From: Zhangfei Gao <zhangfei.gao@marvell.com> To: Arnd Bergmann <arnd@arndb.de>, Nicolas Pitre <nico@fluxnic.net>, Philip Rakity <prakity@marvell.com>, Wolfram Sang <w.sang@pengutronix.de>, Chris Ball <cjb@laptop.org>, linux-mmc@vg Cc: Zhangfei Gao <zhangfei.gao@marvell.com>, Jun Nie <njun@marvell.com>, Qiming Wu <wuqm@marvell.com> Subject: [PATCH v3 2/4] mmc: support sdhci-pxav2.c Date: Fri, 3 Jun 2011 17:50:06 +0800 [thread overview] Message-ID: <1307094606-8692-1-git-send-email-zhangfei.gao@marvell.com> (raw) SDHCI driver for pxav2 SoCs, such as pxa910, the driver based on sdhci-pltfm to handle resource etc. Signed-off-by: Zhangfei Gao <zhangfei.gao@marvell.com> Signed-off-by: Jun Nie <njun@marvell.com> Signed-off-by: Qiming Wu <wuqm@marvell.com> --- drivers/mmc/host/Kconfig | 11 ++ drivers/mmc/host/Makefile | 1 + drivers/mmc/host/sdhci-pxav2.c | 261 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 273 insertions(+), 0 deletions(-) create mode 100644 drivers/mmc/host/sdhci-pxav2.c diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index 4ee869a..1a53d59 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -192,6 +192,17 @@ config MMC_SDHCI_PXAV3 If unsure, say N. +config MMC_SDHCI_PXAV2 + tristate "Marvell PXAV2 SD Host Controller support" + select MMC_SDHCI + select MMC_SDHCI_PLTFM + help + This selects the Marvell(R) PXAV2 SD Host Controller. + If you have a PXAV2 platform (such as pxa910) with SD Host Controller + and a card slot, say Y or M here. + + If unsure, say N. + config MMC_SDHCI_SPEAR tristate "SDHCI support on ST SPEAr platform" depends on MMC_SDHCI && PLAT_SPEAR diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index 9131a27..cf95330 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -10,6 +10,7 @@ obj-$(CONFIG_MMC_MXS) += mxs-mmc.o obj-$(CONFIG_MMC_SDHCI) += sdhci.o obj-$(CONFIG_MMC_SDHCI_PCI) += sdhci-pci.o obj-$(CONFIG_MMC_SDHCI_PXAV3) += sdhci-pxav3.o +obj-$(CONFIG_MMC_SDHCI_PXAV2) += sdhci-pxav2.o obj-$(CONFIG_MMC_SDHCI_S3C) += sdhci-s3c.o obj-$(CONFIG_MMC_SDHCI_SPEAR) += sdhci-spear.o obj-$(CONFIG_MMC_WBSD) += wbsd.o diff --git a/drivers/mmc/host/sdhci-pxav2.c b/drivers/mmc/host/sdhci-pxav2.c new file mode 100644 index 0000000..759f526 --- /dev/null +++ b/drivers/mmc/host/sdhci-pxav2.c @@ -0,0 +1,261 @@ +/* + * Copyright (C) 2010 Marvell International Ltd. + * Zhangfei Gao <zhangfei.gao@marvell.com> + * Kevin Wang <dwang4@marvell.com> + * Jun Nie <njun@marvell.com> + * Qiming Wu <wuqm@marvell.com> + * Philip Rakity <prakity@marvell.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/err.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <linux/mmc/card.h> +#include <linux/mmc/host.h> +#include <plat/sdhci.h> +#include <linux/slab.h> +#include "sdhci.h" +#include "sdhci-pltfm.h" + +#define SD_FIFO_PARAM 0xe0 +#define DIS_PAD_SD_CLK_GATE 0x0400 /* Turn on/off Dynamic SD Clock Gating */ +#define CLK_GATE_ON 0x0200 /* Disable/enable Clock Gate */ +#define CLK_GATE_CTL 0x0100 /* Clock Gate Control */ +#define CLK_GATE_SETTING_BITS (DIS_PAD_SD_CLK_GATE | \ + CLK_GATE_ON | CLK_GATE_CTL) + +#define SD_CLOCK_BURST_SIZE_SETUP 0xe6 +#define SDCLK_SEL_SHIFT 8 +#define SDCLK_SEL_MASK 0x3 +#define SDCLK_DELAY_SHIFT 10 +#define SDCLK_DELAY_MASK 0x3c + +#define SDHCI_HOST_CONTROL 0x28 +#define SDHCI_CTRL_4BITBUS 0x02 + +#define SD_CE_ATA_2 0xea +#define MMC_CARD 0x1000 +#define MMC_WIDTH 0x0100 + +static void pxav2_set_private_registers(struct sdhci_host *host, u8 mask) +{ + struct platform_device *pdev = to_platform_device(mmc_dev(host->mmc)); + struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data; + + if (mask == SDHCI_RESET_ALL) { + u16 tmp = 0; + + /* + * tune timing of read data/command when crc error happen + * no performance impact + */ + if (pdata->clk_delay_sel == 1) { + tmp = readw(host->ioaddr + SD_CLOCK_BURST_SIZE_SETUP); + + tmp &= ~(SDCLK_DELAY_MASK << SDCLK_DELAY_SHIFT); + tmp |= (pdata->clk_delay_cycles & SDCLK_DELAY_MASK) + << SDCLK_DELAY_SHIFT; + tmp &= ~(SDCLK_SEL_MASK << SDCLK_SEL_SHIFT); + tmp |= (1 & SDCLK_SEL_MASK) << SDCLK_SEL_SHIFT; + + writew(tmp, host->ioaddr + SD_CLOCK_BURST_SIZE_SETUP); + } + + if (pdata->flags & PXA_FLAG_ENABLE_CLOCK_GATING) { + tmp = readw(host->ioaddr + SD_FIFO_PARAM); + tmp &= ~CLK_GATE_SETTING_BITS; + writew(tmp, host->ioaddr + SD_FIFO_PARAM); + } else { + tmp = readw(host->ioaddr + SD_FIFO_PARAM); + tmp &= ~CLK_GATE_SETTING_BITS; + tmp |= CLK_GATE_SETTING_BITS; + writew(tmp, host->ioaddr + SD_FIFO_PARAM); + } + } +} + +static int pxav2_mmc_set_width(struct sdhci_host *host, int width) +{ + u8 ctrl; + u16 tmp; + + ctrl = readb(host->ioaddr + SDHCI_HOST_CONTROL); + tmp = readw(host->ioaddr + SD_CE_ATA_2); + if (width == MMC_BUS_WIDTH_8) { + ctrl &= ~SDHCI_CTRL_4BITBUS; + tmp |= MMC_CARD | MMC_WIDTH; + } else { + tmp &= ~(MMC_CARD | MMC_WIDTH); + if (width == MMC_BUS_WIDTH_4) + ctrl |= SDHCI_CTRL_4BITBUS; + else + ctrl &= ~SDHCI_CTRL_4BITBUS; + } + writew(tmp, host->ioaddr + SD_CE_ATA_2); + writeb(ctrl, host->ioaddr + SDHCI_HOST_CONTROL); + + return 0; +} + +static unsigned int pxav2_get_ro(struct sdhci_host *host) +{ + /* Micro SD does not support write-protect feature */ + return 0; +} + +static u32 pxav2_get_max_clock(struct sdhci_host *host) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + + return clk_get_rate(pltfm_host->clk); +} + +static struct sdhci_ops pxav2_sdhci_ops = { + .get_ro = pxav2_get_ro, + .get_max_clock = pxav2_get_max_clock, + .platform_reset_exit = pxav2_set_private_registers, + .platform_8bit_width = pxav2_mmc_set_width, +}; + +static int __devinit sdhci_pxav2_probe(struct platform_device *pdev) +{ + struct sdhci_pltfm_host *pltfm_host; + struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data; + struct device *dev = &pdev->dev; + struct sdhci_host *host = NULL; + struct sdhci_pxa *pxa = NULL; + int ret; + struct clk *clk; + + pxa = kzalloc(sizeof(struct sdhci_pxa), GFP_KERNEL); + if (!pxa) + return -ENOMEM; + + host = sdhci_pltfm_init(pdev, NULL); + if (IS_ERR(host)) { + kfree(pxa); + return PTR_ERR(host); + } + pltfm_host = sdhci_priv(host); + pltfm_host->priv = pxa; + + clk = clk_get(dev, "PXA-SDHCLK"); + if (IS_ERR(clk)) { + dev_err(dev, "failed to get io clock\n"); + ret = PTR_ERR(clk); + goto err_clk_get; + } + pltfm_host->clk = clk; + clk_enable(clk); + + host->quirks = SDHCI_QUIRK_BROKEN_ADMA + | SDHCI_QUIRK_BROKEN_TIMEOUT_VAL + | SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN; + + if (pdata) { + if (pdata->flags & PXA_FLAG_CARD_PERMANENT) { + /* on-chip device */ + host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION; + host->mmc->caps |= MMC_CAP_NONREMOVABLE; + } + + /* If slot design supports 8 bit data, indicate this to MMC. */ + if (pdata->flags & PXA_FLAG_SD_8_BIT_CAPABLE_SLOT) + host->mmc->caps |= MMC_CAP_8_BIT_DATA; + + if (pdata->quirks) + host->quirks |= pdata->quirks; + if (pdata->host_caps) + host->mmc->caps |= pdata->host_caps; + if (pdata->pm_caps) + host->mmc->pm_caps |= pdata->pm_caps; + } + + host->ops = &pxav2_sdhci_ops; + + ret = sdhci_add_host(host); + if (ret) { + dev_err(&pdev->dev, "failed to add host\n"); + goto err_add_host; + } + + if (pdata && pdata->max_speed) { + host->mmc->f_max = pdata->max_speed; + if (!(host->mmc->f_max > 25000000)) + host->mmc->caps &= ~(MMC_CAP_SD_HIGHSPEED | + MMC_CAP_MMC_HIGHSPEED); + } + + platform_set_drvdata(pdev, host); + + return 0; + +err_add_host: + clk_disable(clk); + clk_put(clk); +err_clk_get: + sdhci_pltfm_free(pdev); + kfree(pxa); + return ret; +} + +static int __devexit sdhci_pxav2_remove(struct platform_device *pdev) +{ + struct sdhci_host *host = platform_get_drvdata(pdev); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_pxa *pxa = pltfm_host->priv; + + sdhci_remove_host(host, 1); + + clk_disable(pltfm_host->clk); + clk_put(pltfm_host->clk); + sdhci_pltfm_free(pdev); + kfree(pxa); + + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static struct platform_driver sdhci_pxav2_driver = { + .driver = { + .name = "sdhci-pxav2", + .owner = THIS_MODULE, + }, + .probe = sdhci_pxav2_probe, + .remove = __devexit_p(sdhci_pxav2_remove), +#ifdef CONFIG_PM + .suspend = sdhci_pltfm_suspend, + .resume = sdhci_pltfm_resume, +#endif +}; +static int __init sdhci_pxav2_init(void) +{ + return platform_driver_register(&sdhci_pxav2_driver); +} + +static void __exit sdhci_pxav2_exit(void) +{ + platform_driver_unregister(&sdhci_pxav2_driver); +} + +module_init(sdhci_pxav2_init); +module_exit(sdhci_pxav2_exit); + +MODULE_DESCRIPTION("SDHCI driver for pxav2"); +MODULE_AUTHOR("Marvell International Ltd."); +MODULE_LICENSE("GPL v2"); + -- 1.7.0.4
WARNING: multiple messages have this Message-ID (diff)
From: zhangfei.gao@marvell.com (Zhangfei Gao) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v3 2/4] mmc: support sdhci-pxav2.c Date: Fri, 3 Jun 2011 17:50:06 +0800 [thread overview] Message-ID: <1307094606-8692-1-git-send-email-zhangfei.gao@marvell.com> (raw) SDHCI driver for pxav2 SoCs, such as pxa910, the driver based on sdhci-pltfm to handle resource etc. Signed-off-by: Zhangfei Gao <zhangfei.gao@marvell.com> Signed-off-by: Jun Nie <njun@marvell.com> Signed-off-by: Qiming Wu <wuqm@marvell.com> --- drivers/mmc/host/Kconfig | 11 ++ drivers/mmc/host/Makefile | 1 + drivers/mmc/host/sdhci-pxav2.c | 261 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 273 insertions(+), 0 deletions(-) create mode 100644 drivers/mmc/host/sdhci-pxav2.c diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index 4ee869a..1a53d59 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -192,6 +192,17 @@ config MMC_SDHCI_PXAV3 If unsure, say N. +config MMC_SDHCI_PXAV2 + tristate "Marvell PXAV2 SD Host Controller support" + select MMC_SDHCI + select MMC_SDHCI_PLTFM + help + This selects the Marvell(R) PXAV2 SD Host Controller. + If you have a PXAV2 platform (such as pxa910) with SD Host Controller + and a card slot, say Y or M here. + + If unsure, say N. + config MMC_SDHCI_SPEAR tristate "SDHCI support on ST SPEAr platform" depends on MMC_SDHCI && PLAT_SPEAR diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index 9131a27..cf95330 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -10,6 +10,7 @@ obj-$(CONFIG_MMC_MXS) += mxs-mmc.o obj-$(CONFIG_MMC_SDHCI) += sdhci.o obj-$(CONFIG_MMC_SDHCI_PCI) += sdhci-pci.o obj-$(CONFIG_MMC_SDHCI_PXAV3) += sdhci-pxav3.o +obj-$(CONFIG_MMC_SDHCI_PXAV2) += sdhci-pxav2.o obj-$(CONFIG_MMC_SDHCI_S3C) += sdhci-s3c.o obj-$(CONFIG_MMC_SDHCI_SPEAR) += sdhci-spear.o obj-$(CONFIG_MMC_WBSD) += wbsd.o diff --git a/drivers/mmc/host/sdhci-pxav2.c b/drivers/mmc/host/sdhci-pxav2.c new file mode 100644 index 0000000..759f526 --- /dev/null +++ b/drivers/mmc/host/sdhci-pxav2.c @@ -0,0 +1,261 @@ +/* + * Copyright (C) 2010 Marvell International Ltd. + * Zhangfei Gao <zhangfei.gao@marvell.com> + * Kevin Wang <dwang4@marvell.com> + * Jun Nie <njun@marvell.com> + * Qiming Wu <wuqm@marvell.com> + * Philip Rakity <prakity@marvell.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/err.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <linux/mmc/card.h> +#include <linux/mmc/host.h> +#include <plat/sdhci.h> +#include <linux/slab.h> +#include "sdhci.h" +#include "sdhci-pltfm.h" + +#define SD_FIFO_PARAM 0xe0 +#define DIS_PAD_SD_CLK_GATE 0x0400 /* Turn on/off Dynamic SD Clock Gating */ +#define CLK_GATE_ON 0x0200 /* Disable/enable Clock Gate */ +#define CLK_GATE_CTL 0x0100 /* Clock Gate Control */ +#define CLK_GATE_SETTING_BITS (DIS_PAD_SD_CLK_GATE | \ + CLK_GATE_ON | CLK_GATE_CTL) + +#define SD_CLOCK_BURST_SIZE_SETUP 0xe6 +#define SDCLK_SEL_SHIFT 8 +#define SDCLK_SEL_MASK 0x3 +#define SDCLK_DELAY_SHIFT 10 +#define SDCLK_DELAY_MASK 0x3c + +#define SDHCI_HOST_CONTROL 0x28 +#define SDHCI_CTRL_4BITBUS 0x02 + +#define SD_CE_ATA_2 0xea +#define MMC_CARD 0x1000 +#define MMC_WIDTH 0x0100 + +static void pxav2_set_private_registers(struct sdhci_host *host, u8 mask) +{ + struct platform_device *pdev = to_platform_device(mmc_dev(host->mmc)); + struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data; + + if (mask == SDHCI_RESET_ALL) { + u16 tmp = 0; + + /* + * tune timing of read data/command when crc error happen + * no performance impact + */ + if (pdata->clk_delay_sel == 1) { + tmp = readw(host->ioaddr + SD_CLOCK_BURST_SIZE_SETUP); + + tmp &= ~(SDCLK_DELAY_MASK << SDCLK_DELAY_SHIFT); + tmp |= (pdata->clk_delay_cycles & SDCLK_DELAY_MASK) + << SDCLK_DELAY_SHIFT; + tmp &= ~(SDCLK_SEL_MASK << SDCLK_SEL_SHIFT); + tmp |= (1 & SDCLK_SEL_MASK) << SDCLK_SEL_SHIFT; + + writew(tmp, host->ioaddr + SD_CLOCK_BURST_SIZE_SETUP); + } + + if (pdata->flags & PXA_FLAG_ENABLE_CLOCK_GATING) { + tmp = readw(host->ioaddr + SD_FIFO_PARAM); + tmp &= ~CLK_GATE_SETTING_BITS; + writew(tmp, host->ioaddr + SD_FIFO_PARAM); + } else { + tmp = readw(host->ioaddr + SD_FIFO_PARAM); + tmp &= ~CLK_GATE_SETTING_BITS; + tmp |= CLK_GATE_SETTING_BITS; + writew(tmp, host->ioaddr + SD_FIFO_PARAM); + } + } +} + +static int pxav2_mmc_set_width(struct sdhci_host *host, int width) +{ + u8 ctrl; + u16 tmp; + + ctrl = readb(host->ioaddr + SDHCI_HOST_CONTROL); + tmp = readw(host->ioaddr + SD_CE_ATA_2); + if (width == MMC_BUS_WIDTH_8) { + ctrl &= ~SDHCI_CTRL_4BITBUS; + tmp |= MMC_CARD | MMC_WIDTH; + } else { + tmp &= ~(MMC_CARD | MMC_WIDTH); + if (width == MMC_BUS_WIDTH_4) + ctrl |= SDHCI_CTRL_4BITBUS; + else + ctrl &= ~SDHCI_CTRL_4BITBUS; + } + writew(tmp, host->ioaddr + SD_CE_ATA_2); + writeb(ctrl, host->ioaddr + SDHCI_HOST_CONTROL); + + return 0; +} + +static unsigned int pxav2_get_ro(struct sdhci_host *host) +{ + /* Micro SD does not support write-protect feature */ + return 0; +} + +static u32 pxav2_get_max_clock(struct sdhci_host *host) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + + return clk_get_rate(pltfm_host->clk); +} + +static struct sdhci_ops pxav2_sdhci_ops = { + .get_ro = pxav2_get_ro, + .get_max_clock = pxav2_get_max_clock, + .platform_reset_exit = pxav2_set_private_registers, + .platform_8bit_width = pxav2_mmc_set_width, +}; + +static int __devinit sdhci_pxav2_probe(struct platform_device *pdev) +{ + struct sdhci_pltfm_host *pltfm_host; + struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data; + struct device *dev = &pdev->dev; + struct sdhci_host *host = NULL; + struct sdhci_pxa *pxa = NULL; + int ret; + struct clk *clk; + + pxa = kzalloc(sizeof(struct sdhci_pxa), GFP_KERNEL); + if (!pxa) + return -ENOMEM; + + host = sdhci_pltfm_init(pdev, NULL); + if (IS_ERR(host)) { + kfree(pxa); + return PTR_ERR(host); + } + pltfm_host = sdhci_priv(host); + pltfm_host->priv = pxa; + + clk = clk_get(dev, "PXA-SDHCLK"); + if (IS_ERR(clk)) { + dev_err(dev, "failed to get io clock\n"); + ret = PTR_ERR(clk); + goto err_clk_get; + } + pltfm_host->clk = clk; + clk_enable(clk); + + host->quirks = SDHCI_QUIRK_BROKEN_ADMA + | SDHCI_QUIRK_BROKEN_TIMEOUT_VAL + | SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN; + + if (pdata) { + if (pdata->flags & PXA_FLAG_CARD_PERMANENT) { + /* on-chip device */ + host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION; + host->mmc->caps |= MMC_CAP_NONREMOVABLE; + } + + /* If slot design supports 8 bit data, indicate this to MMC. */ + if (pdata->flags & PXA_FLAG_SD_8_BIT_CAPABLE_SLOT) + host->mmc->caps |= MMC_CAP_8_BIT_DATA; + + if (pdata->quirks) + host->quirks |= pdata->quirks; + if (pdata->host_caps) + host->mmc->caps |= pdata->host_caps; + if (pdata->pm_caps) + host->mmc->pm_caps |= pdata->pm_caps; + } + + host->ops = &pxav2_sdhci_ops; + + ret = sdhci_add_host(host); + if (ret) { + dev_err(&pdev->dev, "failed to add host\n"); + goto err_add_host; + } + + if (pdata && pdata->max_speed) { + host->mmc->f_max = pdata->max_speed; + if (!(host->mmc->f_max > 25000000)) + host->mmc->caps &= ~(MMC_CAP_SD_HIGHSPEED | + MMC_CAP_MMC_HIGHSPEED); + } + + platform_set_drvdata(pdev, host); + + return 0; + +err_add_host: + clk_disable(clk); + clk_put(clk); +err_clk_get: + sdhci_pltfm_free(pdev); + kfree(pxa); + return ret; +} + +static int __devexit sdhci_pxav2_remove(struct platform_device *pdev) +{ + struct sdhci_host *host = platform_get_drvdata(pdev); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_pxa *pxa = pltfm_host->priv; + + sdhci_remove_host(host, 1); + + clk_disable(pltfm_host->clk); + clk_put(pltfm_host->clk); + sdhci_pltfm_free(pdev); + kfree(pxa); + + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static struct platform_driver sdhci_pxav2_driver = { + .driver = { + .name = "sdhci-pxav2", + .owner = THIS_MODULE, + }, + .probe = sdhci_pxav2_probe, + .remove = __devexit_p(sdhci_pxav2_remove), +#ifdef CONFIG_PM + .suspend = sdhci_pltfm_suspend, + .resume = sdhci_pltfm_resume, +#endif +}; +static int __init sdhci_pxav2_init(void) +{ + return platform_driver_register(&sdhci_pxav2_driver); +} + +static void __exit sdhci_pxav2_exit(void) +{ + platform_driver_unregister(&sdhci_pxav2_driver); +} + +module_init(sdhci_pxav2_init); +module_exit(sdhci_pxav2_exit); + +MODULE_DESCRIPTION("SDHCI driver for pxav2"); +MODULE_AUTHOR("Marvell International Ltd."); +MODULE_LICENSE("GPL v2"); + -- 1.7.0.4
next reply other threads:[~2011-06-03 9:50 UTC|newest] Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top 2011-06-03 9:50 Zhangfei Gao [this message] 2011-06-03 9:50 ` [PATCH v3 2/4] mmc: support sdhci-pxav2.c Zhangfei Gao 2011-06-03 16:15 ` Arnd Bergmann 2011-06-03 16:15 ` Arnd Bergmann 2011-06-03 18:42 ` Philip Rakity 2011-06-03 18:42 ` Philip Rakity [not found] ` <F07D64EA-88E7-4BF2-B677-3A01215923DD@marvell.com> 2011-06-04 0:04 ` Philip Rakity 2011-06-04 0:04 ` Philip Rakity 2011-06-07 6:03 ` zhangfei gao 2011-06-07 6:03 ` zhangfei gao 2011-06-06 19:39 ` Philip Rakity 2011-06-06 19:39 ` Philip Rakity 2011-06-07 6:08 ` zhangfei gao 2011-06-07 6:08 ` zhangfei gao 2011-06-07 7:17 ` Arnd Bergmann 2011-06-07 7:17 ` Arnd Bergmann 2011-06-07 7:31 ` Eric Miao 2011-06-07 7:31 ` Eric Miao 2011-06-07 15:04 ` Philip Rakity 2011-06-07 15:04 ` Philip Rakity 2011-06-08 3:03 ` zhangfei gao 2011-06-08 3:03 ` zhangfei gao
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1307094606-8692-1-git-send-email-zhangfei.gao@marvell.com \ --to=zhangfei.gao@marvell.com \ --cc=arnd@arndb.de \ --cc=cjb@laptop.org \ --cc=linux-mmc@vg \ --cc=nico@fluxnic.net \ --cc=njun@marvell.com \ --cc=prakity@marvell.com \ --cc=w.sang@pengutronix.de \ --cc=wuqm@marvell.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.