From: Daniel Vetter <daniel.vetter@ffwll.ch>
To: intel-gfx@lists.freedesktop.org
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Subject: [PATCH 07/23] intel-gtt: generic intel_fake_agp_fetch_size
Date: Wed, 1 Sep 2010 22:29:54 +0200 [thread overview]
Message-ID: <1283373010-1314-8-git-send-email-daniel.vetter@ffwll.ch> (raw)
In-Reply-To: <1283373010-1314-1-git-send-email-daniel.vetter@ffwll.ch>
This uses the new mappable gtt size detection from the previous patch.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
drivers/char/agp/intel-gtt.c | 77 +++++++++++++-----------------------------
1 files changed, 24 insertions(+), 53 deletions(-)
diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c
index 33d8460..e5ba9a4 100644
--- a/drivers/char/agp/intel-gtt.c
+++ b/drivers/char/agp/intel-gtt.c
@@ -790,6 +790,25 @@ static int intel_gtt_init(void)
return 0;
}
+static int intel_fake_agp_fetch_size(void)
+{
+ unsigned int aper_size;
+ int i;
+ int num_sizes = ARRAY_SIZE(intel_i830_sizes);
+
+ aper_size = (intel_private.base.gtt_mappable_entries << PAGE_SHIFT)
+ / MB(1);
+
+ for (i = 0; i < num_sizes; i++) {
+ if (aper_size == intel_i830_sizes[i].size) {
+ agp_bridge->current_size = intel_i830_sizes + i;
+ return aper_size;
+ }
+ }
+
+ return 0;
+}
+
static void intel_i830_fini_flush(void)
{
kunmap(intel_private.i8xx_page);
@@ -881,36 +900,6 @@ static int intel_i830_free_gatt_table(struct agp_bridge_data *bridge)
return 0;
}
-static int intel_i830_fetch_size(void)
-{
- u16 gmch_ctrl;
- struct aper_size_info_fixed *values;
-
- values = A_SIZE_FIX(agp_bridge->driver->aperture_sizes);
-
- if (intel_private.bridge_dev->device != PCI_DEVICE_ID_INTEL_82830_HB &&
- intel_private.bridge_dev->device != PCI_DEVICE_ID_INTEL_82845G_HB) {
- /* 855GM/852GM/865G has 128MB aperture size */
- agp_bridge->current_size = (void *) values;
- agp_bridge->aperture_size_idx = 0;
- return values[0].size;
- }
-
- pci_read_config_word(intel_private.bridge_dev, I830_GMCH_CTRL, &gmch_ctrl);
-
- if ((gmch_ctrl & I830_GMCH_MEM_MASK) == I830_GMCH_MEM_128M) {
- agp_bridge->current_size = (void *) values;
- agp_bridge->aperture_size_idx = 0;
- return values[0].size;
- } else {
- agp_bridge->current_size = (void *) (values + 1);
- agp_bridge->aperture_size_idx = 1;
- return values[1].size;
- }
-
- return 0;
-}
-
static int intel_i830_configure(void)
{
struct aper_size_info_fixed *current_size;
@@ -1258,24 +1247,6 @@ static int intel_i915_remove_entries(struct agp_memory *mem, off_t pg_start,
* described in the spec of the MSAC registers is just changing of the
* resource size.
*/
-static int intel_i9xx_fetch_size(void)
-{
- int num_sizes = ARRAY_SIZE(intel_i830_sizes);
- int aper_size; /* size in megabytes */
- int i;
-
- aper_size = pci_resource_len(intel_private.pcidev, 2) / MB(1);
-
- for (i = 0; i < num_sizes; i++) {
- if (aper_size == intel_i830_sizes[i].size) {
- agp_bridge->current_size = intel_i830_sizes + i;
- return aper_size;
- }
- }
-
- return 0;
-}
-
static int intel_i915_get_gtt_size(void)
{
int size;
@@ -1516,7 +1487,7 @@ static const struct agp_bridge_driver intel_830_driver = {
.num_aperture_sizes = 4,
.needs_scratch_page = true,
.configure = intel_i830_configure,
- .fetch_size = intel_i830_fetch_size,
+ .fetch_size = intel_fake_agp_fetch_size,
.cleanup = intel_i830_cleanup,
.mask_memory = intel_i810_mask_memory,
.masks = intel_i810_masks,
@@ -1543,7 +1514,7 @@ static const struct agp_bridge_driver intel_915_driver = {
.num_aperture_sizes = 4,
.needs_scratch_page = true,
.configure = intel_i9xx_configure,
- .fetch_size = intel_i9xx_fetch_size,
+ .fetch_size = intel_fake_agp_fetch_size,
.cleanup = intel_i915_cleanup,
.mask_memory = intel_i810_mask_memory,
.masks = intel_i810_masks,
@@ -1576,7 +1547,7 @@ static const struct agp_bridge_driver intel_i965_driver = {
.num_aperture_sizes = 4,
.needs_scratch_page = true,
.configure = intel_i9xx_configure,
- .fetch_size = intel_i9xx_fetch_size,
+ .fetch_size = intel_fake_agp_fetch_size,
.cleanup = intel_i915_cleanup,
.mask_memory = intel_i965_mask_memory,
.masks = intel_i810_masks,
@@ -1609,7 +1580,7 @@ static const struct agp_bridge_driver intel_gen6_driver = {
.num_aperture_sizes = 4,
.needs_scratch_page = true,
.configure = intel_i9xx_configure,
- .fetch_size = intel_i9xx_fetch_size,
+ .fetch_size = intel_fake_agp_fetch_size,
.cleanup = intel_i915_cleanup,
.mask_memory = intel_gen6_mask_memory,
.masks = intel_i810_masks,
@@ -1642,7 +1613,7 @@ static const struct agp_bridge_driver intel_g33_driver = {
.num_aperture_sizes = 4,
.needs_scratch_page = true,
.configure = intel_i9xx_configure,
- .fetch_size = intel_i9xx_fetch_size,
+ .fetch_size = intel_fake_agp_fetch_size,
.cleanup = intel_i915_cleanup,
.mask_memory = intel_i965_mask_memory,
.masks = intel_i810_masks,
--
1.7.2.2
next prev parent reply other threads:[~2010-09-01 20:28 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-09-01 20:29 [PATCH 00/23] intel gtt rework, part 1: initialization Daniel Vetter
2010-09-01 20:29 ` [PATCH 01/23] agp/intel: split out gmch/gtt probe, part 2 Daniel Vetter
2010-09-01 20:29 ` [PATCH 02/23] agp/intel: make intel-gtt.c into a real source file Daniel Vetter
2010-09-01 20:29 ` [PATCH 03/23] intel-gtt: introduce drm/intel-gtt.h Daniel Vetter
2010-09-01 20:29 ` [PATCH 04/23] intel-gtt: store a local pointer to the bridge pci dev Daniel Vetter
2010-09-01 20:29 ` [PATCH 05/23] intel-gtt: s/intel_i830_init_gtt_entries/intel_gtt_stolen_entries Daniel Vetter
2010-09-01 20:29 ` [PATCH 06/23] intel-gtt: new function intel_gtt_mappable_entries Daniel Vetter
2010-09-01 20:29 ` Daniel Vetter [this message]
2010-09-01 20:29 ` [PATCH 08/23] intel-gtt: sane variable names for intel_gtt_stolen_entries Daniel Vetter
2010-09-01 20:29 ` [PATCH 09/23] intel-gtt: drop unnecessary conditions in intel_gtt_stolen_entries Daniel Vetter
2010-09-01 20:29 ` [PATCH 10/23] intel-gtt: adjust overhead entries " Daniel Vetter
2010-09-01 20:29 ` [PATCH 11/23] intel-gtt: s/i8[13]0/fake_agp for generic functions Daniel Vetter
2010-09-01 20:29 ` [PATCH 12/23] intel-gtt: fix gtt_total_entries detection Daniel Vetter
2010-09-01 20:30 ` [PATCH 13/23] intel-gtt: introduce intel_gtt_driver Daniel Vetter
2010-09-01 20:30 ` [PATCH 14/23] intel-gtt: i915: use detected gtt size for mapping Daniel Vetter
2010-09-01 20:30 ` [PATCH 15/23] intel-gtt: i965: " Daniel Vetter
2010-09-01 20:30 ` [PATCH 16/23] intel-gtt: i830: adjust ioremap of regs and gtt to i9xx Daniel Vetter
2010-09-01 20:30 ` [PATCH 17/23] intel-gtt: consolidate the gtt ioremap calls Daniel Vetter
2010-09-01 20:30 ` [PATCH 18/23] intel-gtt: consolidate i830 setup Daniel Vetter
2010-09-01 20:30 ` [PATCH 19/23] intel-gtt: consolidate i9xx setup Daniel Vetter
2010-09-01 20:30 ` [PATCH 20/23] intel-gtt: call init_gtt_init in probe function Daniel Vetter
2010-09-01 20:30 ` [PATCH 21/23] intel-gtt: use chipset generation number some more Daniel Vetter
2010-09-01 20:30 ` [PATCH 22/23] drm/i915: drop prealloc_start from i915_dma.c gtt init Daniel Vetter
2010-09-01 20:30 ` [PATCH 23/23] drm/i915: die, i915_probe_agp, die Daniel Vetter
2010-09-05 16:10 ` Chris Wilson
2010-09-02 1:19 ` [PATCH 00/23] intel gtt rework, part 1: initialization Dave Airlie
2010-09-02 11:20 ` Chris Wilson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1283373010-1314-8-git-send-email-daniel.vetter@ffwll.ch \
--to=daniel.vetter@ffwll.ch \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.