* [U-Boot] [PATCH 0/3] omap2: i2c: minor cleanup
[not found] <Commit d708395d breaks omap2420h4 board...>
@ 2010-08-19 0:39 ` Nishanth Menon
2010-08-19 3:28 ` Steve Sakoman
2010-08-19 0:39 ` [U-Boot] [PATCH 1/3] i2c: omap2+: change header guard to be generic Nishanth Menon
` (2 subsequent siblings)
3 siblings, 1 reply; 11+ messages in thread
From: Nishanth Menon @ 2010-08-19 0:39 UTC (permalink / raw)
To: u-boot
As reported by wolfgang [1] sdp2420 platform build is broken atm
looking at the same showed some potential cleanups possible
in addition to fixing the problem
Warning: i dont have a board around, so only build tested for omap2,
tested for omap3
Nishanth Menon (3):
i2c: omap2+: change header guard to be generic
omap2: i2c: add syss offset
omap2: i2c: remove redundant header definitions
arch/arm/include/asm/arch-omap24xx/i2c.h | 110 +-----------------------------
drivers/i2c/omap24xx_i2c.h | 4 +-
2 files changed, 5 insertions(+), 109 deletions(-)
Cc: Steve Sakoman <steve@sakoman.com>
Cc: Heiko <hs@denx.de>
Cc: Sandeep Paulraj <s-paulraj@ti.com>
Cc: Wolfang Denk <wd@denx.de>
Regards,
Nishanth Menon
Ref:
[1] http://lists.denx.de/pipermail/u-boot/2010-August/075826.html
^ permalink raw reply [flat|nested] 11+ messages in thread
* [U-Boot] [PATCH 1/3] i2c: omap2+: change header guard to be generic
[not found] <Commit d708395d breaks omap2420h4 board...>
2010-08-19 0:39 ` [U-Boot] [PATCH 0/3] omap2: i2c: minor cleanup Nishanth Menon
@ 2010-08-19 0:39 ` Nishanth Menon
2010-08-19 3:29 ` Steve Sakoman
2010-08-19 0:39 ` [U-Boot] [PATCH 2/3] omap2: i2c: add syss offset Nishanth Menon
2010-08-19 0:39 ` [U-Boot] [PATCH 3/3] omap2: i2c: remove redundant header definitions Nishanth Menon
3 siblings, 1 reply; 11+ messages in thread
From: Nishanth Menon @ 2010-08-19 0:39 UTC (permalink / raw)
To: u-boot
Make the header guard to be generic to stop conflicting with
omap2 i2c header file arch/arm/include/asm/arch-omap24xx/i2c.h
Cc: Steve Sakoman <steve@sakoman.com>
Cc: Heiko <hs@denx.de>
Cc: Sandeep Paulraj <s-paulraj@ti.com>
Cc: Wolfang Denk <wd@denx.de>
Signed-off-by: Nishanth Menon <nm@ti.com>
---
drivers/i2c/omap24xx_i2c.h | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/i2c/omap24xx_i2c.h b/drivers/i2c/omap24xx_i2c.h
index 650e33a..1f38c23 100644
--- a/drivers/i2c/omap24xx_i2c.h
+++ b/drivers/i2c/omap24xx_i2c.h
@@ -20,8 +20,8 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
-#ifndef _OMAP24XX_I2C_H_
-#define _OMAP24XX_I2C_H_
+#ifndef _OMAP2PLUS_I2C_H_
+#define _OMAP2PLUS_I2C_H_
/* I2C masks */
--
1.6.3.3
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [U-Boot] [PATCH 2/3] omap2: i2c: add syss offset
[not found] <Commit d708395d breaks omap2420h4 board...>
2010-08-19 0:39 ` [U-Boot] [PATCH 0/3] omap2: i2c: minor cleanup Nishanth Menon
2010-08-19 0:39 ` [U-Boot] [PATCH 1/3] i2c: omap2+: change header guard to be generic Nishanth Menon
@ 2010-08-19 0:39 ` Nishanth Menon
2010-08-19 3:28 ` Steve Sakoman
2010-08-19 0:39 ` [U-Boot] [PATCH 3/3] omap2: i2c: remove redundant header definitions Nishanth Menon
3 siblings, 1 reply; 11+ messages in thread
From: Nishanth Menon @ 2010-08-19 0:39 UTC (permalink / raw)
To: u-boot
OMAP2420 ES2.3 trm defines syss register offset as 0x10. Add it.
Cc: Steve Sakoman <steve@sakoman.com>
Cc: Heiko <hs@denx.de>
Cc: Sandeep Paulraj <s-paulraj@ti.com>
Cc: Wolfang Denk <wd@denx.de>
Signed-off-by: Nishanth Menon <nm@ti.com>
---
arch/arm/include/asm/arch-omap24xx/i2c.h | 4 +++-
1 files changed, 3 insertions(+), 1 deletions(-)
diff --git a/arch/arm/include/asm/arch-omap24xx/i2c.h b/arch/arm/include/asm/arch-omap24xx/i2c.h
index 19046aa..418a432 100644
--- a/arch/arm/include/asm/arch-omap24xx/i2c.h
+++ b/arch/arm/include/asm/arch-omap24xx/i2c.h
@@ -36,7 +36,9 @@ struct i2c {
unsigned short stat; /* 0x08 */
unsigned short res3;
unsigned short iv; /* 0x0C */
- unsigned short res4[3];
+ unsigned short res4;
+ unsigned short syss; /* 0x10 */
+ unsigned short res4p1;
unsigned short buf; /* 0x14 */
unsigned short res5;
unsigned short cnt; /* 0x18 */
--
1.6.3.3
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [U-Boot] [PATCH 3/3] omap2: i2c: remove redundant header definitions
[not found] <Commit d708395d breaks omap2420h4 board...>
` (2 preceding siblings ...)
2010-08-19 0:39 ` [U-Boot] [PATCH 2/3] omap2: i2c: add syss offset Nishanth Menon
@ 2010-08-19 0:39 ` Nishanth Menon
2010-08-19 3:30 ` Steve Sakoman
3 siblings, 1 reply; 11+ messages in thread
From: Nishanth Menon @ 2010-08-19 0:39 UTC (permalink / raw)
To: u-boot
Remove the register offset and common defines which are
already present in drivers/i2c/omap24xx.h. All of these
defines carry the same value even.
Cc: Steve Sakoman <steve@sakoman.com>
Cc: Heiko <hs@denx.de>
Cc: Sandeep Paulraj <s-paulraj@ti.com>
Cc: Wolfang Denk <wd@denx.de>
Signed-off-by: Nishanth Menon <nm@ti.com>
---
arch/arm/include/asm/arch-omap24xx/i2c.h | 106 ------------------------------
1 files changed, 0 insertions(+), 106 deletions(-)
diff --git a/arch/arm/include/asm/arch-omap24xx/i2c.h b/arch/arm/include/asm/arch-omap24xx/i2c.h
index 418a432..6f64519 100644
--- a/arch/arm/include/asm/arch-omap24xx/i2c.h
+++ b/arch/arm/include/asm/arch-omap24xx/i2c.h
@@ -65,110 +65,4 @@ struct i2c {
#define I2C_BUS_MAX 2
-/* I2C masks */
-
-/* I2C Interrupt Enable Register (I2C_IE): */
-#define I2C_IE_GC_IE (1 << 5)
-#define I2C_IE_XRDY_IE (1 << 4) /* Transmit data ready interrupt enable */
-#define I2C_IE_RRDY_IE (1 << 3) /* Receive data ready interrupt enable */
-#define I2C_IE_ARDY_IE (1 << 2) /* Register access ready interrupt enable */
-#define I2C_IE_NACK_IE (1 << 1) /* No acknowledgment interrupt enable */
-#define I2C_IE_AL_IE (1 << 0) /* Arbitration lost interrupt enable */
-
-/* I2C Status Register (I2C_STAT): */
-
-#define I2C_STAT_SBD (1 << 15) /* Single byte data */
-#define I2C_STAT_BB (1 << 12) /* Bus busy */
-#define I2C_STAT_ROVR (1 << 11) /* Receive overrun */
-#define I2C_STAT_XUDF (1 << 10) /* Transmit underflow */
-#define I2C_STAT_AAS (1 << 9) /* Address as slave */
-#define I2C_STAT_GC (1 << 5)
-#define I2C_STAT_XRDY (1 << 4) /* Transmit data ready */
-#define I2C_STAT_RRDY (1 << 3) /* Receive data ready */
-#define I2C_STAT_ARDY (1 << 2) /* Register access ready */
-#define I2C_STAT_NACK (1 << 1) /* No acknowledgment interrupt enable */
-#define I2C_STAT_AL (1 << 0) /* Arbitration lost interrupt enable */
-
-
-/* I2C Interrupt Code Register (I2C_INTCODE): */
-
-#define I2C_INTCODE_MASK 7
-#define I2C_INTCODE_NONE 0
-#define I2C_INTCODE_AL 1 /* Arbitration lost */
-#define I2C_INTCODE_NAK 2 /* No acknowledgement/general call */
-#define I2C_INTCODE_ARDY 3 /* Register access ready */
-#define I2C_INTCODE_RRDY 4 /* Rcv data ready */
-#define I2C_INTCODE_XRDY 5 /* Xmit data ready */
-
-/* I2C Buffer Configuration Register (I2C_BUF): */
-
-#define I2C_BUF_RDMA_EN (1 << 15) /* Receive DMA channel enable */
-#define I2C_BUF_XDMA_EN (1 << 7) /* Transmit DMA channel enable */
-
-/* I2C Configuration Register (I2C_CON): */
-
-#define I2C_CON_EN (1 << 15) /* I2C module enable */
-#define I2C_CON_BE (1 << 14) /* Big endian mode */
-#define I2C_CON_STB (1 << 11) /* Start byte mode (master mode only) */
-#define I2C_CON_MST (1 << 10) /* Master/slave mode */
-#define I2C_CON_TRX (1 << 9) /* Transmitter/receiver mode (master mode only) */
-#define I2C_CON_XA (1 << 8) /* Expand address */
-#define I2C_CON_STP (1 << 1) /* Stop condition (master mode only) */
-#define I2C_CON_STT (1 << 0) /* Start condition (master mode only) */
-
-/* I2C System Test Register (I2C_SYSTEST): */
-
-#define I2C_SYSTEST_ST_EN (1 << 15) /* System test enable */
-#define I2C_SYSTEST_FREE (1 << 14) /* Free running mode (on breakpoint) */
-#define I2C_SYSTEST_TMODE_MASK (3 << 12) /* Test mode select */
-#define I2C_SYSTEST_TMODE_SHIFT (12) /* Test mode select */
-#define I2C_SYSTEST_SCL_I (1 << 3) /* SCL line sense input value */
-#define I2C_SYSTEST_SCL_O (1 << 2) /* SCL line drive output value */
-#define I2C_SYSTEST_SDA_I (1 << 1) /* SDA line sense input value */
-#define I2C_SYSTEST_SDA_O (1 << 0) /* SDA line drive output value */
-
-/* These values were copied from omap3, include/asm-arm/arch-omap3/i2c.h. */
-#define OMAP_I2C_STANDARD 100000
-#define OMAP_I2C_FAST_MODE 400000
-#define OMAP_I2C_HIGH_SPEED 3400000
-
-#define SYSTEM_CLOCK_12 12000000
-#define SYSTEM_CLOCK_13 13000000
-#define SYSTEM_CLOCK_192 19200000
-#define SYSTEM_CLOCK_96 96000000
-
-#ifndef I2C_IP_CLK
-#define I2C_IP_CLK SYSTEM_CLOCK_96
-#endif
-
-#ifndef I2C_INTERNAL_SAMPLING_CLK
-#define I2C_INTERNAL_SAMPLING_CLK 19200000
-#endif
-
-/* These are the trim values for standard and fast speed */
-#ifndef I2C_FASTSPEED_SCLL_TRIM
-#define I2C_FASTSPEED_SCLL_TRIM 6
-#endif
-#ifndef I2C_FASTSPEED_SCLH_TRIM
-#define I2C_FASTSPEED_SCLH_TRIM 6
-#endif
-
-/* These are the trim values for high speed */
-#ifndef I2C_HIGHSPEED_PHASE_ONE_SCLL_TRIM
-#define I2C_HIGHSPEED_PHASE_ONE_SCLL_TRIM I2C_FASTSPEED_SCLL_TRIM
-#endif
-#ifndef I2C_HIGHSPEED_PHASE_ONE_SCLH_TRIM
-#define I2C_HIGHSPEED_PHASE_ONE_SCLH_TRIM I2C_FASTSPEED_SCLH_TRIM
-#endif
-#ifndef I2C_HIGHSPEED_PHASE_TWO_SCLL_TRIM
-#define I2C_HIGHSPEED_PHASE_TWO_SCLL_TRIM I2C_FASTSPEED_SCLL_TRIM
-#endif
-#ifndef I2C_HIGHSPEED_PHASE_TWO_SCLH_TRIM
-#define I2C_HIGHSPEED_PHASE_TWO_SCLH_TRIM I2C_FASTSPEED_SCLH_TRIM
-#endif
-
-#define I2C_PSC_MAX 0x0f
-#define I2C_PSC_MIN 0x00
-
-
#endif
--
1.6.3.3
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [U-Boot] [PATCH 0/3] omap2: i2c: minor cleanup
2010-08-19 0:39 ` [U-Boot] [PATCH 0/3] omap2: i2c: minor cleanup Nishanth Menon
@ 2010-08-19 3:28 ` Steve Sakoman
2010-08-23 6:29 ` [U-Boot] Pull request: u-boot-i2c Heiko Schocher
0 siblings, 1 reply; 11+ messages in thread
From: Steve Sakoman @ 2010-08-19 3:28 UTC (permalink / raw)
To: u-boot
On Wed, 2010-08-18 at 19:39 -0500, Nishanth Menon wrote:
> As reported by wolfgang [1] sdp2420 platform build is broken atm
>
> looking at the same showed some potential cleanups possible
> in addition to fixing the problem
Thanks Nishanth! You beat me to it.
These look fine to me, I'll add my Ack-ed by to the individual patches.
Steve
> Warning: i dont have a board around, so only build tested for omap2,
> tested for omap3
>
>
> Nishanth Menon (3):
> i2c: omap2+: change header guard to be generic
> omap2: i2c: add syss offset
> omap2: i2c: remove redundant header definitions
>
> arch/arm/include/asm/arch-omap24xx/i2c.h | 110 +-----------------------------
> drivers/i2c/omap24xx_i2c.h | 4 +-
> 2 files changed, 5 insertions(+), 109 deletions(-)
>
> Cc: Steve Sakoman <steve@sakoman.com>
> Cc: Heiko <hs@denx.de>
> Cc: Sandeep Paulraj <s-paulraj@ti.com>
> Cc: Wolfang Denk <wd@denx.de>
>
> Regards,
> Nishanth Menon
> Ref:
> [1] http://lists.denx.de/pipermail/u-boot/2010-August/075826.html
^ permalink raw reply [flat|nested] 11+ messages in thread
* [U-Boot] [PATCH 2/3] omap2: i2c: add syss offset
2010-08-19 0:39 ` [U-Boot] [PATCH 2/3] omap2: i2c: add syss offset Nishanth Menon
@ 2010-08-19 3:28 ` Steve Sakoman
0 siblings, 0 replies; 11+ messages in thread
From: Steve Sakoman @ 2010-08-19 3:28 UTC (permalink / raw)
To: u-boot
On Wed, 2010-08-18 at 19:39 -0500, Nishanth Menon wrote:
> OMAP2420 ES2.3 trm defines syss register offset as 0x10. Add it.
>
> Cc: Steve Sakoman <steve@sakoman.com>
> Cc: Heiko <hs@denx.de>
> Cc: Sandeep Paulraj <s-paulraj@ti.com>
> Cc: Wolfang Denk <wd@denx.de>
>
> Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Steve Sakoman <steve@sakoman.com>
Steve
> ---
> arch/arm/include/asm/arch-omap24xx/i2c.h | 4 +++-
> 1 files changed, 3 insertions(+), 1 deletions(-)
>
> diff --git a/arch/arm/include/asm/arch-omap24xx/i2c.h b/arch/arm/include/asm/arch-omap24xx/i2c.h
> index 19046aa..418a432 100644
> --- a/arch/arm/include/asm/arch-omap24xx/i2c.h
> +++ b/arch/arm/include/asm/arch-omap24xx/i2c.h
> @@ -36,7 +36,9 @@ struct i2c {
> unsigned short stat; /* 0x08 */
> unsigned short res3;
> unsigned short iv; /* 0x0C */
> - unsigned short res4[3];
> + unsigned short res4;
> + unsigned short syss; /* 0x10 */
> + unsigned short res4p1;
> unsigned short buf; /* 0x14 */
> unsigned short res5;
> unsigned short cnt; /* 0x18 */
^ permalink raw reply [flat|nested] 11+ messages in thread
* [U-Boot] [PATCH 1/3] i2c: omap2+: change header guard to be generic
2010-08-19 0:39 ` [U-Boot] [PATCH 1/3] i2c: omap2+: change header guard to be generic Nishanth Menon
@ 2010-08-19 3:29 ` Steve Sakoman
0 siblings, 0 replies; 11+ messages in thread
From: Steve Sakoman @ 2010-08-19 3:29 UTC (permalink / raw)
To: u-boot
On Wed, 2010-08-18 at 19:39 -0500, Nishanth Menon wrote:
> Make the header guard to be generic to stop conflicting with
> omap2 i2c header file arch/arm/include/asm/arch-omap24xx/i2c.h
>
> Cc: Steve Sakoman <steve@sakoman.com>
> Cc: Heiko <hs@denx.de>
> Cc: Sandeep Paulraj <s-paulraj@ti.com>
> Cc: Wolfang Denk <wd@denx.de>
>
> Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Steve Sakoman <steve@sakoman.com>
Steve
> ---
> drivers/i2c/omap24xx_i2c.h | 4 ++--
> 1 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/i2c/omap24xx_i2c.h b/drivers/i2c/omap24xx_i2c.h
> index 650e33a..1f38c23 100644
> --- a/drivers/i2c/omap24xx_i2c.h
> +++ b/drivers/i2c/omap24xx_i2c.h
> @@ -20,8 +20,8 @@
> * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> * MA 02111-1307 USA
> */
> -#ifndef _OMAP24XX_I2C_H_
> -#define _OMAP24XX_I2C_H_
> +#ifndef _OMAP2PLUS_I2C_H_
> +#define _OMAP2PLUS_I2C_H_
>
> /* I2C masks */
>
^ permalink raw reply [flat|nested] 11+ messages in thread
* [U-Boot] [PATCH 3/3] omap2: i2c: remove redundant header definitions
2010-08-19 0:39 ` [U-Boot] [PATCH 3/3] omap2: i2c: remove redundant header definitions Nishanth Menon
@ 2010-08-19 3:30 ` Steve Sakoman
0 siblings, 0 replies; 11+ messages in thread
From: Steve Sakoman @ 2010-08-19 3:30 UTC (permalink / raw)
To: u-boot
On Wed, 2010-08-18 at 19:39 -0500, Nishanth Menon wrote:
> Remove the register offset and common defines which are
> already present in drivers/i2c/omap24xx.h. All of these
> defines carry the same value even.
>
> Cc: Steve Sakoman <steve@sakoman.com>
> Cc: Heiko <hs@denx.de>
> Cc: Sandeep Paulraj <s-paulraj@ti.com>
> Cc: Wolfang Denk <wd@denx.de>
>
> Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Steve Sakoman <steve@sakoman.com>
Steve
> ---
> arch/arm/include/asm/arch-omap24xx/i2c.h | 106 ------------------------------
> 1 files changed, 0 insertions(+), 106 deletions(-)
>
> diff --git a/arch/arm/include/asm/arch-omap24xx/i2c.h b/arch/arm/include/asm/arch-omap24xx/i2c.h
> index 418a432..6f64519 100644
> --- a/arch/arm/include/asm/arch-omap24xx/i2c.h
> +++ b/arch/arm/include/asm/arch-omap24xx/i2c.h
> @@ -65,110 +65,4 @@ struct i2c {
>
> #define I2C_BUS_MAX 2
>
> -/* I2C masks */
> -
> -/* I2C Interrupt Enable Register (I2C_IE): */
> -#define I2C_IE_GC_IE (1 << 5)
> -#define I2C_IE_XRDY_IE (1 << 4) /* Transmit data ready interrupt enable */
> -#define I2C_IE_RRDY_IE (1 << 3) /* Receive data ready interrupt enable */
> -#define I2C_IE_ARDY_IE (1 << 2) /* Register access ready interrupt enable */
> -#define I2C_IE_NACK_IE (1 << 1) /* No acknowledgment interrupt enable */
> -#define I2C_IE_AL_IE (1 << 0) /* Arbitration lost interrupt enable */
> -
> -/* I2C Status Register (I2C_STAT): */
> -
> -#define I2C_STAT_SBD (1 << 15) /* Single byte data */
> -#define I2C_STAT_BB (1 << 12) /* Bus busy */
> -#define I2C_STAT_ROVR (1 << 11) /* Receive overrun */
> -#define I2C_STAT_XUDF (1 << 10) /* Transmit underflow */
> -#define I2C_STAT_AAS (1 << 9) /* Address as slave */
> -#define I2C_STAT_GC (1 << 5)
> -#define I2C_STAT_XRDY (1 << 4) /* Transmit data ready */
> -#define I2C_STAT_RRDY (1 << 3) /* Receive data ready */
> -#define I2C_STAT_ARDY (1 << 2) /* Register access ready */
> -#define I2C_STAT_NACK (1 << 1) /* No acknowledgment interrupt enable */
> -#define I2C_STAT_AL (1 << 0) /* Arbitration lost interrupt enable */
> -
> -
> -/* I2C Interrupt Code Register (I2C_INTCODE): */
> -
> -#define I2C_INTCODE_MASK 7
> -#define I2C_INTCODE_NONE 0
> -#define I2C_INTCODE_AL 1 /* Arbitration lost */
> -#define I2C_INTCODE_NAK 2 /* No acknowledgement/general call */
> -#define I2C_INTCODE_ARDY 3 /* Register access ready */
> -#define I2C_INTCODE_RRDY 4 /* Rcv data ready */
> -#define I2C_INTCODE_XRDY 5 /* Xmit data ready */
> -
> -/* I2C Buffer Configuration Register (I2C_BUF): */
> -
> -#define I2C_BUF_RDMA_EN (1 << 15) /* Receive DMA channel enable */
> -#define I2C_BUF_XDMA_EN (1 << 7) /* Transmit DMA channel enable */
> -
> -/* I2C Configuration Register (I2C_CON): */
> -
> -#define I2C_CON_EN (1 << 15) /* I2C module enable */
> -#define I2C_CON_BE (1 << 14) /* Big endian mode */
> -#define I2C_CON_STB (1 << 11) /* Start byte mode (master mode only) */
> -#define I2C_CON_MST (1 << 10) /* Master/slave mode */
> -#define I2C_CON_TRX (1 << 9) /* Transmitter/receiver mode (master mode only) */
> -#define I2C_CON_XA (1 << 8) /* Expand address */
> -#define I2C_CON_STP (1 << 1) /* Stop condition (master mode only) */
> -#define I2C_CON_STT (1 << 0) /* Start condition (master mode only) */
> -
> -/* I2C System Test Register (I2C_SYSTEST): */
> -
> -#define I2C_SYSTEST_ST_EN (1 << 15) /* System test enable */
> -#define I2C_SYSTEST_FREE (1 << 14) /* Free running mode (on breakpoint) */
> -#define I2C_SYSTEST_TMODE_MASK (3 << 12) /* Test mode select */
> -#define I2C_SYSTEST_TMODE_SHIFT (12) /* Test mode select */
> -#define I2C_SYSTEST_SCL_I (1 << 3) /* SCL line sense input value */
> -#define I2C_SYSTEST_SCL_O (1 << 2) /* SCL line drive output value */
> -#define I2C_SYSTEST_SDA_I (1 << 1) /* SDA line sense input value */
> -#define I2C_SYSTEST_SDA_O (1 << 0) /* SDA line drive output value */
> -
> -/* These values were copied from omap3, include/asm-arm/arch-omap3/i2c.h. */
> -#define OMAP_I2C_STANDARD 100000
> -#define OMAP_I2C_FAST_MODE 400000
> -#define OMAP_I2C_HIGH_SPEED 3400000
> -
> -#define SYSTEM_CLOCK_12 12000000
> -#define SYSTEM_CLOCK_13 13000000
> -#define SYSTEM_CLOCK_192 19200000
> -#define SYSTEM_CLOCK_96 96000000
> -
> -#ifndef I2C_IP_CLK
> -#define I2C_IP_CLK SYSTEM_CLOCK_96
> -#endif
> -
> -#ifndef I2C_INTERNAL_SAMPLING_CLK
> -#define I2C_INTERNAL_SAMPLING_CLK 19200000
> -#endif
> -
> -/* These are the trim values for standard and fast speed */
> -#ifndef I2C_FASTSPEED_SCLL_TRIM
> -#define I2C_FASTSPEED_SCLL_TRIM 6
> -#endif
> -#ifndef I2C_FASTSPEED_SCLH_TRIM
> -#define I2C_FASTSPEED_SCLH_TRIM 6
> -#endif
> -
> -/* These are the trim values for high speed */
> -#ifndef I2C_HIGHSPEED_PHASE_ONE_SCLL_TRIM
> -#define I2C_HIGHSPEED_PHASE_ONE_SCLL_TRIM I2C_FASTSPEED_SCLL_TRIM
> -#endif
> -#ifndef I2C_HIGHSPEED_PHASE_ONE_SCLH_TRIM
> -#define I2C_HIGHSPEED_PHASE_ONE_SCLH_TRIM I2C_FASTSPEED_SCLH_TRIM
> -#endif
> -#ifndef I2C_HIGHSPEED_PHASE_TWO_SCLL_TRIM
> -#define I2C_HIGHSPEED_PHASE_TWO_SCLL_TRIM I2C_FASTSPEED_SCLL_TRIM
> -#endif
> -#ifndef I2C_HIGHSPEED_PHASE_TWO_SCLH_TRIM
> -#define I2C_HIGHSPEED_PHASE_TWO_SCLH_TRIM I2C_FASTSPEED_SCLH_TRIM
> -#endif
> -
> -#define I2C_PSC_MAX 0x0f
> -#define I2C_PSC_MIN 0x00
> -
> -
> #endif
^ permalink raw reply [flat|nested] 11+ messages in thread
* [U-Boot] Pull request: u-boot-i2c
2010-08-19 3:28 ` Steve Sakoman
@ 2010-08-23 6:29 ` Heiko Schocher
2010-08-26 6:37 ` [U-Boot] Pull request v2: u-boot-i2c Heiko Schocher
0 siblings, 1 reply; 11+ messages in thread
From: Heiko Schocher @ 2010-08-23 6:29 UTC (permalink / raw)
To: u-boot
Hello Wolfgang,
The following changes since commit bd2313078114c4b44c4a5ce149af43bcb7fc8854:
Wolfgang Denk (1):
Merge branch 'master' of ssh://gemini/home/wd/git/u-boot/master
are available in the git repository at:
git://git.denx.de/u-boot-i2c.git master
Nishanth Menon (3):
i2c: omap2+: change header guard to be generic
omap2: i2c: add syss offset
omap2: i2c: remove redundant header definitions
arch/arm/include/asm/arch-omap24xx/i2c.h | 110 +-----------------------------
drivers/i2c/omap24xx_i2c.h | 4 +-
2 files changed, 5 insertions(+), 109 deletions(-)
bye
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
^ permalink raw reply [flat|nested] 11+ messages in thread
* [U-Boot] Pull request v2: u-boot-i2c
2010-08-23 6:29 ` [U-Boot] Pull request: u-boot-i2c Heiko Schocher
@ 2010-08-26 6:37 ` Heiko Schocher
2010-09-07 19:39 ` Wolfgang Denk
0 siblings, 1 reply; 11+ messages in thread
From: Heiko Schocher @ 2010-08-26 6:37 UTC (permalink / raw)
To: u-boot
Hello Wolfgang,
The following changes since commit bd2313078114c4b44c4a5ce149af43bcb7fc8854:
Wolfgang Denk (1):
Merge branch 'master' of ssh://gemini/home/wd/git/u-boot/master
are available in the git repository at:
git://git.denx.de/u-boot-i2c.git master
Nishanth Menon (3):
i2c: omap2+: change header guard to be generic
omap2: i2c: add syss offset
omap2: i2c: remove redundant header definitions
Reinhard Meyer (1):
CMD_I2C: make alen=0 work
arch/arm/include/asm/arch-omap24xx/i2c.h | 110 +-----------------------------
common/cmd_i2c.c | 17 ++---
drivers/i2c/omap24xx_i2c.h | 4 +-
3 files changed, 12 insertions(+), 119 deletions(-)
bye
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
^ permalink raw reply [flat|nested] 11+ messages in thread
* [U-Boot] Pull request v2: u-boot-i2c
2010-08-26 6:37 ` [U-Boot] Pull request v2: u-boot-i2c Heiko Schocher
@ 2010-09-07 19:39 ` Wolfgang Denk
0 siblings, 0 replies; 11+ messages in thread
From: Wolfgang Denk @ 2010-09-07 19:39 UTC (permalink / raw)
To: u-boot
Dear Heiko Schocher,
In message <4C760BA5.90901@denx.de> you wrote:
> Hello Wolfgang,
>
> The following changes since commit bd2313078114c4b44c4a5ce149af43bcb7fc8854:
> Wolfgang Denk (1):
> Merge branch 'master' of ssh://gemini/home/wd/git/u-boot/master
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-i2c.git master
>
> Nishanth Menon (3):
> i2c: omap2+: change header guard to be generic
> omap2: i2c: add syss offset
> omap2: i2c: remove redundant header definitions
>
> Reinhard Meyer (1):
> CMD_I2C: make alen=0 work
>
> arch/arm/include/asm/arch-omap24xx/i2c.h | 110 +-----------------------------
> common/cmd_i2c.c | 17 ++---
> drivers/i2c/omap24xx_i2c.h | 4 +-
> 3 files changed, 12 insertions(+), 119 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
For every complex problem, there is a solution that is simple, neat,
and wrong. -- H. L. Mencken
^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2010-09-07 19:39 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <Commit d708395d breaks omap2420h4 board...>
2010-08-19 0:39 ` [U-Boot] [PATCH 0/3] omap2: i2c: minor cleanup Nishanth Menon
2010-08-19 3:28 ` Steve Sakoman
2010-08-23 6:29 ` [U-Boot] Pull request: u-boot-i2c Heiko Schocher
2010-08-26 6:37 ` [U-Boot] Pull request v2: u-boot-i2c Heiko Schocher
2010-09-07 19:39 ` Wolfgang Denk
2010-08-19 0:39 ` [U-Boot] [PATCH 1/3] i2c: omap2+: change header guard to be generic Nishanth Menon
2010-08-19 3:29 ` Steve Sakoman
2010-08-19 0:39 ` [U-Boot] [PATCH 2/3] omap2: i2c: add syss offset Nishanth Menon
2010-08-19 3:28 ` Steve Sakoman
2010-08-19 0:39 ` [U-Boot] [PATCH 3/3] omap2: i2c: remove redundant header definitions Nishanth Menon
2010-08-19 3:30 ` Steve Sakoman
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.