* [Bluez-devel] Re: blueZ-bthid testing [not found] <LAW11-OE33GHeqXipAS00015cf1@hotmail.com> @ 2004-01-05 14:54 ` Marcel Holtmann 2004-01-06 13:03 ` Deepesh S Gujarathi 0 siblings, 1 reply; 9+ messages in thread From: Marcel Holtmann @ 2004-01-05 14:54 UTC (permalink / raw) To: Deepesh S Gujarathi; +Cc: BlueZ Mailing List Hi, > I'm implementing the firmware for a bluetooth HID mouse using an > Ericsson module and using the bluez stack to test my implementation. > For a start I was trying to make the MS Intelliexplorer mouse work > with Marcels bthid program, but somehow havent been able to see the > cursor move, heres what all I did > > - downloaded a crisp new linux2.4.22 kernel from kernel.org > > - patched the kenel with patch-2.4.22-mh2.gz > > - recompiled the kenel with Input Core support (uinput.o) + BlueZ > modules + usb support (usb_ohci) modules etc. > > - reboot with linux2.4.22-mh2 kernel > > - downloaded the latest rpms and did a rpm update to bluez. > > - downloaded and compiled the libs2 and utils2 as per Marcel's > instructions (using --prefix /opt/bluetooth etc.) from cvs > > - added the following to the XFree86config-4 file > > Section "InputDevice" > Identifier "MSmouse" > driver "mouse" > option "Protocol" "IMPS/2" > option "Device" "/dev/input/mice" > option "ZAxisMapping" "4 5" > option "Buttons" "5" > option "Emulate3Buttons" "false" > EndSection > > and added > InputDevice "MSmouse" "SendCoreEvents" to the ServerLayout section > > - the following modules are present (lsmod) > > l2cap.o > bluez.o > input.o > uinput.o > usb_uhci.o > hci_usb.o > usb_core.o > > - run hcid daemon > > - run bthid daemon > > -run /opt/bluetooth/sbin/bthid -c 00:50:F2:E5:89:15 (here the > /var/log/messages shows the following ) > > bthid[2040]: cant open input device: no such file or directory (2) > bthid[2040]: connected: Microsoft Five Button Mouse > > when I do a hcitool scan, the local device detects the MS > IntelliExplorer mouse. but nothing happens further. > > am I missing something relevant ? what about creating the /dev/input/uinput device node? Regards Marcel ------------------------------------------------------- This SF.net email is sponsored by: IBM Linux Tutorials. Become an expert in LINUX or just sharpen your skills. Sign up for IBM's Free Linux Tutorials. Learn everything from the bash shell to sys admin. Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: blueZ-bthid testing 2004-01-05 14:54 ` [Bluez-devel] Re: blueZ-bthid testing Marcel Holtmann @ 2004-01-06 13:03 ` Deepesh S Gujarathi 2004-01-06 13:16 ` [Bluez-devel] " Marcel Holtmann 0 siblings, 1 reply; 9+ messages in thread From: Deepesh S Gujarathi @ 2004-01-06 13:03 UTC (permalink / raw) To: Marcel Holtmann; +Cc: BlueZ Mailing List Hi Marcel, I tried to create the device node using the following commands but I still get the same error ( > bthid[2040]: can't open input device: no such file or directory (2)) . I created a device node using the command # mknod /dev/misc/uinput c 10 101 I hope I an not feeding the wrong MAJOR device number. Do let me know the proper command to create the device nodes for creating uinput or mice node. thanks Deepesh > Hi, > > > I'm implementing the firmware for a bluetooth HID mouse using an > > Ericsson module and using the bluez stack to test my implementation. > > For a start I was trying to make the MS Intelliexplorer mouse work > > with Marcels bthid program, but somehow havent been able to see the > > cursor move, heres what all I did > > > > - downloaded a crisp new linux2.4.22 kernel from kernel.org > > > > - patched the kenel with patch-2.4.22-mh2.gz > > > > - recompiled the kenel with Input Core support (uinput.o) + BlueZ > > modules + usb support (usb_ohci) modules etc. > > > > - reboot with linux2.4.22-mh2 kernel > > > > - downloaded the latest rpms and did a rpm update to bluez. > > > > - downloaded and compiled the libs2 and utils2 as per Marcel's > > instructions (using --prefix /opt/bluetooth etc.) from cvs > > > > - added the following to the XFree86config-4 file > > > > Section "InputDevice" > > Identifier "MSmouse" > > driver "mouse" > > option "Protocol" "IMPS/2" > > option "Device" "/dev/input/mice" > > option "ZAxisMapping" "4 5" > > option "Buttons" "5" > > option "Emulate3Buttons" "false" > > EndSection > > > > and added > > InputDevice "MSmouse" "SendCoreEvents" to the ServerLayout section > > > > - the following modules are present (lsmod) > > > > l2cap.o > > bluez.o > > input.o > > uinput.o > > usb_uhci.o > > hci_usb.o > > usb_core.o > > > > - run hcid daemon > > > > - run bthid daemon > > > > -run /opt/bluetooth/sbin/bthid -c 00:50:F2:E5:89:15 (here the > > /var/log/messages shows the following ) > > > > bthid[2040]: cant open input device: no such file or directory (2) > > bthid[2040]: connected: Microsoft Five Button Mouse > > > > when I do a hcitool scan, the local device detects the MS > > IntelliExplorer mouse. but nothing happens further. > > > > am I missing something relevant ? > > what about creating the /dev/input/uinput device node? > > Regards > > Marcel > > > ^ permalink raw reply [flat|nested] 9+ messages in thread
* [Bluez-devel] Re: blueZ-bthid testing 2004-01-06 13:03 ` Deepesh S Gujarathi @ 2004-01-06 13:16 ` Marcel Holtmann 2004-01-07 12:56 ` Deepesh S Gujarathi 0 siblings, 1 reply; 9+ messages in thread From: Marcel Holtmann @ 2004-01-06 13:16 UTC (permalink / raw) To: Deepesh S Gujarathi; +Cc: BlueZ Mailing List Hi Deepesh, > I tried to create the device node using the following commands but I still > get the same error ( > bthid[2040]: can't open input device: no such file or > directory (2)) . > I created a device node using the command > # mknod /dev/misc/uinput c 10 101 > I hope I an not feeding the wrong MAJOR device number. yes you do. According to Documentation/devices.txt it is "c 10 223". And of course the kernel module "uinput" must be loaded. Regards Marcel ------------------------------------------------------- This SF.net email is sponsored by: IBM Linux Tutorials. Become an expert in LINUX or just sharpen your skills. Sign up for IBM's Free Linux Tutorials. Learn everything from the bash shell to sys admin. Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: blueZ-bthid testing 2004-01-06 13:16 ` [Bluez-devel] " Marcel Holtmann @ 2004-01-07 12:56 ` Deepesh S Gujarathi 2004-01-07 13:11 ` [Bluez-devel] " Marcel Holtmann 0 siblings, 1 reply; 9+ messages in thread From: Deepesh S Gujarathi @ 2004-01-07 12:56 UTC (permalink / raw) To: Marcel Holtmann; +Cc: BlueZ Mailing List Hi Marcel, I created the uinput node with the following command # mknod /dev/input/uinput c 10 223 and the bthid error (bthid[2040]: can't open input device: no such file or directory (2)) is gone, but for some reason I still cant move the cursor. - I checked the hcidump and it shows all the data coming from the MS wireless mouse as I move the mouse and click - the tail -f /var/log/messages shows the following Bluetooth HID service started Connected: Microsoft Five Button Mouse Vendor HID usage 0xff00fe01 value 0x1 adequate battery - when I do an lsmod I see Module Used by Not tainted uinput 1 hci_usb 1 l2cap 5 bluez 4 [hci_usb l2cap] input 0 (autoclean) [uinput] I doubt the following, if anyone can verify it would be great - my XF86Config-4 file consists Section "InputDevice" Identifier "MSmouse" driver "mouse" option "Protocol" "IMPS/2" option "Device" "/dev/input/mice" option "ZAxisMapping" "4 5" option "Buttons" "5" option "Emulate3Buttons" "false" EndSection now is the protocol IMPS/2 correct for a MS Intelliexplorer mouse (I copied it from the Logitech example) ? - also in the option "Device" the value specified as "/dev/input/mice" does it need to be /dev/input/uinput or something else ? - does the mousedev module need to be loaded to make it work ? I am determined to get this MS mouse working....;) thanks for your patience Deepesh Deepesh S Gujarathi Encodex Technologies (India) Pvt. Ltd. 69 Amchi Colony, Bavdhan Khurd Pune - 411021 91-20-2953590 , 2953591 URL: www.encodexindia.com ----- Original Message ----- From: "Marcel Holtmann" <marcel@holtmann.org> To: "Deepesh S Gujarathi" <d_gujarathi@hotmail.com> Cc: "BlueZ Mailing List" <bluez-devel@lists.sourceforge.net> Sent: Tuesday, January 06, 2004 6:46 PM Subject: Re: blueZ-bthid testing > Hi Deepesh, > > > I tried to create the device node using the following commands but I still > > get the same error ( > bthid[2040]: can't open input device: no such file or > > directory (2)) . > > I created a device node using the command > > # mknod /dev/misc/uinput c 10 101 > > I hope I an not feeding the wrong MAJOR device number. > > yes you do. According to Documentation/devices.txt it is "c 10 223". And > of course the kernel module "uinput" must be loaded. > > Regards > > Marcel > > > ^ permalink raw reply [flat|nested] 9+ messages in thread
* [Bluez-devel] Re: blueZ-bthid testing 2004-01-07 12:56 ` Deepesh S Gujarathi @ 2004-01-07 13:11 ` Marcel Holtmann 2004-01-08 11:09 ` Deepesh S Gujarathi 0 siblings, 1 reply; 9+ messages in thread From: Marcel Holtmann @ 2004-01-07 13:11 UTC (permalink / raw) To: Deepesh S Gujarathi; +Cc: BlueZ Mailing List Hi Deepesh, > I created the uinput node with the following command > # mknod /dev/input/uinput c 10 223 > and the bthid error (bthid[2040]: can't open input device: no such file or > directory (2)) is gone, but for some reason I still cant move the cursor. > > - I checked the hcidump and it shows all the data coming from the MS > wireless mouse as I move the mouse and click > > - the tail -f /var/log/messages shows the following > Bluetooth HID service started > Connected: Microsoft Five Button Mouse > Vendor HID usage 0xff00fe01 value 0x1 > adequate battery > > - when I do an lsmod I see > Module Used by Not tainted > uinput 1 > hci_usb 1 > l2cap 5 > bluez 4 [hci_usb l2cap] > input 0 (autoclean) [uinput] > > I doubt the following, if anyone can verify it would be great > > - my XF86Config-4 file consists > > Section "InputDevice" > Identifier "MSmouse" > driver "mouse" > option "Protocol" "IMPS/2" > option "Device" "/dev/input/mice" > option "ZAxisMapping" "4 5" > option "Buttons" "5" > option "Emulate3Buttons" "false" > EndSection > > now is the protocol IMPS/2 correct for a MS Intelliexplorer mouse (I copied > it from the Logitech example) ? yes it is, but maybe you need to have additional CorePointer options. Look at some XFree config howto's. > - also in the option "Device" the value specified as "/dev/input/mice" does > it need to be /dev/input/uinput or something else ? No. The mice device is correct. > - does the mousedev module need to be loaded to make it work ? Yes. Regards Marcel ------------------------------------------------------- This SF.net email is sponsored by: IBM Linux Tutorials. Become an expert in LINUX or just sharpen your skills. Sign up for IBM's Free Linux Tutorials. Learn everything from the bash shell to sys admin. Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: blueZ-bthid testing 2004-01-07 13:11 ` [Bluez-devel] " Marcel Holtmann @ 2004-01-08 11:09 ` Deepesh S Gujarathi 2004-01-08 12:07 ` [Bluez-devel] " Charles Bueche 0 siblings, 1 reply; 9+ messages in thread From: Deepesh S Gujarathi @ 2004-01-08 11:09 UTC (permalink / raw) To: Marcel Holtmann; +Cc: BlueZ Mailing List [-- Attachment #1: Type: text/plain, Size: 2764 bytes --] Hi all, Thanks to Marcel, finally the MS mouse is working effortlessly with the bthid program and I am a happy man. I had messed up two things, - had not loaded the mousedev.o module and - made a typo in the XF86Config-4 file. my two cents please find attached a howto document that details the steps involved in making the MS IntelliExplorer mouse working with Marcel's bthid utility. PS: maybe some one can just verify the howto document for any possible errors. thanks everyone for your patience. Deepesh Deepesh S Gujarathi Encodex Technologies (India) Pvt. Ltd. 69 Amchi Colony, Bavdhan Khurd Pune - 411021 91-20-2953590 , 2953591 URL: www.encodexindia.com ----- Original Message ----- From: "Marcel Holtmann" <marcel@holtmann.org> To: "Deepesh S Gujarathi" <d_gujarathi@hotmail.com> Cc: "BlueZ Mailing List" <bluez-devel@lists.sourceforge.net> Sent: Wednesday, January 07, 2004 6:41 PM Subject: Re: blueZ-bthid testing > Hi Deepesh, > > > I created the uinput node with the following command > > # mknod /dev/input/uinput c 10 223 > > and the bthid error (bthid[2040]: can't open input device: no such file or > > directory (2)) is gone, but for some reason I still cant move the cursor. > > > > - I checked the hcidump and it shows all the data coming from the MS > > wireless mouse as I move the mouse and click > > > > - the tail -f /var/log/messages shows the following > > Bluetooth HID service started > > Connected: Microsoft Five Button Mouse > > Vendor HID usage 0xff00fe01 value 0x1 > > adequate battery > > > > - when I do an lsmod I see > > Module Used by Not tainted > > uinput 1 > > hci_usb 1 > > l2cap 5 > > bluez 4 [hci_usb l2cap] > > input 0 (autoclean) [uinput] > > > > I doubt the following, if anyone can verify it would be great > > > > - my XF86Config-4 file consists > > > > Section "InputDevice" > > Identifier "MSmouse" > > driver "mouse" > > option "Protocol" "IMPS/2" > > option "Device" "/dev/input/mice" > > option "ZAxisMapping" "4 5" > > option "Buttons" "5" > > option "Emulate3Buttons" "false" > > EndSection > > > > now is the protocol IMPS/2 correct for a MS Intelliexplorer mouse (I copied > > it from the Logitech example) ? > > yes it is, but maybe you need to have additional CorePointer options. > Look at some XFree config howto's. > > > - also in the option "Device" the value specified as "/dev/input/mice" does > > it need to be /dev/input/uinput or something else ? > > No. The mice device is correct. > > > - does the mousedev module need to be loaded to make it work ? > > Yes. > > Regards > > Marcel > > > [-- Attachment #2: bthid-msmouse_howto.txt --] [-- Type: text/plain, Size: 5399 bytes --] Bthid MS Wireless IntelliExplorer mouse Howto ----------------------------------------------------------- CREDITS: Thanks to Marcel Holtmann,Charles Beuche and Peter Klausler Here is a list of steps required to make the MS IntelliExplorer wireless mouse work with the Linux kernel using the BLueZ stack and bthid program. 1. Download the latest kernel # wget http://www.kernel.org/pub/linux/kernel/v2.4/linux-2.4.22.tar.gz 2. Copy the file in the /usr/src folder # cp linux-2.4.22.tar /usr/src/ 3. change the directory # cd /usr/src/ 4. Unzip the file # tar xzf /root/linux-2.4.22.tar.gz 5. download the latest patches for linux-2.4.22 from http://www.holtmann.org/linux/kernel/ patch-2.4.22-mh2.gz 6. rename the kernel source directory to include the patch name (mh2 in this case) # mv linux-2.4.22 linux-2.4.22-mh2 7. cd linux-2.4.22-mh2 and Apply the patch # zcat patch-2.4.22-mh2.gz | patch -p1 make sure there were no errors while patching 8. Now to configure the kernel copy the old config file from previous kernel to current folder or start out afresh if you feel confident # cp ../linux-2.4.21-0.13mdk/.config . 9. make xconfig 10. Select the 'm' option for the "User level driver support" from the "Input Core support" Enable the BLuetooth support as loadable module 11. Save and Exit 12. # make dep 13. # make clean 14. # make bzImage (take a nap) 15. # make modules (take another nap, long one) 16. # make modules_install after this step ensure you have the following modules /lib/modules/2.4.22-mh2/kernel/net/bluetooth/bluez.o /lib/modules/2.4.22-mh2/kernel/net/bluetooth/l2cap.o /lib/modules/2.4.22-mh2/kernel/drivers/bluetooth/hci_usb.o /lib/modules/2.4.22-mh2/kernel/drivers/input/input.o /lib/modules/2.4.22-mh2/kernel/drivers/input/uinput.o /lib/modules/2.4.22-mh2/kernel/drivers/input/mousedev.o 17. copy the bzImage to the /boot directory # cp arch/i386/boot/bzImage /boot/bzImage_bluez_02Jan2004 18. backup the current System.map file # mv /boot/System.map /boot/System.map.old 19. copy current System.map file to /boot and rename it # cp System.map /boot/System.map-2.4.22-mh2 # cd /boot # rm System.map # ln -s System.map-2.4.22-mh2 System.map 20. create a softlink to new kernel # rm /usr/src/linux # ln -s linux-2.4.22-mh2/ linux 21 Make changes to /etc/lilo.conf and add the following section, dont copy the lines below blindly they might not work for you. image=/boot/bzImage_2ndJan2004 label="BlueZ-Jan7" root=/dev/hda3 vga=788 read-only 22. run # lilo to verify lilo has been updated 23. # reboot 24. install the latest BlueZ packages by updating the rpms # cd /home/bluetooth/rpms # rpm -Uhv bl*.rpm 25. download and compile the latest version of libs2 and utils2 from CVS # cd libs2 # ./bootstrap # ./configure --prefix=/opt/bluetooth # make && make install # cd utils2 # ./bootstrap # ./configure --prefix=/opt/bluetooth --with-bluetooth=/opt/bluetooth # make && make install 26. update the linker # echo /opt/bluetooth/lib >> /etc/ld.so.conf # ldconfig 27. load the following modules # insmod /lib/modules/2.4.22-mh2/kernel/net/bluetooth/bluez.o # insmod /lib/modules/2.4.22-mh2/kernel/net/bluetooth/l2cap.o # insmod /lib/modules/2.4.22-mh2/kernel/drivers/bluetooth/hci_usb.o # insmod /lib/modules/2.4.22-mh2/kernel/drivers/input/input.o # insmod /lib/modules/2.4.22-mh2/kernel/drivers/input/uinput.o # insmod /lib/modules/2.4.22-mh2/kernel/drivers/input/mousedev.o 28. bthid sends its events to the uinput device (/dev/misc/uinput or /dev/input/uinput), which might not exist on your system. Here is a small list of things you should check if you miss it : is your kernel compiled with the uinput module ? Check with # grep UINPUT /usr/src/linux/.config do you have the module loaded ? Check with # lsmod | grep uinput do you have the device ? Check with # ls /dev/misc/uinput /dev/input/uinput if you miss the device file, create it with # mknod /dev/misc/uinput c 10 223, or setup your /etc/devfsd.conf if you are a devfs user 29. make the following changes to the /etc/X11/XF86Config-4, but first back it up add Section "InputDevice" Identifier "MSMouse" Driver "mouse" Option "Protocol" "IMPS/2" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5" Option "Buttons" "5" Option "Emulate3Buttons" "false" EndSection and add InputDevice "MSMouse" "SendCoreEvents" to the Server Layout section 30. Restart the xserver (Ctrl + Alt + BkSpace works on most systems) 31. login as root 32. attach the bluetooth dongle to the host machine and fire it up # hciconfig hci0 up 33. run the hcid and bthid daemon # hcid # /opt/bluetooth/sbin/bthid -d 34. find the bluetooth address of the Microsoft mouse using # hcitool scan 35. finally connect to the mouse using # /opt/bluetooth/sbin/bthid -c <btaddress of ms mouse> also refer to the following http://www.holtmann.org/linux/kernel/debian.html http://www.bueche.ch/comp/mx900/mx900.html the README provided by Peter Klausler in his bthid program http://klausler.com/msbtkb-linux.html and also http://sourceforge.net/mailarchive/forum.php?thread_id=3615960&forum_id%20%20=1881%3E%20&forum_id=1881 ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Bluez-devel] Re: blueZ-bthid testing 2004-01-08 11:09 ` Deepesh S Gujarathi @ 2004-01-08 12:07 ` Charles Bueche 2004-01-10 9:09 ` [Bluez-devel] " Deepesh S Gujarathi 0 siblings, 1 reply; 9+ messages in thread From: Charles Bueche @ 2004-01-08 12:07 UTC (permalink / raw) To: Deepesh S Gujarathi; +Cc: Marcel Holtmann, BlueZ Mailing List Hi, looks OK to me. If you want, when you have a stable version, I can host it beside mine on my web server. Charles On Thu, 2004-01-08 at 12:09, Deepesh S Gujarathi wrote: > Hi all, > > Thanks to Marcel, finally the MS mouse is working effortlessly with the > bthid program and I am a happy man. > > I had messed up two things, > - had not loaded the mousedev.o module and > - made a typo in the XF86Config-4 file. > > my two cents > please find attached a howto document that details the steps involved in > making the MS IntelliExplorer mouse working with Marcel's bthid utility. > > PS: maybe some one can just verify the howto document for any possible > errors. > > thanks everyone for your patience. > Deepesh > > Deepesh S Gujarathi > Encodex Technologies (India) Pvt. Ltd. > 69 Amchi Colony, Bavdhan Khurd > Pune - 411021 > 91-20-2953590 , 2953591 > URL: www.encodexindia.com > > > > ----- Original Message ----- > From: "Marcel Holtmann" <marcel@holtmann.org> > To: "Deepesh S Gujarathi" <d_gujarathi@hotmail.com> > Cc: "BlueZ Mailing List" <bluez-devel@lists.sourceforge.net> > Sent: Wednesday, January 07, 2004 6:41 PM > Subject: Re: blueZ-bthid testing > > > > Hi Deepesh, > > > > > I created the uinput node with the following command > > > # mknod /dev/input/uinput c 10 223 > > > and the bthid error (bthid[2040]: can't open input device: no such file > or > > > directory (2)) is gone, but for some reason I still cant move the > cursor. > > > > > > - I checked the hcidump and it shows all the data coming from the MS > > > wireless mouse as I move the mouse and click > > > > > > - the tail -f /var/log/messages shows the following > > > Bluetooth HID service started > > > Connected: Microsoft Five Button Mouse > > > Vendor HID usage 0xff00fe01 value 0x1 > > > adequate battery > > > > > > - when I do an lsmod I see > > > Module Used by Not tainted > > > uinput 1 > > > hci_usb 1 > > > l2cap 5 > > > bluez 4 [hci_usb l2cap] > > > input 0 (autoclean) [uinput] > > > > > > I doubt the following, if anyone can verify it would be great > > > > > > - my XF86Config-4 file consists > > > > > > Section "InputDevice" > > > Identifier "MSmouse" > > > driver "mouse" > > > option "Protocol" "IMPS/2" > > > option "Device" "/dev/input/mice" > > > option "ZAxisMapping" "4 5" > > > option "Buttons" "5" > > > option "Emulate3Buttons" "false" > > > EndSection > > > > > > now is the protocol IMPS/2 correct for a MS Intelliexplorer mouse (I > copied > > > it from the Logitech example) ? > > > > yes it is, but maybe you need to have additional CorePointer options. > > Look at some XFree config howto's. > > > > > - also in the option "Device" the value specified as "/dev/input/mice" > does > > > it need to be /dev/input/uinput or something else ? > > > > No. The mice device is correct. > > > > > - does the mousedev module need to be loaded to make it work ? > > > > Yes. > > > > Regards > > > > Marcel > > > > > > -- Charles Bueche <charles@bueche.ch> sand, snow, wave, wind and net -surfer ^ permalink raw reply [flat|nested] 9+ messages in thread
* [Bluez-devel] Re:Re: blueZ-bthid testing 2004-01-08 12:07 ` [Bluez-devel] " Charles Bueche @ 2004-01-10 9:09 ` Deepesh S Gujarathi 2004-01-10 13:32 ` Charles Bueche 0 siblings, 1 reply; 9+ messages in thread From: Deepesh S Gujarathi @ 2004-01-10 9:09 UTC (permalink / raw) To: Charles Bueche; +Cc: BlueZ Mailing List Hi Charles, I don't mind you hosting the bthid-howto document on your website, afterall I prepared it learning from what you people had written. So you may go ahead and host it right away. thanks Deepesh S Gujarathi ----- Original Message ----- From: "Charles Bueche" <charles@bueche.ch> To: "Deepesh S Gujarathi" <d_gujarathi@hotmail.com> Cc: "Marcel Holtmann" <marcel@holtmann.org>; "BlueZ Mailing List" <bluez-devel@lists.sourceforge.net> Sent: Thursday, January 08, 2004 5:37 PM Subject: Re: [Bluez-devel] Re: blueZ-bthid testing > Hi, > > looks OK to me. If you want, when you have a stable version, I can host > it beside mine on my web server. > > Charles > > On Thu, 2004-01-08 at 12:09, Deepesh S Gujarathi wrote: > > Hi all, > > > > Thanks to Marcel, finally the MS mouse is working effortlessly with the > > bthid program and I am a happy man. > > > > I had messed up two things, > > - had not loaded the mousedev.o module and > > - made a typo in the XF86Config-4 file. > > > > my two cents > > please find attached a howto document that details the steps involved in > > making the MS IntelliExplorer mouse working with Marcel's bthid utility. > > > > PS: maybe some one can just verify the howto document for any possible > > errors. > > > > thanks everyone for your patience. > > Deepesh S Gujarathi ------------------------------------------------------- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Bluez-devel] Re:Re: blueZ-bthid testing 2004-01-10 9:09 ` [Bluez-devel] " Deepesh S Gujarathi @ 2004-01-10 13:32 ` Charles Bueche 0 siblings, 0 replies; 9+ messages in thread From: Charles Bueche @ 2004-01-10 13:32 UTC (permalink / raw) To: Deepesh S Gujarathi; +Cc: BlueZ Mailing List Hi again, done, the document is linked. It's good, as I have had a few questions about MS mice. Regs, Charles On Sat, 2004-01-10 at 10:09, Deepesh S Gujarathi wrote: > Hi Charles, > > I don't mind you hosting the bthid-howto document on your website, afterall > I prepared it learning from what you people had written. So you may go ahead > and host it right away. > > thanks > Deepesh S Gujarathi > > ----- Original Message ----- > From: "Charles Bueche" <charles@bueche.ch> > To: "Deepesh S Gujarathi" <d_gujarathi@hotmail.com> > Cc: "Marcel Holtmann" <marcel@holtmann.org>; "BlueZ Mailing List" > <bluez-devel@lists.sourceforge.net> > Sent: Thursday, January 08, 2004 5:37 PM > Subject: Re: [Bluez-devel] Re: blueZ-bthid testing > > > > Hi, > > > > looks OK to me. If you want, when you have a stable version, I can host > > it beside mine on my web server. > > > > Charles > > > > On Thu, 2004-01-08 at 12:09, Deepesh S Gujarathi wrote: > > > Hi all, > > > > > > Thanks to Marcel, finally the MS mouse is working effortlessly with the > > > bthid program and I am a happy man. > > > > > > I had messed up two things, > > > - had not loaded the mousedev.o module and > > > - made a typo in the XF86Config-4 file. > > > > > > my two cents > > > please find attached a howto document that details the steps involved in > > > making the MS IntelliExplorer mouse working with Marcel's bthid utility. > > > > > > PS: maybe some one can just verify the howto document for any possible > > > errors. > > > > > > thanks everyone for your patience. > > > Deepesh S Gujarathi > > > ------------------------------------------------------- > This SF.net email is sponsored by: Perforce Software. > Perforce is the Fast Software Configuration Management System offering > advanced branching capabilities and atomic changes on 50+ platforms. > Free Eval! http://www.perforce.com/perforce/loadprog.html > _______________________________________________ > Bluez-devel mailing list > Bluez-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/bluez-devel -- Charles Bueche <charles@bueche.ch> sand, snow, wave, wind and net -surfer ------------------------------------------------------- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2004-01-10 13:32 UTC | newest] Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- [not found] <LAW11-OE33GHeqXipAS00015cf1@hotmail.com> 2004-01-05 14:54 ` [Bluez-devel] Re: blueZ-bthid testing Marcel Holtmann 2004-01-06 13:03 ` Deepesh S Gujarathi 2004-01-06 13:16 ` [Bluez-devel] " Marcel Holtmann 2004-01-07 12:56 ` Deepesh S Gujarathi 2004-01-07 13:11 ` [Bluez-devel] " Marcel Holtmann 2004-01-08 11:09 ` Deepesh S Gujarathi 2004-01-08 12:07 ` [Bluez-devel] " Charles Bueche 2004-01-10 9:09 ` [Bluez-devel] " Deepesh S Gujarathi 2004-01-10 13:32 ` Charles Bueche
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.