* Afatech AF9013 @ 2011-08-15 13:34 Josu Lazkano 2011-08-15 22:07 ` Jose Alberto Reguero 0 siblings, 1 reply; 23+ messages in thread From: Josu Lazkano @ 2011-08-15 13:34 UTC (permalink / raw) To: linux-media, linux-dvb Hello, I have a problem with the KWorld USB Dual DVB-T TV Stick (DVB-T 399U): http://www.linuxtv.org/wiki/index.php/KWorld_USB_Dual_DVB-T_TV_Stick_(DVB-T_399U) I am using it on MythTV with Debian Squeeze (2.6.32). It is a dual device, sometimes the second adapter works great, but sometimes has a pixeled images. The first adapter always has pixeled images, I don't know how to describe the pixeled images, so here is a mobile record: http://dl.dropbox.com/u/1541853/kworld.3gp I have this firmware: http://palosaari.fi/linux/v4l-dvb/firmware/af9015/5.1.0.0/dvb-usb-af9015.fw I read on the linuxtv wiki and there are some problems with dual mode, there is some links for how to patch the similar driver (Afatech/ITE IT9135), but I am not good enough to understand the code. I check the kernel messages: Aug 15 13:53:58 htpc kernel: [ 516.285369] af9013: I2C read failed reg:d2e6 Aug 15 13:54:29 htpc kernel: [ 547.407504] af9013: I2C read failed reg:d330 Aug 15 13:54:44 htpc kernel: [ 561.902710] af9013: I2C read failed reg:d2e6 It looks I2C problem, but I don't know how to debug it deeper. I don't know if this is important, but I compile the s2-liplianin for other devices this way: apt-get install linux-headers-`uname -r` build-essential mkdir /usr/local/src/dvb cd /usr/local/src/dvb wget http://mercurial.intuxication.org/hg/s2-liplianin/archive/tip.zip unzip s2-liplianin-0b7d3cc65161.zip cd s2-liplianin-0b7d3cc65161 make CONFIG_DVB_FIREDTV:=n make install Can you help with this? This hardware is a very cheap and works well for HD channels but, I don't know why sometimes has pixeled images. Thanks for your help, best regards. -- Josu Lazkano ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: Afatech AF9013 2011-08-15 13:34 Afatech AF9013 Josu Lazkano @ 2011-08-15 22:07 ` Jose Alberto Reguero 2011-08-15 22:22 ` Josu Lazkano 0 siblings, 1 reply; 23+ messages in thread From: Jose Alberto Reguero @ 2011-08-15 22:07 UTC (permalink / raw) To: Josu Lazkano; +Cc: linux-media, linux-dvb I have problems with a dual usb tuner. I limit the bandwith using pid filters and the problem was gone. Jose alberto On Lunes, 15 de Agosto de 2011 15:34:20 Josu Lazkano escribió: > Hello, I have a problem with the KWorld USB Dual DVB-T TV Stick (DVB-T > 399U): > http://www.linuxtv.org/wiki/index.php/KWorld_USB_Dual_DVB-T_TV_Stick_(DVB- > T_399U) > > I am using it on MythTV with Debian Squeeze (2.6.32). It is a dual > device, sometimes the second adapter works great, but sometimes has a > pixeled images. The first adapter always has pixeled images, I don't > know how to describe the pixeled images, so here is a mobile record: > http://dl.dropbox.com/u/1541853/kworld.3gp > > I have this firmware: > http://palosaari.fi/linux/v4l-dvb/firmware/af9015/5.1.0.0/dvb-usb-af9015.fw > > I read on the linuxtv wiki and there are some problems with dual mode, > there is some links for how to patch the similar driver (Afatech/ITE > IT9135), but I am not good enough to understand the code. > > I check the kernel messages: > > Aug 15 13:53:58 htpc kernel: [ 516.285369] af9013: I2C read failed > reg:d2e6 Aug 15 13:54:29 htpc kernel: [ 547.407504] af9013: I2C read > failed reg:d330 Aug 15 13:54:44 htpc kernel: [ 561.902710] af9013: I2C > read failed reg:d2e6 > > It looks I2C problem, but I don't know how to debug it deeper. > > I don't know if this is important, but I compile the s2-liplianin for > other devices this way: > > apt-get install linux-headers-`uname -r` build-essential > mkdir /usr/local/src/dvb > cd /usr/local/src/dvb > wget http://mercurial.intuxication.org/hg/s2-liplianin/archive/tip.zip > unzip s2-liplianin-0b7d3cc65161.zip > cd s2-liplianin-0b7d3cc65161 > make CONFIG_DVB_FIREDTV:=n > make install > > Can you help with this? This hardware is a very cheap and works well > for HD channels but, I don't know why sometimes has pixeled images. > > Thanks for your help, best regards. ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: Afatech AF9013 2011-08-15 22:07 ` Jose Alberto Reguero @ 2011-08-15 22:22 ` Josu Lazkano 2011-08-15 23:16 ` Jose Alberto Reguero 0 siblings, 1 reply; 23+ messages in thread From: Josu Lazkano @ 2011-08-15 22:22 UTC (permalink / raw) To: Jose Alberto Reguero; +Cc: linux-media, linux-dvb 2011/8/16 Jose Alberto Reguero <jareguero@telefonica.net>: > I have problems with a dual usb tuner. I limit the bandwith using pid filters > and the problem was gone. > > Jose alberto > > On Lunes, 15 de Agosto de 2011 15:34:20 Josu Lazkano escribió: >> Hello, I have a problem with the KWorld USB Dual DVB-T TV Stick (DVB-T >> 399U): >> http://www.linuxtv.org/wiki/index.php/KWorld_USB_Dual_DVB-T_TV_Stick_(DVB- >> T_399U) >> >> I am using it on MythTV with Debian Squeeze (2.6.32). It is a dual >> device, sometimes the second adapter works great, but sometimes has a >> pixeled images. The first adapter always has pixeled images, I don't >> know how to describe the pixeled images, so here is a mobile record: >> http://dl.dropbox.com/u/1541853/kworld.3gp >> >> I have this firmware: >> http://palosaari.fi/linux/v4l-dvb/firmware/af9015/5.1.0.0/dvb-usb-af9015.fw >> >> I read on the linuxtv wiki and there are some problems with dual mode, >> there is some links for how to patch the similar driver (Afatech/ITE >> IT9135), but I am not good enough to understand the code. >> >> I check the kernel messages: >> >> Aug 15 13:53:58 htpc kernel: [ 516.285369] af9013: I2C read failed >> reg:d2e6 Aug 15 13:54:29 htpc kernel: [ 547.407504] af9013: I2C read >> failed reg:d330 Aug 15 13:54:44 htpc kernel: [ 561.902710] af9013: I2C >> read failed reg:d2e6 >> >> It looks I2C problem, but I don't know how to debug it deeper. >> >> I don't know if this is important, but I compile the s2-liplianin for >> other devices this way: >> >> apt-get install linux-headers-`uname -r` build-essential >> mkdir /usr/local/src/dvb >> cd /usr/local/src/dvb >> wget http://mercurial.intuxication.org/hg/s2-liplianin/archive/tip.zip >> unzip s2-liplianin-0b7d3cc65161.zip >> cd s2-liplianin-0b7d3cc65161 >> make CONFIG_DVB_FIREDTV:=n >> make install >> >> Can you help with this? This hardware is a very cheap and works well >> for HD channels but, I don't know why sometimes has pixeled images. >> >> Thanks for your help, best regards. > Thanks Jose Alberto, I search on google for pid filters but I don't find any interesting info. How can I limit bandwidth on dvb? Thanks for your help, I have two dual devices waiting for this fix on my HTPC. Best regards. -- Josu Lazkano ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: Afatech AF9013 2011-08-15 22:22 ` Josu Lazkano @ 2011-08-15 23:16 ` Jose Alberto Reguero 2011-08-16 16:37 ` Josu Lazkano 0 siblings, 1 reply; 23+ messages in thread From: Jose Alberto Reguero @ 2011-08-15 23:16 UTC (permalink / raw) To: Josu Lazkano; +Cc: linux-media, linux-dvb On Martes, 16 de Agosto de 2011 00:22:05 Josu Lazkano escribió: > 2011/8/16 Jose Alberto Reguero <jareguero@telefonica.net>: > > I have problems with a dual usb tuner. I limit the bandwith using pid > > filters and the problem was gone. > > > > Jose alberto > > > > On Lunes, 15 de Agosto de 2011 15:34:20 Josu Lazkano escribió: > >> Hello, I have a problem with the KWorld USB Dual DVB-T TV Stick (DVB-T > >> 399U): > >> http://www.linuxtv.org/wiki/index.php/KWorld_USB_Dual_DVB-T_TV_Stick_(DV > >> B- T_399U) > >> > >> I am using it on MythTV with Debian Squeeze (2.6.32). It is a dual > >> device, sometimes the second adapter works great, but sometimes has a > >> pixeled images. The first adapter always has pixeled images, I don't > >> know how to describe the pixeled images, so here is a mobile record: > >> http://dl.dropbox.com/u/1541853/kworld.3gp > >> > >> I have this firmware: > >> http://palosaari.fi/linux/v4l-dvb/firmware/af9015/5.1.0.0/dvb-usb-af9015 > >> .fw > >> > >> I read on the linuxtv wiki and there are some problems with dual mode, > >> there is some links for how to patch the similar driver (Afatech/ITE > >> IT9135), but I am not good enough to understand the code. > >> > >> I check the kernel messages: > >> > >> Aug 15 13:53:58 htpc kernel: [ 516.285369] af9013: I2C read failed > >> reg:d2e6 Aug 15 13:54:29 htpc kernel: [ 547.407504] af9013: I2C read > >> failed reg:d330 Aug 15 13:54:44 htpc kernel: [ 561.902710] af9013: I2C > >> read failed reg:d2e6 > >> > >> It looks I2C problem, but I don't know how to debug it deeper. > >> > >> I don't know if this is important, but I compile the s2-liplianin for > >> other devices this way: > >> > >> apt-get install linux-headers-`uname -r` build-essential > >> mkdir /usr/local/src/dvb > >> cd /usr/local/src/dvb > >> wget http://mercurial.intuxication.org/hg/s2-liplianin/archive/tip.zip > >> unzip s2-liplianin-0b7d3cc65161.zip > >> cd s2-liplianin-0b7d3cc65161 > >> make CONFIG_DVB_FIREDTV:=n > >> make install > >> > >> Can you help with this? This hardware is a very cheap and works well > >> for HD channels but, I don't know why sometimes has pixeled images. > >> > >> Thanks for your help, best regards. > > Thanks Jose Alberto, I search on google for pid filters but I don't > find any interesting info. > > How can I limit bandwidth on dvb? > > Thanks for your help, I have two dual devices waiting for this fix on my > HTPC. > > Best regards. If the driver has pid filters you can enable it with the parameter force_pid_filter_usage=1 of dvb-usb. Jose Alberto ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: Afatech AF9013 2011-08-15 23:16 ` Jose Alberto Reguero @ 2011-08-16 16:37 ` Josu Lazkano 2011-08-16 20:27 ` Jose Alberto Reguero 0 siblings, 1 reply; 23+ messages in thread From: Josu Lazkano @ 2011-08-16 16:37 UTC (permalink / raw) To: Jose Alberto Reguero; +Cc: linux-media, linux-dvb Thanks again, I edit /etc/modprobe.d/options.conf options dvb_usb_af9015 adapter_nr=4,5 options dvb-usb disable_rc_polling=1 options dvb-usb force_pid_filter_usage=1 I change the signal timeout and tuning timeout and now it works perfect! I can watch two HD channels, thanks for your help. I really don't understand what force_pid_filter_usage do on the module, is there any documentation? Thanks and best regards. 2011/8/16 Jose Alberto Reguero <jareguero@telefonica.net>: > On Martes, 16 de Agosto de 2011 00:22:05 Josu Lazkano escribió: >> 2011/8/16 Jose Alberto Reguero <jareguero@telefonica.net>: >> > I have problems with a dual usb tuner. I limit the bandwith using pid >> > filters and the problem was gone. >> > >> > Jose alberto >> > >> > On Lunes, 15 de Agosto de 2011 15:34:20 Josu Lazkano escribió: >> >> Hello, I have a problem with the KWorld USB Dual DVB-T TV Stick (DVB-T >> >> 399U): >> >> http://www.linuxtv.org/wiki/index.php/KWorld_USB_Dual_DVB-T_TV_Stick_(DV >> >> B- T_399U) >> >> >> >> I am using it on MythTV with Debian Squeeze (2.6.32). It is a dual >> >> device, sometimes the second adapter works great, but sometimes has a >> >> pixeled images. The first adapter always has pixeled images, I don't >> >> know how to describe the pixeled images, so here is a mobile record: >> >> http://dl.dropbox.com/u/1541853/kworld.3gp >> >> >> >> I have this firmware: >> >> http://palosaari.fi/linux/v4l-dvb/firmware/af9015/5.1.0.0/dvb-usb-af9015 >> >> .fw >> >> >> >> I read on the linuxtv wiki and there are some problems with dual mode, >> >> there is some links for how to patch the similar driver (Afatech/ITE >> >> IT9135), but I am not good enough to understand the code. >> >> >> >> I check the kernel messages: >> >> >> >> Aug 15 13:53:58 htpc kernel: [ 516.285369] af9013: I2C read failed >> >> reg:d2e6 Aug 15 13:54:29 htpc kernel: [ 547.407504] af9013: I2C read >> >> failed reg:d330 Aug 15 13:54:44 htpc kernel: [ 561.902710] af9013: I2C >> >> read failed reg:d2e6 >> >> >> >> It looks I2C problem, but I don't know how to debug it deeper. >> >> >> >> I don't know if this is important, but I compile the s2-liplianin for >> >> other devices this way: >> >> >> >> apt-get install linux-headers-`uname -r` build-essential >> >> mkdir /usr/local/src/dvb >> >> cd /usr/local/src/dvb >> >> wget http://mercurial.intuxication.org/hg/s2-liplianin/archive/tip.zip >> >> unzip s2-liplianin-0b7d3cc65161.zip >> >> cd s2-liplianin-0b7d3cc65161 >> >> make CONFIG_DVB_FIREDTV:=n >> >> make install >> >> >> >> Can you help with this? This hardware is a very cheap and works well >> >> for HD channels but, I don't know why sometimes has pixeled images. >> >> >> >> Thanks for your help, best regards. >> >> Thanks Jose Alberto, I search on google for pid filters but I don't >> find any interesting info. >> >> How can I limit bandwidth on dvb? >> >> Thanks for your help, I have two dual devices waiting for this fix on my >> HTPC. >> >> Best regards. > > If the driver has pid filters you can enable it with the parameter > force_pid_filter_usage=1 of dvb-usb. > > Jose Alberto > -- Josu Lazkano ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: Afatech AF9013 2011-08-16 16:37 ` Josu Lazkano @ 2011-08-16 20:27 ` Jose Alberto Reguero 2011-08-16 20:57 ` Antti Palosaari 0 siblings, 1 reply; 23+ messages in thread From: Jose Alberto Reguero @ 2011-08-16 20:27 UTC (permalink / raw) To: Josu Lazkano; +Cc: linux-media, linux-dvb On Martes, 16 de Agosto de 2011 18:37:49 Josu Lazkano escribió: > Thanks again, I edit /etc/modprobe.d/options.conf > > options dvb_usb_af9015 adapter_nr=4,5 > options dvb-usb disable_rc_polling=1 > options dvb-usb force_pid_filter_usage=1 > > I change the signal timeout and tuning timeout and now it works perfect! > > I can watch two HD channels, thanks for your help. > > I really don't understand what force_pid_filter_usage do on the > module, is there any documentation? > > Thanks and best regards. > For usb devices with usb 2.0 when tunned to a channel there is enought usb bandwith to deliver the whole transponder. With pid filters they only deliver the pids needed for the channel. The only limit is that the pid filters is limited normaly to 32 pids. Jose Alberto > 2011/8/16 Jose Alberto Reguero <jareguero@telefonica.net>: > > On Martes, 16 de Agosto de 2011 00:22:05 Josu Lazkano escribió: > >> 2011/8/16 Jose Alberto Reguero <jareguero@telefonica.net>: > >> > I have problems with a dual usb tuner. I limit the bandwith using pid > >> > filters and the problem was gone. > >> > > >> > Jose alberto > >> > > >> > On Lunes, 15 de Agosto de 2011 15:34:20 Josu Lazkano escribió: > >> >> Hello, I have a problem with the KWorld USB Dual DVB-T TV Stick > >> >> (DVB-T 399U): > >> >> http://www.linuxtv.org/wiki/index.php/KWorld_USB_Dual_DVB-T_TV_Stick_ > >> >> (DV B- T_399U) > >> >> > >> >> I am using it on MythTV with Debian Squeeze (2.6.32). It is a dual > >> >> device, sometimes the second adapter works great, but sometimes has a > >> >> pixeled images. The first adapter always has pixeled images, I don't > >> >> know how to describe the pixeled images, so here is a mobile record: > >> >> http://dl.dropbox.com/u/1541853/kworld.3gp > >> >> > >> >> I have this firmware: > >> >> http://palosaari.fi/linux/v4l-dvb/firmware/af9015/5.1.0.0/dvb-usb-af9 > >> >> 015 .fw > >> >> > >> >> I read on the linuxtv wiki and there are some problems with dual > >> >> mode, there is some links for how to patch the similar driver > >> >> (Afatech/ITE IT9135), but I am not good enough to understand the > >> >> code. > >> >> > >> >> I check the kernel messages: > >> >> > >> >> Aug 15 13:53:58 htpc kernel: [ 516.285369] af9013: I2C read failed > >> >> reg:d2e6 Aug 15 13:54:29 htpc kernel: [ 547.407504] af9013: I2C read > >> >> failed reg:d330 Aug 15 13:54:44 htpc kernel: [ 561.902710] af9013: > >> >> I2C read failed reg:d2e6 > >> >> > >> >> It looks I2C problem, but I don't know how to debug it deeper. > >> >> > >> >> I don't know if this is important, but I compile the s2-liplianin for > >> >> other devices this way: > >> >> > >> >> apt-get install linux-headers-`uname -r` build-essential > >> >> mkdir /usr/local/src/dvb > >> >> cd /usr/local/src/dvb > >> >> wget > >> >> http://mercurial.intuxication.org/hg/s2-liplianin/archive/tip.zip > >> >> unzip s2-liplianin-0b7d3cc65161.zip > >> >> cd s2-liplianin-0b7d3cc65161 > >> >> make CONFIG_DVB_FIREDTV:=n > >> >> make install > >> >> > >> >> Can you help with this? This hardware is a very cheap and works well > >> >> for HD channels but, I don't know why sometimes has pixeled images. > >> >> > >> >> Thanks for your help, best regards. > >> > >> Thanks Jose Alberto, I search on google for pid filters but I don't > >> find any interesting info. > >> > >> How can I limit bandwidth on dvb? > >> > >> Thanks for your help, I have two dual devices waiting for this fix on my > >> HTPC. > >> > >> Best regards. > > > > If the driver has pid filters you can enable it with the parameter > > force_pid_filter_usage=1 of dvb-usb. > > > > Jose Alberto ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: Afatech AF9013 2011-08-16 20:27 ` Jose Alberto Reguero @ 2011-08-16 20:57 ` Antti Palosaari 2011-08-16 23:23 ` Jose Alberto Reguero 0 siblings, 1 reply; 23+ messages in thread From: Antti Palosaari @ 2011-08-16 20:57 UTC (permalink / raw) To: Jose Alberto Reguero; +Cc: Josu Lazkano, linux-media On 08/16/2011 11:27 PM, Jose Alberto Reguero wrote: >> options dvb-usb force_pid_filter_usage=1 >> >> I change the signal timeout and tuning timeout and now it works perfect! >> >> I can watch two HD channels, thanks for your help. >> >> I really don't understand what force_pid_filter_usage do on the >> module, is there any documentation? >> >> Thanks and best regards. >> > > For usb devices with usb 2.0 when tunned to a channel there is enought usb > bandwith to deliver the whole transponder. With pid filters they only deliver > the pids needed for the channel. The only limit is that the pid filters is > limited normaly to 32 pids. May I ask how wide DVB-T streams you have? Here in Finland it is about 22 Mbit/sec and I think two such streams should be too much for one USB bus. I suspect there is some other bug in back of this. regards Antti -- http://palosaari.fi/ ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: Afatech AF9013 2011-08-16 20:57 ` Antti Palosaari @ 2011-08-16 23:23 ` Jose Alberto Reguero 2011-08-17 7:36 ` Josu Lazkano 2011-08-17 16:15 ` Malcolm Priestley 0 siblings, 2 replies; 23+ messages in thread From: Jose Alberto Reguero @ 2011-08-16 23:23 UTC (permalink / raw) To: Antti Palosaari; +Cc: Josu Lazkano, linux-media On Martes, 16 de Agosto de 2011 22:57:24 Antti Palosaari escribió: > On 08/16/2011 11:27 PM, Jose Alberto Reguero wrote: > >> options dvb-usb force_pid_filter_usage=1 > >> > >> I change the signal timeout and tuning timeout and now it works perfect! > >> > >> I can watch two HD channels, thanks for your help. > >> > >> I really don't understand what force_pid_filter_usage do on the > >> module, is there any documentation? > >> > >> Thanks and best regards. > > > > For usb devices with usb 2.0 when tunned to a channel there is enought > > usb bandwith to deliver the whole transponder. With pid filters they > > only deliver the pids needed for the channel. The only limit is that the > > pid filters is limited normaly to 32 pids. > > May I ask how wide DVB-T streams you have? Here in Finland it is about > 22 Mbit/sec and I think two such streams should be too much for one USB > bus. I suspect there is some other bug in back of this. > > regards > Antti Here the transport stream is like yours. About 4 Mbit/sec by channel, and about 5 channels by transport stream. The problem I have is that when I have the two tuners working I have a few packets lost, and I have some TS discontinuitys. With pid filters the stream is perfect. Perhaps Josu have another problem. Jose Alberto ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: Afatech AF9013 2011-08-16 23:23 ` Jose Alberto Reguero @ 2011-08-17 7:36 ` Josu Lazkano 2011-08-17 20:36 ` Antti Palosaari 2011-08-17 16:15 ` Malcolm Priestley 1 sibling, 1 reply; 23+ messages in thread From: Josu Lazkano @ 2011-08-17 7:36 UTC (permalink / raw) To: Jose Alberto Reguero; +Cc: Antti Palosaari, linux-media 2011/8/17 Jose Alberto Reguero <jareguero@telefonica.net>: > On Martes, 16 de Agosto de 2011 22:57:24 Antti Palosaari escribió: >> On 08/16/2011 11:27 PM, Jose Alberto Reguero wrote: >> >> options dvb-usb force_pid_filter_usage=1 >> >> >> >> I change the signal timeout and tuning timeout and now it works perfect! >> >> >> >> I can watch two HD channels, thanks for your help. >> >> >> >> I really don't understand what force_pid_filter_usage do on the >> >> module, is there any documentation? >> >> >> >> Thanks and best regards. >> > >> > For usb devices with usb 2.0 when tunned to a channel there is enought >> > usb bandwith to deliver the whole transponder. With pid filters they >> > only deliver the pids needed for the channel. The only limit is that the >> > pid filters is limited normaly to 32 pids. >> >> May I ask how wide DVB-T streams you have? Here in Finland it is about >> 22 Mbit/sec and I think two such streams should be too much for one USB >> bus. I suspect there is some other bug in back of this. >> >> regards >> Antti > > Here the transport stream is like yours. About 4 Mbit/sec by channel, and > about 5 channels by transport stream. The problem I have is that when I have > the two tuners working I have a few packets lost, and I have some TS > discontinuitys. With pid filters the stream is perfect. Perhaps Josu have > another problem. > > Jose Alberto > Thanks both! I don't know how wide is the stream, but it could be a USB wide limitation. My board is a little ION based and I have some USB devices: $ lsusb Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 006: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) Bus 002 Device 005: ID 04fc:05d8 Sunplus Technology Co., Ltd Wireless keyboard/mouse Bus 002 Device 004: ID 0471:0815 Philips (or NXP) eHome Infrared Receiver Bus 002 Device 003: ID 9022:d660 TeVii Technology Ltd. DVB-S2 S660 Bus 002 Device 002: ID 05e3:0606 Genesys Logic, Inc. USB 2.0 Hub / D-Link DUB-H4 USB 2.0 Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 1b80:e399 Afatech Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub The problematic twin device is the "Afatech" one, there is an DVB-S2 USB tuner, a bluetooth dongle, a IR receiver and a wireless mouse/keybord receiver. Now I am at work, I will try to disconnect all devices and try with just the DVB-T device. I use to try with MythTV if it works or not. Is there any other tool to test and debug more deep about USB or DVB wide? I apreciate your help. Thanks and best regards. -- Josu Lazkano ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: Afatech AF9013 2011-08-17 7:36 ` Josu Lazkano @ 2011-08-17 20:36 ` Antti Palosaari 2011-08-19 14:47 ` Josu Lazkano 0 siblings, 1 reply; 23+ messages in thread From: Antti Palosaari @ 2011-08-17 20:36 UTC (permalink / raw) To: Josu Lazkano; +Cc: Jose Alberto Reguero, linux-media On 08/17/2011 10:36 AM, Josu Lazkano wrote: > I don't know how wide is the stream, but it could be a USB wide > limitation. My board is a little ION based and I have some USB > devices: > $ lsusb > Bus 001 Device 002: ID 1b80:e399 Afatech > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub I don't think so. Total under 50Mbit/sec stream should not be too much for one USB2.0 root hub. Which is chipset used ION (it is southbridge which contains usually USB ports)? > The problematic twin device is the "Afatech" one, there is an DVB-S2 > USB tuner, a bluetooth dongle, a IR receiver and a wireless > mouse/keybord receiver. > > Now I am at work, I will try to disconnect all devices and try with > just the DVB-T device. > > I use to try with MythTV if it works or not. Is there any other tool > to test and debug more deep about USB or DVB wide? You can look stream sizes using dvbtraffic tool. It is last line of output which shows total stream size. tzap can be used to tune channel. But it you can use some other app like MythTV and then run dvbtraffic same time. > I apreciate your help. Thanks and best regards. regards Antti -- http://palosaari.fi/ ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: Afatech AF9013 2011-08-17 20:36 ` Antti Palosaari @ 2011-08-19 14:47 ` Josu Lazkano 0 siblings, 0 replies; 23+ messages in thread From: Josu Lazkano @ 2011-08-19 14:47 UTC (permalink / raw) To: Antti Palosaari; +Cc: Jose Alberto Reguero, linux-media 2011/8/17 Antti Palosaari <crope@iki.fi>: > On 08/17/2011 10:36 AM, Josu Lazkano wrote: >> I don't know how wide is the stream, but it could be a USB wide >> limitation. My board is a little ION based and I have some USB >> devices: >> $ lsusb >> Bus 001 Device 002: ID 1b80:e399 Afatech >> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > > I don't think so. Total under 50Mbit/sec stream should not be too much > for one USB2.0 root hub. > > Which is chipset used ION (it is southbridge which contains usually USB > ports)? > >> The problematic twin device is the "Afatech" one, there is an DVB-S2 >> USB tuner, a bluetooth dongle, a IR receiver and a wireless >> mouse/keybord receiver. >> >> Now I am at work, I will try to disconnect all devices and try with >> just the DVB-T device. >> >> I use to try with MythTV if it works or not. Is there any other tool >> to test and debug more deep about USB or DVB wide? > > You can look stream sizes using dvbtraffic tool. It is last line of > output which shows total stream size. > > tzap can be used to tune channel. But it you can use some other app like > MythTV and then run dvbtraffic same time. > >> I apreciate your help. Thanks and best regards. > > regards > Antti > > -- > http://palosaari.fi/ > Thanks Antti, I don't know the chipset model, my board is this one: ZOTAC ION ITX-G Synergy Edition: http://www.zotac.com/pdbrochures/mb/ION-ITX-G-E-Synergy-Edition_v1.3.pdf On the BIOS there is something about southbridge, but now I am connected remotely so I can not access to the BIOS, I must change something on the BIOS? I make this steps to record a TV channel: 1. Scan with w_scan with both adapters: w_scan -a 2 -ft -c ES >> canales1_TDT.conf w_scan -a 3 -ft -c ES >> canales2_TDT.conf Here is the output and the channel files: http://dl.dropbox.com/u/1541853/w_scan1 http://dl.dropbox.com/u/1541853/canales1_TDT.conf http://dl.dropbox.com/u/1541853/w_scan2 http://dl.dropbox.com/u/1541853/canales2_TDT.conf I think there is something wrong, because there must be more channels as TVE 1, La 2... How can I tune the correct channel? I try this: $ tzap -a 2 -c canales1_TDT.conf -r "TELECINCO" using '/dev/dvb/adapter2/frontend0' and '/dev/dvb/adapter2/demux0' reading channels from file 'canales1_TDT.conf' ERROR: could not find channel 'TELECINCO' in channel list I want to try to tune the channel and record it with gnutv and see if there is any problem. Thanks for the dvbtraffic tool. Thanks for all your help, best regards. -- Josu Lazkano ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: Afatech AF9013 2011-08-16 23:23 ` Jose Alberto Reguero 2011-08-17 7:36 ` Josu Lazkano @ 2011-08-17 16:15 ` Malcolm Priestley 2011-08-17 17:27 ` Josu Lazkano 1 sibling, 1 reply; 23+ messages in thread From: Malcolm Priestley @ 2011-08-17 16:15 UTC (permalink / raw) To: linux-media; +Cc: Antti Palosaari, Josu Lazkano, Jose Alberto Reguero On Wed, 2011-08-17 at 01:23 +0200, Jose Alberto Reguero wrote: > On Martes, 16 de Agosto de 2011 22:57:24 Antti Palosaari escribió: > > On 08/16/2011 11:27 PM, Jose Alberto Reguero wrote: > > >> options dvb-usb force_pid_filter_usage=1 > > >> > > >> I change the signal timeout and tuning timeout and now it works perfect! > > >> > > >> I can watch two HD channels, thanks for your help. > > >> > > >> I really don't understand what force_pid_filter_usage do on the > > >> module, is there any documentation? > > >> > > >> Thanks and best regards. > > > > > > For usb devices with usb 2.0 when tunned to a channel there is enought > > > usb bandwith to deliver the whole transponder. With pid filters they > > > only deliver the pids needed for the channel. The only limit is that the > > > pid filters is limited normaly to 32 pids. > > > > May I ask how wide DVB-T streams you have? Here in Finland it is about > > 22 Mbit/sec and I think two such streams should be too much for one USB > > bus. I suspect there is some other bug in back of this. > > > > regards > > Antti > > Here the transport stream is like yours. About 4 Mbit/sec by channel, and > about 5 channels by transport stream. The problem I have is that when I have > the two tuners working I have a few packets lost, and I have some TS > discontinuitys. With pid filters the stream is perfect. Perhaps Josu have > another problem. I am certain it is the configuration of the second frontend that ripples through Afatech devices. I have only got a single AF9015 device so can't test the dual configuration. Does the same problems exist when running the second frontend solo or dual with the Windows driver? With the IT1937(aka AF9035) the second frontend appeared not to work at all in Windows in dual mode. tvboxspy ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: Afatech AF9013 2011-08-17 16:15 ` Malcolm Priestley @ 2011-08-17 17:27 ` Josu Lazkano 2011-08-17 21:09 ` Malcolm Priestley 0 siblings, 1 reply; 23+ messages in thread From: Josu Lazkano @ 2011-08-17 17:27 UTC (permalink / raw) To: Malcolm Priestley; +Cc: linux-media, Antti Palosaari, Jose Alberto Reguero 2011/8/17 Malcolm Priestley <tvboxspy@gmail.com>: > On Wed, 2011-08-17 at 01:23 +0200, Jose Alberto Reguero wrote: >> On Martes, 16 de Agosto de 2011 22:57:24 Antti Palosaari escribió: >> > On 08/16/2011 11:27 PM, Jose Alberto Reguero wrote: >> > >> options dvb-usb force_pid_filter_usage=1 >> > >> >> > >> I change the signal timeout and tuning timeout and now it works perfect! >> > >> >> > >> I can watch two HD channels, thanks for your help. >> > >> >> > >> I really don't understand what force_pid_filter_usage do on the >> > >> module, is there any documentation? >> > >> >> > >> Thanks and best regards. >> > > >> > > For usb devices with usb 2.0 when tunned to a channel there is enought >> > > usb bandwith to deliver the whole transponder. With pid filters they >> > > only deliver the pids needed for the channel. The only limit is that the >> > > pid filters is limited normaly to 32 pids. >> > >> > May I ask how wide DVB-T streams you have? Here in Finland it is about >> > 22 Mbit/sec and I think two such streams should be too much for one USB >> > bus. I suspect there is some other bug in back of this. >> > >> > regards >> > Antti >> >> Here the transport stream is like yours. About 4 Mbit/sec by channel, and >> about 5 channels by transport stream. The problem I have is that when I have >> the two tuners working I have a few packets lost, and I have some TS >> discontinuitys. With pid filters the stream is perfect. Perhaps Josu have >> another problem. > > I am certain it is the configuration of the second frontend that ripples > through Afatech devices. > > I have only got a single AF9015 device so can't test the dual > configuration. > > Does the same problems exist when running the second frontend solo or > dual with the Windows driver? > > With the IT1937(aka AF9035) the second frontend appeared not to work at > all in Windows in dual mode. > > tvboxspy > > Thanks Malcolm, sorry but I don't understand very good your post (my poor english). On Microsoft Windows XP the dual device works great, I can watch two different channels (different transponder). I want to know if there is an other command-line tool to test them, because it will be MythTV playback problem. The most problem is that sometimes one adapter work, then no adapter work and then both adapter work but there is no clear image (pixeled). How could I test if there is some packet drop? Thanks for your great help. Best regards. -- Josu Lazkano ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: Afatech AF9013 2011-08-17 17:27 ` Josu Lazkano @ 2011-08-17 21:09 ` Malcolm Priestley 0 siblings, 0 replies; 23+ messages in thread From: Malcolm Priestley @ 2011-08-17 21:09 UTC (permalink / raw) To: Josu Lazkano; +Cc: linux-media, Antti Palosaari, Jose Alberto Reguero On Wed, 2011-08-17 at 19:27 +0200, Josu Lazkano wrote: > 2011/8/17 Malcolm Priestley <tvboxspy@gmail.com>: > > On Wed, 2011-08-17 at 01:23 +0200, Jose Alberto Reguero wrote: > >> On Martes, 16 de Agosto de 2011 22:57:24 Antti Palosaari escribió: > >> > On 08/16/2011 11:27 PM, Jose Alberto Reguero wrote: > >> > >> options dvb-usb force_pid_filter_usage=1 > >> > >> > >> > >> I change the signal timeout and tuning timeout and now it works perfect! > >> > >> > >> > >> I can watch two HD channels, thanks for your help. > >> > >> > >> > >> I really don't understand what force_pid_filter_usage do on the > >> > >> module, is there any documentation? > >> > >> > >> > >> Thanks and best regards. > >> > > > >> > > For usb devices with usb 2.0 when tunned to a channel there is enought > >> > > usb bandwith to deliver the whole transponder. With pid filters they > >> > > only deliver the pids needed for the channel. The only limit is that the > >> > > pid filters is limited normaly to 32 pids. > >> > > >> > May I ask how wide DVB-T streams you have? Here in Finland it is about > >> > 22 Mbit/sec and I think two such streams should be too much for one USB > >> > bus. I suspect there is some other bug in back of this. > >> > > >> > regards > >> > Antti > >> > >> Here the transport stream is like yours. About 4 Mbit/sec by channel, and > >> about 5 channels by transport stream. The problem I have is that when I have > >> the two tuners working I have a few packets lost, and I have some TS > >> discontinuitys. With pid filters the stream is perfect. Perhaps Josu have > >> another problem. > > > > I am certain it is the configuration of the second frontend that ripples > > through Afatech devices. > > > > I have only got a single AF9015 device so can't test the dual > > configuration. > > > > Does the same problems exist when running the second frontend solo or > > dual with the Windows driver? > > > > With the IT1937(aka AF9035) the second frontend appeared not to work at > > all in Windows in dual mode. > > > > tvboxspy > > > > > > Thanks Malcolm, sorry but I don't understand very good your post (my > poor english). > > On Microsoft Windows XP the dual device works great, I can watch two > different channels (different transponder). > > I want to know if there is an other command-line tool to test them, > because it will be MythTV playback problem. > > The most problem is that sometimes one adapter work, then no adapter > work and then both adapter work but there is no clear image (pixeled). > > How could I test if there is some packet drop? Looks like you need pid filtering on, but if you force the pid filter on, it won't work because there is no functions setup for it on the driver for the second frontend. btw, you need to force the pid filter on at boot time, add a line in file. /etc/modules (or /etc/modules.preload) dvb_usb force_pid_filter_usage=1 Otherwise, it keeps going off. But, it will only work on the first frontend(adapter). It works fine on my single one. Regards Malcolm ^ permalink raw reply [flat|nested] 23+ messages in thread
[parent not found: <CAATJ+fu5JqVmyY=zJn_CM_Eusst_YWKG2B2MAuu5fqELYYsYqA@mail.gmail.com>]
* Re: Afatech AF9013 [not found] <CAATJ+fu5JqVmyY=zJn_CM_Eusst_YWKG2B2MAuu5fqELYYsYqA@mail.gmail.com> @ 2011-08-21 1:51 ` Jason Hecker 2011-08-21 15:06 ` Josu Lazkano 2011-08-21 18:00 ` Malcolm Priestley 0 siblings, 2 replies; 23+ messages in thread From: Jason Hecker @ 2011-08-21 1:51 UTC (permalink / raw) To: linux-media I have a problem that may be related to the issues on this thread and it's driving me nuts. I have two dual tuner Afatech based cards, they are both Leadtek 2000DS cards, one made by Leadtek and the other branded as KWorld but they are otherwise identical in spite of different VID:PID. On each card tuner A is an AF9015 and tuner B is an AF9013. The KWorld card worked just fine for about 18 months in Mythbuntu 10.04 with the rebuilt and patched modules as described in the Wiki entry on the 2000DS. A few weeks ago tuner A started giving errors making the viewing unwatchable so figuring the card had died I bought the Leadtek. To my surprise it gave the same problem as the KWorld when using tuner A. It seems Tuner A is OK until Tuner B is used and then Tuner A gets a lot of errors. Tuner B never has errors. I did try using the latest "media_build" from V4L but that didn't help. So, I installed Mythbuntu 11.04 and with both cards I still get the same problem. Watching live TV with MythTV or with mplayer on tuner A gives errors and tuner B is always flawless even with "media_build" updates. I honestly can't recall if when the failure first occurred if I had done a routine kernel update at that time - though it would have just been the usual 2.6.32 update that is in line with 10.04 maintenance. I have tried everything imaginable to nail down the problem but can't seem to fix it. Even "options dvb-usb force_pid_filter_usage=1" seems to improve the problem somewhat but the errors are still there. I have tried every firmware from 4.65 to 5.10, adjusting the PCI latency from 32 to 96, fed each card directly from the antenna (taking the splitter out of the loop), one card fitted, both cards fitted, kernel and system upgrades (Mythbuntu 10.04 to 11.04), mplayer vs MythTV but the results are always the same. Tuner B is perfect, tuner A corrupts when Tuner B is used. There are no errors or warnings in syslog or dmesg to suggest anything has failed. I'd appreciate any suggestions at this point as I am pretty unhappy with the situation considering it *used* to work. ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: Afatech AF9013 2011-08-21 1:51 ` Jason Hecker @ 2011-08-21 15:06 ` Josu Lazkano 2011-08-21 18:00 ` Malcolm Priestley 1 sibling, 0 replies; 23+ messages in thread From: Josu Lazkano @ 2011-08-21 15:06 UTC (permalink / raw) To: Jason Hecker; +Cc: linux-media Hello again, thanks Jason for your reply. It is interesting to ear that is not just my problem. I add the dual device on a laptop with same kernel 2.6.32. It works well, both tuners working great with no pixeled images. Two weeks ago, I must change my HTPC power supply, a 300W PFC. I had some problems when connecting a 2,5 USB drive (it use to shutdown). On the local shop they test it and there are more than 5V on the USB, so they change it. How can I test the USB? Is there any USB debug tool? I don't know how to continue with this, thanks for all your help, best regards. 2011/8/21 Jason Hecker <jwhecker@gmail.com>: > I have a problem that may be related to the issues on this thread and > it's driving me nuts. > > I have two dual tuner Afatech based cards, they are both Leadtek > 2000DS cards, one made by Leadtek and the other branded as KWorld but > they are otherwise identical in spite of different VID:PID. > > On each card tuner A is an AF9015 and tuner B is an AF9013. The > KWorld card worked just fine for about 18 months in Mythbuntu 10.04 > with the rebuilt and patched modules as described in the Wiki entry on > the 2000DS. A few weeks ago tuner A started giving errors making the > viewing unwatchable so figuring the card had died I bought the > Leadtek. To my surprise it gave the same problem as the KWorld when > using tuner A. It seems Tuner A is OK until Tuner B is used and then > Tuner A gets a lot of errors. Tuner B never has errors. I did try > using the latest "media_build" from V4L but that didn't help. > > So, I installed Mythbuntu 11.04 and with both cards I > still get the same problem. Watching live TV with MythTV or with > mplayer on tuner A gives errors and tuner B is always flawless even > with "media_build" updates. > > I honestly can't recall if when the failure first occurred if I had > done a routine kernel update at that time - though it would have just > been the usual 2.6.32 update that is in line with 10.04 maintenance. > > I have tried everything imaginable to nail down the problem but can't > seem to fix it. Even "options dvb-usb force_pid_filter_usage=1" seems > to improve the problem somewhat but the errors are still there. I > have tried every firmware from 4.65 to 5.10, adjusting the PCI latency > from 32 to 96, fed each card directly from the antenna (taking the > splitter out of the loop), one card fitted, both cards fitted, kernel > and system upgrades (Mythbuntu 10.04 to 11.04), mplayer vs MythTV but > the results are always the same. Tuner B is perfect, tuner A > corrupts when Tuner B is used. There are no errors or warnings in > syslog or dmesg to > suggest anything has failed. > > I'd appreciate any suggestions at this point as I am pretty unhappy > with the situation considering it *used* to work. > -- > To unsubscribe from this list: send the line "unsubscribe linux-media" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- Josu Lazkano ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: Afatech AF9013 2011-08-21 1:51 ` Jason Hecker 2011-08-21 15:06 ` Josu Lazkano @ 2011-08-21 18:00 ` Malcolm Priestley 2011-08-22 2:05 ` Jason Hecker 1 sibling, 1 reply; 23+ messages in thread From: Malcolm Priestley @ 2011-08-21 18:00 UTC (permalink / raw) To: Jason Hecker; +Cc: linux-media On Sun, 2011-08-21 at 11:51 +1000, Jason Hecker wrote: > I have tried everything imaginable to nail down the problem but can't > seem to fix it. Even "options dvb-usb force_pid_filter_usage=1" seems > to improve the problem somewhat but the errors are still there. I > have tried every firmware from 4.65 to 5.10, adjusting the PCI latency > from 32 to 96, fed each card directly from the antenna (taking the > splitter out of the loop), one card fitted, both cards fitted, kernel > and system upgrades (Mythbuntu 10.04 to 11.04), mplayer vs MythTV but > the results are always the same. Tuner B is perfect, tuner A > corrupts when Tuner B is used. There are no errors or warnings in > syslog or dmesg to > suggest anything has failed. I think there is a BUG, where on some systems, the frontends become swapped between kernels 2.6.35 and 2.6.38 on dual tuners. I haven't fully investigated the cause, but I think it's to do with applying a later build of dvb-usb to an earlier kernel. So, Tuner B on 2.6.38(11.04) is the old Tuner A. Regards Malcolm ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: Afatech AF9013 2011-08-21 18:00 ` Malcolm Priestley @ 2011-08-22 2:05 ` Jason Hecker 2011-08-22 12:01 ` Josu Lazkano 0 siblings, 1 reply; 23+ messages in thread From: Jason Hecker @ 2011-08-22 2:05 UTC (permalink / raw) To: Malcolm Priestley; +Cc: linux-media I just tried LiveCDs of Mythbuntu 10.04 and 10.10 but had limited luck with the former and some joy with the latter. Unfortunately the default framebuffer slowed things down. Anyway in LiveCD 10.10 I used mplayer to set up and view Tuner A and Tuner B and Tuner A only showed some slight errors when Tuner B was being set up. After that for some strange reason attempt at retuning with mplayer failed utterly so I suspect there is some problems with the older versions of mplayer. These cards have blue LEDs for each tuner and light up when in use. I did notice in my testing that the LED on tuner A would flicker off briefly (and presumably issue the errors) when Tuner B was being set up. I am wondering if there is a general setup problem or even a I2S timing problem. Could someone contact me off list about sending me the data sheets for the AF901x chips? ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: Afatech AF9013 2011-08-22 2:05 ` Jason Hecker @ 2011-08-22 12:01 ` Josu Lazkano 2011-08-23 0:59 ` Jason Hecker 0 siblings, 1 reply; 23+ messages in thread From: Josu Lazkano @ 2011-08-22 12:01 UTC (permalink / raw) To: Jason Hecker; +Cc: Malcolm Priestley, linux-media 2011/8/22 Jason Hecker <jwhecker@gmail.com>: > I just tried LiveCDs of Mythbuntu 10.04 and 10.10 but had limited luck > with the former and some joy with the latter. Unfortunately the > default framebuffer slowed things down. Anyway in LiveCD 10.10 I used > mplayer to set up and view Tuner A and Tuner B and Tuner A only showed > some slight errors when Tuner B was being set up. After that for some > strange reason attempt at retuning with mplayer failed utterly so I > suspect there is some problems with the older versions of mplayer. > > These cards have blue LEDs for each tuner and light up when in use. I > did notice in my testing that the LED on tuner A would flicker off > briefly (and presumably issue the errors) when Tuner B was being set > up. I am wondering if there is a general setup problem or even a I2S > timing problem. Could someone contact me off list about sending me > the data sheets for the AF901x chips? > -- > To unsubscribe from this list: send the line "unsubscribe linux-media" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Hello again, yesterday I try to connect the KWorld USB Dual DVB-T TV Stick (DVB-T 399U) on my HTPC, I start MythTV and both tuners were working great, I could record a channel and watch an other one, both HD. But 2 hours later they start to watch bad, with pixeled images: http://dl.dropbox.com/u/1541853/kworld.3gp I don't know what happens with this tuner. I have two identical ones and both have same issues. I could share a SSH root access to everyone that want to test the tuner. I will install a fresh Debian Squeeze on my laptop and give full access to the machine. Anyone interested? I don't know what else to try with it. Thanks and best regards. -- Josu Lazkano ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: Afatech AF9013 2011-08-22 12:01 ` Josu Lazkano @ 2011-08-23 0:59 ` Jason Hecker 2011-08-23 1:47 ` Jason Hecker 0 siblings, 1 reply; 23+ messages in thread From: Jason Hecker @ 2011-08-23 0:59 UTC (permalink / raw) To: Josu Lazkano; +Cc: Malcolm Priestley, linux-media I might have found one bug so far with the Afa9013 driver. As part of refactoring the code in http://git.linuxtv.org/linux-2.6.git/commitdiff/edb709b61abd3ba475e59d1ad81aab21ad025db6 I think one of the u32->u8 calculations is wrong. The think the second last u32 in the tables has to be changed. Here is the diff. I will try it later as I have run out of time to test it this morning. This may not fix the problems we are having but it might help... So patch the file af9013_priv.h with this in the latest git media_build and see what happens. I'll report back later with my results. af9013_priv.h.diff <snip>------------------------------ 74c74 < 0x29, 0x03, 0x5d, 0x7a, 0xec, 0x01, 0x45, 0x14, 0x14 } }, --- > 0x29, 0x00, 0xa2, 0x85, 0x14, 0x01, 0x45, 0x14, 0x14 } }, 77c77 < 0xe4, 0x03, 0x71, 0xcb, 0xe8, 0x01, 0x1c, 0x71, 0x32 } }, --- > 0xe4, 0x00, 0x8e, 0x34, 0x72, 0x01, 0x1c, 0x71, 0x32 } }, 80c80 < 0x9e, 0x03, 0x86, 0x1c, 0x31, 0x00, 0xf3, 0xcf, 0x0f } }, --- > 0x9e, 0x00, 0x79, 0xe3, 0xcf, 0x00, 0xf3, 0xcf, 0x0f } }, 84c84 < 0x49, 0x03, 0x1b, 0x74, 0xdb, 0x01, 0xc9, 0x24, 0x25 } }, --- > 0x49, 0x00, 0xe4, 0x8b, 0x25, 0x01, 0xc9, 0x24, 0x25 } }, 87c87 < 0x00, 0x03, 0x38, 0x06, 0x40, 0x01, 0x90, 0x00, 0x00 } }, --- > 0x00, 0x00, 0xc7, 0xf9, 0xc0, 0x01, 0x90, 0x00, 0x00 } }, 90c90 < 0xb7, 0x03, 0x54, 0x97, 0xa4, 0x01, 0x56, 0xdb, 0x1c } }, --- > 0xb7, 0x00, 0xab, 0x68, 0x5c, 0x01, 0x56, 0xdb, 0x1c } }, 94c94 < 0x05, 0x03, 0x58, 0xd6, 0x34, 0x01, 0x4e, 0x5e, 0x03 } }, --- > 0x05, 0x00, 0xa7, 0x29, 0xcc, 0x01, 0x4e, 0x5e, 0x03 } }, 97c97 < 0x25, 0x03, 0x6d, 0xbb, 0x6e, 0x01, 0x24, 0x92, 0x12 } }, --- > 0x25, 0x00, 0x92, 0x44, 0x92, 0x01, 0x24, 0x92, 0x12 } }, 100c100 < 0x44, 0x03, 0x82, 0xa0, 0xa7, 0x00, 0xfa, 0xc6, 0x22 } }, --- > 0x44, 0x00, 0x7d, 0x5f, 0x59, 0x00, 0xfa, 0xc6, 0x22 } }, 104c104 < 0xe7, 0x03, 0x44, 0xc6, 0xf3, 0x01, 0x76, 0x7d, 0x34 } }, --- > 0xe7, 0x00, 0xbb, 0x39, 0x0d, 0x01, 0x76, 0x7d, 0x34 } }, 107c107 < 0x0a, 0x03, 0x5c, 0x2e, 0x14, 0x01, 0x47, 0xae, 0x05 } }, --- > 0x0a, 0x00, 0xa3, 0xd1, 0xec, 0x01, 0x47, 0xae, 0x05 } }, 110c110 < 0x2d, 0x03, 0x73, 0x95, 0x36, 0x01, 0x18, 0xde, 0x17 } }, --- > 0x2d, 0x00, 0x8c, 0x6a, 0xca, 0x01, 0x18, 0xde, 0x17 } }, ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: Afatech AF9013 2011-08-23 0:59 ` Jason Hecker @ 2011-08-23 1:47 ` Jason Hecker 2011-08-29 18:40 ` Josu Lazkano 0 siblings, 1 reply; 23+ messages in thread From: Jason Hecker @ 2011-08-23 1:47 UTC (permalink / raw) To: Josu Lazkano; +Cc: Malcolm Priestley, linux-media Damn, this patch didn't help so maybe forget this patch. Tuner A is still messed up. ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: Afatech AF9013 2011-08-23 1:47 ` Jason Hecker @ 2011-08-29 18:40 ` Josu Lazkano 2011-08-30 23:31 ` Malcolm Priestley 0 siblings, 1 reply; 23+ messages in thread From: Josu Lazkano @ 2011-08-29 18:40 UTC (permalink / raw) To: Jason Hecker; +Cc: Malcolm Priestley, linux-media 2011/8/23 Jason Hecker <jwhecker@gmail.com>: > Damn, this patch didn't help so maybe forget this patch. Tuner A is > still messed up. > Hello, thanks all to reply this post. I have no idea how to apply the patch on my Debian Squeeze. Can you help to apply the patch? Thanks your all your help. Best regards. -- Josu Lazkano ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: Afatech AF9013 2011-08-29 18:40 ` Josu Lazkano @ 2011-08-30 23:31 ` Malcolm Priestley 0 siblings, 0 replies; 23+ messages in thread From: Malcolm Priestley @ 2011-08-30 23:31 UTC (permalink / raw) To: Josu Lazkano; +Cc: Jason Hecker, linux-media On Mon, 2011-08-29 at 20:40 +0200, Josu Lazkano wrote: > 2011/8/23 Jason Hecker <jwhecker@gmail.com>: > > Damn, this patch didn't help so maybe forget this patch. Tuner A is > > still messed up. > > > > Hello, thanks all to reply this post. I have no idea how to apply the > patch on my Debian Squeeze. Can you help to apply the patch? > > Thanks your all your help. It is best applied using media_build and using a copy from the patchwork server. You can just copy the raw email to a text file, but sometimes it is malformed. Since you originally used s2-liplianin you just need patchutils to apply it to that. However, since it is older, I doubt it will apply cleanly. https://patchwork.kernel.org/patch/1090012/ For media build, check if the required packages for Debian Squeeze are the same as Ubuntu. But, it appears the patch makes no difference. Regards Malcolm MEDIA BUILD INSTALL (Instructions here are for Ubuntu) Using Terminal install git, patchutils and perl with sudo apt-get install git(or git-core) sudo apt-get install patchutils sudo apt-get install libdigest-sha1-perl sudo apt-get install libproc-processtable-perl Always build somewhere in your home directory with local user rights. Only use super user rights to install. git clone git://linuxtv.org/media_build.git cd media_build ---NO PATCH--- ./build sudo make install ---PATCH TO BE APPLIED--- Download any patch and place in the media_build directory and apply in the following way. ./build (skip this if already built) Wait for download and start to build. If you are confident that the build will complete without errors break the build with <CTRL> C Apply the patch. Make sure if applying multipliable patches they are applied oldest first. Just test the patch. patch -d linux -p1 --dry-run < the_patch_name.patch If okay apply it. patch -d linux -p1 < the_patch_name.patch make distclean make sudo make install More in depth instructions here http://www.linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L-DVB_Device_Drivers ^ permalink raw reply [flat|nested] 23+ messages in thread
end of thread, other threads:[~2011-08-30 23:35 UTC | newest]
Thread overview: 23+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-08-15 13:34 Afatech AF9013 Josu Lazkano
2011-08-15 22:07 ` Jose Alberto Reguero
2011-08-15 22:22 ` Josu Lazkano
2011-08-15 23:16 ` Jose Alberto Reguero
2011-08-16 16:37 ` Josu Lazkano
2011-08-16 20:27 ` Jose Alberto Reguero
2011-08-16 20:57 ` Antti Palosaari
2011-08-16 23:23 ` Jose Alberto Reguero
2011-08-17 7:36 ` Josu Lazkano
2011-08-17 20:36 ` Antti Palosaari
2011-08-19 14:47 ` Josu Lazkano
2011-08-17 16:15 ` Malcolm Priestley
2011-08-17 17:27 ` Josu Lazkano
2011-08-17 21:09 ` Malcolm Priestley
[not found] <CAATJ+fu5JqVmyY=zJn_CM_Eusst_YWKG2B2MAuu5fqELYYsYqA@mail.gmail.com>
2011-08-21 1:51 ` Jason Hecker
2011-08-21 15:06 ` Josu Lazkano
2011-08-21 18:00 ` Malcolm Priestley
2011-08-22 2:05 ` Jason Hecker
2011-08-22 12:01 ` Josu Lazkano
2011-08-23 0:59 ` Jason Hecker
2011-08-23 1:47 ` Jason Hecker
2011-08-29 18:40 ` Josu Lazkano
2011-08-30 23:31 ` Malcolm Priestley
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.