From: "Eric W. Biederman" <ebiederm@xmission.com>
To: linux-kernel@vger.kernel.org
Cc: "Eric W. Biederman" <ebiederm@xmission.com>,
"John W. Linville" <linville@tuxdriver.com>,
linux-wireless@vger.kernel.org
Subject: [PATCH 02/23] sysctl: Stop using binary sysctl numbers in arlan.
Date: Sun, 8 Nov 2009 04:21:49 -0800 [thread overview]
Message-ID: <1257682930-31401-2-git-send-email-ebiederm@xmission.com> (raw)
In-Reply-To: <m14op5jjo4.fsf@fess.ebiederm.org>
From: Eric W. Biederman <ebiederm@xmission.com>
Looking at the arlan code it appears all of the sysctl
entries are disabled debug code, and have not been enabled
since the driver was merged in feb of 2003.
Since except for a select few that userspace can't
get along without the binary sysctl table entries
are going away. Kill the unused arlan binary sysctls.
Cc: John W. Linville <linville@tuxdriver.com>
Cc: linux-wireless@vger.kernel.org
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
---
drivers/net/wireless/arlan-proc.c | 181 ++++++++++++++-----------------------
1 files changed, 69 insertions(+), 112 deletions(-)
diff --git a/drivers/net/wireless/arlan-proc.c b/drivers/net/wireless/arlan-proc.c
index a8b6896..66a0b33 100644
--- a/drivers/net/wireless/arlan-proc.c
+++ b/drivers/net/wireless/arlan-proc.c
@@ -816,84 +816,83 @@ static int arlan_sysctl_reset(ctl_table * ctl, int write,
/* Place files in /proc/sys/dev/arlan */
-#define CTBLN(num,card,nam) \
- { .ctl_name = num,\
- .procname = #nam,\
+#define CTBLN(card,nam) \
+ { .procname = #nam,\
.data = &(arlan_conf[card].nam),\
.maxlen = sizeof(int), .mode = 0600, .proc_handler = &proc_dointvec}
#ifdef ARLAN_DEBUGGING
#define ARLAN_PROC_DEBUG_ENTRIES \
- { .ctl_name = 48, .procname = "entry_exit_debug",\
+ { .procname = "entry_exit_debug",\
.data = &arlan_entry_and_exit_debug,\
.maxlen = sizeof(int), .mode = 0600, .proc_handler = &proc_dointvec},\
- { .ctl_name = 49, .procname = "debug", .data = &arlan_debug,\
+ { .procname = "debug", .data = &arlan_debug,\
.maxlen = sizeof(int), .mode = 0600, .proc_handler = &proc_dointvec},
#else
#define ARLAN_PROC_DEBUG_ENTRIES
#endif
#define ARLAN_SYSCTL_TABLE_TOTAL(cardNo)\
- CTBLN(1,cardNo,spreadingCode),\
- CTBLN(2,cardNo, channelNumber),\
- CTBLN(3,cardNo, scramblingDisable),\
- CTBLN(4,cardNo, txAttenuation),\
- CTBLN(5,cardNo, systemId), \
- CTBLN(6,cardNo, maxDatagramSize),\
- CTBLN(7,cardNo, maxFrameSize),\
- CTBLN(8,cardNo, maxRetries),\
- CTBLN(9,cardNo, receiveMode),\
- CTBLN(10,cardNo, priority),\
- CTBLN(11,cardNo, rootOrRepeater),\
- CTBLN(12,cardNo, SID),\
- CTBLN(13,cardNo, registrationMode),\
- CTBLN(14,cardNo, registrationFill),\
- CTBLN(15,cardNo, localTalkAddress),\
- CTBLN(16,cardNo, codeFormat),\
- CTBLN(17,cardNo, numChannels),\
- CTBLN(18,cardNo, channel1),\
- CTBLN(19,cardNo, channel2),\
- CTBLN(20,cardNo, channel3),\
- CTBLN(21,cardNo, channel4),\
- CTBLN(22,cardNo, txClear),\
- CTBLN(23,cardNo, txRetries),\
- CTBLN(24,cardNo, txRouting),\
- CTBLN(25,cardNo, txScrambled),\
- CTBLN(26,cardNo, rxParameter),\
- CTBLN(27,cardNo, txTimeoutMs),\
- CTBLN(28,cardNo, waitCardTimeout),\
- CTBLN(29,cardNo, channelSet), \
- {.ctl_name = 30, .procname = "name",\
+ CTBLN(cardNo,spreadingCode),\
+ CTBLN(cardNo, channelNumber),\
+ CTBLN(cardNo, scramblingDisable),\
+ CTBLN(cardNo, txAttenuation),\
+ CTBLN(cardNo, systemId), \
+ CTBLN(cardNo, maxDatagramSize),\
+ CTBLN(cardNo, maxFrameSize),\
+ CTBLN(cardNo, maxRetries),\
+ CTBLN(cardNo, receiveMode),\
+ CTBLN(cardNo, priority),\
+ CTBLN(cardNo, rootOrRepeater),\
+ CTBLN(cardNo, SID),\
+ CTBLN(cardNo, registrationMode),\
+ CTBLN(cardNo, registrationFill),\
+ CTBLN(cardNo, localTalkAddress),\
+ CTBLN(cardNo, codeFormat),\
+ CTBLN(cardNo, numChannels),\
+ CTBLN(cardNo, channel1),\
+ CTBLN(cardNo, channel2),\
+ CTBLN(cardNo, channel3),\
+ CTBLN(cardNo, channel4),\
+ CTBLN(cardNo, txClear),\
+ CTBLN(cardNo, txRetries),\
+ CTBLN(cardNo, txRouting),\
+ CTBLN(cardNo, txScrambled),\
+ CTBLN(cardNo, rxParameter),\
+ CTBLN(cardNo, txTimeoutMs),\
+ CTBLN(cardNo, waitCardTimeout),\
+ CTBLN(cardNo, channelSet), \
+ { .procname = "name",\
.data = arlan_conf[cardNo].siteName,\
.maxlen = 16, .mode = 0600, .proc_handler = &proc_dostring},\
- CTBLN(31,cardNo,waitTime),\
- CTBLN(32,cardNo,lParameter),\
- CTBLN(33,cardNo,_15),\
- CTBLN(34,cardNo,headerSize),\
- CTBLN(36,cardNo,tx_delay_ms),\
- CTBLN(37,cardNo,retries),\
- CTBLN(38,cardNo,ReTransmitPacketMaxSize),\
- CTBLN(39,cardNo,waitReTransmitPacketMaxSize),\
- CTBLN(40,cardNo,fastReTransCount),\
- CTBLN(41,cardNo,driverRetransmissions),\
- CTBLN(42,cardNo,txAckTimeoutMs),\
- CTBLN(43,cardNo,registrationInterrupts),\
- CTBLN(44,cardNo,hardwareType),\
- CTBLN(45,cardNo,radioType),\
- CTBLN(46,cardNo,writeEEPROM),\
- CTBLN(47,cardNo,writeRadioType),\
+ CTBLN(cardNo,waitTime),\
+ CTBLN(cardNo,lParameter),\
+ CTBLN(cardNo,_15),\
+ CTBLN(cardNo,headerSize),\
+ CTBLN(cardNo,tx_delay_ms),\
+ CTBLN(cardNo,retries),\
+ CTBLN(cardNo,ReTransmitPacketMaxSize),\
+ CTBLN(cardNo,waitReTransmitPacketMaxSize),\
+ CTBLN(cardNo,fastReTransCount),\
+ CTBLN(cardNo,driverRetransmissions),\
+ CTBLN(cardNo,txAckTimeoutMs),\
+ CTBLN(cardNo,registrationInterrupts),\
+ CTBLN(cardNo,hardwareType),\
+ CTBLN(cardNo,radioType),\
+ CTBLN(cardNo,writeEEPROM),\
+ CTBLN(cardNo,writeRadioType),\
ARLAN_PROC_DEBUG_ENTRIES\
- CTBLN(50,cardNo,in_speed),\
- CTBLN(51,cardNo,out_speed),\
- CTBLN(52,cardNo,in_speed10),\
- CTBLN(53,cardNo,out_speed10),\
- CTBLN(54,cardNo,in_speed_max),\
- CTBLN(55,cardNo,out_speed_max),\
- CTBLN(56,cardNo,measure_rate),\
- CTBLN(57,cardNo,pre_Command_Wait),\
- CTBLN(58,cardNo,rx_tweak1),\
- CTBLN(59,cardNo,rx_tweak2),\
- CTBLN(60,cardNo,tx_queue_len),\
+ CTBLN(cardNo,in_speed),\
+ CTBLN(cardNo,out_speed),\
+ CTBLN(cardNo,in_speed10),\
+ CTBLN(cardNo,out_speed10),\
+ CTBLN(cardNo,in_speed_max),\
+ CTBLN(cardNo,out_speed_max),\
+ CTBLN(cardNo,measure_rate),\
+ CTBLN(cardNo,pre_Command_Wait),\
+ CTBLN(cardNo,rx_tweak1),\
+ CTBLN(cardNo,rx_tweak2),\
+ CTBLN(cardNo,tx_queue_len),\
@@ -903,7 +902,6 @@ static ctl_table arlan_conf_table0[] =
#ifdef ARLAN_PROC_SHM_DUMP
{
- .ctl_name = 150,
.procname = "arlan0-txRing",
.data = &arlan_drive_info,
.maxlen = ARLAN_STR_SIZE,
@@ -911,7 +909,6 @@ static ctl_table arlan_conf_table0[] =
.proc_handler = &arlan_sysctl_infotxRing,
},
{
- .ctl_name = 151,
.procname = "arlan0-rxRing",
.data = &arlan_drive_info,
.maxlen = ARLAN_STR_SIZE,
@@ -919,7 +916,6 @@ static ctl_table arlan_conf_table0[] =
.proc_handler = &arlan_sysctl_inforxRing,
},
{
- .ctl_name = 152,
.procname = "arlan0-18",
.data = &arlan_drive_info,
.maxlen = ARLAN_STR_SIZE,
@@ -927,7 +923,6 @@ static ctl_table arlan_conf_table0[] =
.proc_handler = &arlan_sysctl_info18,
},
{
- .ctl_name = 153,
.procname = "arlan0-ring",
.data = &arlan_drive_info,
.maxlen = ARLAN_STR_SIZE,
@@ -935,7 +930,6 @@ static ctl_table arlan_conf_table0[] =
.proc_handler = &arlan_sysctl_info161719,
},
{
- .ctl_name = 154,
.procname = "arlan0-shm-cpy",
.data = &arlan_drive_info,
.maxlen = ARLAN_STR_SIZE,
@@ -944,7 +938,6 @@ static ctl_table arlan_conf_table0[] =
},
#endif
{
- .ctl_name = 155,
.procname = "config0",
.data = &conf_reset_result,
.maxlen = 100,
@@ -952,14 +945,13 @@ static ctl_table arlan_conf_table0[] =
.proc_handler = &arlan_configure
},
{
- .ctl_name = 156,
.procname = "reset0",
.data = &conf_reset_result,
.maxlen = 100,
.mode = 0400,
.proc_handler = &arlan_sysctl_reset,
},
- { .ctl_name = 0 }
+ { }
};
static ctl_table arlan_conf_table1[] =
@@ -969,7 +961,6 @@ static ctl_table arlan_conf_table1[] =
#ifdef ARLAN_PROC_SHM_DUMP
{
- .ctl_name = 150,
.procname = "arlan1-txRing",
.data = &arlan_drive_info,
.maxlen = ARLAN_STR_SIZE,
@@ -977,7 +968,6 @@ static ctl_table arlan_conf_table1[] =
.proc_handler = &arlan_sysctl_infotxRing,
},
{
- .ctl_name = 151,
.procname = "arlan1-rxRing",
.data = &arlan_drive_info,
.maxlen = ARLAN_STR_SIZE,
@@ -985,7 +975,6 @@ static ctl_table arlan_conf_table1[] =
.proc_handler = &arlan_sysctl_inforxRing,
},
{
- .ctl_name = 152,
.procname = "arlan1-18",
.data = &arlan_drive_info,
.maxlen = ARLAN_STR_SIZE,
@@ -993,7 +982,6 @@ static ctl_table arlan_conf_table1[] =
.proc_handler = &arlan_sysctl_info18,
},
{
- .ctl_name = 153,
.procname = "arlan1-ring",
.data = &arlan_drive_info,
.maxlen = ARLAN_STR_SIZE,
@@ -1001,7 +989,6 @@ static ctl_table arlan_conf_table1[] =
.proc_handler = &arlan_sysctl_info161719,
},
{
- .ctl_name = 154,
.procname = "arlan1-shm-cpy",
.data = &arlan_drive_info,
.maxlen = ARLAN_STR_SIZE,
@@ -1010,7 +997,6 @@ static ctl_table arlan_conf_table1[] =
},
#endif
{
- .ctl_name = 155,
.procname = "config1",
.data = &conf_reset_result,
.maxlen = 100,
@@ -1018,14 +1004,13 @@ static ctl_table arlan_conf_table1[] =
.proc_handler = &arlan_configure,
},
{
- .ctl_name = 156,
.procname = "reset1",
.data = &conf_reset_result,
.maxlen = 100,
.mode = 0400,
.proc_handler = &arlan_sysctl_reset,
},
- { .ctl_name = 0 }
+ { }
};
static ctl_table arlan_conf_table2[] =
@@ -1035,7 +1020,6 @@ static ctl_table arlan_conf_table2[] =
#ifdef ARLAN_PROC_SHM_DUMP
{
- .ctl_name = 150,
.procname = "arlan2-txRing",
.data = &arlan_drive_info,
.maxlen = ARLAN_STR_SIZE,
@@ -1043,7 +1027,6 @@ static ctl_table arlan_conf_table2[] =
.proc_handler = &arlan_sysctl_infotxRing,
},
{
- .ctl_name = 151,
.procname = "arlan2-rxRing",
.data = &arlan_drive_info,
.maxlen = ARLAN_STR_SIZE,
@@ -1051,7 +1034,6 @@ static ctl_table arlan_conf_table2[] =
.proc_handler = &arlan_sysctl_inforxRing,
},
{
- .ctl_name = 152,
.procname = "arlan2-18",
.data = &arlan_drive_info,
.maxlen = ARLAN_STR_SIZE,
@@ -1059,7 +1041,6 @@ static ctl_table arlan_conf_table2[] =
.proc_handler = &arlan_sysctl_info18,
},
{
- .ctl_name = 153,
.procname = "arlan2-ring",
.data = &arlan_drive_info,
.maxlen = ARLAN_STR_SIZE,
@@ -1067,7 +1048,6 @@ static ctl_table arlan_conf_table2[] =
.proc_handler = &arlan_sysctl_info161719,
},
{
- .ctl_name = 154,
.procname = "arlan2-shm-cpy",
.data = &arlan_drive_info,
.maxlen = ARLAN_STR_SIZE,
@@ -1076,7 +1056,6 @@ static ctl_table arlan_conf_table2[] =
},
#endif
{
- .ctl_name = 155,
.procname = "config2",
.data = &conf_reset_result,
.maxlen = 100,
@@ -1084,14 +1063,13 @@ static ctl_table arlan_conf_table2[] =
.proc_handler = &arlan_configure,
},
{
- .ctl_name = 156,
.procname = "reset2",
.data = &conf_reset_result,
.maxlen = 100,
.mode = 0400,
.proc_handler = &arlan_sysctl_reset,
},
- { .ctl_name = 0 }
+ { }
};
static ctl_table arlan_conf_table3[] =
@@ -1101,7 +1079,6 @@ static ctl_table arlan_conf_table3[] =
#ifdef ARLAN_PROC_SHM_DUMP
{
- .ctl_name = 150,
.procname = "arlan3-txRing",
.data = &arlan_drive_info,
.maxlen = ARLAN_STR_SIZE,
@@ -1109,7 +1086,6 @@ static ctl_table arlan_conf_table3[] =
.proc_handler = &arlan_sysctl_infotxRing,
},
{
- .ctl_name = 151,
.procname = "arlan3-rxRing",
.data = &arlan_drive_info,
.maxlen = ARLAN_STR_SIZE,
@@ -1117,7 +1093,6 @@ static ctl_table arlan_conf_table3[] =
.proc_handler = &arlan_sysctl_inforxRing,
},
{
- .ctl_name = 152,
.procname = "arlan3-18",
.data = &arlan_drive_info,
.maxlen = ARLAN_STR_SIZE,
@@ -1125,7 +1100,6 @@ static ctl_table arlan_conf_table3[] =
.proc_handler = &arlan_sysctl_info18,
},
{
- .ctl_name = 153,
.procname = "arlan3-ring",
.data = &arlan_drive_info,
.maxlen = ARLAN_STR_SIZE,
@@ -1133,7 +1107,6 @@ static ctl_table arlan_conf_table3[] =
.proc_handler = &arlan_sysctl_info161719,
},
{
- .ctl_name = 154,
.procname = "arlan3-shm-cpy",
.data = &arlan_drive_info,
.maxlen = ARLAN_STR_SIZE,
@@ -1142,7 +1115,6 @@ static ctl_table arlan_conf_table3[] =
},
#endif
{
- .ctl_name = 155,
.procname = "config3",
.data = &conf_reset_result,
.maxlen = 100,
@@ -1150,14 +1122,13 @@ static ctl_table arlan_conf_table3[] =
.proc_handler = &arlan_configure,
},
{
- .ctl_name = 156,
.procname = "reset3",
.data = &conf_reset_result,
.maxlen = 100,
.mode = 0400,
.proc_handler = &arlan_sysctl_reset,
},
- { .ctl_name = 0 }
+ { }
};
@@ -1165,41 +1136,37 @@ static ctl_table arlan_conf_table3[] =
static ctl_table arlan_table[] =
{
{
- .ctl_name = 0,
.procname = "arlan0",
.maxlen = 0,
.mode = 0600,
.child = arlan_conf_table0,
},
{
- .ctl_name = 0,
.procname = "arlan1",
.maxlen = 0,
.mode = 0600,
.child = arlan_conf_table1,
},
{
- .ctl_name = 0,
.procname = "arlan2",
.maxlen = 0,
.mode = 0600,
.child = arlan_conf_table2,
},
{
- .ctl_name = 0,
.procname = "arlan3",
.maxlen = 0,
.mode = 0600,
.child = arlan_conf_table3,
},
- { .ctl_name = 0 }
+ { }
};
#else
-static ctl_table arlan_table[MAX_ARLANS + 1] =
+static ctl_table arlan_table[] =
{
- { .ctl_name = 0 }
+ { }
};
#endif
@@ -1209,22 +1176,14 @@ static ctl_table arlan_table[MAX_ARLANS + 1] =
static ctl_table arlan_root_table[] =
{
{
- .ctl_name = CTL_ARLAN,
.procname = "arlan",
.maxlen = 0,
.mode = 0555,
.child = arlan_table,
},
- { .ctl_name = 0 }
+ { }
};
-/* Make sure that /proc/sys/dev is there */
-//static ctl_table arlan_device_root_table[] =
-//{
-// {CTL_DEV, "dev", NULL, 0, 0555, arlan_root_table},
-// {0}
-//};
-
static struct ctl_table_header *arlan_device_sysctl_header;
@@ -1234,8 +1193,6 @@ int __init init_arlan_proc(void)
int i = 0;
if (arlan_device_sysctl_header)
return 0;
- for (i = 0; i < MAX_ARLANS && arlan_device[i]; i++)
- arlan_table[i].ctl_name = i + 1;
arlan_device_sysctl_header = register_sysctl_table(arlan_root_table);
if (!arlan_device_sysctl_header)
return -1;
--
1.6.5.2.143.g8cc62
next prev parent reply other threads:[~2009-11-08 12:22 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-11-08 12:16 [PATCH 00/23] Removal of binary sysctl support Eric W. Biederman
2009-11-08 12:21 ` [PATCH 01/23] sysctl: Remove the unused frv sysctl unumbers Eric W. Biederman
2009-11-08 12:21 ` Eric W. Biederman [this message]
2009-11-11 21:07 ` [PATCH 02/23] sysctl: Stop using binary sysctl numbers in arlan John W. Linville
2009-11-08 12:21 ` [PATCH 03/23] sysctl: Reduce sys_sysctl to a compatibility wrapper around /proc/sys Eric W. Biederman
2009-11-08 12:21 ` [PATCH 04/23] sysctl: Neuter the generic sysctl strategy routines Eric W. Biederman
2009-11-08 12:21 ` [PATCH 05/23] sysctl: Remove dead code from sysctl_check Eric W. Biederman
2009-11-08 12:21 ` [PATCH 06/23] sysctl: Remove references to ctl_name and strategy from the generic sysctl table Eric W. Biederman
2009-11-08 12:21 ` [PATCH 07/23] sysctl: Don't look at ctl_name and strategy in the generic code Eric W. Biederman
2009-11-08 12:21 ` [PATCH 08/23] sysctl ipc: Remove dead binary sysctl support code Eric W. Biederman
2009-11-08 12:21 ` [PATCH 09/23] sysctl net: Remove unused binary sysctl code Eric W. Biederman
2009-11-08 12:21 ` [PATCH 10/23] sysctl fs: Remove dead binary sysctl support Eric W. Biederman
2009-11-08 12:21 ` [PATCH 11/23] sysctl kernel: Remove binary sysctl logic Eric W. Biederman
2009-11-08 12:21 ` [PATCH 12/23] sysctl security/keys: Remove dead binary sysctl support Eric W. Biederman
2009-11-08 12:22 ` [PATCH 13/23] sysctl crypto: " Eric W. Biederman
2009-11-08 15:44 ` Herbert Xu
2009-11-08 12:22 ` [PATCH 14/23] sysctl drivers: " Eric W. Biederman
2009-11-09 8:17 ` Clemens Ladisch
2009-11-08 12:22 ` [PATCH 15/23] sysctl mips/lasat: " Eric W. Biederman
2009-11-09 14:10 ` Ralf Baechle
2009-11-08 12:22 ` [PATCH 16/23] sysctl frv: " Eric W. Biederman
2009-11-08 12:22 ` [PATCH 17/23] sysctl s390: Remove dead sysctl binary support Eric W. Biederman
2009-11-08 12:22 ` [PATCH 18/23] sysctl ia64: Remove dead binary sysctl support Eric W. Biederman
2009-11-08 12:22 ` [PATCH 19/23] sysctl powerpc: " Eric W. Biederman
2009-11-08 20:44 ` Benjamin Herrenschmidt
2009-11-08 12:22 ` [PATCH 20/23] sysctl sh: " Eric W. Biederman
2009-11-08 12:22 ` [PATCH 21/23] sysctl x86: " Eric W. Biederman
2009-11-08 12:22 ` [PATCH 22/23] sysctl arm: Remove " Eric W. Biederman
2009-11-08 12:34 ` Russell King
2009-11-08 22:45 ` Eric W. Biederman
2009-11-08 22:56 ` Russell King
2009-11-08 23:31 ` Eric W. Biederman
2009-11-08 23:34 ` Russell King
2009-11-08 23:05 ` Eric W. Biederman
2009-11-09 0:48 ` Arjan van de Ven
2009-11-09 3:27 ` Eric W. Biederman
2009-11-09 4:57 ` Arjan van de Ven
2009-11-09 5:37 ` Eric W. Biederman
2009-11-09 9:38 ` Andi Kleen
2009-11-09 11:45 ` Eric W. Biederman
2009-11-09 12:04 ` Andi Kleen
2009-11-09 12:41 ` Eric W. Biederman
2009-11-09 13:28 ` Andi Kleen
2009-11-09 15:28 ` Arnd Bergmann
2009-11-09 15:46 ` Andi Kleen
2009-11-09 16:23 ` Arnd Bergmann
2009-11-10 4:42 ` Eric W. Biederman
2009-11-10 8:01 ` Eric W. Biederman
2009-11-11 2:31 ` Eric W. Biederman
2009-11-09 12:42 ` Eric W. Biederman
2009-11-08 12:22 ` [PATCH 23/23] sysctl: Remove the last of the generic " Eric W. Biederman
2009-11-08 13:06 ` [PATCH 00/23] Removal of " Arnd Bergmann
2009-11-09 3:44 ` Eric W. Biederman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1257682930-31401-2-git-send-email-ebiederm@xmission.com \
--to=ebiederm@xmission.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.