All of lore.kernel.org
 help / color / mirror / Atom feed
From: Krzysztof Adamski <krzysztof.adamski@nokia.com>
To: Guenter Roeck <linux@roeck-us.net>, Jean Delvare <jdelvare@suse.com>
Cc: Rob Herring <robh+dt@kernel.org>,
	linux-hwmon@vger.kernel.org, devicetree@vger.kernel.org
Subject: [PATCH v3 07/11] hwmon: (tmp421) really disable channels
Date: Thu, 30 Sep 2021 09:09:15 +0200	[thread overview]
Message-ID: <0be8ec1796909533d8a608ce58e2230e917b172c.1632984254.git.krzysztof.adamski@nokia.com> (raw)
In-Reply-To: <cover.1632984254.git.krzysztof.adamski@nokia.com>

Recent patch added possibility to disable selected channels. That would
only make sure that the ENODATA is returned for those channels but would
not configure the actual hardware.

With this patch, the config register is written to make sure the
channels are disabled also at hardware level.

Signed-off-by: Krzysztof Adamski <krzysztof.adamski@nokia.com>
---
 drivers/hwmon/tmp421.c | 41 +++++++++++++++++++++++++++++++++++------
 1 file changed, 35 insertions(+), 6 deletions(-)

diff --git a/drivers/hwmon/tmp421.c b/drivers/hwmon/tmp421.c
index b32fd2b6ed07..f9c6f23f1f0f 100644
--- a/drivers/hwmon/tmp421.c
+++ b/drivers/hwmon/tmp421.c
@@ -33,6 +33,9 @@ enum chips { tmp421, tmp422, tmp423, tmp441, tmp442 };
 /* The TMP421 registers */
 #define TMP421_STATUS_REG			0x08
 #define TMP421_CONFIG_REG_1			0x09
+#define TMP421_CONFIG_REG_2			0x0A
+#define TMP421_CONFIG_REG_REN(x)		(BIT(3 + (x)))
+#define TMP421_CONFIG_REG_REN_MASK		GENMASK(6, 3)
 #define TMP421_CONVERSION_RATE_REG		0x0B
 #define TMP421_N_FACTOR_REG_1			0x21
 #define TMP421_MANUFACTURER_ID_REG		0xFE
@@ -162,6 +165,31 @@ static int tmp421_update_device(struct tmp421_data *data)
 	return 0;
 }
 
+static int tmp421_enable_channels(struct tmp421_data *data)
+{
+	int err;
+	struct i2c_client *client = data->client;
+	struct device *dev = &client->dev;
+	int cfg = i2c_smbus_read_byte_data(client, TMP421_CONFIG_REG_2);
+	int i;
+
+	if (cfg < 0) {
+		dev_err(dev, "error reading register, can't disable channels\n");
+		return err;
+	}
+
+	cfg &= ~TMP421_CONFIG_REG_REN_MASK;
+	for (i = 0; i < data->channels; i++)
+		if (data->channel[i].enabled)
+			cfg |= TMP421_CONFIG_REG_REN(i);
+
+	err = i2c_smbus_write_byte_data(client, TMP421_CONFIG_REG_2, cfg);
+	if (err < 0)
+		dev_err(dev, "error writing register, can't disable channels\n");
+
+	return err;
+}
+
 static int tmp421_read(struct device *dev, enum hwmon_sensor_types type,
 		       u32 attr, int channel, long *val)
 {
@@ -217,9 +245,10 @@ static umode_t tmp421_is_visible(const void *data, enum hwmon_sensor_types type,
 	}
 }
 
-static int tmp421_init_client(struct i2c_client *client)
+static int tmp421_init_client(struct tmp421_data *data)
 {
 	int config, config_orig;
+	struct i2c_client *client = data->client;
 
 	/* Set the conversion rate to 2 Hz */
 	i2c_smbus_write_byte_data(client, TMP421_CONVERSION_RATE_REG, 0x05);
@@ -240,7 +269,7 @@ static int tmp421_init_client(struct i2c_client *client)
 		i2c_smbus_write_byte_data(client, TMP421_CONFIG_REG_1, config);
 	}
 
-	return 0;
+	return tmp421_enable_channels(data);
 }
 
 static int tmp421_detect(struct i2c_client *client,
@@ -389,10 +418,6 @@ static int tmp421_probe(struct i2c_client *client)
 		data->channels = i2c_match_id(tmp421_id, client)->driver_data;
 	data->client = client;
 
-	err = tmp421_init_client(client);
-	if (err)
-		return err;
-
 	for (i = 0; i < data->channels; i++) {
 		data->temp_config[i] = HWMON_T_INPUT | HWMON_T_FAULT;
 		data->channel[i].enabled = true;
@@ -402,6 +427,10 @@ static int tmp421_probe(struct i2c_client *client)
 	if (err)
 		return err;
 
+	err = tmp421_init_client(data);
+	if (err)
+		return err;
+
 	data->chip.ops = &tmp421_ops;
 	data->chip.info = data->info;
 
-- 
2.31.1


  parent reply	other threads:[~2021-09-30  7:09 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-30  6:47 [PATCH v3 00/11] Add per channel properies support in tmp421 Krzysztof Adamski
2021-09-30  6:57 ` [PATCH v3 01/11] dt-bindings: hwmon: add missing tmp421 binding Krzysztof Adamski
2021-10-04 16:46   ` Rob Herring
2021-09-30  6:58 ` [PATCH v3 02/11] hwmon: (tmp421) introduce MAX_CHANNELS define Krzysztof Adamski
2021-09-30  6:58 ` [PATCH v3 03/11] hwmon: (tmp421) introduce a channel struct Krzysztof Adamski
2021-09-30  6:59 ` [PATCH v3 04/11] hwmon: (tmp421) add support for defining labels from DT Krzysztof Adamski
2021-10-02 14:08   ` Guenter Roeck
2021-10-04  7:27     ` Krzysztof Adamski
2021-09-30  7:05 ` [PATCH v3 05/11] hwmon: (tmp421) support disabling channels " Krzysztof Adamski
2021-09-30  7:08 ` [PATCH v3 06/11] hwmon: (tmp421) support specifying n-factor via DT Krzysztof Adamski
2021-09-30  7:09 ` Krzysztof Adamski [this message]
2021-09-30  7:15 ` [PATCH v3 08/11] hwmon: (tmp421) support HWMON_T_ENABLE Krzysztof Adamski
2021-09-30  7:16 ` [PATCH v3 09/11] hwmon: (tmp421) update documentation Krzysztof Adamski
2021-09-30  7:17 ` [PATCH v3 10/11] hwmon: (tmp421) ignore non input related DT nodes Krzysztof Adamski
2021-09-30  7:19 ` [PATCH v3 11/11] dt-bindings: hwmon: allow specifying channels for tmp421 Krzysztof Adamski
2021-10-02 14:22   ` Guenter Roeck
2021-10-04  7:36     ` Krzysztof Adamski
2021-10-05 14:14       ` Guenter Roeck
2021-10-06  8:31         ` Krzysztof Adamski
2021-10-06 20:55         ` Rob Herring
2021-10-07  7:51           ` Krzysztof Adamski
2021-10-08 14:33             ` Guenter Roeck
2021-10-08 19:18               ` Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=0be8ec1796909533d8a608ce58e2230e917b172c.1632984254.git.krzysztof.adamski@nokia.com \
    --to=krzysztof.adamski@nokia.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jdelvare@suse.com \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.