From: marius@psihoexpert.ro
To: "Damien Le Moal" <damien.lemoal@opensource.wdc.com>
Cc: linux-ide@vger.kernel.org
Subject: Re: Bug report for ahci-mvebu driver
Date: Thu, 08 Dec 2022 18:06:58 +0000 [thread overview]
Message-ID: <77b389a080646567b9f9d44caa42d547@psihoexpert.ro> (raw)
In-Reply-To: <f030af47-8522-cdef-8394-84f020c6ddca@opensource.wdc.com>
December 8, 2022 12:51 AM, "Damien Le Moal" <damien.lemoal@opensource.wdc.com> wrote:
> By the way, did you also try a cold boot ? Switching off your router,
> connect the pmp box, turn on the router ? Does it change anything ?
> ATA hot-plugging tends to have more problems, so worth trying. The
> ahci_mvebu driver errata is for hot-plug, so this newer SoC may have
> different issues with that too.
Yes. No change. Same errors.
> Can you try with no patches and no revert adding the following options to
> your kernel command line ?
>
> libata.force=2:3Gbps
No change. Same errors.
> libata.force=2:1.5Gbps
This one works, without any error at the beginning, unlike the way reverted commit worked.
[ 33.635191][ T112] hardreset, Online=>Offline
[ 33.636272][ T112] resume, do loop
[ 33.862817][ T112] resume, after do loop
[ 33.922816][ T112] debounce, SCR=0x113
[ 33.982816][ T112] debounce, SCR=0x113
[ 34.042816][ T112] debounce, SCR=0x113
[ 34.102815][ T112] debounce, SCR=0x113
[ 34.162816][ T112] debounce, SCR=0x113
[ 34.222816][ T112] debounce, SCR=0x113
[ 34.282815][ T112] debounce, SCR=0x113
[ 34.342815][ T112] debounce, SCR=0x113
[ 34.402815][ T112] debounce, SCR=0x113
[ 34.406673][ T112] resume, return at end of function
[ 34.410531][ T112] hardreset, Offline=>Online
[ 34.420090][ T112] hardreset, sata_pmp_supported, before check_ready
[ 34.592820][ T112] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 34.606547][ T112] ata2.15: Port Multiplier 1.2, 0x197b:0x0325 r193, 8 ports, feat 0xf/0x1f
[ 34.615196][ T112] device: 'link2.0': device_add
[ 34.620015][ T112] device: 'link2.0': device_add
[ 34.625514][ T112] device: 'dev2.0.0': device_add
[ 34.630365][ T112] device: 'dev2.0.0': device_add
[ 34.635780][ T112] device: 'link2.1': device_add
[ 34.640545][ T112] device: 'link2.1': device_add
[ 34.646038][ T112] device: 'dev2.1.0': device_add
[ 34.650892][ T112] device: 'dev2.1.0': device_add
[ 34.656245][ T112] device: 'link2.2': device_add
[ 34.661009][ T112] device: 'link2.2': device_add
[ 34.666209][ T112] device: 'dev2.2.0': device_add
[ 34.671063][ T112] device: 'dev2.2.0': device_add
[ 34.676631][ T112] device: 'link2.3': device_add
[ 34.681400][ T112] device: 'link2.3': device_add
[ 34.686289][ T112] device: 'dev2.3.0': device_add
[ 34.691429][ T112] device: 'dev2.3.0': device_add
[ 34.696441][ T112] device: 'link2.4': device_add
[ 34.701206][ T112] device: 'link2.4': device_add
[ 34.706700][ T112] device: 'dev2.4.0': device_add
[ 34.711554][ T112] device: 'dev2.4.0': device_add
[ 34.716867][ T112] device: 'link2.5': device_add
[ 34.721634][ T112] device: 'link2.5': device_add
[ 34.726850][ T112] device: 'dev2.5.0': device_add
[ 34.731704][ T112] device: 'dev2.5.0': device_add
[ 34.737502][ T112] device: 'link2.6': device_add
[ 34.742271][ T112] device: 'link2.6': device_add
[ 34.747160][ T112] device: 'dev2.6.0': device_add
[ 34.752013][ T112] device: 'dev2.6.0': device_add
[ 34.757613][ T112] device: 'link2.7': device_add
[ 34.762387][ T112] device: 'link2.7': device_add
[ 34.767307][ T112] device: 'dev2.7.0': device_add
[ 34.772733][ T112] device: 'dev2.7.0': device_add
[ 34.777760][ T112] device: 'link2.8': device_add
[ 34.782531][ T112] device: 'link2.8': device_add
[ 34.787757][ T112] device: 'dev2.8.0': device_add
[ 34.792616][ T112] device: 'dev2.8.0': device_add
[ 34.797950][ T112] device: 'link2.9': device_add
[ 34.802722][ T112] device: 'link2.9': device_add
[ 34.807959][ T112] device: 'dev2.9.0': device_add
[ 34.812836][ T112] device: 'dev2.9.0': device_add
[ 34.818405][ T112] device: 'link2.10': device_add
[ 34.823282][ T112] device: 'link2.10': device_add
[ 34.828837][ T112] device: 'dev2.10.0': device_add
[ 34.833811][ T112] device: 'dev2.10.0': device_add
[ 34.839470][ T112] device: 'link2.11': device_add
[ 34.844348][ T112] device: 'link2.11': device_add
[ 34.849349][ T112] device: 'dev2.11.0': device_add
[ 34.854309][ T112] device: 'dev2.11.0': device_add
[ 34.859989][ T112] device: 'link2.12': device_add
[ 34.864870][ T112] device: 'link2.12': device_add
[ 34.869875][ T112] device: 'dev2.12.0': device_add
[ 34.875187][ T112] device: 'dev2.12.0': device_add
[ 34.880283][ T112] device: 'link2.13': device_add
[ 34.885162][ T112] device: 'link2.13': device_add
[ 34.890768][ T112] device: 'dev2.13.0': device_add
[ 34.895744][ T112] device: 'dev2.13.0': device_add
[ 34.901156][ T112] device: 'link2.14': device_add
[ 34.906038][ T112] device: 'link2.14': device_add
[ 34.911351][ T112] device: 'dev2.14.0': device_add
[ 34.916318][ T112] device: 'dev2.14.0': device_add
[ 34.922247][ T112] ahci-mvebu f10a8000.sata: FBS is enabled
[ 34.928004][ T112] ata2.00: FORCE: PHY spd limit set to 1.5Gbps <-- OK!
[ 34.934110][ T112] ata2.01: FORCE: PHY spd limit set to 1.5Gbps
[ 34.940182][ T112] ata2.02: FORCE: PHY spd limit set to 1.5Gbps
[ 34.946276][ T112] ata2.03: FORCE: PHY spd limit set to 1.5Gbps
[ 34.952346][ T112] ata2.04: FORCE: PHY spd limit set to 1.5Gbps
[ 34.958446][ T112] ata2.05: FORCE: PHY spd limit set to 1.5Gbps
[ 34.964539][ T112] ata2.06: FORCE: PHY spd limit set to 1.5Gbps
[ 34.970609][ T112] ata2.07: FORCE: PHY spd limit set to 1.5Gbps
[ 34.976785][ T112] ata2.00: hard resetting link
[ 34.981430][ T112] hardreset, Online=>Offline
[ 34.981466][ T112] Reconfig spd
[ 34.987235][ T112] resume, do loop
[ 35.212851][ T112] resume, after do loop
[ 35.221492][ T112] debounce, SCR=0x123
[ 35.230644][ T112] debounce, SCR=0x123
[ 35.239620][ T112] debounce, SCR=0x123
[ 35.248595][ T112] debounce, SCR=0x123
[ 35.257553][ T112] debounce, SCR=0x123
[ 35.266511][ T112] debounce, SCR=0x123
[ 35.275470][ T112] debounce, SCR=0x123
[ 35.284427][ T112] debounce, SCR=0x123
[ 35.293385][ T112] debounce, SCR=0x123
[ 35.302342][ T112] debounce, SCR=0x123
[ 35.311317][ T112] debounce, SCR=0x123
[ 35.320294][ T112] debounce, SCR=0x123
[ 35.324232][ T112] resume, return at end of function
[ 35.328121][ T112] hardreset, Offline=>Online
[ 35.337681][ T112] hardreset, after check_ready
[ 35.337896][ T112] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 35.349762][ T112] ata2.01: hard resetting link ^
[ 35.354440][ T112] hardreset, Online=>Offline |
[ 35.354477][ T112] Reconfig spd |
[ 35.360222][ T112] resume, do loop |
[ 35.592850][ T112] resume, after do loop WHY?
[ 35.601489][ T112] debounce, SCR=0x123
[ 35.610638][ T112] debounce, SCR=0x123
[ 35.619614][ T112] debounce, SCR=0x123
[ 35.628590][ T112] debounce, SCR=0x123
[ 35.637546][ T112] debounce, SCR=0x123
[ 35.646505][ T112] debounce, SCR=0x123
[ 35.655462][ T112] debounce, SCR=0x123
[ 35.664419][ T112] debounce, SCR=0x123
[ 35.673376][ T112] debounce, SCR=0x123
[ 35.682333][ T112] debounce, SCR=0x123
[ 35.691308][ T112] debounce, SCR=0x123
[ 35.700286][ T112] debounce, SCR=0x123
[ 35.704222][ T112] resume, return at end of function
[ 35.708109][ T112] hardreset, Offline=>Online
[ 35.717668][ T112] hardreset, after check_ready
[ 35.717882][ T112] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 35.729745][ T112] ata2.02: hard resetting link
[ 35.734408][ T112] hardreset, Online=>Offline
[ 35.734445][ T112] Reconfig spd
[ 35.740187][ T112] resume, do loop
[ 35.972849][ T112] resume, after do loop
[ 35.981488][ T112] debounce, SCR=0x0
[ 35.990638][ T112] debounce, SCR=0x0
[ 35.999438][ T112] debounce, SCR=0x0
[ 36.008238][ T112] debounce, SCR=0x0
[ 36.017020][ T112] debounce, SCR=0x0
[ 36.025803][ T112] debounce, SCR=0x0
[ 36.034586][ T112] debounce, SCR=0x0
[ 36.043368][ T112] debounce, SCR=0x0
[ 36.052150][ T112] debounce, SCR=0x0
[ 36.060951][ T112] debounce, SCR=0x0
[ 36.069751][ T112] debounce, SCR=0x0
[ 36.078570][ T112] debounce, SCR=0x0
[ 36.087354][ T112] debounce, SCR=0x0
[ 36.091097][ T112] resume, return at end of function
[ 36.094830][ T112] hardreset, ata_phys_link_offline check failed
[ 36.100117][ T112] ata2.02: SATA link down (SStatus 0 SControl 300)
[ 36.112710][ T112] ata2.03: hard resetting link
[ 36.117371][ T112] hardreset, Online=>Offline
[ 36.117407][ T112] Reconfig spd
[ 36.123152][ T112] resume, do loop
[ 36.352850][ T112] resume, after do loop
[ 36.361489][ T112] debounce, SCR=0x0
[ 36.370639][ T112] debounce, SCR=0x0
[ 36.379440][ T112] debounce, SCR=0x0
[ 36.388241][ T112] debounce, SCR=0x0
[ 36.397023][ T112] debounce, SCR=0x0
[ 36.405806][ T112] debounce, SCR=0x0
[ 36.414589][ T112] debounce, SCR=0x0
[ 36.423372][ T112] debounce, SCR=0x0
[ 36.432154][ T112] debounce, SCR=0x0
[ 36.440954][ T112] debounce, SCR=0x0
[ 36.449755][ T112] debounce, SCR=0x0
[ 36.458556][ T112] debounce, SCR=0x0
[ 36.467339][ T112] debounce, SCR=0x0
[ 36.471083][ T112] resume, return at end of function
[ 36.474816][ T112] hardreset, ata_phys_link_offline check failed
[ 36.480102][ T112] ata2.03: SATA link down (SStatus 0 SControl 300)
[ 36.492694][ T112] ata2.04: hard resetting link
[ 36.497357][ T112] hardreset, Online=>Offline
[ 36.497393][ T112] Reconfig spd
[ 36.503138][ T112] resume, do loop
[ 36.732849][ T112] resume, after do loop
[ 36.741487][ T112] debounce, SCR=0x0
[ 36.750637][ T112] debounce, SCR=0x0
[ 36.759438][ T112] debounce, SCR=0x0
[ 36.768238][ T112] debounce, SCR=0x0
[ 36.777022][ T112] debounce, SCR=0x0
[ 36.785805][ T112] debounce, SCR=0x0
[ 36.794588][ T112] debounce, SCR=0x0
[ 36.803370][ T112] debounce, SCR=0x0
[ 36.812152][ T112] debounce, SCR=0x0
[ 36.820952][ T112] debounce, SCR=0x0
[ 36.829752][ T112] debounce, SCR=0x0
[ 36.838554][ T112] debounce, SCR=0x0
[ 36.847337][ T112] debounce, SCR=0x0
[ 36.851081][ T112] resume, return at end of function
[ 36.854813][ T112] hardreset, ata_phys_link_offline check failed
[ 36.860099][ T112] ata2.04: SATA link down (SStatus 0 SControl 300)
[ 36.872692][ T112] ata2.05: hard resetting link
[ 36.877353][ T112] hardreset, Online=>Offline
[ 36.877390][ T112] Reconfig spd
[ 36.883134][ T112] resume, do loop
[ 37.112853][ T112] resume, after do loop
[ 37.121495][ T112] debounce, SCR=0x0
[ 37.130645][ T112] debounce, SCR=0x0
[ 37.139446][ T112] debounce, SCR=0x0
[ 37.148246][ T112] debounce, SCR=0x0
[ 37.157029][ T112] debounce, SCR=0x0
[ 37.165812][ T112] debounce, SCR=0x0
[ 37.174595][ T112] debounce, SCR=0x0
[ 37.183377][ T112] debounce, SCR=0x0
[ 37.192159][ T112] debounce, SCR=0x0
[ 37.200960][ T112] debounce, SCR=0x0
[ 37.209760][ T112] debounce, SCR=0x0
[ 37.218562][ T112] debounce, SCR=0x0
[ 37.227345][ T112] debounce, SCR=0x0
[ 37.231088][ T112] resume, return at end of function
[ 37.234820][ T112] hardreset, ata_phys_link_offline check failed
[ 37.240107][ T112] ata2.05: SATA link down (SStatus 0 SControl 300)
[ 37.252700][ T112] ata2.06: hard resetting link
[ 37.257361][ T112] hardreset, Online=>Offline
[ 37.257398][ T112] Reconfig spd
[ 37.263142][ T112] resume, do loop
[ 37.492850][ T112] resume, after do loop
[ 37.501489][ T112] debounce, SCR=0x0
[ 37.510639][ T112] debounce, SCR=0x0
[ 37.519439][ T112] debounce, SCR=0x0
[ 37.528240][ T112] debounce, SCR=0x0
[ 37.537023][ T112] debounce, SCR=0x0
[ 37.545806][ T112] debounce, SCR=0x0
[ 37.554588][ T112] debounce, SCR=0x0
[ 37.563371][ T112] debounce, SCR=0x0
[ 37.572154][ T112] debounce, SCR=0x0
[ 37.580955][ T112] debounce, SCR=0x0
[ 37.589755][ T112] debounce, SCR=0x0
[ 37.598557][ T112] debounce, SCR=0x0
[ 37.607339][ T112] debounce, SCR=0x0
[ 37.611082][ T112] resume, return at end of function
[ 37.614814][ T112] hardreset, ata_phys_link_offline check failed
[ 37.620099][ T112] ata2.06: SATA link down (SStatus 0 SControl 300)
[ 37.632690][ T112] ata2.07: hard resetting link
[ 37.637353][ T112] hardreset, Online=>Offline
[ 37.637388][ T112] Reconfig spd
[ 37.643133][ T112] resume, do loop
[ 37.872850][ T112] resume, after do loop
[ 37.881488][ T112] debounce, SCR=0x0
[ 37.890637][ T112] debounce, SCR=0x0
[ 37.899438][ T112] debounce, SCR=0x0
[ 37.908239][ T112] debounce, SCR=0x0
[ 37.917021][ T112] debounce, SCR=0x0
[ 37.925804][ T112] debounce, SCR=0x0
[ 37.934587][ T112] debounce, SCR=0x0
[ 37.943370][ T112] debounce, SCR=0x0
[ 37.952152][ T112] debounce, SCR=0x0
[ 37.960952][ T112] debounce, SCR=0x0
[ 37.969752][ T112] debounce, SCR=0x0
[ 37.978555][ T112] debounce, SCR=0x0
[ 37.987338][ T112] debounce, SCR=0x0
[ 37.991082][ T112] resume, return at end of function
[ 37.994814][ T112] hardreset, ata_phys_link_offline check failed
[ 38.000100][ T112] ata2.07: SATA link down (SStatus 0 SControl 300)
[ 38.012779][ T112] ata2.00: ATA-6: WDC WD50ARC-5040-VOL#01, 0100 AX, max UDMA/133
[ 38.020410][ T112] ata2.00: 976773168 sectors, multi 0: LBA48
[ 38.026514][ T112] ata2.00: configured for UDMA/133
[ 38.031581][ T112] ata2.01: ATA-6: Areca Archive, 0100 AX, max UDMA/133
[ 38.038512][ T112] ata2.01: 23437498368 sectors, multi 0: LBA48
[ 38.044787][ T112] ata2.01: configured for UDMA/133
[ 38.049919][ T112] ata2: EH complete
[ 38.054454][ T58] scsi 1:0:0:0: Direct-Access ATA WDC WD50ARC-5040 n/a PQ: 0 ANSI: 5
[ 38.064242][ T58] device: 'target1:0:0': device_add
[ 38.069370][ T58] bus: 'scsi': add device target1:0:0
[ 38.074767][ T58] device: '1:0:0:0': device_add
[ 38.079843][ T58] bus: 'scsi': add device 1:0:0:0
[ 38.084831][ T58] scsi 1:0:0:0: scheduling asynchronous probe
[ 38.090835][ T58] device: '1:0:0:0': device_add
[ 38.090848][ T117] bus: 'scsi': __driver_probe_device: matched device 1:0:0:0 with driver sd
[ 38.095746][ T58] device: '1:0:0:0': device_add
[ 38.104210][ T117] bus: 'scsi': really_probe: probing driver sd with device 1:0:0:0
[ 38.117256][ T117] sd 1:0:0:0: no default pinctrl state
[ 38.122722][ T117] device: '1:0:0:0': device_add
[ 38.123554][ T58] scsi 1:1:0:0: Direct-Access ATA Areca Archive n/a PQ: 0 ANSI: 5
[ 38.127910][ T117] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 38.137665][ T58] device: 'target1:1:0': device_add
[ 38.144920][ T117] sd 1:0:0:0: [sdb] Write Protect is off
[ 38.149702][ T58] bus: 'scsi': add device target1:1:0
[ 38.155226][ T117] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 38.160531][ T58] device: '1:1:0:0': device_add
[ 38.166371][ T117] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
[ 38.171768][ T58] bus: 'scsi': add device 1:1:0:0
[ 38.180968][ T117] sd 1:0:0:0: [sdb] Preferred minimum I/O size 512 bytes
[ 38.185759][ T58] scsi 1:1:0:0: scheduling asynchronous probe
[ 38.192625][ T117] device: 'sdb': device_add
[ 38.199208][ T58] device: '1:1:0:0': device_add
[ 38.203409][ T21] bus: 'scsi': __driver_probe_device: matched device 1:1:0:0 with driver sd
[ 38.208171][ T58] device: '1:1:0:0': device_add
[ 38.216301][ T21] bus: 'scsi': really_probe: probing driver sd with device 1:1:0:0
[ 38.228860][ T21] sd 1:1:0:0: no default pinctrl state
[ 38.234346][ T21] device: '1:1:0:0': device_add
[ 38.240819][ T117] device: '8:16': device_add
[ 38.247070][ T117] sd 1:0:0:0: [sdb] Attached SCSI removable disk
[ 38.253360][ T117] driver: 'sd': driver_bound: bound to device '1:0:0:0'
[ 38.260231][ T117] bus: 'scsi': really_probe: bound device 1:0:0:0 to driver sd
[ 38.262841][ T21] sd 1:1:0:0: [sdc] 23437498368 512-byte logical blocks: (12.0 TB/10.9 TiB)
[ 38.267709][ T117] sd 1:0:0:0: async probe completed
[ 38.276356][ T21] sd 1:1:0:0: [sdc] Write Protect is off
[ 38.286864][ T21] sd 1:1:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 38.292945][ T21] sd 1:1:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
[ 38.303020][ T21] sd 1:1:0:0: [sdc] Preferred minimum I/O size 512 bytes
[ 38.309950][ T21] device: 'sdc': device_add
[ 38.316143][ T21] device: '8:32': device_add
[ 38.322104][ T21] sd 1:1:0:0: [sdc] Attached SCSI removable disk
[ 38.328368][ T21] driver: 'sd': driver_bound: bound to device '1:1:0:0'
[ 38.335279][ T21] bus: 'scsi': really_probe: bound device 1:1:0:0 to driver sd
[ 38.342721][ T21] sd 1:1:0:0: async probe completed
Note that the kernel command doesn't seem to actually limit the speed.
I looked in /sys too, and it matches kernel log:
/sys/devices/platform/soc/soc:internal-regs/f10a8000.sata # find -type f -name *spd* -print -exec cat {} \;
./ata1/link1/dev1.0/ata_device/dev1.0/spdn_cnt
0
./ata1/link1/ata_link/link1/sata_spd_limit
<unknown>
./ata1/link1/ata_link/link1/hw_sata_spd_limit
<unknown>
./ata1/link1/ata_link/link1/sata_spd
<unknown>
./ata2/link2.2/dev2.2.0/ata_device/dev2.2.0/spdn_cnt
0
./ata2/link2.2/ata_link/link2.2/sata_spd_limit
1.5 Gbps
./ata2/link2.2/ata_link/link2.2/hw_sata_spd_limit
1.5 Gbps
./ata2/link2.2/ata_link/link2.2/sata_spd
<unknown>
./ata2/link2.12/dev2.12.0/ata_device/dev2.12.0/spdn_cnt
0
./ata2/link2.12/ata_link/link2.12/sata_spd_limit
<unknown>
./ata2/link2.12/ata_link/link2.12/hw_sata_spd_limit
<unknown>
./ata2/link2.12/ata_link/link2.12/sata_spd
<unknown>
./ata2/link2.0/dev2.0.0/ata_device/dev2.0.0/spdn_cnt
0
./ata2/link2.0/ata_link/link2.0/sata_spd_limit
1.5 Gbps
./ata2/link2.0/ata_link/link2.0/hw_sata_spd_limit
1.5 Gbps
./ata2/link2.0/ata_link/link2.0/sata_spd
3.0 Gbps
./ata2/link2.10/dev2.10.0/ata_device/dev2.10.0/spdn_cnt
0
./ata2/link2.10/ata_link/link2.10/sata_spd_limit
<unknown>
./ata2/link2.10/ata_link/link2.10/hw_sata_spd_limit
<unknown>
./ata2/link2.10/ata_link/link2.10/sata_spd
<unknown>
./ata2/link2.9/ata_link/link2.9/sata_spd_limit
<unknown>
./ata2/link2.9/ata_link/link2.9/hw_sata_spd_limit
<unknown>
./ata2/link2.9/ata_link/link2.9/sata_spd
<unknown>
./ata2/link2.9/dev2.9.0/ata_device/dev2.9.0/spdn_cnt
0
./ata2/link2.7/dev2.7.0/ata_device/dev2.7.0/spdn_cnt
0
./ata2/link2.7/ata_link/link2.7/sata_spd_limit
1.5 Gbps
./ata2/link2.7/ata_link/link2.7/hw_sata_spd_limit
1.5 Gbps
./ata2/link2.7/ata_link/link2.7/sata_spd
<unknown>
./ata2/link2.5/dev2.5.0/ata_device/dev2.5.0/spdn_cnt
0
./ata2/link2.5/ata_link/link2.5/sata_spd_limit
1.5 Gbps
./ata2/link2.5/ata_link/link2.5/hw_sata_spd_limit
1.5 Gbps
./ata2/link2.5/ata_link/link2.5/sata_spd
<unknown>
./ata2/link2.3/dev2.3.0/ata_device/dev2.3.0/spdn_cnt
0
./ata2/link2.3/ata_link/link2.3/sata_spd_limit
1.5 Gbps
./ata2/link2.3/ata_link/link2.3/hw_sata_spd_limit
1.5 Gbps
./ata2/link2.3/ata_link/link2.3/sata_spd
<unknown>
./ata2/link2.13/dev2.13.0/ata_device/dev2.13.0/spdn_cnt
0
./ata2/link2.13/ata_link/link2.13/sata_spd_limit
<unknown>
./ata2/link2.13/ata_link/link2.13/hw_sata_spd_limit
<unknown>
./ata2/link2.13/ata_link/link2.13/sata_spd
<unknown>
./ata2/link2.1/dev2.1.0/ata_device/dev2.1.0/spdn_cnt
0
./ata2/link2.1/ata_link/link2.1/sata_spd_limit
1.5 Gbps
./ata2/link2.1/ata_link/link2.1/hw_sata_spd_limit
1.5 Gbps
./ata2/link2.1/ata_link/link2.1/sata_spd
3.0 Gbps
./ata2/link2/dev2.0/ata_device/dev2.0/spdn_cnt
0
./ata2/link2/ata_link/link2/sata_spd_limit
1.5 Gbps
./ata2/link2/ata_link/link2/hw_sata_spd_limit
1.5 Gbps
./ata2/link2/ata_link/link2/sata_spd
1.5 Gbps
./ata2/link2.11/ata_link/link2.11/sata_spd_limit
<unknown>
./ata2/link2.11/ata_link/link2.11/hw_sata_spd_limit
<unknown>
./ata2/link2.11/ata_link/link2.11/sata_spd
<unknown>
./ata2/link2.11/dev2.11.0/ata_device/dev2.11.0/spdn_cnt
0
./ata2/link2.8/dev2.8.0/ata_device/dev2.8.0/spdn_cnt
0
./ata2/link2.8/ata_link/link2.8/sata_spd_limit
<unknown>
./ata2/link2.8/ata_link/link2.8/hw_sata_spd_limit
<unknown>
./ata2/link2.8/ata_link/link2.8/sata_spd
<unknown>
./ata2/link2.6/ata_link/link2.6/sata_spd_limit
1.5 Gbps
./ata2/link2.6/ata_link/link2.6/hw_sata_spd_limit
1.5 Gbps
./ata2/link2.6/ata_link/link2.6/sata_spd
<unknown>
./ata2/link2.6/dev2.6.0/ata_device/dev2.6.0/spdn_cnt
0
./ata2/link2.4/dev2.4.0/ata_device/dev2.4.0/spdn_cnt
0
./ata2/link2.4/ata_link/link2.4/sata_spd_limit
1.5 Gbps
./ata2/link2.4/ata_link/link2.4/hw_sata_spd_limit
1.5 Gbps
./ata2/link2.4/ata_link/link2.4/sata_spd
<unknown>
./ata2/link2.14/ata_link/link2.14/sata_spd_limit
<unknown>
./ata2/link2.14/ata_link/link2.14/hw_sata_spd_limit
<unknown>
./ata2/link2.14/ata_link/link2.14/sata_spd
<unknown>
./ata2/link2.14/dev2.14.0/ata_device/dev2.14.0/spdn_cnt
0
Marius Dinu
next prev parent reply other threads:[~2022-12-08 18:07 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-01 19:21 Bug report for ahci-mvebu driver Dinu Marius
2022-11-06 7:05 ` Damien Le Moal
2022-11-07 9:22 ` marius
2022-11-08 6:27 ` Damien Le Moal
2022-11-09 19:52 ` marius
2022-11-09 19:55 ` marius
2022-11-10 2:05 ` Damien Le Moal
2022-11-11 22:32 ` marius
2022-11-12 1:57 ` Damien Le Moal
2022-11-14 20:52 ` marius
2022-11-15 3:02 ` Damien Le Moal
2022-11-15 7:28 ` marius
2022-11-15 8:10 ` Damien Le Moal
2022-11-18 18:24 ` Dinu Marius
2022-11-24 2:40 ` Damien Le Moal
2022-12-04 1:41 ` marius
2022-12-04 10:22 ` Pali Rohár
2022-12-04 21:14 ` marius
2022-12-04 21:46 ` Pali Rohár
2022-12-05 2:02 ` Damien Le Moal
2022-12-06 6:08 ` Damien Le Moal
2022-12-08 21:26 ` Pali Rohár
2022-12-09 1:54 ` Damien Le Moal
2022-12-07 18:27 ` marius
2022-12-07 21:54 ` Damien Le Moal
2022-12-07 22:51 ` Damien Le Moal
2022-12-08 18:06 ` marius [this message]
2022-12-09 0:34 ` Damien Le Moal
2022-12-09 2:58 ` Damien Le Moal
2022-12-09 7:31 ` marius
2022-12-09 9:28 ` Damien Le Moal
2022-12-09 18:30 ` marius
2023-01-14 18:01 ` marius
2023-01-15 23:37 ` Damien Le Moal
2023-01-17 8:26 ` Damien Le Moal
2023-01-18 19:43 ` marius
2023-01-19 0:29 ` Damien Le Moal
2023-01-19 18:46 ` marius
2023-01-23 7:02 ` Damien Le Moal
2023-01-23 20:00 ` marius
2023-01-23 23:00 ` Damien Le Moal
2023-01-24 8:04 ` marius
2023-01-24 9:53 ` Damien Le Moal
2023-01-24 17:02 ` marius
2023-01-27 5:13 ` Damien Le Moal
2023-01-27 6:28 ` Damien Le Moal
2023-01-28 17:08 ` marius
2023-01-29 2:23 ` Damien Le Moal
2023-01-29 10:24 ` marius
2023-01-30 1:16 ` Damien Le Moal
2023-01-30 2:38 ` Damien Le Moal
2023-01-30 7:23 ` marius
2023-01-30 7:37 ` Damien Le Moal
2023-01-30 23:22 ` Damien Le Moal
2023-01-31 7:20 ` marius
2023-01-31 7:28 ` Damien Le Moal
2023-02-07 18:40 ` marius
2023-02-07 23:39 ` Damien Le Moal
2023-02-08 12:17 ` marius
2023-02-08 23:00 ` Damien Le Moal
2023-02-12 13:14 ` marius
2023-02-12 23:11 ` Damien Le Moal
2023-01-24 17:06 ` Bug report for sata_via driver marius
2023-01-25 1:26 ` Damien Le Moal
2022-11-26 14:26 ` Bug report for ahci-mvebu driver Pali Rohár
2023-01-23 9:10 ` Hajo Noerenberg
2023-01-23 12:13 ` Damien Le Moal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=77b389a080646567b9f9d44caa42d547@psihoexpert.ro \
--to=marius@psihoexpert.ro \
--cc=damien.lemoal@opensource.wdc.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.