* [PATCH v8 00/15] ARM: mxs: Add initial support for MX23 and MX28
@ 2010-12-20 14:57 Shawn Guo
2010-12-20 14:57 ` [PATCH v8 05/15] ARM: mxs: Add low-level debug UART support Shawn Guo
` (7 more replies)
0 siblings, 8 replies; 23+ messages in thread
From: Shawn Guo @ 2010-12-20 14:57 UTC (permalink / raw)
To: linux-arm-kernel
Changes for v8:
- Reuse debug-pl01x.S as mxs DUART is just an amba-pl011
- Remove extra space in iomux.c
- Remove uncessary line breaker in mach-mx23evk.c
[PATCH v8 05/15] ARM: mxs: Add low-level debug UART support
[PATCH v8 08/15] ARM: mxs: Add iomux support
[PATCH v8 13/15] ARM: mxs: Add initial mx23evk support
Thanks for the review comments.
Regards,
Shawn
^ permalink raw reply [flat|nested] 23+ messages in thread* [PATCH v8 05/15] ARM: mxs: Add low-level debug UART support 2010-12-20 14:57 [PATCH v8 00/15] ARM: mxs: Add initial support for MX23 and MX28 Shawn Guo @ 2010-12-20 14:57 ` Shawn Guo 2010-12-20 14:57 ` [PATCH v8 08/15] ARM: mxs: Add iomux support Shawn Guo ` (6 subsequent siblings) 7 siblings, 0 replies; 23+ messages in thread From: Shawn Guo @ 2010-12-20 14:57 UTC (permalink / raw) To: linux-arm-kernel - DEBUG_LL support, which is incompatible with multi-soc MXS image because of different DUART base address on MX23 and MX28 - uncompress message support Signed-off-by: Shawn Guo <shawn.guo@freescale.com> --- Changes for v8: - Reuse debug-pl01x.S as mxs DUART is just an amba-pl011 Changes for v7: - Add namespace for uart_base and UART() Changes for v3: - debug-macro.S: change inclusion of hardware.h to mx23.h plus mx28.h - Remove #define __MXS_BOOT_UNCOMPRESS - Add namespace MXS_DUART_ for macros - Add comment "If it's not, the output is simply discarded." Changes for v2: - Remove incorrect comments arch/arm/mach-mxs/include/mach/debug-macro.S | 38 +++++++++++++ arch/arm/mach-mxs/include/mach/uncompress.h | 76 ++++++++++++++++++++++++++ 2 files changed, 114 insertions(+), 0 deletions(-) create mode 100644 arch/arm/mach-mxs/include/mach/debug-macro.S create mode 100644 arch/arm/mach-mxs/include/mach/uncompress.h diff --git a/arch/arm/mach-mxs/include/mach/debug-macro.S b/arch/arm/mach-mxs/include/mach/debug-macro.S new file mode 100644 index 0000000..79650a1 --- /dev/null +++ b/arch/arm/mach-mxs/include/mach/debug-macro.S @@ -0,0 +1,38 @@ +/* arch/arm/mach-mxs/include/mach/debug-macro.S + * + * Debugging macro include header + * + * Copyright (C) 1994-1999 Russell King + * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <mach/mx23.h> +#include <mach/mx28.h> + +#ifdef CONFIG_SOC_IMX23 +#ifdef UART_PADDR +#error "CONFIG_DEBUG_LL is incompatible with multiple archs" +#endif +#define UART_PADDR MX23_DUART_BASE_ADDR +#endif + +#ifdef CONFIG_SOC_IMX28 +#ifdef UART_PADDR +#error "CONFIG_DEBUG_LL is incompatible with multiple archs" +#endif +#define UART_PADDR MX28_DUART_BASE_ADDR +#endif + +#define UART_VADDR MXS_IO_ADDRESS(UART_PADDR) + + .macro addruart, rp, rv + ldr \rp, =UART_PADDR @ physical + ldr \rv, =UART_VADDR @ virtual + .endm + +#include <asm/hardware/debug-pl01x.S> diff --git a/arch/arm/mach-mxs/include/mach/uncompress.h b/arch/arm/mach-mxs/include/mach/uncompress.h new file mode 100644 index 0000000..a005e76 --- /dev/null +++ b/arch/arm/mach-mxs/include/mach/uncompress.h @@ -0,0 +1,76 @@ +/* + * arch/arm/mach-mxs/include/mach/uncompress.h + * + * Copyright (C) 1999 ARM Limited + * Copyright (C) Shane Nay (shane at minirl.com) + * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#ifndef __MACH_MXS_UNCOMPRESS_H__ +#define __MACH_MXS_UNCOMPRESS_H__ + +#include <asm/mach-types.h> + +static unsigned long mxs_duart_base; + +#define MXS_DUART(x) (*(volatile unsigned long *)(mxs_duart_base + (x))) + +#define MXS_DUART_DR 0x00 +#define MXS_DUART_FR 0x18 +#define MXS_DUART_FR_TXFE (1 << 7) +#define MXS_DUART_CR 0x30 +#define MXS_DUART_CR_UARTEN (1 << 0) + +/* + * The following code assumes the serial port has already been + * initialized by the bootloader. If it's not, the output is + * simply discarded. + */ + +static void putc(int ch) +{ + if (!mxs_duart_base) + return; + if (!(MXS_DUART(MXS_DUART_CR) & MXS_DUART_CR_UARTEN)) + return; + + while (!(MXS_DUART(MXS_DUART_FR) & MXS_DUART_FR_TXFE)) + barrier(); + + MXS_DUART(MXS_DUART_DR) = ch; +} + +static inline void flush(void) +{ +} + +#define MX23_DUART_BASE_ADDR 0x80070000 +#define MX28_DUART_BASE_ADDR 0x80074000 + +static inline void __arch_decomp_setup(unsigned long arch_id) +{ + switch (arch_id) { + case MACH_TYPE_MX23EVK: + mxs_duart_base = MX23_DUART_BASE_ADDR; + break; + case MACH_TYPE_MX28EVK: + mxs_duart_base = MX28_DUART_BASE_ADDR; + break; + default: + break; + } +} + +#define arch_decomp_setup() __arch_decomp_setup(arch_id) +#define arch_decomp_wdog() + +#endif /* __MACH_MXS_UNCOMPRESS_H__ */ -- 1.7.1 ^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH v8 08/15] ARM: mxs: Add iomux support 2010-12-20 14:57 [PATCH v8 00/15] ARM: mxs: Add initial support for MX23 and MX28 Shawn Guo 2010-12-20 14:57 ` [PATCH v8 05/15] ARM: mxs: Add low-level debug UART support Shawn Guo @ 2010-12-20 14:57 ` Shawn Guo 2010-12-20 14:57 ` [PATCH v8 13/15] ARM: mxs: Add initial mx23evk support Shawn Guo ` (5 subsequent siblings) 7 siblings, 0 replies; 23+ messages in thread From: Shawn Guo @ 2010-12-20 14:57 UTC (permalink / raw) To: linux-arm-kernel MXS-based SoCs implements iomux functions in block PINCTRL. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> --- Changes for v8 - Remove extra space Changes for v7 - Define naked pad and introduce validity bits for mA/vol/pull to ease the pad modification - List all pad definitions at once generated from Freescale pinmux Excel sheet Changes for v6: - Use __mxs_setl() and __mxs_clrl() for bit set/clear Changes for v5: - Change iomux_cfg_t from u64 to u16 - Add namespace MXS_ to shift, mask, and pad definitions - Use SET/CLR register for 1 bit setting - Get "if" and "{" at the same line - Remove space in middle of tabs - Change "setups" to "configures" in comments Changes for v3: - Change iomux_cfg_t to u64 to facilitate adding platform specific pad_ctrl settings to an existing pad definition - Change inclusion of hardware.h to mxs.h - Get iomux_base a hard-assignment in mxs_iomux_setup_pad(), since mx23 and mx28 share the common pinctrl base adress and it's only used in mxs_iomux_setup_pad(). - Remove EXPORT_SYMBOL and the static of mxs_iomux_setup_pad() Changes for v2: - Define iomux_cfg_t as u64 - Turn mxs_iomux_setup_pad() into a static function - Fix a bug in mxs_iomux_setup_pad(), muxsel starts at offset 0x100 than 0 of pinctrl block. arch/arm/mach-mxs/include/mach/iomux-mx23.h | 355 ++++++++++++++++++ arch/arm/mach-mxs/include/mach/iomux-mx28.h | 537 +++++++++++++++++++++++++++ arch/arm/mach-mxs/include/mach/iomux.h | 165 ++++++++ arch/arm/mach-mxs/iomux.c | 101 +++++ 4 files changed, 1158 insertions(+), 0 deletions(-) create mode 100644 arch/arm/mach-mxs/include/mach/iomux-mx23.h create mode 100644 arch/arm/mach-mxs/include/mach/iomux-mx28.h create mode 100644 arch/arm/mach-mxs/include/mach/iomux.h create mode 100644 arch/arm/mach-mxs/iomux.c diff --git a/arch/arm/mach-mxs/include/mach/iomux-mx23.h b/arch/arm/mach-mxs/include/mach/iomux-mx23.h new file mode 100644 index 0000000..94e5dd8 --- /dev/null +++ b/arch/arm/mach-mxs/include/mach/iomux-mx23.h @@ -0,0 +1,355 @@ +/* + * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com> + * Copyright (C) 2010 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#ifndef __MACH_IOMUX_MX23_H__ +#define __MACH_IOMUX_MX23_H__ + +#include <mach/iomux.h> + +/* + * The naming convention for the pad modes is MX23_PAD_<padname>__<padmode> + * If <padname> or <padmode> refers to a GPIO, it is named GPIO_<unit>_<num> + * See also iomux.h + * + * BANK PIN MUX + */ +/* MUXSEL_0 */ +#define MX23_PAD_GPMI_D00__GPMI_D00 MXS_IOMUX_PAD_NAKED(0, 0, PAD_MUXSEL_0) +#define MX23_PAD_GPMI_D01__GPMI_D01 MXS_IOMUX_PAD_NAKED(0, 1, PAD_MUXSEL_0) +#define MX23_PAD_GPMI_D02__GPMI_D02 MXS_IOMUX_PAD_NAKED(0, 2, PAD_MUXSEL_0) +#define MX23_PAD_GPMI_D03__GPMI_D03 MXS_IOMUX_PAD_NAKED(0, 3, PAD_MUXSEL_0) +#define MX23_PAD_GPMI_D04__GPMI_D04 MXS_IOMUX_PAD_NAKED(0, 4, PAD_MUXSEL_0) +#define MX23_PAD_GPMI_D05__GPMI_D05 MXS_IOMUX_PAD_NAKED(0, 5, PAD_MUXSEL_0) +#define MX23_PAD_GPMI_D06__GPMI_D06 MXS_IOMUX_PAD_NAKED(0, 6, PAD_MUXSEL_0) +#define MX23_PAD_GPMI_D07__GPMI_D07 MXS_IOMUX_PAD_NAKED(0, 7, PAD_MUXSEL_0) +#define MX23_PAD_GPMI_D08__GPMI_D08 MXS_IOMUX_PAD_NAKED(0, 8, PAD_MUXSEL_0) +#define MX23_PAD_GPMI_D09__GPMI_D09 MXS_IOMUX_PAD_NAKED(0, 9, PAD_MUXSEL_0) +#define MX23_PAD_GPMI_D10__GPMI_D10 MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_0) +#define MX23_PAD_GPMI_D11__GPMI_D11 MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_0) +#define MX23_PAD_GPMI_D12__GPMI_D12 MXS_IOMUX_PAD_NAKED(0, 12, PAD_MUXSEL_0) +#define MX23_PAD_GPMI_D13__GPMI_D13 MXS_IOMUX_PAD_NAKED(0, 13, PAD_MUXSEL_0) +#define MX23_PAD_GPMI_D14__GPMI_D14 MXS_IOMUX_PAD_NAKED(0, 14, PAD_MUXSEL_0) +#define MX23_PAD_GPMI_D15__GPMI_D15 MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_0) +#define MX23_PAD_GPMI_CLE__GPMI_CLE MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_0) +#define MX23_PAD_GPMI_ALE__GPMI_ALE MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_0) +#define MX23_PAD_GPMI_CE2N__GPMI_CE2N MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_0) +#define MX23_PAD_GPMI_RDY0__GPMI_RDY0 MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_0) +#define MX23_PAD_GPMI_RDY1__GPMI_RDY1 MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_0) +#define MX23_PAD_GPMI_RDY2__GPMI_RDY2 MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_0) +#define MX23_PAD_GPMI_RDY3__GPMI_RDY3 MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_0) +#define MX23_PAD_GPMI_WPN__GPMI_WPN MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_0) +#define MX23_PAD_GPMI_WRN__GPMI_WRN MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_0) +#define MX23_PAD_GPMI_RDN__GPMI_RDN MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_0) +#define MX23_PAD_AUART1_CTS__AUART1_CTS MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_0) +#define MX23_PAD_AUART1_RTS__AUART1_RTS MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_0) +#define MX23_PAD_AUART1_RX__AUART1_RX MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_0) +#define MX23_PAD_AUART1_TX__AUART1_TX MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_0) +#define MX23_PAD_I2C_SCL__I2C_SCL MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_0) +#define MX23_PAD_I2C_SDA__I2C_SDA MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_0) + +#define MX23_PAD_LCD_D00__LCD_D00 MXS_IOMUX_PAD_NAKED(1, 0, PAD_MUXSEL_0) +#define MX23_PAD_LCD_D01__LCD_D01 MXS_IOMUX_PAD_NAKED(1, 1, PAD_MUXSEL_0) +#define MX23_PAD_LCD_D02__LCD_D02 MXS_IOMUX_PAD_NAKED(1, 2, PAD_MUXSEL_0) +#define MX23_PAD_LCD_D03__LCD_D03 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_0) +#define MX23_PAD_LCD_D04__LCD_D04 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_0) +#define MX23_PAD_LCD_D05__LCD_D05 MXS_IOMUX_PAD_NAKED(1, 5, PAD_MUXSEL_0) +#define MX23_PAD_LCD_D06__LCD_D06 MXS_IOMUX_PAD_NAKED(1, 6, PAD_MUXSEL_0) +#define MX23_PAD_LCD_D07__LCD_D07 MXS_IOMUX_PAD_NAKED(1, 7, PAD_MUXSEL_0) +#define MX23_PAD_LCD_D08__LCD_D08 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_0) +#define MX23_PAD_LCD_D09__LCD_D09 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_0) +#define MX23_PAD_LCD_D10__LCD_D10 MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_0) +#define MX23_PAD_LCD_D11__LCD_D11 MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_0) +#define MX23_PAD_LCD_D12__LCD_D12 MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_0) +#define MX23_PAD_LCD_D13__LCD_D13 MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_0) +#define MX23_PAD_LCD_D14__LCD_D14 MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_0) +#define MX23_PAD_LCD_D15__LCD_D15 MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_0) +#define MX23_PAD_LCD_D16__LCD_D16 MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_0) +#define MX23_PAD_LCD_D17__LCD_D17 MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_0) +#define MX23_PAD_LCD_RESET__LCD_RESET MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_0) +#define MX23_PAD_LCD_RS__LCD_RS MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_0) +#define MX23_PAD_LCD_WR__LCD_WR MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_0) +#define MX23_PAD_LCD_CS__LCD_CS MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_0) +#define MX23_PAD_LCD_DOTCK__LCD_DOTCK MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_0) +#define MX23_PAD_LCD_ENABLE__LCD_ENABLE MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_0) +#define MX23_PAD_LCD_HSYNC__LCD_HSYNC MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_0) +#define MX23_PAD_LCD_VSYNC__LCD_VSYNC MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_0) +#define MX23_PAD_PWM0__PWM0 MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_0) +#define MX23_PAD_PWM1__PWM1 MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_0) +#define MX23_PAD_PWM2__PWM2 MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_0) +#define MX23_PAD_PWM3__PWM3 MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_0) +#define MX23_PAD_PWM4__PWM4 MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_0) + +#define MX23_PAD_SSP1_CMD__SSP1_CMD MXS_IOMUX_PAD_NAKED(2, 0, PAD_MUXSEL_0) +#define MX23_PAD_SSP1_DETECT__SSP1_DETECT MXS_IOMUX_PAD_NAKED(2, 1, PAD_MUXSEL_0) +#define MX23_PAD_SSP1_DATA0__SSP1_DATA0 MXS_IOMUX_PAD_NAKED(2, 2, PAD_MUXSEL_0) +#define MX23_PAD_SSP1_DATA1__SSP1_DATA1 MXS_IOMUX_PAD_NAKED(2, 3, PAD_MUXSEL_0) +#define MX23_PAD_SSP1_DATA2__SSP1_DATA2 MXS_IOMUX_PAD_NAKED(2, 4, PAD_MUXSEL_0) +#define MX23_PAD_SSP1_DATA3__SSP1_DATA3 MXS_IOMUX_PAD_NAKED(2, 5, PAD_MUXSEL_0) +#define MX23_PAD_SSP1_SCK__SSP1_SCK MXS_IOMUX_PAD_NAKED(2, 6, PAD_MUXSEL_0) +#define MX23_PAD_ROTARYA__ROTARYA MXS_IOMUX_PAD_NAKED(2, 7, PAD_MUXSEL_0) +#define MX23_PAD_ROTARYB__ROTARYB MXS_IOMUX_PAD_NAKED(2, 8, PAD_MUXSEL_0) +#define MX23_PAD_EMI_A00__EMI_A00 MXS_IOMUX_PAD_NAKED(2, 9, PAD_MUXSEL_0) +#define MX23_PAD_EMI_A01__EMI_A01 MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_0) +#define MX23_PAD_EMI_A02__EMI_A02 MXS_IOMUX_PAD_NAKED(2, 11, PAD_MUXSEL_0) +#define MX23_PAD_EMI_A03__EMI_A03 MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_0) +#define MX23_PAD_EMI_A04__EMI_A04 MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_0) +#define MX23_PAD_EMI_A05__EMI_A05 MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_0) +#define MX23_PAD_EMI_A06__EMI_A06 MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_0) +#define MX23_PAD_EMI_A07__EMI_A07 MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_0) +#define MX23_PAD_EMI_A08__EMI_A08 MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_0) +#define MX23_PAD_EMI_A09__EMI_A09 MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_0) +#define MX23_PAD_EMI_A10__EMI_A10 MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_0) +#define MX23_PAD_EMI_A11__EMI_A11 MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_0) +#define MX23_PAD_EMI_A12__EMI_A12 MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_0) +#define MX23_PAD_EMI_BA0__EMI_BA0 MXS_IOMUX_PAD_NAKED(2, 22, PAD_MUXSEL_0) +#define MX23_PAD_EMI_BA1__EMI_BA1 MXS_IOMUX_PAD_NAKED(2, 23, PAD_MUXSEL_0) +#define MX23_PAD_EMI_CASN__EMI_CASN MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_0) +#define MX23_PAD_EMI_CE0N__EMI_CE0N MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_0) +#define MX23_PAD_EMI_CE1N__EMI_CE1N MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_0) +#define MX23_PAD_GPMI_CE1N__GPMI_CE1N MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_0) +#define MX23_PAD_GPMI_CE0N__GPMI_CE0N MXS_IOMUX_PAD_NAKED(2, 28, PAD_MUXSEL_0) +#define MX23_PAD_EMI_CKE__EMI_CKE MXS_IOMUX_PAD_NAKED(2, 29, PAD_MUXSEL_0) +#define MX23_PAD_EMI_RASN__EMI_RASN MXS_IOMUX_PAD_NAKED(2, 30, PAD_MUXSEL_0) +#define MX23_PAD_EMI_WEN__EMI_WEN MXS_IOMUX_PAD_NAKED(2, 31, PAD_MUXSEL_0) + +#define MX23_PAD_EMI_D00__EMI_D00 MXS_IOMUX_PAD_NAKED(3, 0, PAD_MUXSEL_0) +#define MX23_PAD_EMI_D01__EMI_D01 MXS_IOMUX_PAD_NAKED(3, 1, PAD_MUXSEL_0) +#define MX23_PAD_EMI_D02__EMI_D02 MXS_IOMUX_PAD_NAKED(3, 2, PAD_MUXSEL_0) +#define MX23_PAD_EMI_D03__EMI_D03 MXS_IOMUX_PAD_NAKED(3, 3, PAD_MUXSEL_0) +#define MX23_PAD_EMI_D04__EMI_D04 MXS_IOMUX_PAD_NAKED(3, 4, PAD_MUXSEL_0) +#define MX23_PAD_EMI_D05__EMI_D05 MXS_IOMUX_PAD_NAKED(3, 5, PAD_MUXSEL_0) +#define MX23_PAD_EMI_D06__EMI_D06 MXS_IOMUX_PAD_NAKED(3, 6, PAD_MUXSEL_0) +#define MX23_PAD_EMI_D07__EMI_D07 MXS_IOMUX_PAD_NAKED(3, 7, PAD_MUXSEL_0) +#define MX23_PAD_EMI_D08__EMI_D08 MXS_IOMUX_PAD_NAKED(3, 8, PAD_MUXSEL_0) +#define MX23_PAD_EMI_D09__EMI_D09 MXS_IOMUX_PAD_NAKED(3, 9, PAD_MUXSEL_0) +#define MX23_PAD_EMI_D10__EMI_D10 MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_0) +#define MX23_PAD_EMI_D11__EMI_D11 MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_0) +#define MX23_PAD_EMI_D12__EMI_D12 MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_0) +#define MX23_PAD_EMI_D13__EMI_D13 MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_0) +#define MX23_PAD_EMI_D14__EMI_D14 MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_0) +#define MX23_PAD_EMI_D15__EMI_D15 MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_0) +#define MX23_PAD_EMI_DQM0__EMI_DQM0 MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_0) +#define MX23_PAD_EMI_DQM1__EMI_DQM1 MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_0) +#define MX23_PAD_EMI_DQS0__EMI_DQS0 MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_0) +#define MX23_PAD_EMI_DQS1__EMI_DQS1 MXS_IOMUX_PAD_NAKED(3, 19, PAD_MUXSEL_0) +#define MX23_PAD_EMI_CLK__EMI_CLK MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_0) +#define MX23_PAD_EMI_CLKN__EMI_CLKN MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_0) + +/* MUXSEL_1 */ +#define MX23_PAD_GPMI_D00__LCD_D8 MXS_IOMUX_PAD_NAKED(0, 0, PAD_MUXSEL_1) +#define MX23_PAD_GPMI_D01__LCD_D9 MXS_IOMUX_PAD_NAKED(0, 1, PAD_MUXSEL_1) +#define MX23_PAD_GPMI_D02__LCD_D10 MXS_IOMUX_PAD_NAKED(0, 2, PAD_MUXSEL_1) +#define MX23_PAD_GPMI_D03__LCD_D11 MXS_IOMUX_PAD_NAKED(0, 3, PAD_MUXSEL_1) +#define MX23_PAD_GPMI_D04__LCD_D12 MXS_IOMUX_PAD_NAKED(0, 4, PAD_MUXSEL_1) +#define MX23_PAD_GPMI_D05__LCD_D13 MXS_IOMUX_PAD_NAKED(0, 5, PAD_MUXSEL_1) +#define MX23_PAD_GPMI_D06__LCD_D14 MXS_IOMUX_PAD_NAKED(0, 6, PAD_MUXSEL_1) +#define MX23_PAD_GPMI_D07__LCD_D15 MXS_IOMUX_PAD_NAKED(0, 7, PAD_MUXSEL_1) +#define MX23_PAD_GPMI_D08__LCD_D18 MXS_IOMUX_PAD_NAKED(0, 8, PAD_MUXSEL_1) +#define MX23_PAD_GPMI_D09__LCD_D19 MXS_IOMUX_PAD_NAKED(0, 9, PAD_MUXSEL_1) +#define MX23_PAD_GPMI_D10__LCD_D20 MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_1) +#define MX23_PAD_GPMI_D11__LCD_D21 MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_1) +#define MX23_PAD_GPMI_D12__LCD_D22 MXS_IOMUX_PAD_NAKED(0, 12, PAD_MUXSEL_1) +#define MX23_PAD_GPMI_D13__LCD_D23 MXS_IOMUX_PAD_NAKED(0, 13, PAD_MUXSEL_1) +#define MX23_PAD_GPMI_D14__AUART2_RX MXS_IOMUX_PAD_NAKED(0, 14, PAD_MUXSEL_1) +#define MX23_PAD_GPMI_D15__AUART2_TX MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_1) +#define MX23_PAD_GPMI_CLE__LCD_D16 MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_1) +#define MX23_PAD_GPMI_ALE__LCD_D17 MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_1) +#define MX23_PAD_GPMI_CE2N__ATA_A2 MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_1) +#define MX23_PAD_AUART1_RTS__IR_CLK MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_1) +#define MX23_PAD_AUART1_RX__IR_RX MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_1) +#define MX23_PAD_AUART1_TX__IR_TX MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_1) +#define MX23_PAD_I2C_SCL__GPMI_RDY2 MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_1) +#define MX23_PAD_I2C_SDA__GPMI_CE2N MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_1) + +#define MX23_PAD_LCD_D00__ETM_DA8 MXS_IOMUX_PAD_NAKED(1, 0, PAD_MUXSEL_1) +#define MX23_PAD_LCD_D01__ETM_DA9 MXS_IOMUX_PAD_NAKED(1, 1, PAD_MUXSEL_1) +#define MX23_PAD_LCD_D02__ETM_DA10 MXS_IOMUX_PAD_NAKED(1, 2, PAD_MUXSEL_1) +#define MX23_PAD_LCD_D03__ETM_DA11 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_1) +#define MX23_PAD_LCD_D04__ETM_DA12 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_1) +#define MX23_PAD_LCD_D05__ETM_DA13 MXS_IOMUX_PAD_NAKED(1, 5, PAD_MUXSEL_1) +#define MX23_PAD_LCD_D06__ETM_DA14 MXS_IOMUX_PAD_NAKED(1, 6, PAD_MUXSEL_1) +#define MX23_PAD_LCD_D07__ETM_DA15 MXS_IOMUX_PAD_NAKED(1, 7, PAD_MUXSEL_1) +#define MX23_PAD_LCD_D08__ETM_DA0 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_1) +#define MX23_PAD_LCD_D09__ETM_DA1 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_1) +#define MX23_PAD_LCD_D10__ETM_DA2 MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_1) +#define MX23_PAD_LCD_D11__ETM_DA3 MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_1) +#define MX23_PAD_LCD_D12__ETM_DA4 MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_1) +#define MX23_PAD_LCD_D13__ETM_DA5 MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_1) +#define MX23_PAD_LCD_D14__ETM_DA6 MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_1) +#define MX23_PAD_LCD_D15__ETM_DA7 MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_1) +#define MX23_PAD_LCD_RESET__ETM_TCTL MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_1) +#define MX23_PAD_LCD_RS__ETM_TCLK MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_1) +#define MX23_PAD_LCD_DOTCK__GPMI_RDY3 MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_1) +#define MX23_PAD_LCD_ENABLE__I2C_SCL MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_1) +#define MX23_PAD_LCD_HSYNC__I2C_SDA MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_1) +#define MX23_PAD_LCD_VSYNC__LCD_BUSY MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_1) +#define MX23_PAD_PWM0__ROTARYA MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_1) +#define MX23_PAD_PWM1__ROTARYB MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_1) +#define MX23_PAD_PWM2__GPMI_RDY3 MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_1) +#define MX23_PAD_PWM3__ETM_TCTL MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_1) +#define MX23_PAD_PWM4__ETM_TCLK MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_1) + +#define MX23_PAD_SSP1_DETECT__GPMI_CE3N MXS_IOMUX_PAD_NAKED(2, 1, PAD_MUXSEL_1) +#define MX23_PAD_SSP1_DATA1__I2C_SCL MXS_IOMUX_PAD_NAKED(2, 3, PAD_MUXSEL_1) +#define MX23_PAD_SSP1_DATA2__I2C_SDA MXS_IOMUX_PAD_NAKED(2, 4, PAD_MUXSEL_1) +#define MX23_PAD_ROTARYA__AUART2_RTS MXS_IOMUX_PAD_NAKED(2, 7, PAD_MUXSEL_1) +#define MX23_PAD_ROTARYB__AUART2_CTS MXS_IOMUX_PAD_NAKED(2, 8, PAD_MUXSEL_1) + +/* MUXSEL_2 */ +#define MX23_PAD_GPMI_D00__SSP2_DATA0 MXS_IOMUX_PAD_NAKED(0, 0, PAD_MUXSEL_2) +#define MX23_PAD_GPMI_D01__SSP2_DATA1 MXS_IOMUX_PAD_NAKED(0, 1, PAD_MUXSEL_2) +#define MX23_PAD_GPMI_D02__SSP2_DATA2 MXS_IOMUX_PAD_NAKED(0, 2, PAD_MUXSEL_2) +#define MX23_PAD_GPMI_D03__SSP2_DATA3 MXS_IOMUX_PAD_NAKED(0, 3, PAD_MUXSEL_2) +#define MX23_PAD_GPMI_D04__SSP2_DATA4 MXS_IOMUX_PAD_NAKED(0, 4, PAD_MUXSEL_2) +#define MX23_PAD_GPMI_D05__SSP2_DATA5 MXS_IOMUX_PAD_NAKED(0, 5, PAD_MUXSEL_2) +#define MX23_PAD_GPMI_D06__SSP2_DATA6 MXS_IOMUX_PAD_NAKED(0, 6, PAD_MUXSEL_2) +#define MX23_PAD_GPMI_D07__SSP2_DATA7 MXS_IOMUX_PAD_NAKED(0, 7, PAD_MUXSEL_2) +#define MX23_PAD_GPMI_D08__SSP1_DATA4 MXS_IOMUX_PAD_NAKED(0, 8, PAD_MUXSEL_2) +#define MX23_PAD_GPMI_D09__SSP1_DATA5 MXS_IOMUX_PAD_NAKED(0, 9, PAD_MUXSEL_2) +#define MX23_PAD_GPMI_D10__SSP1_DATA6 MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_2) +#define MX23_PAD_GPMI_D11__SSP1_DATA7 MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_2) +#define MX23_PAD_GPMI_D15__GPMI_CE3N MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_2) +#define MX23_PAD_GPMI_RDY0__SSP2_DETECT MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_2) +#define MX23_PAD_GPMI_RDY1__SSP2_CMD MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_2) +#define MX23_PAD_GPMI_WRN__SSP2_SCK MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_2) +#define MX23_PAD_AUART1_CTS__SSP1_DATA4 MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_2) +#define MX23_PAD_AUART1_RTS__SSP1_DATA5 MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_2) +#define MX23_PAD_AUART1_RX__SSP1_DATA6 MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_2) +#define MX23_PAD_AUART1_TX__SSP1_DATA7 MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_2) +#define MX23_PAD_I2C_SCL__AUART1_TX MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_2) +#define MX23_PAD_I2C_SDA__AUART1_RX MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_2) + +#define MX23_PAD_LCD_D08__SAIF2_SDATA0 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_2) +#define MX23_PAD_LCD_D09__SAIF1_SDATA0 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_2) +#define MX23_PAD_LCD_D10__SAIF_MCLK_BITCLK MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_2) +#define MX23_PAD_LCD_D11__SAIF_LRCLK MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_2) +#define MX23_PAD_LCD_D12__SAIF2_SDATA1 MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_2) +#define MX23_PAD_LCD_D13__SAIF2_SDATA2 MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_2) +#define MX23_PAD_LCD_D14__SAIF1_SDATA2 MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_2) +#define MX23_PAD_LCD_D15__SAIF1_SDATA1 MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_2) +#define MX23_PAD_LCD_D16__SAIF_ALT_BITCLK MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_2) +#define MX23_PAD_LCD_RESET__GPMI_CE3N MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_2) +#define MX23_PAD_PWM0__DUART_RX MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_2) +#define MX23_PAD_PWM1__DUART_TX MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_2) +#define MX23_PAD_PWM3__AUART1_CTS MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_2) +#define MX23_PAD_PWM4__AUART1_RTS MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_2) + +#define MX23_PAD_SSP1_CMD__JTAG_TDO MXS_IOMUX_PAD_NAKED(2, 0, PAD_MUXSEL_2) +#define MX23_PAD_SSP1_DETECT__USB_OTG_ID MXS_IOMUX_PAD_NAKED(2, 1, PAD_MUXSEL_2) +#define MX23_PAD_SSP1_DATA0__JTAG_TDI MXS_IOMUX_PAD_NAKED(2, 2, PAD_MUXSEL_2) +#define MX23_PAD_SSP1_DATA1__JTAG_TCLK MXS_IOMUX_PAD_NAKED(2, 3, PAD_MUXSEL_2) +#define MX23_PAD_SSP1_DATA2__JTAG_RTCK MXS_IOMUX_PAD_NAKED(2, 4, PAD_MUXSEL_2) +#define MX23_PAD_SSP1_DATA3__JTAG_TMS MXS_IOMUX_PAD_NAKED(2, 5, PAD_MUXSEL_2) +#define MX23_PAD_SSP1_SCK__JTAG_TRST MXS_IOMUX_PAD_NAKED(2, 6, PAD_MUXSEL_2) +#define MX23_PAD_ROTARYA__SPDIF MXS_IOMUX_PAD_NAKED(2, 7, PAD_MUXSEL_2) +#define MX23_PAD_ROTARYB__GPMI_CE3N MXS_IOMUX_PAD_NAKED(2, 8, PAD_MUXSEL_2) + +/* MUXSEL_GPIO */ +#define MX23_PAD_GPMI_D00__GPO_0_0 MXS_IOMUX_PAD_NAKED(0, 0, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_D01__GPO_0_1 MXS_IOMUX_PAD_NAKED(0, 1, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_D02__GPO_0_2 MXS_IOMUX_PAD_NAKED(0, 2, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_D03__GPO_0_3 MXS_IOMUX_PAD_NAKED(0, 3, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_D04__GPO_0_4 MXS_IOMUX_PAD_NAKED(0, 4, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_D05__GPO_0_5 MXS_IOMUX_PAD_NAKED(0, 5, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_D06__GPO_0_6 MXS_IOMUX_PAD_NAKED(0, 6, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_D07__GPO_0_7 MXS_IOMUX_PAD_NAKED(0, 7, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_D08__GPO_0_8 MXS_IOMUX_PAD_NAKED(0, 8, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_D09__GPO_0_9 MXS_IOMUX_PAD_NAKED(0, 9, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_D10__GPO_0_10 MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_D11__GPO_0_11 MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_D12__GPO_0_12 MXS_IOMUX_PAD_NAKED(0, 12, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_D13__GPO_0_13 MXS_IOMUX_PAD_NAKED(0, 13, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_D14__GPO_0_14 MXS_IOMUX_PAD_NAKED(0, 14, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_D15__GPO_0_15 MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_CLE__GPO_0_16 MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_ALE__GPO_0_17 MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_CE2N__GPO_0_18 MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_RDY0__GPO_0_19 MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_RDY1__GPO_0_20 MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_RDY2__GPO_0_21 MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_RDY3__GPO_0_22 MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_WPN__GPO_0_23 MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_WRN__GPO_0_24 MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_RDN__GPO_0_25 MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_GPIO) +#define MX23_PAD_AUART1_CTS__GPO_0_26 MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_GPIO) +#define MX23_PAD_AUART1_RTS__GPO_0_27 MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_GPIO) +#define MX23_PAD_AUART1_RX__GPO_0_28 MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_GPIO) +#define MX23_PAD_AUART1_TX__GPO_0_29 MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_GPIO) +#define MX23_PAD_I2C_SCL__GPO_0_30 MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_GPIO) +#define MX23_PAD_I2C_SDA__GPO_0_31 MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_GPIO) + +#define MX23_PAD_LCD_D00__GPO_1_0 MXS_IOMUX_PAD_NAKED(1, 0, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D01__GPO_1_1 MXS_IOMUX_PAD_NAKED(1, 1, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D02__GPO_1_2 MXS_IOMUX_PAD_NAKED(1, 2, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D03__GPO_1_3 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D04__GPO_1_4 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D05__GPO_1_5 MXS_IOMUX_PAD_NAKED(1, 5, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D06__GPO_1_6 MXS_IOMUX_PAD_NAKED(1, 6, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D07__GPO_1_7 MXS_IOMUX_PAD_NAKED(1, 7, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D08__GPO_1_8 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D09__GPO_1_9 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D10__GPO_1_10 MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D11__GPO_1_11 MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D12__GPO_1_12 MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D13__GPO_1_13 MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D14__GPO_1_14 MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D15__GPO_1_15 MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D16__GPO_1_16 MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_D17__GPO_1_17 MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_RESET__GPO_1_18 MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_RS__GPO_1_19 MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_WR__GPO_1_20 MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_CS__GPO_1_21 MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_DOTCK__GPO_1_22 MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_ENABLE__GPO_1_23 MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_HSYNC__GPO_1_24 MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_GPIO) +#define MX23_PAD_LCD_VSYNC__GPO_1_25 MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_GPIO) +#define MX23_PAD_PWM0__GPO_1_26 MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_GPIO) +#define MX23_PAD_PWM1__GPO_1_27 MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_GPIO) +#define MX23_PAD_PWM2__GPO_1_28 MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_GPIO) +#define MX23_PAD_PWM3__GPO_1_29 MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_GPIO) +#define MX23_PAD_PWM4__GPO_1_30 MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_GPIO) + +#define MX23_PAD_SSP1_CMD__GPO_2_0 MXS_IOMUX_PAD_NAKED(2, 0, PAD_MUXSEL_GPIO) +#define MX23_PAD_SSP1_DETECT__GPO_2_1 MXS_IOMUX_PAD_NAKED(2, 1, PAD_MUXSEL_GPIO) +#define MX23_PAD_SSP1_DATA0__GPO_2_2 MXS_IOMUX_PAD_NAKED(2, 2, PAD_MUXSEL_GPIO) +#define MX23_PAD_SSP1_DATA1__GPO_2_3 MXS_IOMUX_PAD_NAKED(2, 3, PAD_MUXSEL_GPIO) +#define MX23_PAD_SSP1_DATA2__GPO_2_4 MXS_IOMUX_PAD_NAKED(2, 4, PAD_MUXSEL_GPIO) +#define MX23_PAD_SSP1_DATA3__GPO_2_5 MXS_IOMUX_PAD_NAKED(2, 5, PAD_MUXSEL_GPIO) +#define MX23_PAD_SSP1_SCK__GPO_2_6 MXS_IOMUX_PAD_NAKED(2, 6, PAD_MUXSEL_GPIO) +#define MX23_PAD_ROTARYA__GPO_2_7 MXS_IOMUX_PAD_NAKED(2, 7, PAD_MUXSEL_GPIO) +#define MX23_PAD_ROTARYB__GPO_2_8 MXS_IOMUX_PAD_NAKED(2, 8, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_A00__GPO_2_9 MXS_IOMUX_PAD_NAKED(2, 9, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_A01__GPO_2_10 MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_A02__GPO_2_11 MXS_IOMUX_PAD_NAKED(2, 11, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_A03__GPO_2_12 MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_A04__GPO_2_13 MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_A05__GPO_2_14 MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_A06__GPO_2_15 MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_A07__GPO_2_16 MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_A08__GPO_2_17 MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_A09__GPO_2_18 MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_A10__GPO_2_19 MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_A11__GPO_2_20 MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_A12__GPO_2_21 MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_BA0__GPO_2_22 MXS_IOMUX_PAD_NAKED(2, 22, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_BA1__GPO_2_23 MXS_IOMUX_PAD_NAKED(2, 23, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_CASN__GPO_2_24 MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_CE0N__GPO_2_25 MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_CE1N__GPO_2_26 MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_CE1N__GPO_2_27 MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_GPIO) +#define MX23_PAD_GPMI_CE0N__GPO_2_28 MXS_IOMUX_PAD_NAKED(2, 28, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_CKE__GPO_2_29 MXS_IOMUX_PAD_NAKED(2, 29, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_RASN__GPO_2_30 MXS_IOMUX_PAD_NAKED(2, 30, PAD_MUXSEL_GPIO) +#define MX23_PAD_EMI_WEN__GPO_2_31 MXS_IOMUX_PAD_NAKED(2, 31, PAD_MUXSEL_GPIO) + +#endif /* __MACH_IOMUX_MX23_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/iomux-mx28.h b/arch/arm/mach-mxs/include/mach/iomux-mx28.h new file mode 100644 index 0000000..f50fefd --- /dev/null +++ b/arch/arm/mach-mxs/include/mach/iomux-mx28.h @@ -0,0 +1,537 @@ +/* + * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com> + * Copyright (C) 2010 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#ifndef __MACH_IOMUX_MX28_H__ +#define __MACH_IOMUX_MX28_H__ + +#include <mach/iomux.h> + +/* + * The naming convention for the pad modes is MX28_PAD_<padname>__<padmode> + * If <padname> or <padmode> refers to a GPIO, it is named GPIO_<unit>_<num> + * See also iomux.h + * + * BANK PIN MUX + */ +/* MUXSEL_0 */ +#define MX28_PAD_GPMI_D00__GPMI_D0 MXS_IOMUX_PAD_NAKED(0, 0, PAD_MUXSEL_0) +#define MX28_PAD_GPMI_D01__GPMI_D1 MXS_IOMUX_PAD_NAKED(0, 1, PAD_MUXSEL_0) +#define MX28_PAD_GPMI_D02__GPMI_D2 MXS_IOMUX_PAD_NAKED(0, 2, PAD_MUXSEL_0) +#define MX28_PAD_GPMI_D03__GPMI_D3 MXS_IOMUX_PAD_NAKED(0, 3, PAD_MUXSEL_0) +#define MX28_PAD_GPMI_D04__GPMI_D4 MXS_IOMUX_PAD_NAKED(0, 4, PAD_MUXSEL_0) +#define MX28_PAD_GPMI_D05__GPMI_D5 MXS_IOMUX_PAD_NAKED(0, 5, PAD_MUXSEL_0) +#define MX28_PAD_GPMI_D06__GPMI_D6 MXS_IOMUX_PAD_NAKED(0, 6, PAD_MUXSEL_0) +#define MX28_PAD_GPMI_D07__GPMI_D7 MXS_IOMUX_PAD_NAKED(0, 7, PAD_MUXSEL_0) +#define MX28_PAD_GPMI_CE0N__GPMI_CE0N MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_0) +#define MX28_PAD_GPMI_CE1N__GPMI_CE1N MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_0) +#define MX28_PAD_GPMI_CE2N__GPMI_CE2N MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_0) +#define MX28_PAD_GPMI_CE3N__GPMI_CE3N MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_0) +#define MX28_PAD_GPMI_RDY0__GPMI_READY0 MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_0) +#define MX28_PAD_GPMI_RDY1__GPMI_READY1 MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_0) +#define MX28_PAD_GPMI_RDY2__GPMI_READY2 MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_0) +#define MX28_PAD_GPMI_RDY3__GPMI_READY3 MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_0) +#define MX28_PAD_GPMI_RDN__GPMI_RDN MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_0) +#define MX28_PAD_GPMI_WRN__GPMI_WRN MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_0) +#define MX28_PAD_GPMI_ALE__GPMI_ALE MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_0) +#define MX28_PAD_GPMI_CLE__GPMI_CLE MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_0) +#define MX28_PAD_GPMI_RESETN__GPMI_RESETN MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_0) + +#define MX28_PAD_LCD_D00__LCD_D0 MXS_IOMUX_PAD_NAKED(1, 0, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D01__LCD_D1 MXS_IOMUX_PAD_NAKED(1, 1, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D02__LCD_D2 MXS_IOMUX_PAD_NAKED(1, 2, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D03__LCD_D3 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D04__LCD_D4 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D05__LCD_D5 MXS_IOMUX_PAD_NAKED(1, 5, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D06__LCD_D6 MXS_IOMUX_PAD_NAKED(1, 6, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D07__LCD_D7 MXS_IOMUX_PAD_NAKED(1, 7, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D08__LCD_D8 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D09__LCD_D9 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D10__LCD_D10 MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D11__LCD_D11 MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D12__LCD_D12 MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D13__LCD_D13 MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D14__LCD_D14 MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D15__LCD_D15 MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D16__LCD_D16 MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D17__LCD_D17 MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D18__LCD_D18 MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D19__LCD_D19 MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D20__LCD_D20 MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D21__LCD_D21 MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D22__LCD_D22 MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_0) +#define MX28_PAD_LCD_D23__LCD_D23 MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_0) +#define MX28_PAD_LCD_RD_E__LCD_RD_E MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_0) +#define MX28_PAD_LCD_WR_RWN__LCD_WR_RWN MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_0) +#define MX28_PAD_LCD_RS__LCD_RS MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_0) +#define MX28_PAD_LCD_CS__LCD_CS MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_0) +#define MX28_PAD_LCD_VSYNC__LCD_VSYNC MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_0) +#define MX28_PAD_LCD_HSYNC__LCD_HSYNC MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_0) +#define MX28_PAD_LCD_DOTCLK__LCD_DOTCLK MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_0) +#define MX28_PAD_LCD_ENABLE__LCD_ENABLE MXS_IOMUX_PAD_NAKED(1, 31, PAD_MUXSEL_0) + +#define MX28_PAD_SSP0_DATA0__SSP0_D0 MXS_IOMUX_PAD_NAKED(2, 0, PAD_MUXSEL_0) +#define MX28_PAD_SSP0_DATA1__SSP0_D1 MXS_IOMUX_PAD_NAKED(2, 1, PAD_MUXSEL_0) +#define MX28_PAD_SSP0_DATA2__SSP0_D2 MXS_IOMUX_PAD_NAKED(2, 2, PAD_MUXSEL_0) +#define MX28_PAD_SSP0_DATA3__SSP0_D3 MXS_IOMUX_PAD_NAKED(2, 3, PAD_MUXSEL_0) +#define MX28_PAD_SSP0_DATA4__SSP0_D4 MXS_IOMUX_PAD_NAKED(2, 4, PAD_MUXSEL_0) +#define MX28_PAD_SSP0_DATA5__SSP0_D5 MXS_IOMUX_PAD_NAKED(2, 5, PAD_MUXSEL_0) +#define MX28_PAD_SSP0_DATA6__SSP0_D6 MXS_IOMUX_PAD_NAKED(2, 6, PAD_MUXSEL_0) +#define MX28_PAD_SSP0_DATA7__SSP0_D7 MXS_IOMUX_PAD_NAKED(2, 7, PAD_MUXSEL_0) +#define MX28_PAD_SSP0_CMD__SSP0_CMD MXS_IOMUX_PAD_NAKED(2, 8, PAD_MUXSEL_0) +#define MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT MXS_IOMUX_PAD_NAKED(2, 9, PAD_MUXSEL_0) +#define MX28_PAD_SSP0_SCK__SSP0_SCK MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_0) +#define MX28_PAD_SSP1_SCK__SSP1_SCK MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_0) +#define MX28_PAD_SSP1_CMD__SSP1_CMD MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_0) +#define MX28_PAD_SSP1_DATA0__SSP1_D0 MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_0) +#define MX28_PAD_SSP1_DATA3__SSP1_D3 MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_0) +#define MX28_PAD_SSP2_SCK__SSP2_SCK MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_0) +#define MX28_PAD_SSP2_MOSI__SSP2_CMD MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_0) +#define MX28_PAD_SSP2_MISO__SSP2_D0 MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_0) +#define MX28_PAD_SSP2_SS0__SSP2_D3 MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_0) +#define MX28_PAD_SSP2_SS1__SSP2_D4 MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_0) +#define MX28_PAD_SSP2_SS2__SSP2_D5 MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_0) +#define MX28_PAD_SSP3_SCK__SSP3_SCK MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_0) +#define MX28_PAD_SSP3_MOSI__SSP3_CMD MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_0) +#define MX28_PAD_SSP3_MISO__SSP3_D0 MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_0) +#define MX28_PAD_SSP3_SS0__SSP3_D3 MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_0) + +#define MX28_PAD_AUART0_RX__AUART0_RX MXS_IOMUX_PAD_NAKED(3, 0, PAD_MUXSEL_0) +#define MX28_PAD_AUART0_TX__AUART0_TX MXS_IOMUX_PAD_NAKED(3, 1, PAD_MUXSEL_0) +#define MX28_PAD_AUART0_CTS__AUART0_CTS MXS_IOMUX_PAD_NAKED(3, 2, PAD_MUXSEL_0) +#define MX28_PAD_AUART0_RTS__AUART0_RTS MXS_IOMUX_PAD_NAKED(3, 3, PAD_MUXSEL_0) +#define MX28_PAD_AUART1_RX__AUART1_RX MXS_IOMUX_PAD_NAKED(3, 4, PAD_MUXSEL_0) +#define MX28_PAD_AUART1_TX__AUART1_TX MXS_IOMUX_PAD_NAKED(3, 5, PAD_MUXSEL_0) +#define MX28_PAD_AUART1_CTS__AUART1_CTS MXS_IOMUX_PAD_NAKED(3, 6, PAD_MUXSEL_0) +#define MX28_PAD_AUART1_RTS__AUART1_RTS MXS_IOMUX_PAD_NAKED(3, 7, PAD_MUXSEL_0) +#define MX28_PAD_AUART2_RX__AUART2_RX MXS_IOMUX_PAD_NAKED(3, 8, PAD_MUXSEL_0) +#define MX28_PAD_AUART2_TX__AUART2_TX MXS_IOMUX_PAD_NAKED(3, 9, PAD_MUXSEL_0) +#define MX28_PAD_AUART2_CTS__AUART2_CTS MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_0) +#define MX28_PAD_AUART2_RTS__AUART2_RTS MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_0) +#define MX28_PAD_AUART3_RX__AUART3_RX MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_0) +#define MX28_PAD_AUART3_TX__AUART3_TX MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_0) +#define MX28_PAD_AUART3_CTS__AUART3_CTS MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_0) +#define MX28_PAD_AUART3_RTS__AUART3_RTS MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_0) +#define MX28_PAD_PWM0__PWM_0 MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_0) +#define MX28_PAD_PWM1__PWM_1 MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_0) +#define MX28_PAD_PWM2__PWM_2 MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_0) +#define MX28_PAD_SAIF0_MCLK__SAIF0_MCLK MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_0) +#define MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_0) +#define MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_0) +#define MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_0) +#define MX28_PAD_I2C0_SCL__I2C0_SCL MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_0) +#define MX28_PAD_I2C0_SDA__I2C0_SDA MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_0) +#define MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_0) +#define MX28_PAD_SPDIF__SPDIF_TX MXS_IOMUX_PAD_NAKED(3, 27, PAD_MUXSEL_0) +#define MX28_PAD_PWM3__PWM_3 MXS_IOMUX_PAD_NAKED(3, 28, PAD_MUXSEL_0) +#define MX28_PAD_PWM4__PWM_4 MXS_IOMUX_PAD_NAKED(3, 29, PAD_MUXSEL_0) +#define MX28_PAD_LCD_RESET__LCD_RESET MXS_IOMUX_PAD_NAKED(3, 30, PAD_MUXSEL_0) + +#define MX28_PAD_ENET0_MDC__ENET0_MDC MXS_IOMUX_PAD_NAKED(4, 0, PAD_MUXSEL_0) +#define MX28_PAD_ENET0_MDIO__ENET0_MDIO MXS_IOMUX_PAD_NAKED(4, 1, PAD_MUXSEL_0) +#define MX28_PAD_ENET0_RX_EN__ENET0_RX_EN MXS_IOMUX_PAD_NAKED(4, 2, PAD_MUXSEL_0) +#define MX28_PAD_ENET0_RXD0__ENET0_RXD0 MXS_IOMUX_PAD_NAKED(4, 3, PAD_MUXSEL_0) +#define MX28_PAD_ENET0_RXD1__ENET0_RXD1 MXS_IOMUX_PAD_NAKED(4, 4, PAD_MUXSEL_0) +#define MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK MXS_IOMUX_PAD_NAKED(4, 5, PAD_MUXSEL_0) +#define MX28_PAD_ENET0_TX_EN__ENET0_TX_EN MXS_IOMUX_PAD_NAKED(4, 6, PAD_MUXSEL_0) +#define MX28_PAD_ENET0_TXD0__ENET0_TXD0 MXS_IOMUX_PAD_NAKED(4, 7, PAD_MUXSEL_0) +#define MX28_PAD_ENET0_TXD1__ENET0_TXD1 MXS_IOMUX_PAD_NAKED(4, 8, PAD_MUXSEL_0) +#define MX28_PAD_ENET0_RXD2__ENET0_RXD2 MXS_IOMUX_PAD_NAKED(4, 9, PAD_MUXSEL_0) +#define MX28_PAD_ENET0_RXD3__ENET0_RXD3 MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_0) +#define MX28_PAD_ENET0_TXD2__ENET0_TXD2 MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_0) +#define MX28_PAD_ENET0_TXD3__ENET0_TXD3 MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_0) +#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_0) +#define MX28_PAD_ENET0_COL__ENET0_COL MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_0) +#define MX28_PAD_ENET0_CRS__ENET0_CRS MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_0) +#define MX28_PAD_ENET_CLK__CLKCTRL_ENET MXS_IOMUX_PAD_NAKED(4, 16, PAD_MUXSEL_0) +#define MX28_PAD_JTAG_RTCK__JTAG_RTCK MXS_IOMUX_PAD_NAKED(4, 20, PAD_MUXSEL_0) + +#define MX28_PAD_EMI_D00__EMI_DATA0 MXS_IOMUX_PAD_NAKED(5, 0, PAD_MUXSEL_0) +#define MX28_PAD_EMI_D01__EMI_DATA1 MXS_IOMUX_PAD_NAKED(5, 1, PAD_MUXSEL_0) +#define MX28_PAD_EMI_D02__EMI_DATA2 MXS_IOMUX_PAD_NAKED(5, 2, PAD_MUXSEL_0) +#define MX28_PAD_EMI_D03__EMI_DATA3 MXS_IOMUX_PAD_NAKED(5, 3, PAD_MUXSEL_0) +#define MX28_PAD_EMI_D04__EMI_DATA4 MXS_IOMUX_PAD_NAKED(5, 4, PAD_MUXSEL_0) +#define MX28_PAD_EMI_D05__EMI_DATA5 MXS_IOMUX_PAD_NAKED(5, 5, PAD_MUXSEL_0) +#define MX28_PAD_EMI_D06__EMI_DATA6 MXS_IOMUX_PAD_NAKED(5, 6, PAD_MUXSEL_0) +#define MX28_PAD_EMI_D07__EMI_DATA7 MXS_IOMUX_PAD_NAKED(5, 7, PAD_MUXSEL_0) +#define MX28_PAD_EMI_D08__EMI_DATA8 MXS_IOMUX_PAD_NAKED(5, 8, PAD_MUXSEL_0) +#define MX28_PAD_EMI_D09__EMI_DATA9 MXS_IOMUX_PAD_NAKED(5, 9, PAD_MUXSEL_0) +#define MX28_PAD_EMI_D10__EMI_DATA10 MXS_IOMUX_PAD_NAKED(5, 10, PAD_MUXSEL_0) +#define MX28_PAD_EMI_D11__EMI_DATA11 MXS_IOMUX_PAD_NAKED(5, 11, PAD_MUXSEL_0) +#define MX28_PAD_EMI_D12__EMI_DATA12 MXS_IOMUX_PAD_NAKED(5, 12, PAD_MUXSEL_0) +#define MX28_PAD_EMI_D13__EMI_DATA13 MXS_IOMUX_PAD_NAKED(5, 13, PAD_MUXSEL_0) +#define MX28_PAD_EMI_D14__EMI_DATA14 MXS_IOMUX_PAD_NAKED(5, 14, PAD_MUXSEL_0) +#define MX28_PAD_EMI_D15__EMI_DATA15 MXS_IOMUX_PAD_NAKED(5, 15, PAD_MUXSEL_0) +#define MX28_PAD_EMI_ODT0__EMI_ODT0 MXS_IOMUX_PAD_NAKED(5, 16, PAD_MUXSEL_0) +#define MX28_PAD_EMI_DQM0__EMI_DQM0 MXS_IOMUX_PAD_NAKED(5, 17, PAD_MUXSEL_0) +#define MX28_PAD_EMI_ODT1__EMI_ODT1 MXS_IOMUX_PAD_NAKED(5, 18, PAD_MUXSEL_0) +#define MX28_PAD_EMI_DQM1__EMI_DQM1 MXS_IOMUX_PAD_NAKED(5, 19, PAD_MUXSEL_0) +#define MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK MXS_IOMUX_PAD_NAKED(5, 20, PAD_MUXSEL_0) +#define MX28_PAD_EMI_CLK__EMI_CLK MXS_IOMUX_PAD_NAKED(5, 21, PAD_MUXSEL_0) +#define MX28_PAD_EMI_DQS0__EMI_DQS0 MXS_IOMUX_PAD_NAKED(5, 22, PAD_MUXSEL_0) +#define MX28_PAD_EMI_DQS1__EMI_DQS1 MXS_IOMUX_PAD_NAKED(5, 23, PAD_MUXSEL_0) +#define MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN MXS_IOMUX_PAD_NAKED(5, 26, PAD_MUXSEL_0) + +#define MX28_PAD_EMI_A00__EMI_ADDR0 MXS_IOMUX_PAD_NAKED(6, 0, PAD_MUXSEL_0) +#define MX28_PAD_EMI_A01__EMI_ADDR1 MXS_IOMUX_PAD_NAKED(6, 1, PAD_MUXSEL_0) +#define MX28_PAD_EMI_A02__EMI_ADDR2 MXS_IOMUX_PAD_NAKED(6, 2, PAD_MUXSEL_0) +#define MX28_PAD_EMI_A03__EMI_ADDR3 MXS_IOMUX_PAD_NAKED(6, 3, PAD_MUXSEL_0) +#define MX28_PAD_EMI_A04__EMI_ADDR4 MXS_IOMUX_PAD_NAKED(6, 4, PAD_MUXSEL_0) +#define MX28_PAD_EMI_A05__EMI_ADDR5 MXS_IOMUX_PAD_NAKED(6, 5, PAD_MUXSEL_0) +#define MX28_PAD_EMI_A06__EMI_ADDR6 MXS_IOMUX_PAD_NAKED(6, 6, PAD_MUXSEL_0) +#define MX28_PAD_EMI_A07__EMI_ADDR7 MXS_IOMUX_PAD_NAKED(6, 7, PAD_MUXSEL_0) +#define MX28_PAD_EMI_A08__EMI_ADDR8 MXS_IOMUX_PAD_NAKED(6, 8, PAD_MUXSEL_0) +#define MX28_PAD_EMI_A09__EMI_ADDR9 MXS_IOMUX_PAD_NAKED(6, 9, PAD_MUXSEL_0) +#define MX28_PAD_EMI_A10__EMI_ADDR10 MXS_IOMUX_PAD_NAKED(6, 10, PAD_MUXSEL_0) +#define MX28_PAD_EMI_A11__EMI_ADDR11 MXS_IOMUX_PAD_NAKED(6, 11, PAD_MUXSEL_0) +#define MX28_PAD_EMI_A12__EMI_ADDR12 MXS_IOMUX_PAD_NAKED(6, 12, PAD_MUXSEL_0) +#define MX28_PAD_EMI_A13__EMI_ADDR13 MXS_IOMUX_PAD_NAKED(6, 13, PAD_MUXSEL_0) +#define MX28_PAD_EMI_A14__EMI_ADDR14 MXS_IOMUX_PAD_NAKED(6, 14, PAD_MUXSEL_0) +#define MX28_PAD_EMI_BA0__EMI_BA0 MXS_IOMUX_PAD_NAKED(6, 16, PAD_MUXSEL_0) +#define MX28_PAD_EMI_BA1__EMI_BA1 MXS_IOMUX_PAD_NAKED(6, 17, PAD_MUXSEL_0) +#define MX28_PAD_EMI_BA2__EMI_BA2 MXS_IOMUX_PAD_NAKED(6, 18, PAD_MUXSEL_0) +#define MX28_PAD_EMI_CASN__EMI_CASN MXS_IOMUX_PAD_NAKED(6, 19, PAD_MUXSEL_0) +#define MX28_PAD_EMI_RASN__EMI_RASN MXS_IOMUX_PAD_NAKED(6, 20, PAD_MUXSEL_0) +#define MX28_PAD_EMI_WEN__EMI_WEN MXS_IOMUX_PAD_NAKED(6, 21, PAD_MUXSEL_0) +#define MX28_PAD_EMI_CE0N__EMI_CE0N MXS_IOMUX_PAD_NAKED(6, 22, PAD_MUXSEL_0) +#define MX28_PAD_EMI_CE1N__EMI_CE1N MXS_IOMUX_PAD_NAKED(6, 23, PAD_MUXSEL_0) +#define MX28_PAD_EMI_CKE__EMI_CKE MXS_IOMUX_PAD_NAKED(6, 24, PAD_MUXSEL_0) + +/* MUXSEL_1 */ +#define MX28_PAD_GPMI_D00__SSP1_D0 MXS_IOMUX_PAD_NAKED(0, 0, PAD_MUXSEL_1) +#define MX28_PAD_GPMI_D01__SSP1_D1 MXS_IOMUX_PAD_NAKED(0, 1, PAD_MUXSEL_1) +#define MX28_PAD_GPMI_D02__SSP1_D2 MXS_IOMUX_PAD_NAKED(0, 2, PAD_MUXSEL_1) +#define MX28_PAD_GPMI_D03__SSP1_D3 MXS_IOMUX_PAD_NAKED(0, 3, PAD_MUXSEL_1) +#define MX28_PAD_GPMI_D04__SSP1_D4 MXS_IOMUX_PAD_NAKED(0, 4, PAD_MUXSEL_1) +#define MX28_PAD_GPMI_D05__SSP1_D5 MXS_IOMUX_PAD_NAKED(0, 5, PAD_MUXSEL_1) +#define MX28_PAD_GPMI_D06__SSP1_D6 MXS_IOMUX_PAD_NAKED(0, 6, PAD_MUXSEL_1) +#define MX28_PAD_GPMI_D07__SSP1_D7 MXS_IOMUX_PAD_NAKED(0, 7, PAD_MUXSEL_1) +#define MX28_PAD_GPMI_CE0N__SSP3_D0 MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_1) +#define MX28_PAD_GPMI_CE1N__SSP3_D3 MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_1) +#define MX28_PAD_GPMI_CE2N__CAN1_TX MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_1) +#define MX28_PAD_GPMI_CE3N__CAN1_RX MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_1) +#define MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_1) +#define MX28_PAD_GPMI_RDY1__SSP1_CMD MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_1) +#define MX28_PAD_GPMI_RDY2__CAN0_TX MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_1) +#define MX28_PAD_GPMI_RDY3__CAN0_RX MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_1) +#define MX28_PAD_GPMI_RDN__SSP3_SCK MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_1) +#define MX28_PAD_GPMI_WRN__SSP1_SCK MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_1) +#define MX28_PAD_GPMI_ALE__SSP3_D1 MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_1) +#define MX28_PAD_GPMI_CLE__SSP3_D2 MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_1) +#define MX28_PAD_GPMI_RESETN__SSP3_CMD MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_1) + +#define MX28_PAD_LCD_D03__ETM_DA8 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_1) +#define MX28_PAD_LCD_D04__ETM_DA9 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_1) +#define MX28_PAD_LCD_D08__ETM_DA3 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_1) +#define MX28_PAD_LCD_D09__ETM_DA4 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_1) +#define MX28_PAD_LCD_D20__ENET1_1588_EVENT2_OUT MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_1) +#define MX28_PAD_LCD_D21__ENET1_1588_EVENT2_IN MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_1) +#define MX28_PAD_LCD_D22__ENET1_1588_EVENT3_OUT MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_1) +#define MX28_PAD_LCD_D23__ENET1_1588_EVENT3_IN MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_1) +#define MX28_PAD_LCD_RD_E__LCD_VSYNC MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_1) +#define MX28_PAD_LCD_WR_RWN__LCD_HSYNC MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_1) +#define MX28_PAD_LCD_RS__LCD_DOTCLK MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_1) +#define MX28_PAD_LCD_CS__LCD_ENABLE MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_1) +#define MX28_PAD_LCD_VSYNC__SAIF1_SDATA0 MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_1) +#define MX28_PAD_LCD_HSYNC__SAIF1_SDATA1 MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_1) +#define MX28_PAD_LCD_DOTCLK__SAIF1_MCLK MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_1) + +#define MX28_PAD_SSP0_DATA4__SSP2_D0 MXS_IOMUX_PAD_NAKED(2, 4, PAD_MUXSEL_1) +#define MX28_PAD_SSP0_DATA5__SSP2_D3 MXS_IOMUX_PAD_NAKED(2, 5, PAD_MUXSEL_1) +#define MX28_PAD_SSP0_DATA6__SSP2_CMD MXS_IOMUX_PAD_NAKED(2, 6, PAD_MUXSEL_1) +#define MX28_PAD_SSP0_DATA7__SSP2_SCK MXS_IOMUX_PAD_NAKED(2, 7, PAD_MUXSEL_1) +#define MX28_PAD_SSP1_SCK__SSP2_D1 MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_1) +#define MX28_PAD_SSP1_CMD__SSP2_D2 MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_1) +#define MX28_PAD_SSP1_DATA0__SSP2_D6 MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_1) +#define MX28_PAD_SSP1_DATA3__SSP2_D7 MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_1) +#define MX28_PAD_SSP2_SCK__AUART2_RX MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_1) +#define MX28_PAD_SSP2_MOSI__AUART2_TX MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_1) +#define MX28_PAD_SSP2_MISO__AUART3_RX MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_1) +#define MX28_PAD_SSP2_SS0__AUART3_TX MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_1) +#define MX28_PAD_SSP2_SS1__SSP2_D1 MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_1) +#define MX28_PAD_SSP2_SS2__SSP2_D2 MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_1) +#define MX28_PAD_SSP3_SCK__AUART4_TX MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_1) +#define MX28_PAD_SSP3_MOSI__AUART4_RX MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_1) +#define MX28_PAD_SSP3_MISO__AUART4_RTS MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_1) +#define MX28_PAD_SSP3_SS0__AUART4_CTS MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_1) + +#define MX28_PAD_AUART0_RX__I2C0_SCL MXS_IOMUX_PAD_NAKED(3, 0, PAD_MUXSEL_1) +#define MX28_PAD_AUART0_TX__I2C0_SDA MXS_IOMUX_PAD_NAKED(3, 1, PAD_MUXSEL_1) +#define MX28_PAD_AUART0_CTS__AUART4_RX MXS_IOMUX_PAD_NAKED(3, 2, PAD_MUXSEL_1) +#define MX28_PAD_AUART0_RTS__AUART4_TX MXS_IOMUX_PAD_NAKED(3, 3, PAD_MUXSEL_1) +#define MX28_PAD_AUART1_RX__SSP2_CARD_DETECT MXS_IOMUX_PAD_NAKED(3, 4, PAD_MUXSEL_1) +#define MX28_PAD_AUART1_TX__SSP3_CARD_DETECT MXS_IOMUX_PAD_NAKED(3, 5, PAD_MUXSEL_1) +#define MX28_PAD_AUART1_CTS__USB0_OVERCURRENT MXS_IOMUX_PAD_NAKED(3, 6, PAD_MUXSEL_1) +#define MX28_PAD_AUART1_RTS__USB0_ID MXS_IOMUX_PAD_NAKED(3, 7, PAD_MUXSEL_1) +#define MX28_PAD_AUART2_RX__SSP3_D1 MXS_IOMUX_PAD_NAKED(3, 8, PAD_MUXSEL_1) +#define MX28_PAD_AUART2_TX__SSP3_D2 MXS_IOMUX_PAD_NAKED(3, 9, PAD_MUXSEL_1) +#define MX28_PAD_AUART2_CTS__I2C1_SCL MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_1) +#define MX28_PAD_AUART2_RTS__I2C1_SDA MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_1) +#define MX28_PAD_AUART3_RX__CAN0_TX MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_1) +#define MX28_PAD_AUART3_TX__CAN0_RX MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_1) +#define MX28_PAD_AUART3_CTS__CAN1_TX MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_1) +#define MX28_PAD_AUART3_RTS__CAN1_RX MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_1) +#define MX28_PAD_PWM0__I2C1_SCL MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_1) +#define MX28_PAD_PWM1__I2C1_SDA MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_1) +#define MX28_PAD_PWM2__USB0_ID MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_1) +#define MX28_PAD_SAIF0_MCLK__PWM_3 MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_1) +#define MX28_PAD_SAIF0_LRCLK__PWM_4 MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_1) +#define MX28_PAD_SAIF0_BITCLK__PWM_5 MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_1) +#define MX28_PAD_SAIF0_SDATA0__PWM_6 MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_1) +#define MX28_PAD_I2C0_SCL__TIMROT_ROTARYA MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_1) +#define MX28_PAD_I2C0_SDA__TIMROT_ROTARYB MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_1) +#define MX28_PAD_SAIF1_SDATA0__PWM_7 MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_1) +#define MX28_PAD_LCD_RESET__LCD_VSYNC MXS_IOMUX_PAD_NAKED(3, 30, PAD_MUXSEL_1) + +#define MX28_PAD_ENET0_MDC__GPMI_CE4N MXS_IOMUX_PAD_NAKED(4, 0, PAD_MUXSEL_1) +#define MX28_PAD_ENET0_MDIO__GPMI_CE5N MXS_IOMUX_PAD_NAKED(4, 1, PAD_MUXSEL_1) +#define MX28_PAD_ENET0_RX_EN__GPMI_CE6N MXS_IOMUX_PAD_NAKED(4, 2, PAD_MUXSEL_1) +#define MX28_PAD_ENET0_RXD0__GPMI_CE7N MXS_IOMUX_PAD_NAKED(4, 3, PAD_MUXSEL_1) +#define MX28_PAD_ENET0_RXD1__GPMI_READY4 MXS_IOMUX_PAD_NAKED(4, 4, PAD_MUXSEL_1) +#define MX28_PAD_ENET0_TX_CLK__HSADC_TRIGGER MXS_IOMUX_PAD_NAKED(4, 5, PAD_MUXSEL_1) +#define MX28_PAD_ENET0_TX_EN__GPMI_READY5 MXS_IOMUX_PAD_NAKED(4, 6, PAD_MUXSEL_1) +#define MX28_PAD_ENET0_TXD0__GPMI_READY6 MXS_IOMUX_PAD_NAKED(4, 7, PAD_MUXSEL_1) +#define MX28_PAD_ENET0_TXD1__GPMI_READY7 MXS_IOMUX_PAD_NAKED(4, 8, PAD_MUXSEL_1) +#define MX28_PAD_ENET0_RXD2__ENET1_RXD0 MXS_IOMUX_PAD_NAKED(4, 9, PAD_MUXSEL_1) +#define MX28_PAD_ENET0_RXD3__ENET1_RXD1 MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_1) +#define MX28_PAD_ENET0_TXD2__ENET1_TXD0 MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_1) +#define MX28_PAD_ENET0_TXD3__ENET1_TXD1 MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_1) +#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_ER MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_1) +#define MX28_PAD_ENET0_COL__ENET1_TX_EN MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_1) +#define MX28_PAD_ENET0_CRS__ENET1_RX_EN MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_1) + +/* MUXSEL_2 */ +#define MX28_PAD_GPMI_CE2N__ENET0_RX_ER MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_2) +#define MX28_PAD_GPMI_CE3N__SAIF1_MCLK MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_2) +#define MX28_PAD_GPMI_RDY0__USB0_ID MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_2) +#define MX28_PAD_GPMI_RDY2__ENET0_TX_ER MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_2) +#define MX28_PAD_GPMI_RDY3__HSADC_TRIGGER MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_2) +#define MX28_PAD_GPMI_ALE__SSP3_D4 MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_2) +#define MX28_PAD_GPMI_CLE__SSP3_D5 MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_2) + +#define MX28_PAD_LCD_D00__ETM_DA0 MXS_IOMUX_PAD_NAKED(1, 0, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D01__ETM_DA1 MXS_IOMUX_PAD_NAKED(1, 1, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D02__ETM_DA2 MXS_IOMUX_PAD_NAKED(1, 2, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D03__ETM_DA3 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D04__ETM_DA4 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D05__ETM_DA5 MXS_IOMUX_PAD_NAKED(1, 5, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D06__ETM_DA6 MXS_IOMUX_PAD_NAKED(1, 6, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D07__ETM_DA7 MXS_IOMUX_PAD_NAKED(1, 7, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D08__ETM_DA8 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D09__ETM_DA9 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D10__ETM_DA10 MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D11__ETM_DA11 MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D12__ETM_DA12 MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D13__ETM_DA13 MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D14__ETM_DA14 MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D15__ETM_DA15 MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D16__ETM_DA7 MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D17__ETM_DA6 MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D18__ETM_DA5 MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D19__ETM_DA4 MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D20__ETM_DA3 MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D21__ETM_DA2 MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D22__ETM_DA1 MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_2) +#define MX28_PAD_LCD_D23__ETM_DA0 MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_2) +#define MX28_PAD_LCD_RD_E__ETM_TCTL MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_2) +#define MX28_PAD_LCD_WR_RWN__ETM_TCLK MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_2) +#define MX28_PAD_LCD_HSYNC__ETM_TCTL MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_2) +#define MX28_PAD_LCD_DOTCLK__ETM_TCLK MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_2) + +#define MX28_PAD_SSP1_SCK__ENET0_1588_EVENT2_OUT MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_2) +#define MX28_PAD_SSP1_CMD__ENET0_1588_EVENT2_IN MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_2) +#define MX28_PAD_SSP1_DATA0__ENET0_1588_EVENT3_OUT MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_2) +#define MX28_PAD_SSP1_DATA3__ENET0_1588_EVENT3_IN MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_2) +#define MX28_PAD_SSP2_SCK__SAIF0_SDATA1 MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_2) +#define MX28_PAD_SSP2_MOSI__SAIF0_SDATA2 MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_2) +#define MX28_PAD_SSP2_MISO__SAIF1_SDATA1 MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_2) +#define MX28_PAD_SSP2_SS0__SAIF1_SDATA2 MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_2) +#define MX28_PAD_SSP2_SS1__USB1_OVERCURRENT MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_2) +#define MX28_PAD_SSP2_SS2__USB0_OVERCURRENT MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_2) +#define MX28_PAD_SSP3_SCK__ENET1_1588_EVENT0_OUT MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_2) +#define MX28_PAD_SSP3_MOSI__ENET1_1588_EVENT0_IN MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_2) +#define MX28_PAD_SSP3_MISO__ENET1_1588_EVENT1_OUT MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_2) +#define MX28_PAD_SSP3_SS0__ENET1_1588_EVENT1_IN MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_2) + +#define MX28_PAD_AUART0_RX__DUART_CTS MXS_IOMUX_PAD_NAKED(3, 0, PAD_MUXSEL_2) +#define MX28_PAD_AUART0_TX__DUART_RTS MXS_IOMUX_PAD_NAKED(3, 1, PAD_MUXSEL_2) +#define MX28_PAD_AUART0_CTS__DUART_RX MXS_IOMUX_PAD_NAKED(3, 2, PAD_MUXSEL_2) +#define MX28_PAD_AUART0_RTS__DUART_TX MXS_IOMUX_PAD_NAKED(3, 3, PAD_MUXSEL_2) +#define MX28_PAD_AUART1_RX__PWM_0 MXS_IOMUX_PAD_NAKED(3, 4, PAD_MUXSEL_2) +#define MX28_PAD_AUART1_TX__PWM_1 MXS_IOMUX_PAD_NAKED(3, 5, PAD_MUXSEL_2) +#define MX28_PAD_AUART1_CTS__TIMROT_ROTARYA MXS_IOMUX_PAD_NAKED(3, 6, PAD_MUXSEL_2) +#define MX28_PAD_AUART1_RTS__TIMROT_ROTARYB MXS_IOMUX_PAD_NAKED(3, 7, PAD_MUXSEL_2) +#define MX28_PAD_AUART2_RX__SSP3_D4 MXS_IOMUX_PAD_NAKED(3, 8, PAD_MUXSEL_2) +#define MX28_PAD_AUART2_TX__SSP3_D5 MXS_IOMUX_PAD_NAKED(3, 9, PAD_MUXSEL_2) +#define MX28_PAD_AUART2_CTS__SAIF1_BITCLK MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_2) +#define MX28_PAD_AUART2_RTS__SAIF1_LRCLK MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_2) +#define MX28_PAD_AUART3_RX__ENET0_1588_EVENT0_OUT MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_2) +#define MX28_PAD_AUART3_TX__ENET0_1588_EVENT0_IN MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_2) +#define MX28_PAD_AUART3_CTS__ENET0_1588_EVENT1_OUT MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_2) +#define MX28_PAD_AUART3_RTS__ENET0_1588_EVENT1_IN MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_2) +#define MX28_PAD_PWM0__DUART_RX MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_2) +#define MX28_PAD_PWM1__DUART_TX MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_2) +#define MX28_PAD_PWM2__USB1_OVERCURRENT MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_2) +#define MX28_PAD_SAIF0_MCLK__AUART4_CTS MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_2) +#define MX28_PAD_SAIF0_LRCLK__AUART4_RTS MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_2) +#define MX28_PAD_SAIF0_BITCLK__AUART4_RX MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_2) +#define MX28_PAD_SAIF0_SDATA0__AUART4_TX MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_2) +#define MX28_PAD_I2C0_SCL__DUART_RX MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_2) +#define MX28_PAD_I2C0_SDA__DUART_TX MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_2) +#define MX28_PAD_SAIF1_SDATA0__SAIF0_SDATA1 MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_2) +#define MX28_PAD_SPDIF__ENET1_RX_ER MXS_IOMUX_PAD_NAKED(3, 27, PAD_MUXSEL_2) + +#define MX28_PAD_ENET0_MDC__SAIF0_SDATA1 MXS_IOMUX_PAD_NAKED(4, 0, PAD_MUXSEL_2) +#define MX28_PAD_ENET0_MDIO__SAIF0_SDATA2 MXS_IOMUX_PAD_NAKED(4, 1, PAD_MUXSEL_2) +#define MX28_PAD_ENET0_RX_EN__SAIF1_SDATA1 MXS_IOMUX_PAD_NAKED(4, 2, PAD_MUXSEL_2) +#define MX28_PAD_ENET0_RXD0__SAIF1_SDATA2 MXS_IOMUX_PAD_NAKED(4, 3, PAD_MUXSEL_2) +#define MX28_PAD_ENET0_TX_CLK__ENET0_1588_EVENT2_OUT MXS_IOMUX_PAD_NAKED(4, 5, PAD_MUXSEL_2) +#define MX28_PAD_ENET0_RXD2__ENET0_1588_EVENT0_OUT MXS_IOMUX_PAD_NAKED(4, 9, PAD_MUXSEL_2) +#define MX28_PAD_ENET0_RXD3__ENET0_1588_EVENT0_IN MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_2) +#define MX28_PAD_ENET0_TXD2__ENET0_1588_EVENT1_OUT MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_2) +#define MX28_PAD_ENET0_TXD3__ENET0_1588_EVENT1_IN MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_2) +#define MX28_PAD_ENET0_RX_CLK__ENET0_1588_EVENT2_IN MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_2) +#define MX28_PAD_ENET0_COL__ENET0_1588_EVENT3_OUT MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_2) +#define MX28_PAD_ENET0_CRS__ENET0_1588_EVENT3_IN MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_2) + +/* MUXSEL_GPIO */ +#define MX28_PAD_GPMI_D00__GPIO_0_0 MXS_IOMUX_PAD_NAKED(0, 0, PAD_MUXSEL_GPIO) +#define MX28_PAD_GPMI_D01__GPIO_0_1 MXS_IOMUX_PAD_NAKED(0, 1, PAD_MUXSEL_GPIO) +#define MX28_PAD_GPMI_D02__GPIO_0_2 MXS_IOMUX_PAD_NAKED(0, 2, PAD_MUXSEL_GPIO) +#define MX28_PAD_GPMI_D03__GPIO_0_3 MXS_IOMUX_PAD_NAKED(0, 3, PAD_MUXSEL_GPIO) +#define MX28_PAD_GPMI_D04__GPIO_0_4 MXS_IOMUX_PAD_NAKED(0, 4, PAD_MUXSEL_GPIO) +#define MX28_PAD_GPMI_D05__GPIO_0_5 MXS_IOMUX_PAD_NAKED(0, 5, PAD_MUXSEL_GPIO) +#define MX28_PAD_GPMI_D06__GPIO_0_6 MXS_IOMUX_PAD_NAKED(0, 6, PAD_MUXSEL_GPIO) +#define MX28_PAD_GPMI_D07__GPIO_0_7 MXS_IOMUX_PAD_NAKED(0, 7, PAD_MUXSEL_GPIO) +#define MX28_PAD_GPMI_CE0N__GPIO_0_16 MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_GPIO) +#define MX28_PAD_GPMI_CE1N__GPIO_0_17 MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_GPIO) +#define MX28_PAD_GPMI_CE2N__GPIO_0_18 MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_GPIO) +#define MX28_PAD_GPMI_CE3N__GPIO_0_19 MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_GPIO) +#define MX28_PAD_GPMI_RDY0__GPIO_0_20 MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_GPIO) +#define MX28_PAD_GPMI_RDY1__GPIO_0_21 MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_GPIO) +#define MX28_PAD_GPMI_RDY2__GPIO_0_22 MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_GPIO) +#define MX28_PAD_GPMI_RDY3__GPIO_0_23 MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_GPIO) +#define MX28_PAD_GPMI_RDN__GPIO_0_24 MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_GPIO) +#define MX28_PAD_GPMI_WRN__GPIO_0_25 MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_GPIO) +#define MX28_PAD_GPMI_ALE__GPIO_0_26 MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_GPIO) +#define MX28_PAD_GPMI_CLE__GPIO_0_27 MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_GPIO) +#define MX28_PAD_GPMI_RESETN__GPIO_0_28 MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_GPIO) + +#define MX28_PAD_LCD_D00__GPIO_1_0 MXS_IOMUX_PAD_NAKED(1, 0, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D01__GPIO_1_1 MXS_IOMUX_PAD_NAKED(1, 1, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D02__GPIO_1_2 MXS_IOMUX_PAD_NAKED(1, 2, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D03__GPIO_1_3 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D04__GPIO_1_4 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D05__GPIO_1_5 MXS_IOMUX_PAD_NAKED(1, 5, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D06__GPIO_1_6 MXS_IOMUX_PAD_NAKED(1, 6, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D07__GPIO_1_7 MXS_IOMUX_PAD_NAKED(1, 7, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D08__GPIO_1_8 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D09__GPIO_1_9 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D10__GPIO_1_10 MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D11__GPIO_1_11 MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D12__GPIO_1_12 MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D13__GPIO_1_13 MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D14__GPIO_1_14 MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D15__GPIO_1_15 MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D16__GPIO_1_16 MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D17__GPIO_1_17 MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D18__GPIO_1_18 MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D19__GPIO_1_19 MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D20__GPIO_1_20 MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D21__GPIO_1_21 MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D22__GPIO_1_22 MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_D23__GPIO_1_23 MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_RD_E__GPIO_1_24 MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_WR_RWN__GPIO_1_25 MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_RS__GPIO_1_26 MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_CS__GPIO_1_27 MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_VSYNC__GPIO_1_28 MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_HSYNC__GPIO_1_29 MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_DOTCLK__GPIO_1_30 MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_ENABLE__GPIO_1_31 MXS_IOMUX_PAD_NAKED(1, 31, PAD_MUXSEL_GPIO) + +#define MX28_PAD_SSP0_DATA0__GPIO_2_0 MXS_IOMUX_PAD_NAKED(2, 0, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP0_DATA1__GPIO_2_1 MXS_IOMUX_PAD_NAKED(2, 1, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP0_DATA2__GPIO_2_2 MXS_IOMUX_PAD_NAKED(2, 2, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP0_DATA3__GPIO_2_3 MXS_IOMUX_PAD_NAKED(2, 3, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP0_DATA4__GPIO_2_4 MXS_IOMUX_PAD_NAKED(2, 4, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP0_DATA5__GPIO_2_5 MXS_IOMUX_PAD_NAKED(2, 5, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP0_DATA6__GPIO_2_6 MXS_IOMUX_PAD_NAKED(2, 6, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP0_DATA7__GPIO_2_7 MXS_IOMUX_PAD_NAKED(2, 7, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP0_CMD__GPIO_2_8 MXS_IOMUX_PAD_NAKED(2, 8, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP0_DETECT__GPIO_2_9 MXS_IOMUX_PAD_NAKED(2, 9, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP0_SCK__GPIO_2_10 MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP1_SCK__GPIO_2_12 MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP1_CMD__GPIO_2_13 MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP1_DATA0__GPIO_2_14 MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP1_DATA3__GPIO_2_15 MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP2_SCK__GPIO_2_16 MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP2_MOSI__GPIO_2_17 MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP2_MISO__GPIO_2_18 MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP2_SS0__GPIO_2_19 MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP2_SS1__GPIO_2_20 MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP2_SS2__GPIO_2_21 MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP3_SCK__GPIO_2_24 MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP3_MOSI__GPIO_2_25 MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP3_MISO__GPIO_2_26 MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_GPIO) +#define MX28_PAD_SSP3_SS0__GPIO_2_27 MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_GPIO) + +#define MX28_PAD_AUART0_RX__GPIO_3_0 MXS_IOMUX_PAD_NAKED(3, 0, PAD_MUXSEL_GPIO) +#define MX28_PAD_AUART0_TX__GPIO_3_1 MXS_IOMUX_PAD_NAKED(3, 1, PAD_MUXSEL_GPIO) +#define MX28_PAD_AUART0_CTS__GPIO_3_2 MXS_IOMUX_PAD_NAKED(3, 2, PAD_MUXSEL_GPIO) +#define MX28_PAD_AUART0_RTS__GPIO_3_3 MXS_IOMUX_PAD_NAKED(3, 3, PAD_MUXSEL_GPIO) +#define MX28_PAD_AUART1_RX__GPIO_3_4 MXS_IOMUX_PAD_NAKED(3, 4, PAD_MUXSEL_GPIO) +#define MX28_PAD_AUART1_TX__GPIO_3_5 MXS_IOMUX_PAD_NAKED(3, 5, PAD_MUXSEL_GPIO) +#define MX28_PAD_AUART1_CTS__GPIO_3_6 MXS_IOMUX_PAD_NAKED(3, 6, PAD_MUXSEL_GPIO) +#define MX28_PAD_AUART1_RTS__GPIO_3_7 MXS_IOMUX_PAD_NAKED(3, 7, PAD_MUXSEL_GPIO) +#define MX28_PAD_AUART2_RX__GPIO_3_8 MXS_IOMUX_PAD_NAKED(3, 8, PAD_MUXSEL_GPIO) +#define MX28_PAD_AUART2_TX__GPIO_3_9 MXS_IOMUX_PAD_NAKED(3, 9, PAD_MUXSEL_GPIO) +#define MX28_PAD_AUART2_CTS__GPIO_3_10 MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_GPIO) +#define MX28_PAD_AUART2_RTS__GPIO_3_11 MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_GPIO) +#define MX28_PAD_AUART3_RX__GPIO_3_12 MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_GPIO) +#define MX28_PAD_AUART3_TX__GPIO_3_13 MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_GPIO) +#define MX28_PAD_AUART3_CTS__GPIO_3_14 MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_GPIO) +#define MX28_PAD_AUART3_RTS__GPIO_3_15 MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_GPIO) +#define MX28_PAD_PWM0__GPIO_3_16 MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_GPIO) +#define MX28_PAD_PWM1__GPIO_3_17 MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_GPIO) +#define MX28_PAD_PWM2__GPIO_3_18 MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_GPIO) +#define MX28_PAD_SAIF0_MCLK__GPIO_3_20 MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_GPIO) +#define MX28_PAD_SAIF0_LRCLK__GPIO_3_21 MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_GPIO) +#define MX28_PAD_SAIF0_BITCLK__GPIO_3_22 MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_GPIO) +#define MX28_PAD_SAIF0_SDATA0__GPIO_3_23 MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_GPIO) +#define MX28_PAD_I2C0_SCL__GPIO_3_24 MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_GPIO) +#define MX28_PAD_I2C0_SDA__GPIO_3_25 MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_GPIO) +#define MX28_PAD_SAIF1_SDATA0__GPIO_3_26 MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_GPIO) +#define MX28_PAD_SPDIF__GPIO_3_27 MXS_IOMUX_PAD_NAKED(3, 27, PAD_MUXSEL_GPIO) +#define MX28_PAD_PWM3__GPIO_3_28 MXS_IOMUX_PAD_NAKED(3, 28, PAD_MUXSEL_GPIO) +#define MX28_PAD_PWM4__GPIO_3_29 MXS_IOMUX_PAD_NAKED(3, 29, PAD_MUXSEL_GPIO) +#define MX28_PAD_LCD_RESET__GPIO_3_30 MXS_IOMUX_PAD_NAKED(3, 30, PAD_MUXSEL_GPIO) + +#define MX28_PAD_ENET0_MDC__GPIO_4_0 MXS_IOMUX_PAD_NAKED(4, 0, PAD_MUXSEL_GPIO) +#define MX28_PAD_ENET0_MDIO__GPIO_4_1 MXS_IOMUX_PAD_NAKED(4, 1, PAD_MUXSEL_GPIO) +#define MX28_PAD_ENET0_RX_EN__GPIO_4_2 MXS_IOMUX_PAD_NAKED(4, 2, PAD_MUXSEL_GPIO) +#define MX28_PAD_ENET0_RXD0__GPIO_4_3 MXS_IOMUX_PAD_NAKED(4, 3, PAD_MUXSEL_GPIO) +#define MX28_PAD_ENET0_RXD1__GPIO_4_4 MXS_IOMUX_PAD_NAKED(4, 4, PAD_MUXSEL_GPIO) +#define MX28_PAD_ENET0_TX_CLK__GPIO_4_5 MXS_IOMUX_PAD_NAKED(4, 5, PAD_MUXSEL_GPIO) +#define MX28_PAD_ENET0_TX_EN__GPIO_4_6 MXS_IOMUX_PAD_NAKED(4, 6, PAD_MUXSEL_GPIO) +#define MX28_PAD_ENET0_TXD0__GPIO_4_7 MXS_IOMUX_PAD_NAKED(4, 7, PAD_MUXSEL_GPIO) +#define MX28_PAD_ENET0_TXD1__GPIO_4_8 MXS_IOMUX_PAD_NAKED(4, 8, PAD_MUXSEL_GPIO) +#define MX28_PAD_ENET0_RXD2__GPIO_4_9 MXS_IOMUX_PAD_NAKED(4, 9, PAD_MUXSEL_GPIO) +#define MX28_PAD_ENET0_RXD3__GPIO_4_10 MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_GPIO) +#define MX28_PAD_ENET0_TXD2__GPIO_4_11 MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_GPIO) +#define MX28_PAD_ENET0_TXD3__GPIO_4_12 MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_GPIO) +#define MX28_PAD_ENET0_RX_CLK__GPIO_4_13 MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_GPIO) +#define MX28_PAD_ENET0_COL__GPIO_4_14 MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_GPIO) +#define MX28_PAD_ENET0_CRS__GPIO_4_15 MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_GPIO) +#define MX28_PAD_ENET_CLK__GPIO_4_16 MXS_IOMUX_PAD_NAKED(4, 16, PAD_MUXSEL_GPIO) +#define MX28_PAD_JTAG_RTCK__GPIO_4_20 MXS_IOMUX_PAD_NAKED(4, 20, PAD_MUXSEL_GPIO) + +#endif /* __MACH_IOMUX_MX28_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/iomux.h b/arch/arm/mach-mxs/include/mach/iomux.h new file mode 100644 index 0000000..fe558e3 --- /dev/null +++ b/arch/arm/mach-mxs/include/mach/iomux.h @@ -0,0 +1,165 @@ +/* + * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH, + * <armlinux@phytec.de> + * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __MACH_MXS_IOMUX_H__ +#define __MACH_MXS_IOMUX_H__ + +/* + * IOMUX/PAD Bit field definitions + * + * PAD_BANK: 0..2 (3) + * PAD_PIN: 3..7 (5) + * PAD_MUXSEL: 8..9 (2) + * PAD_MA: 10..11 (2) + * PAD_MA_VALID: 12 (1) + * PAD_VOL: 13 (1) + * PAD_VOL_VALID: 14 (1) + * PAD_PULL: 15 (1) + * PAD_PULL_VALID: 16 (1) + * RESERVED: 17..31 (15) + */ +typedef u32 iomux_cfg_t; + +#define MXS_PAD_BANK_SHIFT 0 +#define MXS_PAD_BANK_MASK ((iomux_cfg_t)0x7 << MXS_PAD_BANK_SHIFT) +#define MXS_PAD_PIN_SHIFT 3 +#define MXS_PAD_PIN_MASK ((iomux_cfg_t)0x1f << MXS_PAD_PIN_SHIFT) +#define MXS_PAD_MUXSEL_SHIFT 8 +#define MXS_PAD_MUXSEL_MASK ((iomux_cfg_t)0x3 << MXS_PAD_MUXSEL_SHIFT) +#define MXS_PAD_MA_SHIFT 10 +#define MXS_PAD_MA_MASK ((iomux_cfg_t)0x3 << MXS_PAD_MA_SHIFT) +#define MXS_PAD_MA_VALID_SHIFT 12 +#define MXS_PAD_MA_VALID_MASK ((iomux_cfg_t)0x1 << MXS_PAD_MA_VALID_SHIFT) +#define MXS_PAD_VOL_SHIFT 13 +#define MXS_PAD_VOL_MASK ((iomux_cfg_t)0x1 << MXS_PAD_VOL_SHIFT) +#define MXS_PAD_VOL_VALID_SHIFT 14 +#define MXS_PAD_VOL_VALID_MASK ((iomux_cfg_t)0x1 << MXS_PAD_VOL_VALID_SHIFT) +#define MXS_PAD_PULL_SHIFT 15 +#define MXS_PAD_PULL_MASK ((iomux_cfg_t)0x1 << MXS_PAD_PULL_SHIFT) +#define MXS_PAD_PULL_VALID_SHIFT 16 +#define MXS_PAD_PULL_VALID_MASK ((iomux_cfg_t)0x1 << MXS_PAD_PULL_VALID_SHIFT) + +#define PAD_MUXSEL_0 0 +#define PAD_MUXSEL_1 1 +#define PAD_MUXSEL_2 2 +#define PAD_MUXSEL_GPIO 3 + +#define PAD_4MA 0 +#define PAD_8MA 1 +#define PAD_12MA 2 +#define PAD_16MA 3 + +#define PAD_1V8 0 +#define PAD_3V3 1 + +#define PAD_NOPULL 0 +#define PAD_PULLUP 1 + +#define MXS_PAD_4MA ((PAD_4MA << MXS_PAD_MA_SHIFT) | \ + MXS_PAD_MA_VALID_MASK) +#define MXS_PAD_8MA ((PAD_8MA << MXS_PAD_MA_SHIFT) | \ + MXS_PAD_MA_VALID_MASK) +#define MXS_PAD_12MA ((PAD_12MA << MXS_PAD_MA_SHIFT) | \ + MXS_PAD_MA_VALID_MASK) +#define MXS_PAD_16MA ((PAD_16MA << MXS_PAD_MA_SHIFT) | \ + MXS_PAD_MA_VALID_MASK) + +#define MXS_PAD_1V8 ((PAD_1V8 << MXS_PAD_VOL_SHIFT) | \ + MXS_PAD_VOL_VALID_MASK) +#define MXS_PAD_3V3 ((PAD_3V3 << MXS_PAD_VOL_SHIFT) | \ + MXS_PAD_VOL_VALID_MASK) + +#define MXS_PAD_NOPULL ((PAD_NOPULL << MXS_PAD_PULL_SHIFT) | \ + MXS_PAD_PULL_VALID_MASK) +#define MXS_PAD_PULLUP ((PAD_PULLUP << MXS_PAD_PULL_SHIFT) | \ + MXS_PAD_PULL_VALID_MASK) + +#define MXS_IOMUX_PAD(_bank, _pin, _muxsel, _ma, _vol, _pull) \ + (((iomux_cfg_t)(_bank) << MXS_PAD_BANK_SHIFT) | \ + ((iomux_cfg_t)(_pin) << MXS_PAD_PIN_SHIFT) | \ + ((iomux_cfg_t)(_muxsel) << MXS_PAD_MUXSEL_SHIFT) | \ + ((iomux_cfg_t)(_ma) << MXS_PAD_MA_SHIFT) | \ + ((iomux_cfg_t)(_vol) << MXS_PAD_VOL_SHIFT) | \ + ((iomux_cfg_t)(_pull) << MXS_PAD_PULL_SHIFT)) + +/* + * A pad becomes naked, when none of mA, vol or pull + * validity bits is set. + */ +#define MXS_IOMUX_PAD_NAKED(_bank, _pin, _muxsel) \ + MXS_IOMUX_PAD(_bank, _pin, _muxsel, 0, 0, 0) + +static inline unsigned int PAD_BANK(iomux_cfg_t pad) +{ + return (pad & MXS_PAD_BANK_MASK) >> MXS_PAD_BANK_SHIFT; +} + +static inline unsigned int PAD_PIN(iomux_cfg_t pad) +{ + return (pad & MXS_PAD_PIN_MASK) >> MXS_PAD_PIN_SHIFT; +} + +static inline unsigned int PAD_MUXSEL(iomux_cfg_t pad) +{ + return (pad & MXS_PAD_MUXSEL_MASK) >> MXS_PAD_MUXSEL_SHIFT; +} + +static inline unsigned int PAD_MA(iomux_cfg_t pad) +{ + return (pad & MXS_PAD_MA_MASK) >> MXS_PAD_MA_SHIFT; +} + +static inline unsigned int PAD_MA_VALID(iomux_cfg_t pad) +{ + return (pad & MXS_PAD_MA_VALID_MASK) >> MXS_PAD_MA_VALID_SHIFT; +} + +static inline unsigned int PAD_VOL(iomux_cfg_t pad) +{ + return (pad & MXS_PAD_VOL_MASK) >> MXS_PAD_VOL_SHIFT; +} + +static inline unsigned int PAD_VOL_VALID(iomux_cfg_t pad) +{ + return (pad & MXS_PAD_VOL_VALID_MASK) >> MXS_PAD_VOL_VALID_SHIFT; +} + +static inline unsigned int PAD_PULL(iomux_cfg_t pad) +{ + return (pad & MXS_PAD_PULL_MASK) >> MXS_PAD_PULL_SHIFT; +} + +static inline unsigned int PAD_PULL_VALID(iomux_cfg_t pad) +{ + return (pad & MXS_PAD_PULL_VALID_MASK) >> MXS_PAD_PULL_VALID_SHIFT; +} + +/* + * configures a single pad in the iomuxer + */ +int mxs_iomux_setup_pad(iomux_cfg_t pad); + +/* + * configures multiple pads + * convenient way to call the above function with tables + */ +int mxs_iomux_setup_multiple_pads(const iomux_cfg_t *pad_list, unsigned count); + +#endif /* __MACH_MXS_IOMUX_H__*/ diff --git a/arch/arm/mach-mxs/iomux.c b/arch/arm/mach-mxs/iomux.c new file mode 100644 index 0000000..0e804e2 --- /dev/null +++ b/arch/arm/mach-mxs/iomux.c @@ -0,0 +1,101 @@ +/* + * Copyright 2004-2006,2010 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> + * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH, + * <armlinux@phytec.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/string.h> +#include <linux/gpio.h> + +#include <asm/mach/map.h> + +#include <mach/mxs.h> +#include <mach/iomux.h> + +/* + * configures a single pad in the iomuxer + */ +int mxs_iomux_setup_pad(iomux_cfg_t pad) +{ + u32 reg, ofs, bp, bm; + void __iomem *iomux_base = MXS_IO_ADDRESS(MXS_PINCTRL_BASE_ADDR); + + /* muxsel */ + ofs = 0x100; + ofs += PAD_BANK(pad) * 0x20 + PAD_PIN(pad) / 16 * 0x10; + bp = PAD_PIN(pad) % 16 * 2; + bm = 0x3 << bp; + reg = __raw_readl(iomux_base + ofs); + reg &= ~bm; + reg |= PAD_MUXSEL(pad) << bp; + __raw_writel(reg, iomux_base + ofs); + + /* drive */ + ofs = cpu_is_mx23() ? 0x200 : 0x300; + ofs += PAD_BANK(pad) * 0x40 + PAD_PIN(pad) / 8 * 0x10; + /* mA */ + if (PAD_MA_VALID(pad)) { + bp = PAD_PIN(pad) % 8 * 4; + bm = 0x3 << bp; + reg = __raw_readl(iomux_base + ofs); + reg &= ~bm; + reg |= PAD_MA(pad) << bp; + __raw_writel(reg, iomux_base + ofs); + } + /* vol */ + if (PAD_VOL_VALID(pad)) { + bp = PAD_PIN(pad) % 8 * 4 + 2; + if (PAD_VOL(pad)) + __mxs_setl(1 << bp, iomux_base + ofs); + else + __mxs_clrl(1 << bp, iomux_base + ofs); + } + + /* pull */ + if (PAD_PULL_VALID(pad)) { + ofs = cpu_is_mx23() ? 0x400 : 0x600; + ofs += PAD_BANK(pad) * 0x10; + bp = PAD_PIN(pad); + if (PAD_PULL(pad)) + __mxs_setl(1 << bp, iomux_base + ofs); + else + __mxs_clrl(1 << bp, iomux_base + ofs); + } + + return 0; +} + +int mxs_iomux_setup_multiple_pads(const iomux_cfg_t *pad_list, unsigned count) +{ + const iomux_cfg_t *p = pad_list; + int i; + int ret; + + for (i = 0; i < count; i++) { + ret = mxs_iomux_setup_pad(*p); + if (ret) + return ret; + p++; + } + + return 0; +} -- 1.7.1 ^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH v8 13/15] ARM: mxs: Add initial mx23evk support 2010-12-20 14:57 [PATCH v8 00/15] ARM: mxs: Add initial support for MX23 and MX28 Shawn Guo 2010-12-20 14:57 ` [PATCH v8 05/15] ARM: mxs: Add low-level debug UART support Shawn Guo 2010-12-20 14:57 ` [PATCH v8 08/15] ARM: mxs: Add iomux support Shawn Guo @ 2010-12-20 14:57 ` Shawn Guo 2010-12-20 21:29 ` [PATCH v8 00/15] ARM: mxs: Add initial support for MX23 and MX28 Uwe Kleine-König ` (4 subsequent siblings) 7 siblings, 0 replies; 23+ messages in thread From: Shawn Guo @ 2010-12-20 14:57 UTC (permalink / raw) To: linux-arm-kernel Add initial mx23evk support with duart. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> --- Changes for v8: - Remove unnecessary line breaker Changes for v7: - Define mx23evk pads using naked pad "OR" mA/vol/pull configurations Changes for v3: - Remove inclusion of hardware.h - Add __initconst for mx23evk_pads[] Changes for v2: - Remove boot_params arch/arm/mach-mxs/mach-mx23evk.c | 57 ++++++++++++++++++++++++++++++++++++++ 1 files changed, 57 insertions(+), 0 deletions(-) create mode 100644 arch/arm/mach-mxs/mach-mx23evk.c diff --git a/arch/arm/mach-mxs/mach-mx23evk.c b/arch/arm/mach-mxs/mach-mx23evk.c new file mode 100644 index 0000000..aa06400 --- /dev/null +++ b/arch/arm/mach-mxs/mach-mx23evk.c @@ -0,0 +1,57 @@ +/* + * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/irq.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> + +#include <mach/common.h> +#include <mach/iomux-mx23.h> + +#include "devices-mx23.h" + +static const iomux_cfg_t mx23evk_pads[] __initconst = { + /* duart */ + MX23_PAD_PWM0__DUART_RX | MXS_PAD_4MA, + MX23_PAD_PWM1__DUART_TX | MXS_PAD_4MA, +}; + +static void __init mx23evk_init(void) +{ + mxs_iomux_setup_multiple_pads(mx23evk_pads, ARRAY_SIZE(mx23evk_pads)); + + mx23_add_duart(); +} + +static void __init mx23evk_timer_init(void) +{ + mx23_clocks_init(); +} + +static struct sys_timer mx23evk_timer = { + .init = mx23evk_timer_init, +}; + +MACHINE_START(MX23EVK, "Freescale MX23 EVK") + /* Maintainer: Freescale Semiconductor, Inc. */ + .map_io = mx23_map_io, + .init_irq = mx23_init_irq, + .init_machine = mx23evk_init, + .timer = &mx23evk_timer, +MACHINE_END -- 1.7.1 ^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH v8 00/15] ARM: mxs: Add initial support for MX23 and MX28 2010-12-20 14:57 [PATCH v8 00/15] ARM: mxs: Add initial support for MX23 and MX28 Shawn Guo ` (2 preceding siblings ...) 2010-12-20 14:57 ` [PATCH v8 13/15] ARM: mxs: Add initial mx23evk support Shawn Guo @ 2010-12-20 21:29 ` Uwe Kleine-König 2010-12-21 8:45 ` Shawn Guo 2010-12-21 13:26 ` Shawn Guo 2010-12-21 13:12 ` [PATCH] ARM: mxs: Change duart device to use amba-pl011 Shawn Guo ` (3 subsequent siblings) 7 siblings, 2 replies; 23+ messages in thread From: Uwe Kleine-König @ 2010-12-20 21:29 UTC (permalink / raw) To: linux-arm-kernel On Mon, Dec 20, 2010 at 10:57:41PM +0800, Shawn Guo wrote: > Changes for v8: > - Reuse debug-pl01x.S as mxs DUART is just an amba-pl011 So shouldn't "ARM: mxs: Dynamically allocate duart devices" create an amba-pl011 device? > - Remove extra space in iomux.c > - Remove uncessary line breaker in mach-mx23evk.c > > [PATCH v8 05/15] ARM: mxs: Add low-level debug UART support > [PATCH v8 08/15] ARM: mxs: Add iomux support > [PATCH v8 13/15] ARM: mxs: Add initial mx23evk support I was not yet able to boot a machine with an imx28 because of a missing rootfs (no flash, no ethernet driver) but up to there it looks good. I suggest to let Sascha take the current series to get it into the next merge window and to be able to start patching based on something. (Well unless Russell or Sascha still have objections.) I already have a few (simple) patches; I will clean them up and send them in reply to this mail. My next step is to look into the fec driver to make it work on mx28, so if anyone already has something and wants to stop me doing duplicate work, please tell me. The following changes since commit 81e8d2162566379adcf4b3700f03845c62577145: Merge branch 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip (2010-12-07 08:14:28 -0800) are available in the git repository at: git://git.pengutronix.de/git/ukl/linux-2.6.git sgu/mxs-core-v8 Shawn Guo (15): ARM: mxs: Add core definitions ARM: mxs: Add helper definition and function ARM: mxs: Add reset routines ARM: mxs: Add interrupt support ARM: mxs: Add low-level debug UART support ARM: mxs: Add timer support ARM: mxs: Add gpio support ARM: mxs: Add iomux support ARM: mxs: Add clock support ARM: mxs: Add static memory mapping ARM: mxs: Dynamically allocate duart devices ARM: mxs: Dynamically allocate fec devices ARM: mxs: Add initial mx23evk support ARM: mxs: Add initial mx28evk support ARM: mxs: Add build configuration for mxs arch/arm/Kconfig | 10 + arch/arm/Makefile | 1 + arch/arm/mach-mxs/Kconfig | 34 + arch/arm/mach-mxs/Makefile | 10 + arch/arm/mach-mxs/Makefile.boot | 1 + arch/arm/mach-mxs/clock-mx23.c | 526 ++++++++++++++++ arch/arm/mach-mxs/clock-mx28.c | 734 +++++++++++++++++++++++ arch/arm/mach-mxs/clock.c | 200 ++++++ arch/arm/mach-mxs/devices-mx23.h | 16 + arch/arm/mach-mxs/devices-mx28.h | 20 + arch/arm/mach-mxs/devices.c | 75 +++ arch/arm/mach-mxs/devices/Kconfig | 5 + arch/arm/mach-mxs/devices/Makefile | 2 + arch/arm/mach-mxs/devices/platform-duart.c | 48 ++ arch/arm/mach-mxs/devices/platform-fec.c | 50 ++ arch/arm/mach-mxs/gpio.c | 325 ++++++++++ arch/arm/mach-mxs/gpio.h | 34 + arch/arm/mach-mxs/icoll.c | 81 +++ arch/arm/mach-mxs/include/mach/clkdev.h | 7 + arch/arm/mach-mxs/include/mach/clock.h | 64 ++ arch/arm/mach-mxs/include/mach/common.h | 31 + arch/arm/mach-mxs/include/mach/debug-macro.S | 38 ++ arch/arm/mach-mxs/include/mach/devices-common.h | 46 ++ arch/arm/mach-mxs/include/mach/entry-macro.S | 41 ++ arch/arm/mach-mxs/include/mach/gpio.h | 35 ++ arch/arm/mach-mxs/include/mach/hardware.h | 29 + arch/arm/mach-mxs/include/mach/io.h | 22 + arch/arm/mach-mxs/include/mach/iomux-mx23.h | 355 +++++++++++ arch/arm/mach-mxs/include/mach/iomux-mx28.h | 537 +++++++++++++++++ arch/arm/mach-mxs/include/mach/iomux.h | 165 +++++ arch/arm/mach-mxs/include/mach/irqs.h | 32 + arch/arm/mach-mxs/include/mach/memory.h | 24 + arch/arm/mach-mxs/include/mach/mx23.h | 145 +++++ arch/arm/mach-mxs/include/mach/mx28.h | 188 ++++++ arch/arm/mach-mxs/include/mach/mxs.h | 105 ++++ arch/arm/mach-mxs/include/mach/system.h | 27 + arch/arm/mach-mxs/include/mach/timex.h | 21 + arch/arm/mach-mxs/include/mach/uncompress.h | 76 +++ arch/arm/mach-mxs/include/mach/vmalloc.h | 22 + arch/arm/mach-mxs/iomux.c | 101 ++++ arch/arm/mach-mxs/mach-mx23evk.c | 57 ++ arch/arm/mach-mxs/mach-mx28evk.c | 138 +++++ arch/arm/mach-mxs/mm-mx23.c | 45 ++ arch/arm/mach-mxs/mm-mx28.c | 45 ++ arch/arm/mach-mxs/regs-clkctrl-mx23.h | 455 ++++++++++++++ arch/arm/mach-mxs/regs-clkctrl-mx28.h | 663 ++++++++++++++++++++ arch/arm/mach-mxs/system.c | 137 +++++ arch/arm/mach-mxs/timer.c | 296 +++++++++ 48 files changed, 6119 insertions(+), 0 deletions(-) create mode 100644 arch/arm/mach-mxs/Kconfig create mode 100644 arch/arm/mach-mxs/Makefile create mode 100644 arch/arm/mach-mxs/Makefile.boot create mode 100644 arch/arm/mach-mxs/clock-mx23.c create mode 100644 arch/arm/mach-mxs/clock-mx28.c create mode 100644 arch/arm/mach-mxs/clock.c create mode 100644 arch/arm/mach-mxs/devices-mx23.h create mode 100644 arch/arm/mach-mxs/devices-mx28.h create mode 100644 arch/arm/mach-mxs/devices.c create mode 100644 arch/arm/mach-mxs/devices/Kconfig create mode 100644 arch/arm/mach-mxs/devices/Makefile create mode 100644 arch/arm/mach-mxs/devices/platform-duart.c create mode 100644 arch/arm/mach-mxs/devices/platform-fec.c create mode 100644 arch/arm/mach-mxs/gpio.c create mode 100644 arch/arm/mach-mxs/gpio.h create mode 100644 arch/arm/mach-mxs/icoll.c create mode 100644 arch/arm/mach-mxs/include/mach/clkdev.h create mode 100644 arch/arm/mach-mxs/include/mach/clock.h create mode 100644 arch/arm/mach-mxs/include/mach/common.h create mode 100644 arch/arm/mach-mxs/include/mach/debug-macro.S create mode 100644 arch/arm/mach-mxs/include/mach/devices-common.h create mode 100644 arch/arm/mach-mxs/include/mach/entry-macro.S create mode 100644 arch/arm/mach-mxs/include/mach/gpio.h create mode 100644 arch/arm/mach-mxs/include/mach/hardware.h create mode 100644 arch/arm/mach-mxs/include/mach/io.h create mode 100644 arch/arm/mach-mxs/include/mach/iomux-mx23.h create mode 100644 arch/arm/mach-mxs/include/mach/iomux-mx28.h create mode 100644 arch/arm/mach-mxs/include/mach/iomux.h create mode 100644 arch/arm/mach-mxs/include/mach/irqs.h create mode 100644 arch/arm/mach-mxs/include/mach/memory.h create mode 100644 arch/arm/mach-mxs/include/mach/mx23.h create mode 100644 arch/arm/mach-mxs/include/mach/mx28.h create mode 100644 arch/arm/mach-mxs/include/mach/mxs.h create mode 100644 arch/arm/mach-mxs/include/mach/system.h create mode 100644 arch/arm/mach-mxs/include/mach/timex.h create mode 100644 arch/arm/mach-mxs/include/mach/uncompress.h create mode 100644 arch/arm/mach-mxs/include/mach/vmalloc.h create mode 100644 arch/arm/mach-mxs/iomux.c create mode 100644 arch/arm/mach-mxs/mach-mx23evk.c create mode 100644 arch/arm/mach-mxs/mach-mx28evk.c create mode 100644 arch/arm/mach-mxs/mm-mx23.c create mode 100644 arch/arm/mach-mxs/mm-mx28.c create mode 100644 arch/arm/mach-mxs/regs-clkctrl-mx23.h create mode 100644 arch/arm/mach-mxs/regs-clkctrl-mx28.h create mode 100644 arch/arm/mach-mxs/system.c create mode 100644 arch/arm/mach-mxs/timer.c -- Pengutronix e.K. | Uwe Kleine-K?nig | Industrial Linux Solutions | http://www.pengutronix.de/ | ^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH v8 00/15] ARM: mxs: Add initial support for MX23 and MX28 2010-12-20 21:29 ` [PATCH v8 00/15] ARM: mxs: Add initial support for MX23 and MX28 Uwe Kleine-König @ 2010-12-21 8:45 ` Shawn Guo 2010-12-21 13:26 ` Shawn Guo 1 sibling, 0 replies; 23+ messages in thread From: Shawn Guo @ 2010-12-21 8:45 UTC (permalink / raw) To: linux-arm-kernel Hi Uwe, On Mon, Dec 20, 2010 at 10:29:55PM +0100, Uwe Kleine-K?nig wrote: > On Mon, Dec 20, 2010 at 10:57:41PM +0800, Shawn Guo wrote: > > Changes for v8: > > - Reuse debug-pl01x.S as mxs DUART is just an amba-pl011 > So shouldn't "ARM: mxs: Dynamically allocate duart devices" create an > amba-pl011 device? > Yes, since doing this could save the duart driver in drivers/serial. Will send a follow up patch for this soon. -- Regards, Shawn ^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH v8 00/15] ARM: mxs: Add initial support for MX23 and MX28 2010-12-20 21:29 ` [PATCH v8 00/15] ARM: mxs: Add initial support for MX23 and MX28 Uwe Kleine-König 2010-12-21 8:45 ` Shawn Guo @ 2010-12-21 13:26 ` Shawn Guo 1 sibling, 0 replies; 23+ messages in thread From: Shawn Guo @ 2010-12-21 13:26 UTC (permalink / raw) To: linux-arm-kernel Hi Uwe, On Mon, Dec 20, 2010 at 10:29:55PM +0100, Uwe Kleine-K?nig wrote: > On Mon, Dec 20, 2010 at 10:57:41PM +0800, Shawn Guo wrote: > > Changes for v8: > > - Reuse debug-pl01x.S as mxs DUART is just an amba-pl011 > So shouldn't "ARM: mxs: Dynamically allocate duart devices" create an > amba-pl011 device? > > > - Remove extra space in iomux.c > > - Remove uncessary line breaker in mach-mx23evk.c > > > > [PATCH v8 05/15] ARM: mxs: Add low-level debug UART support > > [PATCH v8 08/15] ARM: mxs: Add iomux support > > [PATCH v8 13/15] ARM: mxs: Add initial mx23evk support > > I was not yet able to boot a machine with an imx28 because of a missing > rootfs (no flash, no ethernet driver) but up to there it looks good. > > I suggest to let Sascha take the current series to get it into the next > merge window and to be able to start patching based on something. (Well > unless Russell or Sascha still have objections.) > > I already have a few (simple) patches; I will clean them up and send > them in reply to this mail. > > My next step is to look into the fec driver to make it work on mx28, so > if anyone already has something and wants to stop me doing duplicate > work, please tell me. > I already have a workable fec driver to mount nfs. If you do not mind, I would continue the effort to send out a patch in the next a few days. -- Regards, Shawn ^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH] ARM: mxs: Change duart device to use amba-pl011 2010-12-20 14:57 [PATCH v8 00/15] ARM: mxs: Add initial support for MX23 and MX28 Shawn Guo ` (3 preceding siblings ...) 2010-12-20 21:29 ` [PATCH v8 00/15] ARM: mxs: Add initial support for MX23 and MX28 Uwe Kleine-König @ 2010-12-21 13:12 ` Shawn Guo 2010-12-21 20:31 ` Wolfram Sang 2010-12-22 20:25 ` Uwe Kleine-König 2010-12-28 15:23 ` [PATCH v2] " Shawn Guo ` (2 subsequent siblings) 7 siblings, 2 replies; 23+ messages in thread From: Shawn Guo @ 2010-12-21 13:12 UTC (permalink / raw) To: linux-arm-kernel The mxs duart is actually an amba-pl011 device. This commit changes the duart device code to dynamically allocate amba-pl011 device, so that drivers/serial/amba-pl011.c can be used on mxs. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> --- This is a follow-up patch again the patch series below, which is waiting for the merge. [PATCH v8 00/15] ARM: mxs: Add initial support for MX23 and MX28 arch/arm/mach-mxs/Kconfig | 6 ++- arch/arm/mach-mxs/clock-mx23.c | 2 +- arch/arm/mach-mxs/clock-mx28.c | 2 +- arch/arm/mach-mxs/devices-mx23.h | 4 +- arch/arm/mach-mxs/devices-mx28.h | 4 +- arch/arm/mach-mxs/devices/Kconfig | 2 +- arch/arm/mach-mxs/devices/Makefile | 2 +- arch/arm/mach-mxs/devices/amba-duart.c | 39 ++++++++++++++++++ arch/arm/mach-mxs/devices/platform-duart.c | 48 ----------------------- arch/arm/mach-mxs/include/mach/devices-common.h | 9 +--- 10 files changed, 53 insertions(+), 65 deletions(-) create mode 100644 arch/arm/mach-mxs/devices/amba-duart.c delete mode 100644 arch/arm/mach-mxs/devices/platform-duart.c diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index c4ac7b4..0d072e9 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -5,17 +5,19 @@ source "arch/arm/mach-mxs/devices/Kconfig" config SOC_IMX23 bool select CPU_ARM926T + select ARM_AMBA config SOC_IMX28 bool select CPU_ARM926T + select ARM_AMBA comment "MXS platforms:" config MACH_MX23EVK bool "Support MX23EVK Platform" select SOC_IMX23 - select MXS_HAVE_PLATFORM_DUART + select MXS_HAVE_AMBA_DUART default y help Include support for MX23EVK platform. This includes specific @@ -24,7 +26,7 @@ config MACH_MX23EVK config MACH_MX28EVK bool "Support MX28EVK Platform" select SOC_IMX28 - select MXS_HAVE_PLATFORM_DUART + select MXS_HAVE_AMBA_DUART select MXS_HAVE_PLATFORM_FEC default y help diff --git a/arch/arm/mach-mxs/clock-mx23.c b/arch/arm/mach-mxs/clock-mx23.c index 8f5a19a..0f65d15 100644 --- a/arch/arm/mach-mxs/clock-mx23.c +++ b/arch/arm/mach-mxs/clock-mx23.c @@ -437,7 +437,7 @@ _DEFINE_CLOCK(clk32k_clk, XTAL, TIMROT_CLK32K_GATE, &ref_xtal_clk); }, static struct clk_lookup lookups[] = { - _REGISTER_CLOCK("mxs-duart.0", NULL, uart_clk) + _REGISTER_CLOCK("uart", NULL, uart_clk) _REGISTER_CLOCK("rtc", NULL, rtc_clk) _REGISTER_CLOCK(NULL, "hclk", hbus_clk) _REGISTER_CLOCK(NULL, "xclk", xbus_clk) diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c index 74e2103..dd6d158 100644 --- a/arch/arm/mach-mxs/clock-mx28.c +++ b/arch/arm/mach-mxs/clock-mx28.c @@ -602,7 +602,7 @@ _DEFINE_CLOCK(fec_clk, ENET, DISABLE, &hbus_clk); }, static struct clk_lookup lookups[] = { - _REGISTER_CLOCK("mxs-duart.0", NULL, uart_clk) + _REGISTER_CLOCK("uart", NULL, uart_clk) _REGISTER_CLOCK("fec.0", NULL, fec_clk) _REGISTER_CLOCK("rtc", NULL, rtc_clk) _REGISTER_CLOCK("pll2", NULL, pll2_clk) diff --git a/arch/arm/mach-mxs/devices-mx23.h b/arch/arm/mach-mxs/devices-mx23.h index d0f49fc..36397ff 100644 --- a/arch/arm/mach-mxs/devices-mx23.h +++ b/arch/arm/mach-mxs/devices-mx23.h @@ -11,6 +11,6 @@ #include <mach/mx23.h> #include <mach/devices-common.h> -extern const struct mxs_duart_data mx23_duart_data __initconst; +extern struct amba_device mx23_duart_device; #define mx23_add_duart() \ - mxs_add_duart(&mx23_duart_data) + mxs_add_duart(&mx23_duart_device) diff --git a/arch/arm/mach-mxs/devices-mx28.h b/arch/arm/mach-mxs/devices-mx28.h index 00b736c..e84a7fe 100644 --- a/arch/arm/mach-mxs/devices-mx28.h +++ b/arch/arm/mach-mxs/devices-mx28.h @@ -11,9 +11,9 @@ #include <mach/mx28.h> #include <mach/devices-common.h> -extern const struct mxs_duart_data mx28_duart_data __initconst; +extern struct amba_device mx28_duart_device; #define mx28_add_duart() \ - mxs_add_duart(&mx28_duart_data) + mxs_add_duart(&mx28_duart_device) extern const struct mxs_fec_data mx28_fec_data[] __initconst; #define mx28_add_fec(id, pdata) \ diff --git a/arch/arm/mach-mxs/devices/Kconfig b/arch/arm/mach-mxs/devices/Kconfig index a35a2dc..3dff25c 100644 --- a/arch/arm/mach-mxs/devices/Kconfig +++ b/arch/arm/mach-mxs/devices/Kconfig @@ -1,4 +1,4 @@ -config MXS_HAVE_PLATFORM_DUART +config MXS_HAVE_AMBA_DUART bool config MXS_HAVE_PLATFORM_FEC diff --git a/arch/arm/mach-mxs/devices/Makefile b/arch/arm/mach-mxs/devices/Makefile index 4b5266a..d0a09f6 100644 --- a/arch/arm/mach-mxs/devices/Makefile +++ b/arch/arm/mach-mxs/devices/Makefile @@ -1,2 +1,2 @@ -obj-$(CONFIG_MXS_HAVE_PLATFORM_DUART) += platform-duart.o +obj-$(CONFIG_MXS_HAVE_AMBA_DUART) += amba-duart.o obj-$(CONFIG_MXS_HAVE_PLATFORM_FEC) += platform-fec.o diff --git a/arch/arm/mach-mxs/devices/amba-duart.c b/arch/arm/mach-mxs/devices/amba-duart.c new file mode 100644 index 0000000..d805e22 --- /dev/null +++ b/arch/arm/mach-mxs/devices/amba-duart.c @@ -0,0 +1,39 @@ +/* + * Copyright (C) 2009-2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <mach/mx23.h> +#include <mach/mx28.h> +#include <mach/devices-common.h> + +#define MXS_AMBA_DEVICE(name, soc) \ +struct amba_device name##_device = { \ + .dev = { \ + .init_name = "uart", \ + }, \ + .res = { \ + .start = soc ## _DUART_BASE_ADDR, \ + .end = (soc ## _DUART_BASE_ADDR) + SZ_8K - 1, \ + .flags = IORESOURCE_MEM, \ + }, \ + .irq = {soc ## _INT_DUART, NO_IRQ}, \ +} + +#ifdef CONFIG_SOC_IMX23 +MXS_AMBA_DEVICE(mx23_duart, MX23); +#endif + +#ifdef CONFIG_SOC_IMX28 +MXS_AMBA_DEVICE(mx28_duart, MX28); +#endif + +int __init mxs_add_duart(struct amba_device *dev) +{ + return amba_device_register(dev, &iomem_resource); +} diff --git a/arch/arm/mach-mxs/devices/platform-duart.c b/arch/arm/mach-mxs/devices/platform-duart.c deleted file mode 100644 index 2fe0df5..0000000 --- a/arch/arm/mach-mxs/devices/platform-duart.c +++ /dev/null @@ -1,48 +0,0 @@ -/* - * Copyright (C) 2009-2010 Pengutronix - * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - * - * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. - */ -#include <mach/mx23.h> -#include <mach/mx28.h> -#include <mach/devices-common.h> - -#define mxs_duart_data_entry(soc) \ - { \ - .iobase = soc ## _DUART_BASE_ADDR, \ - .irq = soc ## _INT_DUART, \ - } - -#ifdef CONFIG_SOC_IMX23 -const struct mxs_duart_data mx23_duart_data __initconst = - mxs_duart_data_entry(MX23); -#endif - -#ifdef CONFIG_SOC_IMX28 -const struct mxs_duart_data mx28_duart_data __initconst = - mxs_duart_data_entry(MX28); -#endif - -struct platform_device *__init mxs_add_duart( - const struct mxs_duart_data *data) -{ - struct resource res[] = { - { - .start = data->iobase, - .end = data->iobase + SZ_8K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = data->irq, - .end = data->irq, - .flags = IORESOURCE_IRQ, - }, - }; - - return mxs_add_platform_device("mxs-duart", 0, res, ARRAY_SIZE(res), - NULL, 0); -} diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h index 3da48d4..fca0551 100644 --- a/arch/arm/mach-mxs/include/mach/devices-common.h +++ b/arch/arm/mach-mxs/include/mach/devices-common.h @@ -9,6 +9,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/init.h> +#include <linux/amba/bus.h> struct platform_device *mxs_add_platform_device_dmamask( const char *name, int id, @@ -25,13 +26,7 @@ static inline struct platform_device *mxs_add_platform_device( } /* duart */ -struct mxs_duart_data { - resource_size_t iobase; - resource_size_t iosize; - resource_size_t irq; -}; -struct platform_device *__init mxs_add_duart( - const struct mxs_duart_data *data); +int __init mxs_add_duart(struct amba_device *dev); /* fec */ #include <linux/fec.h> -- 1.7.1 ^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH] ARM: mxs: Change duart device to use amba-pl011 2010-12-21 13:12 ` [PATCH] ARM: mxs: Change duart device to use amba-pl011 Shawn Guo @ 2010-12-21 20:31 ` Wolfram Sang 2010-12-22 2:10 ` Shawn Guo 2010-12-22 20:25 ` Uwe Kleine-König 1 sibling, 1 reply; 23+ messages in thread From: Wolfram Sang @ 2010-12-21 20:31 UTC (permalink / raw) To: linux-arm-kernel Hi Shawn, On Tue, Dec 21, 2010 at 09:12:10PM +0800, Shawn Guo wrote: > The mxs duart is actually an amba-pl011 device. This commit changes > the duart device code to dynamically allocate amba-pl011 device, > so that drivers/serial/amba-pl011.c can be used on mxs. > > Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Great that it works! > --- > This is a follow-up patch again the patch series below, which is > waiting for the merge. > > [PATCH v8 00/15] ARM: mxs: Add initial support for MX23 and MX28 > > arch/arm/mach-mxs/Kconfig | 6 ++- > arch/arm/mach-mxs/clock-mx23.c | 2 +- > arch/arm/mach-mxs/clock-mx28.c | 2 +- > arch/arm/mach-mxs/devices-mx23.h | 4 +- > arch/arm/mach-mxs/devices-mx28.h | 4 +- > arch/arm/mach-mxs/devices/Kconfig | 2 +- > arch/arm/mach-mxs/devices/Makefile | 2 +- > arch/arm/mach-mxs/devices/amba-duart.c | 39 ++++++++++++++++++ > arch/arm/mach-mxs/devices/platform-duart.c | 48 ----------------------- > arch/arm/mach-mxs/include/mach/devices-common.h | 9 +--- > 10 files changed, 53 insertions(+), 65 deletions(-) > create mode 100644 arch/arm/mach-mxs/devices/amba-duart.c > delete mode 100644 arch/arm/mach-mxs/devices/platform-duart.c > > diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig > index c4ac7b4..0d072e9 100644 > --- a/arch/arm/mach-mxs/Kconfig > +++ b/arch/arm/mach-mxs/Kconfig > @@ -5,17 +5,19 @@ source "arch/arm/mach-mxs/devices/Kconfig" > config SOC_IMX23 > bool > select CPU_ARM926T > + select ARM_AMBA > > config SOC_IMX28 > bool > select CPU_ARM926T > + select ARM_AMBA > > comment "MXS platforms:" > > config MACH_MX23EVK > bool "Support MX23EVK Platform" > select SOC_IMX23 > - select MXS_HAVE_PLATFORM_DUART > + select MXS_HAVE_AMBA_DUART > default y > help > Include support for MX23EVK platform. This includes specific > @@ -24,7 +26,7 @@ config MACH_MX23EVK > config MACH_MX28EVK > bool "Support MX28EVK Platform" > select SOC_IMX28 > - select MXS_HAVE_PLATFORM_DUART > + select MXS_HAVE_AMBA_DUART > select MXS_HAVE_PLATFORM_FEC > default y > help > diff --git a/arch/arm/mach-mxs/clock-mx23.c b/arch/arm/mach-mxs/clock-mx23.c > index 8f5a19a..0f65d15 100644 > --- a/arch/arm/mach-mxs/clock-mx23.c > +++ b/arch/arm/mach-mxs/clock-mx23.c > @@ -437,7 +437,7 @@ _DEFINE_CLOCK(clk32k_clk, XTAL, TIMROT_CLK32K_GATE, &ref_xtal_clk); > }, > > static struct clk_lookup lookups[] = { > - _REGISTER_CLOCK("mxs-duart.0", NULL, uart_clk) > + _REGISTER_CLOCK("uart", NULL, uart_clk) Maybe "duart"? > _REGISTER_CLOCK("rtc", NULL, rtc_clk) > _REGISTER_CLOCK(NULL, "hclk", hbus_clk) > _REGISTER_CLOCK(NULL, "xclk", xbus_clk) > diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c > index 74e2103..dd6d158 100644 > --- a/arch/arm/mach-mxs/clock-mx28.c > +++ b/arch/arm/mach-mxs/clock-mx28.c > @@ -602,7 +602,7 @@ _DEFINE_CLOCK(fec_clk, ENET, DISABLE, &hbus_clk); > }, > > static struct clk_lookup lookups[] = { > - _REGISTER_CLOCK("mxs-duart.0", NULL, uart_clk) > + _REGISTER_CLOCK("uart", NULL, uart_clk) Maybe "duart"? > _REGISTER_CLOCK("fec.0", NULL, fec_clk) > _REGISTER_CLOCK("rtc", NULL, rtc_clk) > _REGISTER_CLOCK("pll2", NULL, pll2_clk) > diff --git a/arch/arm/mach-mxs/devices-mx23.h b/arch/arm/mach-mxs/devices-mx23.h > index d0f49fc..36397ff 100644 > --- a/arch/arm/mach-mxs/devices-mx23.h > +++ b/arch/arm/mach-mxs/devices-mx23.h > @@ -11,6 +11,6 @@ > #include <mach/mx23.h> > #include <mach/devices-common.h> > > -extern const struct mxs_duart_data mx23_duart_data __initconst; > +extern struct amba_device mx23_duart_device; > #define mx23_add_duart() \ > - mxs_add_duart(&mx23_duart_data) > + mxs_add_duart(&mx23_duart_device) > diff --git a/arch/arm/mach-mxs/devices-mx28.h b/arch/arm/mach-mxs/devices-mx28.h > index 00b736c..e84a7fe 100644 > --- a/arch/arm/mach-mxs/devices-mx28.h > +++ b/arch/arm/mach-mxs/devices-mx28.h > @@ -11,9 +11,9 @@ > #include <mach/mx28.h> > #include <mach/devices-common.h> > > -extern const struct mxs_duart_data mx28_duart_data __initconst; > +extern struct amba_device mx28_duart_device; > #define mx28_add_duart() \ > - mxs_add_duart(&mx28_duart_data) > + mxs_add_duart(&mx28_duart_device) > > extern const struct mxs_fec_data mx28_fec_data[] __initconst; > #define mx28_add_fec(id, pdata) \ > diff --git a/arch/arm/mach-mxs/devices/Kconfig b/arch/arm/mach-mxs/devices/Kconfig > index a35a2dc..3dff25c 100644 > --- a/arch/arm/mach-mxs/devices/Kconfig > +++ b/arch/arm/mach-mxs/devices/Kconfig > @@ -1,4 +1,4 @@ > -config MXS_HAVE_PLATFORM_DUART > +config MXS_HAVE_AMBA_DUART > bool > > config MXS_HAVE_PLATFORM_FEC > diff --git a/arch/arm/mach-mxs/devices/Makefile b/arch/arm/mach-mxs/devices/Makefile > index 4b5266a..d0a09f6 100644 > --- a/arch/arm/mach-mxs/devices/Makefile > +++ b/arch/arm/mach-mxs/devices/Makefile > @@ -1,2 +1,2 @@ > -obj-$(CONFIG_MXS_HAVE_PLATFORM_DUART) += platform-duart.o > +obj-$(CONFIG_MXS_HAVE_AMBA_DUART) += amba-duart.o > obj-$(CONFIG_MXS_HAVE_PLATFORM_FEC) += platform-fec.o > diff --git a/arch/arm/mach-mxs/devices/amba-duart.c b/arch/arm/mach-mxs/devices/amba-duart.c > new file mode 100644 > index 0000000..d805e22 > --- /dev/null > +++ b/arch/arm/mach-mxs/devices/amba-duart.c > @@ -0,0 +1,39 @@ > +/* > + * Copyright (C) 2009-2010 Pengutronix > + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> > + * > + * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved. > + * > + * This program is free software; you can redistribute it and/or modify it under > + * the terms of the GNU General Public License version 2 as published by the > + * Free Software Foundation. > + */ > +#include <mach/mx23.h> > +#include <mach/mx28.h> > +#include <mach/devices-common.h> > + > +#define MXS_AMBA_DEVICE(name, soc) \ Maybe MXS_AMBA_DUART_DEVICE? It now sounds more generic than it actually is ;) > +struct amba_device name##_device = { \ > + .dev = { \ > + .init_name = "uart", \ "duart" again? > + }, \ > + .res = { \ > + .start = soc ## _DUART_BASE_ADDR, \ > + .end = (soc ## _DUART_BASE_ADDR) + SZ_8K - 1, \ > + .flags = IORESOURCE_MEM, \ > + }, \ > + .irq = {soc ## _INT_DUART, NO_IRQ}, \ > +} [...] Kind regards, Wolfram -- Pengutronix e.K. | Wolfram Sang | Industrial Linux Solutions | http://www.pengutronix.de/ | -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 197 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20101221/349e7817/attachment.sig> ^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH] ARM: mxs: Change duart device to use amba-pl011 2010-12-21 20:31 ` Wolfram Sang @ 2010-12-22 2:10 ` Shawn Guo 2010-12-22 11:41 ` Wolfram Sang 0 siblings, 1 reply; 23+ messages in thread From: Shawn Guo @ 2010-12-22 2:10 UTC (permalink / raw) To: linux-arm-kernel Hi Wolfram, Thanks for the review. On Tue, Dec 21, 2010 at 09:31:21PM +0100, Wolfram Sang wrote: > Hi Shawn, > > On Tue, Dec 21, 2010 at 09:12:10PM +0800, Shawn Guo wrote: > > The mxs duart is actually an amba-pl011 device. This commit changes > > the duart device code to dynamically allocate amba-pl011 device, > > so that drivers/serial/amba-pl011.c can be used on mxs. > > > > Signed-off-by: Shawn Guo <shawn.guo@freescale.com> > > Great that it works! > [...] > > static struct clk_lookup lookups[] = { > > - _REGISTER_CLOCK("mxs-duart.0", NULL, uart_clk) > > + _REGISTER_CLOCK("uart", NULL, uart_clk) > > Maybe "duart"? > I was thinking about the naming "uart" vs "duart" here, and decided to pick the "uart", because this is the name of clock "uart_clk", which is the clock for uart domain, not only duart. [...] > > +#include <mach/mx23.h> > > +#include <mach/mx28.h> > > +#include <mach/devices-common.h> > > + > > +#define MXS_AMBA_DEVICE(name, soc) \ > > Maybe MXS_AMBA_DUART_DEVICE? It now sounds more generic than it actually is ;) > OK. Will change. -- Regards, Shawn ^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH] ARM: mxs: Change duart device to use amba-pl011 2010-12-22 2:10 ` Shawn Guo @ 2010-12-22 11:41 ` Wolfram Sang 0 siblings, 0 replies; 23+ messages in thread From: Wolfram Sang @ 2010-12-22 11:41 UTC (permalink / raw) To: linux-arm-kernel Hi Shawn, On Wed, Dec 22, 2010 at 10:10:50AM +0800, Shawn Guo wrote: > [...] > > > static struct clk_lookup lookups[] = { > > > - _REGISTER_CLOCK("mxs-duart.0", NULL, uart_clk) > > > + _REGISTER_CLOCK("uart", NULL, uart_clk) > > > > Maybe "duart"? > > > I was thinking about the naming "uart" vs "duart" here, and decided to > pick the "uart", because this is the name of clock "uart_clk", which > is the clock for uart domain, not only duart. Makes sense. Thanks, Wolfram -- Pengutronix e.K. | Wolfram Sang | Industrial Linux Solutions | http://www.pengutronix.de/ | -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 198 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20101222/aab050cb/attachment.sig> ^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH] ARM: mxs: Change duart device to use amba-pl011 2010-12-21 13:12 ` [PATCH] ARM: mxs: Change duart device to use amba-pl011 Shawn Guo 2010-12-21 20:31 ` Wolfram Sang @ 2010-12-22 20:25 ` Uwe Kleine-König 2010-12-27 11:49 ` Shawn Guo 2011-01-03 10:35 ` Russell King - ARM Linux 1 sibling, 2 replies; 23+ messages in thread From: Uwe Kleine-König @ 2010-12-22 20:25 UTC (permalink / raw) To: linux-arm-kernel Hello Shawn, On Tue, Dec 21, 2010 at 09:12:10PM +0800, Shawn Guo wrote: > The mxs duart is actually an amba-pl011 device. This commit changes > the duart device code to dynamically allocate amba-pl011 device, > so that drivers/serial/amba-pl011.c can be used on mxs. I have problems using this. The problem I found up to now is that during probe of the device (triggered by mxs_add_duart -> amba_device_register -> amba_put_disable_pclk) the uart clock is disabled. This happens because initially its usage count is 0 but the clock is enabled by barebox. clk_enable doesn't hurt, but in the matching clk_disable the usage count drops to zero again and so the clock is disabled in hardware. After that no further outputs can be seen. I assume the machine dies with a circular exception while trying to write something out (e.g. that it cannot write to the console :-), but I havn't checked that. My first try to put an clk_enable(&uart_clk) after it is registered didn't help. Did you face the same problem? Best regards Uwe -- Pengutronix e.K. | Uwe Kleine-K?nig | Industrial Linux Solutions | http://www.pengutronix.de/ | ^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH] ARM: mxs: Change duart device to use amba-pl011 2010-12-22 20:25 ` Uwe Kleine-König @ 2010-12-27 11:49 ` Shawn Guo 2010-12-29 8:38 ` Uwe Kleine-König 2011-01-03 10:39 ` Russell King - ARM Linux 2011-01-03 10:35 ` Russell King - ARM Linux 1 sibling, 2 replies; 23+ messages in thread From: Shawn Guo @ 2010-12-27 11:49 UTC (permalink / raw) To: linux-arm-kernel Hi Uwe, On Wed, Dec 22, 2010 at 09:25:42PM +0100, Uwe Kleine-K?nig wrote: > Hello Shawn, > > On Tue, Dec 21, 2010 at 09:12:10PM +0800, Shawn Guo wrote: > > The mxs duart is actually an amba-pl011 device. This commit changes > > the duart device code to dynamically allocate amba-pl011 device, > > so that drivers/serial/amba-pl011.c can be used on mxs. > I have problems using this. The problem I found up to now is that > during probe of the device (triggered by mxs_add_duart -> > amba_device_register -> amba_put_disable_pclk) the uart clock is > disabled. This happens because initially its usage count is 0 but the > clock is enabled by barebox. clk_enable doesn't hurt, but in the > matching clk_disable the usage count drops to zero again and so the > clock is disabled in hardware. After that no further outputs can be > seen. > I did not see this problem. It's true that the clock is turned off in amba_device_register. But later, the clock will be turned on again by amba_probe -> amba_get_enable_pclk very soon. But we should add something like below in mx28_clocks_init to reflect the clock status and get usecount updated. clk_enable(&uart_clk) I ran into similar problem with fec driver, and would cover that in fec patch set. > I assume the machine dies with a circular exception while trying to > write something out (e.g. that it cannot write to the console :-), but I > havn't checked that. > > My first try to put an clk_enable(&uart_clk) after it is registered > didn't help. > > Did you face the same problem? > > Best regards > Uwe > > -- > Pengutronix e.K. | Uwe Kleine-K?nig | > Industrial Linux Solutions | http://www.pengutronix.de/ | > -- Regards, Shawn ^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH] ARM: mxs: Change duart device to use amba-pl011 2010-12-27 11:49 ` Shawn Guo @ 2010-12-29 8:38 ` Uwe Kleine-König 2011-01-03 10:39 ` Russell King - ARM Linux 1 sibling, 0 replies; 23+ messages in thread From: Uwe Kleine-König @ 2010-12-29 8:38 UTC (permalink / raw) To: linux-arm-kernel Hello Shawn, On Mon, Dec 27, 2010 at 07:49:40PM +0800, Shawn Guo wrote: > On Wed, Dec 22, 2010 at 09:25:42PM +0100, Uwe Kleine-K?nig wrote: > > On Tue, Dec 21, 2010 at 09:12:10PM +0800, Shawn Guo wrote: > > > The mxs duart is actually an amba-pl011 device. This commit changes > > > the duart device code to dynamically allocate amba-pl011 device, > > > so that drivers/serial/amba-pl011.c can be used on mxs. > > I have problems using this. The problem I found up to now is that > > during probe of the device (triggered by mxs_add_duart -> > > amba_device_register -> amba_put_disable_pclk) the uart clock is > > disabled. This happens because initially its usage count is 0 but the > > clock is enabled by barebox. clk_enable doesn't hurt, but in the > > matching clk_disable the usage count drops to zero again and so the > > clock is disabled in hardware. After that no further outputs can be > > seen. > > > I did not see this problem. It's true that the clock is turned off > in amba_device_register. But later, the clock will be turned on > again by amba_probe -> amba_get_enable_pclk very soon. This is only a problem with DEBUG_LL I guess. Best regards Uwe -- Pengutronix e.K. | Uwe Kleine-K?nig | Industrial Linux Solutions | http://www.pengutronix.de/ | ^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH] ARM: mxs: Change duart device to use amba-pl011 2010-12-27 11:49 ` Shawn Guo 2010-12-29 8:38 ` Uwe Kleine-König @ 2011-01-03 10:39 ` Russell King - ARM Linux 2011-01-04 5:41 ` Shawn Guo 1 sibling, 1 reply; 23+ messages in thread From: Russell King - ARM Linux @ 2011-01-03 10:39 UTC (permalink / raw) To: linux-arm-kernel On Mon, Dec 27, 2010 at 07:49:40PM +0800, Shawn Guo wrote: > I did not see this problem. It's true that the clock is turned off > in amba_device_register. But later, the clock will be turned on > again by amba_probe -> amba_get_enable_pclk very soon. > > But we should add something like below in mx28_clocks_init to reflect > the clock status and get usecount updated. > > clk_enable(&uart_clk) > > I ran into similar problem with fec driver, and would cover that in > fec patch set. This sounds like entirely the wrong approach. Please take some time to understand that there are different clocks which do different things. The PCLK is the name ARM Ltd give to the APB bus clock. This we name apb_pclk, and we expect platforms to provide it where possible. This name will be looked up for every primecell device on the system. If you don't provide an apb_pclk, it will find the device specific function clock. This in itself is no bad thing, unless you use the device outside of the AMBA driver (iow, before probe or after remove) and helps identify when you've forgotten to provide an apb_pclk. ^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH] ARM: mxs: Change duart device to use amba-pl011 2011-01-03 10:39 ` Russell King - ARM Linux @ 2011-01-04 5:41 ` Shawn Guo 0 siblings, 0 replies; 23+ messages in thread From: Shawn Guo @ 2011-01-04 5:41 UTC (permalink / raw) To: linux-arm-kernel Hi Russell, On Mon, Jan 03, 2011 at 10:39:13AM +0000, Russell King - ARM Linux wrote: > On Mon, Dec 27, 2010 at 07:49:40PM +0800, Shawn Guo wrote: > > I did not see this problem. It's true that the clock is turned off > > in amba_device_register. But later, the clock will be turned on > > again by amba_probe -> amba_get_enable_pclk very soon. > > > > But we should add something like below in mx28_clocks_init to reflect > > the clock status and get usecount updated. > > > > clk_enable(&uart_clk) > > > > I ran into similar problem with fec driver, and would cover that in > > fec patch set. > > This sounds like entirely the wrong approach. Please take some time to > understand that there are different clocks which do different things. > > The PCLK is the name ARM Ltd give to the APB bus clock. This we name > apb_pclk, and we expect platforms to provide it where possible. This > name will be looked up for every primecell device on the system. > > If you don't provide an apb_pclk, it will find the device specific > function clock. This in itself is no bad thing, unless you use the > device outside of the AMBA driver (iow, before probe or after remove) > and helps identify when you've forgotten to provide an apb_pclk. > I intended to let the amba bus driver get duart clock. But you are right, I should provide an apb_pclk since it actually exists on mxs processors. In case of duart, it is xbus (apbx) clock. _REGISTER_CLOCK("duart", "apb_pclk", xbus_clk) Thanks for the comment. -- Regards, Shawn ^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH] ARM: mxs: Change duart device to use amba-pl011 2010-12-22 20:25 ` Uwe Kleine-König 2010-12-27 11:49 ` Shawn Guo @ 2011-01-03 10:35 ` Russell King - ARM Linux 1 sibling, 0 replies; 23+ messages in thread From: Russell King - ARM Linux @ 2011-01-03 10:35 UTC (permalink / raw) To: linux-arm-kernel On Wed, Dec 22, 2010 at 09:25:42PM +0100, Uwe Kleine-K?nig wrote: > Hello Shawn, > > On Tue, Dec 21, 2010 at 09:12:10PM +0800, Shawn Guo wrote: > > The mxs duart is actually an amba-pl011 device. This commit changes > > the duart device code to dynamically allocate amba-pl011 device, > > so that drivers/serial/amba-pl011.c can be used on mxs. > I have problems using this. The problem I found up to now is that > during probe of the device (triggered by mxs_add_duart -> > amba_device_register -> amba_put_disable_pclk) the uart clock is > disabled. Which uart clock is disabled? The PCLK or the UARTCLK (names as defined in the ARM PL011 TRM). If the pclk code is disabling the UARTCLK, then add a dummy apb_pclk to your clock lookups, which is what everyone else who can't control the APB PCLK does. ^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH v2] ARM: mxs: Change duart device to use amba-pl011 2010-12-20 14:57 [PATCH v8 00/15] ARM: mxs: Add initial support for MX23 and MX28 Shawn Guo ` (4 preceding siblings ...) 2010-12-21 13:12 ` [PATCH] ARM: mxs: Change duart device to use amba-pl011 Shawn Guo @ 2010-12-28 15:23 ` Shawn Guo 2010-12-29 9:12 ` Uwe Kleine-König 2010-12-31 5:50 ` [PATCH v3] " Shawn Guo 2011-01-04 6:20 ` [PATCH v4] " Shawn Guo 7 siblings, 1 reply; 23+ messages in thread From: Shawn Guo @ 2010-12-28 15:23 UTC (permalink / raw) To: linux-arm-kernel The mxs duart is actually an amba-pl011 device. This commit changes the duart device code to dynamically allocate amba-pl011 device, so that drivers/serial/amba-pl011.c can be used on mxs. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> --- Changes for v2: - Add #include <asm/irq.h> into amba-duart.c. When cleaning headers includsion in other files, compiler start complaining NO_IRQ not defined, so add the inclusion to fix it. - Change MXS_AMBA_DEVICE to MXS_AMBA_DUART_DEVICE arch/arm/mach-mxs/Kconfig | 6 ++- arch/arm/mach-mxs/clock-mx23.c | 2 +- arch/arm/mach-mxs/clock-mx28.c | 2 +- arch/arm/mach-mxs/devices-mx23.h | 4 +- arch/arm/mach-mxs/devices-mx28.h | 4 +- arch/arm/mach-mxs/devices/Kconfig | 2 +- arch/arm/mach-mxs/devices/Makefile | 2 +- arch/arm/mach-mxs/devices/amba-duart.c | 40 +++++++++++++++++++ arch/arm/mach-mxs/devices/platform-duart.c | 48 ----------------------- arch/arm/mach-mxs/include/mach/devices-common.h | 9 +--- 10 files changed, 54 insertions(+), 65 deletions(-) create mode 100644 arch/arm/mach-mxs/devices/amba-duart.c delete mode 100644 arch/arm/mach-mxs/devices/platform-duart.c diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index c4ac7b4..0d072e9 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -5,17 +5,19 @@ source "arch/arm/mach-mxs/devices/Kconfig" config SOC_IMX23 bool select CPU_ARM926T + select ARM_AMBA config SOC_IMX28 bool select CPU_ARM926T + select ARM_AMBA comment "MXS platforms:" config MACH_MX23EVK bool "Support MX23EVK Platform" select SOC_IMX23 - select MXS_HAVE_PLATFORM_DUART + select MXS_HAVE_AMBA_DUART default y help Include support for MX23EVK platform. This includes specific @@ -24,7 +26,7 @@ config MACH_MX23EVK config MACH_MX28EVK bool "Support MX28EVK Platform" select SOC_IMX28 - select MXS_HAVE_PLATFORM_DUART + select MXS_HAVE_AMBA_DUART select MXS_HAVE_PLATFORM_FEC default y help diff --git a/arch/arm/mach-mxs/clock-mx23.c b/arch/arm/mach-mxs/clock-mx23.c index 8f5a19a..0f65d15 100644 --- a/arch/arm/mach-mxs/clock-mx23.c +++ b/arch/arm/mach-mxs/clock-mx23.c @@ -437,7 +437,7 @@ _DEFINE_CLOCK(clk32k_clk, XTAL, TIMROT_CLK32K_GATE, &ref_xtal_clk); }, static struct clk_lookup lookups[] = { - _REGISTER_CLOCK("mxs-duart.0", NULL, uart_clk) + _REGISTER_CLOCK("uart", NULL, uart_clk) _REGISTER_CLOCK("rtc", NULL, rtc_clk) _REGISTER_CLOCK(NULL, "hclk", hbus_clk) _REGISTER_CLOCK(NULL, "xclk", xbus_clk) diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c index 74e2103..dd6d158 100644 --- a/arch/arm/mach-mxs/clock-mx28.c +++ b/arch/arm/mach-mxs/clock-mx28.c @@ -602,7 +602,7 @@ _DEFINE_CLOCK(fec_clk, ENET, DISABLE, &hbus_clk); }, static struct clk_lookup lookups[] = { - _REGISTER_CLOCK("mxs-duart.0", NULL, uart_clk) + _REGISTER_CLOCK("uart", NULL, uart_clk) _REGISTER_CLOCK("fec.0", NULL, fec_clk) _REGISTER_CLOCK("rtc", NULL, rtc_clk) _REGISTER_CLOCK("pll2", NULL, pll2_clk) diff --git a/arch/arm/mach-mxs/devices-mx23.h b/arch/arm/mach-mxs/devices-mx23.h index d0f49fc..36397ff 100644 --- a/arch/arm/mach-mxs/devices-mx23.h +++ b/arch/arm/mach-mxs/devices-mx23.h @@ -11,6 +11,6 @@ #include <mach/mx23.h> #include <mach/devices-common.h> -extern const struct mxs_duart_data mx23_duart_data __initconst; +extern struct amba_device mx23_duart_device; #define mx23_add_duart() \ - mxs_add_duart(&mx23_duart_data) + mxs_add_duart(&mx23_duart_device) diff --git a/arch/arm/mach-mxs/devices-mx28.h b/arch/arm/mach-mxs/devices-mx28.h index 00b736c..e84a7fe 100644 --- a/arch/arm/mach-mxs/devices-mx28.h +++ b/arch/arm/mach-mxs/devices-mx28.h @@ -11,9 +11,9 @@ #include <mach/mx28.h> #include <mach/devices-common.h> -extern const struct mxs_duart_data mx28_duart_data __initconst; +extern struct amba_device mx28_duart_device; #define mx28_add_duart() \ - mxs_add_duart(&mx28_duart_data) + mxs_add_duart(&mx28_duart_device) extern const struct mxs_fec_data mx28_fec_data[] __initconst; #define mx28_add_fec(id, pdata) \ diff --git a/arch/arm/mach-mxs/devices/Kconfig b/arch/arm/mach-mxs/devices/Kconfig index a35a2dc..3dff25c 100644 --- a/arch/arm/mach-mxs/devices/Kconfig +++ b/arch/arm/mach-mxs/devices/Kconfig @@ -1,4 +1,4 @@ -config MXS_HAVE_PLATFORM_DUART +config MXS_HAVE_AMBA_DUART bool config MXS_HAVE_PLATFORM_FEC diff --git a/arch/arm/mach-mxs/devices/Makefile b/arch/arm/mach-mxs/devices/Makefile index 4b5266a..d0a09f6 100644 --- a/arch/arm/mach-mxs/devices/Makefile +++ b/arch/arm/mach-mxs/devices/Makefile @@ -1,2 +1,2 @@ -obj-$(CONFIG_MXS_HAVE_PLATFORM_DUART) += platform-duart.o +obj-$(CONFIG_MXS_HAVE_AMBA_DUART) += amba-duart.o obj-$(CONFIG_MXS_HAVE_PLATFORM_FEC) += platform-fec.o diff --git a/arch/arm/mach-mxs/devices/amba-duart.c b/arch/arm/mach-mxs/devices/amba-duart.c new file mode 100644 index 0000000..aa77d28 --- /dev/null +++ b/arch/arm/mach-mxs/devices/amba-duart.c @@ -0,0 +1,40 @@ +/* + * Copyright (C) 2009-2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <asm/irq.h> +#include <mach/mx23.h> +#include <mach/mx28.h> +#include <mach/devices-common.h> + +#define MXS_AMBA_DUART_DEVICE(name, soc) \ +struct amba_device name##_device = { \ + .dev = { \ + .init_name = "uart", \ + }, \ + .res = { \ + .start = soc ## _DUART_BASE_ADDR, \ + .end = (soc ## _DUART_BASE_ADDR) + SZ_8K - 1, \ + .flags = IORESOURCE_MEM, \ + }, \ + .irq = {soc ## _INT_DUART, NO_IRQ}, \ +} + +#ifdef CONFIG_SOC_IMX23 +MXS_AMBA_DUART_DEVICE(mx23_duart, MX23); +#endif + +#ifdef CONFIG_SOC_IMX28 +MXS_AMBA_DUART_DEVICE(mx28_duart, MX28); +#endif + +int __init mxs_add_duart(struct amba_device *dev) +{ + return amba_device_register(dev, &iomem_resource); +} diff --git a/arch/arm/mach-mxs/devices/platform-duart.c b/arch/arm/mach-mxs/devices/platform-duart.c deleted file mode 100644 index 2fe0df5..0000000 --- a/arch/arm/mach-mxs/devices/platform-duart.c +++ /dev/null @@ -1,48 +0,0 @@ -/* - * Copyright (C) 2009-2010 Pengutronix - * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - * - * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. - */ -#include <mach/mx23.h> -#include <mach/mx28.h> -#include <mach/devices-common.h> - -#define mxs_duart_data_entry(soc) \ - { \ - .iobase = soc ## _DUART_BASE_ADDR, \ - .irq = soc ## _INT_DUART, \ - } - -#ifdef CONFIG_SOC_IMX23 -const struct mxs_duart_data mx23_duart_data __initconst = - mxs_duart_data_entry(MX23); -#endif - -#ifdef CONFIG_SOC_IMX28 -const struct mxs_duart_data mx28_duart_data __initconst = - mxs_duart_data_entry(MX28); -#endif - -struct platform_device *__init mxs_add_duart( - const struct mxs_duart_data *data) -{ - struct resource res[] = { - { - .start = data->iobase, - .end = data->iobase + SZ_8K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = data->irq, - .end = data->irq, - .flags = IORESOURCE_IRQ, - }, - }; - - return mxs_add_platform_device("mxs-duart", 0, res, ARRAY_SIZE(res), - NULL, 0); -} diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h index 3da48d4..fca0551 100644 --- a/arch/arm/mach-mxs/include/mach/devices-common.h +++ b/arch/arm/mach-mxs/include/mach/devices-common.h @@ -9,6 +9,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/init.h> +#include <linux/amba/bus.h> struct platform_device *mxs_add_platform_device_dmamask( const char *name, int id, @@ -25,13 +26,7 @@ static inline struct platform_device *mxs_add_platform_device( } /* duart */ -struct mxs_duart_data { - resource_size_t iobase; - resource_size_t iosize; - resource_size_t irq; -}; -struct platform_device *__init mxs_add_duart( - const struct mxs_duart_data *data); +int __init mxs_add_duart(struct amba_device *dev); /* fec */ #include <linux/fec.h> -- 1.7.1 ^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH v2] ARM: mxs: Change duart device to use amba-pl011 2010-12-28 15:23 ` [PATCH v2] " Shawn Guo @ 2010-12-29 9:12 ` Uwe Kleine-König 2010-12-31 5:16 ` Shawn Guo 0 siblings, 1 reply; 23+ messages in thread From: Uwe Kleine-König @ 2010-12-29 9:12 UTC (permalink / raw) To: linux-arm-kernel Hello Shawn, just a few thought that came to my mind when reading your patch ... On Tue, Dec 28, 2010 at 11:23:14PM +0800, Shawn Guo wrote: > The mxs duart is actually an amba-pl011 device. This commit changes > the duart device code to dynamically allocate amba-pl011 device, > so that drivers/serial/amba-pl011.c can be used on mxs. > > Signed-off-by: Shawn Guo <shawn.guo@freescale.com> > --- > Changes for v2: > - Add #include <asm/irq.h> into amba-duart.c. When cleaning headers > includsion in other files, compiler start complaining NO_IRQ not > defined, so add the inclusion to fix it. > - Change MXS_AMBA_DEVICE to MXS_AMBA_DUART_DEVICE > > arch/arm/mach-mxs/Kconfig | 6 ++- > arch/arm/mach-mxs/clock-mx23.c | 2 +- > arch/arm/mach-mxs/clock-mx28.c | 2 +- > arch/arm/mach-mxs/devices-mx23.h | 4 +- > arch/arm/mach-mxs/devices-mx28.h | 4 +- > arch/arm/mach-mxs/devices/Kconfig | 2 +- > arch/arm/mach-mxs/devices/Makefile | 2 +- > arch/arm/mach-mxs/devices/amba-duart.c | 40 +++++++++++++++++++ > arch/arm/mach-mxs/devices/platform-duart.c | 48 ----------------------- > arch/arm/mach-mxs/include/mach/devices-common.h | 9 +--- > 10 files changed, 54 insertions(+), 65 deletions(-) > create mode 100644 arch/arm/mach-mxs/devices/amba-duart.c > delete mode 100644 arch/arm/mach-mxs/devices/platform-duart.c > > diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig > index c4ac7b4..0d072e9 100644 > --- a/arch/arm/mach-mxs/Kconfig > +++ b/arch/arm/mach-mxs/Kconfig > @@ -5,17 +5,19 @@ source "arch/arm/mach-mxs/devices/Kconfig" > config SOC_IMX23 > bool > select CPU_ARM926T > + select ARM_AMBA > > config SOC_IMX28 > bool > select CPU_ARM926T > + select ARM_AMBA Maybe let MXS_HAVE_AMBA_DUART let select ARM_AMBA? > comment "MXS platforms:" > > config MACH_MX23EVK > bool "Support MX23EVK Platform" > select SOC_IMX23 > - select MXS_HAVE_PLATFORM_DUART > + select MXS_HAVE_AMBA_DUART > default y > help > Include support for MX23EVK platform. This includes specific > @@ -24,7 +26,7 @@ config MACH_MX23EVK > config MACH_MX28EVK > bool "Support MX28EVK Platform" > select SOC_IMX28 > - select MXS_HAVE_PLATFORM_DUART > + select MXS_HAVE_AMBA_DUART > select MXS_HAVE_PLATFORM_FEC > default y > help > diff --git a/arch/arm/mach-mxs/clock-mx23.c b/arch/arm/mach-mxs/clock-mx23.c > index 8f5a19a..0f65d15 100644 > --- a/arch/arm/mach-mxs/clock-mx23.c > +++ b/arch/arm/mach-mxs/clock-mx23.c > @@ -437,7 +437,7 @@ _DEFINE_CLOCK(clk32k_clk, XTAL, TIMROT_CLK32K_GATE, &ref_xtal_clk); > }, > > static struct clk_lookup lookups[] = { > - _REGISTER_CLOCK("mxs-duart.0", NULL, uart_clk) > + _REGISTER_CLOCK("uart", NULL, uart_clk) hmm, I still don't like that. What do you think about having an alias for uart_clk that is named "duart" or similar? > _REGISTER_CLOCK("rtc", NULL, rtc_clk) > _REGISTER_CLOCK(NULL, "hclk", hbus_clk) > _REGISTER_CLOCK(NULL, "xclk", xbus_clk) > diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c > index 74e2103..dd6d158 100644 > --- a/arch/arm/mach-mxs/clock-mx28.c > +++ b/arch/arm/mach-mxs/clock-mx28.c > @@ -602,7 +602,7 @@ _DEFINE_CLOCK(fec_clk, ENET, DISABLE, &hbus_clk); > }, > > static struct clk_lookup lookups[] = { > - _REGISTER_CLOCK("mxs-duart.0", NULL, uart_clk) > + _REGISTER_CLOCK("uart", NULL, uart_clk) > _REGISTER_CLOCK("fec.0", NULL, fec_clk) > _REGISTER_CLOCK("rtc", NULL, rtc_clk) > _REGISTER_CLOCK("pll2", NULL, pll2_clk) > diff --git a/arch/arm/mach-mxs/devices-mx23.h b/arch/arm/mach-mxs/devices-mx23.h > index d0f49fc..36397ff 100644 > --- a/arch/arm/mach-mxs/devices-mx23.h > +++ b/arch/arm/mach-mxs/devices-mx23.h > @@ -11,6 +11,6 @@ > #include <mach/mx23.h> > #include <mach/devices-common.h> > > -extern const struct mxs_duart_data mx23_duart_data __initconst; > +extern struct amba_device mx23_duart_device; > #define mx23_add_duart() \ > - mxs_add_duart(&mx23_duart_data) > + mxs_add_duart(&mx23_duart_device) > diff --git a/arch/arm/mach-mxs/devices-mx28.h b/arch/arm/mach-mxs/devices-mx28.h > index 00b736c..e84a7fe 100644 > --- a/arch/arm/mach-mxs/devices-mx28.h > +++ b/arch/arm/mach-mxs/devices-mx28.h > @@ -11,9 +11,9 @@ > #include <mach/mx28.h> > #include <mach/devices-common.h> > > -extern const struct mxs_duart_data mx28_duart_data __initconst; > +extern struct amba_device mx28_duart_device; > #define mx28_add_duart() \ > - mxs_add_duart(&mx28_duart_data) > + mxs_add_duart(&mx28_duart_device) > > extern const struct mxs_fec_data mx28_fec_data[] __initconst; > #define mx28_add_fec(id, pdata) \ > diff --git a/arch/arm/mach-mxs/devices/Kconfig b/arch/arm/mach-mxs/devices/Kconfig > index a35a2dc..3dff25c 100644 > --- a/arch/arm/mach-mxs/devices/Kconfig > +++ b/arch/arm/mach-mxs/devices/Kconfig > @@ -1,4 +1,4 @@ > -config MXS_HAVE_PLATFORM_DUART > +config MXS_HAVE_AMBA_DUART > bool > > config MXS_HAVE_PLATFORM_FEC > diff --git a/arch/arm/mach-mxs/devices/Makefile b/arch/arm/mach-mxs/devices/Makefile > index 4b5266a..d0a09f6 100644 > --- a/arch/arm/mach-mxs/devices/Makefile > +++ b/arch/arm/mach-mxs/devices/Makefile > @@ -1,2 +1,2 @@ > -obj-$(CONFIG_MXS_HAVE_PLATFORM_DUART) += platform-duart.o > +obj-$(CONFIG_MXS_HAVE_AMBA_DUART) += amba-duart.o > obj-$(CONFIG_MXS_HAVE_PLATFORM_FEC) += platform-fec.o > diff --git a/arch/arm/mach-mxs/devices/amba-duart.c b/arch/arm/mach-mxs/devices/amba-duart.c > new file mode 100644 > index 0000000..aa77d28 > --- /dev/null > +++ b/arch/arm/mach-mxs/devices/amba-duart.c > @@ -0,0 +1,40 @@ > +/* > + * Copyright (C) 2009-2010 Pengutronix > + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> > + * > + * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved. > + * > + * This program is free software; you can redistribute it and/or modify it under > + * the terms of the GNU General Public License version 2 as published by the > + * Free Software Foundation. > + */ > +#include <asm/irq.h> > +#include <mach/mx23.h> > +#include <mach/mx28.h> > +#include <mach/devices-common.h> > + > +#define MXS_AMBA_DUART_DEVICE(name, soc) \ > +struct amba_device name##_device = { \ > + .dev = { \ > + .init_name = "uart", \ > + }, \ > + .res = { \ > + .start = soc ## _DUART_BASE_ADDR, \ > + .end = (soc ## _DUART_BASE_ADDR) + SZ_8K - 1, \ > + .flags = IORESOURCE_MEM, \ > + }, \ > + .irq = {soc ## _INT_DUART, NO_IRQ}, \ > +} > + > +#ifdef CONFIG_SOC_IMX23 > +MXS_AMBA_DUART_DEVICE(mx23_duart, MX23); > +#endif > + > +#ifdef CONFIG_SOC_IMX28 > +MXS_AMBA_DUART_DEVICE(mx28_duart, MX28); > +#endif > + > +int __init mxs_add_duart(struct amba_device *dev) > +{ > + return amba_device_register(dev, &iomem_resource); > +} This doesn't have the benefits of the construct for platform devices. (i.e. mx23_duart_device isn't marked with __initdata (or __initconst) and so occupies memory even when the kernel runs on an i.MX28.) At least making it __initconst and then do struct amba_device *adev = kmalloc(sizeof(*adev)); *adev = *dev return amba_device_register(adev, ...); (plus some error checking) would be nice. Maybe put that into a wrapper similar to mxs_add_platform_device? I didn't check the size of a struct ambadevice, so I cannot tell if it's worth to create an extra struct to just carry the relevant data. Best regards Uwe > diff --git a/arch/arm/mach-mxs/devices/platform-duart.c b/arch/arm/mach-mxs/devices/platform-duart.c > deleted file mode 100644 > index 2fe0df5..0000000 > --- a/arch/arm/mach-mxs/devices/platform-duart.c > +++ /dev/null > @@ -1,48 +0,0 @@ > -/* > - * Copyright (C) 2009-2010 Pengutronix > - * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> > - * > - * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved. > - * > - * This program is free software; you can redistribute it and/or modify it under > - * the terms of the GNU General Public License version 2 as published by the > - * Free Software Foundation. > - */ > -#include <mach/mx23.h> > -#include <mach/mx28.h> > -#include <mach/devices-common.h> > - > -#define mxs_duart_data_entry(soc) \ > - { \ > - .iobase = soc ## _DUART_BASE_ADDR, \ > - .irq = soc ## _INT_DUART, \ > - } > - > -#ifdef CONFIG_SOC_IMX23 > -const struct mxs_duart_data mx23_duart_data __initconst = > - mxs_duart_data_entry(MX23); > -#endif > - > -#ifdef CONFIG_SOC_IMX28 > -const struct mxs_duart_data mx28_duart_data __initconst = > - mxs_duart_data_entry(MX28); > -#endif > - > -struct platform_device *__init mxs_add_duart( > - const struct mxs_duart_data *data) > -{ > - struct resource res[] = { > - { > - .start = data->iobase, > - .end = data->iobase + SZ_8K - 1, > - .flags = IORESOURCE_MEM, > - }, { > - .start = data->irq, > - .end = data->irq, > - .flags = IORESOURCE_IRQ, > - }, > - }; > - > - return mxs_add_platform_device("mxs-duart", 0, res, ARRAY_SIZE(res), > - NULL, 0); > -} > diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h > index 3da48d4..fca0551 100644 > --- a/arch/arm/mach-mxs/include/mach/devices-common.h > +++ b/arch/arm/mach-mxs/include/mach/devices-common.h > @@ -9,6 +9,7 @@ > #include <linux/kernel.h> > #include <linux/platform_device.h> > #include <linux/init.h> > +#include <linux/amba/bus.h> > > struct platform_device *mxs_add_platform_device_dmamask( > const char *name, int id, > @@ -25,13 +26,7 @@ static inline struct platform_device *mxs_add_platform_device( > } > > /* duart */ > -struct mxs_duart_data { > - resource_size_t iobase; > - resource_size_t iosize; > - resource_size_t irq; > -}; > -struct platform_device *__init mxs_add_duart( > - const struct mxs_duart_data *data); > +int __init mxs_add_duart(struct amba_device *dev); > > /* fec */ > #include <linux/fec.h> -- Pengutronix e.K. | Uwe Kleine-K?nig | Industrial Linux Solutions | http://www.pengutronix.de/ | ^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH v2] ARM: mxs: Change duart device to use amba-pl011 2010-12-29 9:12 ` Uwe Kleine-König @ 2010-12-31 5:16 ` Shawn Guo 0 siblings, 0 replies; 23+ messages in thread From: Shawn Guo @ 2010-12-31 5:16 UTC (permalink / raw) To: linux-arm-kernel Hi Uwe, On Wed, Dec 29, 2010 at 10:12:47AM +0100, Uwe Kleine-K?nig wrote: > Hello Shawn, > > just a few thought that came to my mind when reading your patch ... > > On Tue, Dec 28, 2010 at 11:23:14PM +0800, Shawn Guo wrote: > > The mxs duart is actually an amba-pl011 device. This commit changes > > the duart device code to dynamically allocate amba-pl011 device, > > so that drivers/serial/amba-pl011.c can be used on mxs. > > > > Signed-off-by: Shawn Guo <shawn.guo@freescale.com> > > --- > > Changes for v2: > > - Add #include <asm/irq.h> into amba-duart.c. When cleaning headers > > includsion in other files, compiler start complaining NO_IRQ not > > defined, so add the inclusion to fix it. > > - Change MXS_AMBA_DEVICE to MXS_AMBA_DUART_DEVICE > > > > arch/arm/mach-mxs/Kconfig | 6 ++- > > arch/arm/mach-mxs/clock-mx23.c | 2 +- > > arch/arm/mach-mxs/clock-mx28.c | 2 +- > > arch/arm/mach-mxs/devices-mx23.h | 4 +- > > arch/arm/mach-mxs/devices-mx28.h | 4 +- > > arch/arm/mach-mxs/devices/Kconfig | 2 +- > > arch/arm/mach-mxs/devices/Makefile | 2 +- > > arch/arm/mach-mxs/devices/amba-duart.c | 40 +++++++++++++++++++ > > arch/arm/mach-mxs/devices/platform-duart.c | 48 ----------------------- > > arch/arm/mach-mxs/include/mach/devices-common.h | 9 +--- > > 10 files changed, 54 insertions(+), 65 deletions(-) > > create mode 100644 arch/arm/mach-mxs/devices/amba-duart.c > > delete mode 100644 arch/arm/mach-mxs/devices/platform-duart.c > > > > diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig > > index c4ac7b4..0d072e9 100644 > > --- a/arch/arm/mach-mxs/Kconfig > > +++ b/arch/arm/mach-mxs/Kconfig > > @@ -5,17 +5,19 @@ source "arch/arm/mach-mxs/devices/Kconfig" > > config SOC_IMX23 > > bool > > select CPU_ARM926T > > + select ARM_AMBA > > > > config SOC_IMX28 > > bool > > select CPU_ARM926T > > + select ARM_AMBA > Maybe let MXS_HAVE_AMBA_DUART let select ARM_AMBA? > OK. > > comment "MXS platforms:" > > > > config MACH_MX23EVK > > bool "Support MX23EVK Platform" > > select SOC_IMX23 > > - select MXS_HAVE_PLATFORM_DUART > > + select MXS_HAVE_AMBA_DUART > > default y > > help > > Include support for MX23EVK platform. This includes specific > > @@ -24,7 +26,7 @@ config MACH_MX23EVK > > config MACH_MX28EVK > > bool "Support MX28EVK Platform" > > select SOC_IMX28 > > - select MXS_HAVE_PLATFORM_DUART > > + select MXS_HAVE_AMBA_DUART > > select MXS_HAVE_PLATFORM_FEC > > default y > > help > > diff --git a/arch/arm/mach-mxs/clock-mx23.c b/arch/arm/mach-mxs/clock-mx23.c > > index 8f5a19a..0f65d15 100644 > > --- a/arch/arm/mach-mxs/clock-mx23.c > > +++ b/arch/arm/mach-mxs/clock-mx23.c > > @@ -437,7 +437,7 @@ _DEFINE_CLOCK(clk32k_clk, XTAL, TIMROT_CLK32K_GATE, &ref_xtal_clk); > > }, > > > > static struct clk_lookup lookups[] = { > > - _REGISTER_CLOCK("mxs-duart.0", NULL, uart_clk) > > + _REGISTER_CLOCK("uart", NULL, uart_clk) > hmm, I still don't like that. What do you think about having an alias > for uart_clk that is named "duart" or similar? > So you are expecting something below, when application uart comes in? I'm okay with it. _REGISTER_CLOCK("duart", NULL, uart_clk) _REGISTER_CLOCK("auart", NULL, uart_clk) > > _REGISTER_CLOCK("rtc", NULL, rtc_clk) > > _REGISTER_CLOCK(NULL, "hclk", hbus_clk) > > _REGISTER_CLOCK(NULL, "xclk", xbus_clk) > > diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c > > index 74e2103..dd6d158 100644 > > --- a/arch/arm/mach-mxs/clock-mx28.c > > +++ b/arch/arm/mach-mxs/clock-mx28.c > > @@ -602,7 +602,7 @@ _DEFINE_CLOCK(fec_clk, ENET, DISABLE, &hbus_clk); > > }, > > > > static struct clk_lookup lookups[] = { > > - _REGISTER_CLOCK("mxs-duart.0", NULL, uart_clk) > > + _REGISTER_CLOCK("uart", NULL, uart_clk) > > _REGISTER_CLOCK("fec.0", NULL, fec_clk) > > _REGISTER_CLOCK("rtc", NULL, rtc_clk) > > _REGISTER_CLOCK("pll2", NULL, pll2_clk) > > diff --git a/arch/arm/mach-mxs/devices-mx23.h b/arch/arm/mach-mxs/devices-mx23.h > > index d0f49fc..36397ff 100644 > > --- a/arch/arm/mach-mxs/devices-mx23.h > > +++ b/arch/arm/mach-mxs/devices-mx23.h > > @@ -11,6 +11,6 @@ > > #include <mach/mx23.h> > > #include <mach/devices-common.h> > > > > -extern const struct mxs_duart_data mx23_duart_data __initconst; > > +extern struct amba_device mx23_duart_device; > > #define mx23_add_duart() \ > > - mxs_add_duart(&mx23_duart_data) > > + mxs_add_duart(&mx23_duart_device) > > diff --git a/arch/arm/mach-mxs/devices-mx28.h b/arch/arm/mach-mxs/devices-mx28.h > > index 00b736c..e84a7fe 100644 > > --- a/arch/arm/mach-mxs/devices-mx28.h > > +++ b/arch/arm/mach-mxs/devices-mx28.h > > @@ -11,9 +11,9 @@ > > #include <mach/mx28.h> > > #include <mach/devices-common.h> > > > > -extern const struct mxs_duart_data mx28_duart_data __initconst; > > +extern struct amba_device mx28_duart_device; > > #define mx28_add_duart() \ > > - mxs_add_duart(&mx28_duart_data) > > + mxs_add_duart(&mx28_duart_device) > > > > extern const struct mxs_fec_data mx28_fec_data[] __initconst; > > #define mx28_add_fec(id, pdata) \ > > diff --git a/arch/arm/mach-mxs/devices/Kconfig b/arch/arm/mach-mxs/devices/Kconfig > > index a35a2dc..3dff25c 100644 > > --- a/arch/arm/mach-mxs/devices/Kconfig > > +++ b/arch/arm/mach-mxs/devices/Kconfig > > @@ -1,4 +1,4 @@ > > -config MXS_HAVE_PLATFORM_DUART > > +config MXS_HAVE_AMBA_DUART > > bool > > > > config MXS_HAVE_PLATFORM_FEC > > diff --git a/arch/arm/mach-mxs/devices/Makefile b/arch/arm/mach-mxs/devices/Makefile > > index 4b5266a..d0a09f6 100644 > > --- a/arch/arm/mach-mxs/devices/Makefile > > +++ b/arch/arm/mach-mxs/devices/Makefile > > @@ -1,2 +1,2 @@ > > -obj-$(CONFIG_MXS_HAVE_PLATFORM_DUART) += platform-duart.o > > +obj-$(CONFIG_MXS_HAVE_AMBA_DUART) += amba-duart.o > > obj-$(CONFIG_MXS_HAVE_PLATFORM_FEC) += platform-fec.o > > diff --git a/arch/arm/mach-mxs/devices/amba-duart.c b/arch/arm/mach-mxs/devices/amba-duart.c > > new file mode 100644 > > index 0000000..aa77d28 > > --- /dev/null > > +++ b/arch/arm/mach-mxs/devices/amba-duart.c > > @@ -0,0 +1,40 @@ > > +/* > > + * Copyright (C) 2009-2010 Pengutronix > > + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> > > + * > > + * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved. > > + * > > + * This program is free software; you can redistribute it and/or modify it under > > + * the terms of the GNU General Public License version 2 as published by the > > + * Free Software Foundation. > > + */ > > +#include <asm/irq.h> > > +#include <mach/mx23.h> > > +#include <mach/mx28.h> > > +#include <mach/devices-common.h> > > + > > +#define MXS_AMBA_DUART_DEVICE(name, soc) \ > > +struct amba_device name##_device = { \ > > + .dev = { \ > > + .init_name = "uart", \ > > + }, \ > > + .res = { \ > > + .start = soc ## _DUART_BASE_ADDR, \ > > + .end = (soc ## _DUART_BASE_ADDR) + SZ_8K - 1, \ > > + .flags = IORESOURCE_MEM, \ > > + }, \ > > + .irq = {soc ## _INT_DUART, NO_IRQ}, \ > > +} > > + > > +#ifdef CONFIG_SOC_IMX23 > > +MXS_AMBA_DUART_DEVICE(mx23_duart, MX23); > > +#endif > > + > > +#ifdef CONFIG_SOC_IMX28 > > +MXS_AMBA_DUART_DEVICE(mx28_duart, MX28); > > +#endif > > + > > +int __init mxs_add_duart(struct amba_device *dev) > > +{ > > + return amba_device_register(dev, &iomem_resource); > > +} > This doesn't have the benefits of the construct for platform devices. > (i.e. mx23_duart_device isn't marked with __initdata (or __initconst) > and so occupies memory even when the kernel runs on an i.MX28.) > At least making it __initconst and then do > > struct amba_device *adev = kmalloc(sizeof(*adev)); > *adev = *dev > return amba_device_register(adev, ...); > > (plus some error checking) would be nice. Maybe put that into a wrapper > similar to mxs_add_platform_device? I didn't check the size of a struct OK. Will address it in v3 coming soon. > ambadevice, so I cannot tell if it's worth to create an extra struct to > just carry the relevant data. > -- Regards, Shawn ^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH v3] ARM: mxs: Change duart device to use amba-pl011 2010-12-20 14:57 [PATCH v8 00/15] ARM: mxs: Add initial support for MX23 and MX28 Shawn Guo ` (5 preceding siblings ...) 2010-12-28 15:23 ` [PATCH v2] " Shawn Guo @ 2010-12-31 5:50 ` Shawn Guo 2011-01-04 6:20 ` [PATCH v4] " Shawn Guo 7 siblings, 0 replies; 23+ messages in thread From: Shawn Guo @ 2010-12-31 5:50 UTC (permalink / raw) To: linux-arm-kernel The mxs duart is actually an amba-pl011 device. This commit changes the duart device code to dynamically allocate amba-pl011 device, so that drivers/serial/amba-pl011.c can be used on mxs. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> --- Changes for v3: - Use alias "duart" of uart_clk for duart serial driver - Add __initconst for duart amba_device - Let MXS_HAVE_AMBA_DUART select ARM_AMBA Changes for v2: - Add #include <asm/irq.h> into amba-duart.c. When cleaning headers includsion in other files, compiler start complaining NO_IRQ not defined, so add the inclusion to fix it. - Change MXS_AMBA_DEVICE to MXS_AMBA_DUART_DEVICE arch/arm/mach-mxs/Kconfig | 4 +- arch/arm/mach-mxs/clock-mx23.c | 2 +- arch/arm/mach-mxs/clock-mx28.c | 2 +- arch/arm/mach-mxs/devices-mx23.h | 4 +- arch/arm/mach-mxs/devices-mx28.h | 4 +- arch/arm/mach-mxs/devices.c | 17 +++++++- arch/arm/mach-mxs/devices/Kconfig | 3 +- arch/arm/mach-mxs/devices/Makefile | 2 +- arch/arm/mach-mxs/devices/amba-duart.c | 40 +++++++++++++++++++ arch/arm/mach-mxs/devices/platform-duart.c | 48 ----------------------- arch/arm/mach-mxs/include/mach/devices-common.h | 11 ++--- 11 files changed, 70 insertions(+), 67 deletions(-) create mode 100644 arch/arm/mach-mxs/devices/amba-duart.c delete mode 100644 arch/arm/mach-mxs/devices/platform-duart.c diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index c4ac7b4..8bfc8df 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -15,7 +15,7 @@ comment "MXS platforms:" config MACH_MX23EVK bool "Support MX23EVK Platform" select SOC_IMX23 - select MXS_HAVE_PLATFORM_DUART + select MXS_HAVE_AMBA_DUART default y help Include support for MX23EVK platform. This includes specific @@ -24,7 +24,7 @@ config MACH_MX23EVK config MACH_MX28EVK bool "Support MX28EVK Platform" select SOC_IMX28 - select MXS_HAVE_PLATFORM_DUART + select MXS_HAVE_AMBA_DUART select MXS_HAVE_PLATFORM_FEC default y help diff --git a/arch/arm/mach-mxs/clock-mx23.c b/arch/arm/mach-mxs/clock-mx23.c index 8f5a19a..d6b6fee 100644 --- a/arch/arm/mach-mxs/clock-mx23.c +++ b/arch/arm/mach-mxs/clock-mx23.c @@ -437,7 +437,7 @@ _DEFINE_CLOCK(clk32k_clk, XTAL, TIMROT_CLK32K_GATE, &ref_xtal_clk); }, static struct clk_lookup lookups[] = { - _REGISTER_CLOCK("mxs-duart.0", NULL, uart_clk) + _REGISTER_CLOCK("duart", NULL, uart_clk) _REGISTER_CLOCK("rtc", NULL, rtc_clk) _REGISTER_CLOCK(NULL, "hclk", hbus_clk) _REGISTER_CLOCK(NULL, "xclk", xbus_clk) diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c index 74e2103..9e836e9 100644 --- a/arch/arm/mach-mxs/clock-mx28.c +++ b/arch/arm/mach-mxs/clock-mx28.c @@ -602,7 +602,7 @@ _DEFINE_CLOCK(fec_clk, ENET, DISABLE, &hbus_clk); }, static struct clk_lookup lookups[] = { - _REGISTER_CLOCK("mxs-duart.0", NULL, uart_clk) + _REGISTER_CLOCK("duart", NULL, uart_clk) _REGISTER_CLOCK("fec.0", NULL, fec_clk) _REGISTER_CLOCK("rtc", NULL, rtc_clk) _REGISTER_CLOCK("pll2", NULL, pll2_clk) diff --git a/arch/arm/mach-mxs/devices-mx23.h b/arch/arm/mach-mxs/devices-mx23.h index d0f49fc..1256788 100644 --- a/arch/arm/mach-mxs/devices-mx23.h +++ b/arch/arm/mach-mxs/devices-mx23.h @@ -11,6 +11,6 @@ #include <mach/mx23.h> #include <mach/devices-common.h> -extern const struct mxs_duart_data mx23_duart_data __initconst; +extern const struct amba_device mx23_duart_device __initconst; #define mx23_add_duart() \ - mxs_add_duart(&mx23_duart_data) + mxs_add_duart(&mx23_duart_device) diff --git a/arch/arm/mach-mxs/devices-mx28.h b/arch/arm/mach-mxs/devices-mx28.h index 00b736c..33773a6 100644 --- a/arch/arm/mach-mxs/devices-mx28.h +++ b/arch/arm/mach-mxs/devices-mx28.h @@ -11,9 +11,9 @@ #include <mach/mx28.h> #include <mach/devices-common.h> -extern const struct mxs_duart_data mx28_duart_data __initconst; +extern const struct amba_device mx28_duart_device __initconst; #define mx28_add_duart() \ - mxs_add_duart(&mx28_duart_data) + mxs_add_duart(&mx28_duart_device) extern const struct mxs_fec_data mx28_fec_data[] __initconst; #define mx28_add_fec(id, pdata) \ diff --git a/arch/arm/mach-mxs/devices.c b/arch/arm/mach-mxs/devices.c index 6b60f02..c20d547 100644 --- a/arch/arm/mach-mxs/devices.c +++ b/arch/arm/mach-mxs/devices.c @@ -19,9 +19,8 @@ #include <linux/kernel.h> #include <linux/slab.h> #include <linux/init.h> -#include <linux/err.h> #include <linux/platform_device.h> -#include <mach/common.h> +#include <linux/amba/bus.h> struct platform_device *__init mxs_add_platform_device_dmamask( const char *name, int id, @@ -73,3 +72,17 @@ err: return pdev; } + +int __init mxs_add_amba_device(const struct amba_device *dev) +{ + struct amba_device *adev = kmalloc(sizeof(*adev), GFP_KERNEL); + + if (!adev) { + pr_err("%s: failed to allocate memory", __func__); + return -ENOMEM; + } + + *adev = *dev; + + return amba_device_register(adev, &iomem_resource); +} diff --git a/arch/arm/mach-mxs/devices/Kconfig b/arch/arm/mach-mxs/devices/Kconfig index a35a2dc..cf7dc1a 100644 --- a/arch/arm/mach-mxs/devices/Kconfig +++ b/arch/arm/mach-mxs/devices/Kconfig @@ -1,5 +1,6 @@ -config MXS_HAVE_PLATFORM_DUART +config MXS_HAVE_AMBA_DUART bool + select ARM_AMBA config MXS_HAVE_PLATFORM_FEC bool diff --git a/arch/arm/mach-mxs/devices/Makefile b/arch/arm/mach-mxs/devices/Makefile index 4b5266a..d0a09f6 100644 --- a/arch/arm/mach-mxs/devices/Makefile +++ b/arch/arm/mach-mxs/devices/Makefile @@ -1,2 +1,2 @@ -obj-$(CONFIG_MXS_HAVE_PLATFORM_DUART) += platform-duart.o +obj-$(CONFIG_MXS_HAVE_AMBA_DUART) += amba-duart.o obj-$(CONFIG_MXS_HAVE_PLATFORM_FEC) += platform-fec.o diff --git a/arch/arm/mach-mxs/devices/amba-duart.c b/arch/arm/mach-mxs/devices/amba-duart.c new file mode 100644 index 0000000..a559db0 --- /dev/null +++ b/arch/arm/mach-mxs/devices/amba-duart.c @@ -0,0 +1,40 @@ +/* + * Copyright (C) 2009-2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <asm/irq.h> +#include <mach/mx23.h> +#include <mach/mx28.h> +#include <mach/devices-common.h> + +#define MXS_AMBA_DUART_DEVICE(name, soc) \ +const struct amba_device name##_device __initconst = { \ + .dev = { \ + .init_name = "duart", \ + }, \ + .res = { \ + .start = soc ## _DUART_BASE_ADDR, \ + .end = (soc ## _DUART_BASE_ADDR) + SZ_8K - 1, \ + .flags = IORESOURCE_MEM, \ + }, \ + .irq = {soc ## _INT_DUART, NO_IRQ}, \ +} + +#ifdef CONFIG_SOC_IMX23 +MXS_AMBA_DUART_DEVICE(mx23_duart, MX23); +#endif + +#ifdef CONFIG_SOC_IMX28 +MXS_AMBA_DUART_DEVICE(mx28_duart, MX28); +#endif + +int __init mxs_add_duart(const struct amba_device *dev) +{ + return mxs_add_amba_device(dev); +} diff --git a/arch/arm/mach-mxs/devices/platform-duart.c b/arch/arm/mach-mxs/devices/platform-duart.c deleted file mode 100644 index 2fe0df5..0000000 --- a/arch/arm/mach-mxs/devices/platform-duart.c +++ /dev/null @@ -1,48 +0,0 @@ -/* - * Copyright (C) 2009-2010 Pengutronix - * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - * - * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. - */ -#include <mach/mx23.h> -#include <mach/mx28.h> -#include <mach/devices-common.h> - -#define mxs_duart_data_entry(soc) \ - { \ - .iobase = soc ## _DUART_BASE_ADDR, \ - .irq = soc ## _INT_DUART, \ - } - -#ifdef CONFIG_SOC_IMX23 -const struct mxs_duart_data mx23_duart_data __initconst = - mxs_duart_data_entry(MX23); -#endif - -#ifdef CONFIG_SOC_IMX28 -const struct mxs_duart_data mx28_duart_data __initconst = - mxs_duart_data_entry(MX28); -#endif - -struct platform_device *__init mxs_add_duart( - const struct mxs_duart_data *data) -{ - struct resource res[] = { - { - .start = data->iobase, - .end = data->iobase + SZ_8K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = data->irq, - .end = data->irq, - .flags = IORESOURCE_IRQ, - }, - }; - - return mxs_add_platform_device("mxs-duart", 0, res, ARRAY_SIZE(res), - NULL, 0); -} diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h index 3da48d4..6c3d1a1 100644 --- a/arch/arm/mach-mxs/include/mach/devices-common.h +++ b/arch/arm/mach-mxs/include/mach/devices-common.h @@ -9,6 +9,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/init.h> +#include <linux/amba/bus.h> struct platform_device *mxs_add_platform_device_dmamask( const char *name, int id, @@ -24,14 +25,10 @@ static inline struct platform_device *mxs_add_platform_device( name, id, res, num_resources, data, size_data, 0); } +int __init mxs_add_amba_device(const struct amba_device *dev); + /* duart */ -struct mxs_duart_data { - resource_size_t iobase; - resource_size_t iosize; - resource_size_t irq; -}; -struct platform_device *__init mxs_add_duart( - const struct mxs_duart_data *data); +int __init mxs_add_duart(const struct amba_device *dev); /* fec */ #include <linux/fec.h> -- 1.7.1 ^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH v4] ARM: mxs: Change duart device to use amba-pl011 2010-12-20 14:57 [PATCH v8 00/15] ARM: mxs: Add initial support for MX23 and MX28 Shawn Guo ` (6 preceding siblings ...) 2010-12-31 5:50 ` [PATCH v3] " Shawn Guo @ 2011-01-04 6:20 ` Shawn Guo 2011-01-10 13:34 ` Wolfram Sang 7 siblings, 1 reply; 23+ messages in thread From: Shawn Guo @ 2011-01-04 6:20 UTC (permalink / raw) To: linux-arm-kernel The mxs duart is actually an amba-pl011 device. This commit changes the duart device code to dynamically allocate amba-pl011 device, so that drivers/serial/amba-pl011.c can be used on mxs. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> --- Changes for v4: - Register xbus_clk for amba bus driver to get, in form of dev_id="duart" and con_id="apb_pclk" - Explicitly call clk_enable for some fundamental clocks that have been on, to reflect the clock status and get its and parent's usecount updated. Changes for v3: - Use alias "duart" of uart_clk for duart serial driver - Add __initconst for duart amba_device - Let MXS_HAVE_AMBA_DUART select ARM_AMBA Changes for v2: - Add #include <asm/irq.h> into amba-duart.c. When cleaning headers includsion in other files, compiler start complaining NO_IRQ not defined, so add the inclusion to fix it. - Change MXS_AMBA_DEVICE to MXS_AMBA_DUART_DEVICE arch/arm/mach-mxs/Kconfig | 4 +- arch/arm/mach-mxs/clock-mx23.c | 12 +++++- arch/arm/mach-mxs/clock-mx28.c | 12 +++++- arch/arm/mach-mxs/devices-mx23.h | 4 +- arch/arm/mach-mxs/devices-mx28.h | 4 +- arch/arm/mach-mxs/devices.c | 17 +++++++- arch/arm/mach-mxs/devices/Kconfig | 3 +- arch/arm/mach-mxs/devices/Makefile | 2 +- arch/arm/mach-mxs/devices/amba-duart.c | 40 +++++++++++++++++++ arch/arm/mach-mxs/devices/platform-duart.c | 48 ----------------------- arch/arm/mach-mxs/include/mach/devices-common.h | 11 ++--- 11 files changed, 88 insertions(+), 69 deletions(-) create mode 100644 arch/arm/mach-mxs/devices/amba-duart.c delete mode 100644 arch/arm/mach-mxs/devices/platform-duart.c diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index c4ac7b4..8bfc8df 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -15,7 +15,7 @@ comment "MXS platforms:" config MACH_MX23EVK bool "Support MX23EVK Platform" select SOC_IMX23 - select MXS_HAVE_PLATFORM_DUART + select MXS_HAVE_AMBA_DUART default y help Include support for MX23EVK platform. This includes specific @@ -24,7 +24,7 @@ config MACH_MX23EVK config MACH_MX28EVK bool "Support MX28EVK Platform" select SOC_IMX28 - select MXS_HAVE_PLATFORM_DUART + select MXS_HAVE_AMBA_DUART select MXS_HAVE_PLATFORM_FEC default y help diff --git a/arch/arm/mach-mxs/clock-mx23.c b/arch/arm/mach-mxs/clock-mx23.c index 8f5a19a..136341d 100644 --- a/arch/arm/mach-mxs/clock-mx23.c +++ b/arch/arm/mach-mxs/clock-mx23.c @@ -437,10 +437,12 @@ _DEFINE_CLOCK(clk32k_clk, XTAL, TIMROT_CLK32K_GATE, &ref_xtal_clk); }, static struct clk_lookup lookups[] = { - _REGISTER_CLOCK("mxs-duart.0", NULL, uart_clk) + /* for amba bus driver */ + _REGISTER_CLOCK("duart", "apb_pclk", xbus_clk) + /* for amba-pl011 driver */ + _REGISTER_CLOCK("duart", NULL, uart_clk) _REGISTER_CLOCK("rtc", NULL, rtc_clk) _REGISTER_CLOCK(NULL, "hclk", hbus_clk) - _REGISTER_CLOCK(NULL, "xclk", xbus_clk) _REGISTER_CLOCK(NULL, "usb", usb_clk) _REGISTER_CLOCK(NULL, "audio", audio_clk) _REGISTER_CLOCK(NULL, "pwm", pwm_clk) @@ -518,6 +520,12 @@ int __init mx23_clocks_init(void) { clk_misc_init(); + clk_enable(&cpu_clk); + clk_enable(&hbus_clk); + clk_enable(&xbus_clk); + clk_enable(&emi_clk); + clk_enable(&uart_clk); + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); mxs_timer_init(&clk32k_clk, MX23_INT_TIMER0); diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c index 74e2103..f20b254 100644 --- a/arch/arm/mach-mxs/clock-mx28.c +++ b/arch/arm/mach-mxs/clock-mx28.c @@ -602,12 +602,14 @@ _DEFINE_CLOCK(fec_clk, ENET, DISABLE, &hbus_clk); }, static struct clk_lookup lookups[] = { - _REGISTER_CLOCK("mxs-duart.0", NULL, uart_clk) + /* for amba bus driver */ + _REGISTER_CLOCK("duart", "apb_pclk", xbus_clk) + /* for amba-pl011 driver */ + _REGISTER_CLOCK("duart", NULL, uart_clk) _REGISTER_CLOCK("fec.0", NULL, fec_clk) _REGISTER_CLOCK("rtc", NULL, rtc_clk) _REGISTER_CLOCK("pll2", NULL, pll2_clk) _REGISTER_CLOCK(NULL, "hclk", hbus_clk) - _REGISTER_CLOCK(NULL, "xclk", xbus_clk) _REGISTER_CLOCK(NULL, "can0", can0_clk) _REGISTER_CLOCK(NULL, "can1", can1_clk) _REGISTER_CLOCK(NULL, "usb0", usb0_clk) @@ -726,6 +728,12 @@ int __init mx28_clocks_init(void) { clk_misc_init(); + clk_enable(&cpu_clk); + clk_enable(&hbus_clk); + clk_enable(&xbus_clk); + clk_enable(&emi_clk); + clk_enable(&uart_clk); + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); mxs_timer_init(&clk32k_clk, MX28_INT_TIMER0); diff --git a/arch/arm/mach-mxs/devices-mx23.h b/arch/arm/mach-mxs/devices-mx23.h index d0f49fc..1256788 100644 --- a/arch/arm/mach-mxs/devices-mx23.h +++ b/arch/arm/mach-mxs/devices-mx23.h @@ -11,6 +11,6 @@ #include <mach/mx23.h> #include <mach/devices-common.h> -extern const struct mxs_duart_data mx23_duart_data __initconst; +extern const struct amba_device mx23_duart_device __initconst; #define mx23_add_duart() \ - mxs_add_duart(&mx23_duart_data) + mxs_add_duart(&mx23_duart_device) diff --git a/arch/arm/mach-mxs/devices-mx28.h b/arch/arm/mach-mxs/devices-mx28.h index 00b736c..33773a6 100644 --- a/arch/arm/mach-mxs/devices-mx28.h +++ b/arch/arm/mach-mxs/devices-mx28.h @@ -11,9 +11,9 @@ #include <mach/mx28.h> #include <mach/devices-common.h> -extern const struct mxs_duart_data mx28_duart_data __initconst; +extern const struct amba_device mx28_duart_device __initconst; #define mx28_add_duart() \ - mxs_add_duart(&mx28_duart_data) + mxs_add_duart(&mx28_duart_device) extern const struct mxs_fec_data mx28_fec_data[] __initconst; #define mx28_add_fec(id, pdata) \ diff --git a/arch/arm/mach-mxs/devices.c b/arch/arm/mach-mxs/devices.c index 6b60f02..c20d547 100644 --- a/arch/arm/mach-mxs/devices.c +++ b/arch/arm/mach-mxs/devices.c @@ -19,9 +19,8 @@ #include <linux/kernel.h> #include <linux/slab.h> #include <linux/init.h> -#include <linux/err.h> #include <linux/platform_device.h> -#include <mach/common.h> +#include <linux/amba/bus.h> struct platform_device *__init mxs_add_platform_device_dmamask( const char *name, int id, @@ -73,3 +72,17 @@ err: return pdev; } + +int __init mxs_add_amba_device(const struct amba_device *dev) +{ + struct amba_device *adev = kmalloc(sizeof(*adev), GFP_KERNEL); + + if (!adev) { + pr_err("%s: failed to allocate memory", __func__); + return -ENOMEM; + } + + *adev = *dev; + + return amba_device_register(adev, &iomem_resource); +} diff --git a/arch/arm/mach-mxs/devices/Kconfig b/arch/arm/mach-mxs/devices/Kconfig index a35a2dc..cf7dc1a 100644 --- a/arch/arm/mach-mxs/devices/Kconfig +++ b/arch/arm/mach-mxs/devices/Kconfig @@ -1,5 +1,6 @@ -config MXS_HAVE_PLATFORM_DUART +config MXS_HAVE_AMBA_DUART bool + select ARM_AMBA config MXS_HAVE_PLATFORM_FEC bool diff --git a/arch/arm/mach-mxs/devices/Makefile b/arch/arm/mach-mxs/devices/Makefile index 4b5266a..d0a09f6 100644 --- a/arch/arm/mach-mxs/devices/Makefile +++ b/arch/arm/mach-mxs/devices/Makefile @@ -1,2 +1,2 @@ -obj-$(CONFIG_MXS_HAVE_PLATFORM_DUART) += platform-duart.o +obj-$(CONFIG_MXS_HAVE_AMBA_DUART) += amba-duart.o obj-$(CONFIG_MXS_HAVE_PLATFORM_FEC) += platform-fec.o diff --git a/arch/arm/mach-mxs/devices/amba-duart.c b/arch/arm/mach-mxs/devices/amba-duart.c new file mode 100644 index 0000000..a559db0 --- /dev/null +++ b/arch/arm/mach-mxs/devices/amba-duart.c @@ -0,0 +1,40 @@ +/* + * Copyright (C) 2009-2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <asm/irq.h> +#include <mach/mx23.h> +#include <mach/mx28.h> +#include <mach/devices-common.h> + +#define MXS_AMBA_DUART_DEVICE(name, soc) \ +const struct amba_device name##_device __initconst = { \ + .dev = { \ + .init_name = "duart", \ + }, \ + .res = { \ + .start = soc ## _DUART_BASE_ADDR, \ + .end = (soc ## _DUART_BASE_ADDR) + SZ_8K - 1, \ + .flags = IORESOURCE_MEM, \ + }, \ + .irq = {soc ## _INT_DUART, NO_IRQ}, \ +} + +#ifdef CONFIG_SOC_IMX23 +MXS_AMBA_DUART_DEVICE(mx23_duart, MX23); +#endif + +#ifdef CONFIG_SOC_IMX28 +MXS_AMBA_DUART_DEVICE(mx28_duart, MX28); +#endif + +int __init mxs_add_duart(const struct amba_device *dev) +{ + return mxs_add_amba_device(dev); +} diff --git a/arch/arm/mach-mxs/devices/platform-duart.c b/arch/arm/mach-mxs/devices/platform-duart.c deleted file mode 100644 index 2fe0df5..0000000 --- a/arch/arm/mach-mxs/devices/platform-duart.c +++ /dev/null @@ -1,48 +0,0 @@ -/* - * Copyright (C) 2009-2010 Pengutronix - * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - * - * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. - */ -#include <mach/mx23.h> -#include <mach/mx28.h> -#include <mach/devices-common.h> - -#define mxs_duart_data_entry(soc) \ - { \ - .iobase = soc ## _DUART_BASE_ADDR, \ - .irq = soc ## _INT_DUART, \ - } - -#ifdef CONFIG_SOC_IMX23 -const struct mxs_duart_data mx23_duart_data __initconst = - mxs_duart_data_entry(MX23); -#endif - -#ifdef CONFIG_SOC_IMX28 -const struct mxs_duart_data mx28_duart_data __initconst = - mxs_duart_data_entry(MX28); -#endif - -struct platform_device *__init mxs_add_duart( - const struct mxs_duart_data *data) -{ - struct resource res[] = { - { - .start = data->iobase, - .end = data->iobase + SZ_8K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = data->irq, - .end = data->irq, - .flags = IORESOURCE_IRQ, - }, - }; - - return mxs_add_platform_device("mxs-duart", 0, res, ARRAY_SIZE(res), - NULL, 0); -} diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h index 3da48d4..6c3d1a1 100644 --- a/arch/arm/mach-mxs/include/mach/devices-common.h +++ b/arch/arm/mach-mxs/include/mach/devices-common.h @@ -9,6 +9,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/init.h> +#include <linux/amba/bus.h> struct platform_device *mxs_add_platform_device_dmamask( const char *name, int id, @@ -24,14 +25,10 @@ static inline struct platform_device *mxs_add_platform_device( name, id, res, num_resources, data, size_data, 0); } +int __init mxs_add_amba_device(const struct amba_device *dev); + /* duart */ -struct mxs_duart_data { - resource_size_t iobase; - resource_size_t iosize; - resource_size_t irq; -}; -struct platform_device *__init mxs_add_duart( - const struct mxs_duart_data *data); +int __init mxs_add_duart(const struct amba_device *dev); /* fec */ #include <linux/fec.h> -- 1.7.1 ^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH v4] ARM: mxs: Change duart device to use amba-pl011 2011-01-04 6:20 ` [PATCH v4] " Shawn Guo @ 2011-01-10 13:34 ` Wolfram Sang 0 siblings, 0 replies; 23+ messages in thread From: Wolfram Sang @ 2011-01-10 13:34 UTC (permalink / raw) To: linux-arm-kernel On Tue, Jan 04, 2011 at 02:20:52PM +0800, Shawn Guo wrote: > The mxs duart is actually an amba-pl011 device. This commit changes > the duart device code to dynamically allocate amba-pl011 device, > so that drivers/serial/amba-pl011.c can be used on mxs. > > Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Tested-by: Wolfram Sang <w.sang@pengutronix.de> -- Pengutronix e.K. | Wolfram Sang | Industrial Linux Solutions | http://www.pengutronix.de/ | -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 197 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20110110/ea3d0e4f/attachment-0001.sig> ^ permalink raw reply [flat|nested] 23+ messages in thread
end of thread, other threads:[~2011-01-10 13:34 UTC | newest] Thread overview: 23+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2010-12-20 14:57 [PATCH v8 00/15] ARM: mxs: Add initial support for MX23 and MX28 Shawn Guo 2010-12-20 14:57 ` [PATCH v8 05/15] ARM: mxs: Add low-level debug UART support Shawn Guo 2010-12-20 14:57 ` [PATCH v8 08/15] ARM: mxs: Add iomux support Shawn Guo 2010-12-20 14:57 ` [PATCH v8 13/15] ARM: mxs: Add initial mx23evk support Shawn Guo 2010-12-20 21:29 ` [PATCH v8 00/15] ARM: mxs: Add initial support for MX23 and MX28 Uwe Kleine-König 2010-12-21 8:45 ` Shawn Guo 2010-12-21 13:26 ` Shawn Guo 2010-12-21 13:12 ` [PATCH] ARM: mxs: Change duart device to use amba-pl011 Shawn Guo 2010-12-21 20:31 ` Wolfram Sang 2010-12-22 2:10 ` Shawn Guo 2010-12-22 11:41 ` Wolfram Sang 2010-12-22 20:25 ` Uwe Kleine-König 2010-12-27 11:49 ` Shawn Guo 2010-12-29 8:38 ` Uwe Kleine-König 2011-01-03 10:39 ` Russell King - ARM Linux 2011-01-04 5:41 ` Shawn Guo 2011-01-03 10:35 ` Russell King - ARM Linux 2010-12-28 15:23 ` [PATCH v2] " Shawn Guo 2010-12-29 9:12 ` Uwe Kleine-König 2010-12-31 5:16 ` Shawn Guo 2010-12-31 5:50 ` [PATCH v3] " Shawn Guo 2011-01-04 6:20 ` [PATCH v4] " Shawn Guo 2011-01-10 13:34 ` Wolfram Sang
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.