* [Bluez-users] hcid not working - bluez 3.9
@ 2007-03-30 5:46 Sumeet Verma
2007-03-31 13:46 ` Marcel Holtmann
0 siblings, 1 reply; 5+ messages in thread
From: Sumeet Verma @ 2007-03-30 5:46 UTC (permalink / raw)
To: bluez-users
Hi
I have been trying to bring up bluez-utils-3.9 and hcid is not working. It
says
[root@dlhl0330 tools]# hcid -n
hcid[29560]: Bluetooth HCI daemon
hcid[29560]: Can't connect to system message bus: Failed to connect to
socket /usr/local/var/run/dbus/system_bus_socket: No such file or directory
hcid[29560]: Unable to get on D-Bus
I have looked into the mailing list and followed the mentioned procedure. I
have installed dbus-0.61 and started the system bus by calling dbus-launch
[root@dlhl0330 dbus]# dbus-launch
DBUS_SESSION_BUS_ADDRESS='unix:abstract=/tmp/dbus-
BcAG8pbfI2,guid=adea0b46b6c8607cd9bc4162ffe90200';
DBUS_SESSION_BUS_PID=29606;
[root@dlhl0330 dbus]#
I can see the dbus-daemon running when is do ps -e
system_bus_socket is present at the location /var/run/dbus/system_bus_socket
Is there any way I can configure hcid to take the system_bus_socket
from /var/run/dbus instead of /usr/local/var/run/dbus
Please suggest.
Sumeet
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [Bluez-users] hcid not working - bluez 3.9
2007-03-30 5:46 [Bluez-users] hcid not working - bluez 3.9 Sumeet Verma
@ 2007-03-31 13:46 ` Marcel Holtmann
2007-04-02 6:23 ` Sumeet VERMA
0 siblings, 1 reply; 5+ messages in thread
From: Marcel Holtmann @ 2007-03-31 13:46 UTC (permalink / raw)
To: BlueZ users
Hi Sumeet,
> I have been trying to bring up bluez-utils-3.9 and hcid is not working. It
> says
>
> [root@dlhl0330 tools]# hcid -n
> hcid[29560]: Bluetooth HCI daemon
> hcid[29560]: Can't connect to system message bus: Failed to connect to
> socket /usr/local/var/run/dbus/system_bus_socket: No such file or directory
> hcid[29560]: Unable to get on D-Bus
>
> I have looked into the mailing list and followed the mentioned procedure. I
> have installed dbus-0.61 and started the system bus by calling dbus-launch
>
> [root@dlhl0330 dbus]# dbus-launch
> DBUS_SESSION_BUS_ADDRESS='unix:abstract=/tmp/dbus-
> BcAG8pbfI2,guid=adea0b46b6c8607cd9bc4162ffe90200';
> DBUS_SESSION_BUS_PID=29606;
> [root@dlhl0330 dbus]#
>
> I can see the dbus-daemon running when is do ps -e
>
> system_bus_socket is present at the location /var/run/dbus/system_bus_socket
> Is there any way I can configure hcid to take the system_bus_socket
> from /var/run/dbus instead of /usr/local/var/run/dbus
the session bus is not the same as the system bus. You need a running
system bus for hcid. And normally your distribution ensures that it is
setup correctly.
Regards
Marcel
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [Bluez-users] hcid not working - bluez 3.9
2007-03-31 13:46 ` Marcel Holtmann
@ 2007-04-02 6:23 ` Sumeet VERMA
2007-04-02 12:14 ` Claudio Takahasi
0 siblings, 1 reply; 5+ messages in thread
From: Sumeet VERMA @ 2007-04-02 6:23 UTC (permalink / raw)
To: 'BlueZ users'
Hi Marcel,
How would I know that the system bus is up and running? Basically I think
the problem is the socket system_bus_socket is created in /var/run/dbus
instead of /usr/local/var/run/dbus.
I tried to configure the dbus-0.61 package with the following string
./configure --prefix=/usr/local --disable-gtk --disable-selinux
--with-session-socket-dir=/usr/local/var/run/dbus
--with-dbus-user=messagebus --with-test-socket-dir=/usr/local/var/run/dbus
But still it doesn't work.
Any pointers?
Regards,
Sumeet
-----Original Message-----
From: bluez-users-bounces@lists.sourceforge.net
[mailto:bluez-users-bounces@lists.sourceforge.net] On Behalf Of Marcel
Holtmann
Sent: Saturday, March 31, 2007 7:16 PM
To: BlueZ users
Subject: Re: [Bluez-users] hcid not working - bluez 3.9
Hi Sumeet,
> I have been trying to bring up bluez-utils-3.9 and hcid is not
> working. It says
>
> [root@dlhl0330 tools]# hcid -n
> hcid[29560]: Bluetooth HCI daemon
> hcid[29560]: Can't connect to system message bus: Failed to connect to
> socket /usr/local/var/run/dbus/system_bus_socket: No such file or
> directory
> hcid[29560]: Unable to get on D-Bus
>
> I have looked into the mailing list and followed the mentioned
> procedure. I have installed dbus-0.61 and started the system bus by
> calling dbus-launch
>
> [root@dlhl0330 dbus]# dbus-launch
> DBUS_SESSION_BUS_ADDRESS='unix:abstract=/tmp/dbus-
> BcAG8pbfI2,guid=adea0b46b6c8607cd9bc4162ffe90200';
> DBUS_SESSION_BUS_PID=29606;
> [root@dlhl0330 dbus]#
>
> I can see the dbus-daemon running when is do ps -e
>
> system_bus_socket is present at the location
> /var/run/dbus/system_bus_socket Is there any way I can configure hcid
> to take the system_bus_socket from /var/run/dbus instead of
> /usr/local/var/run/dbus
the session bus is not the same as the system bus. You need a running system
bus for hcid. And normally your distribution ensures that it is setup
correctly.
Regards
Marcel
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's
Techsay panel and you'll get the chance to share your opinions on IT &
business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [Bluez-users] hcid not working - bluez 3.9
2007-04-02 6:23 ` Sumeet VERMA
@ 2007-04-02 12:14 ` Claudio Takahasi
2007-04-09 8:23 ` Sumeet VERMA
0 siblings, 1 reply; 5+ messages in thread
From: Claudio Takahasi @ 2007-04-02 12:14 UTC (permalink / raw)
To: BlueZ users
On 4/2/07, Sumeet VERMA <sumeet.verma@st.com> wrote:
> Hi Marcel,
> How would I know that the system bus is up and running? Basically I think
> the problem is the socket system_bus_socket is created in /var/run/dbus
> instead of /usr/local/var/run/dbus.
>
> I tried to configure the dbus-0.61 package with the following string
>
> ./configure --prefix=/usr/local --disable-gtk --disable-selinux
> --with-session-socket-dir=/usr/local/var/run/dbus
> --with-dbus-user=messagebus --with-test-socket-dir=/usr/local/var/run/dbus
> But still it doesn't work.
>
> Any pointers?
>
> Regards,
>
> Sumeet
Hi Sumeet,
Here are my message BUS processes running:
1001 4725 1 0 08:36 ? 00:00:00 /usr/bin/dbus-daemon
--fork --print-pid 8 --print-address 6 --session
104 6791 1 0 09:07 ? 00:00:00 /usr/bin/dbus-daemon --system
Check the following lock file in order to verify if the system BUS is running:
/var/run/dbus/pid
Remove this file if the system message BUS is not running and execute
"dbus-daemon --system"
BR,
Claudio.
--
---------------------------------------------------------
Claudio Takahasi
Instituto Nokia de Tecnologia - INdT
> -----Original Message-----
> From: bluez-users-bounces@lists.sourceforge.net
> [mailto:bluez-users-bounces@lists.sourceforge.net] On Behalf Of Marcel
> Holtmann
> Sent: Saturday, March 31, 2007 7:16 PM
> To: BlueZ users
> Subject: Re: [Bluez-users] hcid not working - bluez 3.9
>
> Hi Sumeet,
>
> > I have been trying to bring up bluez-utils-3.9 and hcid is not
> > working. It says
> >
> > [root@dlhl0330 tools]# hcid -n
> > hcid[29560]: Bluetooth HCI daemon
> > hcid[29560]: Can't connect to system message bus: Failed to connect to
> > socket /usr/local/var/run/dbus/system_bus_socket: No such file or
> > directory
> > hcid[29560]: Unable to get on D-Bus
> >
> > I have looked into the mailing list and followed the mentioned
> > procedure. I have installed dbus-0.61 and started the system bus by
> > calling dbus-launch
> >
> > [root@dlhl0330 dbus]# dbus-launch
> > DBUS_SESSION_BUS_ADDRESS='unix:abstract=/tmp/dbus-
> > BcAG8pbfI2,guid=adea0b46b6c8607cd9bc4162ffe90200';
> > DBUS_SESSION_BUS_PID=29606;
> > [root@dlhl0330 dbus]#
> >
> > I can see the dbus-daemon running when is do ps -e
> >
> > system_bus_socket is present at the location
> > /var/run/dbus/system_bus_socket Is there any way I can configure hcid
> > to take the system_bus_socket from /var/run/dbus instead of
> > /usr/local/var/run/dbus
>
> the session bus is not the same as the system bus. You need a running system
> bus for hcid. And normally your distribution ensures that it is setup
> correctly.
>
> Regards
>
> Marcel
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [Bluez-users] hcid not working - bluez 3.9
2007-04-02 12:14 ` Claudio Takahasi
@ 2007-04-09 8:23 ` Sumeet VERMA
0 siblings, 0 replies; 5+ messages in thread
From: Sumeet VERMA @ 2007-04-09 8:23 UTC (permalink / raw)
To: 'BlueZ users'
Hi Claudio
I have already done that. I remove the file
/usr/local/var/run/messagebus.pid and run dbus-daemon --system
The dbus-daemon is also started in the background.
The problem is system_bus_socket is present in /var/run/dbus and not created
in /usr/local/var/run/dbus
Is it possible to configure hcid so that it takes the system_bus_socket from
/var/run/dbus
One more question:- There is a default version of dbus installed (0.22).
system_bus_socket is also present at /var/run/dbus (I think it is created by
the default version of dbus). When I install dbus-0.61, there is no
system_bus_socket created in /usr/local/var/run/dbus. How do I overcome this
problem?
My distribution is Red Hat Linux Kernelversion - 2.6.9-42
BR,
Sumeet
-----Original Message-----
From: bluez-users-bounces@lists.sourceforge.net
[mailto:bluez-users-bounces@lists.sourceforge.net] On Behalf Of Claudio
Takahasi
Sent: Monday, April 02, 2007 5:45 PM
To: BlueZ users
Subject: Re: [Bluez-users] hcid not working - bluez 3.9
On 4/2/07, Sumeet VERMA <sumeet.verma@st.com> wrote:
> Hi Marcel,
> How would I know that the system bus is up and running? Basically I
> think the problem is the socket system_bus_socket is created in
> /var/run/dbus instead of /usr/local/var/run/dbus.
>
> I tried to configure the dbus-0.61 package with the following string
>
> ./configure --prefix=/usr/local --disable-gtk --disable-selinux
> --with-session-socket-dir=/usr/local/var/run/dbus
> --with-dbus-user=messagebus
> --with-test-socket-dir=/usr/local/var/run/dbus
> But still it doesn't work.
>
> Any pointers?
>
> Regards,
>
> Sumeet
Hi Sumeet,
Here are my message BUS processes running:
1001 4725 1 0 08:36 ? 00:00:00 /usr/bin/dbus-daemon
--fork --print-pid 8 --print-address 6 --session
104 6791 1 0 09:07 ? 00:00:00 /usr/bin/dbus-daemon
--system
Check the following lock file in order to verify if the system BUS is
running:
/var/run/dbus/pid
Remove this file if the system message BUS is not running and execute
"dbus-daemon --system"
BR,
Claudio.
--
---------------------------------------------------------
Claudio Takahasi
Instituto Nokia de Tecnologia - INdT
> -----Original Message-----
> From: bluez-users-bounces@lists.sourceforge.net
> [mailto:bluez-users-bounces@lists.sourceforge.net] On Behalf Of Marcel
> Holtmann
> Sent: Saturday, March 31, 2007 7:16 PM
> To: BlueZ users
> Subject: Re: [Bluez-users] hcid not working - bluez 3.9
>
> Hi Sumeet,
>
> > I have been trying to bring up bluez-utils-3.9 and hcid is not
> > working. It says
> >
> > [root@dlhl0330 tools]# hcid -n
> > hcid[29560]: Bluetooth HCI daemon
> > hcid[29560]: Can't connect to system message bus: Failed to connect to
> > socket /usr/local/var/run/dbus/system_bus_socket: No such file or
> > directory
> > hcid[29560]: Unable to get on D-Bus
> >
> > I have looked into the mailing list and followed the mentioned
> > procedure. I have installed dbus-0.61 and started the system bus by
> > calling dbus-launch
> >
> > [root@dlhl0330 dbus]# dbus-launch
> > DBUS_SESSION_BUS_ADDRESS='unix:abstract=/tmp/dbus-
> > BcAG8pbfI2,guid=adea0b46b6c8607cd9bc4162ffe90200';
> > DBUS_SESSION_BUS_PID=29606;
> > [root@dlhl0330 dbus]#
> >
> > I can see the dbus-daemon running when is do ps -e
> >
> > system_bus_socket is present at the location
> > /var/run/dbus/system_bus_socket Is there any way I can configure hcid
> > to take the system_bus_socket from /var/run/dbus instead of
> > /usr/local/var/run/dbus
>
> the session bus is not the same as the system bus. You need a running
system
> bus for hcid. And normally your distribution ensures that it is setup
> correctly.
>
> Regards
>
> Marcel
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2007-04-09 8:23 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2007-03-30 5:46 [Bluez-users] hcid not working - bluez 3.9 Sumeet Verma
2007-03-31 13:46 ` Marcel Holtmann
2007-04-02 6:23 ` Sumeet VERMA
2007-04-02 12:14 ` Claudio Takahasi
2007-04-09 8:23 ` Sumeet VERMA
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.