* acpi on sony vaio vgn-sz61mn
@ 2009-06-17 13:43 Sebastian Pohl
2009-06-18 0:58 ` Zhang Rui
2009-06-18 2:16 ` Mattia Dongili
0 siblings, 2 replies; 14+ messages in thread
From: Sebastian Pohl @ 2009-06-17 13:43 UTC (permalink / raw)
To: linux-acpi
Hello everyone!
Thank you to everyone working on the sony stuff! It made my laptop a
much more valuable companion!
But there are still some flaws that are left. I am writing to get an
advise what to do with them. Should i post them to bugtrackter or
something else?
Ok, the problems are:
- The special button s2 generates the same acpi event as the stamina switch
- The lidswitch does not generate any acpi events
- The Power does not generate any acpi events
Please tell me what i can do and how i can help solve these problems.
If i am totaly wrong here please say...
regards
sebastian
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: acpi on sony vaio vgn-sz61mn 2009-06-17 13:43 acpi on sony vaio vgn-sz61mn Sebastian Pohl @ 2009-06-18 0:58 ` Zhang Rui 2009-06-23 8:30 ` Sebastian Pohl 2009-06-18 2:16 ` Mattia Dongili 1 sibling, 1 reply; 14+ messages in thread From: Zhang Rui @ 2009-06-18 0:58 UTC (permalink / raw) To: Sebastian Pohl; +Cc: linux-acpi On Wed, 2009-06-17 at 21:43 +0800, Sebastian Pohl wrote: > Hello everyone! > > Thank you to everyone working on the sony stuff! It made my laptop a > much more valuable companion! > > But there are still some flaws that are left. I am writing to get an > advise what to do with them. > > Ok, the problems are: > > - The special button s2 generates the same acpi event as the stamina switch > - The lidswitch does not generate any acpi events > - The Power does not generate any acpi events > please kill acpid, and run "cat /proc/acpi/event", what do you get when pressing each of the three buttons? run "cat /proc/interrupts" both before and after pressing these buttons, does the number of ACPI or sony interrupts increase? If ACPI interrupts increases, please run "grep . /sys/firmware/acpi/interrupts/*" and tell us which GPE/Fixed event is fired. > Should i post them to bugtrackter or > something else? > please file a new bug report at http://bugzilla.kernel.org/enter_bug.cgi?product=ACPI and attach all the request info there. please also attach the acpidump output. thanks, rui -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: acpi on sony vaio vgn-sz61mn 2009-06-18 0:58 ` Zhang Rui @ 2009-06-23 8:30 ` Sebastian Pohl 2009-06-23 8:44 ` Zhang Rui 0 siblings, 1 reply; 14+ messages in thread From: Sebastian Pohl @ 2009-06-23 8:30 UTC (permalink / raw) To: Zhang Rui; +Cc: linux-acpi Hi! Zhang Rui wrote: > On Wed, 2009-06-17 at 21:43 +0800, Sebastian Pohl wrote: > >> Hello everyone! >> >> Thank you to everyone working on the sony stuff! It made my laptop a >> much more valuable companion! >> >> But there are still some flaws that are left. I am writing to get an >> advise what to do with them. >> > > > >> Ok, the problems are: >> >> - The special button s2 generates the same acpi event as the stamina switch >> - The lidswitch does not generate any acpi events >> - The Power does not generate any acpi events >> >> > please kill acpid, and run "cat /proc/acpi/event", what do you get when > pressing each of the three buttons? > Both, the s2 Button and the stamina switch generate the following sony/hotkey SPIC 00000001 00000021 > run "cat /proc/interrupts" both before and after pressing these buttons, > does the number of ACPI or sony interrupts increase? > If ACPI interrupts increases, please run > "grep . /sys/firmware/acpi/interrupts/*" and tell us which GPE/Fixed > event is fired. > > Only the stamina switch and the s2 button increase any interrupts but only sony interrupts are generated. > > >> Should i post them to bugtrackter or >> something else? >> >> > please file a new bug report at > http://bugzilla.kernel.org/enter_bug.cgi?product=ACPI > and attach all the request info there. > please also attach the acpidump output. > > thanks, > rui > > thank you! regards sebastian -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: acpi on sony vaio vgn-sz61mn 2009-06-23 8:30 ` Sebastian Pohl @ 2009-06-23 8:44 ` Zhang Rui 2009-06-23 8:45 ` Sebastian Pohl 0 siblings, 1 reply; 14+ messages in thread From: Zhang Rui @ 2009-06-23 8:44 UTC (permalink / raw) To: Sebastian Pohl; +Cc: linux-acpi, Mattia Dongili On Tue, 2009-06-23 at 16:30 +0800, Sebastian Pohl wrote: > Hi! > > Zhang Rui wrote: > > On Wed, 2009-06-17 at 21:43 +0800, Sebastian Pohl wrote: > > > >> Hello everyone! > >> > >> Thank you to everyone working on the sony stuff! It made my laptop a > >> much more valuable companion! > >> > >> But there are still some flaws that are left. I am writing to get an > >> advise what to do with them. > >> > > > > > > > >> Ok, the problems are: > >> > >> - The special button s2 generates the same acpi event as the stamina switch > >> - The lidswitch does not generate any acpi events > >> - The Power does not generate any acpi events > >> > >> > > please kill acpid, and run "cat /proc/acpi/event", what do you get when > > pressing each of the three buttons? > > > Both, the s2 Button and the stamina switch generate the following > so Q1 and Q2 are sony platform driver problems. what do you get when pressing the power button? thanks, rui > sony/hotkey SPIC 00000001 00000021 > > run "cat /proc/interrupts" both before and after pressing these buttons, > > does the number of ACPI or sony interrupts increase? > > If ACPI interrupts increases, please run > > "grep . /sys/firmware/acpi/interrupts/*" and tell us which GPE/Fixed > > event is fired. > > > > > Only the stamina switch and the s2 button increase any interrupts but > only sony interrupts are generated. > > > > > >> Should i post them to bugtrackter or > >> something else? > >> > >> > > please file a new bug report at > > http://bugzilla.kernel.org/enter_bug.cgi?product=ACPI > > and attach all the request info there. > > please also attach the acpidump output. > > > > thanks, > > rui > > > > > > thank you! > > regards > > sebastian -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: acpi on sony vaio vgn-sz61mn 2009-06-23 8:44 ` Zhang Rui @ 2009-06-23 8:45 ` Sebastian Pohl 2009-06-23 8:48 ` Zhang Rui 0 siblings, 1 reply; 14+ messages in thread From: Sebastian Pohl @ 2009-06-23 8:45 UTC (permalink / raw) To: Zhang Rui; +Cc: linux-acpi, Mattia Dongili Zhang Rui wrote: > On Tue, 2009-06-23 at 16:30 +0800, Sebastian Pohl wrote: > >> Hi! >> >> Zhang Rui wrote: >> >>> On Wed, 2009-06-17 at 21:43 +0800, Sebastian Pohl wrote: >>> >>> >>>> Hello everyone! >>>> >>>> Thank you to everyone working on the sony stuff! It made my laptop a >>>> much more valuable companion! >>>> >>>> But there are still some flaws that are left. I am writing to get an >>>> advise what to do with them. >>>> >>>> >>> >>> >>>> Ok, the problems are: >>>> >>>> - The special button s2 generates the same acpi event as the stamina switch >>>> - The lidswitch does not generate any acpi events >>>> - The Power does not generate any acpi events >>>> >>>> >>>> >>> please kill acpid, and run "cat /proc/acpi/event", what do you get when >>> pressing each of the three buttons? >>> >>> >> Both, the s2 Button and the stamina switch generate the following >> >> > so Q1 and Q2 are sony platform driver problems. > what do you get when pressing the power button? > > thanks, > rui > When presing the power button nothing happens. No acpi output, no interrupts, nothing. Same with the lid-switch. regards sebastian >> sony/hotkey SPIC 00000001 00000021 >> >>> run "cat /proc/interrupts" both before and after pressing these buttons, >>> does the number of ACPI or sony interrupts increase? >>> If ACPI interrupts increases, please run >>> "grep . /sys/firmware/acpi/interrupts/*" and tell us which GPE/Fixed >>> event is fired. >>> >>> >>> >> Only the stamina switch and the s2 button increase any interrupts but >> only sony interrupts are generated. >> >>> >>> >>> >>>> Should i post them to bugtrackter or >>>> something else? >>>> >>>> >>>> >>> please file a new bug report at >>> http://bugzilla.kernel.org/enter_bug.cgi?product=ACPI >>> and attach all the request info there. >>> please also attach the acpidump output. >>> >>> thanks, >>> rui >>> >>> >>> >> thank you! >> >> regards >> >> sebastian >> > > -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: acpi on sony vaio vgn-sz61mn 2009-06-23 8:45 ` Sebastian Pohl @ 2009-06-23 8:48 ` Zhang Rui 2009-06-23 9:14 ` Sebastian Pohl 0 siblings, 1 reply; 14+ messages in thread From: Zhang Rui @ 2009-06-23 8:48 UTC (permalink / raw) To: Sebastian Pohl; +Cc: linux-acpi, Mattia Dongili On Tue, 2009-06-23 at 16:45 +0800, Sebastian Pohl wrote: > Zhang Rui wrote: > > On Tue, 2009-06-23 at 16:30 +0800, Sebastian Pohl wrote: > > > >> Hi! > >> > >> Zhang Rui wrote: > >> > >>> On Wed, 2009-06-17 at 21:43 +0800, Sebastian Pohl wrote: > >>> > >>> > >>>> Hello everyone! > >>>> > >>>> Thank you to everyone working on the sony stuff! It made my laptop a > >>>> much more valuable companion! > >>>> > >>>> But there are still some flaws that are left. I am writing to get an > >>>> advise what to do with them. > >>>> > >>>> > >>> > >>> > >>>> Ok, the problems are: > >>>> > >>>> - The special button s2 generates the same acpi event as the stamina switch > >>>> - The lidswitch does not generate any acpi events > >>>> - The Power does not generate any acpi events > >>>> > >>>> > >>>> > >>> please kill acpid, and run "cat /proc/acpi/event", what do you get when > >>> pressing each of the three buttons? > >>> > >>> > >> Both, the s2 Button and the stamina switch generate the following > >> > >> > > so Q1 and Q2 are sony platform driver problems. > > what do you get when pressing the power button? > > > > thanks, > > rui > > > > When presing the power button nothing happens. No acpi output, no > interrupts, nothing. Same with the lid-switch. > even no ACPI interrupts? please attach the output of grep . /sys/firmware/acpi/interrupts/* both before and after pressing these buttons for a couple of times. thanks, rui > regards > > sebastian > > >> sony/hotkey SPIC 00000001 00000021 > >> > >>> run "cat /proc/interrupts" both before and after pressing these buttons, > >>> does the number of ACPI or sony interrupts increase? > >>> If ACPI interrupts increases, please run > >>> "grep . /sys/firmware/acpi/interrupts/*" and tell us which GPE/Fixed > >>> event is fired. > >>> > >>> > >>> > >> Only the stamina switch and the s2 button increase any interrupts but > >> only sony interrupts are generated. > >> > >>> > >>> > >>> > >>>> Should i post them to bugtrackter or > >>>> something else? > >>>> > >>>> > >>>> > >>> please file a new bug report at > >>> http://bugzilla.kernel.org/enter_bug.cgi?product=ACPI > >>> and attach all the request info there. > >>> please also attach the acpidump output. > >>> > >>> thanks, > >>> rui > >>> > >>> > >>> > >> thank you! > >> > >> regards > >> > >> sebastian > >> > > > > > -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: acpi on sony vaio vgn-sz61mn 2009-06-23 8:48 ` Zhang Rui @ 2009-06-23 9:14 ` Sebastian Pohl 2009-06-23 9:23 ` Zhang, Rui 0 siblings, 1 reply; 14+ messages in thread From: Sebastian Pohl @ 2009-06-23 9:14 UTC (permalink / raw) To: Zhang Rui; +Cc: linux-acpi, Mattia Dongili Zhang Rui wrote: > On Tue, 2009-06-23 at 16:45 +0800, Sebastian Pohl wrote: > >> Zhang Rui wrote: >> >>> On Tue, 2009-06-23 at 16:30 +0800, Sebastian Pohl wrote: >>> >>> >>>> Hi! >>>> >>>> Zhang Rui wrote: >>>> >>>> >>>>> On Wed, 2009-06-17 at 21:43 +0800, Sebastian Pohl wrote: >>>>> >>>>> >>>>> >>>>>> Hello everyone! >>>>>> >>>>>> Thank you to everyone working on the sony stuff! It made my laptop a >>>>>> much more valuable companion! >>>>>> >>>>>> But there are still some flaws that are left. I am writing to get an >>>>>> advise what to do with them. >>>>>> >>>>>> >>>>>> >>>>> >>>>> >>>>> >>>>>> Ok, the problems are: >>>>>> >>>>>> - The special button s2 generates the same acpi event as the stamina switch >>>>>> - The lidswitch does not generate any acpi events >>>>>> - The Power does not generate any acpi events >>>>>> >>>>>> >>>>>> >>>>>> >>>>> please kill acpid, and run "cat /proc/acpi/event", what do you get when >>>>> pressing each of the three buttons? >>>>> >>>>> >>>>> >>>> Both, the s2 Button and the stamina switch generate the following >>>> >>>> >>>> >>> so Q1 and Q2 are sony platform driver problems. >>> what do you get when pressing the power button? >>> >>> thanks, >>> rui >>> >>> >> When presing the power button nothing happens. No acpi output, no >> interrupts, nothing. Same with the lid-switch. >> >> > > even no ACPI interrupts? > please attach the output of grep . /sys/firmware/acpi/interrupts/* > both before and after pressing these buttons for a couple of times. > > thanks, > rui > > Hi, this is before: /sys/firmware/acpi/interrupts/error: 0 /sys/firmware/acpi/interrupts/ff_gbl_lock: 0 enabled /sys/firmware/acpi/interrupts/ff_pmtimer: 0 invalid /sys/firmware/acpi/interrupts/ff_pwr_btn: 0 invalid /sys/firmware/acpi/interrupts/ff_rt_clk: 0 disabled /sys/firmware/acpi/interrupts/ff_slp_btn: 0 invalid /sys/firmware/acpi/interrupts/gpe00: 0 invalid /sys/firmware/acpi/interrupts/gpe01: 0 enabled /sys/firmware/acpi/interrupts/gpe02: 0 enabled /sys/firmware/acpi/interrupts/gpe03: 0 disabled /sys/firmware/acpi/interrupts/gpe04: 0 disabled /sys/firmware/acpi/interrupts/gpe05: 0 disabled /sys/firmware/acpi/interrupts/gpe06: 0 enabled /sys/firmware/acpi/interrupts/gpe07: 0 enabled /sys/firmware/acpi/interrupts/gpe08: 0 invalid /sys/firmware/acpi/interrupts/gpe09: 0 disabled /sys/firmware/acpi/interrupts/gpe0A: 0 invalid /sys/firmware/acpi/interrupts/gpe0B: 0 enabled /sys/firmware/acpi/interrupts/gpe0C: 0 disabled /sys/firmware/acpi/interrupts/gpe0D: 0 disabled /sys/firmware/acpi/interrupts/gpe0E: 0 disabled /sys/firmware/acpi/interrupts/gpe0F: 0 invalid /sys/firmware/acpi/interrupts/gpe10: 0 invalid /sys/firmware/acpi/interrupts/gpe11: 0 invalid /sys/firmware/acpi/interrupts/gpe12: 0 invalid /sys/firmware/acpi/interrupts/gpe13: 0 invalid /sys/firmware/acpi/interrupts/gpe14: 0 invalid /sys/firmware/acpi/interrupts/gpe15: 0 invalid /sys/firmware/acpi/interrupts/gpe16: 0 invalid /sys/firmware/acpi/interrupts/gpe17: 0 enabled /sys/firmware/acpi/interrupts/gpe18: 0 enabled /sys/firmware/acpi/interrupts/gpe19: 0 invalid /sys/firmware/acpi/interrupts/gpe1A: 0 invalid /sys/firmware/acpi/interrupts/gpe1B: 0 invalid /sys/firmware/acpi/interrupts/gpe1C: 0 invalid /sys/firmware/acpi/interrupts/gpe1D: 0 invalid /sys/firmware/acpi/interrupts/gpe1E: 0 invalid /sys/firmware/acpi/interrupts/gpe1F: 0 invalid /sys/firmware/acpi/interrupts/gpe_all: 0 /sys/firmware/acpi/interrupts/sci: 0 and after 10 times pressing the power button and opening/closing the lid: /sys/firmware/acpi/interrupts/error: 0 /sys/firmware/acpi/interrupts/ff_gbl_lock: 0 enabled /sys/firmware/acpi/interrupts/ff_pmtimer: 0 invalid /sys/firmware/acpi/interrupts/ff_pwr_btn: 0 invalid /sys/firmware/acpi/interrupts/ff_rt_clk: 0 disabled /sys/firmware/acpi/interrupts/ff_slp_btn: 0 invalid /sys/firmware/acpi/interrupts/gpe00: 0 invalid /sys/firmware/acpi/interrupts/gpe01: 0 enabled /sys/firmware/acpi/interrupts/gpe02: 0 enabled /sys/firmware/acpi/interrupts/gpe03: 0 disabled /sys/firmware/acpi/interrupts/gpe04: 0 disabled /sys/firmware/acpi/interrupts/gpe05: 0 disabled /sys/firmware/acpi/interrupts/gpe06: 0 enabled /sys/firmware/acpi/interrupts/gpe07: 0 enabled /sys/firmware/acpi/interrupts/gpe08: 0 invalid /sys/firmware/acpi/interrupts/gpe09: 0 disabled /sys/firmware/acpi/interrupts/gpe0A: 0 invalid /sys/firmware/acpi/interrupts/gpe0B: 0 enabled /sys/firmware/acpi/interrupts/gpe0C: 0 disabled /sys/firmware/acpi/interrupts/gpe0D: 0 disabled /sys/firmware/acpi/interrupts/gpe0E: 0 disabled /sys/firmware/acpi/interrupts/gpe0F: 0 invalid /sys/firmware/acpi/interrupts/gpe10: 0 invalid /sys/firmware/acpi/interrupts/gpe11: 0 invalid /sys/firmware/acpi/interrupts/gpe12: 0 invalid /sys/firmware/acpi/interrupts/gpe13: 0 invalid /sys/firmware/acpi/interrupts/gpe14: 0 invalid /sys/firmware/acpi/interrupts/gpe15: 0 invalid /sys/firmware/acpi/interrupts/gpe16: 0 invalid /sys/firmware/acpi/interrupts/gpe17: 0 enabled /sys/firmware/acpi/interrupts/gpe18: 0 enabled /sys/firmware/acpi/interrupts/gpe19: 0 invalid /sys/firmware/acpi/interrupts/gpe1A: 0 invalid /sys/firmware/acpi/interrupts/gpe1B: 0 invalid /sys/firmware/acpi/interrupts/gpe1C: 0 invalid /sys/firmware/acpi/interrupts/gpe1D: 0 invalid /sys/firmware/acpi/interrupts/gpe1E: 0 invalid /sys/firmware/acpi/interrupts/gpe1F: 0 invalid /sys/firmware/acpi/interrupts/gpe_all: 0 /sys/firmware/acpi/interrupts/sci: 0 I cant see any difference... regards sebastian >> regards >> >> sebastian >> >> >>>> sony/hotkey SPIC 00000001 00000021 >>>> >>>> >>>>> run "cat /proc/interrupts" both before and after pressing these buttons, >>>>> does the number of ACPI or sony interrupts increase? >>>>> If ACPI interrupts increases, please run >>>>> "grep . /sys/firmware/acpi/interrupts/*" and tell us which GPE/Fixed >>>>> event is fired. >>>>> >>>>> >>>>> >>>>> >>>> Only the stamina switch and the s2 button increase any interrupts but >>>> only sony interrupts are generated. >>>> >>>> >>>>> >>>>> >>>>> >>>>> >>>>>> Should i post them to bugtrackter or >>>>>> something else? >>>>>> >>>>>> >>>>>> >>>>>> >>>>> please file a new bug report at >>>>> http://bugzilla.kernel.org/enter_bug.cgi?product=ACPI >>>>> and attach all the request info there. >>>>> please also attach the acpidump output. >>>>> >>>>> thanks, >>>>> rui >>>>> >>>>> >>>>> >>>>> >>>> thank you! >>>> >>>> regards >>>> >>>> sebastian >>>> >>>> >>> >>> > > -- > To unsubscribe from this list: send the line "unsubscribe linux-acpi" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 14+ messages in thread
* RE: acpi on sony vaio vgn-sz61mn 2009-06-23 9:14 ` Sebastian Pohl @ 2009-06-23 9:23 ` Zhang, Rui 2009-06-23 9:33 ` Sebastian Pohl 0 siblings, 1 reply; 14+ messages in thread From: Zhang, Rui @ 2009-06-23 9:23 UTC (permalink / raw) To: Sebastian Pohl; +Cc: linux-acpi, Mattia Dongili >-----Original Message----- >From: Sebastian Pohl [mailto:sebastianp@uni-koblenz.de] >Sent: Tuesday, June 23, 2009 5:14 PM >To: Zhang, Rui >Cc: linux-acpi@vger.kernel.org; Mattia Dongili >Subject: Re: acpi on sony vaio vgn-sz61mn >> >> >Hi, > >this is before: > >/sys/firmware/acpi/interrupts/error: 0 >/sys/firmware/acpi/interrupts/ff_gbl_lock: 0 enabled >/sys/firmware/acpi/interrupts/ff_pmtimer: 0 invalid >/sys/firmware/acpi/interrupts/ff_pwr_btn: 0 invalid [Rui] power button fixed event is invalid? Please make sure CONFIG_ACPI_BUTTON=m/y Thanks, rui >/sys/firmware/acpi/interrupts/ff_rt_clk: 0 disabled >/sys/firmware/acpi/interrupts/ff_slp_btn: 0 invalid >/sys/firmware/acpi/interrupts/gpe00: 0 invalid >/sys/firmware/acpi/interrupts/gpe01: 0 enabled >/sys/firmware/acpi/interrupts/gpe02: 0 enabled >/sys/firmware/acpi/interrupts/gpe03: 0 disabled >/sys/firmware/acpi/interrupts/gpe04: 0 disabled >/sys/firmware/acpi/interrupts/gpe05: 0 disabled >/sys/firmware/acpi/interrupts/gpe06: 0 enabled >/sys/firmware/acpi/interrupts/gpe07: 0 enabled >/sys/firmware/acpi/interrupts/gpe08: 0 invalid >/sys/firmware/acpi/interrupts/gpe09: 0 disabled >/sys/firmware/acpi/interrupts/gpe0A: 0 invalid >/sys/firmware/acpi/interrupts/gpe0B: 0 enabled >/sys/firmware/acpi/interrupts/gpe0C: 0 disabled >/sys/firmware/acpi/interrupts/gpe0D: 0 disabled >/sys/firmware/acpi/interrupts/gpe0E: 0 disabled >/sys/firmware/acpi/interrupts/gpe0F: 0 invalid >/sys/firmware/acpi/interrupts/gpe10: 0 invalid >/sys/firmware/acpi/interrupts/gpe11: 0 invalid >/sys/firmware/acpi/interrupts/gpe12: 0 invalid >/sys/firmware/acpi/interrupts/gpe13: 0 invalid >/sys/firmware/acpi/interrupts/gpe14: 0 invalid >/sys/firmware/acpi/interrupts/gpe15: 0 invalid >/sys/firmware/acpi/interrupts/gpe16: 0 invalid >/sys/firmware/acpi/interrupts/gpe17: 0 enabled >/sys/firmware/acpi/interrupts/gpe18: 0 enabled >/sys/firmware/acpi/interrupts/gpe19: 0 invalid >/sys/firmware/acpi/interrupts/gpe1A: 0 invalid >/sys/firmware/acpi/interrupts/gpe1B: 0 invalid >/sys/firmware/acpi/interrupts/gpe1C: 0 invalid >/sys/firmware/acpi/interrupts/gpe1D: 0 invalid >/sys/firmware/acpi/interrupts/gpe1E: 0 invalid >/sys/firmware/acpi/interrupts/gpe1F: 0 invalid >/sys/firmware/acpi/interrupts/gpe_all: 0 >/sys/firmware/acpi/interrupts/sci: 0 > > >and after 10 times pressing the power button and opening/closing the lid: > >/sys/firmware/acpi/interrupts/error: 0 >/sys/firmware/acpi/interrupts/ff_gbl_lock: 0 enabled >/sys/firmware/acpi/interrupts/ff_pmtimer: 0 invalid >/sys/firmware/acpi/interrupts/ff_pwr_btn: 0 invalid >/sys/firmware/acpi/interrupts/ff_rt_clk: 0 disabled >/sys/firmware/acpi/interrupts/ff_slp_btn: 0 invalid >/sys/firmware/acpi/interrupts/gpe00: 0 invalid >/sys/firmware/acpi/interrupts/gpe01: 0 enabled >/sys/firmware/acpi/interrupts/gpe02: 0 enabled >/sys/firmware/acpi/interrupts/gpe03: 0 disabled >/sys/firmware/acpi/interrupts/gpe04: 0 disabled >/sys/firmware/acpi/interrupts/gpe05: 0 disabled >/sys/firmware/acpi/interrupts/gpe06: 0 enabled >/sys/firmware/acpi/interrupts/gpe07: 0 enabled >/sys/firmware/acpi/interrupts/gpe08: 0 invalid >/sys/firmware/acpi/interrupts/gpe09: 0 disabled >/sys/firmware/acpi/interrupts/gpe0A: 0 invalid >/sys/firmware/acpi/interrupts/gpe0B: 0 enabled >/sys/firmware/acpi/interrupts/gpe0C: 0 disabled >/sys/firmware/acpi/interrupts/gpe0D: 0 disabled >/sys/firmware/acpi/interrupts/gpe0E: 0 disabled >/sys/firmware/acpi/interrupts/gpe0F: 0 invalid >/sys/firmware/acpi/interrupts/gpe10: 0 invalid >/sys/firmware/acpi/interrupts/gpe11: 0 invalid >/sys/firmware/acpi/interrupts/gpe12: 0 invalid >/sys/firmware/acpi/interrupts/gpe13: 0 invalid >/sys/firmware/acpi/interrupts/gpe14: 0 invalid >/sys/firmware/acpi/interrupts/gpe15: 0 invalid >/sys/firmware/acpi/interrupts/gpe16: 0 invalid >/sys/firmware/acpi/interrupts/gpe17: 0 enabled >/sys/firmware/acpi/interrupts/gpe18: 0 enabled >/sys/firmware/acpi/interrupts/gpe19: 0 invalid >/sys/firmware/acpi/interrupts/gpe1A: 0 invalid >/sys/firmware/acpi/interrupts/gpe1B: 0 invalid >/sys/firmware/acpi/interrupts/gpe1C: 0 invalid >/sys/firmware/acpi/interrupts/gpe1D: 0 invalid >/sys/firmware/acpi/interrupts/gpe1E: 0 invalid >/sys/firmware/acpi/interrupts/gpe1F: 0 invalid >/sys/firmware/acpi/interrupts/gpe_all: 0 >/sys/firmware/acpi/interrupts/sci: 0 > >I cant see any difference... > >regards > > sebastian >>> regards >>> >>> sebastian >>> >>> >>>>> sony/hotkey SPIC 00000001 00000021 >>>>> >>>>> >>>>>> run "cat /proc/interrupts" both before and after pressing these buttons, >>>>>> does the number of ACPI or sony interrupts increase? >>>>>> If ACPI interrupts increases, please run >>>>>> "grep . /sys/firmware/acpi/interrupts/*" and tell us which GPE/Fixed >>>>>> event is fired. >>>>>> >>>>>> >>>>>> >>>>>> >>>>> Only the stamina switch and the s2 button increase any interrupts but >>>>> only sony interrupts are generated. >>>>> >>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>>> Should i post them to bugtrackter or >>>>>>> something else? >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>> please file a new bug report at >>>>>> http://bugzilla.kernel.org/enter_bug.cgi?product=ACPI >>>>>> and attach all the request info there. >>>>>> please also attach the acpidump output. >>>>>> >>>>>> thanks, >>>>>> rui >>>>>> >>>>>> >>>>>> >>>>>> >>>>> thank you! >>>>> >>>>> regards >>>>> >>>>> sebastian >>>>> >>>>> >>>> >>>> >> >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html >> ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: acpi on sony vaio vgn-sz61mn 2009-06-23 9:23 ` Zhang, Rui @ 2009-06-23 9:33 ` Sebastian Pohl 2009-06-24 0:58 ` Zhang Rui 0 siblings, 1 reply; 14+ messages in thread From: Sebastian Pohl @ 2009-06-23 9:33 UTC (permalink / raw) To: Zhang, Rui; +Cc: linux-acpi, Mattia Dongili Zhang, Rui wrote: > >> -----Original Message----- >> From: Sebastian Pohl [mailto:sebastianp@uni-koblenz.de] >> Sent: Tuesday, June 23, 2009 5:14 PM >> To: Zhang, Rui >> Cc: linux-acpi@vger.kernel.org; Mattia Dongili >> Subject: Re: acpi on sony vaio vgn-sz61mn >> >>> >> Hi, >> >> this is before: >> >> /sys/firmware/acpi/interrupts/error: 0 >> /sys/firmware/acpi/interrupts/ff_gbl_lock: 0 enabled >> /sys/firmware/acpi/interrupts/ff_pmtimer: 0 invalid >> /sys/firmware/acpi/interrupts/ff_pwr_btn: 0 invalid >> > [Rui] power button fixed event is invalid? > Please make sure CONFIG_ACPI_BUTTON=m/y > > Thanks, > rui > > It was set to CONFIG_ACPI_BUTTON=m ist that right or should i change it? regards sebastian >> >>>> regards >>>> >>>> sebastian >>>> >>>> >>>> >>>>>> sony/hotkey SPIC 00000001 00000021 >>>>>> >>>>>> >>>>>> >>>>>>> run "cat /proc/interrupts" both before and after pressing these buttons, >>>>>>> does the number of ACPI or sony interrupts increase? >>>>>>> If ACPI interrupts increases, please run >>>>>>> "grep . /sys/firmware/acpi/interrupts/*" and tell us which GPE/Fixed >>>>>>> event is fired. >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>> Only the stamina switch and the s2 button increase any interrupts but >>>>>> only sony interrupts are generated. >>>>>> >>>>>> >>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>> Should i post them to bugtrackter or >>>>>>>> something else? >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> please file a new bug report at >>>>>>> http://bugzilla.kernel.org/enter_bug.cgi?product=ACPI >>>>>>> and attach all the request info there. >>>>>>> please also attach the acpidump output. >>>>>>> >>>>>>> thanks, >>>>>>> rui >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>> thank you! >>>>>> >>>>>> regards >>>>>> >>>>>> sebastian >>>>>> >>>>>> >>>>>> >>>>> >>> -- >>> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in >>> the body of a message to majordomo@vger.kernel.org >>> More majordomo info at http://vger.kernel.org/majordomo-info.html >>> >>> > > ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: acpi on sony vaio vgn-sz61mn 2009-06-23 9:33 ` Sebastian Pohl @ 2009-06-24 0:58 ` Zhang Rui 2009-06-24 9:13 ` Sebastian Pohl 0 siblings, 1 reply; 14+ messages in thread From: Zhang Rui @ 2009-06-24 0:58 UTC (permalink / raw) To: Sebastian Pohl; +Cc: linux-acpi, Mattia Dongili On Tue, 2009-06-23 at 17:33 +0800, Sebastian Pohl wrote: > Zhang, Rui wrote: > > > >> -----Original Message----- > >> From: Sebastian Pohl [mailto:sebastianp@uni-koblenz.de] > >> Sent: Tuesday, June 23, 2009 5:14 PM > >> To: Zhang, Rui > >> Cc: linux-acpi@vger.kernel.org; Mattia Dongili > >> Subject: Re: acpi on sony vaio vgn-sz61mn > >> > >>> > >> Hi, > >> > >> this is before: > >> > >> /sys/firmware/acpi/interrupts/error: 0 > >> /sys/firmware/acpi/interrupts/ff_gbl_lock: 0 enabled > >> /sys/firmware/acpi/interrupts/ff_pmtimer: 0 invalid > >> /sys/firmware/acpi/interrupts/ff_pwr_btn: 0 invalid > >> > > [Rui] power button fixed event is invalid? > > Please make sure CONFIG_ACPI_BUTTON=m/y > > > > Thanks, > > rui > > > > > It was set to > > CONFIG_ACPI_BUTTON=m > > ist that right or should i change it? > please make sure it's loaded. please attach the output of "grep . /proc/acpi/button/*/*/*" thanks, rui ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: acpi on sony vaio vgn-sz61mn 2009-06-24 0:58 ` Zhang Rui @ 2009-06-24 9:13 ` Sebastian Pohl 2009-06-25 1:31 ` Zhang Rui 0 siblings, 1 reply; 14+ messages in thread From: Sebastian Pohl @ 2009-06-24 9:13 UTC (permalink / raw) To: Zhang Rui; +Cc: linux-acpi, Mattia Dongili Zhang Rui wrote: > On Tue, 2009-06-23 at 17:33 +0800, Sebastian Pohl wrote: > >> Zhang, Rui wrote: >> >>> >>> >>>> -----Original Message----- >>>> From: Sebastian Pohl [mailto:sebastianp@uni-koblenz.de] >>>> Sent: Tuesday, June 23, 2009 5:14 PM >>>> To: Zhang, Rui >>>> Cc: linux-acpi@vger.kernel.org; Mattia Dongili >>>> Subject: Re: acpi on sony vaio vgn-sz61mn >>>> >>>> >>>>> >>>>> >>>> Hi, >>>> >>>> this is before: >>>> >>>> /sys/firmware/acpi/interrupts/error: 0 >>>> /sys/firmware/acpi/interrupts/ff_gbl_lock: 0 enabled >>>> /sys/firmware/acpi/interrupts/ff_pmtimer: 0 invalid >>>> /sys/firmware/acpi/interrupts/ff_pwr_btn: 0 invalid >>>> >>>> >>> [Rui] power button fixed event is invalid? >>> Please make sure CONFIG_ACPI_BUTTON=m/y >>> >>> Thanks, >>> rui >>> >>> >>> >> It was set to >> >> CONFIG_ACPI_BUTTON=m >> >> ist that right or should i change it? >> >> > please make sure it's loaded. > please attach the output of "grep . /proc/acpi/button/*/*/*" > > thanks, > rui > Hi, the output is /proc/acpi/button/lid/LID0/info:type: Lid Switch /proc/acpi/button/lid/LID0/state:state: open /proc/acpi/button/power/PWRB/info:type: Power Button (CM) I found it interesting that theres a lid switch status listed. So i tried with a magnet to trigger it and it came out like this: /proc/acpi/button/lid/LID0/info:type: Lid Switch /proc/acpi/button/lid/LID0/state:state: closed /proc/acpi/button/power/PWRB/info:type: Power Button (CM) So this makes me think that the lid-switch itself is somehow reporting its status but it doesnt have any effects. regards sebastian ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: acpi on sony vaio vgn-sz61mn 2009-06-24 9:13 ` Sebastian Pohl @ 2009-06-25 1:31 ` Zhang Rui 2009-06-25 8:31 ` Sebastian Pohl 0 siblings, 1 reply; 14+ messages in thread From: Zhang Rui @ 2009-06-25 1:31 UTC (permalink / raw) To: Sebastian Pohl; +Cc: linux-acpi, Mattia Dongili please attach the full dmesg output in the bugzilla. and let's move the discussion there. :) thanks, rui On Wed, 2009-06-24 at 17:13 +0800, Sebastian Pohl wrote: > Zhang Rui wrote: > > On Tue, 2009-06-23 at 17:33 +0800, Sebastian Pohl wrote: > > > >> Zhang, Rui wrote: > >> > >>> > >>> > >>>> -----Original Message----- > >>>> From: Sebastian Pohl [mailto:sebastianp@uni-koblenz.de] > >>>> Sent: Tuesday, June 23, 2009 5:14 PM > >>>> To: Zhang, Rui > >>>> Cc: linux-acpi@vger.kernel.org; Mattia Dongili > >>>> Subject: Re: acpi on sony vaio vgn-sz61mn > >>>> > >>>> > >>>>> > >>>>> > >>>> Hi, > >>>> > >>>> this is before: > >>>> > >>>> /sys/firmware/acpi/interrupts/error: 0 > >>>> /sys/firmware/acpi/interrupts/ff_gbl_lock: 0 enabled > >>>> /sys/firmware/acpi/interrupts/ff_pmtimer: 0 invalid > >>>> /sys/firmware/acpi/interrupts/ff_pwr_btn: 0 invalid > >>>> > >>>> > >>> [Rui] power button fixed event is invalid? > >>> Please make sure CONFIG_ACPI_BUTTON=m/y > >>> > >>> Thanks, > >>> rui > >>> > >>> > >>> > >> It was set to > >> > >> CONFIG_ACPI_BUTTON=m > >> > >> ist that right or should i change it? > >> > >> > > please make sure it's loaded. > > please attach the output of "grep . /proc/acpi/button/*/*/*" > > > > thanks, > > rui > > > Hi, > > the output is > > /proc/acpi/button/lid/LID0/info:type: Lid Switch > /proc/acpi/button/lid/LID0/state:state: open > /proc/acpi/button/power/PWRB/info:type: Power Button (CM) > > I found it interesting that theres a lid switch status listed. So i > tried with a magnet to trigger it and it came out like this: > > /proc/acpi/button/lid/LID0/info:type: Lid Switch > /proc/acpi/button/lid/LID0/state:state: closed > /proc/acpi/button/power/PWRB/info:type: Power Button (CM) > > So this makes me think that the lid-switch itself is somehow reporting > its status but it doesnt have any effects. > > > regards > > sebastian > -- > To unsubscribe from this list: send the line "unsubscribe linux-acpi" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: acpi on sony vaio vgn-sz61mn 2009-06-25 1:31 ` Zhang Rui @ 2009-06-25 8:31 ` Sebastian Pohl 0 siblings, 0 replies; 14+ messages in thread From: Sebastian Pohl @ 2009-06-25 8:31 UTC (permalink / raw) To: Zhang Rui; +Cc: linux-acpi, Mattia Dongili Hi, i opened a bug here http://bugzilla.kernel.org/show_bug.cgi?id=13607 and i will attach the dmesg output later when i get to my notebook. regards sebastian Zhang Rui schrieb: > please attach the full dmesg output in the bugzilla. > and let's move the discussion there. :) > > thanks, > rui > > On Wed, 2009-06-24 at 17:13 +0800, Sebastian Pohl wrote: > >> Zhang Rui wrote: >> >>> On Tue, 2009-06-23 at 17:33 +0800, Sebastian Pohl wrote: >>> >>> >>>> Zhang, Rui wrote: >>>> >>>> >>>>> >>>>> >>>>> >>>>>> -----Original Message----- >>>>>> From: Sebastian Pohl [mailto:sebastianp@uni-koblenz.de] >>>>>> Sent: Tuesday, June 23, 2009 5:14 PM >>>>>> To: Zhang, Rui >>>>>> Cc: linux-acpi@vger.kernel.org; Mattia Dongili >>>>>> Subject: Re: acpi on sony vaio vgn-sz61mn >>>>>> >>>>>> >>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>> Hi, >>>>>> >>>>>> this is before: >>>>>> >>>>>> /sys/firmware/acpi/interrupts/error: 0 >>>>>> /sys/firmware/acpi/interrupts/ff_gbl_lock: 0 enabled >>>>>> /sys/firmware/acpi/interrupts/ff_pmtimer: 0 invalid >>>>>> /sys/firmware/acpi/interrupts/ff_pwr_btn: 0 invalid >>>>>> >>>>>> >>>>>> >>>>> [Rui] power button fixed event is invalid? >>>>> Please make sure CONFIG_ACPI_BUTTON=m/y >>>>> >>>>> Thanks, >>>>> rui >>>>> >>>>> >>>>> >>>>> >>>> It was set to >>>> >>>> CONFIG_ACPI_BUTTON=m >>>> >>>> ist that right or should i change it? >>>> >>>> >>>> >>> please make sure it's loaded. >>> please attach the output of "grep . /proc/acpi/button/*/*/*" >>> >>> thanks, >>> rui >>> >>> >> Hi, >> >> the output is >> >> /proc/acpi/button/lid/LID0/info:type: Lid Switch >> /proc/acpi/button/lid/LID0/state:state: open >> /proc/acpi/button/power/PWRB/info:type: Power Button (CM) >> >> I found it interesting that theres a lid switch status listed. So i >> tried with a magnet to trigger it and it came out like this: >> >> /proc/acpi/button/lid/LID0/info:type: Lid Switch >> /proc/acpi/button/lid/LID0/state:state: closed >> /proc/acpi/button/power/PWRB/info:type: Power Button (CM) >> >> So this makes me think that the lid-switch itself is somehow reporting >> its status but it doesnt have any effects. >> >> >> regards >> >> sebastian >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html >> > > ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: acpi on sony vaio vgn-sz61mn 2009-06-17 13:43 acpi on sony vaio vgn-sz61mn Sebastian Pohl 2009-06-18 0:58 ` Zhang Rui @ 2009-06-18 2:16 ` Mattia Dongili 1 sibling, 0 replies; 14+ messages in thread From: Mattia Dongili @ 2009-06-18 2:16 UTC (permalink / raw) To: Sebastian Pohl; +Cc: linux-acpi On Wed, Jun 17, 2009 at 03:43:22PM +0200, Sebastian Pohl wrote: > Hello everyone! > > Thank you to everyone working on the sony stuff! It made my laptop a > much more valuable companion! > > But there are still some flaws that are left. I am writing to get an > advise what to do with them. Should i post them to bugtrackter or > something else? > > Ok, the problems are: > > - The special button s2 generates the same acpi event as the stamina switch yep, I have some ideas how to fix it in sony-laptop, I'll try to get it done this weekend. > - The lidswitch does not generate any acpi events > - The Power does not generate any acpi events these should be part of the main acpi code, please follow Zhang directions to debug this. Thanks -- mattia :wq! ^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2009-06-25 8:31 UTC | newest] Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2009-06-17 13:43 acpi on sony vaio vgn-sz61mn Sebastian Pohl 2009-06-18 0:58 ` Zhang Rui 2009-06-23 8:30 ` Sebastian Pohl 2009-06-23 8:44 ` Zhang Rui 2009-06-23 8:45 ` Sebastian Pohl 2009-06-23 8:48 ` Zhang Rui 2009-06-23 9:14 ` Sebastian Pohl 2009-06-23 9:23 ` Zhang, Rui 2009-06-23 9:33 ` Sebastian Pohl 2009-06-24 0:58 ` Zhang Rui 2009-06-24 9:13 ` Sebastian Pohl 2009-06-25 1:31 ` Zhang Rui 2009-06-25 8:31 ` Sebastian Pohl 2009-06-18 2:16 ` Mattia Dongili
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.