From: John Crispin <john@phrozen.org> To: sean.wang@mediatek.com, andrew@lunn.ch, f.fainelli@gmail.com, vivien.didelot@savoirfairelinux.com, matthias.bgg@gmail.com, robh+dt@kernel.org, mark.rutland@arm.com Cc: devicetree@vger.kernel.org, Landen.Chao@mediatek.com, keyhaede@gmail.com, netdev@vger.kernel.org, linux-kernel@vger.kernel.org, linux-mediatek@lists.infradead.org, objelf@gmail.com, davem@davemloft.net Subject: Re: [PATCH net-next 0/4] net-next: dsa: add Mediatek MT7530 support Date: Mon, 13 Mar 2017 17:25:30 +0100 [thread overview] Message-ID: <09927247-dd22-d341-e58c-c8f36fba4755@phrozen.org> (raw) In-Reply-To: <1489421488-300-1-git-send-email-sean.wang@mediatek.com> On 13/03/17 17:11, sean.wang@mediatek.com wrote: > From: Sean Wang <sean.wang@mediatek.com> > > MT7530 is a 7-ports Gigabit Ethernet Switch that could be found on > Mediatek router platforms such as MT7623A or MT7623N which includes 7-port > Gigabit Ethernet MAC and 5-port Gigabit Ethernet PHY. Among these ports, > The port from 0 to 4 are the user ports connecting with the remote devices > while the port 5 and 6 are the CPU ports connecting into Mediatek Ethernet > GMAC. > > The patch series integrated Mediatek MT7530 into DSA support which > includes the most of the essential callbacks such as tag insertion for > port distinguishing, port control, bridge offloading, STP setup and > ethtool operations to allow DSA to model each user port into independently > standalone netdevice as the other DSA driver had done. Hi Sean, very cool, i'll give this a spin this week and if it works out will import it into LEDE to get test coverage from our users. John > Sean Wang (4): > dt-bindings: net: dsa: add mt7530 binding > net-next: dsa: add Mediatek tag RX/TX handler > net-next: ethernet: mediatek: add CMD ingress recognize the special > tag > net-next: dsa: add dsa support for Mediatek MT7530 switch > > .../devicetree/bindings/net/dsa/mt7530.txt | 96 ++ > drivers/net/dsa/Kconfig | 8 + > drivers/net/dsa/Makefile | 2 +- > drivers/net/dsa/mt7530.c | 1195 ++++++++++++++++++++ > drivers/net/dsa/mt7530.h | 387 +++++++ > drivers/net/ethernet/mediatek/mtk_eth_soc.c | 8 + > drivers/net/ethernet/mediatek/mtk_eth_soc.h | 5 + > include/net/dsa.h | 1 + > net/dsa/Kconfig | 2 + > net/dsa/Makefile | 1 + > net/dsa/dsa.c | 3 + > net/dsa/dsa_priv.h | 3 + > net/dsa/tag_mtk.c | 121 ++ > 13 files changed, 1831 insertions(+), 1 deletion(-) > create mode 100644 Documentation/devicetree/bindings/net/dsa/mt7530.txt > create mode 100644 drivers/net/dsa/mt7530.c > create mode 100644 drivers/net/dsa/mt7530.h > create mode 100644 net/dsa/tag_mtk.c >
WARNING: multiple messages have this Message-ID (diff)
From: John Crispin <john-Pj+rj9U5foFAfugRpC6u6w@public.gmane.org> To: sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org, andrew-g2DYL2Zd6BY@public.gmane.org, f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org, vivien.didelot-4ysUXcep3aM1wj+D4I0NRVaTQe2KTcn/@public.gmane.org, matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org, robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, mark.rutland-5wv7dgnIgG8@public.gmane.org Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Landen.Chao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org, keyhaede-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org, netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, objelf-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org, davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org Subject: Re: [PATCH net-next 0/4] net-next: dsa: add Mediatek MT7530 support Date: Mon, 13 Mar 2017 17:25:30 +0100 [thread overview] Message-ID: <09927247-dd22-d341-e58c-c8f36fba4755@phrozen.org> (raw) In-Reply-To: <1489421488-300-1-git-send-email-sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> On 13/03/17 17:11, sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org wrote: > From: Sean Wang <sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> > > MT7530 is a 7-ports Gigabit Ethernet Switch that could be found on > Mediatek router platforms such as MT7623A or MT7623N which includes 7-port > Gigabit Ethernet MAC and 5-port Gigabit Ethernet PHY. Among these ports, > The port from 0 to 4 are the user ports connecting with the remote devices > while the port 5 and 6 are the CPU ports connecting into Mediatek Ethernet > GMAC. > > The patch series integrated Mediatek MT7530 into DSA support which > includes the most of the essential callbacks such as tag insertion for > port distinguishing, port control, bridge offloading, STP setup and > ethtool operations to allow DSA to model each user port into independently > standalone netdevice as the other DSA driver had done. Hi Sean, very cool, i'll give this a spin this week and if it works out will import it into LEDE to get test coverage from our users. John > Sean Wang (4): > dt-bindings: net: dsa: add mt7530 binding > net-next: dsa: add Mediatek tag RX/TX handler > net-next: ethernet: mediatek: add CMD ingress recognize the special > tag > net-next: dsa: add dsa support for Mediatek MT7530 switch > > .../devicetree/bindings/net/dsa/mt7530.txt | 96 ++ > drivers/net/dsa/Kconfig | 8 + > drivers/net/dsa/Makefile | 2 +- > drivers/net/dsa/mt7530.c | 1195 ++++++++++++++++++++ > drivers/net/dsa/mt7530.h | 387 +++++++ > drivers/net/ethernet/mediatek/mtk_eth_soc.c | 8 + > drivers/net/ethernet/mediatek/mtk_eth_soc.h | 5 + > include/net/dsa.h | 1 + > net/dsa/Kconfig | 2 + > net/dsa/Makefile | 1 + > net/dsa/dsa.c | 3 + > net/dsa/dsa_priv.h | 3 + > net/dsa/tag_mtk.c | 121 ++ > 13 files changed, 1831 insertions(+), 1 deletion(-) > create mode 100644 Documentation/devicetree/bindings/net/dsa/mt7530.txt > create mode 100644 drivers/net/dsa/mt7530.c > create mode 100644 drivers/net/dsa/mt7530.h > create mode 100644 net/dsa/tag_mtk.c >
next prev parent reply other threads:[~2017-03-13 16:50 UTC|newest] Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top 2017-03-13 16:11 [PATCH net-next 0/4] net-next: dsa: add Mediatek MT7530 support sean.wang 2017-03-13 16:11 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w 2017-03-13 16:11 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w 2017-03-13 16:11 ` [PATCH net-next 1/4] dt-bindings: net: dsa: add Mediatek MT7530 binding sean.wang 2017-03-13 16:11 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w 2017-03-13 16:11 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w 2017-03-13 16:36 ` Andrew Lunn 2017-03-13 16:36 ` Andrew Lunn 2017-03-14 6:06 ` Sean Wang 2017-03-14 6:06 ` Sean Wang 2017-03-14 6:06 ` Sean Wang 2017-03-13 16:47 ` Florian Fainelli 2017-03-13 16:47 ` Florian Fainelli 2017-03-14 6:52 ` Sean Wang 2017-03-14 6:52 ` Sean Wang 2017-03-14 11:58 ` Andrew Lunn 2017-03-14 11:58 ` Andrew Lunn 2017-03-13 16:11 ` [PATCH net-next 2/4] net-next: dsa: add Mediatek tag RX/TX handler sean.wang 2017-03-13 16:11 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w 2017-03-13 16:11 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w 2017-03-13 16:27 ` Andrew Lunn 2017-03-13 16:27 ` Andrew Lunn 2017-03-13 16:35 ` Florian Fainelli 2017-03-13 16:35 ` Florian Fainelli 2017-03-14 6:16 ` Sean Wang 2017-03-14 6:16 ` Sean Wang 2017-03-13 16:59 ` Vivien Didelot 2017-03-13 16:59 ` Vivien Didelot 2017-03-14 6:22 ` Sean Wang 2017-03-14 6:22 ` Sean Wang 2017-03-14 13:38 ` Vivien Didelot 2017-03-14 13:38 ` Vivien Didelot 2017-03-13 16:11 ` [PATCH net-next 3/4] net-next: ethernet: mediatek: add CDM able to recognize the tag for DSA sean.wang 2017-03-13 16:11 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w 2017-03-13 16:11 ` sean.wang-NuS5LvNUpcJWk0Htik3J/w 2017-03-13 16:30 ` Andrew Lunn 2017-03-13 16:39 ` Florian Fainelli 2017-03-13 16:11 ` [PATCH net-next 4/4] net-next: dsa: add dsa support for Mediatek MT7530 switch sean.wang 2017-03-13 16:11 ` sean.wang 2017-03-13 16:41 ` Andrew Lunn 2017-03-13 16:41 ` Andrew Lunn 2017-03-13 23:11 ` Andrew Lunn 2017-03-13 23:11 ` Andrew Lunn 2017-03-14 7:03 ` Sean Wang 2017-03-14 7:03 ` Sean Wang 2017-03-14 7:03 ` Sean Wang 2017-03-15 2:20 ` kbuild test robot 2017-03-15 2:20 ` kbuild test robot 2017-03-15 2:20 ` kbuild test robot 2017-03-15 2:30 ` kbuild test robot 2017-03-15 2:30 ` kbuild test robot 2017-03-13 16:25 ` John Crispin [this message] 2017-03-13 16:25 ` [PATCH net-next 0/4] net-next: dsa: add Mediatek MT7530 support John Crispin
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=09927247-dd22-d341-e58c-c8f36fba4755@phrozen.org \ --to=john@phrozen.org \ --cc=Landen.Chao@mediatek.com \ --cc=andrew@lunn.ch \ --cc=davem@davemloft.net \ --cc=devicetree@vger.kernel.org \ --cc=f.fainelli@gmail.com \ --cc=keyhaede@gmail.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-mediatek@lists.infradead.org \ --cc=mark.rutland@arm.com \ --cc=matthias.bgg@gmail.com \ --cc=netdev@vger.kernel.org \ --cc=objelf@gmail.com \ --cc=robh+dt@kernel.org \ --cc=sean.wang@mediatek.com \ --cc=vivien.didelot@savoirfairelinux.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.