[U-Boot] [PATCH v2 0/6] Add ARM flat device tree support

[U-Boot] [PATCH v2 0/6] Add ARM flat device tree support

[John Rigby]

This is the third submission of this patch series.  The first
was an RFC and I received lots of comments that I addressed
in the second for which I got no feedback.

This version fixes some issues I found in testing on a hacked
Beagle kernel with enough device tree functionality to verify
that u-boot is able to pass a device tree.

Patch summary:
 1-4 are fixes/clean up to existing code
 3 needs testing on nios and microblaze
 5 actually adds the ARM FDT support 
 6 enables FDT support for omap3_beagle
 
John Rigby (6):
  fdt_relocate: fix fdt size and endian bugs
  FDT: Add fixup support for multiple banks of memory
  FDT: only call boot_get_fdt from generic code
  boot: change some arch ifdefs to feature ifdefs
  ARM: add flat device tree support
  ARM: enable device tree for beagle

 arch/arm/include/asm/config.h     |    2 +
 arch/arm/lib/bootm.c              |  137 ++++++++++++++++++++++++++++++++----
 arch/m68k/include/asm/config.h    |    3 +
 arch/microblaze/lib/bootm.c       |   12 +---
 arch/nios2/lib/bootm.c            |    8 +--
 arch/powerpc/include/asm/config.h |    3 +
 arch/sparc/include/asm/config.h   |    1 +
 common/cmd_bootm.c                |    4 +-
 common/fdt_support.c              |   86 ++++++++++++-----------
 common/image.c                    |   18 +++--
 include/configs/omap3_beagle.h    |    9 +++
 include/fdt_support.h             |    1 +
 include/image.h                   |    9 ++-
 13 files changed, 210 insertions(+), 83 deletions(-)

[U-Boot] [PATCH v2 1/6] fdt_relocate: fix fdt size and endian bugs

[John Rigby]

Fix two problems in fdt_relocate.

First, for the non relocation case current code calculates
fdt blob size by subtracting the fdt address from the end
of bootmap.  This wrong because it assumes that the fdt_blob
is located at the top (high) of the bootmap.  Use the current
size plus padding instead.  For example if the blob is at
the beginning of bootmap then the calculated size will be
the size of the entire bootmapped area.

Second, fdt_relocate returns bad size info on little endian
platforms because it calls be32_to_cpu on the value returned
by fdt_totalsize.  This is wrong because the value returned
by fdt_totalsize is already cpu endian.

Signed-off-by: John Rigby <john.rigby@linaro.org>
---
 common/image.c |    6 +++---
 1 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/common/image.c b/common/image.c
index 3a2f25e..4aec9d6 100644
--- a/common/image.c
+++ b/common/image.c
@@ -1252,7 +1252,7 @@ int boot_relocate_fdt (struct lmb *lmb, ulong bootmap_base,
 		*of_size = of_len;
 	} else {
 		*of_flat_tree = fdt_blob;
-		of_len = (CONFIG_SYS_BOOTMAPSZ + bootmap_base) - (ulong)fdt_blob;
+		of_len = *of_size + (unsigned)CONFIG_SYS_FDT_PAD;
 		lmb_reserve(lmb, (ulong)fdt_blob, of_len);
 		fdt_set_totalsize(*of_flat_tree, of_len);
 
@@ -1561,7 +1561,7 @@ int boot_get_fdt (int flag, int argc, char * const argv[], bootm_headers_t *imag
 				goto error;
 			}
 
-			if (be32_to_cpu (fdt_totalsize (fdt_blob)) != fdt_len) {
+			if (fdt_totalsize(fdt_blob) != fdt_len) {
 				fdt_error ("fdt size != image size");
 				goto error;
 			}
@@ -1575,7 +1575,7 @@ int boot_get_fdt (int flag, int argc, char * const argv[], bootm_headers_t *imag
 	}
 
 	*of_flat_tree = fdt_blob;
-	*of_size = be32_to_cpu (fdt_totalsize (fdt_blob));
+	*of_size = fdt_totalsize(fdt_blob);
 	debug ("   of_flat_tree at 0x%08lx size 0x%08lx\n",
 			(ulong)*of_flat_tree, *of_size);
 
-- 
1.7.0.4

[U-Boot] [PATCH v2 2/6] FDT: Add fixup support for multiple banks of memory

[John Rigby]

Add fdt_fixup_memory_banks and reimplement fdt_fixup_memory
using it.

Signed-off-by: John Rigby <john.rigby@linaro.org>
---
 common/fdt_support.c  |   86 ++++++++++++++++++++++++++-----------------------
 include/fdt_support.h |    1 +
 2 files changed, 47 insertions(+), 40 deletions(-)

diff --git a/common/fdt_support.c b/common/fdt_support.c
index 6f32e3f..c8a45f9 100644
--- a/common/fdt_support.c
+++ b/common/fdt_support.c
@@ -362,10 +362,40 @@ void do_fixup_by_compat_u32(void *fdt, const char *compat,
 	do_fixup_by_compat(fdt, compat, prop, &val, 4, create);
 }
 
-int fdt_fixup_memory(void *blob, u64 start, u64 size)
+/*
+ * Get cells len in bytes
+ *     if #NNNN-cells property is 2 then len is 8
+ *     otherwise len is 4
+ */
+static int get_cells_len(void *blob, char *nr_cells_name)
+{
+	const u32 *cell;
+
+	cell = fdt_getprop(blob, 0, nr_cells_name, NULL);
+	if (cell && *cell == 2)
+		return 8;
+
+	return 4;
+}
+
+/*
+ * Write a 4 or 8 byte big endian cell
+ */
+static void write_cell(u8 *addr, u64 val, int size)
 {
-	int err, nodeoffset, len = 0;
-	u8 tmp[16];
+	int shift = (size - 1) * 8;
+	while (size-- > 0) {
+		*addr++ = (val >> shift) & 0xff;
+		shift -= 8;
+	}
+}
+
+int fdt_fixup_memory_banks(void *blob, u64 start[], u64 size[], int banks)
+{
+	int err, nodeoffset;
+	int addr_cell_len, size_cell_len, len;
+	u8 tmp[banks * 8];
+	int bank;
 	const u32 *addrcell, *sizecell;
 
 	err = fdt_check_header(blob);
@@ -391,44 +421,15 @@ int fdt_fixup_memory(void *blob, u64 start, u64 size)
 		return err;
 	}
 
-	addrcell = fdt_getprop(blob, 0, "#address-cells", NULL);
-	/* use shifts and mask to ensure endianness */
-	if ((addrcell) && (*addrcell == 2)) {
-		tmp[0] = (start >> 56) & 0xff;
-		tmp[1] = (start >> 48) & 0xff;
-		tmp[2] = (start >> 40) & 0xff;
-		tmp[3] = (start >> 32) & 0xff;
-		tmp[4] = (start >> 24) & 0xff;
-		tmp[5] = (start >> 16) & 0xff;
-		tmp[6] = (start >>  8) & 0xff;
-		tmp[7] = (start      ) & 0xff;
-		len = 8;
-	} else {
-		tmp[0] = (start >> 24) & 0xff;
-		tmp[1] = (start >> 16) & 0xff;
-		tmp[2] = (start >>  8) & 0xff;
-		tmp[3] = (start      ) & 0xff;
-		len = 4;
-	}
+	addr_cell_len = get_cells_len(blob, "#address-cells");
+	size_cell_len = get_cells_len(blob, "#size-cells");
 
-	sizecell = fdt_getprop(blob, 0, "#size-cells", NULL);
-	/* use shifts and mask to ensure endianness */
-	if ((sizecell) && (*sizecell == 2)) {
-		tmp[0+len] = (size >> 56) & 0xff;
-		tmp[1+len] = (size >> 48) & 0xff;
-		tmp[2+len] = (size >> 40) & 0xff;
-		tmp[3+len] = (size >> 32) & 0xff;
-		tmp[4+len] = (size >> 24) & 0xff;
-		tmp[5+len] = (size >> 16) & 0xff;
-		tmp[6+len] = (size >>  8) & 0xff;
-		tmp[7+len] = (size      ) & 0xff;
-		len += 8;
-	} else {
-		tmp[0+len] = (size >> 24) & 0xff;
-		tmp[1+len] = (size >> 16) & 0xff;
-		tmp[2+len] = (size >>  8) & 0xff;
-		tmp[3+len] = (size      ) & 0xff;
-		len += 4;
+	for (bank = 0, len = 0; bank < banks; bank++) {
+		write_cell(tmp + len, start[bank], addr_cell_len);
+		len += addr_cell_len;
+
+		write_cell(tmp + len, size[bank], size_cell_len);
+		len += size_cell_len;
 	}
 
 	err = fdt_setprop(blob, nodeoffset, "reg", tmp, len);
@@ -440,6 +441,11 @@ int fdt_fixup_memory(void *blob, u64 start, u64 size)
 	return 0;
 }
 
+int fdt_fixup_memory(void *blob, u64 start, u64 size)
+{
+	return fdt_fixup_memory_banks(blob, &start, &size, 1);
+}
+
 void fdt_fixup_ethernet(void *fdt)
 {
 	int node, i, j;
diff --git a/include/fdt_support.h b/include/fdt_support.h
index fd94929..7457121 100644
--- a/include/fdt_support.h
+++ b/include/fdt_support.h
@@ -48,6 +48,7 @@ void do_fixup_by_compat(void *fdt, const char *compat,
 void do_fixup_by_compat_u32(void *fdt, const char *compat,
 			    const char *prop, u32 val, int create);
 int fdt_fixup_memory(void *blob, u64 start, u64 size);
+int fdt_fixup_memory_banks(void *blob, u64 start[], u64 size[], int banks);
 void fdt_fixup_ethernet(void *fdt);
 int fdt_find_and_setprop(void *fdt, const char *node, const char *prop,
 			 const void *val, int len, int create);
-- 
1.7.0.4

[U-Boot] [PATCH v2 3/6] FDT: only call boot_get_fdt from generic code

[John Rigby]

All arches except nios2 and microblaze call boot_get_fdt
from bootm_start in common/cmd_bootm.c.

Having nios2 and microblaze do so as well removes code from
their respective do_bootm_linux routines and allows removal of
a nasty ifdef from bootm_start.

Signed-off-by: John Rigby <john.rigby@linaro.org>
CC: Scott McNutt <smcnutt@psyent.com>
CC: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/lib/bootm.c |   12 +++---------
 arch/nios2/lib/bootm.c      |    8 +++-----
 common/cmd_bootm.c          |    2 --
 3 files changed, 6 insertions(+), 16 deletions(-)

diff --git a/arch/microblaze/lib/bootm.c b/arch/microblaze/lib/bootm.c
index 8e2c6d8..25f63d9 100644
--- a/arch/microblaze/lib/bootm.c
+++ b/arch/microblaze/lib/bootm.c
@@ -46,12 +46,9 @@ int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *ima
 
 	char	*of_flat_tree = NULL;
 #if defined(CONFIG_OF_LIBFDT)
-	ulong	of_size = 0;
-
-	/* find flattened device tree */
-	ret = boot_get_fdt (flag, argc, argv, images, &of_flat_tree, &of_size);
-	if (ret)
-		return 1;
+	/* did generic code already find a device tree? */
+	if (images->ft_len)
+		of_flat_tree = images->ft_addr;
 #endif
 
 	theKernel = (void (*)(char *, ulong, ulong))images->ep;
@@ -64,9 +61,6 @@ int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *ima
 
 	show_boot_progress (15);
 
-	if (!(ulong) of_flat_tree)
-		of_flat_tree = (char *)simple_strtoul (argv[3], NULL, 16);
-
 #ifdef DEBUG
 	printf ("## Transferring control to Linux (at address 0x%08lx) " \
 				"ramdisk 0x%08lx, FDT 0x%08lx...\n",
diff --git a/arch/nios2/lib/bootm.c b/arch/nios2/lib/bootm.c
index 40a4d15..f32be52 100644
--- a/arch/nios2/lib/bootm.c
+++ b/arch/nios2/lib/bootm.c
@@ -36,11 +36,9 @@ int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *ima
 	ulong initrd_end = images->rd_end;
 	char *of_flat_tree = NULL;
 #if defined(CONFIG_OF_LIBFDT)
-	ulong of_size = 0;
-
-	/* find flattened device tree */
-	if (boot_get_fdt(flag, argc, argv, images, &of_flat_tree, &of_size))
-		return 1;
+	/* did generic code already find a device tree? */
+	if (images->ft_len)
+		of_flat_tree = images->ft_addr;
 #endif
 	if (!of_flat_tree && argc > 3)
 		of_flat_tree = (char *)simple_strtoul(argv[3], NULL, 16);
diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c
index db59e6f..25bc39c 100644
--- a/common/cmd_bootm.c
+++ b/common/cmd_bootm.c
@@ -308,7 +308,6 @@ static int bootm_start(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]
 		}
 
 #if defined(CONFIG_OF_LIBFDT)
-#if defined(CONFIG_PPC) || defined(CONFIG_M68K) || defined(CONFIG_SPARC)
 		/* find flattened device tree */
 		ret = boot_get_fdt (flag, argc, argv, &images,
 				    &images.ft_addr, &images.ft_len);
@@ -319,7 +318,6 @@ static int bootm_start(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]
 
 		set_working_fdt_addr(images.ft_addr);
 #endif
-#endif
 	}
 
 	images.os.start = (ulong)os_hdr;
-- 
1.7.0.4

[U-Boot] [PATCH v2 4/6] boot: change some arch ifdefs to feature ifdefs

[John Rigby]

The routines boot_ramdisk_high, boot_get_cmdline and boot_get_kbd
are currently enabled by various combinations of CONFIG_M68K,
CONFIG_POWERPC and CONFIG_SPARC.

Use CONFIG_<FEATURE> defines instead.

CONFIG_BOOT_RAMDISK_HIGH
CONFIG_BOOT_GET_CMDLINE
CONFIG_BOOT_GET_KBD

Define these as appropriate in arch/include/asm/config.h files.

Signed-off-by: John Rigby <john.rigby@linaro.org>
---
 arch/m68k/include/asm/config.h    |    3 +++
 arch/powerpc/include/asm/config.h |    3 +++
 arch/sparc/include/asm/config.h   |    1 +
 common/cmd_bootm.c                |    2 +-
 common/image.c                    |   10 ++++++----
 include/image.h                   |    9 ++++++---
 6 files changed, 20 insertions(+), 8 deletions(-)

diff --git a/arch/m68k/include/asm/config.h b/arch/m68k/include/asm/config.h
index 36438be..1fbdf0a 100644
--- a/arch/m68k/include/asm/config.h
+++ b/arch/m68k/include/asm/config.h
@@ -22,5 +22,8 @@
 #define _ASM_CONFIG_H_
 
 #define CONFIG_LMB
+#define CONFIG_BOOT_RAMDISK_HIGH
+#define CONFIG_BOOT_GET_CMDLINE
+#define CONFIG_BOOT_GET_KBD
 
 #endif
diff --git a/arch/powerpc/include/asm/config.h b/arch/powerpc/include/asm/config.h
index d098657..788f27d 100644
--- a/arch/powerpc/include/asm/config.h
+++ b/arch/powerpc/include/asm/config.h
@@ -22,6 +22,9 @@
 #define _ASM_CONFIG_H_
 
 #define CONFIG_LMB
+#define CONFIG_BOOT_RAMDISK_HIGH
+#define CONFIG_BOOT_GET_CMDLINE
+#define CONFIG_BOOT_GET_KBD
 
 #ifndef CONFIG_MAX_MEM_MAPPED
 #if defined(CONFIG_4xx) || defined(CONFIG_E500) || defined(CONFIG_MPC86xx)
diff --git a/arch/sparc/include/asm/config.h b/arch/sparc/include/asm/config.h
index 36438be..b072771 100644
--- a/arch/sparc/include/asm/config.h
+++ b/arch/sparc/include/asm/config.h
@@ -22,5 +22,6 @@
 #define _ASM_CONFIG_H_
 
 #define CONFIG_LMB
+#define CONFIG_BOOT_RAMDISK_HIGH
 
 #endif
diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c
index 25bc39c..e78896f 100644
--- a/common/cmd_bootm.c
+++ b/common/cmd_bootm.c
@@ -528,7 +528,7 @@ int do_bootm_subcommand (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv
 			lmb_reserve(&images.lmb, images.os.load,
 					(load_end - images.os.load));
 			break;
-#if defined(CONFIG_PPC) || defined(CONFIG_M68K) || defined(CONFIG_SPARC)
+#ifdef CONFIG_BOOT_RAMDISK_HIGH
 		case BOOTM_STATE_RAMDISK:
 		{
 			ulong rd_len = images.rd_end - images.rd_start;
diff --git a/common/image.c b/common/image.c
index 4aec9d6..0562e3b 100644
--- a/common/image.c
+++ b/common/image.c
@@ -992,7 +992,7 @@ int boot_get_ramdisk (int argc, char * const argv[], bootm_headers_t *images,
 	return 0;
 }
 
-#if defined(CONFIG_PPC) || defined(CONFIG_M68K) || defined(CONFIG_SPARC)
+#ifdef CONFIG_BOOT_RAMDISK_HIGH
 /**
  * boot_ramdisk_high - relocate init ramdisk
  * @lmb: pointer to lmb handle, will be used for memory mgmt
@@ -1081,7 +1081,7 @@ int boot_ramdisk_high (struct lmb *lmb, ulong rd_data, ulong rd_len,
 error:
 	return -1;
 }
-#endif /* defined(CONFIG_PPC) || defined(CONFIG_M68K) || defined(CONFIG_SPARC) */
+#endif /* CONFIG_BOOT_RAMDISK_HIGH */
 
 #ifdef CONFIG_OF_LIBFDT
 static void fdt_error (const char *msg)
@@ -1588,7 +1588,7 @@ error:
 }
 #endif /* CONFIG_OF_LIBFDT */
 
-#if defined(CONFIG_PPC) || defined(CONFIG_M68K)
+#ifdef CONFIG_BOOT_GET_CMDLINE
 /**
  * boot_get_cmdline - allocate and initialize kernel cmdline
  * @lmb: pointer to lmb handle, will be used for memory mgmt
@@ -1630,7 +1630,9 @@ int boot_get_cmdline (struct lmb *lmb, ulong *cmd_start, ulong *cmd_end,
 
 	return 0;
 }
+#endif /* CONFIG_BOOT_GET_CMDLINE */
 
+#ifdef CONFIG_BOOT_GET_KBD
 /**
  * boot_get_kbd - allocate and initialize kernel copy of board info
  * @lmb: pointer to lmb handle, will be used for memory mgmt
@@ -1663,7 +1665,7 @@ int boot_get_kbd (struct lmb *lmb, bd_t **kbd, ulong bootmap_base)
 
 	return 0;
 }
-#endif /* CONFIG_PPC || CONFIG_M68K */
+#endif /* CONFIG_BOOT_GET_KBD */
 #endif /* !USE_HOSTCC */
 
 #if defined(CONFIG_FIT)
diff --git a/include/image.h b/include/image.h
index 18a9f0e..5983a98 100644
--- a/include/image.h
+++ b/include/image.h
@@ -340,14 +340,17 @@ int boot_relocate_fdt (struct lmb *lmb, ulong bootmap_base,
 		char **of_flat_tree, ulong *of_size);
 #endif
 
-#if defined(CONFIG_PPC) || defined(CONFIG_M68K)
+#ifdef CONFIG_BOOT_RAMDISK_HIGH
 int boot_ramdisk_high (struct lmb *lmb, ulong rd_data, ulong rd_len,
 		  ulong *initrd_start, ulong *initrd_end);
-
+#endif /* CONFIG_BOOT_RAMDISK_HIGH */
+#ifdef CONFIG_BOOT_GET_CMDLINE
 int boot_get_cmdline (struct lmb *lmb, ulong *cmd_start, ulong *cmd_end,
 			ulong bootmap_base);
+#endif /* CONFIG_BOOT_GET_CMDLINE */
+#ifdef CONFIG_BOOT_GET_KBD
 int boot_get_kbd (struct lmb *lmb, bd_t **kbd, ulong bootmap_base);
-#endif /* CONFIG_PPC || CONFIG_M68K */
+#endif /* CONFIG_BOOT_GET_KBD */
 #endif /* !USE_HOSTCC */
 
 /*******************************************************************/
-- 
1.7.0.4

[U-Boot] [PATCH v2 5/6] ARM: add flat device tree support

[John Rigby]

Based on other architectures already supported.

Signed-off-by: John Rigby <john.rigby@linaro.org>
---
 arch/arm/include/asm/config.h |    2 +
 arch/arm/lib/bootm.c          |  137 ++++++++++++++++++++++++++++++++++++-----
 common/image.c                |    2 +
 3 files changed, 125 insertions(+), 16 deletions(-)

diff --git a/arch/arm/include/asm/config.h b/arch/arm/include/asm/config.h
index 4e8dfd7..d85a396 100644
--- a/arch/arm/include/asm/config.h
+++ b/arch/arm/include/asm/config.h
@@ -25,4 +25,6 @@
 /* Relocation to SDRAM works on all ARM boards */
 #define CONFIG_RELOC_FIXUP_WORKS
 #endif
+#define CONFIG_LMB
+#define CONFIG_BOOT_RAMDISK_HIGH
 #endif
diff --git a/arch/arm/lib/bootm.c b/arch/arm/lib/bootm.c
index 3101321..2e7b2e1 100644
--- a/arch/arm/lib/bootm.c
+++ b/arch/arm/lib/bootm.c
@@ -26,6 +26,9 @@
 #include <image.h>
 #include <u-boot/zlib.h>
 #include <asm/byteorder.h>
+#include <fdt.h>
+#include <libfdt.h>
+#include <fdt_support.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -50,12 +53,52 @@ static void setup_end_tag (bd_t *bd);
 static struct tag *params;
 #endif /* CONFIG_SETUP_MEMORY_TAGS || CONFIG_CMDLINE_TAG || CONFIG_INITRD_TAG */
 
-int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *images)
+static ulong get_sp(void);
+#if defined(CONFIG_OF_LIBFDT)
+static int bootm_linux_fdt(int machid, bootm_headers_t *images);
+#endif
+
+void arch_lmb_reserve(struct lmb *lmb)
+{
+	ulong sp;
+
+	/*
+	 * Booting a (Linux) kernel image
+	 *
+	 * Allocate space for command line and board info - the
+	 * address should be as high as possible within the reach of
+	 * the kernel (see CONFIG_SYS_BOOTMAPSZ settings), but in unused
+	 * memory, which means far enough below the current stack
+	 * pointer.
+	 */
+	sp = get_sp();
+	debug("## Current stack ends at 0x%08lx ", sp);
+
+	/* adjust sp by 1K to be safe */
+	sp -= 1024;
+	lmb_reserve(lmb, sp,
+		    gd->bd->bi_dram[0].start + gd->bd->bi_dram[0].size - sp);
+}
+
+static void announce_and_cleanup(void)
+{
+	printf("\nStarting kernel ...\n\n");
+
+#ifdef CONFIG_USB_DEVICE
+	{
+		extern void udc_disconnect(void);
+		udc_disconnect();
+	}
+#endif
+	cleanup_before_linux();
+}
+
+int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
 {
 	bd_t	*bd = gd->bd;
 	char	*s;
 	int	machid = bd->bi_arch_number;
-	void	(*theKernel)(int zero, int arch, uint params);
+	void	(*kernel_entry)(int zero, int arch, uint params);
 
 #ifdef CONFIG_CMDLINE_TAG
 	char *commandline = getenv ("bootargs");
@@ -64,8 +107,6 @@ int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *ima
 	if ((flag != 0) && (flag != BOOTM_STATE_OS_GO))
 		return 1;
 
-	theKernel = (void (*)(int, int, uint))images->ep;
-
 	s = getenv ("machid");
 	if (s) {
 		machid = simple_strtoul (s, NULL, 16);
@@ -74,8 +115,15 @@ int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *ima
 
 	show_boot_progress (15);
 
+#ifdef CONFIG_OF_LIBFDT
+	if (images->ft_len)
+		return bootm_linux_fdt(machid, images);
+#endif
+
+	kernel_entry = (void (*)(int, int, uint))images->ep;
+
 	debug ("## Transferring control to Linux (at address %08lx) ...\n",
-	       (ulong) theKernel);
+	       (ulong) kernel_entry);
 
 #if defined (CONFIG_SETUP_MEMORY_TAGS) || \
     defined (CONFIG_CMDLINE_TAG) || \
@@ -99,27 +147,76 @@ int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *ima
 	if (images->rd_start && images->rd_end)
 		setup_initrd_tag (bd, images->rd_start, images->rd_end);
 #endif
-	setup_end_tag (bd);
+	setup_end_tag(bd);
 #endif
 
-	/* we assume that the kernel is in place */
-	printf ("\nStarting kernel ...\n\n");
+	announce_and_cleanup();
 
-#ifdef CONFIG_USB_DEVICE
-	{
-		extern void udc_disconnect (void);
-		udc_disconnect ();
+	kernel_entry(0, machid, bd->bi_boot_params);
+	/* does not return */
+
+	return 1;
+}
+
+#if defined(CONFIG_OF_LIBFDT)
+static int fixup_memory_node(void *blob)
+{
+	bd_t	*bd = gd->bd;
+	int bank;
+	u64 start[CONFIG_NR_DRAM_BANKS];
+	u64 size[CONFIG_NR_DRAM_BANKS];
+
+	for (bank = 0; bank < CONFIG_NR_DRAM_BANKS; bank++) {
+		start[bank] = bd->bi_dram[bank].start;
+		size[bank] = bd->bi_dram[bank].size;
 	}
-#endif
 
-	cleanup_before_linux ();
+	return fdt_fixup_memory_banks(blob, start, size, CONFIG_NR_DRAM_BANKS);
+}
+
+static int bootm_linux_fdt(int machid, bootm_headers_t *images)
+{
+	ulong rd_len;
+	bd_t *bd = gd->bd;
+	char *s;
+	void (*kernel_entry)(int zero, int dt_machid, void *dtblob);
+	ulong bootmap_base = getenv_bootm_low();
+	ulong of_size = images->ft_len;
+	char **of_flat_tree = &images->ft_addr;
+	ulong *initrd_start = &images->initrd_start;
+	ulong *initrd_end = &images->initrd_end;
+	struct lmb *lmb = &images->lmb;
+	int ret;
+
+	kernel_entry = (void (*)(int, int, void *))images->ep;
+
+	rd_len = images->rd_end - images->rd_start;
+	ret = boot_ramdisk_high(lmb, images->rd_start, rd_len,
+				initrd_start, initrd_end);
+	if (ret)
+		return ret;
+
+	ret = boot_relocate_fdt(lmb, bootmap_base, of_flat_tree, &of_size);
+	if (ret)
+		return ret;
 
-	theKernel (0, machid, bd->bi_boot_params);
+	debug("## Transferring control to Linux (at address %08lx) ...\n",
+	       (ulong) kernel_entry);
+
+	fdt_chosen(*of_flat_tree, 1);
+
+	fixup_memory_node(*of_flat_tree);
+
+	fdt_initrd(*of_flat_tree, *initrd_start, *initrd_end, 1);
+
+	announce_and_cleanup();
+
+	kernel_entry(0, machid, *of_flat_tree);
 	/* does not return */
 
 	return 1;
 }
-
+#endif
 
 #if defined (CONFIG_SETUP_MEMORY_TAGS) || \
     defined (CONFIG_CMDLINE_TAG) || \
@@ -239,4 +336,12 @@ static void setup_end_tag (bd_t *bd)
 	params->hdr.size = 0;
 }
 
+static ulong get_sp(void)
+{
+	ulong ret;
+
+	asm("mov %0, sp" : "=r"(ret) : );
+	return ret;
+}
+
 #endif /* CONFIG_SETUP_MEMORY_TAGS || CONFIG_CMDLINE_TAG || CONFIG_INITRD_TAG */
diff --git a/common/image.c b/common/image.c
index 0562e3b..7b181cc 100644
--- a/common/image.c
+++ b/common/image.c
@@ -1214,9 +1214,11 @@ int boot_relocate_fdt (struct lmb *lmb, ulong bootmap_base,
 	if (fdt_blob < (char *)bootmap_base)
 		relocate = 1;
 
+#ifdef CONFIG_SYS_BOOTMAPSZ
 	if ((fdt_blob + *of_size + CONFIG_SYS_FDT_PAD) >=
 			((char *)CONFIG_SYS_BOOTMAPSZ + bootmap_base))
 		relocate = 1;
+#endif
 
 	/* move flattend device tree if needed */
 	if (relocate) {
-- 
1.7.0.4

[U-Boot] [PATCH v2 6/6] ARM: enable device tree for beagle

[John Rigby]

For testing ARM device tree support

Signed-off-by: John Rigby <john.rigby@linaro.org>
---
 include/configs/omap3_beagle.h |    9 +++++++++
 1 files changed, 9 insertions(+), 0 deletions(-)

diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index 2463be4..daf84c7 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -55,6 +55,15 @@
 #undef CONFIG_USE_IRQ				/* no support for IRQs */
 #define CONFIG_MISC_INIT_R
 
+#define CONFIG_OF_LIBFDT		1
+/*
+ * The early kernel mapping on ARM currently only maps from the base of DRAM
+ * to the end of the kernel image.  The kernel is loaded at DRAM base + 0x8000.
+ * The early kernel pagetable uses DRAM base + 0x4000 to DRAM base + 0x8000,
+ * so that leaves DRAM base to DRAM base + 0x4000 available.
+ */
+#define CONFIG_SYS_BOOTMAPSZ	        0x4000
+
 #define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
 #define CONFIG_SETUP_MEMORY_TAGS	1
 #define CONFIG_INITRD_TAG		1
-- 
1.7.0.4

[U-Boot] [PATCH v2 5/6] ARM: add flat device tree support

[John Rigby]

On Wed, Sep 29, 2010 at 9:48 AM, John Rigby <john.rigby@linaro.org> wrote:
> Based on other architectures already supported.
>
> Signed-off-by: John Rigby <john.rigby@linaro.org>

[U-Boot] [PATCH v2 0/6] Add ARM flat device tree support

[John Rigby]

There have been no NACK's to this and one Tested-by, so can this
series go into 2010.12?

Thanks,
John

On Wed, Sep 29, 2010 at 9:48 AM, John Rigby <john.rigby@linaro.org> wrote:
> This is the third submission of this patch series. ?The first
> was an RFC and I received lots of comments that I addressed
> in the second for which I got no feedback.
>
> This version fixes some issues I found in testing on a hacked
> Beagle kernel with enough device tree functionality to verify
> that u-boot is able to pass a device tree.
>
> Patch summary:
> ?1-4 are fixes/clean up to existing code
> ?3 needs testing on nios and microblaze
> ?5 actually adds the ARM FDT support
> ?6 enables FDT support for omap3_beagle
>
> John Rigby (6):
> ?fdt_relocate: fix fdt size and endian bugs
> ?FDT: Add fixup support for multiple banks of memory
> ?FDT: only call boot_get_fdt from generic code
> ?boot: change some arch ifdefs to feature ifdefs
> ?ARM: add flat device tree support
> ?ARM: enable device tree for beagle
>
> ?arch/arm/include/asm/config.h ? ? | ? ?2 +
> ?arch/arm/lib/bootm.c ? ? ? ? ? ? ?| ?137 ++++++++++++++++++++++++++++++++----
> ?arch/m68k/include/asm/config.h ? ?| ? ?3 +
> ?arch/microblaze/lib/bootm.c ? ? ? | ? 12 +---
> ?arch/nios2/lib/bootm.c ? ? ? ? ? ?| ? ?8 +--
> ?arch/powerpc/include/asm/config.h | ? ?3 +
> ?arch/sparc/include/asm/config.h ? | ? ?1 +
> ?common/cmd_bootm.c ? ? ? ? ? ? ? ?| ? ?4 +-
> ?common/fdt_support.c ? ? ? ? ? ? ?| ? 86 ++++++++++++-----------
> ?common/image.c ? ? ? ? ? ? ? ? ? ?| ? 18 +++--
> ?include/configs/omap3_beagle.h ? ?| ? ?9 +++
> ?include/fdt_support.h ? ? ? ? ? ? | ? ?1 +
> ?include/image.h ? ? ? ? ? ? ? ? ? | ? ?9 ++-
> ?13 files changed, 210 insertions(+), 83 deletions(-)
>
>

[U-Boot] [PATCH v2 0/6] Add ARM flat device tree support

[John Rigby]

On Thu, Oct 7, 2010 at 10:11 AM, John Rigby <john.rigby@linaro.org> wrote:
> There have been no NACK's to this and one Tested-by, so can this
> series go into 2010.12?
>
> Thanks,
> John
>

Apologies in advance for the top post.

[U-Boot] [PATCH v2 0/6] Add ARM flat device tree support

[Wolfgang Denk]

Dear John Rigby,

In message <AANLkTi=pWR=UnByG0gGiqA4dK++5HA5XQCQo8Cfn9XUK@mail.gmail.com> you wrote:
> There have been no NACK's to this and one Tested-by, so can this
> series go into 2010.12?

Sure. Sorry, I'm late with ARM related stuff, but your patches are on
my list.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"No one talks peace unless he's ready to back it up with war."
"He talks of peace if it is the only way to live."
	-- Colonel Green and Surak of Vulcan, "The Savage Curtain",
	   stardate 5906.5.

[U-Boot] [PATCH v2 1/6] fdt_relocate: fix fdt size and endian bugs

[Wolfgang Denk]

Dear John Rigby,

In message <1285775292-15060-2-git-send-email-john.rigby@linaro.org> you wrote:
> Fix two problems in fdt_relocate.
> 
> First, for the non relocation case current code calculates
> fdt blob size by subtracting the fdt address from the end

Please consider the non relocation case obsoleted. This is nothing
that needs to or should have FDT support added.

> of bootmap.  This wrong because it assumes that the fdt_blob
> is located at the top (high) of the bootmap.  Use the current
> size plus padding instead.  For example if the blob is at
> the beginning of bootmap then the calculated size will be
> the size of the entire bootmapped area.
> 
> Second, fdt_relocate returns bad size info on little endian
> platforms because it calls be32_to_cpu on the value returned
> by fdt_totalsize.  This is wrong because the value returned
> by fdt_totalsize is already cpu endian.
> 
> Signed-off-by: John Rigby <john.rigby@linaro.org>
> ---
>  common/image.c |    6 +++---
>  1 files changed, 3 insertions(+), 3 deletions(-)

Sorry, but the commit message and the code changes don't match at all.

You say you were fixing fdt_relocate(), but you change only
common/image.c which is unrelated,

Please fix the commit message.

> diff --git a/common/image.c b/common/image.c
> index 3a2f25e..4aec9d6 100644
> --- a/common/image.c
> +++ b/common/image.c
> @@ -1252,7 +1252,7 @@ int boot_relocate_fdt (struct lmb *lmb, ulong bootmap_base,
>  		*of_size = of_len;
>  	} else {
>  		*of_flat_tree = fdt_blob;
> -		of_len = (CONFIG_SYS_BOOTMAPSZ + bootmap_base) - (ulong)fdt_blob;
> +		of_len = *of_size + (unsigned)CONFIG_SYS_FDT_PAD;

Um... what are the implications of this on other architectures?

For example, on which PowerPC systems has this been tested?

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"Science makes godlike -- it is all over with priests and  gods  when
man becomes scientific. Moral: science is the forbidden as such -- it
alone  is  forbidden. Science is the *first* sin, the *original* sin.
*This alone is  morality.*  ``Thou  shalt  not  know''  --  the  rest
follows."                                       - Friedrich Nietzsche

[U-Boot] [PATCH v2 2/6] FDT: Add fixup support for multiple banks of memory

[Wolfgang Denk]

Dear John Rigby,

In message <1285775292-15060-3-git-send-email-john.rigby@linaro.org> you wrote:
> Add fdt_fixup_memory_banks and reimplement fdt_fixup_memory
> using it.
> 
> Signed-off-by: John Rigby <john.rigby@linaro.org>

This needs to go thorugh the FDT custodian or at least needs his ACK.

You probably want to put him on Cc: so he gets aware of the patch
[done here].

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Blast medicine anyway!  We've learned to tie into every organ in the
human body but one.  The brain!  The brain is what life is all about.
	-- McCoy, "The Menagerie", stardate 3012.4

[U-Boot] [PATCH v2 3/6] FDT: only call boot_get_fdt from generic code

[Wolfgang Denk]

Dear John Rigby,

In message <1285775292-15060-4-git-send-email-john.rigby@linaro.org> you wrote:
> All arches except nios2 and microblaze call boot_get_fdt
> from bootm_start in common/cmd_bootm.c.
> 
> Having nios2 and microblaze do so as well removes code from
> their respective do_bootm_linux routines and allows removal of
> a nasty ifdef from bootm_start.
> 
> Signed-off-by: John Rigby <john.rigby@linaro.org>
> CC: Scott McNutt <smcnutt@psyent.com>
> CC: Michal Simek <monstr@monstr.eu>
> ---
>  arch/microblaze/lib/bootm.c |   12 +++---------
>  arch/nios2/lib/bootm.c      |    8 +++-----
>  common/cmd_bootm.c          |    2 --
>  3 files changed, 6 insertions(+), 16 deletions(-)
> 
> diff --git a/arch/microblaze/lib/bootm.c b/arch/microblaze/lib/bootm.c
> index 8e2c6d8..25f63d9 100644
> --- a/arch/microblaze/lib/bootm.c
> +++ b/arch/microblaze/lib/bootm.c
> @@ -46,12 +46,9 @@ int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *ima
>  
>  	char	*of_flat_tree = NULL;
>  #if defined(CONFIG_OF_LIBFDT)
> -	ulong	of_size = 0;
> -
> -	/* find flattened device tree */
> -	ret = boot_get_fdt (flag, argc, argv, images, &of_flat_tree, &of_size);
> -	if (ret)
> -		return 1;
> +	/* did generic code already find a device tree? */
> +	if (images->ft_len)
> +		of_flat_tree = images->ft_addr;
>  #endif

So what if the generic code did NOT find a device tree?

Before, there was an error return. And now?

> diff --git a/arch/nios2/lib/bootm.c b/arch/nios2/lib/bootm.c
> index 40a4d15..f32be52 100644
> --- a/arch/nios2/lib/bootm.c
> +++ b/arch/nios2/lib/bootm.c
> @@ -36,11 +36,9 @@ int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *ima
>  	ulong initrd_end = images->rd_end;
>  	char *of_flat_tree = NULL;
>  #if defined(CONFIG_OF_LIBFDT)
> -	ulong of_size = 0;
> -
> -	/* find flattened device tree */
> -	if (boot_get_fdt(flag, argc, argv, images, &of_flat_tree, &of_size))
> -		return 1;
> +	/* did generic code already find a device tree? */
> +	if (images->ft_len)
> +		of_flat_tree = images->ft_addr;

Ditto.


On which nios2 and microblaze has this been tested?

You may want to put the NIOS and MB custodians on Cc:

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"I say we take off; nuke the site from orbit. It's the only way to be
sure."                                  - Corporal Hicks, in "Aliens"

[U-Boot] [PATCH v2 4/6] boot: change some arch ifdefs to feature ifdefs

[Wolfgang Denk]

Dear John Rigby,

In message <1285775292-15060-5-git-send-email-john.rigby@linaro.org> you wrote:
> The routines boot_ramdisk_high, boot_get_cmdline and boot_get_kbd
> are currently enabled by various combinations of CONFIG_M68K,
> CONFIG_POWERPC and CONFIG_SPARC.
> 
> Use CONFIG_<FEATURE> defines instead.
> 
> CONFIG_BOOT_RAMDISK_HIGH
> CONFIG_BOOT_GET_CMDLINE
> CONFIG_BOOT_GET_KBD
> 
> Define these as appropriate in arch/include/asm/config.h files.

No. CONFIG_ means user coinfigurable options; these are not actually
configurable on a per-board base by the end user, so CONFIG_SYS_
should be used.

> Signed-off-by: John Rigby <john.rigby@linaro.org>
> ---
>  arch/m68k/include/asm/config.h    |    3 +++
>  arch/powerpc/include/asm/config.h |    3 +++
>  arch/sparc/include/asm/config.h   |    1 +
>  common/cmd_bootm.c                |    2 +-
>  common/image.c                    |   10 ++++++----
>  include/image.h                   |    9 ++++++---
>  6 files changed, 20 insertions(+), 8 deletions(-)

Also, the new variables need to be documented in the README.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
He's dead, Jim
	-- McCoy, "The Devil in the Dark", stardate 3196.1

[U-Boot] [PATCH v2 5/6] ARM: add flat device tree support

[Wolfgang Denk]

Dear John Rigby,

In message <1285775292-15060-6-git-send-email-john.rigby@linaro.org> you wrote:
> Based on other architectures already supported.
> 
> Signed-off-by: John Rigby <john.rigby@linaro.org>
> ---
>  arch/arm/include/asm/config.h |    2 +
>  arch/arm/lib/bootm.c          |  137 ++++++++++++++++++++++++++++++++++++-----
>  common/image.c                |    2 +
>  3 files changed, 125 insertions(+), 16 deletions(-)
> 
> diff --git a/arch/arm/include/asm/config.h b/arch/arm/include/asm/config.h
> index 4e8dfd7..d85a396 100644
> --- a/arch/arm/include/asm/config.h
> +++ b/arch/arm/include/asm/config.h
> @@ -25,4 +25,6 @@
>  /* Relocation to SDRAM works on all ARM boards */
>  #define CONFIG_RELOC_FIXUP_WORKS
>  #endif
> +#define CONFIG_LMB
> +#define CONFIG_BOOT_RAMDISK_HIGH
>  #endif

These should be CONFIG_SYS_ instead.


> diff --git a/common/image.c b/common/image.c
> index 0562e3b..7b181cc 100644
> --- a/common/image.c
> +++ b/common/image.c
> @@ -1214,9 +1214,11 @@ int boot_relocate_fdt (struct lmb *lmb, ulong bootmap_base,
>  	if (fdt_blob < (char *)bootmap_base)
>  		relocate = 1;
>  
> +#ifdef CONFIG_SYS_BOOTMAPSZ
>  	if ((fdt_blob + *of_size + CONFIG_SYS_FDT_PAD) >=
>  			((char *)CONFIG_SYS_BOOTMAPSZ + bootmap_base))
>  		relocate = 1;
> +#endif

What is the impact of this on other architectures?

On which systems / architectures has this been tested?

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
I wish I had a bronze torc for every user who didn't read the manual.
                             - Terry Pratchett, _The Light Fantastic_

[U-Boot] [PATCH v2 3/6] FDT: only call boot_get_fdt from generic code

[John Rigby]

On Tue, Oct 12, 2010 at 3:24 PM, Wolfgang Denk <wd@denx.de> wrote:
> Dear John Rigby,
>
> In message <1285775292-15060-4-git-send-email-john.rigby@linaro.org> you wrote:
>> All arches except nios2 and microblaze call boot_get_fdt
>> from bootm_start in common/cmd_bootm.c.
>>
....
>> - ? ? /* find flattened device tree */
>> - ? ? ret = boot_get_fdt (flag, argc, argv, images, &of_flat_tree, &of_size);
>> - ? ? if (ret)
>> - ? ? ? ? ? ? return 1;
>> + ? ? /* did generic code already find a device tree? */
>> + ? ? if (images->ft_len)
>> + ? ? ? ? ? ? of_flat_tree = images->ft_addr;
>> ?#endif
>
> So what if the generic code did NOT find a device tree?
>
> Before, there was an error return. And now?

I'll fix this.

>> - ? ? /* find flattened device tree */
>> - ? ? if (boot_get_fdt(flag, argc, argv, images, &of_flat_tree, &of_size))
>> - ? ? ? ? ? ? return 1;
>> + ? ? /* did generic code already find a device tree? */
>> + ? ? if (images->ft_len)
>> + ? ? ? ? ? ? of_flat_tree = images->ft_addr;
>
> Ditto.
And this.
>
>
> On which nios2 and microblaze has this been tested?
It hasn't that is why the custodians were CC'd.
>
> You may want to put the NIOS and MB custodians on Cc:
I just checked my original message.  They were CC'd unless I am very confused.

Thanks,
John

[U-Boot] [PATCH v2 5/6] ARM: add flat device tree support

[John Rigby]

On Tue, Oct 12, 2010 at 3:29 PM, Wolfgang Denk <wd@denx.de> wrote:
> Dear John Rigby,
>
> In message <1285775292-15060-6-git-send-email-john.rigby@linaro.org> you wrote:
>> Based on other architectures already supported.
>>
>> Signed-off-by: John Rigby <john.rigby@linaro.org>
>> ---
>> ?arch/arm/include/asm/config.h | ? ?2 +
>> ?arch/arm/lib/bootm.c ? ? ? ? ?| ?137 ++++++++++++++++++++++++++++++++++++-----
>> ?common/image.c ? ? ? ? ? ? ? ?| ? ?2 +
>> ?3 files changed, 125 insertions(+), 16 deletions(-)
>>
>> diff --git a/arch/arm/include/asm/config.h b/arch/arm/include/asm/config.h
>> index 4e8dfd7..d85a396 100644
>> --- a/arch/arm/include/asm/config.h
>> +++ b/arch/arm/include/asm/config.h
>> @@ -25,4 +25,6 @@
>> ?/* Relocation to SDRAM works on all ARM boards */
>> ?#define CONFIG_RELOC_FIXUP_WORKS
>> ?#endif
>> +#define CONFIG_LMB
>> +#define CONFIG_BOOT_RAMDISK_HIGH
>> ?#endif
>
> These should be CONFIG_SYS_ instead.
These are not new.  Do you want me to submit a patch changing all
existing instances to CONFIG_SYS_*?
>
>
>> diff --git a/common/image.c b/common/image.c
>> index 0562e3b..7b181cc 100644
>> --- a/common/image.c
>> +++ b/common/image.c
>> @@ -1214,9 +1214,11 @@ int boot_relocate_fdt (struct lmb *lmb, ulong bootmap_base,
>> ? ? ? if (fdt_blob < (char *)bootmap_base)
>> ? ? ? ? ? ? ? relocate = 1;
>>
>> +#ifdef CONFIG_SYS_BOOTMAPSZ
>> ? ? ? if ((fdt_blob + *of_size + CONFIG_SYS_FDT_PAD) >=
>> ? ? ? ? ? ? ? ? ? ? ? ((char *)CONFIG_SYS_BOOTMAPSZ + bootmap_base))
>> ? ? ? ? ? ? ? relocate = 1;
>> +#endif
>
> What is the impact of this on other architectures?
This ifdef is not needed I will remove it.  It is an artifact of trying
to make the code work without CONFIG_SYS_BOOTMAPSZ which I subsequently
abandoned.
>
> On which systems / architectures has this been tested?
>
> Best regards,
>
> Wolfgang Denk
>
> --
> DENX Software Engineering GmbH, ? ? MD: Wolfgang Denk & Detlev Zundel
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
> I wish I had a bronze torc for every user who didn't read the manual.
> ? ? ? ? ? ? ? ? ? ? ? ? ? ? - Terry Pratchett, _The Light Fantastic_
>

[U-Boot] [PATCH v2 3/6] FDT: only call boot_get_fdt from generic code

[Wolfgang Denk]

Dear John Rigby,

In message <AANLkTi=Qzxn91cp3XwN=OaDNK0VRV0yLnRAeh5W9J2G+@mail.gmail.com> you wrote:
>
> > You may want to put the NIOS and MB custodians on Cc:
> I just checked my original message.  They were CC'd unless I am very confused.

We really have to find out when and why the list server is playing
such tricks on us :-(

Sorry for the noise, then.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Here is an Appalachian version of management's answer  to  those  who
are  concerned  with  the fate of the project: "Don't worry about the
mule. Just load the wagon."         - Mike Dennison's hillbilly uncle

[U-Boot] [PATCH v2 4/6] boot: change some arch ifdefs to feature ifdefs

[John Rigby]

On Tue, Oct 12, 2010 at 3:27 PM, Wolfgang Denk <wd@denx.de> wrote:
> Dear John Rigby,
>
> In message <1285775292-15060-5-git-send-email-john.rigby@linaro.org> you wrote:
>> The routines boot_ramdisk_high, boot_get_cmdline and boot_get_kbd
>> are currently enabled by various combinations of CONFIG_M68K,
>> CONFIG_POWERPC and CONFIG_SPARC.
>>
>> Use CONFIG_<FEATURE> defines instead.
>>
>> CONFIG_BOOT_RAMDISK_HIGH
>> CONFIG_BOOT_GET_CMDLINE
>> CONFIG_BOOT_GET_KBD
>>
>> Define these as appropriate in arch/include/asm/config.h files.
>
> No. CONFIG_ means user coinfigurable options; these are not actually
> configurable on a per-board base by the end user, so CONFIG_SYS_
> should be used.
I will change these to CONFIG_SYS_ and document them in README.

[U-Boot] [PATCH v2 1/6] fdt_relocate: fix fdt size and endian bugs

[John Rigby]

On Tue, Oct 12, 2010 at 3:20 PM, Wolfgang Denk <wd@denx.de> wrote:
> Dear John Rigby,
>
> In message <1285775292-15060-2-git-send-email-john.rigby@linaro.org> you wrote:
>> Fix two problems in fdt_relocate.
Sorry this should be boot_relocate_fdt
>>
>> First, for the non relocation case current code calculates
>> fdt blob size by subtracting the fdt address from the end
>
> Please consider the non relocation case obsoleted. This is nothing
> that needs to or should have FDT support added.
>
>> of bootmap. ?This wrong because it assumes that the fdt_blob
>> is located at the top (high) of the bootmap. ?Use the current
>> size plus padding instead. ?For example if the blob is at
>> the beginning of bootmap then the calculated size will be
>> the size of the entire bootmapped area.
>>
>> Second, fdt_relocate returns bad size info on little endian
>> platforms because it calls be32_to_cpu on the value returned
>> by fdt_totalsize. ?This is wrong because the value returned
>> by fdt_totalsize is already cpu endian.

After changing fdt_relocate to boot_relocate_fdt the commit
message is correct.

>> index 3a2f25e..4aec9d6 100644
>> --- a/common/image.c
>> +++ b/common/image.c
>> @@ -1252,7 +1252,7 @@ int boot_relocate_fdt (struct lmb *lmb, ulong bootmap_base,
>> ? ? ? ? ? ? ? *of_size = of_len;
>> ? ? ? } else {
>> ? ? ? ? ? ? ? *of_flat_tree = fdt_blob;
>> - ? ? ? ? ? ? of_len = (CONFIG_SYS_BOOTMAPSZ + bootmap_base) - (ulong)fdt_blob;
>> + ? ? ? ? ? ? of_len = *of_size + (unsigned)CONFIG_SYS_FDT_PAD;
>
> Um... what are the implications of this on other architectures?

I believe this bug has never caused anyone problems because
the else has never been reached.

[U-Boot] [PATCH v2 5/6] ARM: add flat device tree support

[Wolfgang Denk]

Dear John Rigby,

In message <AANLkTikYU9LtSCHLUP-6-=vd5WPWpnyVkHkZnW23zqc5@mail.gmail.com> you wrote:
>
> >> index 4e8dfd7..d85a396 100644
> >> --- a/arch/arm/include/asm/config.h
> >> +++ b/arch/arm/include/asm/config.h
> >> @@ -25,4 +25,6 @@
> >>  /* Relocation to SDRAM works on all ARM boards */
> >>  #define CONFIG_RELOC_FIXUP_WORKS
> >>  #endif
> >> +#define CONFIG_LMB
> >> +#define CONFIG_BOOT_RAMDISK_HIGH
> >>  #endif
> >
> > These should be CONFIG_SYS_ instead.
> These are not new.  Do you want me to submit a patch changing all
> existing instances to CONFIG_SYS_*?

Not new? I must be missing something then. I cannot find any reference
to CONFIG_BOOT_RAMDISK_HIGH anywhere in the current code.

CONFIG_LMB is indeed not new, but a misnomer that should by fixed.
Also, an explanation should be added to the README. [I am aware that
this is not a fault of your patch.]

CONFIG_RELOC_FIXUP_WORKS is also a misnomer now, and undocumented :-(

> > On which systems / architectures has this been tested?


Please make sure to proovide such information, it _is_ important.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Celestial navigation is based on the premise that the  Earth  is  the
center  of  the  universe.  The  premise is wrong, but the navigation
works. An incorrect model can be a useful tool.   - Kelvin Throop III

[U-Boot] [PATCH v2 1/6] fdt_relocate: fix fdt size and endian bugs

[Wolfgang Denk]

Dear John Rigby,

In message <AANLkTimuGeO9wq8FWDmwcyo2Rrfe1h9fyy05TYzJ4LRR@mail.gmail.com> you wrote:
> On Tue, Oct 12, 2010 at 3:20 PM, Wolfgang Denk <wd@denx.de> wrote:
> > Dear John Rigby,
> >
> > In message <1285775292-15060-2-git-send-email-john.rigby@linaro.org> you wrote:
> >> Fix two problems in fdt_relocate.
> Sorry this should be boot_relocate_fdt

In the Subject: it's more helpful to refer to the component / file
name, i. e. here: "common/image.c: ..."

> >> Second, fdt_relocate returns bad size info on little endian
> >> platforms because it calls be32_to_cpu on the value returned
> >> by fdt_totalsize. ?This is wrong because the value returned
> >> by fdt_totalsize is already cpu endian.
>
> After changing fdt_relocate to boot_relocate_fdt the commit
> message is correct.

I disagree. My understanding is that fdt_relocate() does not return a
bad size, the additional use of be32_to_cpu() in image.c corrupts the
correct value.  Otherwise the fix would need to be done in
fdt_relocate().

> > Um... what are the implications of this on other architectures?
>
> I believe this bug has never caused anyone problems because
> the else has never been reached.

So what are the implications, and how has it been tested?

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Making files is easy under  the  UNIX  operating  system.  Therefore,
users  tend  to  create  numerous  files  using large amounts of file
space. It has been said that the only standard thing about  all  UNIX
systems  is  the  message-of-the-day  telling users to clean up their
files.                            -- System V.2 administrator's guide

[U-Boot] [PATCH v3 0/7] Add ARM flat device tree support

[John Rigby]

This new v3 series attempts to address all feedback received
regarding v2.

Patch 1/7 and 2/7 (old 1/6) split in two with better
commit message to explain what exactly the fixes do.
Patch 3/7 (old 2/6) added CC to libfdt maintainer.
Patch 4/7 (old 3/6) fixed patch and better commit message and
added another CC.
Patch 5/7 (old 4/6) changed the new CONFIG_*'s to CONFIG_SYS_*'s
and documented them in README.
Patch 6/7 (old 5/6) Removed redundant ifdef, better commit message.
Patch 7/7 (old 6/6) Unchanged.

John Rigby (7):
  common/image.c fix length calculation in boot_relocate_fdt
  common/image.c remove extra calls to be32_to_cpu in boot_get_fdt
  FDT: Add fixup support for multiple banks of memory
  FDT: only call boot_get_fdt from generic code
  boot: change some arch ifdefs to feature ifdefs
  ARM: add flat device tree support
  ARM: enable device tree for beagle

 README                            |   13 ++++
 arch/arm/include/asm/config.h     |    2 +
 arch/arm/lib/bootm.c              |  137 ++++++++++++++++++++++++++++++++----
 arch/m68k/include/asm/config.h    |    3 +
 arch/microblaze/lib/bootm.c       |   14 ++---
 arch/nios2/lib/bootm.c            |    8 +--
 arch/powerpc/include/asm/config.h |    3 +
 arch/sparc/include/asm/config.h   |    1 +
 common/cmd_bootm.c                |    6 +-
 common/fdt_support.c              |   86 ++++++++++++-----------
 common/image.c                    |   16 +++--
 include/configs/omap3_beagle.h    |    9 +++
 include/fdt_support.h             |    1 +
 include/image.h                   |    9 ++-
 14 files changed, 224 insertions(+), 84 deletions(-)

[U-Boot] [PATCH v3 1/7] common/image.c fix length calculation in boot_relocate_fdt

[John Rigby]

boot_relocate_fdt is called on platforms with CONFIG_SYS_BOOTMAPSZ
defined to relocate the device tree blob to be inside the
boot map area between bootmap_base and bootmap_base+CONFIG_SYS_BOOTMAPSZ.

For the case where the blob needs to be relocated, space is
allocated inside the bootmap by calling lmb_alloc_base with
size passed in plus some padding:

    of_len = *of_size + CONFIG_SYS_FDT_PAD;

For the case where the blob is already inside the bounds of the boot map
area, lmb_reserve is called to reserve the the space where the blob is
already residing.  The calculation for this case is currently:

    of_len = (CONFIG_SYS_BOOTMAPSZ + bootmap_base) - (ulong)fdt_blob;

This is wrong because it reserves all the space in the boot map area
from the blob to the end ignoring completely the actual size. The
worst case is where the blob is at the beginning and the entire boot map
area get reserved. Fix this by changing the length calculation to this:

    of_len = *of_size + CONFIG_SYS_FDT_PAD;

This bug has likely never manifested itself because bootm has never
been called with the fdt blob already in the bootmap area.  In my
testing on an OMAP3 beagle board I initially worked around the bug
by simply moving the initial location of the fdt blob.  I have tested
with the new calculation with the fdt blob both inside and outside
the boot map area.

Signed-off-by: John Rigby <john.rigby@linaro.org>
---
 common/image.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/common/image.c b/common/image.c
index 3a2f25e..f59904d 100644
--- a/common/image.c
+++ b/common/image.c
@@ -1252,7 +1252,7 @@ int boot_relocate_fdt (struct lmb *lmb, ulong bootmap_base,
 		*of_size = of_len;
 	} else {
 		*of_flat_tree = fdt_blob;
-		of_len = (CONFIG_SYS_BOOTMAPSZ + bootmap_base) - (ulong)fdt_blob;
+		of_len = *of_size + CONFIG_SYS_FDT_PAD;
 		lmb_reserve(lmb, (ulong)fdt_blob, of_len);
 		fdt_set_totalsize(*of_flat_tree, of_len);
 
-- 
1.7.1

[U-Boot] [PATCH v3 2/7] common/image.c remove extra calls to be32_to_cpu in boot_get_fdt

[John Rigby]

fdt_totalsize returns size in cpu endian so don't call be32_to_cpu
on the result.  This was harmless on big endian platforms but not
on little endian ARMs.

Signed-off-by: John Rigby <john.rigby@linaro.org>
---
 common/image.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/common/image.c b/common/image.c
index f59904d..dda3025 100644
--- a/common/image.c
+++ b/common/image.c
@@ -1561,7 +1561,7 @@ int boot_get_fdt (int flag, int argc, char * const argv[], bootm_headers_t *imag
 				goto error;
 			}
 
-			if (be32_to_cpu (fdt_totalsize (fdt_blob)) != fdt_len) {
+			if (fdt_totalsize(fdt_blob) != fdt_len) {
 				fdt_error ("fdt size != image size");
 				goto error;
 			}
@@ -1575,7 +1575,7 @@ int boot_get_fdt (int flag, int argc, char * const argv[], bootm_headers_t *imag
 	}
 
 	*of_flat_tree = fdt_blob;
-	*of_size = be32_to_cpu (fdt_totalsize (fdt_blob));
+	*of_size = fdt_totalsize(fdt_blob);
 	debug ("   of_flat_tree at 0x%08lx size 0x%08lx\n",
 			(ulong)*of_flat_tree, *of_size);
 
-- 
1.7.1

[U-Boot] [PATCH v3 3/7] FDT: Add fixup support for multiple banks of memory

[John Rigby]

Add fdt_fixup_memory_banks and reimplement fdt_fixup_memory
using it.  Tested on OMAP3 beagle board with two banks of
memory.

Signed-off-by: John Rigby <john.rigby@linaro.org>
CC: Jerry Van Baren <vanbaren@cideas.com>
---
 common/fdt_support.c  |   86 ++++++++++++++++++++++++++-----------------------
 include/fdt_support.h |    1 +
 2 files changed, 47 insertions(+), 40 deletions(-)

diff --git a/common/fdt_support.c b/common/fdt_support.c
index 9b65a8a..fe53779 100644
--- a/common/fdt_support.c
+++ b/common/fdt_support.c
@@ -362,10 +362,40 @@ void do_fixup_by_compat_u32(void *fdt, const char *compat,
 	do_fixup_by_compat(fdt, compat, prop, &val, 4, create);
 }
 
-int fdt_fixup_memory(void *blob, u64 start, u64 size)
+/*
+ * Get cells len in bytes
+ *     if #NNNN-cells property is 2 then len is 8
+ *     otherwise len is 4
+ */
+static int get_cells_len(void *blob, char *nr_cells_name)
+{
+	const u32 *cell;
+
+	cell = fdt_getprop(blob, 0, nr_cells_name, NULL);
+	if (cell && *cell == 2)
+		return 8;
+
+	return 4;
+}
+
+/*
+ * Write a 4 or 8 byte big endian cell
+ */
+static void write_cell(u8 *addr, u64 val, int size)
 {
-	int err, nodeoffset, len = 0;
-	u8 tmp[16];
+	int shift = (size - 1) * 8;
+	while (size-- > 0) {
+		*addr++ = (val >> shift) & 0xff;
+		shift -= 8;
+	}
+}
+
+int fdt_fixup_memory_banks(void *blob, u64 start[], u64 size[], int banks)
+{
+	int err, nodeoffset;
+	int addr_cell_len, size_cell_len, len;
+	u8 tmp[banks * 8];
+	int bank;
 	const u32 *addrcell, *sizecell;
 
 	err = fdt_check_header(blob);
@@ -391,44 +421,15 @@ int fdt_fixup_memory(void *blob, u64 start, u64 size)
 		return err;
 	}
 
-	addrcell = fdt_getprop(blob, 0, "#address-cells", NULL);
-	/* use shifts and mask to ensure endianness */
-	if ((addrcell) && (*addrcell == 2)) {
-		tmp[0] = (start >> 56) & 0xff;
-		tmp[1] = (start >> 48) & 0xff;
-		tmp[2] = (start >> 40) & 0xff;
-		tmp[3] = (start >> 32) & 0xff;
-		tmp[4] = (start >> 24) & 0xff;
-		tmp[5] = (start >> 16) & 0xff;
-		tmp[6] = (start >>  8) & 0xff;
-		tmp[7] = (start      ) & 0xff;
-		len = 8;
-	} else {
-		tmp[0] = (start >> 24) & 0xff;
-		tmp[1] = (start >> 16) & 0xff;
-		tmp[2] = (start >>  8) & 0xff;
-		tmp[3] = (start      ) & 0xff;
-		len = 4;
-	}
+	addr_cell_len = get_cells_len(blob, "#address-cells");
+	size_cell_len = get_cells_len(blob, "#size-cells");
 
-	sizecell = fdt_getprop(blob, 0, "#size-cells", NULL);
-	/* use shifts and mask to ensure endianness */
-	if ((sizecell) && (*sizecell == 2)) {
-		tmp[0+len] = (size >> 56) & 0xff;
-		tmp[1+len] = (size >> 48) & 0xff;
-		tmp[2+len] = (size >> 40) & 0xff;
-		tmp[3+len] = (size >> 32) & 0xff;
-		tmp[4+len] = (size >> 24) & 0xff;
-		tmp[5+len] = (size >> 16) & 0xff;
-		tmp[6+len] = (size >>  8) & 0xff;
-		tmp[7+len] = (size      ) & 0xff;
-		len += 8;
-	} else {
-		tmp[0+len] = (size >> 24) & 0xff;
-		tmp[1+len] = (size >> 16) & 0xff;
-		tmp[2+len] = (size >>  8) & 0xff;
-		tmp[3+len] = (size      ) & 0xff;
-		len += 4;
+	for (bank = 0, len = 0; bank < banks; bank++) {
+		write_cell(tmp + len, start[bank], addr_cell_len);
+		len += addr_cell_len;
+
+		write_cell(tmp + len, size[bank], size_cell_len);
+		len += size_cell_len;
 	}
 
 	err = fdt_setprop(blob, nodeoffset, "reg", tmp, len);
@@ -440,6 +441,11 @@ int fdt_fixup_memory(void *blob, u64 start, u64 size)
 	return 0;
 }
 
+int fdt_fixup_memory(void *blob, u64 start, u64 size)
+{
+	return fdt_fixup_memory_banks(blob, &start, &size, 1);
+}
+
 void fdt_fixup_ethernet(void *fdt)
 {
 	int node, i, j;
diff --git a/include/fdt_support.h b/include/fdt_support.h
index deb5dda..ce6817b 100644
--- a/include/fdt_support.h
+++ b/include/fdt_support.h
@@ -48,6 +48,7 @@ void do_fixup_by_compat(void *fdt, const char *compat,
 void do_fixup_by_compat_u32(void *fdt, const char *compat,
 			    const char *prop, u32 val, int create);
 int fdt_fixup_memory(void *blob, u64 start, u64 size);
+int fdt_fixup_memory_banks(void *blob, u64 start[], u64 size[], int banks);
 void fdt_fixup_ethernet(void *fdt);
 int fdt_find_and_setprop(void *fdt, const char *node, const char *prop,
 			 const void *val, int len, int create);
-- 
1.7.1

[U-Boot] [PATCH v3 4/7] FDT: only call boot_get_fdt from generic code

[John Rigby]

All arches except nios2 and microblaze call boot_get_fdt
from bootm_start in common/cmd_bootm.c.

Having nios2 and microblaze do so as well removes code from
their respective do_bootm_linux routines and allows removal of
a nasty ifdef from bootm_start.

In the case where boot_get_fdt returns an error bootm_start
returns and the platform specific do_bootm_linux routines
will never get called.

Also only check argv[3] for an fdt addr if argc > 3 first.
This is already the case for nios2.

Signed-off-by: John Rigby <john.rigby@linaro.org>
CC: Scott McNutt <smcnutt@psyent.com>
CC: Michal Simek <monstr@monstr.eu>
CC: Thomas Chou <thomas@wytron.com.tw>
---
 arch/microblaze/lib/bootm.c |   14 +++++---------
 arch/nios2/lib/bootm.c      |    8 +++-----
 common/cmd_bootm.c          |    2 --
 3 files changed, 8 insertions(+), 16 deletions(-)

diff --git a/arch/microblaze/lib/bootm.c b/arch/microblaze/lib/bootm.c
index 8e2c6d8..9f6d6d6 100644
--- a/arch/microblaze/lib/bootm.c
+++ b/arch/microblaze/lib/bootm.c
@@ -46,12 +46,9 @@ int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *ima
 
 	char	*of_flat_tree = NULL;
 #if defined(CONFIG_OF_LIBFDT)
-	ulong	of_size = 0;
-
-	/* find flattened device tree */
-	ret = boot_get_fdt (flag, argc, argv, images, &of_flat_tree, &of_size);
-	if (ret)
-		return 1;
+	/* did generic code already find a device tree? */
+	if (images->ft_len)
+		of_flat_tree = images->ft_addr;
 #endif
 
 	theKernel = (void (*)(char *, ulong, ulong))images->ep;
@@ -64,9 +61,8 @@ int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *ima
 
 	show_boot_progress (15);
 
-	if (!(ulong) of_flat_tree)
-		of_flat_tree = (char *)simple_strtoul (argv[3], NULL, 16);
-
+	if (!of_flat_tree && argc > 3)
+		of_flat_tree = (char *)simple_strtoul(argv[3], NULL, 16);
 #ifdef DEBUG
 	printf ("## Transferring control to Linux (at address 0x%08lx) " \
 				"ramdisk 0x%08lx, FDT 0x%08lx...\n",
diff --git a/arch/nios2/lib/bootm.c b/arch/nios2/lib/bootm.c
index 40a4d15..f32be52 100644
--- a/arch/nios2/lib/bootm.c
+++ b/arch/nios2/lib/bootm.c
@@ -36,11 +36,9 @@ int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *ima
 	ulong initrd_end = images->rd_end;
 	char *of_flat_tree = NULL;
 #if defined(CONFIG_OF_LIBFDT)
-	ulong of_size = 0;
-
-	/* find flattened device tree */
-	if (boot_get_fdt(flag, argc, argv, images, &of_flat_tree, &of_size))
-		return 1;
+	/* did generic code already find a device tree? */
+	if (images->ft_len)
+		of_flat_tree = images->ft_addr;
 #endif
 	if (!of_flat_tree && argc > 3)
 		of_flat_tree = (char *)simple_strtoul(argv[3], NULL, 16);
diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c
index db59e6f..25bc39c 100644
--- a/common/cmd_bootm.c
+++ b/common/cmd_bootm.c
@@ -308,7 +308,6 @@ static int bootm_start(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]
 		}
 
 #if defined(CONFIG_OF_LIBFDT)
-#if defined(CONFIG_PPC) || defined(CONFIG_M68K) || defined(CONFIG_SPARC)
 		/* find flattened device tree */
 		ret = boot_get_fdt (flag, argc, argv, &images,
 				    &images.ft_addr, &images.ft_len);
@@ -319,7 +318,6 @@ static int bootm_start(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]
 
 		set_working_fdt_addr(images.ft_addr);
 #endif
-#endif
 	}
 
 	images.os.start = (ulong)os_hdr;
-- 
1.7.1

[U-Boot] [PATCH v3 5/7] boot: change some arch ifdefs to feature ifdefs

[John Rigby]

The routines boot_ramdisk_high, boot_get_cmdline and boot_get_kbd
are currently enabled by various combinations of CONFIG_M68K,
CONFIG_POWERPC and CONFIG_SPARC.

Use CONFIG_SYS_BOOT_<FEATURE> defines instead.

CONFIG_SYS_BOOT_RAMDISK_HIGH
CONFIG_SYS_BOOT_GET_CMDLINE
CONFIG_SYS_BOOT_GET_KBD

Define these as appropriate in arch/include/asm/config.h files.

Signed-off-by: John Rigby <john.rigby@linaro.org>
---
 README                            |   13 +++++++++++++
 arch/m68k/include/asm/config.h    |    3 +++
 arch/powerpc/include/asm/config.h |    3 +++
 arch/sparc/include/asm/config.h   |    1 +
 common/cmd_bootm.c                |    4 ++--
 common/image.c                    |   10 ++++++----
 include/image.h                   |    9 ++++++---
 7 files changed, 34 insertions(+), 9 deletions(-)

diff --git a/README b/README
index 197804e..686c6b7 100644
--- a/README
+++ b/README
@@ -2275,6 +2275,19 @@ Configuration Settings:
 		all data for the Linux kernel must be between "bootm_low"
 		and "bootm_low" + CONFIG_SYS_BOOTMAPSZ.
 
+- CONFIG_SYS_BOOT_RAMDISK_HIGH:
+		Enable initrd_high functionality.  If defined then the
+		initrd_high feature is enabled and the bootm ramdisk subcommand
+		is enabled.
+
+- CONFIG_SYS_BOOT_GET_CMDLINE:
+		Enables allocating and saving kernel cmdline in space between
+		"bootm_low" and "bootm_low" + BOOTMAPSZ.
+
+- CONFIG_SYS_BOOT_GET_KBD:
+		Enables allocating and saving a kernel copy of the bd_info in
+		space between "bootm_low" and "bootm_low" + BOOTMAPSZ.
+
 - CONFIG_SYS_MAX_FLASH_BANKS:
 		Max number of Flash memory banks
 
diff --git a/arch/m68k/include/asm/config.h b/arch/m68k/include/asm/config.h
index 36438be..ec2cc16 100644
--- a/arch/m68k/include/asm/config.h
+++ b/arch/m68k/include/asm/config.h
@@ -22,5 +22,8 @@
 #define _ASM_CONFIG_H_
 
 #define CONFIG_LMB
+#define CONFIG_SYS_BOOT_RAMDISK_HIGH
+#define CONFIG_SYS_BOOT_GET_CMDLINE
+#define CONFIG_SYS_BOOT_GET_KBD
 
 #endif
diff --git a/arch/powerpc/include/asm/config.h b/arch/powerpc/include/asm/config.h
index d098657..a1942ca 100644
--- a/arch/powerpc/include/asm/config.h
+++ b/arch/powerpc/include/asm/config.h
@@ -22,6 +22,9 @@
 #define _ASM_CONFIG_H_
 
 #define CONFIG_LMB
+#define CONFIG_SYS_BOOT_RAMDISK_HIGH
+#define CONFIG_SYS_BOOT_GET_CMDLINE
+#define CONFIG_SYS_BOOT_GET_KBD
 
 #ifndef CONFIG_MAX_MEM_MAPPED
 #if defined(CONFIG_4xx) || defined(CONFIG_E500) || defined(CONFIG_MPC86xx)
diff --git a/arch/sparc/include/asm/config.h b/arch/sparc/include/asm/config.h
index 36438be..6ddc349 100644
--- a/arch/sparc/include/asm/config.h
+++ b/arch/sparc/include/asm/config.h
@@ -22,5 +22,6 @@
 #define _ASM_CONFIG_H_
 
 #define CONFIG_LMB
+#define CONFIG_SYS_BOOT_RAMDISK_HIGH
 
 #endif
diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c
index 25bc39c..ce3c77c 100644
--- a/common/cmd_bootm.c
+++ b/common/cmd_bootm.c
@@ -472,7 +472,7 @@ static int bootm_start_standalone(ulong iflag, int argc, char * const argv[])
 static cmd_tbl_t cmd_bootm_sub[] = {
 	U_BOOT_CMD_MKENT(start, 0, 1, (void *)BOOTM_STATE_START, "", ""),
 	U_BOOT_CMD_MKENT(loados, 0, 1, (void *)BOOTM_STATE_LOADOS, "", ""),
-#if defined(CONFIG_PPC) || defined(CONFIG_M68K) || defined(CONFIG_SPARC)
+#ifdef CONFIG_SYS_BOOT_RAMDISK_HIGH
 	U_BOOT_CMD_MKENT(ramdisk, 0, 1, (void *)BOOTM_STATE_RAMDISK, "", ""),
 #endif
 #ifdef CONFIG_OF_LIBFDT
@@ -528,7 +528,7 @@ int do_bootm_subcommand (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv
 			lmb_reserve(&images.lmb, images.os.load,
 					(load_end - images.os.load));
 			break;
-#if defined(CONFIG_PPC) || defined(CONFIG_M68K) || defined(CONFIG_SPARC)
+#ifdef CONFIG_SYS_BOOT_RAMDISK_HIGH
 		case BOOTM_STATE_RAMDISK:
 		{
 			ulong rd_len = images.rd_end - images.rd_start;
diff --git a/common/image.c b/common/image.c
index dda3025..385464d 100644
--- a/common/image.c
+++ b/common/image.c
@@ -992,7 +992,7 @@ int boot_get_ramdisk (int argc, char * const argv[], bootm_headers_t *images,
 	return 0;
 }
 
-#if defined(CONFIG_PPC) || defined(CONFIG_M68K) || defined(CONFIG_SPARC)
+#ifdef CONFIG_SYS_BOOT_RAMDISK_HIGH
 /**
  * boot_ramdisk_high - relocate init ramdisk
  * @lmb: pointer to lmb handle, will be used for memory mgmt
@@ -1081,7 +1081,7 @@ int boot_ramdisk_high (struct lmb *lmb, ulong rd_data, ulong rd_len,
 error:
 	return -1;
 }
-#endif /* defined(CONFIG_PPC) || defined(CONFIG_M68K) || defined(CONFIG_SPARC) */
+#endif /* CONFIG_SYS_BOOT_RAMDISK_HIGH */
 
 #ifdef CONFIG_OF_LIBFDT
 static void fdt_error (const char *msg)
@@ -1588,7 +1588,7 @@ error:
 }
 #endif /* CONFIG_OF_LIBFDT */
 
-#if defined(CONFIG_PPC) || defined(CONFIG_M68K)
+#ifdef CONFIG_SYS_BOOT_GET_CMDLINE
 /**
  * boot_get_cmdline - allocate and initialize kernel cmdline
  * @lmb: pointer to lmb handle, will be used for memory mgmt
@@ -1630,7 +1630,9 @@ int boot_get_cmdline (struct lmb *lmb, ulong *cmd_start, ulong *cmd_end,
 
 	return 0;
 }
+#endif /* CONFIG_SYS_BOOT_GET_CMDLINE */
 
+#ifdef CONFIG_SYS_BOOT_GET_KBD
 /**
  * boot_get_kbd - allocate and initialize kernel copy of board info
  * @lmb: pointer to lmb handle, will be used for memory mgmt
@@ -1663,7 +1665,7 @@ int boot_get_kbd (struct lmb *lmb, bd_t **kbd, ulong bootmap_base)
 
 	return 0;
 }
-#endif /* CONFIG_PPC || CONFIG_M68K */
+#endif /* CONFIG_SYS_BOOT_GET_KBD */
 #endif /* !USE_HOSTCC */
 
 #if defined(CONFIG_FIT)
diff --git a/include/image.h b/include/image.h
index 18a9f0e..49d6280 100644
--- a/include/image.h
+++ b/include/image.h
@@ -340,14 +340,17 @@ int boot_relocate_fdt (struct lmb *lmb, ulong bootmap_base,
 		char **of_flat_tree, ulong *of_size);
 #endif
 
-#if defined(CONFIG_PPC) || defined(CONFIG_M68K)
+#ifdef CONFIG_SYS_BOOT_RAMDISK_HIGH
 int boot_ramdisk_high (struct lmb *lmb, ulong rd_data, ulong rd_len,
 		  ulong *initrd_start, ulong *initrd_end);
-
+#endif /* CONFIG_SYS_BOOT_RAMDISK_HIGH */
+#ifdef CONFIG_SYS_BOOT_GET_CMDLINE
 int boot_get_cmdline (struct lmb *lmb, ulong *cmd_start, ulong *cmd_end,
 			ulong bootmap_base);
+#endif /* CONFIG_SYS_BOOT_GET_CMDLINE */
+#ifdef CONFIG_SYS_BOOT_GET_KBD
 int boot_get_kbd (struct lmb *lmb, bd_t **kbd, ulong bootmap_base);
-#endif /* CONFIG_PPC || CONFIG_M68K */
+#endif /* CONFIG_SYS_BOOT_GET_KBD */
 #endif /* !USE_HOSTCC */
 
 /*******************************************************************/
-- 
1.7.1

[U-Boot] [PATCH v3 6/7] ARM: add flat device tree support

[John Rigby]

Based on other architectures already supported.
Tested on OMAP3 Beagle board and another unnamed ARM platform.

Signed-off-by: John Rigby <john.rigby@linaro.org>
Tested-by: Rob Herring <rob.herring@smooth-stone.com>
---
 arch/arm/include/asm/config.h |    2 +
 arch/arm/lib/bootm.c          |  137 ++++++++++++++++++++++++++++++++++++-----
 2 files changed, 123 insertions(+), 16 deletions(-)

diff --git a/arch/arm/include/asm/config.h b/arch/arm/include/asm/config.h
index 4e8dfd7..d8e33fc 100644
--- a/arch/arm/include/asm/config.h
+++ b/arch/arm/include/asm/config.h
@@ -25,4 +25,6 @@
 /* Relocation to SDRAM works on all ARM boards */
 #define CONFIG_RELOC_FIXUP_WORKS
 #endif
+#define CONFIG_LMB
+#define CONFIG_SYS_BOOT_RAMDISK_HIGH
 #endif
diff --git a/arch/arm/lib/bootm.c b/arch/arm/lib/bootm.c
index 3101321..2e7b2e1 100644
--- a/arch/arm/lib/bootm.c
+++ b/arch/arm/lib/bootm.c
@@ -26,6 +26,9 @@
 #include <image.h>
 #include <u-boot/zlib.h>
 #include <asm/byteorder.h>
+#include <fdt.h>
+#include <libfdt.h>
+#include <fdt_support.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -50,12 +53,52 @@ static void setup_end_tag (bd_t *bd);
 static struct tag *params;
 #endif /* CONFIG_SETUP_MEMORY_TAGS || CONFIG_CMDLINE_TAG || CONFIG_INITRD_TAG */
 
-int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *images)
+static ulong get_sp(void);
+#if defined(CONFIG_OF_LIBFDT)
+static int bootm_linux_fdt(int machid, bootm_headers_t *images);
+#endif
+
+void arch_lmb_reserve(struct lmb *lmb)
+{
+	ulong sp;
+
+	/*
+	 * Booting a (Linux) kernel image
+	 *
+	 * Allocate space for command line and board info - the
+	 * address should be as high as possible within the reach of
+	 * the kernel (see CONFIG_SYS_BOOTMAPSZ settings), but in unused
+	 * memory, which means far enough below the current stack
+	 * pointer.
+	 */
+	sp = get_sp();
+	debug("## Current stack ends at 0x%08lx ", sp);
+
+	/* adjust sp by 1K to be safe */
+	sp -= 1024;
+	lmb_reserve(lmb, sp,
+		    gd->bd->bi_dram[0].start + gd->bd->bi_dram[0].size - sp);
+}
+
+static void announce_and_cleanup(void)
+{
+	printf("\nStarting kernel ...\n\n");
+
+#ifdef CONFIG_USB_DEVICE
+	{
+		extern void udc_disconnect(void);
+		udc_disconnect();
+	}
+#endif
+	cleanup_before_linux();
+}
+
+int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
 {
 	bd_t	*bd = gd->bd;
 	char	*s;
 	int	machid = bd->bi_arch_number;
-	void	(*theKernel)(int zero, int arch, uint params);
+	void	(*kernel_entry)(int zero, int arch, uint params);
 
 #ifdef CONFIG_CMDLINE_TAG
 	char *commandline = getenv ("bootargs");
@@ -64,8 +107,6 @@ int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *ima
 	if ((flag != 0) && (flag != BOOTM_STATE_OS_GO))
 		return 1;
 
-	theKernel = (void (*)(int, int, uint))images->ep;
-
 	s = getenv ("machid");
 	if (s) {
 		machid = simple_strtoul (s, NULL, 16);
@@ -74,8 +115,15 @@ int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *ima
 
 	show_boot_progress (15);
 
+#ifdef CONFIG_OF_LIBFDT
+	if (images->ft_len)
+		return bootm_linux_fdt(machid, images);
+#endif
+
+	kernel_entry = (void (*)(int, int, uint))images->ep;
+
 	debug ("## Transferring control to Linux (at address %08lx) ...\n",
-	       (ulong) theKernel);
+	       (ulong) kernel_entry);
 
 #if defined (CONFIG_SETUP_MEMORY_TAGS) || \
     defined (CONFIG_CMDLINE_TAG) || \
@@ -99,27 +147,76 @@ int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *ima
 	if (images->rd_start && images->rd_end)
 		setup_initrd_tag (bd, images->rd_start, images->rd_end);
 #endif
-	setup_end_tag (bd);
+	setup_end_tag(bd);
 #endif
 
-	/* we assume that the kernel is in place */
-	printf ("\nStarting kernel ...\n\n");
+	announce_and_cleanup();
 
-#ifdef CONFIG_USB_DEVICE
-	{
-		extern void udc_disconnect (void);
-		udc_disconnect ();
+	kernel_entry(0, machid, bd->bi_boot_params);
+	/* does not return */
+
+	return 1;
+}
+
+#if defined(CONFIG_OF_LIBFDT)
+static int fixup_memory_node(void *blob)
+{
+	bd_t	*bd = gd->bd;
+	int bank;
+	u64 start[CONFIG_NR_DRAM_BANKS];
+	u64 size[CONFIG_NR_DRAM_BANKS];
+
+	for (bank = 0; bank < CONFIG_NR_DRAM_BANKS; bank++) {
+		start[bank] = bd->bi_dram[bank].start;
+		size[bank] = bd->bi_dram[bank].size;
 	}
-#endif
 
-	cleanup_before_linux ();
+	return fdt_fixup_memory_banks(blob, start, size, CONFIG_NR_DRAM_BANKS);
+}
+
+static int bootm_linux_fdt(int machid, bootm_headers_t *images)
+{
+	ulong rd_len;
+	bd_t *bd = gd->bd;
+	char *s;
+	void (*kernel_entry)(int zero, int dt_machid, void *dtblob);
+	ulong bootmap_base = getenv_bootm_low();
+	ulong of_size = images->ft_len;
+	char **of_flat_tree = &images->ft_addr;
+	ulong *initrd_start = &images->initrd_start;
+	ulong *initrd_end = &images->initrd_end;
+	struct lmb *lmb = &images->lmb;
+	int ret;
+
+	kernel_entry = (void (*)(int, int, void *))images->ep;
+
+	rd_len = images->rd_end - images->rd_start;
+	ret = boot_ramdisk_high(lmb, images->rd_start, rd_len,
+				initrd_start, initrd_end);
+	if (ret)
+		return ret;
+
+	ret = boot_relocate_fdt(lmb, bootmap_base, of_flat_tree, &of_size);
+	if (ret)
+		return ret;
 
-	theKernel (0, machid, bd->bi_boot_params);
+	debug("## Transferring control to Linux (at address %08lx) ...\n",
+	       (ulong) kernel_entry);
+
+	fdt_chosen(*of_flat_tree, 1);
+
+	fixup_memory_node(*of_flat_tree);
+
+	fdt_initrd(*of_flat_tree, *initrd_start, *initrd_end, 1);
+
+	announce_and_cleanup();
+
+	kernel_entry(0, machid, *of_flat_tree);
 	/* does not return */
 
 	return 1;
 }
-
+#endif
 
 #if defined (CONFIG_SETUP_MEMORY_TAGS) || \
     defined (CONFIG_CMDLINE_TAG) || \
@@ -239,4 +336,12 @@ static void setup_end_tag (bd_t *bd)
 	params->hdr.size = 0;
 }
 
+static ulong get_sp(void)
+{
+	ulong ret;
+
+	asm("mov %0, sp" : "=r"(ret) : );
+	return ret;
+}
+
 #endif /* CONFIG_SETUP_MEMORY_TAGS || CONFIG_CMDLINE_TAG || CONFIG_INITRD_TAG */
-- 
1.7.1

[U-Boot] [PATCH v3 7/7] ARM: enable device tree for beagle

[John Rigby]

For testing ARM device tree support

Signed-off-by: John Rigby <john.rigby@linaro.org>
---
 include/configs/omap3_beagle.h |    9 +++++++++
 1 files changed, 9 insertions(+), 0 deletions(-)

diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index 2463be4..daf84c7 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -55,6 +55,15 @@
 #undef CONFIG_USE_IRQ				/* no support for IRQs */
 #define CONFIG_MISC_INIT_R
 
+#define CONFIG_OF_LIBFDT		1
+/*
+ * The early kernel mapping on ARM currently only maps from the base of DRAM
+ * to the end of the kernel image.  The kernel is loaded at DRAM base + 0x8000.
+ * The early kernel pagetable uses DRAM base + 0x4000 to DRAM base + 0x8000,
+ * so that leaves DRAM base to DRAM base + 0x4000 available.
+ */
+#define CONFIG_SYS_BOOTMAPSZ	        0x4000
+
 #define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
 #define CONFIG_SETUP_MEMORY_TAGS	1
 #define CONFIG_INITRD_TAG		1
-- 
1.7.1

[U-Boot] [PATCH v3 0/7] Add ARM flat device tree support

[Wolfgang Denk]

Dear John Rigby,

In message <1286999857-13790-1-git-send-email-john.rigby@linaro.org> you wrote:
> This new v3 series attempts to address all feedback received
> regarding v2.
> 
> Patch 1/7 and 2/7 (old 1/6) split in two with better
> commit message to explain what exactly the fixes do.
> Patch 3/7 (old 2/6) added CC to libfdt maintainer.
> Patch 4/7 (old 3/6) fixed patch and better commit message and
> added another CC.
> Patch 5/7 (old 4/6) changed the new CONFIG_*'s to CONFIG_SYS_*'s
> and documented them in README.
> Patch 6/7 (old 5/6) Removed redundant ifdef, better commit message.
> Patch 7/7 (old 6/6) Unchanged.

Plase check and confirm if my understanding of this series is correct:

Patch 1/7 and 2/7 affect generic code and go through me.

Patch 3/7 affects FDT code and goes through Gerry (or Gerry AKC's and
	tells me to pull it directly as part of the series).

Patch 4/7 affects generic code, plus NIOS2 and MicroBlace specific
	parts; it goes through me but needs ACKs from Scott McNutt and
	Michal Simek 

Patch 5/7 affects generic code and goes through me.

Patch 6/7 and 7/7 affect ARM code and go through the ARM custodian
	(which happens to be me ATM).


Is this understanding correct?   So you need the ACKs from Scott,
Michal, and Gerry...

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"I've finally learned what `upward compatible' means. It means we get
to keep all our old mistakes." - Dennie van Tassel

[U-Boot] [PATCH v3 0/7] Add ARM flat device tree support

[John Rigby]

On Wed, Oct 13, 2010 at 2:41 PM, Wolfgang Denk <wd@denx.de> wrote:
> Dear John Rigby,
>
> In message <1286999857-13790-1-git-send-email-john.rigby@linaro.org> you wrote:
>> This new v3 series attempts to address all feedback received
>> regarding v2.
>>
>> Patch 1/7 and 2/7 (old 1/6) split in two with better
>> commit message to explain what exactly the fixes do.
>> Patch 3/7 (old 2/6) added CC to libfdt maintainer.
>> Patch 4/7 (old 3/6) fixed patch and better commit message and
>> added another CC.
>> Patch 5/7 (old 4/6) changed the new CONFIG_*'s to CONFIG_SYS_*'s
>> and documented them in README.
>> Patch 6/7 (old 5/6) Removed redundant ifdef, better commit message.
>> Patch 7/7 (old 6/6) Unchanged.
>
> Plase check and confirm if my understanding of this series is correct:
>
> Patch 1/7 and 2/7 affect generic code and go through me.
>
> Patch 3/7 affects FDT code and goes through Gerry (or Gerry AKC's and
> ? ? ? ?tells me to pull it directly as part of the series).
>
> Patch 4/7 affects generic code, plus NIOS2 and MicroBlace specific
> ? ? ? ?parts; it goes through me but needs ACKs from Scott McNutt and
> ? ? ? ?Michal Simek
>
> Patch 5/7 affects generic code and goes through me.
>
> Patch 6/7 and 7/7 affect ARM code and go through the ARM custodian
> ? ? ? ?(which happens to be me ATM).
>
>
> Is this understanding correct? ? So you need the ACKs from Scott,
> Michal, and Gerry...
>
Yes I believe this is correct.

Thanks,
John

[U-Boot] [PATCH v3 4/7] FDT: only call boot_get_fdt from generic code

[Michal Simek]

John Rigby wrote:
> All arches except nios2 and microblaze call boot_get_fdt
> from bootm_start in common/cmd_bootm.c.
> 
> Having nios2 and microblaze do so as well removes code from
> their respective do_bootm_linux routines and allows removal of
> a nasty ifdef from bootm_start.
> 
> In the case where boot_get_fdt returns an error bootm_start
> returns and the platform specific do_bootm_linux routines
> will never get called.
> 
> Also only check argv[3] for an fdt addr if argc > 3 first.
> This is already the case for nios2.
> 
> Signed-off-by: John Rigby <john.rigby@linaro.org>
> CC: Scott McNutt <smcnutt@psyent.com>
> CC: Michal Simek <monstr@monstr.eu>
> CC: Thomas Chou <thomas@wytron.com.tw>
> ---
>  arch/microblaze/lib/bootm.c |   14 +++++---------

Acked-by: Michal Simek <monstr@monstr.eu>


-- 
Michal Simek, Ing. (M.Eng)
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel 2.6 Microblaze Linux - http://www.monstr.eu/fdt/
Microblaze U-BOOT custodian

[U-Boot] [PATCH v3 0/7] Add ARM flat device tree support

[Gerald Van Baren]

Dear John, Wolfgang,

The patch 4/7 looks good to me and runs on my MPC8360EMDS board (acked 
below).  Wolfgang, if you would pull this directly, I would appreciate it.

On 10/13/2010 04:41 PM, Wolfgang Denk wrote:
> Dear John Rigby,
>
> In message<1286999857-13790-1-git-send-email-john.rigby@linaro.org>  you wrote:
>> This new v3 series attempts to address all feedback received
>> regarding v2.
>>
>> Patch 1/7 and 2/7 (old 1/6) split in two with better
>> commit message to explain what exactly the fixes do.
>> Patch 3/7 (old 2/6) added CC to libfdt maintainer.
>> Patch 4/7 (old 3/6) fixed patch and better commit message and
>> added another CC.
>> Patch 5/7 (old 4/6) changed the new CONFIG_*'s to CONFIG_SYS_*'s
>> and documented them in README.
>> Patch 6/7 (old 5/6) Removed redundant ifdef, better commit message.
>> Patch 7/7 (old 6/6) Unchanged.
>
> Plase check and confirm if my understanding of this series is correct:
>
> Patch 1/7 and 2/7 affect generic code and go through me.
>
> Patch 3/7 affects FDT code and goes through Gerry (or Gerry AKC's and
> 	tells me to pull it directly as part of the series).

Acked-by: Gerald Van Baren <vanbaren@cideas.com>

[snip]

> Is this understanding correct?   So you need the ACKs from Scott,
> Michal, and Gerry...
>
> Best regards,
>
> Wolfgang Denk

Best regards,
gvb

[U-Boot] [PATCH v3 4/7] FDT: only call boot_get_fdt from generic code

[Thomas Chou]

John Rigby wrote:
> All arches except nios2 and microblaze call boot_get_fdt
> from bootm_start in common/cmd_bootm.c.
> 
> Having nios2 and microblaze do so as well removes code from
> their respective do_bootm_linux routines and allows removal of
> a nasty ifdef from bootm_start.
> 
> In the case where boot_get_fdt returns an error bootm_start
> returns and the platform specific do_bootm_linux routines
> will never get called.
> 
> Also only check argv[3] for an fdt addr if argc > 3 first.
> This is already the case for nios2.
> 
> Signed-off-by: John Rigby <john.rigby@linaro.org>
> CC: Scott McNutt <smcnutt@psyent.com>
> CC: Michal Simek <monstr@monstr.eu>
> CC: Thomas Chou <thomas@wytron.com.tw>
> ---
>  arch/nios2/lib/bootm.c      |    8 +++-----

Tested with/without libfdt support on nios2 board.
Tested-by: Thomas Chou <thomas@wytron.com.tw>

[U-Boot] [PATCH v3 1/7] common/image.c fix length calculation in boot_relocate_fdt

[Wolfgang Denk]

Dear John Rigby,

In message <1286999857-13790-2-git-send-email-john.rigby@linaro.org> you wrote:
> boot_relocate_fdt is called on platforms with CONFIG_SYS_BOOTMAPSZ
> defined to relocate the device tree blob to be inside the
> boot map area between bootmap_base and bootmap_base+CONFIG_SYS_BOOTMAPSZ.
> 
> For the case where the blob needs to be relocated, space is
> allocated inside the bootmap by calling lmb_alloc_base with
> size passed in plus some padding:
> 
>     of_len = *of_size + CONFIG_SYS_FDT_PAD;
> 
> For the case where the blob is already inside the bounds of the boot map
> area, lmb_reserve is called to reserve the the space where the blob is
> already residing.  The calculation for this case is currently:
> 
>     of_len = (CONFIG_SYS_BOOTMAPSZ + bootmap_base) - (ulong)fdt_blob;
> 
> This is wrong because it reserves all the space in the boot map area
> from the blob to the end ignoring completely the actual size. The
> worst case is where the blob is at the beginning and the entire boot map
> area get reserved. Fix this by changing the length calculation to this:
> 
>     of_len = *of_size + CONFIG_SYS_FDT_PAD;
> 
> This bug has likely never manifested itself because bootm has never
> been called with the fdt blob already in the bootmap area.  In my
> testing on an OMAP3 beagle board I initially worked around the bug
> by simply moving the initial location of the fdt blob.  I have tested
> with the new calculation with the fdt blob both inside and outside
> the boot map area.
> 
> Signed-off-by: John Rigby <john.rigby@linaro.org>
> ---
>  common/image.c |    2 +-
>  1 files changed, 1 insertions(+), 1 deletions(-)

Applied to u-boot-arm, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
An expert is a person who avoids the small errors while  sweeping  on
to the grand fallacy.

[U-Boot] [PATCH v3 2/7] common/image.c remove extra calls to be32_to_cpu in boot_get_fdt

[Wolfgang Denk]

Dear John Rigby,

In message <1286999857-13790-3-git-send-email-john.rigby@linaro.org> you wrote:
> fdt_totalsize returns size in cpu endian so don't call be32_to_cpu
> on the result.  This was harmless on big endian platforms but not
> on little endian ARMs.
> 
> Signed-off-by: John Rigby <john.rigby@linaro.org>
> ---
>  common/image.c |    4 ++--
>  1 files changed, 2 insertions(+), 2 deletions(-)

Applied to u-boot-arm, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
[Braddock:] Mr. Churchill, you are drunk.
[Churchill:] And you madam, are ugly.  But I shall be sober tomorrow.

[U-Boot] [PATCH v3 3/7] FDT: Add fixup support for multiple banks of memory

[Wolfgang Denk]

Dear John Rigby,

In message <1286999857-13790-4-git-send-email-john.rigby@linaro.org> you wrote:
> Add fdt_fixup_memory_banks and reimplement fdt_fixup_memory
> using it.  Tested on OMAP3 beagle board with two banks of
> memory.
> 
> Signed-off-by: John Rigby <john.rigby@linaro.org>
> CC: Jerry Van Baren <vanbaren@cideas.com>
> ---
>  common/fdt_support.c  |   86 ++++++++++++++++++++++++++-----------------------
>  include/fdt_support.h |    1 +
>  2 files changed, 47 insertions(+), 40 deletions(-)

Applied to u-boot-arm, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Speculation is always more interesting than facts.
                                    - Terry Pratchett, _Making_Money_

[U-Boot] [PATCH v3 4/7] FDT: only call boot_get_fdt from generic code

[Wolfgang Denk]

Dear John Rigby,

In message <1286999857-13790-5-git-send-email-john.rigby@linaro.org> you wrote:
> All arches except nios2 and microblaze call boot_get_fdt
> from bootm_start in common/cmd_bootm.c.
> 
> Having nios2 and microblaze do so as well removes code from
> their respective do_bootm_linux routines and allows removal of
> a nasty ifdef from bootm_start.
> 
> In the case where boot_get_fdt returns an error bootm_start
> returns and the platform specific do_bootm_linux routines
> will never get called.
> 
> Also only check argv[3] for an fdt addr if argc > 3 first.
> This is already the case for nios2.
> 
> Signed-off-by: John Rigby <john.rigby@linaro.org>
> CC: Scott McNutt <smcnutt@psyent.com>
> CC: Michal Simek <monstr@monstr.eu>
> CC: Thomas Chou <thomas@wytron.com.tw>
> ---
>  arch/microblaze/lib/bootm.c |   14 +++++---------
>  arch/nios2/lib/bootm.c      |    8 +++-----
>  common/cmd_bootm.c          |    2 --
>  3 files changed, 8 insertions(+), 16 deletions(-)

Applied to u-boot-arm, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
There's no sense in being precise  when  you  don't  even  know  what
you're talking about.                             -- John von Neumann

[U-Boot] [PATCH v3 5/7] boot: change some arch ifdefs to feature ifdefs

[Wolfgang Denk]

Dear John Rigby,

In message <1286999857-13790-6-git-send-email-john.rigby@linaro.org> you wrote:
> The routines boot_ramdisk_high, boot_get_cmdline and boot_get_kbd
> are currently enabled by various combinations of CONFIG_M68K,
> CONFIG_POWERPC and CONFIG_SPARC.
> 
> Use CONFIG_SYS_BOOT_<FEATURE> defines instead.
> 
> CONFIG_SYS_BOOT_RAMDISK_HIGH
> CONFIG_SYS_BOOT_GET_CMDLINE
> CONFIG_SYS_BOOT_GET_KBD
> 
> Define these as appropriate in arch/include/asm/config.h files.
> 
> Signed-off-by: John Rigby <john.rigby@linaro.org>
> ---
>  README                            |   13 +++++++++++++
>  arch/m68k/include/asm/config.h    |    3 +++
>  arch/powerpc/include/asm/config.h |    3 +++
>  arch/sparc/include/asm/config.h   |    1 +
>  common/cmd_bootm.c                |    4 ++--
>  common/image.c                    |   10 ++++++----
>  include/image.h                   |    9 ++++++---
>  7 files changed, 34 insertions(+), 9 deletions(-)

Applied to u-boot-arm, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
There is a multi-legged creature crawling on your shoulder.
	-- Spock, "A Taste of Armageddon", stardate 3193.9

[U-Boot] [PATCH v3 6/7] ARM: add flat device tree support

[Wolfgang Denk]

Dear John Rigby,

In message <1286999857-13790-7-git-send-email-john.rigby@linaro.org> you wrote:
> Based on other architectures already supported.
> Tested on OMAP3 Beagle board and another unnamed ARM platform.
> 
> Signed-off-by: John Rigby <john.rigby@linaro.org>
> Tested-by: Rob Herring <rob.herring@smooth-stone.com>
> ---
>  arch/arm/include/asm/config.h |    2 +
>  arch/arm/lib/bootm.c          |  137 ++++++++++++++++++++++++++++++++++++-----
>  2 files changed, 123 insertions(+), 16 deletions(-)

Applied to u-boot-arm, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Disobedience:  The silver lining to the cloud of servitude.
- Ambrose Bierce

[U-Boot] [PATCH v3 7/7] ARM: enable device tree for beagle

[Wolfgang Denk]

Dear John Rigby,

In message <1286999857-13790-8-git-send-email-john.rigby@linaro.org> you wrote:
> For testing ARM device tree support
> 
> Signed-off-by: John Rigby <john.rigby@linaro.org>
> ---
>  include/configs/omap3_beagle.h |    9 +++++++++
>  1 files changed, 9 insertions(+), 0 deletions(-)

Applied to u-boot-arm, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"The one charm of marriage is that it makes a  life  of  deception  a
neccessity."                                            - Oscar Wilde

[U-Boot] [PATCH] common/fdt_support.c: Fix compile warnings

[Wolfgang Denk]

Commit a6bd9e8 "FDT: Add fixup support for multiple banks of memory"
removed code but forgot to remove the variables used by it, resulting
in warnings:

fdt_support.c: In function 'fdt_fixup_memory_banks':
fdt_support.c:399: warning: unused variable 'sizecell'
fdt_support.c:399: warning: unused variable 'addrcell'

Remove the declarations, too.

Signed-off-by: Wolfgang Denk <wd@denx.de>
---
 common/fdt_support.c |    1 -
 1 files changed, 0 insertions(+), 1 deletions(-)

diff --git a/common/fdt_support.c b/common/fdt_support.c
index 90e9097..5829afd 100644
--- a/common/fdt_support.c
+++ b/common/fdt_support.c
@@ -396,7 +396,6 @@ int fdt_fixup_memory_banks(void *blob, u64 start[], u64 size[], int banks)
 	int addr_cell_len, size_cell_len, len;
 	u8 tmp[banks * 8];
 	int bank;
-	const u32 *addrcell, *sizecell;
 
 	err = fdt_check_header(blob);
 	if (err < 0) {
-- 
1.7.2.3