* [PATCH] input: bcm5974: Add support for MacBookAir3
@ 2010-11-09 16:38 Henrik Rydberg
2010-11-11 8:39 ` Dmitry Torokhov
0 siblings, 1 reply; 3+ messages in thread
From: Henrik Rydberg @ 2010-11-09 16:38 UTC (permalink / raw)
To: Dmitry Torokhov
Cc: Jiri Kosina, linux-input, linux-kernel, Edgar (gimli) Hucek,
stable, Henrik Rydberg
From: Edgar (gimli) Hucek <gimli@dark-green.com>
This patch adds support for the MacBookAir3,1 and MacBookAir3,2
models.
[rydberg@euromail.se: touchpad range calibration]
Cc: stable@kernel.org
Signed-off-by: Edgar (gimli) Hucek <gimli@dark-green.com>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
---
Hi Dmitry, Jiri,
This patch was seen on lkml last week, and has now been excercised by
a larger set of users. As usual, this patch should go before or
together with the HID changes, so as not to break basic support from
the non-MT HID driver.
Cheers,
Henrik
drivers/input/mouse/bcm5974.c | 40 ++++++++++++++++++++++++++++++++++++++++
1 files changed, 40 insertions(+), 0 deletions(-)
diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c
index b952317..ee82851 100644
--- a/drivers/input/mouse/bcm5974.c
+++ b/drivers/input/mouse/bcm5974.c
@@ -55,6 +55,14 @@
#define USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI 0x0236
#define USB_DEVICE_ID_APPLE_WELLSPRING3_ISO 0x0237
#define USB_DEVICE_ID_APPLE_WELLSPRING3_JIS 0x0238
+/* MacbookAir3,2 (unibody), aka wellspring5 */
+#define USB_DEVICE_ID_APPLE_WELLSPRING4_ANSI 0x023f
+#define USB_DEVICE_ID_APPLE_WELLSPRING4_ISO 0x0240
+#define USB_DEVICE_ID_APPLE_WELLSPRING4_JIS 0x0241
+/* MacbookAir3,1 (unibody), aka wellspring4 */
+#define USB_DEVICE_ID_APPLE_WELLSPRING4A_ANSI 0x0242
+#define USB_DEVICE_ID_APPLE_WELLSPRING4A_ISO 0x0243
+#define USB_DEVICE_ID_APPLE_WELLSPRING4A_JIS 0x0244
#define BCM5974_DEVICE(prod) { \
.match_flags = (USB_DEVICE_ID_MATCH_DEVICE | \
@@ -80,6 +88,14 @@ static const struct usb_device_id bcm5974_table[] = {
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI),
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING3_ISO),
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING3_JIS),
+ /* MacbookAir3,2 */
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING4_ANSI),
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING4_ISO),
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING4_JIS),
+ /* MacbookAir3,1 */
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING4A_ANSI),
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING4A_ISO),
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING4A_JIS),
/* Terminating entry */
{}
};
@@ -234,6 +250,30 @@ static const struct bcm5974_config bcm5974_config_table[] = {
{ DIM_X, DIM_X / SN_COORD, -4460, 5166 },
{ DIM_Y, DIM_Y / SN_COORD, -75, 6700 }
},
+ {
+ USB_DEVICE_ID_APPLE_WELLSPRING4_ANSI,
+ USB_DEVICE_ID_APPLE_WELLSPRING4_ISO,
+ USB_DEVICE_ID_APPLE_WELLSPRING4_JIS,
+ HAS_INTEGRATED_BUTTON,
+ 0x84, sizeof(struct bt_data),
+ 0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS,
+ { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 300 },
+ { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 },
+ { DIM_X, DIM_X / SN_COORD, -4620, 5140 },
+ { DIM_Y, DIM_Y / SN_COORD, -150, 6600 }
+ },
+ {
+ USB_DEVICE_ID_APPLE_WELLSPRING4A_ANSI,
+ USB_DEVICE_ID_APPLE_WELLSPRING4A_ISO,
+ USB_DEVICE_ID_APPLE_WELLSPRING4A_JIS,
+ HAS_INTEGRATED_BUTTON,
+ 0x84, sizeof(struct bt_data),
+ 0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS,
+ { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 300 },
+ { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 },
+ { DIM_X, DIM_X / SN_COORD, -4616, 5112 },
+ { DIM_Y, DIM_Y / SN_COORD, -142, 5234 }
+ },
{}
};
--
1.7.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] input: bcm5974: Add support for MacBookAir3
2010-11-09 16:38 [PATCH] input: bcm5974: Add support for MacBookAir3 Henrik Rydberg
@ 2010-11-11 8:39 ` Dmitry Torokhov
2010-11-15 13:18 ` Jiri Kosina
0 siblings, 1 reply; 3+ messages in thread
From: Dmitry Torokhov @ 2010-11-11 8:39 UTC (permalink / raw)
To: Henrik Rydberg
Cc: Jiri Kosina, linux-input, linux-kernel, Edgar (gimli) Hucek, stable
On Tue, Nov 09, 2010 at 05:38:42PM +0100, Henrik Rydberg wrote:
> From: Edgar (gimli) Hucek <gimli@dark-green.com>
>
> This patch adds support for the MacBookAir3,1 and MacBookAir3,2
> models.
>
> [rydberg@euromail.se: touchpad range calibration]
> Cc: stable@kernel.org
> Signed-off-by: Edgar (gimli) Hucek <gimli@dark-green.com>
> Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
> ---
> Hi Dmitry, Jiri,
>
> This patch was seen on lkml last week, and has now been excercised by
> a larger set of users. As usual, this patch should go before or
> together with the HID changes, so as not to break basic support from
> the non-MT HID driver.
>
Jiri,
It looks like HID changes are more than simply adding USB device IDs so
it woudl make sense to merge through your tree,
Thanks.
> Cheers,
> Henrik
>
> drivers/input/mouse/bcm5974.c | 40 ++++++++++++++++++++++++++++++++++++++++
> 1 files changed, 40 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c
> index b952317..ee82851 100644
> --- a/drivers/input/mouse/bcm5974.c
> +++ b/drivers/input/mouse/bcm5974.c
> @@ -55,6 +55,14 @@
> #define USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI 0x0236
> #define USB_DEVICE_ID_APPLE_WELLSPRING3_ISO 0x0237
> #define USB_DEVICE_ID_APPLE_WELLSPRING3_JIS 0x0238
> +/* MacbookAir3,2 (unibody), aka wellspring5 */
> +#define USB_DEVICE_ID_APPLE_WELLSPRING4_ANSI 0x023f
> +#define USB_DEVICE_ID_APPLE_WELLSPRING4_ISO 0x0240
> +#define USB_DEVICE_ID_APPLE_WELLSPRING4_JIS 0x0241
> +/* MacbookAir3,1 (unibody), aka wellspring4 */
> +#define USB_DEVICE_ID_APPLE_WELLSPRING4A_ANSI 0x0242
> +#define USB_DEVICE_ID_APPLE_WELLSPRING4A_ISO 0x0243
> +#define USB_DEVICE_ID_APPLE_WELLSPRING4A_JIS 0x0244
>
> #define BCM5974_DEVICE(prod) { \
> .match_flags = (USB_DEVICE_ID_MATCH_DEVICE | \
> @@ -80,6 +88,14 @@ static const struct usb_device_id bcm5974_table[] = {
> BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI),
> BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING3_ISO),
> BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING3_JIS),
> + /* MacbookAir3,2 */
> + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING4_ANSI),
> + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING4_ISO),
> + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING4_JIS),
> + /* MacbookAir3,1 */
> + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING4A_ANSI),
> + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING4A_ISO),
> + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING4A_JIS),
> /* Terminating entry */
> {}
> };
> @@ -234,6 +250,30 @@ static const struct bcm5974_config bcm5974_config_table[] = {
> { DIM_X, DIM_X / SN_COORD, -4460, 5166 },
> { DIM_Y, DIM_Y / SN_COORD, -75, 6700 }
> },
> + {
> + USB_DEVICE_ID_APPLE_WELLSPRING4_ANSI,
> + USB_DEVICE_ID_APPLE_WELLSPRING4_ISO,
> + USB_DEVICE_ID_APPLE_WELLSPRING4_JIS,
> + HAS_INTEGRATED_BUTTON,
> + 0x84, sizeof(struct bt_data),
> + 0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS,
> + { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 300 },
> + { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 },
> + { DIM_X, DIM_X / SN_COORD, -4620, 5140 },
> + { DIM_Y, DIM_Y / SN_COORD, -150, 6600 }
> + },
> + {
> + USB_DEVICE_ID_APPLE_WELLSPRING4A_ANSI,
> + USB_DEVICE_ID_APPLE_WELLSPRING4A_ISO,
> + USB_DEVICE_ID_APPLE_WELLSPRING4A_JIS,
> + HAS_INTEGRATED_BUTTON,
> + 0x84, sizeof(struct bt_data),
> + 0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS,
> + { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 300 },
> + { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 },
> + { DIM_X, DIM_X / SN_COORD, -4616, 5112 },
> + { DIM_Y, DIM_Y / SN_COORD, -142, 5234 }
> + },
> {}
> };
>
> --
> 1.7.1
>
--
Dmitry
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] input: bcm5974: Add support for MacBookAir3
2010-11-11 8:39 ` Dmitry Torokhov
@ 2010-11-15 13:18 ` Jiri Kosina
0 siblings, 0 replies; 3+ messages in thread
From: Jiri Kosina @ 2010-11-15 13:18 UTC (permalink / raw)
To: Dmitry Torokhov
Cc: Henrik Rydberg, linux-input, linux-kernel, Edgar (gimli) Hucek, stable
On Thu, 11 Nov 2010, Dmitry Torokhov wrote:
> On Tue, Nov 09, 2010 at 05:38:42PM +0100, Henrik Rydberg wrote:
> > From: Edgar (gimli) Hucek <gimli@dark-green.com>
> >
> > This patch adds support for the MacBookAir3,1 and MacBookAir3,2
> > models.
> >
> > [rydberg@euromail.se: touchpad range calibration]
> > Cc: stable@kernel.org
> > Signed-off-by: Edgar (gimli) Hucek <gimli@dark-green.com>
> > Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
> > ---
> > Hi Dmitry, Jiri,
> >
> > This patch was seen on lkml last week, and has now been excercised by
> > a larger set of users. As usual, this patch should go before or
> > together with the HID changes, so as not to break basic support from
> > the non-MT HID driver.
> >
>
> Jiri,
>
> It looks like HID changes are more than simply adding USB device IDs so
> it woudl make sense to merge through your tree,
Hi guys,
makes sense. I already have the HID bits in my tree, and will apply the
bcm5974 part as well.
Thanks,
--
Jiri Kosina
SUSE Labs, Novell Inc.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2010-11-15 13:18 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-11-09 16:38 [PATCH] input: bcm5974: Add support for MacBookAir3 Henrik Rydberg
2010-11-11 8:39 ` Dmitry Torokhov
2010-11-15 13:18 ` Jiri Kosina
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.