 5.784932][ T28] bus: 'platform': really_probe: probing driver usb_phy_generic with device usb3_1-phy
[ 5.794464][ T28] usb_phy_generic usb3_1-phy: no pinctrl handle
[ 5.800620][ T28] usb_phy_generic usb3_1-phy: Looking up vcc-supply from device tree
[ 5.808597][ T28] device: 'regulator:regulator.1--platform:usb3_1-phy': device_add
[ 5.816410][ T28] devices_kset: Moving usb3_1-phy to end of list
[ 5.822622][ T28] usb_phy_generic usb3_1-phy: Linked as a consumer to regulator.1
[ 5.830315][ T28] usb_phy_generic usb3_1-phy: Looking up vbus-supply from device tree
[ 5.838352][ T28] usb_phy_generic usb3_1-phy: Looking up vbus-supply property in node /usb3_1-phy failed
[ 5.848053][ T28] usb_phy_generic usb3_1-phy: dummy supplies not allowed for exclusive requests
[ 5.856970][ T28] driver: 'usb_phy_generic': driver_bound: bound to device 'usb3_1-phy'
[ 5.865206][ T28] bus: 'platform': really_probe: bound device usb3_1-phy to driver usb_phy_generic
[ 5.874383][ T28] devices_kset: Moving f10f8000.usb3 to end of list
[ 5.880855][ T28] platform f10f8000.usb3: Retrying from deferred list
[ 5.887548][ T28] bus: 'platform': __driver_probe_device: matched device f10f8000.usb3 with driver xhci-hcd
[ 5.897508][ T28] bus: 'platform': really_probe: probing driver xhci-hcd with device f10f8000.usb3
[ 5.906689][ T28] xhci-hcd f10f8000.usb3: no pinctrl handle
[ 5.912539][ T28] xhci-hcd f10f8000.usb3: xHCI Host Controller
[ 5.918584][ T28] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 2
[ 5.927538][ T28] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000010010
[ 5.937542][ T28] xhci-hcd f10f8000.usb3: irq 44, io mem 0xf10f8000
[ 5.944630][ T28] xhci-hcd f10f8000.usb3: xHCI Host Controller
[ 5.950675][ T28] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 3
[ 5.958901][ T28] xhci-hcd f10f8000.usb3: Host supports USB 3.0 SuperSpeed
[ 5.966068][ T28] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[ 5.975083][ T28] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.983038][ T28] usb usb2: Product: xHCI Host Controller
[ 5.988634][ T28] usb usb2: Manufacturer: Linux 6.1.0-rc3M95D-test xhci-hcd
[ 5.995802][ T28] usb usb2: SerialNumber: f10f8000.usb3
[ 6.001231][ T28] device: 'usb2': device_add
[ 6.005960][ T28] bus: 'usb': add device usb2
[ 6.010621][ T28] bus: 'usb': __driver_probe_device: matched device usb2 with driver usb
[ 6.018923][ T28] bus: 'usb': really_probe: probing driver usb with device usb2
[ 6.026471][ T28] device: '2-0:1.0': device_add
[ 6.031223][ T28] bus: 'usb': add device 2-0:1.0
[ 6.036059][ T28] bus: 'usb': __driver_probe_device: matched device 2-0:1.0 with driver hub
[ 6.044626][ T28] bus: 'usb': really_probe: probing driver hub with device 2-0:1.0
[ 6.052411][ T28] hub 2-0:1.0: USB hub found
[ 6.056887][ T28] hub 2-0:1.0: 1 port detected
[ 6.061552][ T28] device: 'usb2-port1': device_add
[ 6.066550][ T28] usb usb2-port1: adding component (ops connector_ops)
[ 6.073306][ T28] driver: 'hub': driver_bound: bound to device '2-0:1.0'
[ 6.080234][ T28] bus: 'usb': really_probe: bound device 2-0:1.0 to driver hub
[ 6.087669][ T28] device: 'ep_81': device_add
[ 6.092242][ T28] driver: 'usb': driver_bound: bound to device 'usb2'
[ 6.098903][ T28] bus: 'usb': really_probe: bound device usb2 to driver usb
[ 6.106080][ T28] device: 'ep_00': device_add
[ 6.111646][ T28] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[ 6.120982][ T28] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
[ 6.129986][ T28] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.137937][ T28] usb usb3: Product: xHCI Host Controller
[ 6.143535][ T28] usb usb3: Manufacturer: Linux 6.1.0-rc3M95D-test xhci-hcd
[ 6.150709][ T28] usb usb3: SerialNumber: f10f8000.usb3
[ 6.156134][ T28] device: 'usb3': device_add
[ 6.160641][ T28] bus: 'usb': add device usb3
[ 6.165739][ T28] bus: 'usb': __driver_probe_device: matched device usb3 with driver usb
[ 6.174050][ T28] bus: 'usb': really_probe: probing driver usb with device usb3
[ 6.181594][ T28] device: '3-0:1.0': device_add
[ 6.186335][ T28] bus: 'usb': add device 3-0:1.0
[ 6.191175][ T28] bus: 'usb': __driver_probe_device: matched device 3-0:1.0 with driver hub
[ 6.199741][ T28] bus: 'usb': really_probe: probing driver hub with device 3-0:1.0
[ 6.207525][ T28] hub 3-0:1.0: USB hub found
[ 6.212009][ T28] hub 3-0:1.0: 1 port detected
[ 6.216669][ T28] device: 'usb3-port1': device_add
[ 6.222156][ T28] usb usb3-port1: adding component (ops connector_ops)
[ 6.228913][ T28] driver: 'hub': driver_bound: bound to device '3-0:1.0'
[ 6.235847][ T28] bus: 'usb': really_probe: bound device 3-0:1.0 to driver hub
[ 6.243283][ T28] device: 'ep_81': device_add
[ 6.247847][ T28] driver: 'usb': driver_bound: bound to device 'usb3'
[ 6.254512][ T28] bus: 'usb': really_probe: bound device usb3 to driver usb
[ 6.261685][ T28] device: 'ep_00': device_add
[ 6.266742][ T28] driver: 'xhci-hcd': driver_bound: bound to device 'f10f8000.usb3'
[ 6.274637][ T28] bus: 'platform': really_probe: bound device f10f8000.usb3 to driver xhci-hcd
[ 6.283484][ T1] device class 'ubi': registering
[ 6.288404][ T1] device: 'ubi_ctrl': device_add
[ 6.293777][ T1] Waiting 60 sec before mounting root device...
[ 17.079104][ T108] ata2: COMRESET failed (errno=-32)
[ 17.084180][ T108] ata2: reset failed (errno=-32), retrying in 8 secs
[ 25.689107][ T108] ata2: SATA link down (SStatus 100 SControl 300)
[ 26.559106][ T108] ata2: SATA link down (SStatus 0 SControl 300)
[ 28.969104][ T108] ata2: COMRESET failed (errno=-32)
[ 28.974176][ T108] ata2: reset failed (errno=-32), retrying in 8 secs
[ 39.249104][ T108] ata2: COMRESET failed (errno=-32)
[ 39.254176][ T108] ata2: reset failed (errno=-32), retrying in 8 secs
[ 49.599104][ T108] ata2: COMRESET failed (errno=-32)
[ 49.604176][ T108] ata2: reset failed (errno=-32), retrying in 33 secs
[ 69.609147][ T1] /dev/root: Can't open blockdev
[ 69.613962][ T1] VFS: Cannot open root device "sda" or unknown-block(0,0): error -6
[ 69.621922][ T1] Please append a correct "root=" boot option; here are the available partitions:
[ 69.631012][ T1] 1f00 2048 mtdblock0
[ 69.631017][ T1] (driver?)
[ 69.638979][ T1] 1f01 256 mtdblock1
[ 69.638982][ T1] (driver?)
[ 69.646945][ T1] 1f02 256 mtdblock2
[ 69.646947][ T1] (driver?)
[ 69.654910][ T1] 1f03 1024 mtdblock3
[ 69.654913][ T1] (driver?)
[ 69.662876][ T1] 1f04 40960 mtdblock4
[ 69.662878][ T1] (driver?)
[ 69.670845][ T1] 1f05 34816 mtdblock5
[ 69.670848][ T1] (driver?)
[ 69.678808][ T1] 1f06 40960 mtdblock6
[ 69.678811][ T1] (driver?)
[ 69.686774][ T1] 1f07 34816 mtdblock7
[ 69.686777][ T1] (driver?)
[ 69.694740][ T1] 1f08 38912 mtdblock8
[ 69.694743][ T1] (driver?)
[ 69.702706][ T1] 1f09 6656 mtdblock9
[ 69.702708][ T1] (driver?)
[ 69.710671][ T1] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
[ 69.719668][ T1] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.1.0-rc3M95D-test #1
[ 69.727359][ T1] Hardware name: Marvell Armada 380/385 (Device Tree)
[ 69.734004][ T1] unwind_backtrace from show_stack+0x10/0x14
[ 69.739957][ T1] show_stack from dump_stack_lvl+0x40/0x4c
[ 69.745732][ T1] dump_stack_lvl from panic+0xf4/0x2ec
[ 69.751159][ T1] panic from mount_block_root+0x194/0x22c
[ 69.756850][ T1] mount_block_root from prepare_namespace+0x144/0x180
[ 69.763588][ T1] prepare_namespace from kernel_init+0x18/0x12c
[ 69.769800][ T1] kernel_init from ret_from_fork+0x14/0x1c
[ 69.775572][ T1] Exception stack(0xc1033fb0 to 0xc1033ff8)
[ 69.781343][ T1] 3fa0: 00000000 00000000 00000000 00000000
[ 69.790254][ T1] 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 69.799163][ T1] 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000
[ 69.806502][ C1] CPU1: stopping
[ 69.809918][ C1] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.1.0-rc3M95D-test #1
[ 69.817609][ C1] Hardware name: Marvell Armada 380/385 (Device Tree)
[ 69.824251][ C1] unwind_backtrace from show_stack+0x10/0x14
[ 69.830200][ C1] show_stack from dump_stack_lvl+0x40/0x4c
[ 69.835973][ C1] dump_stack_lvl from do_handle_IPI+0xf0/0x124
[ 69.842095][ C1] do_handle_IPI from ipi_handler+0x18/0x20
[ 69.847866][ C1] ipi_handler from handle_percpu_devid_irq+0x78/0x134
[ 69.854598][ C1] handle_percpu_devid_irq from generic_handle_domain_irq+0x28/0x38
[ 69.862466][ C1] generic_handle_domain_irq from gic_handle_irq+0x74/0x88
[ 69.869552][ C1] gic_handle_irq from generic_handle_arch_irq+0x34/0x44
[ 69.876460][ C1] generic_handle_arch_irq from call_with_stack+0x18/0x20
[ 69.883457][ C1] call_with_stack from __irq_svc+0x6c/0x7c
[ 69.889230][ C1] Exception stack(0xc1049f68 to 0xc1049fb0)
[ 69.895001][ C1] 9f60: 00000005 00000000 0001d2a1 c0111080 c0a04e8c c1029540
[ 69.903911][ C1] 9f80: 00000001 c0a04ed4 0000406a 414fc091 00000000 00000000 c1027578 c1049fb8
[ 69.912821][ C1] 9fa0: c0107994 c0107998 60000013 ffffffff
[ 69.918589][ C1] __irq_svc from arch_cpu_idle+0x38/0x3c
[ 69.924191][ C1] arch_cpu_idle from default_idle_call+0x24/0x34
[ 69.930492][ C1] default_idle_call from do_idle+0x90/0x104
[ 69.936356][ C1] do_idle from cpu_startup_entry+0x18/0x1c
[ 69.942129][ C1] cpu_startup_entry from secondary_start_kernel+0x120/0x138
[ 69.949385][ C1] secondary_start_kernel from 0x1013b4
[ 69.954813][ T1] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) ]---
˜HI@IIH\0\x02\x10\0 \0\0\0\0\0\0\0\0\0\0
next prev parent reply other threads:[~2022-11-07 9:23 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-01 19:21 Bug report for ahci-mvebu driver Dinu Marius
2022-11-06 7:05 ` Damien Le Moal
2022-11-07 9:22 ` marius [this message]
2022-11-08 6:27 ` Damien Le Moal
2022-11-09 19:52 ` marius
2022-11-09 19:55 ` marius
2022-11-10 2:05 ` Damien Le Moal
2022-11-11 22:32 ` marius
2022-11-12 1:57 ` Damien Le Moal
2022-11-14 20:52 ` marius
2022-11-15 3:02 ` Damien Le Moal
2022-11-15 7:28 ` marius
2022-11-15 8:10 ` Damien Le Moal
2022-11-18 18:24 ` Dinu Marius
2022-11-24 2:40 ` Damien Le Moal
2022-12-04 1:41 ` marius
2022-12-04 10:22 ` Pali Rohár
2022-12-04 21:14 ` marius
2022-12-04 21:46 ` Pali Rohár
2022-12-05 2:02 ` Damien Le Moal
2022-12-06 6:08 ` Damien Le Moal
2022-12-08 21:26 ` Pali Rohár
2022-12-09 1:54 ` Damien Le Moal
2022-12-07 18:27 ` marius
2022-12-07 21:54 ` Damien Le Moal
2022-12-07 22:51 ` Damien Le Moal
2022-12-08 18:06 ` marius
2022-12-09 0:34 ` Damien Le Moal
2022-12-09 2:58 ` Damien Le Moal
2022-12-09 7:31 ` marius
2022-12-09 9:28 ` Damien Le Moal
2022-12-09 18:30 ` marius
2023-01-14 18:01 ` marius
2023-01-15 23:37 ` Damien Le Moal
2023-01-17 8:26 ` Damien Le Moal
2023-01-18 19:43 ` marius
2023-01-19 0:29 ` Damien Le Moal
2023-01-19 18:46 ` marius
2023-01-23 7:02 ` Damien Le Moal
2023-01-23 20:00 ` marius
2023-01-23 23:00 ` Damien Le Moal
2023-01-24 8:04 ` marius
2023-01-24 9:53 ` Damien Le Moal
2023-01-24 17:02 ` marius
2023-01-27 5:13 ` Damien Le Moal
2023-01-27 6:28 ` Damien Le Moal
2023-01-28 17:08 ` marius
2023-01-29 2:23 ` Damien Le Moal
2023-01-29 10:24 ` marius
2023-01-30 1:16 ` Damien Le Moal
2023-01-30 2:38 ` Damien Le Moal
2023-01-30 7:23 ` marius
2023-01-30 7:37 ` Damien Le Moal
2023-01-30 23:22 ` Damien Le Moal
2023-01-31 7:20 ` marius
2023-01-31 7:28 ` Damien Le Moal
2023-02-07 18:40 ` marius
2023-02-07 23:39 ` Damien Le Moal
2023-02-08 12:17 ` marius
2023-02-08 23:00 ` Damien Le Moal
2023-02-12 13:14 ` marius
2023-02-12 23:11 ` Damien Le Moal
2023-01-24 17:06 ` Bug report for sata_via driver marius
2023-01-25 1:26 ` Damien Le Moal
2022-11-26 14:26 ` Bug report for ahci-mvebu driver Pali Rohár
2023-01-23 9:10 ` Hajo Noerenberg
2023-01-23 12:13 ` Damien Le Moal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3c94c10243fa1cd2b0128db846298a11@psihoexpert.ro \
--to=marius@psihoexpert.ro \
--cc=damien.lemoal@opensource.wdc.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.