* [PATCH v3 01/13] arm/tegra: Prep boards for gpio/pinmux conversion to pdevs
2011-08-25 23:43 ` Stephen Warren
(?)
@ 2011-08-25 23:43 ` Stephen Warren
-1 siblings, 0 replies; 69+ messages in thread
From: Stephen Warren @ 2011-08-25 23:43 UTC (permalink / raw)
To: Grant Likely, Colin Cross, Erik Gilling, Olof Johansson
Cc: Russell King, Sergei Shtylyov, Belisko Marek,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-tegra-u79uwXL29TY76Z2rM5mHXA, Linus Walleij,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
The Tegra GPIO driver will be converted from static registration via
postcore_initcall() to be a platform device later in this patch series.
A new Tegra pinmux platform device will also be added.
Prepare for this by modifying all boards to register the appropriate
platform devices before-hand, so that when the drivers are converted,
those devices will be probed, and git bisectability will be maintained.
Signed-off-by: Stephen Warren <swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
arch/arm/mach-tegra/board-harmony-pinmux.c | 8 ++++++++
arch/arm/mach-tegra/board-paz00-pinmux.c | 8 ++++++++
arch/arm/mach-tegra/board-seaboard-pinmux.c | 9 +++++++--
arch/arm/mach-tegra/board-trimslice-pinmux.c | 7 +++++++
arch/arm/mach-tegra/devices.c | 10 ++++++++++
arch/arm/mach-tegra/devices.h | 2 ++
6 files changed, 42 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-tegra/board-harmony-pinmux.c b/arch/arm/mach-tegra/board-harmony-pinmux.c
index 4d63e2e..e99b456 100644
--- a/arch/arm/mach-tegra/board-harmony-pinmux.c
+++ b/arch/arm/mach-tegra/board-harmony-pinmux.c
@@ -20,6 +20,7 @@
#include "gpio-names.h"
#include "board-harmony.h"
+#include "devices.h"
static struct tegra_pingroup_config harmony_pinmux[] = {
{TEGRA_PINGROUP_ATA, TEGRA_MUX_IDE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
@@ -140,6 +141,11 @@ static struct tegra_pingroup_config harmony_pinmux[] = {
{TEGRA_PINGROUP_XM2D, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
};
+static struct platform_device *pinmux_devices[] = {
+ &tegra_gpio_device,
+ &tegra_pinmux_device,
+};
+
static struct tegra_gpio_table gpio_table[] = {
{ .gpio = TEGRA_GPIO_SD2_CD, .enable = true },
{ .gpio = TEGRA_GPIO_SD2_WP, .enable = true },
@@ -155,6 +161,8 @@ static struct tegra_gpio_table gpio_table[] = {
void harmony_pinmux_init(void)
{
+ platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
+
tegra_pinmux_config_table(harmony_pinmux, ARRAY_SIZE(harmony_pinmux));
tegra_gpio_config(gpio_table, ARRAY_SIZE(gpio_table));
diff --git a/arch/arm/mach-tegra/board-paz00-pinmux.c b/arch/arm/mach-tegra/board-paz00-pinmux.c
index bdd2627..43633f4 100644
--- a/arch/arm/mach-tegra/board-paz00-pinmux.c
+++ b/arch/arm/mach-tegra/board-paz00-pinmux.c
@@ -20,6 +20,7 @@
#include "gpio-names.h"
#include "board-paz00.h"
+#include "devices.h"
static struct tegra_pingroup_config paz00_pinmux[] = {
{TEGRA_PINGROUP_ATA, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
@@ -140,6 +141,11 @@ static struct tegra_pingroup_config paz00_pinmux[] = {
{TEGRA_PINGROUP_XM2D, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
};
+static struct platform_device *pinmux_devices[] = {
+ &tegra_gpio_device,
+ &tegra_pinmux_device,
+};
+
static struct tegra_gpio_table gpio_table[] = {
{ .gpio = TEGRA_GPIO_SD1_CD, .enable = true },
{ .gpio = TEGRA_GPIO_SD1_WP, .enable = true },
@@ -149,6 +155,8 @@ static struct tegra_gpio_table gpio_table[] = {
void paz00_pinmux_init(void)
{
+ platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
+
tegra_pinmux_config_table(paz00_pinmux, ARRAY_SIZE(paz00_pinmux));
tegra_gpio_config(gpio_table, ARRAY_SIZE(gpio_table));
diff --git a/arch/arm/mach-tegra/board-seaboard-pinmux.c b/arch/arm/mach-tegra/board-seaboard-pinmux.c
index 74f78b7..f092298 100644
--- a/arch/arm/mach-tegra/board-seaboard-pinmux.c
+++ b/arch/arm/mach-tegra/board-seaboard-pinmux.c
@@ -21,6 +21,7 @@
#include "gpio-names.h"
#include "board-seaboard.h"
+#include "devices.h"
#define DEFAULT_DRIVE(_name) \
{ \
@@ -157,8 +158,10 @@ static __initdata struct tegra_pingroup_config seaboard_pinmux[] = {
{TEGRA_PINGROUP_XM2D, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
};
-
-
+static struct platform_device *pinmux_devices[] = {
+ &tegra_gpio_device,
+ &tegra_pinmux_device,
+};
static struct tegra_gpio_table gpio_table[] = {
{ .gpio = TEGRA_GPIO_SD2_CD, .enable = true },
@@ -173,6 +176,8 @@ static struct tegra_gpio_table gpio_table[] = {
void __init seaboard_pinmux_init(void)
{
+ platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
+
tegra_pinmux_config_table(seaboard_pinmux, ARRAY_SIZE(seaboard_pinmux));
tegra_drive_pinmux_config_table(seaboard_drive_pinmux,
diff --git a/arch/arm/mach-tegra/board-trimslice-pinmux.c b/arch/arm/mach-tegra/board-trimslice-pinmux.c
index bcb1916..4969dd2 100644
--- a/arch/arm/mach-tegra/board-trimslice-pinmux.c
+++ b/arch/arm/mach-tegra/board-trimslice-pinmux.c
@@ -21,6 +21,7 @@
#include "gpio-names.h"
#include "board-trimslice.h"
+#include "devices.h"
static __initdata struct tegra_pingroup_config trimslice_pinmux[] = {
{TEGRA_PINGROUP_ATA, TEGRA_MUX_IDE, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
@@ -141,6 +142,11 @@ static __initdata struct tegra_pingroup_config trimslice_pinmux[] = {
{TEGRA_PINGROUP_XM2D, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
};
+static struct platform_device *pinmux_devices[] = {
+ &tegra_gpio_device,
+ &tegra_pinmux_device,
+};
+
static struct tegra_gpio_table gpio_table[] = {
{ .gpio = TRIMSLICE_GPIO_SD4_CD, .enable = true }, /* mmc4 cd */
{ .gpio = TRIMSLICE_GPIO_SD4_WP, .enable = true }, /* mmc4 wp */
@@ -151,6 +157,7 @@ static struct tegra_gpio_table gpio_table[] = {
void __init trimslice_pinmux_init(void)
{
+ platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
tegra_pinmux_config_table(trimslice_pinmux, ARRAY_SIZE(trimslice_pinmux));
tegra_gpio_config(gpio_table, ARRAY_SIZE(gpio_table));
}
diff --git a/arch/arm/mach-tegra/devices.c b/arch/arm/mach-tegra/devices.c
index 57e35d2..48262bf 100644
--- a/arch/arm/mach-tegra/devices.c
+++ b/arch/arm/mach-tegra/devices.c
@@ -31,6 +31,16 @@
#include <mach/usb_phy.h>
#include "gpio-names.h"
+struct platform_device tegra_gpio_device = {
+ .name = "tegra-gpio",
+ .id = -1,
+};
+
+struct platform_device tegra_pinmux_device = {
+ .name = "tegra-pinmux",
+ .id = -1,
+};
+
static struct resource i2c_resource1[] = {
[0] = {
.start = INT_I2C,
diff --git a/arch/arm/mach-tegra/devices.h b/arch/arm/mach-tegra/devices.h
index 4a7dc0a..873ecb2 100644
--- a/arch/arm/mach-tegra/devices.h
+++ b/arch/arm/mach-tegra/devices.h
@@ -21,6 +21,8 @@
#include <linux/platform_device.h>
+extern struct platform_device tegra_gpio_device;
+extern struct platform_device tegra_pinmux_device;
extern struct platform_device tegra_sdhci_device1;
extern struct platform_device tegra_sdhci_device2;
extern struct platform_device tegra_sdhci_device3;
--
1.7.0.4
^ permalink raw reply related [flat|nested] 69+ messages in thread* [PATCH v3 01/13] arm/tegra: Prep boards for gpio/pinmux conversion to pdevs
@ 2011-08-25 23:43 ` Stephen Warren
0 siblings, 0 replies; 69+ messages in thread
From: Stephen Warren @ 2011-08-25 23:43 UTC (permalink / raw)
To: linux-arm-kernel
The Tegra GPIO driver will be converted from static registration via
postcore_initcall() to be a platform device later in this patch series.
A new Tegra pinmux platform device will also be added.
Prepare for this by modifying all boards to register the appropriate
platform devices before-hand, so that when the drivers are converted,
those devices will be probed, and git bisectability will be maintained.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
---
arch/arm/mach-tegra/board-harmony-pinmux.c | 8 ++++++++
arch/arm/mach-tegra/board-paz00-pinmux.c | 8 ++++++++
arch/arm/mach-tegra/board-seaboard-pinmux.c | 9 +++++++--
arch/arm/mach-tegra/board-trimslice-pinmux.c | 7 +++++++
arch/arm/mach-tegra/devices.c | 10 ++++++++++
arch/arm/mach-tegra/devices.h | 2 ++
6 files changed, 42 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-tegra/board-harmony-pinmux.c b/arch/arm/mach-tegra/board-harmony-pinmux.c
index 4d63e2e..e99b456 100644
--- a/arch/arm/mach-tegra/board-harmony-pinmux.c
+++ b/arch/arm/mach-tegra/board-harmony-pinmux.c
@@ -20,6 +20,7 @@
#include "gpio-names.h"
#include "board-harmony.h"
+#include "devices.h"
static struct tegra_pingroup_config harmony_pinmux[] = {
{TEGRA_PINGROUP_ATA, TEGRA_MUX_IDE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
@@ -140,6 +141,11 @@ static struct tegra_pingroup_config harmony_pinmux[] = {
{TEGRA_PINGROUP_XM2D, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
};
+static struct platform_device *pinmux_devices[] = {
+ &tegra_gpio_device,
+ &tegra_pinmux_device,
+};
+
static struct tegra_gpio_table gpio_table[] = {
{ .gpio = TEGRA_GPIO_SD2_CD, .enable = true },
{ .gpio = TEGRA_GPIO_SD2_WP, .enable = true },
@@ -155,6 +161,8 @@ static struct tegra_gpio_table gpio_table[] = {
void harmony_pinmux_init(void)
{
+ platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
+
tegra_pinmux_config_table(harmony_pinmux, ARRAY_SIZE(harmony_pinmux));
tegra_gpio_config(gpio_table, ARRAY_SIZE(gpio_table));
diff --git a/arch/arm/mach-tegra/board-paz00-pinmux.c b/arch/arm/mach-tegra/board-paz00-pinmux.c
index bdd2627..43633f4 100644
--- a/arch/arm/mach-tegra/board-paz00-pinmux.c
+++ b/arch/arm/mach-tegra/board-paz00-pinmux.c
@@ -20,6 +20,7 @@
#include "gpio-names.h"
#include "board-paz00.h"
+#include "devices.h"
static struct tegra_pingroup_config paz00_pinmux[] = {
{TEGRA_PINGROUP_ATA, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
@@ -140,6 +141,11 @@ static struct tegra_pingroup_config paz00_pinmux[] = {
{TEGRA_PINGROUP_XM2D, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
};
+static struct platform_device *pinmux_devices[] = {
+ &tegra_gpio_device,
+ &tegra_pinmux_device,
+};
+
static struct tegra_gpio_table gpio_table[] = {
{ .gpio = TEGRA_GPIO_SD1_CD, .enable = true },
{ .gpio = TEGRA_GPIO_SD1_WP, .enable = true },
@@ -149,6 +155,8 @@ static struct tegra_gpio_table gpio_table[] = {
void paz00_pinmux_init(void)
{
+ platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
+
tegra_pinmux_config_table(paz00_pinmux, ARRAY_SIZE(paz00_pinmux));
tegra_gpio_config(gpio_table, ARRAY_SIZE(gpio_table));
diff --git a/arch/arm/mach-tegra/board-seaboard-pinmux.c b/arch/arm/mach-tegra/board-seaboard-pinmux.c
index 74f78b7..f092298 100644
--- a/arch/arm/mach-tegra/board-seaboard-pinmux.c
+++ b/arch/arm/mach-tegra/board-seaboard-pinmux.c
@@ -21,6 +21,7 @@
#include "gpio-names.h"
#include "board-seaboard.h"
+#include "devices.h"
#define DEFAULT_DRIVE(_name) \
{ \
@@ -157,8 +158,10 @@ static __initdata struct tegra_pingroup_config seaboard_pinmux[] = {
{TEGRA_PINGROUP_XM2D, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
};
-
-
+static struct platform_device *pinmux_devices[] = {
+ &tegra_gpio_device,
+ &tegra_pinmux_device,
+};
static struct tegra_gpio_table gpio_table[] = {
{ .gpio = TEGRA_GPIO_SD2_CD, .enable = true },
@@ -173,6 +176,8 @@ static struct tegra_gpio_table gpio_table[] = {
void __init seaboard_pinmux_init(void)
{
+ platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
+
tegra_pinmux_config_table(seaboard_pinmux, ARRAY_SIZE(seaboard_pinmux));
tegra_drive_pinmux_config_table(seaboard_drive_pinmux,
diff --git a/arch/arm/mach-tegra/board-trimslice-pinmux.c b/arch/arm/mach-tegra/board-trimslice-pinmux.c
index bcb1916..4969dd2 100644
--- a/arch/arm/mach-tegra/board-trimslice-pinmux.c
+++ b/arch/arm/mach-tegra/board-trimslice-pinmux.c
@@ -21,6 +21,7 @@
#include "gpio-names.h"
#include "board-trimslice.h"
+#include "devices.h"
static __initdata struct tegra_pingroup_config trimslice_pinmux[] = {
{TEGRA_PINGROUP_ATA, TEGRA_MUX_IDE, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
@@ -141,6 +142,11 @@ static __initdata struct tegra_pingroup_config trimslice_pinmux[] = {
{TEGRA_PINGROUP_XM2D, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
};
+static struct platform_device *pinmux_devices[] = {
+ &tegra_gpio_device,
+ &tegra_pinmux_device,
+};
+
static struct tegra_gpio_table gpio_table[] = {
{ .gpio = TRIMSLICE_GPIO_SD4_CD, .enable = true }, /* mmc4 cd */
{ .gpio = TRIMSLICE_GPIO_SD4_WP, .enable = true }, /* mmc4 wp */
@@ -151,6 +157,7 @@ static struct tegra_gpio_table gpio_table[] = {
void __init trimslice_pinmux_init(void)
{
+ platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
tegra_pinmux_config_table(trimslice_pinmux, ARRAY_SIZE(trimslice_pinmux));
tegra_gpio_config(gpio_table, ARRAY_SIZE(gpio_table));
}
diff --git a/arch/arm/mach-tegra/devices.c b/arch/arm/mach-tegra/devices.c
index 57e35d2..48262bf 100644
--- a/arch/arm/mach-tegra/devices.c
+++ b/arch/arm/mach-tegra/devices.c
@@ -31,6 +31,16 @@
#include <mach/usb_phy.h>
#include "gpio-names.h"
+struct platform_device tegra_gpio_device = {
+ .name = "tegra-gpio",
+ .id = -1,
+};
+
+struct platform_device tegra_pinmux_device = {
+ .name = "tegra-pinmux",
+ .id = -1,
+};
+
static struct resource i2c_resource1[] = {
[0] = {
.start = INT_I2C,
diff --git a/arch/arm/mach-tegra/devices.h b/arch/arm/mach-tegra/devices.h
index 4a7dc0a..873ecb2 100644
--- a/arch/arm/mach-tegra/devices.h
+++ b/arch/arm/mach-tegra/devices.h
@@ -21,6 +21,8 @@
#include <linux/platform_device.h>
+extern struct platform_device tegra_gpio_device;
+extern struct platform_device tegra_pinmux_device;
extern struct platform_device tegra_sdhci_device1;
extern struct platform_device tegra_sdhci_device2;
extern struct platform_device tegra_sdhci_device3;
--
1.7.0.4
^ permalink raw reply related [flat|nested] 69+ messages in thread* [PATCH v3 01/13] arm/tegra: Prep boards for gpio/pinmux conversion to pdevs
@ 2011-08-25 23:43 ` Stephen Warren
0 siblings, 0 replies; 69+ messages in thread
From: Stephen Warren @ 2011-08-25 23:43 UTC (permalink / raw)
To: Grant Likely, Colin Cross, Erik Gilling, Olof Johansson
Cc: Russell King, Arnd Bergmann, devicetree-discuss, linux-tegra,
linux-arm-kernel, linux-kernel, Belisko Marek, Jamie Iles,
Shawn Guo, Sergei Shtylyov, Linus Walleij, Stephen Warren
The Tegra GPIO driver will be converted from static registration via
postcore_initcall() to be a platform device later in this patch series.
A new Tegra pinmux platform device will also be added.
Prepare for this by modifying all boards to register the appropriate
platform devices before-hand, so that when the drivers are converted,
those devices will be probed, and git bisectability will be maintained.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
---
arch/arm/mach-tegra/board-harmony-pinmux.c | 8 ++++++++
arch/arm/mach-tegra/board-paz00-pinmux.c | 8 ++++++++
arch/arm/mach-tegra/board-seaboard-pinmux.c | 9 +++++++--
arch/arm/mach-tegra/board-trimslice-pinmux.c | 7 +++++++
arch/arm/mach-tegra/devices.c | 10 ++++++++++
arch/arm/mach-tegra/devices.h | 2 ++
6 files changed, 42 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-tegra/board-harmony-pinmux.c b/arch/arm/mach-tegra/board-harmony-pinmux.c
index 4d63e2e..e99b456 100644
--- a/arch/arm/mach-tegra/board-harmony-pinmux.c
+++ b/arch/arm/mach-tegra/board-harmony-pinmux.c
@@ -20,6 +20,7 @@
#include "gpio-names.h"
#include "board-harmony.h"
+#include "devices.h"
static struct tegra_pingroup_config harmony_pinmux[] = {
{TEGRA_PINGROUP_ATA, TEGRA_MUX_IDE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
@@ -140,6 +141,11 @@ static struct tegra_pingroup_config harmony_pinmux[] = {
{TEGRA_PINGROUP_XM2D, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
};
+static struct platform_device *pinmux_devices[] = {
+ &tegra_gpio_device,
+ &tegra_pinmux_device,
+};
+
static struct tegra_gpio_table gpio_table[] = {
{ .gpio = TEGRA_GPIO_SD2_CD, .enable = true },
{ .gpio = TEGRA_GPIO_SD2_WP, .enable = true },
@@ -155,6 +161,8 @@ static struct tegra_gpio_table gpio_table[] = {
void harmony_pinmux_init(void)
{
+ platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
+
tegra_pinmux_config_table(harmony_pinmux, ARRAY_SIZE(harmony_pinmux));
tegra_gpio_config(gpio_table, ARRAY_SIZE(gpio_table));
diff --git a/arch/arm/mach-tegra/board-paz00-pinmux.c b/arch/arm/mach-tegra/board-paz00-pinmux.c
index bdd2627..43633f4 100644
--- a/arch/arm/mach-tegra/board-paz00-pinmux.c
+++ b/arch/arm/mach-tegra/board-paz00-pinmux.c
@@ -20,6 +20,7 @@
#include "gpio-names.h"
#include "board-paz00.h"
+#include "devices.h"
static struct tegra_pingroup_config paz00_pinmux[] = {
{TEGRA_PINGROUP_ATA, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
@@ -140,6 +141,11 @@ static struct tegra_pingroup_config paz00_pinmux[] = {
{TEGRA_PINGROUP_XM2D, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
};
+static struct platform_device *pinmux_devices[] = {
+ &tegra_gpio_device,
+ &tegra_pinmux_device,
+};
+
static struct tegra_gpio_table gpio_table[] = {
{ .gpio = TEGRA_GPIO_SD1_CD, .enable = true },
{ .gpio = TEGRA_GPIO_SD1_WP, .enable = true },
@@ -149,6 +155,8 @@ static struct tegra_gpio_table gpio_table[] = {
void paz00_pinmux_init(void)
{
+ platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
+
tegra_pinmux_config_table(paz00_pinmux, ARRAY_SIZE(paz00_pinmux));
tegra_gpio_config(gpio_table, ARRAY_SIZE(gpio_table));
diff --git a/arch/arm/mach-tegra/board-seaboard-pinmux.c b/arch/arm/mach-tegra/board-seaboard-pinmux.c
index 74f78b7..f092298 100644
--- a/arch/arm/mach-tegra/board-seaboard-pinmux.c
+++ b/arch/arm/mach-tegra/board-seaboard-pinmux.c
@@ -21,6 +21,7 @@
#include "gpio-names.h"
#include "board-seaboard.h"
+#include "devices.h"
#define DEFAULT_DRIVE(_name) \
{ \
@@ -157,8 +158,10 @@ static __initdata struct tegra_pingroup_config seaboard_pinmux[] = {
{TEGRA_PINGROUP_XM2D, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
};
-
-
+static struct platform_device *pinmux_devices[] = {
+ &tegra_gpio_device,
+ &tegra_pinmux_device,
+};
static struct tegra_gpio_table gpio_table[] = {
{ .gpio = TEGRA_GPIO_SD2_CD, .enable = true },
@@ -173,6 +176,8 @@ static struct tegra_gpio_table gpio_table[] = {
void __init seaboard_pinmux_init(void)
{
+ platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
+
tegra_pinmux_config_table(seaboard_pinmux, ARRAY_SIZE(seaboard_pinmux));
tegra_drive_pinmux_config_table(seaboard_drive_pinmux,
diff --git a/arch/arm/mach-tegra/board-trimslice-pinmux.c b/arch/arm/mach-tegra/board-trimslice-pinmux.c
index bcb1916..4969dd2 100644
--- a/arch/arm/mach-tegra/board-trimslice-pinmux.c
+++ b/arch/arm/mach-tegra/board-trimslice-pinmux.c
@@ -21,6 +21,7 @@
#include "gpio-names.h"
#include "board-trimslice.h"
+#include "devices.h"
static __initdata struct tegra_pingroup_config trimslice_pinmux[] = {
{TEGRA_PINGROUP_ATA, TEGRA_MUX_IDE, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
@@ -141,6 +142,11 @@ static __initdata struct tegra_pingroup_config trimslice_pinmux[] = {
{TEGRA_PINGROUP_XM2D, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
};
+static struct platform_device *pinmux_devices[] = {
+ &tegra_gpio_device,
+ &tegra_pinmux_device,
+};
+
static struct tegra_gpio_table gpio_table[] = {
{ .gpio = TRIMSLICE_GPIO_SD4_CD, .enable = true }, /* mmc4 cd */
{ .gpio = TRIMSLICE_GPIO_SD4_WP, .enable = true }, /* mmc4 wp */
@@ -151,6 +157,7 @@ static struct tegra_gpio_table gpio_table[] = {
void __init trimslice_pinmux_init(void)
{
+ platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
tegra_pinmux_config_table(trimslice_pinmux, ARRAY_SIZE(trimslice_pinmux));
tegra_gpio_config(gpio_table, ARRAY_SIZE(gpio_table));
}
diff --git a/arch/arm/mach-tegra/devices.c b/arch/arm/mach-tegra/devices.c
index 57e35d2..48262bf 100644
--- a/arch/arm/mach-tegra/devices.c
+++ b/arch/arm/mach-tegra/devices.c
@@ -31,6 +31,16 @@
#include <mach/usb_phy.h>
#include "gpio-names.h"
+struct platform_device tegra_gpio_device = {
+ .name = "tegra-gpio",
+ .id = -1,
+};
+
+struct platform_device tegra_pinmux_device = {
+ .name = "tegra-pinmux",
+ .id = -1,
+};
+
static struct resource i2c_resource1[] = {
[0] = {
.start = INT_I2C,
diff --git a/arch/arm/mach-tegra/devices.h b/arch/arm/mach-tegra/devices.h
index 4a7dc0a..873ecb2 100644
--- a/arch/arm/mach-tegra/devices.h
+++ b/arch/arm/mach-tegra/devices.h
@@ -21,6 +21,8 @@
#include <linux/platform_device.h>
+extern struct platform_device tegra_gpio_device;
+extern struct platform_device tegra_pinmux_device;
extern struct platform_device tegra_sdhci_device1;
extern struct platform_device tegra_sdhci_device2;
extern struct platform_device tegra_sdhci_device3;
--
1.7.0.4
^ permalink raw reply related [flat|nested] 69+ messages in thread
* [PATCH v3 02/13] docs/dt: Document nvidia, tegra20-gpio's nvidia, enabled-gpios property
2011-08-25 23:43 ` Stephen Warren
(?)
@ 2011-08-25 23:43 ` Stephen Warren
-1 siblings, 0 replies; 69+ messages in thread
From: Stephen Warren @ 2011-08-25 23:43 UTC (permalink / raw)
To: Grant Likely, Colin Cross, Erik Gilling, Olof Johansson
Cc: Russell King, Sergei Shtylyov, Belisko Marek,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-tegra-u79uwXL29TY76Z2rM5mHXA, Linus Walleij,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Signed-off-by: Stephen Warren <swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
.../devicetree/bindings/gpio/gpio_nvidia.txt | 20 ++++++++++++++++++++
1 files changed, 20 insertions(+), 0 deletions(-)
diff --git a/Documentation/devicetree/bindings/gpio/gpio_nvidia.txt b/Documentation/devicetree/bindings/gpio/gpio_nvidia.txt
index eb4b530..b22fff3 100644
--- a/Documentation/devicetree/bindings/gpio/gpio_nvidia.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio_nvidia.txt
@@ -6,3 +6,23 @@ Required properties:
second cell is used to specify optional parameters:
- bit 0 specifies polarity (0 for normal, 1 for inverted)
- gpio-controller : Marks the device node as a GPIO controller.
+
+Optional properties:
+- nvidia,enabled-gpios : The list of GPIOs that should be controlled by the
+ GPIO controller rather than the pinmux controller.
+
+Example of a gpio-controller node:
+
+ gpio: gpio@6000d000 {
+ compatible = "nvidia,tegra20-gpio";
+ reg = < 0x6000d000 0x1000 >;
+ interrupts = < 64 65 66 67 87 119 121 >;
+ #gpio-cells = <2>;
+ gpio-controller;
+ nvidia,enabled-gpios = <
+ 69 // TEGRA_GPIO_PI5 SD2_CD
+ 57 // TEGRA_GPIO_PH1 SD2_WP
+ 155 // TEGRA_GPIO_PT3 SD2_POWER
+ >;
+ };
+
--
1.7.0.4
^ permalink raw reply related [flat|nested] 69+ messages in thread* [PATCH v3 02/13] docs/dt: Document nvidia, tegra20-gpio's nvidia, enabled-gpios property
@ 2011-08-25 23:43 ` Stephen Warren
0 siblings, 0 replies; 69+ messages in thread
From: Stephen Warren @ 2011-08-25 23:43 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Stephen Warren <swarren@nvidia.com>
---
.../devicetree/bindings/gpio/gpio_nvidia.txt | 20 ++++++++++++++++++++
1 files changed, 20 insertions(+), 0 deletions(-)
diff --git a/Documentation/devicetree/bindings/gpio/gpio_nvidia.txt b/Documentation/devicetree/bindings/gpio/gpio_nvidia.txt
index eb4b530..b22fff3 100644
--- a/Documentation/devicetree/bindings/gpio/gpio_nvidia.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio_nvidia.txt
@@ -6,3 +6,23 @@ Required properties:
second cell is used to specify optional parameters:
- bit 0 specifies polarity (0 for normal, 1 for inverted)
- gpio-controller : Marks the device node as a GPIO controller.
+
+Optional properties:
+- nvidia,enabled-gpios : The list of GPIOs that should be controlled by the
+ GPIO controller rather than the pinmux controller.
+
+Example of a gpio-controller node:
+
+ gpio: gpio at 6000d000 {
+ compatible = "nvidia,tegra20-gpio";
+ reg = < 0x6000d000 0x1000 >;
+ interrupts = < 64 65 66 67 87 119 121 >;
+ #gpio-cells = <2>;
+ gpio-controller;
+ nvidia,enabled-gpios = <
+ 69 // TEGRA_GPIO_PI5 SD2_CD
+ 57 // TEGRA_GPIO_PH1 SD2_WP
+ 155 // TEGRA_GPIO_PT3 SD2_POWER
+ >;
+ };
+
--
1.7.0.4
^ permalink raw reply related [flat|nested] 69+ messages in thread* [PATCH v3 02/13] docs/dt: Document nvidia,tegra20-gpio's nvidia,enabled-gpios property
@ 2011-08-25 23:43 ` Stephen Warren
0 siblings, 0 replies; 69+ messages in thread
From: Stephen Warren @ 2011-08-25 23:43 UTC (permalink / raw)
To: Grant Likely, Colin Cross, Erik Gilling, Olof Johansson
Cc: Russell King, Arnd Bergmann, devicetree-discuss, linux-tegra,
linux-arm-kernel, linux-kernel, Belisko Marek, Jamie Iles,
Shawn Guo, Sergei Shtylyov, Linus Walleij, Stephen Warren
Signed-off-by: Stephen Warren <swarren@nvidia.com>
---
.../devicetree/bindings/gpio/gpio_nvidia.txt | 20 ++++++++++++++++++++
1 files changed, 20 insertions(+), 0 deletions(-)
diff --git a/Documentation/devicetree/bindings/gpio/gpio_nvidia.txt b/Documentation/devicetree/bindings/gpio/gpio_nvidia.txt
index eb4b530..b22fff3 100644
--- a/Documentation/devicetree/bindings/gpio/gpio_nvidia.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio_nvidia.txt
@@ -6,3 +6,23 @@ Required properties:
second cell is used to specify optional parameters:
- bit 0 specifies polarity (0 for normal, 1 for inverted)
- gpio-controller : Marks the device node as a GPIO controller.
+
+Optional properties:
+- nvidia,enabled-gpios : The list of GPIOs that should be controlled by the
+ GPIO controller rather than the pinmux controller.
+
+Example of a gpio-controller node:
+
+ gpio: gpio@6000d000 {
+ compatible = "nvidia,tegra20-gpio";
+ reg = < 0x6000d000 0x1000 >;
+ interrupts = < 64 65 66 67 87 119 121 >;
+ #gpio-cells = <2>;
+ gpio-controller;
+ nvidia,enabled-gpios = <
+ 69 // TEGRA_GPIO_PI5 SD2_CD
+ 57 // TEGRA_GPIO_PH1 SD2_WP
+ 155 // TEGRA_GPIO_PT3 SD2_POWER
+ >;
+ };
+
--
1.7.0.4
^ permalink raw reply related [flat|nested] 69+ messages in thread
* [PATCH v3 03/13] arm/dt: Tegra: Add nvidia, enabled-gpios property to GPIO controller
2011-08-25 23:43 ` Stephen Warren
(?)
@ 2011-08-25 23:43 ` Stephen Warren
-1 siblings, 0 replies; 69+ messages in thread
From: Stephen Warren @ 2011-08-25 23:43 UTC (permalink / raw)
To: Grant Likely, Colin Cross, Erik Gilling, Olof Johansson
Cc: Russell King, Sergei Shtylyov, Belisko Marek,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-tegra-u79uwXL29TY76Z2rM5mHXA, Linus Walleij,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Add board-specific gpio node for Harmony and Seaboard. This lists the
GPIOs used by the board. Note that not all GPIOs that exist on the board
are listed; only those used by devices currently supported by device
tree.
Signed-off-by: Stephen Warren <swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
arch/arm/boot/dts/tegra-harmony.dts | 15 +++++++++++++++
arch/arm/boot/dts/tegra-seaboard.dts | 8 ++++++++
2 files changed, 23 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/tegra-harmony.dts b/arch/arm/boot/dts/tegra-harmony.dts
index e581866..2bbe559 100644
--- a/arch/arm/boot/dts/tegra-harmony.dts
+++ b/arch/arm/boot/dts/tegra-harmony.dts
@@ -15,6 +15,21 @@
reg = < 0x00000000 0x40000000 >;
};
+ gpio: gpio@6000d000 {
+ nvidia,enabled-gpios = <
+ 69 // TEGRA_GPIO_PI5 SD2_CD
+ 57 // TEGRA_GPIO_PH1 SD2_WP
+ 155 // TEGRA_GPIO_PT3 SD2_POWER
+ 58 // TEGRA_GPIO_PH2 SD4_CD
+ 59 // TEGRA_GPIO_PH3 SD4_WP
+ 70 // TEGRA_GPIO_PI6 SD4_POWER
+ 187 // TEGRA_GPIO_PX3 CDC_IRQ
+ 178 // TEGRA_GPIO_PW2 HP_DET
+ 184 // TEGRA_GPIO_PX0 INT_MIC_EN
+ 185 // TEGRA_GPIO_PX1 EXT_MIC_EN
+ >;
+ };
+
i2c@7000c000 {
clock-frequency = <400000>;
diff --git a/arch/arm/boot/dts/tegra-seaboard.dts b/arch/arm/boot/dts/tegra-seaboard.dts
index 64cedca..ec8f8cf 100644
--- a/arch/arm/boot/dts/tegra-seaboard.dts
+++ b/arch/arm/boot/dts/tegra-seaboard.dts
@@ -16,6 +16,14 @@
reg = < 0x00000000 0x40000000 >;
};
+ gpio: gpio@6000d000 {
+ nvidia,enabled-gpios = <
+ 69 // TEGRA_GPIO_PI5 SD2_CD
+ 57 // TEGRA_GPIO_PH1 SD2_WP
+ 70 // TEGRA_GPIO_PI6 SD2_POWER
+ >;
+ };
+
serial@70006300 {
clock-frequency = < 216000000 >;
};
--
1.7.0.4
^ permalink raw reply related [flat|nested] 69+ messages in thread* [PATCH v3 03/13] arm/dt: Tegra: Add nvidia, enabled-gpios property to GPIO controller
@ 2011-08-25 23:43 ` Stephen Warren
0 siblings, 0 replies; 69+ messages in thread
From: Stephen Warren @ 2011-08-25 23:43 UTC (permalink / raw)
To: linux-arm-kernel
Add board-specific gpio node for Harmony and Seaboard. This lists the
GPIOs used by the board. Note that not all GPIOs that exist on the board
are listed; only those used by devices currently supported by device
tree.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
---
arch/arm/boot/dts/tegra-harmony.dts | 15 +++++++++++++++
arch/arm/boot/dts/tegra-seaboard.dts | 8 ++++++++
2 files changed, 23 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/tegra-harmony.dts b/arch/arm/boot/dts/tegra-harmony.dts
index e581866..2bbe559 100644
--- a/arch/arm/boot/dts/tegra-harmony.dts
+++ b/arch/arm/boot/dts/tegra-harmony.dts
@@ -15,6 +15,21 @@
reg = < 0x00000000 0x40000000 >;
};
+ gpio: gpio at 6000d000 {
+ nvidia,enabled-gpios = <
+ 69 // TEGRA_GPIO_PI5 SD2_CD
+ 57 // TEGRA_GPIO_PH1 SD2_WP
+ 155 // TEGRA_GPIO_PT3 SD2_POWER
+ 58 // TEGRA_GPIO_PH2 SD4_CD
+ 59 // TEGRA_GPIO_PH3 SD4_WP
+ 70 // TEGRA_GPIO_PI6 SD4_POWER
+ 187 // TEGRA_GPIO_PX3 CDC_IRQ
+ 178 // TEGRA_GPIO_PW2 HP_DET
+ 184 // TEGRA_GPIO_PX0 INT_MIC_EN
+ 185 // TEGRA_GPIO_PX1 EXT_MIC_EN
+ >;
+ };
+
i2c at 7000c000 {
clock-frequency = <400000>;
diff --git a/arch/arm/boot/dts/tegra-seaboard.dts b/arch/arm/boot/dts/tegra-seaboard.dts
index 64cedca..ec8f8cf 100644
--- a/arch/arm/boot/dts/tegra-seaboard.dts
+++ b/arch/arm/boot/dts/tegra-seaboard.dts
@@ -16,6 +16,14 @@
reg = < 0x00000000 0x40000000 >;
};
+ gpio: gpio at 6000d000 {
+ nvidia,enabled-gpios = <
+ 69 // TEGRA_GPIO_PI5 SD2_CD
+ 57 // TEGRA_GPIO_PH1 SD2_WP
+ 70 // TEGRA_GPIO_PI6 SD2_POWER
+ >;
+ };
+
serial at 70006300 {
clock-frequency = < 216000000 >;
};
--
1.7.0.4
^ permalink raw reply related [flat|nested] 69+ messages in thread* [PATCH v3 03/13] arm/dt: Tegra: Add nvidia,enabled-gpios property to GPIO controller
@ 2011-08-25 23:43 ` Stephen Warren
0 siblings, 0 replies; 69+ messages in thread
From: Stephen Warren @ 2011-08-25 23:43 UTC (permalink / raw)
To: Grant Likely, Colin Cross, Erik Gilling, Olof Johansson
Cc: Russell King, Arnd Bergmann, devicetree-discuss, linux-tegra,
linux-arm-kernel, linux-kernel, Belisko Marek, Jamie Iles,
Shawn Guo, Sergei Shtylyov, Linus Walleij, Stephen Warren
Add board-specific gpio node for Harmony and Seaboard. This lists the
GPIOs used by the board. Note that not all GPIOs that exist on the board
are listed; only those used by devices currently supported by device
tree.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
---
arch/arm/boot/dts/tegra-harmony.dts | 15 +++++++++++++++
arch/arm/boot/dts/tegra-seaboard.dts | 8 ++++++++
2 files changed, 23 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/tegra-harmony.dts b/arch/arm/boot/dts/tegra-harmony.dts
index e581866..2bbe559 100644
--- a/arch/arm/boot/dts/tegra-harmony.dts
+++ b/arch/arm/boot/dts/tegra-harmony.dts
@@ -15,6 +15,21 @@
reg = < 0x00000000 0x40000000 >;
};
+ gpio: gpio@6000d000 {
+ nvidia,enabled-gpios = <
+ 69 // TEGRA_GPIO_PI5 SD2_CD
+ 57 // TEGRA_GPIO_PH1 SD2_WP
+ 155 // TEGRA_GPIO_PT3 SD2_POWER
+ 58 // TEGRA_GPIO_PH2 SD4_CD
+ 59 // TEGRA_GPIO_PH3 SD4_WP
+ 70 // TEGRA_GPIO_PI6 SD4_POWER
+ 187 // TEGRA_GPIO_PX3 CDC_IRQ
+ 178 // TEGRA_GPIO_PW2 HP_DET
+ 184 // TEGRA_GPIO_PX0 INT_MIC_EN
+ 185 // TEGRA_GPIO_PX1 EXT_MIC_EN
+ >;
+ };
+
i2c@7000c000 {
clock-frequency = <400000>;
diff --git a/arch/arm/boot/dts/tegra-seaboard.dts b/arch/arm/boot/dts/tegra-seaboard.dts
index 64cedca..ec8f8cf 100644
--- a/arch/arm/boot/dts/tegra-seaboard.dts
+++ b/arch/arm/boot/dts/tegra-seaboard.dts
@@ -16,6 +16,14 @@
reg = < 0x00000000 0x40000000 >;
};
+ gpio: gpio@6000d000 {
+ nvidia,enabled-gpios = <
+ 69 // TEGRA_GPIO_PI5 SD2_CD
+ 57 // TEGRA_GPIO_PH1 SD2_WP
+ 70 // TEGRA_GPIO_PI6 SD2_POWER
+ >;
+ };
+
serial@70006300 {
clock-frequency = < 216000000 >;
};
--
1.7.0.4
^ permalink raw reply related [flat|nested] 69+ messages in thread
* [PATCH v3 05/13] arm/dt: Tegra: Add pinmux node
2011-08-25 23:43 ` Stephen Warren
(?)
@ 2011-08-25 23:43 ` Stephen Warren
-1 siblings, 0 replies; 69+ messages in thread
From: Stephen Warren @ 2011-08-25 23:43 UTC (permalink / raw)
To: Grant Likely, Colin Cross, Erik Gilling, Olof Johansson
Cc: Russell King, Sergei Shtylyov, Belisko Marek,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-tegra-u79uwXL29TY76Z2rM5mHXA, Linus Walleij,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Add a pinmux node to tegra20.dtsi in order to instantiate the future
pinmux device. Add pinmux nodes to Harmony and Seaboard, which detail
the entire initial pinmux configuration. This configuration is identical
to that in board-harmony/seaboard-pinmux.c.
Signed-off-by: Stephen Warren <swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
arch/arm/boot/dts/tegra-harmony.dts | 243 ++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/tegra-seaboard.dts | 239 +++++++++++++++++++++++++++++++++
arch/arm/boot/dts/tegra20.dtsi | 5 +
3 files changed, 487 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/tegra-harmony.dts b/arch/arm/boot/dts/tegra-harmony.dts
index 2bbe559..a2b8dec 100644
--- a/arch/arm/boot/dts/tegra-harmony.dts
+++ b/arch/arm/boot/dts/tegra-harmony.dts
@@ -30,6 +30,249 @@
>;
};
+ pinmux: pinmux@70000000 {
+ nvidia,mux-groups {
+ ata {
+ pins = "ata";
+ function = "ide";
+ };
+ atb {
+ pins = "atb", "gma", "gme";
+ function = "sdio4";
+ };
+ atc {
+ pins = "atc";
+ function = "nand";
+ };
+ atd {
+ pins = "atd", "ate", "gmb", "gmd", "spia", "spib";
+ function = "gmi";
+ };
+ cdev1 {
+ pins = "cdev1";
+ function = "plla_out";
+ };
+ cdev2 {
+ pins = "cdev2";
+ function = "pllp_out4";
+ pull-down;
+ tristate;
+ };
+ ck32 {
+ pins = "ck32", "ddrc", "pmca", "pmcb", "pmcc", "pmcd", "pmce", "xm2c", "xm2d";
+ function = "none";
+ };
+ crtp {
+ pins = "crtp";
+ function = "crt";
+ tristate;
+ };
+ csus {
+ pins = "csus";
+ function = "vi_sensor_clk";
+ pull-down;
+ tristate;
+ };
+ dap1 {
+ pins = "dap1";
+ function = "dap1";
+ };
+ dap2 {
+ pins = "dap2";
+ function = "dap2";
+ tristate;
+ };
+ dap3 {
+ pins = "dap3";
+ function = "dap3";
+ tristate;
+ };
+ dap4 {
+ pins = "dap4";
+ function = "dap4";
+ tristate;
+ };
+ ddc {
+ pins = "ddc";
+ function = "i2c2";
+ pull-up;
+ };
+ dta {
+ pins = "dta", "dtd";
+ function = "sdio2";
+ pull-up;
+ };
+ dtb {
+ pins = "dtb";
+ function = "rsvd1";
+ };
+ dtc {
+ pins = "dtc", "dte";
+ function = "rsvd1";
+ tristate;
+ };
+ dtf {
+ pins = "dtf";
+ function = "i2c3";
+ tristate;
+ };
+ gmc {
+ pins = "gmc";
+ function = "uartd";
+ };
+ gpu {
+ pins = "gpu";
+ function = "gmi";
+ tristate;
+ };
+ gpu7 {
+ pins = "gpu7";
+ function = "rtck";
+ };
+ gpv {
+ pins = "gpv", "slxa", "slxk";
+ function = "pcie";
+ tristate;
+ };
+ hdint {
+ pins = "hdint";
+ function = "hdmi";
+ pull-up;
+ tristate;
+ };
+ i2cp {
+ pins = "i2cp", "rm";
+ function = "i2c";
+ };
+ irrx {
+ pins = "irrx", "irtx";
+ function = "uarta";
+ pull-up;
+ tristate;
+ };
+ kbca {
+ pins = "kbca", "kbcb", "kbcc", "kbcd", "kbce", "kbcf";
+ function = "kbc";
+ pull-up;
+ };
+ lcsn {
+ pins = "lcsn", "ldc", "lm1", "lpw1", "lsc1", "lsck", "lsda", "lsdi", "lvp0";
+ function = "displaya";
+ pull-up;
+ tristate;
+ };
+ ld0 {
+ pins = "ld0", "ld1", "ld10", "ld11", "ld12", "ld13", "ld14", "ld15", "ld16", "ld17", "ld2", "ld3", "ld4", "ld5", "ld6", "ld7", "ld8", "ld9", "ldi", "lhp0", "lhp1", "lhp2", "lpp", "lvp1";
+ function = "displaya";
+ pull-down;
+ };
+ lhs {
+ pins = "lhs", "lm0", "lpw0", "lpw2", "lsc0", "lspi", "lvs";
+ function = "displaya";
+ pull-up;
+ };
+ owc {
+ pins = "owc";
+ function = "rsvd2";
+ pull-up;
+ tristate;
+ };
+ pmc {
+ pins = "pmc";
+ function = "pwr_on";
+ };
+ pta {
+ pins = "pta";
+ function = "hdmi";
+ };
+ sdb {
+ pins = "sdb";
+ function = "pwm";
+ tristate;
+ };
+ sdc {
+ pins = "sdc";
+ function = "pwm";
+ pull-up;
+ };
+ sdd {
+ pins = "sdd";
+ function = "pwm";
+ pull-up;
+ tristate;
+ };
+ sdio1 {
+ pins = "sdio1";
+ function = "sdio1";
+ tristate;
+ };
+ slxc {
+ pins = "slxc", "slxd";
+ function = "spdif";
+ tristate;
+ };
+ spdi {
+ pins = "spdi", "spdo", "uac";
+ function = "rsvd2";
+ tristate;
+ };
+ spic {
+ pins = "spic";
+ function = "gmi";
+ pull-up;
+ tristate;
+ };
+ spid {
+ pins = "spid", "spif";
+ function = "spi1";
+ pull-down;
+ tristate;
+ };
+ spie {
+ pins = "spie";
+ function = "spi1";
+ pull-up;
+ tristate;
+ };
+ spig {
+ pins = "spig";
+ function = "spi2_alt";
+ tristate;
+ };
+ spih {
+ pins = "spih";
+ function = "spi2_alt";
+ pull-up;
+ tristate;
+ };
+ uaa {
+ pins = "uaa", "uab";
+ function = "ulpi";
+ pull-up;
+ tristate;
+ };
+ uad {
+ pins = "uad";
+ function = "irda";
+ pull-up;
+ tristate;
+ };
+ uca {
+ pins = "uca", "ucb";
+ function = "uartc";
+ pull-up;
+ tristate;
+ };
+ uda {
+ pins = "uda";
+ function = "ulpi";
+ tristate;
+ };
+ };
+ nvidia,drive-groups {
+ };
+ };
+
i2c@7000c000 {
clock-frequency = <400000>;
diff --git a/arch/arm/boot/dts/tegra-seaboard.dts b/arch/arm/boot/dts/tegra-seaboard.dts
index ec8f8cf..b0677b2 100644
--- a/arch/arm/boot/dts/tegra-seaboard.dts
+++ b/arch/arm/boot/dts/tegra-seaboard.dts
@@ -24,6 +24,245 @@
>;
};
+ pinmux: pinmux@70000000 {
+ nvidia,mux-groups {
+ ata {
+ pins = "ata";
+ function = "ide";
+ };
+ atb {
+ pins = "atb", "gma", "gme";
+ function = "sdio4";
+ };
+ atc {
+ pins = "atc";
+ function = "nand";
+ };
+ atd {
+ pins = "atd";
+ function = "gmi";
+ };
+ ate {
+ pins = "ate", "spib";
+ function = "gmi";
+ tristate;
+ };
+ cdev1 {
+ pins = "cdev1";
+ function = "plla_out";
+ };
+ cdev2 {
+ pins = "cdev2";
+ function = "pllp_out4";
+ };
+ ck32 {
+ pins = "ck32", "ddrc", "pmca", "pmcb", "pmcc", "pmcd", "pmce", "xm2c", "xm2d";
+ function = "none";
+ };
+ crtp {
+ pins = "crtp";
+ function = "crt";
+ pull-up;
+ tristate;
+ };
+ csus {
+ pins = "csus";
+ function = "vi_sensor_clk";
+ tristate;
+ };
+ dap1 {
+ pins = "dap1";
+ function = "dap1";
+ };
+ dap2 {
+ pins = "dap2";
+ function = "dap2";
+ };
+ dap3 {
+ pins = "dap3";
+ function = "dap3";
+ tristate;
+ };
+ dap4 {
+ pins = "dap4";
+ function = "dap4";
+ };
+ ddc {
+ pins = "ddc", "owc";
+ function = "rsvd2";
+ tristate;
+ };
+ dta {
+ pins = "dta", "dtb", "dtc", "dtd";
+ function = "vi";
+ pull-down;
+ };
+ dte {
+ pins = "dte";
+ function = "vi";
+ pull-down;
+ tristate;
+ };
+ dtf {
+ pins = "dtf";
+ function = "i2c3";
+ };
+ gmb {
+ pins = "gmb", "spia";
+ function = "gmi";
+ pull-up;
+ tristate;
+ };
+ gmc {
+ pins = "gmc";
+ function = "uartd";
+ };
+ gmd {
+ pins = "gmd";
+ function = "sflash";
+ };
+ gpu {
+ pins = "gpu";
+ function = "pwm";
+ };
+ gpu7 {
+ pins = "gpu7";
+ function = "rtck";
+ };
+ gpv {
+ pins = "gpv";
+ function = "pcie";
+ tristate;
+ };
+ hdint {
+ pins = "hdint", "lsc1", "lsck", "lsda";
+ function = "hdmi";
+ tristate;
+ };
+ i2cp {
+ pins = "i2cp", "rm";
+ function = "i2c";
+ };
+ irrx {
+ pins = "irrx", "irtx";
+ function = "uartb";
+ };
+ kbca {
+ pins = "kbca", "kbcb", "kbcc", "kbcd", "kbce", "kbcf";
+ function = "kbc";
+ pull-up;
+ };
+ lcsn {
+ pins = "lcsn", "ldc", "lpw1", "lsdi", "lvp0";
+ function = "rsvd4";
+ tristate;
+ };
+ ld0 {
+ pins = "ld0", "ld1", "ld10", "ld11", "ld12", "ld13", "ld14", "ld15", "ld16", "ld17", "ld2", "ld3", "ld4", "ld5", "ld6", "ld7", "ld8", "ld9", "ldi", "lhp0", "lhp1", "lhp2", "lhs", "lpp", "lsc0", "lspi", "lvp1", "lvs";
+ function = "displaya";
+ };
+ lm0 {
+ pins = "lm0";
+ function = "rsvd4";
+ };
+ lm1 {
+ pins = "lm1";
+ function = "crt";
+ tristate;
+ };
+ lpw0 {
+ pins = "lpw0", "lpw2", "pta";
+ function = "hdmi";
+ };
+ pmc {
+ pins = "pmc";
+ function = "pwr_on";
+ };
+ sdb {
+ pins = "sdb", "sdc", "sdd";
+ function = "sdio3";
+ };
+ sdio1 {
+ pins = "sdio1";
+ function = "sdio1";
+ pull-up;
+ };
+ slxa {
+ pins = "slxa";
+ function = "pcie";
+ pull-up;
+ tristate;
+ };
+ slxc {
+ pins = "slxc";
+ function = "spdif";
+ tristate;
+ };
+ slxd {
+ pins = "slxd";
+ function = "spdif";
+ };
+ slxk {
+ pins = "slxk";
+ function = "pcie";
+ };
+ spdi {
+ pins = "spdi", "spdo", "uac";
+ function = "rsvd2";
+ };
+ spic {
+ pins = "spic";
+ function = "gmi";
+ pull-up;
+ };
+ spid {
+ pins = "spid", "spie";
+ function = "spi1";
+ tristate;
+ };
+ spif {
+ pins = "spif";
+ function = "spi1";
+ pull-down;
+ tristate;
+ };
+ spig {
+ pins = "spig", "spih";
+ function = "spi2_alt";
+ pull-up;
+ tristate;
+ };
+ uaa {
+ pins = "uaa", "uab";
+ function = "ulpi";
+ pull-up;
+ };
+ uad {
+ pins = "uad";
+ function = "irda";
+ };
+ uca {
+ pins = "uca", "ucb";
+ function = "uartc";
+ };
+ uda {
+ pins = "uda";
+ function = "ulpi";
+ };
+ };
+ nvidia,drive-groups {
+ sdio1 {
+ pins = "sdio1";
+ nvidia,schmitt;
+ nvidia,drive-power = <3>;
+ nvidia,pull-down-strength = <31>;
+ nvidia,pull-up-strength = <31>;
+ nvidia,slew-rate-rising = <3>;
+ nvidia,slew-rate-falling = <3>;
+ };
+ };
+ };
+
serial@70006300 {
clock-frequency = < 216000000 >;
};
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index 5727595..5921c1d 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -77,6 +77,11 @@
gpio-controller;
};
+ pinmux: pinmux@70000000 {
+ compatible = "nvidia,tegra20-pinmux";
+ reg = < 0x70000000 0xc00 >;
+ };
+
serial@70006000 {
compatible = "nvidia,tegra20-uart";
reg = <0x70006000 0x40>;
--
1.7.0.4
^ permalink raw reply related [flat|nested] 69+ messages in thread* [PATCH v3 05/13] arm/dt: Tegra: Add pinmux node
@ 2011-08-25 23:43 ` Stephen Warren
0 siblings, 0 replies; 69+ messages in thread
From: Stephen Warren @ 2011-08-25 23:43 UTC (permalink / raw)
To: linux-arm-kernel
Add a pinmux node to tegra20.dtsi in order to instantiate the future
pinmux device. Add pinmux nodes to Harmony and Seaboard, which detail
the entire initial pinmux configuration. This configuration is identical
to that in board-harmony/seaboard-pinmux.c.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
---
arch/arm/boot/dts/tegra-harmony.dts | 243 ++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/tegra-seaboard.dts | 239 +++++++++++++++++++++++++++++++++
arch/arm/boot/dts/tegra20.dtsi | 5 +
3 files changed, 487 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/tegra-harmony.dts b/arch/arm/boot/dts/tegra-harmony.dts
index 2bbe559..a2b8dec 100644
--- a/arch/arm/boot/dts/tegra-harmony.dts
+++ b/arch/arm/boot/dts/tegra-harmony.dts
@@ -30,6 +30,249 @@
>;
};
+ pinmux: pinmux at 70000000 {
+ nvidia,mux-groups {
+ ata {
+ pins = "ata";
+ function = "ide";
+ };
+ atb {
+ pins = "atb", "gma", "gme";
+ function = "sdio4";
+ };
+ atc {
+ pins = "atc";
+ function = "nand";
+ };
+ atd {
+ pins = "atd", "ate", "gmb", "gmd", "spia", "spib";
+ function = "gmi";
+ };
+ cdev1 {
+ pins = "cdev1";
+ function = "plla_out";
+ };
+ cdev2 {
+ pins = "cdev2";
+ function = "pllp_out4";
+ pull-down;
+ tristate;
+ };
+ ck32 {
+ pins = "ck32", "ddrc", "pmca", "pmcb", "pmcc", "pmcd", "pmce", "xm2c", "xm2d";
+ function = "none";
+ };
+ crtp {
+ pins = "crtp";
+ function = "crt";
+ tristate;
+ };
+ csus {
+ pins = "csus";
+ function = "vi_sensor_clk";
+ pull-down;
+ tristate;
+ };
+ dap1 {
+ pins = "dap1";
+ function = "dap1";
+ };
+ dap2 {
+ pins = "dap2";
+ function = "dap2";
+ tristate;
+ };
+ dap3 {
+ pins = "dap3";
+ function = "dap3";
+ tristate;
+ };
+ dap4 {
+ pins = "dap4";
+ function = "dap4";
+ tristate;
+ };
+ ddc {
+ pins = "ddc";
+ function = "i2c2";
+ pull-up;
+ };
+ dta {
+ pins = "dta", "dtd";
+ function = "sdio2";
+ pull-up;
+ };
+ dtb {
+ pins = "dtb";
+ function = "rsvd1";
+ };
+ dtc {
+ pins = "dtc", "dte";
+ function = "rsvd1";
+ tristate;
+ };
+ dtf {
+ pins = "dtf";
+ function = "i2c3";
+ tristate;
+ };
+ gmc {
+ pins = "gmc";
+ function = "uartd";
+ };
+ gpu {
+ pins = "gpu";
+ function = "gmi";
+ tristate;
+ };
+ gpu7 {
+ pins = "gpu7";
+ function = "rtck";
+ };
+ gpv {
+ pins = "gpv", "slxa", "slxk";
+ function = "pcie";
+ tristate;
+ };
+ hdint {
+ pins = "hdint";
+ function = "hdmi";
+ pull-up;
+ tristate;
+ };
+ i2cp {
+ pins = "i2cp", "rm";
+ function = "i2c";
+ };
+ irrx {
+ pins = "irrx", "irtx";
+ function = "uarta";
+ pull-up;
+ tristate;
+ };
+ kbca {
+ pins = "kbca", "kbcb", "kbcc", "kbcd", "kbce", "kbcf";
+ function = "kbc";
+ pull-up;
+ };
+ lcsn {
+ pins = "lcsn", "ldc", "lm1", "lpw1", "lsc1", "lsck", "lsda", "lsdi", "lvp0";
+ function = "displaya";
+ pull-up;
+ tristate;
+ };
+ ld0 {
+ pins = "ld0", "ld1", "ld10", "ld11", "ld12", "ld13", "ld14", "ld15", "ld16", "ld17", "ld2", "ld3", "ld4", "ld5", "ld6", "ld7", "ld8", "ld9", "ldi", "lhp0", "lhp1", "lhp2", "lpp", "lvp1";
+ function = "displaya";
+ pull-down;
+ };
+ lhs {
+ pins = "lhs", "lm0", "lpw0", "lpw2", "lsc0", "lspi", "lvs";
+ function = "displaya";
+ pull-up;
+ };
+ owc {
+ pins = "owc";
+ function = "rsvd2";
+ pull-up;
+ tristate;
+ };
+ pmc {
+ pins = "pmc";
+ function = "pwr_on";
+ };
+ pta {
+ pins = "pta";
+ function = "hdmi";
+ };
+ sdb {
+ pins = "sdb";
+ function = "pwm";
+ tristate;
+ };
+ sdc {
+ pins = "sdc";
+ function = "pwm";
+ pull-up;
+ };
+ sdd {
+ pins = "sdd";
+ function = "pwm";
+ pull-up;
+ tristate;
+ };
+ sdio1 {
+ pins = "sdio1";
+ function = "sdio1";
+ tristate;
+ };
+ slxc {
+ pins = "slxc", "slxd";
+ function = "spdif";
+ tristate;
+ };
+ spdi {
+ pins = "spdi", "spdo", "uac";
+ function = "rsvd2";
+ tristate;
+ };
+ spic {
+ pins = "spic";
+ function = "gmi";
+ pull-up;
+ tristate;
+ };
+ spid {
+ pins = "spid", "spif";
+ function = "spi1";
+ pull-down;
+ tristate;
+ };
+ spie {
+ pins = "spie";
+ function = "spi1";
+ pull-up;
+ tristate;
+ };
+ spig {
+ pins = "spig";
+ function = "spi2_alt";
+ tristate;
+ };
+ spih {
+ pins = "spih";
+ function = "spi2_alt";
+ pull-up;
+ tristate;
+ };
+ uaa {
+ pins = "uaa", "uab";
+ function = "ulpi";
+ pull-up;
+ tristate;
+ };
+ uad {
+ pins = "uad";
+ function = "irda";
+ pull-up;
+ tristate;
+ };
+ uca {
+ pins = "uca", "ucb";
+ function = "uartc";
+ pull-up;
+ tristate;
+ };
+ uda {
+ pins = "uda";
+ function = "ulpi";
+ tristate;
+ };
+ };
+ nvidia,drive-groups {
+ };
+ };
+
i2c at 7000c000 {
clock-frequency = <400000>;
diff --git a/arch/arm/boot/dts/tegra-seaboard.dts b/arch/arm/boot/dts/tegra-seaboard.dts
index ec8f8cf..b0677b2 100644
--- a/arch/arm/boot/dts/tegra-seaboard.dts
+++ b/arch/arm/boot/dts/tegra-seaboard.dts
@@ -24,6 +24,245 @@
>;
};
+ pinmux: pinmux at 70000000 {
+ nvidia,mux-groups {
+ ata {
+ pins = "ata";
+ function = "ide";
+ };
+ atb {
+ pins = "atb", "gma", "gme";
+ function = "sdio4";
+ };
+ atc {
+ pins = "atc";
+ function = "nand";
+ };
+ atd {
+ pins = "atd";
+ function = "gmi";
+ };
+ ate {
+ pins = "ate", "spib";
+ function = "gmi";
+ tristate;
+ };
+ cdev1 {
+ pins = "cdev1";
+ function = "plla_out";
+ };
+ cdev2 {
+ pins = "cdev2";
+ function = "pllp_out4";
+ };
+ ck32 {
+ pins = "ck32", "ddrc", "pmca", "pmcb", "pmcc", "pmcd", "pmce", "xm2c", "xm2d";
+ function = "none";
+ };
+ crtp {
+ pins = "crtp";
+ function = "crt";
+ pull-up;
+ tristate;
+ };
+ csus {
+ pins = "csus";
+ function = "vi_sensor_clk";
+ tristate;
+ };
+ dap1 {
+ pins = "dap1";
+ function = "dap1";
+ };
+ dap2 {
+ pins = "dap2";
+ function = "dap2";
+ };
+ dap3 {
+ pins = "dap3";
+ function = "dap3";
+ tristate;
+ };
+ dap4 {
+ pins = "dap4";
+ function = "dap4";
+ };
+ ddc {
+ pins = "ddc", "owc";
+ function = "rsvd2";
+ tristate;
+ };
+ dta {
+ pins = "dta", "dtb", "dtc", "dtd";
+ function = "vi";
+ pull-down;
+ };
+ dte {
+ pins = "dte";
+ function = "vi";
+ pull-down;
+ tristate;
+ };
+ dtf {
+ pins = "dtf";
+ function = "i2c3";
+ };
+ gmb {
+ pins = "gmb", "spia";
+ function = "gmi";
+ pull-up;
+ tristate;
+ };
+ gmc {
+ pins = "gmc";
+ function = "uartd";
+ };
+ gmd {
+ pins = "gmd";
+ function = "sflash";
+ };
+ gpu {
+ pins = "gpu";
+ function = "pwm";
+ };
+ gpu7 {
+ pins = "gpu7";
+ function = "rtck";
+ };
+ gpv {
+ pins = "gpv";
+ function = "pcie";
+ tristate;
+ };
+ hdint {
+ pins = "hdint", "lsc1", "lsck", "lsda";
+ function = "hdmi";
+ tristate;
+ };
+ i2cp {
+ pins = "i2cp", "rm";
+ function = "i2c";
+ };
+ irrx {
+ pins = "irrx", "irtx";
+ function = "uartb";
+ };
+ kbca {
+ pins = "kbca", "kbcb", "kbcc", "kbcd", "kbce", "kbcf";
+ function = "kbc";
+ pull-up;
+ };
+ lcsn {
+ pins = "lcsn", "ldc", "lpw1", "lsdi", "lvp0";
+ function = "rsvd4";
+ tristate;
+ };
+ ld0 {
+ pins = "ld0", "ld1", "ld10", "ld11", "ld12", "ld13", "ld14", "ld15", "ld16", "ld17", "ld2", "ld3", "ld4", "ld5", "ld6", "ld7", "ld8", "ld9", "ldi", "lhp0", "lhp1", "lhp2", "lhs", "lpp", "lsc0", "lspi", "lvp1", "lvs";
+ function = "displaya";
+ };
+ lm0 {
+ pins = "lm0";
+ function = "rsvd4";
+ };
+ lm1 {
+ pins = "lm1";
+ function = "crt";
+ tristate;
+ };
+ lpw0 {
+ pins = "lpw0", "lpw2", "pta";
+ function = "hdmi";
+ };
+ pmc {
+ pins = "pmc";
+ function = "pwr_on";
+ };
+ sdb {
+ pins = "sdb", "sdc", "sdd";
+ function = "sdio3";
+ };
+ sdio1 {
+ pins = "sdio1";
+ function = "sdio1";
+ pull-up;
+ };
+ slxa {
+ pins = "slxa";
+ function = "pcie";
+ pull-up;
+ tristate;
+ };
+ slxc {
+ pins = "slxc";
+ function = "spdif";
+ tristate;
+ };
+ slxd {
+ pins = "slxd";
+ function = "spdif";
+ };
+ slxk {
+ pins = "slxk";
+ function = "pcie";
+ };
+ spdi {
+ pins = "spdi", "spdo", "uac";
+ function = "rsvd2";
+ };
+ spic {
+ pins = "spic";
+ function = "gmi";
+ pull-up;
+ };
+ spid {
+ pins = "spid", "spie";
+ function = "spi1";
+ tristate;
+ };
+ spif {
+ pins = "spif";
+ function = "spi1";
+ pull-down;
+ tristate;
+ };
+ spig {
+ pins = "spig", "spih";
+ function = "spi2_alt";
+ pull-up;
+ tristate;
+ };
+ uaa {
+ pins = "uaa", "uab";
+ function = "ulpi";
+ pull-up;
+ };
+ uad {
+ pins = "uad";
+ function = "irda";
+ };
+ uca {
+ pins = "uca", "ucb";
+ function = "uartc";
+ };
+ uda {
+ pins = "uda";
+ function = "ulpi";
+ };
+ };
+ nvidia,drive-groups {
+ sdio1 {
+ pins = "sdio1";
+ nvidia,schmitt;
+ nvidia,drive-power = <3>;
+ nvidia,pull-down-strength = <31>;
+ nvidia,pull-up-strength = <31>;
+ nvidia,slew-rate-rising = <3>;
+ nvidia,slew-rate-falling = <3>;
+ };
+ };
+ };
+
serial at 70006300 {
clock-frequency = < 216000000 >;
};
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index 5727595..5921c1d 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -77,6 +77,11 @@
gpio-controller;
};
+ pinmux: pinmux at 70000000 {
+ compatible = "nvidia,tegra20-pinmux";
+ reg = < 0x70000000 0xc00 >;
+ };
+
serial at 70006000 {
compatible = "nvidia,tegra20-uart";
reg = <0x70006000 0x40>;
--
1.7.0.4
^ permalink raw reply related [flat|nested] 69+ messages in thread* [PATCH v3 05/13] arm/dt: Tegra: Add pinmux node
@ 2011-08-25 23:43 ` Stephen Warren
0 siblings, 0 replies; 69+ messages in thread
From: Stephen Warren @ 2011-08-25 23:43 UTC (permalink / raw)
To: Grant Likely, Colin Cross, Erik Gilling, Olof Johansson
Cc: Russell King, Arnd Bergmann, devicetree-discuss, linux-tegra,
linux-arm-kernel, linux-kernel, Belisko Marek, Jamie Iles,
Shawn Guo, Sergei Shtylyov, Linus Walleij, Stephen Warren
Add a pinmux node to tegra20.dtsi in order to instantiate the future
pinmux device. Add pinmux nodes to Harmony and Seaboard, which detail
the entire initial pinmux configuration. This configuration is identical
to that in board-harmony/seaboard-pinmux.c.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
---
arch/arm/boot/dts/tegra-harmony.dts | 243 ++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/tegra-seaboard.dts | 239 +++++++++++++++++++++++++++++++++
arch/arm/boot/dts/tegra20.dtsi | 5 +
3 files changed, 487 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/tegra-harmony.dts b/arch/arm/boot/dts/tegra-harmony.dts
index 2bbe559..a2b8dec 100644
--- a/arch/arm/boot/dts/tegra-harmony.dts
+++ b/arch/arm/boot/dts/tegra-harmony.dts
@@ -30,6 +30,249 @@
>;
};
+ pinmux: pinmux@70000000 {
+ nvidia,mux-groups {
+ ata {
+ pins = "ata";
+ function = "ide";
+ };
+ atb {
+ pins = "atb", "gma", "gme";
+ function = "sdio4";
+ };
+ atc {
+ pins = "atc";
+ function = "nand";
+ };
+ atd {
+ pins = "atd", "ate", "gmb", "gmd", "spia", "spib";
+ function = "gmi";
+ };
+ cdev1 {
+ pins = "cdev1";
+ function = "plla_out";
+ };
+ cdev2 {
+ pins = "cdev2";
+ function = "pllp_out4";
+ pull-down;
+ tristate;
+ };
+ ck32 {
+ pins = "ck32", "ddrc", "pmca", "pmcb", "pmcc", "pmcd", "pmce", "xm2c", "xm2d";
+ function = "none";
+ };
+ crtp {
+ pins = "crtp";
+ function = "crt";
+ tristate;
+ };
+ csus {
+ pins = "csus";
+ function = "vi_sensor_clk";
+ pull-down;
+ tristate;
+ };
+ dap1 {
+ pins = "dap1";
+ function = "dap1";
+ };
+ dap2 {
+ pins = "dap2";
+ function = "dap2";
+ tristate;
+ };
+ dap3 {
+ pins = "dap3";
+ function = "dap3";
+ tristate;
+ };
+ dap4 {
+ pins = "dap4";
+ function = "dap4";
+ tristate;
+ };
+ ddc {
+ pins = "ddc";
+ function = "i2c2";
+ pull-up;
+ };
+ dta {
+ pins = "dta", "dtd";
+ function = "sdio2";
+ pull-up;
+ };
+ dtb {
+ pins = "dtb";
+ function = "rsvd1";
+ };
+ dtc {
+ pins = "dtc", "dte";
+ function = "rsvd1";
+ tristate;
+ };
+ dtf {
+ pins = "dtf";
+ function = "i2c3";
+ tristate;
+ };
+ gmc {
+ pins = "gmc";
+ function = "uartd";
+ };
+ gpu {
+ pins = "gpu";
+ function = "gmi";
+ tristate;
+ };
+ gpu7 {
+ pins = "gpu7";
+ function = "rtck";
+ };
+ gpv {
+ pins = "gpv", "slxa", "slxk";
+ function = "pcie";
+ tristate;
+ };
+ hdint {
+ pins = "hdint";
+ function = "hdmi";
+ pull-up;
+ tristate;
+ };
+ i2cp {
+ pins = "i2cp", "rm";
+ function = "i2c";
+ };
+ irrx {
+ pins = "irrx", "irtx";
+ function = "uarta";
+ pull-up;
+ tristate;
+ };
+ kbca {
+ pins = "kbca", "kbcb", "kbcc", "kbcd", "kbce", "kbcf";
+ function = "kbc";
+ pull-up;
+ };
+ lcsn {
+ pins = "lcsn", "ldc", "lm1", "lpw1", "lsc1", "lsck", "lsda", "lsdi", "lvp0";
+ function = "displaya";
+ pull-up;
+ tristate;
+ };
+ ld0 {
+ pins = "ld0", "ld1", "ld10", "ld11", "ld12", "ld13", "ld14", "ld15", "ld16", "ld17", "ld2", "ld3", "ld4", "ld5", "ld6", "ld7", "ld8", "ld9", "ldi", "lhp0", "lhp1", "lhp2", "lpp", "lvp1";
+ function = "displaya";
+ pull-down;
+ };
+ lhs {
+ pins = "lhs", "lm0", "lpw0", "lpw2", "lsc0", "lspi", "lvs";
+ function = "displaya";
+ pull-up;
+ };
+ owc {
+ pins = "owc";
+ function = "rsvd2";
+ pull-up;
+ tristate;
+ };
+ pmc {
+ pins = "pmc";
+ function = "pwr_on";
+ };
+ pta {
+ pins = "pta";
+ function = "hdmi";
+ };
+ sdb {
+ pins = "sdb";
+ function = "pwm";
+ tristate;
+ };
+ sdc {
+ pins = "sdc";
+ function = "pwm";
+ pull-up;
+ };
+ sdd {
+ pins = "sdd";
+ function = "pwm";
+ pull-up;
+ tristate;
+ };
+ sdio1 {
+ pins = "sdio1";
+ function = "sdio1";
+ tristate;
+ };
+ slxc {
+ pins = "slxc", "slxd";
+ function = "spdif";
+ tristate;
+ };
+ spdi {
+ pins = "spdi", "spdo", "uac";
+ function = "rsvd2";
+ tristate;
+ };
+ spic {
+ pins = "spic";
+ function = "gmi";
+ pull-up;
+ tristate;
+ };
+ spid {
+ pins = "spid", "spif";
+ function = "spi1";
+ pull-down;
+ tristate;
+ };
+ spie {
+ pins = "spie";
+ function = "spi1";
+ pull-up;
+ tristate;
+ };
+ spig {
+ pins = "spig";
+ function = "spi2_alt";
+ tristate;
+ };
+ spih {
+ pins = "spih";
+ function = "spi2_alt";
+ pull-up;
+ tristate;
+ };
+ uaa {
+ pins = "uaa", "uab";
+ function = "ulpi";
+ pull-up;
+ tristate;
+ };
+ uad {
+ pins = "uad";
+ function = "irda";
+ pull-up;
+ tristate;
+ };
+ uca {
+ pins = "uca", "ucb";
+ function = "uartc";
+ pull-up;
+ tristate;
+ };
+ uda {
+ pins = "uda";
+ function = "ulpi";
+ tristate;
+ };
+ };
+ nvidia,drive-groups {
+ };
+ };
+
i2c@7000c000 {
clock-frequency = <400000>;
diff --git a/arch/arm/boot/dts/tegra-seaboard.dts b/arch/arm/boot/dts/tegra-seaboard.dts
index ec8f8cf..b0677b2 100644
--- a/arch/arm/boot/dts/tegra-seaboard.dts
+++ b/arch/arm/boot/dts/tegra-seaboard.dts
@@ -24,6 +24,245 @@
>;
};
+ pinmux: pinmux@70000000 {
+ nvidia,mux-groups {
+ ata {
+ pins = "ata";
+ function = "ide";
+ };
+ atb {
+ pins = "atb", "gma", "gme";
+ function = "sdio4";
+ };
+ atc {
+ pins = "atc";
+ function = "nand";
+ };
+ atd {
+ pins = "atd";
+ function = "gmi";
+ };
+ ate {
+ pins = "ate", "spib";
+ function = "gmi";
+ tristate;
+ };
+ cdev1 {
+ pins = "cdev1";
+ function = "plla_out";
+ };
+ cdev2 {
+ pins = "cdev2";
+ function = "pllp_out4";
+ };
+ ck32 {
+ pins = "ck32", "ddrc", "pmca", "pmcb", "pmcc", "pmcd", "pmce", "xm2c", "xm2d";
+ function = "none";
+ };
+ crtp {
+ pins = "crtp";
+ function = "crt";
+ pull-up;
+ tristate;
+ };
+ csus {
+ pins = "csus";
+ function = "vi_sensor_clk";
+ tristate;
+ };
+ dap1 {
+ pins = "dap1";
+ function = "dap1";
+ };
+ dap2 {
+ pins = "dap2";
+ function = "dap2";
+ };
+ dap3 {
+ pins = "dap3";
+ function = "dap3";
+ tristate;
+ };
+ dap4 {
+ pins = "dap4";
+ function = "dap4";
+ };
+ ddc {
+ pins = "ddc", "owc";
+ function = "rsvd2";
+ tristate;
+ };
+ dta {
+ pins = "dta", "dtb", "dtc", "dtd";
+ function = "vi";
+ pull-down;
+ };
+ dte {
+ pins = "dte";
+ function = "vi";
+ pull-down;
+ tristate;
+ };
+ dtf {
+ pins = "dtf";
+ function = "i2c3";
+ };
+ gmb {
+ pins = "gmb", "spia";
+ function = "gmi";
+ pull-up;
+ tristate;
+ };
+ gmc {
+ pins = "gmc";
+ function = "uartd";
+ };
+ gmd {
+ pins = "gmd";
+ function = "sflash";
+ };
+ gpu {
+ pins = "gpu";
+ function = "pwm";
+ };
+ gpu7 {
+ pins = "gpu7";
+ function = "rtck";
+ };
+ gpv {
+ pins = "gpv";
+ function = "pcie";
+ tristate;
+ };
+ hdint {
+ pins = "hdint", "lsc1", "lsck", "lsda";
+ function = "hdmi";
+ tristate;
+ };
+ i2cp {
+ pins = "i2cp", "rm";
+ function = "i2c";
+ };
+ irrx {
+ pins = "irrx", "irtx";
+ function = "uartb";
+ };
+ kbca {
+ pins = "kbca", "kbcb", "kbcc", "kbcd", "kbce", "kbcf";
+ function = "kbc";
+ pull-up;
+ };
+ lcsn {
+ pins = "lcsn", "ldc", "lpw1", "lsdi", "lvp0";
+ function = "rsvd4";
+ tristate;
+ };
+ ld0 {
+ pins = "ld0", "ld1", "ld10", "ld11", "ld12", "ld13", "ld14", "ld15", "ld16", "ld17", "ld2", "ld3", "ld4", "ld5", "ld6", "ld7", "ld8", "ld9", "ldi", "lhp0", "lhp1", "lhp2", "lhs", "lpp", "lsc0", "lspi", "lvp1", "lvs";
+ function = "displaya";
+ };
+ lm0 {
+ pins = "lm0";
+ function = "rsvd4";
+ };
+ lm1 {
+ pins = "lm1";
+ function = "crt";
+ tristate;
+ };
+ lpw0 {
+ pins = "lpw0", "lpw2", "pta";
+ function = "hdmi";
+ };
+ pmc {
+ pins = "pmc";
+ function = "pwr_on";
+ };
+ sdb {
+ pins = "sdb", "sdc", "sdd";
+ function = "sdio3";
+ };
+ sdio1 {
+ pins = "sdio1";
+ function = "sdio1";
+ pull-up;
+ };
+ slxa {
+ pins = "slxa";
+ function = "pcie";
+ pull-up;
+ tristate;
+ };
+ slxc {
+ pins = "slxc";
+ function = "spdif";
+ tristate;
+ };
+ slxd {
+ pins = "slxd";
+ function = "spdif";
+ };
+ slxk {
+ pins = "slxk";
+ function = "pcie";
+ };
+ spdi {
+ pins = "spdi", "spdo", "uac";
+ function = "rsvd2";
+ };
+ spic {
+ pins = "spic";
+ function = "gmi";
+ pull-up;
+ };
+ spid {
+ pins = "spid", "spie";
+ function = "spi1";
+ tristate;
+ };
+ spif {
+ pins = "spif";
+ function = "spi1";
+ pull-down;
+ tristate;
+ };
+ spig {
+ pins = "spig", "spih";
+ function = "spi2_alt";
+ pull-up;
+ tristate;
+ };
+ uaa {
+ pins = "uaa", "uab";
+ function = "ulpi";
+ pull-up;
+ };
+ uad {
+ pins = "uad";
+ function = "irda";
+ };
+ uca {
+ pins = "uca", "ucb";
+ function = "uartc";
+ };
+ uda {
+ pins = "uda";
+ function = "ulpi";
+ };
+ };
+ nvidia,drive-groups {
+ sdio1 {
+ pins = "sdio1";
+ nvidia,schmitt;
+ nvidia,drive-power = <3>;
+ nvidia,pull-down-strength = <31>;
+ nvidia,pull-up-strength = <31>;
+ nvidia,slew-rate-rising = <3>;
+ nvidia,slew-rate-falling = <3>;
+ };
+ };
+ };
+
serial@70006300 {
clock-frequency = < 216000000 >;
};
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index 5727595..5921c1d 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -77,6 +77,11 @@
gpio-controller;
};
+ pinmux: pinmux@70000000 {
+ compatible = "nvidia,tegra20-pinmux";
+ reg = < 0x70000000 0xc00 >;
+ };
+
serial@70006000 {
compatible = "nvidia,tegra20-uart";
reg = <0x70006000 0x40>;
--
1.7.0.4
^ permalink raw reply related [flat|nested] 69+ messages in thread
* [PATCH v3 07/13] gpio/tegra: Convert to a platform device
2011-08-25 23:43 ` Stephen Warren
(?)
@ 2011-08-25 23:43 ` Stephen Warren
-1 siblings, 0 replies; 69+ messages in thread
From: Stephen Warren @ 2011-08-25 23:43 UTC (permalink / raw)
To: Grant Likely, Colin Cross, Erik Gilling, Olof Johansson
Cc: Russell King, Sergei Shtylyov, Belisko Marek,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-tegra-u79uwXL29TY76Z2rM5mHXA, Linus Walleij,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Signed-off-by: Stephen Warren <swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
drivers/gpio/gpio-tegra.c | 25 ++++++++++++++-----------
1 files changed, 14 insertions(+), 11 deletions(-)
diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c
index df64536..4da4839 100644
--- a/drivers/gpio/gpio-tegra.c
+++ b/drivers/gpio/gpio-tegra.c
@@ -20,10 +20,10 @@
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
-
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/of.h>
+#include <linux/platform_device.h>
#include <asm/mach/irq.h>
@@ -332,7 +332,7 @@ static struct irq_chip tegra_gpio_irq_chip = {
*/
static struct lock_class_key gpio_lock_class;
-static int __init tegra_gpio_init(void)
+static int __init tegra_gpio_probe(struct platform_device *pdev)
{
struct tegra_gpio_bank *bank;
int gpio;
@@ -346,15 +346,6 @@ static int __init tegra_gpio_init(void)
}
}
-#ifdef CONFIG_OF_GPIO
- /*
- * This isn't ideal, but it gets things hooked up until this
- * driver is converted into a platform_device
- */
- tegra_gpio_chip.of_node = of_find_compatible_node(NULL, NULL,
- "nvidia,tegra20-gpio");
-#endif /* CONFIG_OF_GPIO */
-
gpiochip_add(&tegra_gpio_chip);
for (gpio = 0; gpio < TEGRA_NR_GPIOS; gpio++) {
@@ -383,6 +374,18 @@ static int __init tegra_gpio_init(void)
return 0;
}
+static struct platform_driver tegra_gpio_driver = {
+ .driver = {
+ .name = "tegra-gpio",
+ .owner = THIS_MODULE,
+ },
+ .probe = tegra_gpio_probe,
+};
+
+static int __init tegra_gpio_init(void)
+{
+ return platform_driver_register(&tegra_gpio_driver);
+}
postcore_initcall(tegra_gpio_init);
void __init tegra_gpio_config(struct tegra_gpio_table *table, int num)
--
1.7.0.4
^ permalink raw reply related [flat|nested] 69+ messages in thread* [PATCH v3 07/13] gpio/tegra: Convert to a platform device
@ 2011-08-25 23:43 ` Stephen Warren
0 siblings, 0 replies; 69+ messages in thread
From: Stephen Warren @ 2011-08-25 23:43 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Stephen Warren <swarren@nvidia.com>
---
drivers/gpio/gpio-tegra.c | 25 ++++++++++++++-----------
1 files changed, 14 insertions(+), 11 deletions(-)
diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c
index df64536..4da4839 100644
--- a/drivers/gpio/gpio-tegra.c
+++ b/drivers/gpio/gpio-tegra.c
@@ -20,10 +20,10 @@
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
-
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/of.h>
+#include <linux/platform_device.h>
#include <asm/mach/irq.h>
@@ -332,7 +332,7 @@ static struct irq_chip tegra_gpio_irq_chip = {
*/
static struct lock_class_key gpio_lock_class;
-static int __init tegra_gpio_init(void)
+static int __init tegra_gpio_probe(struct platform_device *pdev)
{
struct tegra_gpio_bank *bank;
int gpio;
@@ -346,15 +346,6 @@ static int __init tegra_gpio_init(void)
}
}
-#ifdef CONFIG_OF_GPIO
- /*
- * This isn't ideal, but it gets things hooked up until this
- * driver is converted into a platform_device
- */
- tegra_gpio_chip.of_node = of_find_compatible_node(NULL, NULL,
- "nvidia,tegra20-gpio");
-#endif /* CONFIG_OF_GPIO */
-
gpiochip_add(&tegra_gpio_chip);
for (gpio = 0; gpio < TEGRA_NR_GPIOS; gpio++) {
@@ -383,6 +374,18 @@ static int __init tegra_gpio_init(void)
return 0;
}
+static struct platform_driver tegra_gpio_driver = {
+ .driver = {
+ .name = "tegra-gpio",
+ .owner = THIS_MODULE,
+ },
+ .probe = tegra_gpio_probe,
+};
+
+static int __init tegra_gpio_init(void)
+{
+ return platform_driver_register(&tegra_gpio_driver);
+}
postcore_initcall(tegra_gpio_init);
void __init tegra_gpio_config(struct tegra_gpio_table *table, int num)
--
1.7.0.4
^ permalink raw reply related [flat|nested] 69+ messages in thread* [PATCH v3 07/13] gpio/tegra: Convert to a platform device
@ 2011-08-25 23:43 ` Stephen Warren
0 siblings, 0 replies; 69+ messages in thread
From: Stephen Warren @ 2011-08-25 23:43 UTC (permalink / raw)
To: Grant Likely, Colin Cross, Erik Gilling, Olof Johansson
Cc: Russell King, Arnd Bergmann, devicetree-discuss, linux-tegra,
linux-arm-kernel, linux-kernel, Belisko Marek, Jamie Iles,
Shawn Guo, Sergei Shtylyov, Linus Walleij, Stephen Warren
Signed-off-by: Stephen Warren <swarren@nvidia.com>
---
drivers/gpio/gpio-tegra.c | 25 ++++++++++++++-----------
1 files changed, 14 insertions(+), 11 deletions(-)
diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c
index df64536..4da4839 100644
--- a/drivers/gpio/gpio-tegra.c
+++ b/drivers/gpio/gpio-tegra.c
@@ -20,10 +20,10 @@
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
-
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/of.h>
+#include <linux/platform_device.h>
#include <asm/mach/irq.h>
@@ -332,7 +332,7 @@ static struct irq_chip tegra_gpio_irq_chip = {
*/
static struct lock_class_key gpio_lock_class;
-static int __init tegra_gpio_init(void)
+static int __init tegra_gpio_probe(struct platform_device *pdev)
{
struct tegra_gpio_bank *bank;
int gpio;
@@ -346,15 +346,6 @@ static int __init tegra_gpio_init(void)
}
}
-#ifdef CONFIG_OF_GPIO
- /*
- * This isn't ideal, but it gets things hooked up until this
- * driver is converted into a platform_device
- */
- tegra_gpio_chip.of_node = of_find_compatible_node(NULL, NULL,
- "nvidia,tegra20-gpio");
-#endif /* CONFIG_OF_GPIO */
-
gpiochip_add(&tegra_gpio_chip);
for (gpio = 0; gpio < TEGRA_NR_GPIOS; gpio++) {
@@ -383,6 +374,18 @@ static int __init tegra_gpio_init(void)
return 0;
}
+static struct platform_driver tegra_gpio_driver = {
+ .driver = {
+ .name = "tegra-gpio",
+ .owner = THIS_MODULE,
+ },
+ .probe = tegra_gpio_probe,
+};
+
+static int __init tegra_gpio_init(void)
+{
+ return platform_driver_register(&tegra_gpio_driver);
+}
postcore_initcall(tegra_gpio_init);
void __init tegra_gpio_config(struct tegra_gpio_table *table, int num)
--
1.7.0.4
^ permalink raw reply related [flat|nested] 69+ messages in thread
* [PATCH v3 09/13] arm/tegra: Convert pinmux driver to a platform device
2011-08-25 23:43 ` Stephen Warren
(?)
@ 2011-08-25 23:43 ` Stephen Warren
-1 siblings, 0 replies; 69+ messages in thread
From: Stephen Warren @ 2011-08-25 23:43 UTC (permalink / raw)
To: Grant Likely, Colin Cross, Erik Gilling, Olof Johansson
Cc: Russell King, Sergei Shtylyov, Belisko Marek,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-tegra-u79uwXL29TY76Z2rM5mHXA, Linus Walleij,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Signed-off-by: Stephen Warren <swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
arch/arm/mach-tegra/pinmux.c | 20 ++++++++++++++++++++
1 files changed, 20 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-tegra/pinmux.c b/arch/arm/mach-tegra/pinmux.c
index f80d507..ed316f9 100644
--- a/arch/arm/mach-tegra/pinmux.c
+++ b/arch/arm/mach-tegra/pinmux.c
@@ -20,6 +20,7 @@
#include <linux/errno.h>
#include <linux/spinlock.h>
#include <linux/io.h>
+#include <linux/platform_device.h>
#include <mach/iomap.h>
#include <mach/pinmux.h>
@@ -665,6 +666,25 @@ void tegra_pinmux_config_pullupdown_table(const struct tegra_pingroup_config *co
}
}
+static int __init tegra_pinmux_probe(struct platform_device *pdev)
+{
+ return 0;
+}
+
+static struct platform_driver tegra_pinmux_driver = {
+ .driver = {
+ .name = "tegra-pinmux",
+ .owner = THIS_MODULE,
+ },
+ .probe = tegra_pinmux_probe,
+};
+
+static int __init tegra_pinmux_init(void)
+{
+ return platform_driver_register(&tegra_pinmux_driver);
+}
+postcore_initcall(tegra_pinmux_init);
+
#ifdef CONFIG_DEBUG_FS
#include <linux/debugfs.h>
--
1.7.0.4
^ permalink raw reply related [flat|nested] 69+ messages in thread* [PATCH v3 09/13] arm/tegra: Convert pinmux driver to a platform device
@ 2011-08-25 23:43 ` Stephen Warren
0 siblings, 0 replies; 69+ messages in thread
From: Stephen Warren @ 2011-08-25 23:43 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Stephen Warren <swarren@nvidia.com>
---
arch/arm/mach-tegra/pinmux.c | 20 ++++++++++++++++++++
1 files changed, 20 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-tegra/pinmux.c b/arch/arm/mach-tegra/pinmux.c
index f80d507..ed316f9 100644
--- a/arch/arm/mach-tegra/pinmux.c
+++ b/arch/arm/mach-tegra/pinmux.c
@@ -20,6 +20,7 @@
#include <linux/errno.h>
#include <linux/spinlock.h>
#include <linux/io.h>
+#include <linux/platform_device.h>
#include <mach/iomap.h>
#include <mach/pinmux.h>
@@ -665,6 +666,25 @@ void tegra_pinmux_config_pullupdown_table(const struct tegra_pingroup_config *co
}
}
+static int __init tegra_pinmux_probe(struct platform_device *pdev)
+{
+ return 0;
+}
+
+static struct platform_driver tegra_pinmux_driver = {
+ .driver = {
+ .name = "tegra-pinmux",
+ .owner = THIS_MODULE,
+ },
+ .probe = tegra_pinmux_probe,
+};
+
+static int __init tegra_pinmux_init(void)
+{
+ return platform_driver_register(&tegra_pinmux_driver);
+}
+postcore_initcall(tegra_pinmux_init);
+
#ifdef CONFIG_DEBUG_FS
#include <linux/debugfs.h>
--
1.7.0.4
^ permalink raw reply related [flat|nested] 69+ messages in thread* [PATCH v3 09/13] arm/tegra: Convert pinmux driver to a platform device
@ 2011-08-25 23:43 ` Stephen Warren
0 siblings, 0 replies; 69+ messages in thread
From: Stephen Warren @ 2011-08-25 23:43 UTC (permalink / raw)
To: Grant Likely, Colin Cross, Erik Gilling, Olof Johansson
Cc: Russell King, Arnd Bergmann, devicetree-discuss, linux-tegra,
linux-arm-kernel, linux-kernel, Belisko Marek, Jamie Iles,
Shawn Guo, Sergei Shtylyov, Linus Walleij, Stephen Warren
Signed-off-by: Stephen Warren <swarren@nvidia.com>
---
arch/arm/mach-tegra/pinmux.c | 20 ++++++++++++++++++++
1 files changed, 20 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-tegra/pinmux.c b/arch/arm/mach-tegra/pinmux.c
index f80d507..ed316f9 100644
--- a/arch/arm/mach-tegra/pinmux.c
+++ b/arch/arm/mach-tegra/pinmux.c
@@ -20,6 +20,7 @@
#include <linux/errno.h>
#include <linux/spinlock.h>
#include <linux/io.h>
+#include <linux/platform_device.h>
#include <mach/iomap.h>
#include <mach/pinmux.h>
@@ -665,6 +666,25 @@ void tegra_pinmux_config_pullupdown_table(const struct tegra_pingroup_config *co
}
}
+static int __init tegra_pinmux_probe(struct platform_device *pdev)
+{
+ return 0;
+}
+
+static struct platform_driver tegra_pinmux_driver = {
+ .driver = {
+ .name = "tegra-pinmux",
+ .owner = THIS_MODULE,
+ },
+ .probe = tegra_pinmux_probe,
+};
+
+static int __init tegra_pinmux_init(void)
+{
+ return platform_driver_register(&tegra_pinmux_driver);
+}
+postcore_initcall(tegra_pinmux_init);
+
#ifdef CONFIG_DEBUG_FS
#include <linux/debugfs.h>
--
1.7.0.4
^ permalink raw reply related [flat|nested] 69+ messages in thread
* [PATCH v3 10/13] of: add a generic pinmux helper
2011-08-25 23:43 ` Stephen Warren
(?)
@ 2011-08-25 23:43 ` Stephen Warren
-1 siblings, 0 replies; 69+ messages in thread
From: Stephen Warren @ 2011-08-25 23:43 UTC (permalink / raw)
To: Grant Likely, Colin Cross, Erik Gilling, Olof Johansson
Cc: Russell King, Sergei Shtylyov, Belisko Marek,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-tegra-u79uwXL29TY76Z2rM5mHXA, Linus Walleij,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
From: Jamie Iles <jamie-wmLquQDDieKakBO8gow8eQ@public.gmane.org>
This patch adds a helper function of_pinmux_parse() that can be used to
extract common pinmux configuration to avoid each platform implementing
a parsing loop. Platforms supply the node containing the pinmux
definitions and a platform specific callback for configuring a pingroup.
Signed-off-by: Jamie Iles <jamie-wmLquQDDieKakBO8gow8eQ@public.gmane.org>
[swarren: Added support for pins property, added parse() callback, use
dev_err instead of pr_err, related minor changes]
Signed-off-by: Stephen Warren <swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
drivers/of/Kconfig | 5 ++
drivers/of/Makefile | 1 +
drivers/of/of_pinmux.c | 109 +++++++++++++++++++++++++++++++++++++++++++++
include/linux/of_pinmux.h | 74 ++++++++++++++++++++++++++++++
4 files changed, 189 insertions(+), 0 deletions(-)
create mode 100644 drivers/of/of_pinmux.c
create mode 100644 include/linux/of_pinmux.h
diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig
index cac63c9..71a19a3 100644
--- a/drivers/of/Kconfig
+++ b/drivers/of/Kconfig
@@ -81,4 +81,9 @@ config OF_PCI_IRQ
help
OpenFirmware PCI IRQ routing helpers
+config OF_PINMUX
+ def_bool y
+ help
+ OpenFirmware pin multiplexing helpers
+
endmenu # OF
diff --git a/drivers/of/Makefile b/drivers/of/Makefile
index dccb117..0666ff3 100644
--- a/drivers/of/Makefile
+++ b/drivers/of/Makefile
@@ -11,3 +11,4 @@ obj-$(CONFIG_OF_SPI) += of_spi.o
obj-$(CONFIG_OF_MDIO) += of_mdio.o
obj-$(CONFIG_OF_PCI) += of_pci.o
obj-$(CONFIG_OF_PCI_IRQ) += of_pci_irq.o
+obj-$(CONFIG_OF_PINMUX) += of_pinmux.o
diff --git a/drivers/of/of_pinmux.c b/drivers/of/of_pinmux.c
new file mode 100644
index 0000000..8050b8b
--- /dev/null
+++ b/drivers/of/of_pinmux.c
@@ -0,0 +1,109 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ * Copyright (c) 2011 NVIDIA, Inc.
+ *
+ * Generic pinmux bindings for device tree.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_iter_prop.h>
+#include <linux/of_pinmux.h>
+
+/**
+ * of_pinmux_parse - configure a set of pinmux groups for a pinmux controller
+ *
+ * @controller: the controller to configure the pinmux entries for. This
+ * defines the controller device node and the callback for configuring
+ * the pingroups.
+ *
+ * This helper loops over all of the child nodes of a pinmux controller and
+ * collects the configuration for each pinmux group. A pinmux group is
+ * defined as one or more pins that are configured to a common function. This
+ * handles common properties that many platforms may implement, but for
+ * platform specific properties these may be handled in the configure
+ * callback.
+ */
+int of_pinmux_parse(const struct of_pinmux_ctrl *ctrl,
+ struct of_pinmux_cfg *cfg)
+{
+ struct device_node *np;
+
+ if (!ctrl || !ctrl->dev || !ctrl->node || !ctrl->configure)
+ return -EINVAL;
+
+ for_each_child_of_node(ctrl->node, np) {
+ int ret;
+ bool hadpins = 0;
+ struct of_iter_string_prop iter;
+
+ cfg->node = np;
+
+ ret = of_property_read_string(np, "function",
+ &cfg->function);
+ if (ret < 0) {
+ dev_err(ctrl->dev, "no function for node %s\n",
+ np->name);
+ continue;
+ }
+
+ cfg->flags &= 0;
+
+ if (of_find_property(np, "pull-up", NULL))
+ cfg->flags |= OF_PINMUX_PULL_UP;
+ if (of_find_property(np, "pull-down", NULL))
+ cfg->flags |= OF_PINMUX_PULL_DOWN;
+
+ if ((cfg->flags & OF_PINMUX_PULL_MASK) ==
+ OF_PINMUX_PULL_MASK) {
+ dev_warn(ctrl->dev, "node %s has both "
+ "pull-up and pull-down properties - "
+ "defaulting to no pull\n",
+ np->name);
+ cfg->flags &= ~OF_PINMUX_PULL_MASK;
+ }
+
+ if (of_find_property(np, "tristate", NULL))
+ cfg->flags |= OF_PINMUX_TRISTATE;
+
+ if (ctrl->parse && ctrl->parse(ctrl, cfg)) {
+ dev_warn(ctrl->dev,
+ "failed to parse node %s\n",
+ np->name);
+ continue;
+ }
+
+ for_each_string_property_value(iter, np, "pins") {
+ hadpins = 1;
+
+ cfg->pin = iter.value;
+
+ dev_dbg(ctrl->dev,
+ "configure pin %s func=%s flags=0x%lx\n",
+ cfg->pin, cfg->function, cfg->flags);
+ if (ctrl->configure(ctrl, cfg))
+ dev_warn(ctrl->dev,
+ "failed to configure pin %s\n",
+ cfg->pin);
+ }
+
+ if (!hadpins)
+ dev_warn(ctrl->dev, "no pins for node %s\n",
+ np->name);
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(of_pinmux_parse);
diff --git a/include/linux/of_pinmux.h b/include/linux/of_pinmux.h
new file mode 100644
index 0000000..7ccddcf
--- /dev/null
+++ b/include/linux/of_pinmux.h
@@ -0,0 +1,74 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ * Copyright (c) 2011 NVIDIA, Inc.
+ *
+ * Generic pinmux bindings for device tree.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __OF_PINMUX_H__
+#define __OF_PINMUX_H__
+
+struct device_node;
+
+#define OF_PINMUX_PULL_UP (1 << 0)
+#define OF_PINMUX_PULL_DOWN (1 << 1)
+#define OF_PINMUX_TRISTATE (1 << 2)
+
+#define OF_PINMUX_PULL_MASK (OF_PINMUX_PULL_UP | OF_PINMUX_PULL_DOWN)
+
+/**
+ * struct of_pinmux_cfg - configuration state for a single pinmux entry.
+ *
+ * @function: the name of the function that the pinmux entry should be
+ * configured to.
+ * @pin: the device_node of the pinmux entry that should be configured.
+ * Platform specific properties that aren't in the generic binding may be
+ * obtained from this device node.
+ * @flags: flags for common pinmux options such as pull and tristate.
+ */
+struct of_pinmux_cfg {
+ struct device_node *node;
+ const char *pin;
+ const char *function;
+ unsigned long flags;
+};
+
+/**
+ * struct of_pinmux_ctrl - platform specific pinmux control state.
+ *
+ * @pinmux: the pinmux device node. All child nodes are required to be the
+ * pinmux entry definitions. Depending on the platform, this may either be
+ * a single pin or a group of pins where they can be set to a common
+ * function.
+ * @configure: platform specific callback to configure the pinmux entry.
+ */
+struct of_pinmux_ctrl {
+ struct device *dev;
+ struct device_node *node;
+ int (*parse)(const struct of_pinmux_ctrl *ctrl,
+ struct of_pinmux_cfg *cfg);
+ int (*configure)(const struct of_pinmux_ctrl *ctrl,
+ const struct of_pinmux_cfg *cfg);
+};
+
+#ifdef CONFIG_OF
+extern int of_pinmux_parse(const struct of_pinmux_ctrl *ctrl,
+ struct of_pinmux_cfg *cfg);
+#else
+static inline int of_pinmux_parse(const struct of_pinmux_ctrl *ctrl,
+ struct of_pinmux_cfg *cfg)
+{
+ return -ENOSYS;
+}
+#endif /* CONFIG_OF */
+
+#endif /* __OF_PINMUX_H__ */
--
1.7.0.4
^ permalink raw reply related [flat|nested] 69+ messages in thread* [PATCH v3 10/13] of: add a generic pinmux helper
@ 2011-08-25 23:43 ` Stephen Warren
0 siblings, 0 replies; 69+ messages in thread
From: Stephen Warren @ 2011-08-25 23:43 UTC (permalink / raw)
To: linux-arm-kernel
From: Jamie Iles <jamie@jamieiles.com>
This patch adds a helper function of_pinmux_parse() that can be used to
extract common pinmux configuration to avoid each platform implementing
a parsing loop. Platforms supply the node containing the pinmux
definitions and a platform specific callback for configuring a pingroup.
Signed-off-by: Jamie Iles <jamie@jamieiles.com>
[swarren: Added support for pins property, added parse() callback, use
dev_err instead of pr_err, related minor changes]
Signed-off-by: Stephen Warren <swarren@nvidia.com>
---
drivers/of/Kconfig | 5 ++
drivers/of/Makefile | 1 +
drivers/of/of_pinmux.c | 109 +++++++++++++++++++++++++++++++++++++++++++++
include/linux/of_pinmux.h | 74 ++++++++++++++++++++++++++++++
4 files changed, 189 insertions(+), 0 deletions(-)
create mode 100644 drivers/of/of_pinmux.c
create mode 100644 include/linux/of_pinmux.h
diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig
index cac63c9..71a19a3 100644
--- a/drivers/of/Kconfig
+++ b/drivers/of/Kconfig
@@ -81,4 +81,9 @@ config OF_PCI_IRQ
help
OpenFirmware PCI IRQ routing helpers
+config OF_PINMUX
+ def_bool y
+ help
+ OpenFirmware pin multiplexing helpers
+
endmenu # OF
diff --git a/drivers/of/Makefile b/drivers/of/Makefile
index dccb117..0666ff3 100644
--- a/drivers/of/Makefile
+++ b/drivers/of/Makefile
@@ -11,3 +11,4 @@ obj-$(CONFIG_OF_SPI) += of_spi.o
obj-$(CONFIG_OF_MDIO) += of_mdio.o
obj-$(CONFIG_OF_PCI) += of_pci.o
obj-$(CONFIG_OF_PCI_IRQ) += of_pci_irq.o
+obj-$(CONFIG_OF_PINMUX) += of_pinmux.o
diff --git a/drivers/of/of_pinmux.c b/drivers/of/of_pinmux.c
new file mode 100644
index 0000000..8050b8b
--- /dev/null
+++ b/drivers/of/of_pinmux.c
@@ -0,0 +1,109 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ * Copyright (c) 2011 NVIDIA, Inc.
+ *
+ * Generic pinmux bindings for device tree.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_iter_prop.h>
+#include <linux/of_pinmux.h>
+
+/**
+ * of_pinmux_parse - configure a set of pinmux groups for a pinmux controller
+ *
+ * @controller: the controller to configure the pinmux entries for. This
+ * defines the controller device node and the callback for configuring
+ * the pingroups.
+ *
+ * This helper loops over all of the child nodes of a pinmux controller and
+ * collects the configuration for each pinmux group. A pinmux group is
+ * defined as one or more pins that are configured to a common function. This
+ * handles common properties that many platforms may implement, but for
+ * platform specific properties these may be handled in the configure
+ * callback.
+ */
+int of_pinmux_parse(const struct of_pinmux_ctrl *ctrl,
+ struct of_pinmux_cfg *cfg)
+{
+ struct device_node *np;
+
+ if (!ctrl || !ctrl->dev || !ctrl->node || !ctrl->configure)
+ return -EINVAL;
+
+ for_each_child_of_node(ctrl->node, np) {
+ int ret;
+ bool hadpins = 0;
+ struct of_iter_string_prop iter;
+
+ cfg->node = np;
+
+ ret = of_property_read_string(np, "function",
+ &cfg->function);
+ if (ret < 0) {
+ dev_err(ctrl->dev, "no function for node %s\n",
+ np->name);
+ continue;
+ }
+
+ cfg->flags &= 0;
+
+ if (of_find_property(np, "pull-up", NULL))
+ cfg->flags |= OF_PINMUX_PULL_UP;
+ if (of_find_property(np, "pull-down", NULL))
+ cfg->flags |= OF_PINMUX_PULL_DOWN;
+
+ if ((cfg->flags & OF_PINMUX_PULL_MASK) ==
+ OF_PINMUX_PULL_MASK) {
+ dev_warn(ctrl->dev, "node %s has both "
+ "pull-up and pull-down properties - "
+ "defaulting to no pull\n",
+ np->name);
+ cfg->flags &= ~OF_PINMUX_PULL_MASK;
+ }
+
+ if (of_find_property(np, "tristate", NULL))
+ cfg->flags |= OF_PINMUX_TRISTATE;
+
+ if (ctrl->parse && ctrl->parse(ctrl, cfg)) {
+ dev_warn(ctrl->dev,
+ "failed to parse node %s\n",
+ np->name);
+ continue;
+ }
+
+ for_each_string_property_value(iter, np, "pins") {
+ hadpins = 1;
+
+ cfg->pin = iter.value;
+
+ dev_dbg(ctrl->dev,
+ "configure pin %s func=%s flags=0x%lx\n",
+ cfg->pin, cfg->function, cfg->flags);
+ if (ctrl->configure(ctrl, cfg))
+ dev_warn(ctrl->dev,
+ "failed to configure pin %s\n",
+ cfg->pin);
+ }
+
+ if (!hadpins)
+ dev_warn(ctrl->dev, "no pins for node %s\n",
+ np->name);
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(of_pinmux_parse);
diff --git a/include/linux/of_pinmux.h b/include/linux/of_pinmux.h
new file mode 100644
index 0000000..7ccddcf
--- /dev/null
+++ b/include/linux/of_pinmux.h
@@ -0,0 +1,74 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ * Copyright (c) 2011 NVIDIA, Inc.
+ *
+ * Generic pinmux bindings for device tree.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __OF_PINMUX_H__
+#define __OF_PINMUX_H__
+
+struct device_node;
+
+#define OF_PINMUX_PULL_UP (1 << 0)
+#define OF_PINMUX_PULL_DOWN (1 << 1)
+#define OF_PINMUX_TRISTATE (1 << 2)
+
+#define OF_PINMUX_PULL_MASK (OF_PINMUX_PULL_UP | OF_PINMUX_PULL_DOWN)
+
+/**
+ * struct of_pinmux_cfg - configuration state for a single pinmux entry.
+ *
+ * @function: the name of the function that the pinmux entry should be
+ * configured to.
+ * @pin: the device_node of the pinmux entry that should be configured.
+ * Platform specific properties that aren't in the generic binding may be
+ * obtained from this device node.
+ * @flags: flags for common pinmux options such as pull and tristate.
+ */
+struct of_pinmux_cfg {
+ struct device_node *node;
+ const char *pin;
+ const char *function;
+ unsigned long flags;
+};
+
+/**
+ * struct of_pinmux_ctrl - platform specific pinmux control state.
+ *
+ * @pinmux: the pinmux device node. All child nodes are required to be the
+ * pinmux entry definitions. Depending on the platform, this may either be
+ * a single pin or a group of pins where they can be set to a common
+ * function.
+ * @configure: platform specific callback to configure the pinmux entry.
+ */
+struct of_pinmux_ctrl {
+ struct device *dev;
+ struct device_node *node;
+ int (*parse)(const struct of_pinmux_ctrl *ctrl,
+ struct of_pinmux_cfg *cfg);
+ int (*configure)(const struct of_pinmux_ctrl *ctrl,
+ const struct of_pinmux_cfg *cfg);
+};
+
+#ifdef CONFIG_OF
+extern int of_pinmux_parse(const struct of_pinmux_ctrl *ctrl,
+ struct of_pinmux_cfg *cfg);
+#else
+static inline int of_pinmux_parse(const struct of_pinmux_ctrl *ctrl,
+ struct of_pinmux_cfg *cfg)
+{
+ return -ENOSYS;
+}
+#endif /* CONFIG_OF */
+
+#endif /* __OF_PINMUX_H__ */
--
1.7.0.4
^ permalink raw reply related [flat|nested] 69+ messages in thread* [PATCH v3 10/13] of: add a generic pinmux helper
@ 2011-08-25 23:43 ` Stephen Warren
0 siblings, 0 replies; 69+ messages in thread
From: Stephen Warren @ 2011-08-25 23:43 UTC (permalink / raw)
To: Grant Likely, Colin Cross, Erik Gilling, Olof Johansson
Cc: Russell King, Arnd Bergmann, devicetree-discuss, linux-tegra,
linux-arm-kernel, linux-kernel, Belisko Marek, Jamie Iles,
Shawn Guo, Sergei Shtylyov, Linus Walleij, Stephen Warren
From: Jamie Iles <jamie@jamieiles.com>
This patch adds a helper function of_pinmux_parse() that can be used to
extract common pinmux configuration to avoid each platform implementing
a parsing loop. Platforms supply the node containing the pinmux
definitions and a platform specific callback for configuring a pingroup.
Signed-off-by: Jamie Iles <jamie@jamieiles.com>
[swarren: Added support for pins property, added parse() callback, use
dev_err instead of pr_err, related minor changes]
Signed-off-by: Stephen Warren <swarren@nvidia.com>
---
drivers/of/Kconfig | 5 ++
drivers/of/Makefile | 1 +
drivers/of/of_pinmux.c | 109 +++++++++++++++++++++++++++++++++++++++++++++
include/linux/of_pinmux.h | 74 ++++++++++++++++++++++++++++++
4 files changed, 189 insertions(+), 0 deletions(-)
create mode 100644 drivers/of/of_pinmux.c
create mode 100644 include/linux/of_pinmux.h
diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig
index cac63c9..71a19a3 100644
--- a/drivers/of/Kconfig
+++ b/drivers/of/Kconfig
@@ -81,4 +81,9 @@ config OF_PCI_IRQ
help
OpenFirmware PCI IRQ routing helpers
+config OF_PINMUX
+ def_bool y
+ help
+ OpenFirmware pin multiplexing helpers
+
endmenu # OF
diff --git a/drivers/of/Makefile b/drivers/of/Makefile
index dccb117..0666ff3 100644
--- a/drivers/of/Makefile
+++ b/drivers/of/Makefile
@@ -11,3 +11,4 @@ obj-$(CONFIG_OF_SPI) += of_spi.o
obj-$(CONFIG_OF_MDIO) += of_mdio.o
obj-$(CONFIG_OF_PCI) += of_pci.o
obj-$(CONFIG_OF_PCI_IRQ) += of_pci_irq.o
+obj-$(CONFIG_OF_PINMUX) += of_pinmux.o
diff --git a/drivers/of/of_pinmux.c b/drivers/of/of_pinmux.c
new file mode 100644
index 0000000..8050b8b
--- /dev/null
+++ b/drivers/of/of_pinmux.c
@@ -0,0 +1,109 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ * Copyright (c) 2011 NVIDIA, Inc.
+ *
+ * Generic pinmux bindings for device tree.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_iter_prop.h>
+#include <linux/of_pinmux.h>
+
+/**
+ * of_pinmux_parse - configure a set of pinmux groups for a pinmux controller
+ *
+ * @controller: the controller to configure the pinmux entries for. This
+ * defines the controller device node and the callback for configuring
+ * the pingroups.
+ *
+ * This helper loops over all of the child nodes of a pinmux controller and
+ * collects the configuration for each pinmux group. A pinmux group is
+ * defined as one or more pins that are configured to a common function. This
+ * handles common properties that many platforms may implement, but for
+ * platform specific properties these may be handled in the configure
+ * callback.
+ */
+int of_pinmux_parse(const struct of_pinmux_ctrl *ctrl,
+ struct of_pinmux_cfg *cfg)
+{
+ struct device_node *np;
+
+ if (!ctrl || !ctrl->dev || !ctrl->node || !ctrl->configure)
+ return -EINVAL;
+
+ for_each_child_of_node(ctrl->node, np) {
+ int ret;
+ bool hadpins = 0;
+ struct of_iter_string_prop iter;
+
+ cfg->node = np;
+
+ ret = of_property_read_string(np, "function",
+ &cfg->function);
+ if (ret < 0) {
+ dev_err(ctrl->dev, "no function for node %s\n",
+ np->name);
+ continue;
+ }
+
+ cfg->flags &= 0;
+
+ if (of_find_property(np, "pull-up", NULL))
+ cfg->flags |= OF_PINMUX_PULL_UP;
+ if (of_find_property(np, "pull-down", NULL))
+ cfg->flags |= OF_PINMUX_PULL_DOWN;
+
+ if ((cfg->flags & OF_PINMUX_PULL_MASK) ==
+ OF_PINMUX_PULL_MASK) {
+ dev_warn(ctrl->dev, "node %s has both "
+ "pull-up and pull-down properties - "
+ "defaulting to no pull\n",
+ np->name);
+ cfg->flags &= ~OF_PINMUX_PULL_MASK;
+ }
+
+ if (of_find_property(np, "tristate", NULL))
+ cfg->flags |= OF_PINMUX_TRISTATE;
+
+ if (ctrl->parse && ctrl->parse(ctrl, cfg)) {
+ dev_warn(ctrl->dev,
+ "failed to parse node %s\n",
+ np->name);
+ continue;
+ }
+
+ for_each_string_property_value(iter, np, "pins") {
+ hadpins = 1;
+
+ cfg->pin = iter.value;
+
+ dev_dbg(ctrl->dev,
+ "configure pin %s func=%s flags=0x%lx\n",
+ cfg->pin, cfg->function, cfg->flags);
+ if (ctrl->configure(ctrl, cfg))
+ dev_warn(ctrl->dev,
+ "failed to configure pin %s\n",
+ cfg->pin);
+ }
+
+ if (!hadpins)
+ dev_warn(ctrl->dev, "no pins for node %s\n",
+ np->name);
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(of_pinmux_parse);
diff --git a/include/linux/of_pinmux.h b/include/linux/of_pinmux.h
new file mode 100644
index 0000000..7ccddcf
--- /dev/null
+++ b/include/linux/of_pinmux.h
@@ -0,0 +1,74 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ * Copyright (c) 2011 NVIDIA, Inc.
+ *
+ * Generic pinmux bindings for device tree.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __OF_PINMUX_H__
+#define __OF_PINMUX_H__
+
+struct device_node;
+
+#define OF_PINMUX_PULL_UP (1 << 0)
+#define OF_PINMUX_PULL_DOWN (1 << 1)
+#define OF_PINMUX_TRISTATE (1 << 2)
+
+#define OF_PINMUX_PULL_MASK (OF_PINMUX_PULL_UP | OF_PINMUX_PULL_DOWN)
+
+/**
+ * struct of_pinmux_cfg - configuration state for a single pinmux entry.
+ *
+ * @function: the name of the function that the pinmux entry should be
+ * configured to.
+ * @pin: the device_node of the pinmux entry that should be configured.
+ * Platform specific properties that aren't in the generic binding may be
+ * obtained from this device node.
+ * @flags: flags for common pinmux options such as pull and tristate.
+ */
+struct of_pinmux_cfg {
+ struct device_node *node;
+ const char *pin;
+ const char *function;
+ unsigned long flags;
+};
+
+/**
+ * struct of_pinmux_ctrl - platform specific pinmux control state.
+ *
+ * @pinmux: the pinmux device node. All child nodes are required to be the
+ * pinmux entry definitions. Depending on the platform, this may either be
+ * a single pin or a group of pins where they can be set to a common
+ * function.
+ * @configure: platform specific callback to configure the pinmux entry.
+ */
+struct of_pinmux_ctrl {
+ struct device *dev;
+ struct device_node *node;
+ int (*parse)(const struct of_pinmux_ctrl *ctrl,
+ struct of_pinmux_cfg *cfg);
+ int (*configure)(const struct of_pinmux_ctrl *ctrl,
+ const struct of_pinmux_cfg *cfg);
+};
+
+#ifdef CONFIG_OF
+extern int of_pinmux_parse(const struct of_pinmux_ctrl *ctrl,
+ struct of_pinmux_cfg *cfg);
+#else
+static inline int of_pinmux_parse(const struct of_pinmux_ctrl *ctrl,
+ struct of_pinmux_cfg *cfg)
+{
+ return -ENOSYS;
+}
+#endif /* CONFIG_OF */
+
+#endif /* __OF_PINMUX_H__ */
--
1.7.0.4
^ permalink raw reply related [flat|nested] 69+ messages in thread[parent not found: <1314315824-9687-11-git-send-email-swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>]
* Re: [PATCH v3 10/13] of: add a generic pinmux helper
2011-08-25 23:43 ` Stephen Warren
(?)
@ 2011-08-26 9:16 ` Jamie Iles
-1 siblings, 0 replies; 69+ messages in thread
From: Jamie Iles @ 2011-08-26 9:16 UTC (permalink / raw)
To: Stephen Warren
Cc: Grant Likely, Colin Cross, Erik Gilling, Olof Johansson,
Russell King, Arnd Bergmann,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
linux-tegra-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Belisko Marek, Jamie Iles,
Shawn Guo, Sergei Shtylyov, Linus Walleij
Hi Stephen,
On Thu, Aug 25, 2011 at 05:43:41PM -0600, Stephen Warren wrote:
> From: Jamie Iles <jamie-wmLquQDDieKakBO8gow8eQ@public.gmane.org>
>
> This patch adds a helper function of_pinmux_parse() that can be used to
> extract common pinmux configuration to avoid each platform implementing
> a parsing loop. Platforms supply the node containing the pinmux
> definitions and a platform specific callback for configuring a pingroup.
>
> Signed-off-by: Jamie Iles <jamie-wmLquQDDieKakBO8gow8eQ@public.gmane.org>
> [swarren: Added support for pins property, added parse() callback, use
> dev_err instead of pr_err, related minor changes]
> Signed-off-by: Stephen Warren <swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
> ---
> drivers/of/Kconfig | 5 ++
> drivers/of/Makefile | 1 +
> drivers/of/of_pinmux.c | 109 +++++++++++++++++++++++++++++++++++++++++++++
> include/linux/of_pinmux.h | 74 ++++++++++++++++++++++++++++++
> 4 files changed, 189 insertions(+), 0 deletions(-)
> create mode 100644 drivers/of/of_pinmux.c
> create mode 100644 include/linux/of_pinmux.h
>
> diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig
> index cac63c9..71a19a3 100644
> --- a/drivers/of/Kconfig
> +++ b/drivers/of/Kconfig
> @@ -81,4 +81,9 @@ config OF_PCI_IRQ
> help
> OpenFirmware PCI IRQ routing helpers
>
> +config OF_PINMUX
> + def_bool y
> + help
> + OpenFirmware pin multiplexing helpers
> +
> endmenu # OF
> diff --git a/drivers/of/Makefile b/drivers/of/Makefile
> index dccb117..0666ff3 100644
> --- a/drivers/of/Makefile
> +++ b/drivers/of/Makefile
> @@ -11,3 +11,4 @@ obj-$(CONFIG_OF_SPI) += of_spi.o
> obj-$(CONFIG_OF_MDIO) += of_mdio.o
> obj-$(CONFIG_OF_PCI) += of_pci.o
> obj-$(CONFIG_OF_PCI_IRQ) += of_pci_irq.o
> +obj-$(CONFIG_OF_PINMUX) += of_pinmux.o
> diff --git a/drivers/of/of_pinmux.c b/drivers/of/of_pinmux.c
> new file mode 100644
> index 0000000..8050b8b
> --- /dev/null
> +++ b/drivers/of/of_pinmux.c
> @@ -0,0 +1,109 @@
> +/*
> + * Copyright (c) 2011 Picochip Ltd., Jamie Iles
> + * Copyright (c) 2011 NVIDIA, Inc.
> + *
> + * Generic pinmux bindings for device tree.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +#include <linux/device.h>
> +#include <linux/errno.h>
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/of.h>
> +#include <linux/of_iter_prop.h>
> +#include <linux/of_pinmux.h>
> +
> +/**
> + * of_pinmux_parse - configure a set of pinmux groups for a pinmux controller
> + *
> + * @controller: the controller to configure the pinmux entries for. This
> + * defines the controller device node and the callback for configuring
> + * the pingroups.
> + *
> + * This helper loops over all of the child nodes of a pinmux controller and
> + * collects the configuration for each pinmux group. A pinmux group is
> + * defined as one or more pins that are configured to a common function. This
> + * handles common properties that many platforms may implement, but for
> + * platform specific properties these may be handled in the configure
> + * callback.
> + */
> +int of_pinmux_parse(const struct of_pinmux_ctrl *ctrl,
> + struct of_pinmux_cfg *cfg)
> +{
> + struct device_node *np;
> +
> + if (!ctrl || !ctrl->dev || !ctrl->node || !ctrl->configure)
> + return -EINVAL;
> +
> + for_each_child_of_node(ctrl->node, np) {
> + int ret;
> + bool hadpins = 0;
> + struct of_iter_string_prop iter;
> +
> + cfg->node = np;
> +
> + ret = of_property_read_string(np, "function",
> + &cfg->function);
> + if (ret < 0) {
> + dev_err(ctrl->dev, "no function for node %s\n",
> + np->name);
> + continue;
> + }
> +
> + cfg->flags &= 0;
cfg->flags = 0?
> +
> + if (of_find_property(np, "pull-up", NULL))
> + cfg->flags |= OF_PINMUX_PULL_UP;
> + if (of_find_property(np, "pull-down", NULL))
> + cfg->flags |= OF_PINMUX_PULL_DOWN;
> +
> + if ((cfg->flags & OF_PINMUX_PULL_MASK) ==
> + OF_PINMUX_PULL_MASK) {
> + dev_warn(ctrl->dev, "node %s has both "
> + "pull-up and pull-down properties - "
> + "defaulting to no pull\n",
> + np->name);
For format strings I believe it's preferred to keep it on one long line
so it can at least be grepped for.
> + cfg->flags &= ~OF_PINMUX_PULL_MASK;
> + }
> +
> + if (of_find_property(np, "tristate", NULL))
> + cfg->flags |= OF_PINMUX_TRISTATE;
> +
> + if (ctrl->parse && ctrl->parse(ctrl, cfg)) {
> + dev_warn(ctrl->dev,
> + "failed to parse node %s\n",
> + np->name);
> + continue;
> + }
> +
> + for_each_string_property_value(iter, np, "pins") {
> + hadpins = 1;
> +
> + cfg->pin = iter.value;
> +
> + dev_dbg(ctrl->dev,
> + "configure pin %s func=%s flags=0x%lx\n",
> + cfg->pin, cfg->function, cfg->flags);
> + if (ctrl->configure(ctrl, cfg))
> + dev_warn(ctrl->dev,
> + "failed to configure pin %s\n",
> + cfg->pin);
> + }
> +
> + if (!hadpins)
> + dev_warn(ctrl->dev, "no pins for node %s\n",
> + np->name);
> + }
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(of_pinmux_parse);
> diff --git a/include/linux/of_pinmux.h b/include/linux/of_pinmux.h
> new file mode 100644
> index 0000000..7ccddcf
> --- /dev/null
> +++ b/include/linux/of_pinmux.h
> @@ -0,0 +1,74 @@
> +/*
> + * Copyright (c) 2011 Picochip Ltd., Jamie Iles
> + * Copyright (c) 2011 NVIDIA, Inc.
> + *
> + * Generic pinmux bindings for device tree.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +#ifndef __OF_PINMUX_H__
> +#define __OF_PINMUX_H__
> +
> +struct device_node;
> +
> +#define OF_PINMUX_PULL_UP (1 << 0)
> +#define OF_PINMUX_PULL_DOWN (1 << 1)
> +#define OF_PINMUX_TRISTATE (1 << 2)
> +
> +#define OF_PINMUX_PULL_MASK (OF_PINMUX_PULL_UP | OF_PINMUX_PULL_DOWN)
> +
> +/**
> + * struct of_pinmux_cfg - configuration state for a single pinmux entry.
> + *
> + * @function: the name of the function that the pinmux entry should be
> + * configured to.
> + * @pin: the device_node of the pinmux entry that should be configured.
> + * Platform specific properties that aren't in the generic binding may be
> + * obtained from this device node.
> + * @flags: flags for common pinmux options such as pull and tristate.
The kerneldoc is out of date here.
> + */
> +struct of_pinmux_cfg {
> + struct device_node *node;
> + const char *pin;
> + const char *function;
> + unsigned long flags;
> +};
> +
> +/**
> + * struct of_pinmux_ctrl - platform specific pinmux control state.
> + *
> + * @pinmux: the pinmux device node. All child nodes are required to be the
> + * pinmux entry definitions. Depending on the platform, this may either be
> + * a single pin or a group of pins where they can be set to a common
> + * function.
> + * @configure: platform specific callback to configure the pinmux entry.
and here.
> + */
> +struct of_pinmux_ctrl {
> + struct device *dev;
> + struct device_node *node;
> + int (*parse)(const struct of_pinmux_ctrl *ctrl,
> + struct of_pinmux_cfg *cfg);
> + int (*configure)(const struct of_pinmux_ctrl *ctrl,
> + const struct of_pinmux_cfg *cfg);
> +};
> +
> +#ifdef CONFIG_OF
> +extern int of_pinmux_parse(const struct of_pinmux_ctrl *ctrl,
> + struct of_pinmux_cfg *cfg);
> +#else
> +static inline int of_pinmux_parse(const struct of_pinmux_ctrl *ctrl,
> + struct of_pinmux_cfg *cfg)
> +{
> + return -ENOSYS;
> +}
> +#endif /* CONFIG_OF */
> +
> +#endif /* __OF_PINMUX_H__ */
> --
> 1.7.0.4
>
^ permalink raw reply [flat|nested] 69+ messages in thread* [PATCH v3 10/13] of: add a generic pinmux helper
@ 2011-08-26 9:16 ` Jamie Iles
0 siblings, 0 replies; 69+ messages in thread
From: Jamie Iles @ 2011-08-26 9:16 UTC (permalink / raw)
To: linux-arm-kernel
Hi Stephen,
On Thu, Aug 25, 2011 at 05:43:41PM -0600, Stephen Warren wrote:
> From: Jamie Iles <jamie@jamieiles.com>
>
> This patch adds a helper function of_pinmux_parse() that can be used to
> extract common pinmux configuration to avoid each platform implementing
> a parsing loop. Platforms supply the node containing the pinmux
> definitions and a platform specific callback for configuring a pingroup.
>
> Signed-off-by: Jamie Iles <jamie@jamieiles.com>
> [swarren: Added support for pins property, added parse() callback, use
> dev_err instead of pr_err, related minor changes]
> Signed-off-by: Stephen Warren <swarren@nvidia.com>
> ---
> drivers/of/Kconfig | 5 ++
> drivers/of/Makefile | 1 +
> drivers/of/of_pinmux.c | 109 +++++++++++++++++++++++++++++++++++++++++++++
> include/linux/of_pinmux.h | 74 ++++++++++++++++++++++++++++++
> 4 files changed, 189 insertions(+), 0 deletions(-)
> create mode 100644 drivers/of/of_pinmux.c
> create mode 100644 include/linux/of_pinmux.h
>
> diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig
> index cac63c9..71a19a3 100644
> --- a/drivers/of/Kconfig
> +++ b/drivers/of/Kconfig
> @@ -81,4 +81,9 @@ config OF_PCI_IRQ
> help
> OpenFirmware PCI IRQ routing helpers
>
> +config OF_PINMUX
> + def_bool y
> + help
> + OpenFirmware pin multiplexing helpers
> +
> endmenu # OF
> diff --git a/drivers/of/Makefile b/drivers/of/Makefile
> index dccb117..0666ff3 100644
> --- a/drivers/of/Makefile
> +++ b/drivers/of/Makefile
> @@ -11,3 +11,4 @@ obj-$(CONFIG_OF_SPI) += of_spi.o
> obj-$(CONFIG_OF_MDIO) += of_mdio.o
> obj-$(CONFIG_OF_PCI) += of_pci.o
> obj-$(CONFIG_OF_PCI_IRQ) += of_pci_irq.o
> +obj-$(CONFIG_OF_PINMUX) += of_pinmux.o
> diff --git a/drivers/of/of_pinmux.c b/drivers/of/of_pinmux.c
> new file mode 100644
> index 0000000..8050b8b
> --- /dev/null
> +++ b/drivers/of/of_pinmux.c
> @@ -0,0 +1,109 @@
> +/*
> + * Copyright (c) 2011 Picochip Ltd., Jamie Iles
> + * Copyright (c) 2011 NVIDIA, Inc.
> + *
> + * Generic pinmux bindings for device tree.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +#include <linux/device.h>
> +#include <linux/errno.h>
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/of.h>
> +#include <linux/of_iter_prop.h>
> +#include <linux/of_pinmux.h>
> +
> +/**
> + * of_pinmux_parse - configure a set of pinmux groups for a pinmux controller
> + *
> + * @controller: the controller to configure the pinmux entries for. This
> + * defines the controller device node and the callback for configuring
> + * the pingroups.
> + *
> + * This helper loops over all of the child nodes of a pinmux controller and
> + * collects the configuration for each pinmux group. A pinmux group is
> + * defined as one or more pins that are configured to a common function. This
> + * handles common properties that many platforms may implement, but for
> + * platform specific properties these may be handled in the configure
> + * callback.
> + */
> +int of_pinmux_parse(const struct of_pinmux_ctrl *ctrl,
> + struct of_pinmux_cfg *cfg)
> +{
> + struct device_node *np;
> +
> + if (!ctrl || !ctrl->dev || !ctrl->node || !ctrl->configure)
> + return -EINVAL;
> +
> + for_each_child_of_node(ctrl->node, np) {
> + int ret;
> + bool hadpins = 0;
> + struct of_iter_string_prop iter;
> +
> + cfg->node = np;
> +
> + ret = of_property_read_string(np, "function",
> + &cfg->function);
> + if (ret < 0) {
> + dev_err(ctrl->dev, "no function for node %s\n",
> + np->name);
> + continue;
> + }
> +
> + cfg->flags &= 0;
cfg->flags = 0?
> +
> + if (of_find_property(np, "pull-up", NULL))
> + cfg->flags |= OF_PINMUX_PULL_UP;
> + if (of_find_property(np, "pull-down", NULL))
> + cfg->flags |= OF_PINMUX_PULL_DOWN;
> +
> + if ((cfg->flags & OF_PINMUX_PULL_MASK) ==
> + OF_PINMUX_PULL_MASK) {
> + dev_warn(ctrl->dev, "node %s has both "
> + "pull-up and pull-down properties - "
> + "defaulting to no pull\n",
> + np->name);
For format strings I believe it's preferred to keep it on one long line
so it can at least be grepped for.
> + cfg->flags &= ~OF_PINMUX_PULL_MASK;
> + }
> +
> + if (of_find_property(np, "tristate", NULL))
> + cfg->flags |= OF_PINMUX_TRISTATE;
> +
> + if (ctrl->parse && ctrl->parse(ctrl, cfg)) {
> + dev_warn(ctrl->dev,
> + "failed to parse node %s\n",
> + np->name);
> + continue;
> + }
> +
> + for_each_string_property_value(iter, np, "pins") {
> + hadpins = 1;
> +
> + cfg->pin = iter.value;
> +
> + dev_dbg(ctrl->dev,
> + "configure pin %s func=%s flags=0x%lx\n",
> + cfg->pin, cfg->function, cfg->flags);
> + if (ctrl->configure(ctrl, cfg))
> + dev_warn(ctrl->dev,
> + "failed to configure pin %s\n",
> + cfg->pin);
> + }
> +
> + if (!hadpins)
> + dev_warn(ctrl->dev, "no pins for node %s\n",
> + np->name);
> + }
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(of_pinmux_parse);
> diff --git a/include/linux/of_pinmux.h b/include/linux/of_pinmux.h
> new file mode 100644
> index 0000000..7ccddcf
> --- /dev/null
> +++ b/include/linux/of_pinmux.h
> @@ -0,0 +1,74 @@
> +/*
> + * Copyright (c) 2011 Picochip Ltd., Jamie Iles
> + * Copyright (c) 2011 NVIDIA, Inc.
> + *
> + * Generic pinmux bindings for device tree.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +#ifndef __OF_PINMUX_H__
> +#define __OF_PINMUX_H__
> +
> +struct device_node;
> +
> +#define OF_PINMUX_PULL_UP (1 << 0)
> +#define OF_PINMUX_PULL_DOWN (1 << 1)
> +#define OF_PINMUX_TRISTATE (1 << 2)
> +
> +#define OF_PINMUX_PULL_MASK (OF_PINMUX_PULL_UP | OF_PINMUX_PULL_DOWN)
> +
> +/**
> + * struct of_pinmux_cfg - configuration state for a single pinmux entry.
> + *
> + * @function: the name of the function that the pinmux entry should be
> + * configured to.
> + * @pin: the device_node of the pinmux entry that should be configured.
> + * Platform specific properties that aren't in the generic binding may be
> + * obtained from this device node.
> + * @flags: flags for common pinmux options such as pull and tristate.
The kerneldoc is out of date here.
> + */
> +struct of_pinmux_cfg {
> + struct device_node *node;
> + const char *pin;
> + const char *function;
> + unsigned long flags;
> +};
> +
> +/**
> + * struct of_pinmux_ctrl - platform specific pinmux control state.
> + *
> + * @pinmux: the pinmux device node. All child nodes are required to be the
> + * pinmux entry definitions. Depending on the platform, this may either be
> + * a single pin or a group of pins where they can be set to a common
> + * function.
> + * @configure: platform specific callback to configure the pinmux entry.
and here.
> + */
> +struct of_pinmux_ctrl {
> + struct device *dev;
> + struct device_node *node;
> + int (*parse)(const struct of_pinmux_ctrl *ctrl,
> + struct of_pinmux_cfg *cfg);
> + int (*configure)(const struct of_pinmux_ctrl *ctrl,
> + const struct of_pinmux_cfg *cfg);
> +};
> +
> +#ifdef CONFIG_OF
> +extern int of_pinmux_parse(const struct of_pinmux_ctrl *ctrl,
> + struct of_pinmux_cfg *cfg);
> +#else
> +static inline int of_pinmux_parse(const struct of_pinmux_ctrl *ctrl,
> + struct of_pinmux_cfg *cfg)
> +{
> + return -ENOSYS;
> +}
> +#endif /* CONFIG_OF */
> +
> +#endif /* __OF_PINMUX_H__ */
> --
> 1.7.0.4
>
^ permalink raw reply [flat|nested] 69+ messages in thread* Re: [PATCH v3 10/13] of: add a generic pinmux helper
@ 2011-08-26 9:16 ` Jamie Iles
0 siblings, 0 replies; 69+ messages in thread
From: Jamie Iles @ 2011-08-26 9:16 UTC (permalink / raw)
To: Stephen Warren
Cc: Grant Likely, Colin Cross, Erik Gilling, Olof Johansson,
Russell King, Arnd Bergmann, devicetree-discuss, linux-tegra,
linux-arm-kernel, linux-kernel, Belisko Marek, Jamie Iles,
Shawn Guo, Sergei Shtylyov, Linus Walleij
Hi Stephen,
On Thu, Aug 25, 2011 at 05:43:41PM -0600, Stephen Warren wrote:
> From: Jamie Iles <jamie@jamieiles.com>
>
> This patch adds a helper function of_pinmux_parse() that can be used to
> extract common pinmux configuration to avoid each platform implementing
> a parsing loop. Platforms supply the node containing the pinmux
> definitions and a platform specific callback for configuring a pingroup.
>
> Signed-off-by: Jamie Iles <jamie@jamieiles.com>
> [swarren: Added support for pins property, added parse() callback, use
> dev_err instead of pr_err, related minor changes]
> Signed-off-by: Stephen Warren <swarren@nvidia.com>
> ---
> drivers/of/Kconfig | 5 ++
> drivers/of/Makefile | 1 +
> drivers/of/of_pinmux.c | 109 +++++++++++++++++++++++++++++++++++++++++++++
> include/linux/of_pinmux.h | 74 ++++++++++++++++++++++++++++++
> 4 files changed, 189 insertions(+), 0 deletions(-)
> create mode 100644 drivers/of/of_pinmux.c
> create mode 100644 include/linux/of_pinmux.h
>
> diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig
> index cac63c9..71a19a3 100644
> --- a/drivers/of/Kconfig
> +++ b/drivers/of/Kconfig
> @@ -81,4 +81,9 @@ config OF_PCI_IRQ
> help
> OpenFirmware PCI IRQ routing helpers
>
> +config OF_PINMUX
> + def_bool y
> + help
> + OpenFirmware pin multiplexing helpers
> +
> endmenu # OF
> diff --git a/drivers/of/Makefile b/drivers/of/Makefile
> index dccb117..0666ff3 100644
> --- a/drivers/of/Makefile
> +++ b/drivers/of/Makefile
> @@ -11,3 +11,4 @@ obj-$(CONFIG_OF_SPI) += of_spi.o
> obj-$(CONFIG_OF_MDIO) += of_mdio.o
> obj-$(CONFIG_OF_PCI) += of_pci.o
> obj-$(CONFIG_OF_PCI_IRQ) += of_pci_irq.o
> +obj-$(CONFIG_OF_PINMUX) += of_pinmux.o
> diff --git a/drivers/of/of_pinmux.c b/drivers/of/of_pinmux.c
> new file mode 100644
> index 0000000..8050b8b
> --- /dev/null
> +++ b/drivers/of/of_pinmux.c
> @@ -0,0 +1,109 @@
> +/*
> + * Copyright (c) 2011 Picochip Ltd., Jamie Iles
> + * Copyright (c) 2011 NVIDIA, Inc.
> + *
> + * Generic pinmux bindings for device tree.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +#include <linux/device.h>
> +#include <linux/errno.h>
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/of.h>
> +#include <linux/of_iter_prop.h>
> +#include <linux/of_pinmux.h>
> +
> +/**
> + * of_pinmux_parse - configure a set of pinmux groups for a pinmux controller
> + *
> + * @controller: the controller to configure the pinmux entries for. This
> + * defines the controller device node and the callback for configuring
> + * the pingroups.
> + *
> + * This helper loops over all of the child nodes of a pinmux controller and
> + * collects the configuration for each pinmux group. A pinmux group is
> + * defined as one or more pins that are configured to a common function. This
> + * handles common properties that many platforms may implement, but for
> + * platform specific properties these may be handled in the configure
> + * callback.
> + */
> +int of_pinmux_parse(const struct of_pinmux_ctrl *ctrl,
> + struct of_pinmux_cfg *cfg)
> +{
> + struct device_node *np;
> +
> + if (!ctrl || !ctrl->dev || !ctrl->node || !ctrl->configure)
> + return -EINVAL;
> +
> + for_each_child_of_node(ctrl->node, np) {
> + int ret;
> + bool hadpins = 0;
> + struct of_iter_string_prop iter;
> +
> + cfg->node = np;
> +
> + ret = of_property_read_string(np, "function",
> + &cfg->function);
> + if (ret < 0) {
> + dev_err(ctrl->dev, "no function for node %s\n",
> + np->name);
> + continue;
> + }
> +
> + cfg->flags &= 0;
cfg->flags = 0?
> +
> + if (of_find_property(np, "pull-up", NULL))
> + cfg->flags |= OF_PINMUX_PULL_UP;
> + if (of_find_property(np, "pull-down", NULL))
> + cfg->flags |= OF_PINMUX_PULL_DOWN;
> +
> + if ((cfg->flags & OF_PINMUX_PULL_MASK) ==
> + OF_PINMUX_PULL_MASK) {
> + dev_warn(ctrl->dev, "node %s has both "
> + "pull-up and pull-down properties - "
> + "defaulting to no pull\n",
> + np->name);
For format strings I believe it's preferred to keep it on one long line
so it can at least be grepped for.
> + cfg->flags &= ~OF_PINMUX_PULL_MASK;
> + }
> +
> + if (of_find_property(np, "tristate", NULL))
> + cfg->flags |= OF_PINMUX_TRISTATE;
> +
> + if (ctrl->parse && ctrl->parse(ctrl, cfg)) {
> + dev_warn(ctrl->dev,
> + "failed to parse node %s\n",
> + np->name);
> + continue;
> + }
> +
> + for_each_string_property_value(iter, np, "pins") {
> + hadpins = 1;
> +
> + cfg->pin = iter.value;
> +
> + dev_dbg(ctrl->dev,
> + "configure pin %s func=%s flags=0x%lx\n",
> + cfg->pin, cfg->function, cfg->flags);
> + if (ctrl->configure(ctrl, cfg))
> + dev_warn(ctrl->dev,
> + "failed to configure pin %s\n",
> + cfg->pin);
> + }
> +
> + if (!hadpins)
> + dev_warn(ctrl->dev, "no pins for node %s\n",
> + np->name);
> + }
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(of_pinmux_parse);
> diff --git a/include/linux/of_pinmux.h b/include/linux/of_pinmux.h
> new file mode 100644
> index 0000000..7ccddcf
> --- /dev/null
> +++ b/include/linux/of_pinmux.h
> @@ -0,0 +1,74 @@
> +/*
> + * Copyright (c) 2011 Picochip Ltd., Jamie Iles
> + * Copyright (c) 2011 NVIDIA, Inc.
> + *
> + * Generic pinmux bindings for device tree.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +#ifndef __OF_PINMUX_H__
> +#define __OF_PINMUX_H__
> +
> +struct device_node;
> +
> +#define OF_PINMUX_PULL_UP (1 << 0)
> +#define OF_PINMUX_PULL_DOWN (1 << 1)
> +#define OF_PINMUX_TRISTATE (1 << 2)
> +
> +#define OF_PINMUX_PULL_MASK (OF_PINMUX_PULL_UP | OF_PINMUX_PULL_DOWN)
> +
> +/**
> + * struct of_pinmux_cfg - configuration state for a single pinmux entry.
> + *
> + * @function: the name of the function that the pinmux entry should be
> + * configured to.
> + * @pin: the device_node of the pinmux entry that should be configured.
> + * Platform specific properties that aren't in the generic binding may be
> + * obtained from this device node.
> + * @flags: flags for common pinmux options such as pull and tristate.
The kerneldoc is out of date here.
> + */
> +struct of_pinmux_cfg {
> + struct device_node *node;
> + const char *pin;
> + const char *function;
> + unsigned long flags;
> +};
> +
> +/**
> + * struct of_pinmux_ctrl - platform specific pinmux control state.
> + *
> + * @pinmux: the pinmux device node. All child nodes are required to be the
> + * pinmux entry definitions. Depending on the platform, this may either be
> + * a single pin or a group of pins where they can be set to a common
> + * function.
> + * @configure: platform specific callback to configure the pinmux entry.
and here.
> + */
> +struct of_pinmux_ctrl {
> + struct device *dev;
> + struct device_node *node;
> + int (*parse)(const struct of_pinmux_ctrl *ctrl,
> + struct of_pinmux_cfg *cfg);
> + int (*configure)(const struct of_pinmux_ctrl *ctrl,
> + const struct of_pinmux_cfg *cfg);
> +};
> +
> +#ifdef CONFIG_OF
> +extern int of_pinmux_parse(const struct of_pinmux_ctrl *ctrl,
> + struct of_pinmux_cfg *cfg);
> +#else
> +static inline int of_pinmux_parse(const struct of_pinmux_ctrl *ctrl,
> + struct of_pinmux_cfg *cfg)
> +{
> + return -ENOSYS;
> +}
> +#endif /* CONFIG_OF */
> +
> +#endif /* __OF_PINMUX_H__ */
> --
> 1.7.0.4
>
^ permalink raw reply [flat|nested] 69+ messages in thread
* Re: [PATCH v3 10/13] of: add a generic pinmux helper
2011-08-25 23:43 ` Stephen Warren
(?)
@ 2011-08-29 11:09 ` Linus Walleij
-1 siblings, 0 replies; 69+ messages in thread
From: Linus Walleij @ 2011-08-29 11:09 UTC (permalink / raw)
To: Stephen Warren
Cc: Russell King, Erik Gilling, Sergei Shtylyov, Belisko Marek,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-tegra-u79uwXL29TY76Z2rM5mHXA, Colin Cross,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
On Fri, Aug 26, 2011 at 1:43 AM, Stephen Warren <swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org> wrote:
> diff --git a/drivers/of/of_pinmux.c b/drivers/of/of_pinmux.c
> +int of_pinmux_parse(const struct of_pinmux_ctrl *ctrl,
> + struct of_pinmux_cfg *cfg)
OK...
> +{
> + struct device_node *np;
> +
> + if (!ctrl || !ctrl->dev || !ctrl->node || !ctrl->configure)
> + return -EINVAL;
> +
> + for_each_child_of_node(ctrl->node, np) {
> + int ret;
> + bool hadpins = 0;
> + struct of_iter_string_prop iter;
> +
> + cfg->node = np;
> +
> + ret = of_property_read_string(np, "function",
> + &cfg->function);
> + if (ret < 0) {
> + dev_err(ctrl->dev, "no function for node %s\n",
> + np->name);
> + continue;
> + }
I buy this part.
> +
> + cfg->flags &= 0;
> +
> + if (of_find_property(np, "pull-up", NULL))
> + cfg->flags |= OF_PINMUX_PULL_UP;
> + if (of_find_property(np, "pull-down", NULL))
> + cfg->flags |= OF_PINMUX_PULL_DOWN;
> +
> + if ((cfg->flags & OF_PINMUX_PULL_MASK) ==
> + OF_PINMUX_PULL_MASK) {
> + dev_warn(ctrl->dev, "node %s has both "
> + "pull-up and pull-down properties - "
> + "defaulting to no pull\n",
> + np->name);
> + cfg->flags &= ~OF_PINMUX_PULL_MASK;
> + }
> +
> + if (of_find_property(np, "tristate", NULL))
> + cfg->flags |= OF_PINMUX_TRISTATE;
But what does this stuff has to do with pinmux?
I call this "pin biasing" and it has very little to do with muxing.
If a broader, generic term is to be used, I'd prefer "pin control"
which sort of nails the thing.
> + for_each_string_property_value(iter, np, "pins") {
> + hadpins = 1;
> +
> + cfg->pin = iter.value;
> +
> + dev_dbg(ctrl->dev,
> + "configure pin %s func=%s flags=0x%lx\n",
> + cfg->pin, cfg->function, cfg->flags);
> + if (ctrl->configure(ctrl, cfg))
> + dev_warn(ctrl->dev,
> + "failed to configure pin %s\n",
> + cfg->pin);
> + }
> +
> + if (!hadpins)
> + dev_warn(ctrl->dev, "no pins for node %s\n",
> + np->name);
> + }
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(of_pinmux_parse);
Renamed of_pinctrl_parse I'm happier with it.
> +/**
> + * struct of_pinmux_cfg - configuration state for a single pinmux entry.
> + *
> + * @function: the name of the function that the pinmux entry should be
> + * configured to.
> + * @pin: the device_node of the pinmux entry that should be configured.
> + * Platform specific properties that aren't in the generic binding may be
> + * obtained from this device node.
> + * @flags: flags for common pinmux options such as pull and tristate.
I don't think these things has anything to do with pinmux at all.
But with the struct renamed of_pinctrl_cfg I'm again happier.
> + */
> +struct of_pinmux_cfg {
> + struct device_node *node;
> + const char *pin;
> + const char *function;
> + unsigned long flags;
> +};
The current pinctrl patch set would probably want an unsigned
"position" attribute too. (If we should build on that.)
> +/**
> + * struct of_pinmux_ctrl - platform specific pinmux control state.
> + *
> + * @pinmux: the pinmux device node. All child nodes are required to be the
> + * pinmux entry definitions. Depending on the platform, this may either be
> + * a single pin or a group of pins where they can be set to a common
> + * function.
> + * @configure: platform specific callback to configure the pinmux entry.
> + */
> +struct of_pinmux_ctrl {
> + struct device *dev;
> + struct device_node *node;
> + int (*parse)(const struct of_pinmux_ctrl *ctrl,
> + struct of_pinmux_cfg *cfg);
> + int (*configure)(const struct of_pinmux_ctrl *ctrl,
> + const struct of_pinmux_cfg *cfg);
> +};
s/pinmux/pinctrl/g
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 69+ messages in thread* [PATCH v3 10/13] of: add a generic pinmux helper
@ 2011-08-29 11:09 ` Linus Walleij
0 siblings, 0 replies; 69+ messages in thread
From: Linus Walleij @ 2011-08-29 11:09 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, Aug 26, 2011 at 1:43 AM, Stephen Warren <swarren@nvidia.com> wrote:
> diff --git a/drivers/of/of_pinmux.c b/drivers/of/of_pinmux.c
> +int of_pinmux_parse(const struct of_pinmux_ctrl *ctrl,
> + ? ? ? ? ? ? ? ? ? struct of_pinmux_cfg *cfg)
OK...
> +{
> + ? ? ? struct device_node *np;
> +
> + ? ? ? if (!ctrl || !ctrl->dev || !ctrl->node || !ctrl->configure)
> + ? ? ? ? ? ? ? return -EINVAL;
> +
> + ? ? ? for_each_child_of_node(ctrl->node, np) {
> + ? ? ? ? ? ? ? int ret;
> + ? ? ? ? ? ? ? bool hadpins = 0;
> + ? ? ? ? ? ? ? struct of_iter_string_prop iter;
> +
> + ? ? ? ? ? ? ? cfg->node = np;
> +
> + ? ? ? ? ? ? ? ret = of_property_read_string(np, "function",
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? &cfg->function);
> + ? ? ? ? ? ? ? if (ret < 0) {
> + ? ? ? ? ? ? ? ? ? ? ? dev_err(ctrl->dev, "no function for node %s\n",
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? np->name);
> + ? ? ? ? ? ? ? ? ? ? ? continue;
> + ? ? ? ? ? ? ? }
I buy this part.
> +
> + ? ? ? ? ? ? ? cfg->flags &= 0;
> +
> + ? ? ? ? ? ? ? if (of_find_property(np, "pull-up", NULL))
> + ? ? ? ? ? ? ? ? ? ? ? cfg->flags |= OF_PINMUX_PULL_UP;
> + ? ? ? ? ? ? ? if (of_find_property(np, "pull-down", NULL))
> + ? ? ? ? ? ? ? ? ? ? ? cfg->flags |= OF_PINMUX_PULL_DOWN;
> +
> + ? ? ? ? ? ? ? if ((cfg->flags & OF_PINMUX_PULL_MASK) ==
> + ? ? ? ? ? ? ? ? ? OF_PINMUX_PULL_MASK) {
> + ? ? ? ? ? ? ? ? ? ? ? dev_warn(ctrl->dev, "node %s has both "
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?"pull-up and pull-down properties - "
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?"defaulting to no pull\n",
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?np->name);
> + ? ? ? ? ? ? ? ? ? ? ? cfg->flags &= ~OF_PINMUX_PULL_MASK;
> + ? ? ? ? ? ? ? }
> +
> + ? ? ? ? ? ? ? if (of_find_property(np, "tristate", NULL))
> + ? ? ? ? ? ? ? ? ? ? ? cfg->flags |= OF_PINMUX_TRISTATE;
But what does this stuff has to do with pinmux?
I call this "pin biasing" and it has very little to do with muxing.
If a broader, generic term is to be used, I'd prefer "pin control"
which sort of nails the thing.
> + ? ? ? ? ? ? ? for_each_string_property_value(iter, np, "pins") {
> + ? ? ? ? ? ? ? ? ? ? ? hadpins = 1;
> +
> + ? ? ? ? ? ? ? ? ? ? ? cfg->pin = iter.value;
> +
> + ? ? ? ? ? ? ? ? ? ? ? dev_dbg(ctrl->dev,
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? "configure pin %s func=%s flags=0x%lx\n",
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? cfg->pin, cfg->function, cfg->flags);
> + ? ? ? ? ? ? ? ? ? ? ? if (ctrl->configure(ctrl, cfg))
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? dev_warn(ctrl->dev,
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?"failed to configure pin %s\n",
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?cfg->pin);
> + ? ? ? ? ? ? ? }
> +
> + ? ? ? ? ? ? ? if (!hadpins)
> + ? ? ? ? ? ? ? ? ? ? ? dev_warn(ctrl->dev, "no pins for node %s\n",
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?np->name);
> + ? ? ? }
> +
> + ? ? ? return 0;
> +}
> +EXPORT_SYMBOL_GPL(of_pinmux_parse);
Renamed of_pinctrl_parse I'm happier with it.
> +/**
> + * struct of_pinmux_cfg - configuration state for a single pinmux entry.
> + *
> + * @function: the name of the function that the pinmux entry should be
> + * ? ? configured to.
> + * @pin: the device_node of the pinmux entry that should be configured.
> + * ? ? Platform specific properties that aren't in the generic binding may be
> + * ? ? obtained from this device node.
> + * @flags: flags for common pinmux options such as pull and tristate.
I don't think these things has anything to do with pinmux at all.
But with the struct renamed of_pinctrl_cfg I'm again happier.
> + */
> +struct of_pinmux_cfg {
> + ? ? ? struct device_node ? ? ?*node;
> + ? ? ? const char ? ? ? ? ? ? ?*pin;
> + ? ? ? const char ? ? ? ? ? ? ?*function;
> + ? ? ? unsigned long ? ? ? ? ? flags;
> +};
The current pinctrl patch set would probably want an unsigned
"position" attribute too. (If we should build on that.)
> +/**
> + * struct of_pinmux_ctrl - platform specific pinmux control state.
> + *
> + * @pinmux: the pinmux device node. ?All child nodes are required to be the
> + * ? ? pinmux entry definitions. ?Depending on the platform, this may either be
> + * ? ? a single pin or a group of pins where they can be set to a common
> + * ? ? function.
> + * @configure: platform specific callback to configure the pinmux entry.
> + */
> +struct of_pinmux_ctrl {
> + ? ? ? struct device ? ? ?*dev;
> + ? ? ? struct device_node *node;
> + ? ? ? int ? ? ? ? ? ? ? ?(*parse)(const struct of_pinmux_ctrl *ctrl,
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? struct of_pinmux_cfg *cfg);
> + ? ? ? int ? ? ? ? ? ? ? ?(*configure)(const struct of_pinmux_ctrl *ctrl,
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? const struct of_pinmux_cfg *cfg);
> +};
s/pinmux/pinctrl/g
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 69+ messages in thread* Re: [PATCH v3 10/13] of: add a generic pinmux helper
@ 2011-08-29 11:09 ` Linus Walleij
0 siblings, 0 replies; 69+ messages in thread
From: Linus Walleij @ 2011-08-29 11:09 UTC (permalink / raw)
To: Stephen Warren
Cc: Grant Likely, Colin Cross, Erik Gilling, Olof Johansson,
Russell King, Arnd Bergmann, devicetree-discuss, linux-tegra,
linux-arm-kernel, linux-kernel, Belisko Marek, Jamie Iles,
Shawn Guo, Sergei Shtylyov
On Fri, Aug 26, 2011 at 1:43 AM, Stephen Warren <swarren@nvidia.com> wrote:
> diff --git a/drivers/of/of_pinmux.c b/drivers/of/of_pinmux.c
> +int of_pinmux_parse(const struct of_pinmux_ctrl *ctrl,
> + struct of_pinmux_cfg *cfg)
OK...
> +{
> + struct device_node *np;
> +
> + if (!ctrl || !ctrl->dev || !ctrl->node || !ctrl->configure)
> + return -EINVAL;
> +
> + for_each_child_of_node(ctrl->node, np) {
> + int ret;
> + bool hadpins = 0;
> + struct of_iter_string_prop iter;
> +
> + cfg->node = np;
> +
> + ret = of_property_read_string(np, "function",
> + &cfg->function);
> + if (ret < 0) {
> + dev_err(ctrl->dev, "no function for node %s\n",
> + np->name);
> + continue;
> + }
I buy this part.
> +
> + cfg->flags &= 0;
> +
> + if (of_find_property(np, "pull-up", NULL))
> + cfg->flags |= OF_PINMUX_PULL_UP;
> + if (of_find_property(np, "pull-down", NULL))
> + cfg->flags |= OF_PINMUX_PULL_DOWN;
> +
> + if ((cfg->flags & OF_PINMUX_PULL_MASK) ==
> + OF_PINMUX_PULL_MASK) {
> + dev_warn(ctrl->dev, "node %s has both "
> + "pull-up and pull-down properties - "
> + "defaulting to no pull\n",
> + np->name);
> + cfg->flags &= ~OF_PINMUX_PULL_MASK;
> + }
> +
> + if (of_find_property(np, "tristate", NULL))
> + cfg->flags |= OF_PINMUX_TRISTATE;
But what does this stuff has to do with pinmux?
I call this "pin biasing" and it has very little to do with muxing.
If a broader, generic term is to be used, I'd prefer "pin control"
which sort of nails the thing.
> + for_each_string_property_value(iter, np, "pins") {
> + hadpins = 1;
> +
> + cfg->pin = iter.value;
> +
> + dev_dbg(ctrl->dev,
> + "configure pin %s func=%s flags=0x%lx\n",
> + cfg->pin, cfg->function, cfg->flags);
> + if (ctrl->configure(ctrl, cfg))
> + dev_warn(ctrl->dev,
> + "failed to configure pin %s\n",
> + cfg->pin);
> + }
> +
> + if (!hadpins)
> + dev_warn(ctrl->dev, "no pins for node %s\n",
> + np->name);
> + }
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(of_pinmux_parse);
Renamed of_pinctrl_parse I'm happier with it.
> +/**
> + * struct of_pinmux_cfg - configuration state for a single pinmux entry.
> + *
> + * @function: the name of the function that the pinmux entry should be
> + * configured to.
> + * @pin: the device_node of the pinmux entry that should be configured.
> + * Platform specific properties that aren't in the generic binding may be
> + * obtained from this device node.
> + * @flags: flags for common pinmux options such as pull and tristate.
I don't think these things has anything to do with pinmux at all.
But with the struct renamed of_pinctrl_cfg I'm again happier.
> + */
> +struct of_pinmux_cfg {
> + struct device_node *node;
> + const char *pin;
> + const char *function;
> + unsigned long flags;
> +};
The current pinctrl patch set would probably want an unsigned
"position" attribute too. (If we should build on that.)
> +/**
> + * struct of_pinmux_ctrl - platform specific pinmux control state.
> + *
> + * @pinmux: the pinmux device node. All child nodes are required to be the
> + * pinmux entry definitions. Depending on the platform, this may either be
> + * a single pin or a group of pins where they can be set to a common
> + * function.
> + * @configure: platform specific callback to configure the pinmux entry.
> + */
> +struct of_pinmux_ctrl {
> + struct device *dev;
> + struct device_node *node;
> + int (*parse)(const struct of_pinmux_ctrl *ctrl,
> + struct of_pinmux_cfg *cfg);
> + int (*configure)(const struct of_pinmux_ctrl *ctrl,
> + const struct of_pinmux_cfg *cfg);
> +};
s/pinmux/pinctrl/g
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 69+ messages in thread[parent not found: <CACRpkdaTiWEtgjVOhUKeXhpiESvrWyz97p5j_PHe3MvEM4UaCw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>]
* RE: [PATCH v3 10/13] of: add a generic pinmux helper
2011-08-29 11:09 ` Linus Walleij
(?)
@ 2011-08-29 21:46 ` Stephen Warren
-1 siblings, 0 replies; 69+ messages in thread
From: Stephen Warren @ 2011-08-29 21:46 UTC (permalink / raw)
To: Linus Walleij
Cc: Grant Likely, Colin Cross, Erik Gilling, Olof Johansson,
Russell King, Arnd Bergmann,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
linux-tegra-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Belisko Marek, Jamie Iles,
Shawn Guo, Sergei Shtylyov
Linus Walleij wrote at Monday, August 29, 2011 5:09 AM:
> On Fri, Aug 26, 2011 at 1:43 AM, Stephen Warren <swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org> wrote:
>
> > diff --git a/drivers/of/of_pinmux.c b/drivers/of/of_pinmux.c
>
> > +int of_pinmux_parse(const struct of_pinmux_ctrl *ctrl,
> > + struct of_pinmux_cfg *cfg)
>
> OK...
>
> > +{
> > + struct device_node *np;
> > +
> > + if (!ctrl || !ctrl->dev || !ctrl->node || !ctrl->configure)
> > + return -EINVAL;
> > +
> > + for_each_child_of_node(ctrl->node, np) {
> > + int ret;
> > + bool hadpins = 0;
> > + struct of_iter_string_prop iter;
> > +
> > + cfg->node = np;
> > +
> > + ret = of_property_read_string(np, "function",
> > + &cfg->function);
> > + if (ret < 0) {
> > + dev_err(ctrl->dev, "no function for node %s\n",
> > + np->name);
> > + continue;
> > + }
>
> I buy this part.
>
> > +
> > + cfg->flags &= 0;
> > +
> > + if (of_find_property(np, "pull-up", NULL))
> > + cfg->flags |= OF_PINMUX_PULL_UP;
> > + if (of_find_property(np, "pull-down", NULL))
> > + cfg->flags |= OF_PINMUX_PULL_DOWN;
> > +
> > + if ((cfg->flags & OF_PINMUX_PULL_MASK) ==
> > + OF_PINMUX_PULL_MASK) {
> > + dev_warn(ctrl->dev, "node %s has both "
> > + "pull-up and pull-down properties - "
> > + "defaulting to no pull\n",
> > + np->name);
> > + cfg->flags &= ~OF_PINMUX_PULL_MASK;
> > + }
> > +
> > + if (of_find_property(np, "tristate", NULL))
> > + cfg->flags |= OF_PINMUX_TRISTATE;
>
> But what does this stuff has to do with pinmux?
>
> I call this "pin biasing" and it has very little to do with muxing.
>
> If a broader, generic term is to be used, I'd prefer "pin control"
> which sort of nails the thing.
>
> > + for_each_string_property_value(iter, np, "pins") {
> > + hadpins = 1;
> > +
> > + cfg->pin = iter.value;
> > +
> > + dev_dbg(ctrl->dev,
> > + "configure pin %s func=%s flags=0x%lx\n",
> > + cfg->pin, cfg->function, cfg->flags);
> > + if (ctrl->configure(ctrl, cfg))
> > + dev_warn(ctrl->dev,
> > + "failed to configure pin %s\n",
> > + cfg->pin);
> > + }
> > +
> > + if (!hadpins)
> > + dev_warn(ctrl->dev, "no pins for node %s\n",
> > + np->name);
> > + }
> > +
> > + return 0;
> > +}
> > +EXPORT_SYMBOL_GPL(of_pinmux_parse);
>
> Renamed of_pinctrl_parse I'm happier with it.
Well, it's not just that; the struct contains the function field to
select for each pingroup, so it's not just pinctrl either.
> > +/**
> > + * struct of_pinmux_cfg - configuration state for a single pinmux entry.
> > + *
> > + * @function: the name of the function that the pinmux entry should be
> > + * configured to.
> > + * @pin: the device_node of the pinmux entry that should be configured.
> > + * Platform specific properties that aren't in the generic binding may be
> > + * obtained from this device node.
> > + * @flags: flags for common pinmux options such as pull and tristate.
>
> I don't think these things has anything to do with pinmux at all.
>
> But with the struct renamed of_pinctrl_cfg I'm again happier.
>
> > + */
> > +struct of_pinmux_cfg {
> > + struct device_node *node;
> > + const char *pin;
> > + const char *function;
> > + unsigned long flags;
> > +};
>
> The current pinctrl patch set would probably want an unsigned
> "position" attribute too. (If we should build on that.)
This does beg the question I asked previously:
The intent of this patch was to provide a way for devicetree to set the
complete initial state of the pinmux, in a SoC-specific fashion, without
interaction with the pinmux API.
However, I'm guessing you see the pinmux driver as not touching HW at
boot at all, and never programming anything except in response to a
driver calling pinmux_get()/pinmux_enable()?
In the former case, this code and related bindings wouldn't be influenced
by the pinmux API at all (and indeed arguably never should be, since DT
is supposed to be oriented purely at HW, and not influenced by driver
design). This approach might make the pinmux API mostly relevant only
for drivers that actively change between configurations at run-time, and
not for drivers that don't need dynamic muxing.
However, in the latter case, this code should be part of the pinmux core,
and my patches to Tegra's pinmux driver dropped. It'd be difficult to
define a pinmux binding that wasn't influenced by the pinmux API's needs
in this case.
So, that's probably something we have to resolve first.
--
nvpublic
^ permalink raw reply [flat|nested] 69+ messages in thread* [PATCH v3 10/13] of: add a generic pinmux helper
@ 2011-08-29 21:46 ` Stephen Warren
0 siblings, 0 replies; 69+ messages in thread
From: Stephen Warren @ 2011-08-29 21:46 UTC (permalink / raw)
To: linux-arm-kernel
Linus Walleij wrote at Monday, August 29, 2011 5:09 AM:
> On Fri, Aug 26, 2011 at 1:43 AM, Stephen Warren <swarren@nvidia.com> wrote:
>
> > diff --git a/drivers/of/of_pinmux.c b/drivers/of/of_pinmux.c
>
> > +int of_pinmux_parse(const struct of_pinmux_ctrl *ctrl,
> > + ? ? ? ? ? ? ? ? ? struct of_pinmux_cfg *cfg)
>
> OK...
>
> > +{
> > + ? ? ? struct device_node *np;
> > +
> > + ? ? ? if (!ctrl || !ctrl->dev || !ctrl->node || !ctrl->configure)
> > + ? ? ? ? ? ? ? return -EINVAL;
> > +
> > + ? ? ? for_each_child_of_node(ctrl->node, np) {
> > + ? ? ? ? ? ? ? int ret;
> > + ? ? ? ? ? ? ? bool hadpins = 0;
> > + ? ? ? ? ? ? ? struct of_iter_string_prop iter;
> > +
> > + ? ? ? ? ? ? ? cfg->node = np;
> > +
> > + ? ? ? ? ? ? ? ret = of_property_read_string(np, "function",
> > + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? &cfg->function);
> > + ? ? ? ? ? ? ? if (ret < 0) {
> > + ? ? ? ? ? ? ? ? ? ? ? dev_err(ctrl->dev, "no function for node %s\n",
> > + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? np->name);
> > + ? ? ? ? ? ? ? ? ? ? ? continue;
> > + ? ? ? ? ? ? ? }
>
> I buy this part.
>
> > +
> > + ? ? ? ? ? ? ? cfg->flags &= 0;
> > +
> > + ? ? ? ? ? ? ? if (of_find_property(np, "pull-up", NULL))
> > + ? ? ? ? ? ? ? ? ? ? ? cfg->flags |= OF_PINMUX_PULL_UP;
> > + ? ? ? ? ? ? ? if (of_find_property(np, "pull-down", NULL))
> > + ? ? ? ? ? ? ? ? ? ? ? cfg->flags |= OF_PINMUX_PULL_DOWN;
> > +
> > + ? ? ? ? ? ? ? if ((cfg->flags & OF_PINMUX_PULL_MASK) ==
> > + ? ? ? ? ? ? ? ? ? OF_PINMUX_PULL_MASK) {
> > + ? ? ? ? ? ? ? ? ? ? ? dev_warn(ctrl->dev, "node %s has both "
> > + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?"pull-up and pull-down properties - "
> > + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?"defaulting to no pull\n",
> > + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?np->name);
> > + ? ? ? ? ? ? ? ? ? ? ? cfg->flags &= ~OF_PINMUX_PULL_MASK;
> > + ? ? ? ? ? ? ? }
> > +
> > + ? ? ? ? ? ? ? if (of_find_property(np, "tristate", NULL))
> > + ? ? ? ? ? ? ? ? ? ? ? cfg->flags |= OF_PINMUX_TRISTATE;
>
> But what does this stuff has to do with pinmux?
>
> I call this "pin biasing" and it has very little to do with muxing.
>
> If a broader, generic term is to be used, I'd prefer "pin control"
> which sort of nails the thing.
>
> > + ? ? ? ? ? ? ? for_each_string_property_value(iter, np, "pins") {
> > + ? ? ? ? ? ? ? ? ? ? ? hadpins = 1;
> > +
> > + ? ? ? ? ? ? ? ? ? ? ? cfg->pin = iter.value;
> > +
> > + ? ? ? ? ? ? ? ? ? ? ? dev_dbg(ctrl->dev,
> > + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? "configure pin %s func=%s flags=0x%lx\n",
> > + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? cfg->pin, cfg->function, cfg->flags);
> > + ? ? ? ? ? ? ? ? ? ? ? if (ctrl->configure(ctrl, cfg))
> > + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? dev_warn(ctrl->dev,
> > + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?"failed to configure pin %s\n",
> > + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?cfg->pin);
> > + ? ? ? ? ? ? ? }
> > +
> > + ? ? ? ? ? ? ? if (!hadpins)
> > + ? ? ? ? ? ? ? ? ? ? ? dev_warn(ctrl->dev, "no pins for node %s\n",
> > + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?np->name);
> > + ? ? ? }
> > +
> > + ? ? ? return 0;
> > +}
> > +EXPORT_SYMBOL_GPL(of_pinmux_parse);
>
> Renamed of_pinctrl_parse I'm happier with it.
Well, it's not just that; the struct contains the function field to
select for each pingroup, so it's not just pinctrl either.
> > +/**
> > + * struct of_pinmux_cfg - configuration state for a single pinmux entry.
> > + *
> > + * @function: the name of the function that the pinmux entry should be
> > + * ? ? configured to.
> > + * @pin: the device_node of the pinmux entry that should be configured.
> > + * ? ? Platform specific properties that aren't in the generic binding may be
> > + * ? ? obtained from this device node.
> > + * @flags: flags for common pinmux options such as pull and tristate.
>
> I don't think these things has anything to do with pinmux at all.
>
> But with the struct renamed of_pinctrl_cfg I'm again happier.
>
> > + */
> > +struct of_pinmux_cfg {
> > + ? ? ? struct device_node ? ? ?*node;
> > + ? ? ? const char ? ? ? ? ? ? ?*pin;
> > + ? ? ? const char ? ? ? ? ? ? ?*function;
> > + ? ? ? unsigned long ? ? ? ? ? flags;
> > +};
>
> The current pinctrl patch set would probably want an unsigned
> "position" attribute too. (If we should build on that.)
This does beg the question I asked previously:
The intent of this patch was to provide a way for devicetree to set the
complete initial state of the pinmux, in a SoC-specific fashion, without
interaction with the pinmux API.
However, I'm guessing you see the pinmux driver as not touching HW at
boot at all, and never programming anything except in response to a
driver calling pinmux_get()/pinmux_enable()?
In the former case, this code and related bindings wouldn't be influenced
by the pinmux API at all (and indeed arguably never should be, since DT
is supposed to be oriented purely at HW, and not influenced by driver
design). This approach might make the pinmux API mostly relevant only
for drivers that actively change between configurations at run-time, and
not for drivers that don't need dynamic muxing.
However, in the latter case, this code should be part of the pinmux core,
and my patches to Tegra's pinmux driver dropped. It'd be difficult to
define a pinmux binding that wasn't influenced by the pinmux API's needs
in this case.
So, that's probably something we have to resolve first.
--
nvpublic
^ permalink raw reply [flat|nested] 69+ messages in thread* RE: [PATCH v3 10/13] of: add a generic pinmux helper
@ 2011-08-29 21:46 ` Stephen Warren
0 siblings, 0 replies; 69+ messages in thread
From: Stephen Warren @ 2011-08-29 21:46 UTC (permalink / raw)
To: Linus Walleij
Cc: Grant Likely, Colin Cross, Erik Gilling, Olof Johansson,
Russell King, Arnd Bergmann, devicetree-discuss, linux-tegra,
linux-arm-kernel, linux-kernel, Belisko Marek, Jamie Iles,
Shawn Guo, Sergei Shtylyov
Linus Walleij wrote at Monday, August 29, 2011 5:09 AM:
> On Fri, Aug 26, 2011 at 1:43 AM, Stephen Warren <swarren@nvidia.com> wrote:
>
> > diff --git a/drivers/of/of_pinmux.c b/drivers/of/of_pinmux.c
>
> > +int of_pinmux_parse(const struct of_pinmux_ctrl *ctrl,
> > + struct of_pinmux_cfg *cfg)
>
> OK...
>
> > +{
> > + struct device_node *np;
> > +
> > + if (!ctrl || !ctrl->dev || !ctrl->node || !ctrl->configure)
> > + return -EINVAL;
> > +
> > + for_each_child_of_node(ctrl->node, np) {
> > + int ret;
> > + bool hadpins = 0;
> > + struct of_iter_string_prop iter;
> > +
> > + cfg->node = np;
> > +
> > + ret = of_property_read_string(np, "function",
> > + &cfg->function);
> > + if (ret < 0) {
> > + dev_err(ctrl->dev, "no function for node %s\n",
> > + np->name);
> > + continue;
> > + }
>
> I buy this part.
>
> > +
> > + cfg->flags &= 0;
> > +
> > + if (of_find_property(np, "pull-up", NULL))
> > + cfg->flags |= OF_PINMUX_PULL_UP;
> > + if (of_find_property(np, "pull-down", NULL))
> > + cfg->flags |= OF_PINMUX_PULL_DOWN;
> > +
> > + if ((cfg->flags & OF_PINMUX_PULL_MASK) ==
> > + OF_PINMUX_PULL_MASK) {
> > + dev_warn(ctrl->dev, "node %s has both "
> > + "pull-up and pull-down properties - "
> > + "defaulting to no pull\n",
> > + np->name);
> > + cfg->flags &= ~OF_PINMUX_PULL_MASK;
> > + }
> > +
> > + if (of_find_property(np, "tristate", NULL))
> > + cfg->flags |= OF_PINMUX_TRISTATE;
>
> But what does this stuff has to do with pinmux?
>
> I call this "pin biasing" and it has very little to do with muxing.
>
> If a broader, generic term is to be used, I'd prefer "pin control"
> which sort of nails the thing.
>
> > + for_each_string_property_value(iter, np, "pins") {
> > + hadpins = 1;
> > +
> > + cfg->pin = iter.value;
> > +
> > + dev_dbg(ctrl->dev,
> > + "configure pin %s func=%s flags=0x%lx\n",
> > + cfg->pin, cfg->function, cfg->flags);
> > + if (ctrl->configure(ctrl, cfg))
> > + dev_warn(ctrl->dev,
> > + "failed to configure pin %s\n",
> > + cfg->pin);
> > + }
> > +
> > + if (!hadpins)
> > + dev_warn(ctrl->dev, "no pins for node %s\n",
> > + np->name);
> > + }
> > +
> > + return 0;
> > +}
> > +EXPORT_SYMBOL_GPL(of_pinmux_parse);
>
> Renamed of_pinctrl_parse I'm happier with it.
Well, it's not just that; the struct contains the function field to
select for each pingroup, so it's not just pinctrl either.
> > +/**
> > + * struct of_pinmux_cfg - configuration state for a single pinmux entry.
> > + *
> > + * @function: the name of the function that the pinmux entry should be
> > + * configured to.
> > + * @pin: the device_node of the pinmux entry that should be configured.
> > + * Platform specific properties that aren't in the generic binding may be
> > + * obtained from this device node.
> > + * @flags: flags for common pinmux options such as pull and tristate.
>
> I don't think these things has anything to do with pinmux at all.
>
> But with the struct renamed of_pinctrl_cfg I'm again happier.
>
> > + */
> > +struct of_pinmux_cfg {
> > + struct device_node *node;
> > + const char *pin;
> > + const char *function;
> > + unsigned long flags;
> > +};
>
> The current pinctrl patch set would probably want an unsigned
> "position" attribute too. (If we should build on that.)
This does beg the question I asked previously:
The intent of this patch was to provide a way for devicetree to set the
complete initial state of the pinmux, in a SoC-specific fashion, without
interaction with the pinmux API.
However, I'm guessing you see the pinmux driver as not touching HW at
boot at all, and never programming anything except in response to a
driver calling pinmux_get()/pinmux_enable()?
In the former case, this code and related bindings wouldn't be influenced
by the pinmux API at all (and indeed arguably never should be, since DT
is supposed to be oriented purely at HW, and not influenced by driver
design). This approach might make the pinmux API mostly relevant only
for drivers that actively change between configurations at run-time, and
not for drivers that don't need dynamic muxing.
However, in the latter case, this code should be part of the pinmux core,
and my patches to Tegra's pinmux driver dropped. It'd be difficult to
define a pinmux binding that wasn't influenced by the pinmux API's needs
in this case.
So, that's probably something we have to resolve first.
--
nvpublic
^ permalink raw reply [flat|nested] 69+ messages in thread[parent not found: <74CDBE0F657A3D45AFBB94109FB122FF04B3279BEB-C7FfzLzN0UxDw2glCA4ptUEOCMrvLtNR@public.gmane.org>]
* Re: [PATCH v3 10/13] of: add a generic pinmux helper
2011-08-29 21:46 ` Stephen Warren
(?)
@ 2011-09-01 11:30 ` Linus Walleij
-1 siblings, 0 replies; 69+ messages in thread
From: Linus Walleij @ 2011-09-01 11:30 UTC (permalink / raw)
To: Stephen Warren
Cc: Grant Likely, Colin Cross, Erik Gilling, Olof Johansson,
Russell King, Arnd Bergmann,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
linux-tegra-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Belisko Marek, Jamie Iles,
Shawn Guo, Sergei Shtylyov
On Mon, Aug 29, 2011 at 11:46 PM, Stephen Warren <swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org> wrote:
>> > +EXPORT_SYMBOL_GPL(of_pinmux_parse);
>>
>> Renamed of_pinctrl_parse I'm happier with it.
>
> Well, it's not just that; the struct contains the function field to
> select for each pingroup, so it's not just pinctrl either.
OK as of my thinking in the v6 pin control patch set groups
are an abstract concept that is part of pin control and pin
definitions (does not need to be used for muxing, could be
anything you want to do with pins) so that sorts it out I guess?
So in line with that terminology I think this should be
named pinctrl.
>> The current pinctrl patch set would probably want an unsigned
>> "position" attribute too. (If we should build on that.)
>
> This does beg the question I asked previously:
>
> The intent of this patch was to provide a way for devicetree to set the
> complete initial state of the pinmux, in a SoC-specific fashion, without
> interaction with the pinmux API.
>
> However, I'm guessing you see the pinmux driver as not touching HW at
> boot at all, and never programming anything except in response to a
> driver calling pinmux_get()/pinmux_enable()?
Since the pin control driver is (supposedly) the only driver that knows
about the register range dealing with muxing, all kind of fiddling
with these registers that are *necessary* on boot (e.g. to get the
thing up in a known state) need to be in the pincontrol driver.
So it may touch hardware on boot, i.e. write default values,
even though one may argue that the boot loader should have
taken care about such things, it's now always the case in
practice.
> In the former case, this code and related bindings wouldn't be influenced
> by the pinmux API at all (and indeed arguably never should be, since DT
> is supposed to be oriented purely at HW, and not influenced by driver
> design). This approach might make the pinmux API mostly relevant only
> for drivers that actively change between configurations at run-time, and
> not for drivers that don't need dynamic muxing.
Platforms that do not need dynamic muxing should be using it
if they need to configure default states of the pins at boot I think.
> However, in the latter case, this code should be part of the pinmux core,
> and my patches to Tegra's pinmux driver dropped. It'd be difficult to
> define a pinmux binding that wasn't influenced by the pinmux API's needs
> in this case.
Well that depends on what you want to do.
The patch subject seems to suggest that all SoCs should use this,
not just the Tegra driver. If it had the subject "of: add a tegra
pinmux helper" and functions named of_tegra_pinmux_parse() and
so on I wouldn't have any objections whatsoever.
If however you want to create a DT binding that should be used by
anyone (as indicated by the subject) it must use abstract concepts of
some kind and then I have opinions on how to name things and
some idea that I'd like them to correspond to what the pin control
subsystem will call things.
For example not call things dealing with biasing as part of
something called "pinmux", since in the pin controller
subsystem I'm envisioning I'm striving to separation of
concerns to the point where biasing and muxing are
completely orthogonal concepts, though they might be
using the same abstract concept of pin groups...
I don't know if I'm getting across properly, I'm trying
my best.
Thanks,
Linus Walleij
^ permalink raw reply [flat|nested] 69+ messages in thread
* [PATCH v3 10/13] of: add a generic pinmux helper
@ 2011-09-01 11:30 ` Linus Walleij
0 siblings, 0 replies; 69+ messages in thread
From: Linus Walleij @ 2011-09-01 11:30 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, Aug 29, 2011 at 11:46 PM, Stephen Warren <swarren@nvidia.com> wrote:
>> > +EXPORT_SYMBOL_GPL(of_pinmux_parse);
>>
>> Renamed of_pinctrl_parse I'm happier with it.
>
> Well, it's not just that; the struct contains the function field to
> select for each pingroup, so it's not just pinctrl either.
OK as of my thinking in the v6 pin control patch set groups
are an abstract concept that is part of pin control and pin
definitions (does not need to be used for muxing, could be
anything you want to do with pins) so that sorts it out I guess?
So in line with that terminology I think this should be
named pinctrl.
>> The current pinctrl patch set would probably want an unsigned
>> "position" attribute too. (If we should build on that.)
>
> This does beg the question I asked previously:
>
> The intent of this patch was to provide a way for devicetree to set the
> complete initial state of the pinmux, in a SoC-specific fashion, without
> interaction with the pinmux API.
>
> However, I'm guessing you see the pinmux driver as not touching HW at
> boot at all, and never programming anything except in response to a
> driver calling pinmux_get()/pinmux_enable()?
Since the pin control driver is (supposedly) the only driver that knows
about the register range dealing with muxing, all kind of fiddling
with these registers that are *necessary* on boot (e.g. to get the
thing up in a known state) need to be in the pincontrol driver.
So it may touch hardware on boot, i.e. write default values,
even though one may argue that the boot loader should have
taken care about such things, it's now always the case in
practice.
> In the former case, this code and related bindings wouldn't be influenced
> by the pinmux API at all (and indeed arguably never should be, since DT
> is supposed to be oriented purely at HW, and not influenced by driver
> design). This approach might make the pinmux API mostly relevant only
> for drivers that actively change between configurations at run-time, and
> not for drivers that don't need dynamic muxing.
Platforms that do not need dynamic muxing should be using it
if they need to configure default states of the pins at boot I think.
> However, in the latter case, this code should be part of the pinmux core,
> and my patches to Tegra's pinmux driver dropped. It'd be difficult to
> define a pinmux binding that wasn't influenced by the pinmux API's needs
> in this case.
Well that depends on what you want to do.
The patch subject seems to suggest that all SoCs should use this,
not just the Tegra driver. If it had the subject "of: add a tegra
pinmux helper" and functions named of_tegra_pinmux_parse() and
so on I wouldn't have any objections whatsoever.
If however you want to create a DT binding that should be used by
anyone (as indicated by the subject) it must use abstract concepts of
some kind and then I have opinions on how to name things and
some idea that I'd like them to correspond to what the pin control
subsystem will call things.
For example not call things dealing with biasing as part of
something called "pinmux", since in the pin controller
subsystem I'm envisioning I'm striving to separation of
concerns to the point where biasing and muxing are
completely orthogonal concepts, though they might be
using the same abstract concept of pin groups...
I don't know if I'm getting across properly, I'm trying
my best.
Thanks,
Linus Walleij
^ permalink raw reply [flat|nested] 69+ messages in thread
* Re: [PATCH v3 10/13] of: add a generic pinmux helper
@ 2011-09-01 11:30 ` Linus Walleij
0 siblings, 0 replies; 69+ messages in thread
From: Linus Walleij @ 2011-09-01 11:30 UTC (permalink / raw)
To: Stephen Warren
Cc: Grant Likely, Colin Cross, Erik Gilling, Olof Johansson,
Russell King, Arnd Bergmann, devicetree-discuss, linux-tegra,
linux-arm-kernel, linux-kernel, Belisko Marek, Jamie Iles,
Shawn Guo, Sergei Shtylyov
On Mon, Aug 29, 2011 at 11:46 PM, Stephen Warren <swarren@nvidia.com> wrote:
>> > +EXPORT_SYMBOL_GPL(of_pinmux_parse);
>>
>> Renamed of_pinctrl_parse I'm happier with it.
>
> Well, it's not just that; the struct contains the function field to
> select for each pingroup, so it's not just pinctrl either.
OK as of my thinking in the v6 pin control patch set groups
are an abstract concept that is part of pin control and pin
definitions (does not need to be used for muxing, could be
anything you want to do with pins) so that sorts it out I guess?
So in line with that terminology I think this should be
named pinctrl.
>> The current pinctrl patch set would probably want an unsigned
>> "position" attribute too. (If we should build on that.)
>
> This does beg the question I asked previously:
>
> The intent of this patch was to provide a way for devicetree to set the
> complete initial state of the pinmux, in a SoC-specific fashion, without
> interaction with the pinmux API.
>
> However, I'm guessing you see the pinmux driver as not touching HW at
> boot at all, and never programming anything except in response to a
> driver calling pinmux_get()/pinmux_enable()?
Since the pin control driver is (supposedly) the only driver that knows
about the register range dealing with muxing, all kind of fiddling
with these registers that are *necessary* on boot (e.g. to get the
thing up in a known state) need to be in the pincontrol driver.
So it may touch hardware on boot, i.e. write default values,
even though one may argue that the boot loader should have
taken care about such things, it's now always the case in
practice.
> In the former case, this code and related bindings wouldn't be influenced
> by the pinmux API at all (and indeed arguably never should be, since DT
> is supposed to be oriented purely at HW, and not influenced by driver
> design). This approach might make the pinmux API mostly relevant only
> for drivers that actively change between configurations at run-time, and
> not for drivers that don't need dynamic muxing.
Platforms that do not need dynamic muxing should be using it
if they need to configure default states of the pins at boot I think.
> However, in the latter case, this code should be part of the pinmux core,
> and my patches to Tegra's pinmux driver dropped. It'd be difficult to
> define a pinmux binding that wasn't influenced by the pinmux API's needs
> in this case.
Well that depends on what you want to do.
The patch subject seems to suggest that all SoCs should use this,
not just the Tegra driver. If it had the subject "of: add a tegra
pinmux helper" and functions named of_tegra_pinmux_parse() and
so on I wouldn't have any objections whatsoever.
If however you want to create a DT binding that should be used by
anyone (as indicated by the subject) it must use abstract concepts of
some kind and then I have opinions on how to name things and
some idea that I'd like them to correspond to what the pin control
subsystem will call things.
For example not call things dealing with biasing as part of
something called "pinmux", since in the pin controller
subsystem I'm envisioning I'm striving to separation of
concerns to the point where biasing and muxing are
completely orthogonal concepts, though they might be
using the same abstract concept of pin groups...
I don't know if I'm getting across properly, I'm trying
my best.
Thanks,
Linus Walleij
^ permalink raw reply [flat|nested] 69+ messages in thread
* [PATCH v3 11/13] of: add property iteration helpers
2011-08-25 23:43 ` Stephen Warren
(?)
@ 2011-08-25 23:43 ` Stephen Warren
-1 siblings, 0 replies; 69+ messages in thread
From: Stephen Warren @ 2011-08-25 23:43 UTC (permalink / raw)
To: Grant Likely, Colin Cross, Erik Gilling, Olof Johansson
Cc: Russell King, Sergei Shtylyov, Belisko Marek,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-tegra-u79uwXL29TY76Z2rM5mHXA, Linus Walleij,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
This patch adds macros for_each_u32_property_value and
for_each_string_property_value, which iterate over an array of values
within a device-tree property. Usage is for example:
struct of_iter_string_prop iter;
for_each_string_property_value(iter, np, "pins")
printk("Got value %s\n", iter.value);
Signed-off-by: Stephen Warren <swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
include/linux/of_iter_prop.h | 135 ++++++++++++++++++++++++++++++++++++++++++
1 files changed, 135 insertions(+), 0 deletions(-)
create mode 100644 include/linux/of_iter_prop.h
diff --git a/include/linux/of_iter_prop.h b/include/linux/of_iter_prop.h
new file mode 100644
index 0000000..c7fb2bf
--- /dev/null
+++ b/include/linux/of_iter_prop.h
@@ -0,0 +1,135 @@
+/*
+ * Copyright (c) 2011 NVIDIA Inc.
+ *
+ * Iterate over properties that store arrays.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __OF_ITER_PROP_H__
+#define __OF_ITER_PROP_H__
+
+#include <linux/of.h>
+
+#ifdef CONFIG_OF
+struct of_iter_u32_prop {
+ const struct property *prop;
+ int len;
+ const __be32 *pvalue;
+ u32 value;
+};
+
+static inline void of_iter_u32_next(struct of_iter_u32_prop *iter)
+{
+ if (iter->len < 0)
+ return;
+
+ iter->value = be32_to_cpup(iter->pvalue++);
+ iter->len--;
+}
+
+static inline void of_iter_u32_init(struct of_iter_u32_prop *iter,
+ const struct device_node *np,
+ const char *name)
+{
+ iter->prop = of_find_property(np, name, &iter->len);
+ if (!iter->prop) {
+ iter->len = -1;
+ return;
+ }
+
+ iter->pvalue = iter->prop->value;
+ if (!iter->pvalue) {
+ iter->len = -1;
+ return;
+ }
+
+ iter->len /= sizeof(*iter->pvalue);
+
+ of_iter_u32_next(iter);
+}
+
+static inline bool of_iter_u32_test(struct of_iter_u32_prop *iter)
+{
+ return iter->len >= 0;
+}
+
+#define for_each_u32_property_value(iter, np, prop_name) \
+ for (of_iter_u32_init(&iter, np, prop_name); \
+ of_iter_u32_test(&iter); \
+ of_iter_u32_next(&iter))
+
+struct of_iter_string_prop {
+ const struct property *prop;
+ int len;
+ const char *value;
+ const char *after;
+};
+
+static inline void of_iter_string_init(struct of_iter_string_prop *iter,
+ const struct device_node *np,
+ const char *name)
+{
+ iter->prop = of_find_property(np, name, &iter->len);
+ if (!iter->prop) {
+ iter->value = NULL;
+ return;
+ }
+
+ iter->value = iter->prop->value;
+ if (!iter->value)
+ return;
+
+ iter->after = iter->value + iter->len;
+}
+
+static inline bool of_iter_string_test(struct of_iter_string_prop *iter)
+{
+ if (!iter->value)
+ return false;
+
+ return iter->value < iter->after;
+}
+
+static inline void of_iter_string_next(struct of_iter_string_prop *iter)
+{
+ int len;
+
+ if (!iter->value)
+ return;
+
+ len = strnlen(iter->value, iter->len);
+ iter->len -= len;
+ iter->value += len + 1;
+}
+
+#define for_each_string_property_value(iter, np, prop_name) \
+ for (of_iter_string_init(&iter, np, prop_name); \
+ of_iter_string_test(&iter); \
+ of_iter_string_next(&iter))
+
+#else
+struct of_iter_u32_prop {
+ u32 value;
+};
+
+#define for_each_u32_property_value(iter, np, prop_name) \
+ while (0)
+
+struct of_iter_string_prop {
+ const char *value;
+};
+
+#define for_each_string_property_value(iter, np, prop_name) \
+ while (0)
+
+#endif /* CONFIG_OF */
+
+#endif /* __OF_ITER_PROP_H__ */
--
1.7.0.4
^ permalink raw reply related [flat|nested] 69+ messages in thread* [PATCH v3 11/13] of: add property iteration helpers
@ 2011-08-25 23:43 ` Stephen Warren
0 siblings, 0 replies; 69+ messages in thread
From: Stephen Warren @ 2011-08-25 23:43 UTC (permalink / raw)
To: linux-arm-kernel
This patch adds macros for_each_u32_property_value and
for_each_string_property_value, which iterate over an array of values
within a device-tree property. Usage is for example:
struct of_iter_string_prop iter;
for_each_string_property_value(iter, np, "pins")
printk("Got value %s\n", iter.value);
Signed-off-by: Stephen Warren <swarren@nvidia.com>
---
include/linux/of_iter_prop.h | 135 ++++++++++++++++++++++++++++++++++++++++++
1 files changed, 135 insertions(+), 0 deletions(-)
create mode 100644 include/linux/of_iter_prop.h
diff --git a/include/linux/of_iter_prop.h b/include/linux/of_iter_prop.h
new file mode 100644
index 0000000..c7fb2bf
--- /dev/null
+++ b/include/linux/of_iter_prop.h
@@ -0,0 +1,135 @@
+/*
+ * Copyright (c) 2011 NVIDIA Inc.
+ *
+ * Iterate over properties that store arrays.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __OF_ITER_PROP_H__
+#define __OF_ITER_PROP_H__
+
+#include <linux/of.h>
+
+#ifdef CONFIG_OF
+struct of_iter_u32_prop {
+ const struct property *prop;
+ int len;
+ const __be32 *pvalue;
+ u32 value;
+};
+
+static inline void of_iter_u32_next(struct of_iter_u32_prop *iter)
+{
+ if (iter->len < 0)
+ return;
+
+ iter->value = be32_to_cpup(iter->pvalue++);
+ iter->len--;
+}
+
+static inline void of_iter_u32_init(struct of_iter_u32_prop *iter,
+ const struct device_node *np,
+ const char *name)
+{
+ iter->prop = of_find_property(np, name, &iter->len);
+ if (!iter->prop) {
+ iter->len = -1;
+ return;
+ }
+
+ iter->pvalue = iter->prop->value;
+ if (!iter->pvalue) {
+ iter->len = -1;
+ return;
+ }
+
+ iter->len /= sizeof(*iter->pvalue);
+
+ of_iter_u32_next(iter);
+}
+
+static inline bool of_iter_u32_test(struct of_iter_u32_prop *iter)
+{
+ return iter->len >= 0;
+}
+
+#define for_each_u32_property_value(iter, np, prop_name) \
+ for (of_iter_u32_init(&iter, np, prop_name); \
+ of_iter_u32_test(&iter); \
+ of_iter_u32_next(&iter))
+
+struct of_iter_string_prop {
+ const struct property *prop;
+ int len;
+ const char *value;
+ const char *after;
+};
+
+static inline void of_iter_string_init(struct of_iter_string_prop *iter,
+ const struct device_node *np,
+ const char *name)
+{
+ iter->prop = of_find_property(np, name, &iter->len);
+ if (!iter->prop) {
+ iter->value = NULL;
+ return;
+ }
+
+ iter->value = iter->prop->value;
+ if (!iter->value)
+ return;
+
+ iter->after = iter->value + iter->len;
+}
+
+static inline bool of_iter_string_test(struct of_iter_string_prop *iter)
+{
+ if (!iter->value)
+ return false;
+
+ return iter->value < iter->after;
+}
+
+static inline void of_iter_string_next(struct of_iter_string_prop *iter)
+{
+ int len;
+
+ if (!iter->value)
+ return;
+
+ len = strnlen(iter->value, iter->len);
+ iter->len -= len;
+ iter->value += len + 1;
+}
+
+#define for_each_string_property_value(iter, np, prop_name) \
+ for (of_iter_string_init(&iter, np, prop_name); \
+ of_iter_string_test(&iter); \
+ of_iter_string_next(&iter))
+
+#else
+struct of_iter_u32_prop {
+ u32 value;
+};
+
+#define for_each_u32_property_value(iter, np, prop_name) \
+ while (0)
+
+struct of_iter_string_prop {
+ const char *value;
+};
+
+#define for_each_string_property_value(iter, np, prop_name) \
+ while (0)
+
+#endif /* CONFIG_OF */
+
+#endif /* __OF_ITER_PROP_H__ */
--
1.7.0.4
^ permalink raw reply related [flat|nested] 69+ messages in thread* [PATCH v3 11/13] of: add property iteration helpers
@ 2011-08-25 23:43 ` Stephen Warren
0 siblings, 0 replies; 69+ messages in thread
From: Stephen Warren @ 2011-08-25 23:43 UTC (permalink / raw)
To: Grant Likely, Colin Cross, Erik Gilling, Olof Johansson
Cc: Russell King, Arnd Bergmann, devicetree-discuss, linux-tegra,
linux-arm-kernel, linux-kernel, Belisko Marek, Jamie Iles,
Shawn Guo, Sergei Shtylyov, Linus Walleij, Stephen Warren
This patch adds macros for_each_u32_property_value and
for_each_string_property_value, which iterate over an array of values
within a device-tree property. Usage is for example:
struct of_iter_string_prop iter;
for_each_string_property_value(iter, np, "pins")
printk("Got value %s\n", iter.value);
Signed-off-by: Stephen Warren <swarren@nvidia.com>
---
include/linux/of_iter_prop.h | 135 ++++++++++++++++++++++++++++++++++++++++++
1 files changed, 135 insertions(+), 0 deletions(-)
create mode 100644 include/linux/of_iter_prop.h
diff --git a/include/linux/of_iter_prop.h b/include/linux/of_iter_prop.h
new file mode 100644
index 0000000..c7fb2bf
--- /dev/null
+++ b/include/linux/of_iter_prop.h
@@ -0,0 +1,135 @@
+/*
+ * Copyright (c) 2011 NVIDIA Inc.
+ *
+ * Iterate over properties that store arrays.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __OF_ITER_PROP_H__
+#define __OF_ITER_PROP_H__
+
+#include <linux/of.h>
+
+#ifdef CONFIG_OF
+struct of_iter_u32_prop {
+ const struct property *prop;
+ int len;
+ const __be32 *pvalue;
+ u32 value;
+};
+
+static inline void of_iter_u32_next(struct of_iter_u32_prop *iter)
+{
+ if (iter->len < 0)
+ return;
+
+ iter->value = be32_to_cpup(iter->pvalue++);
+ iter->len--;
+}
+
+static inline void of_iter_u32_init(struct of_iter_u32_prop *iter,
+ const struct device_node *np,
+ const char *name)
+{
+ iter->prop = of_find_property(np, name, &iter->len);
+ if (!iter->prop) {
+ iter->len = -1;
+ return;
+ }
+
+ iter->pvalue = iter->prop->value;
+ if (!iter->pvalue) {
+ iter->len = -1;
+ return;
+ }
+
+ iter->len /= sizeof(*iter->pvalue);
+
+ of_iter_u32_next(iter);
+}
+
+static inline bool of_iter_u32_test(struct of_iter_u32_prop *iter)
+{
+ return iter->len >= 0;
+}
+
+#define for_each_u32_property_value(iter, np, prop_name) \
+ for (of_iter_u32_init(&iter, np, prop_name); \
+ of_iter_u32_test(&iter); \
+ of_iter_u32_next(&iter))
+
+struct of_iter_string_prop {
+ const struct property *prop;
+ int len;
+ const char *value;
+ const char *after;
+};
+
+static inline void of_iter_string_init(struct of_iter_string_prop *iter,
+ const struct device_node *np,
+ const char *name)
+{
+ iter->prop = of_find_property(np, name, &iter->len);
+ if (!iter->prop) {
+ iter->value = NULL;
+ return;
+ }
+
+ iter->value = iter->prop->value;
+ if (!iter->value)
+ return;
+
+ iter->after = iter->value + iter->len;
+}
+
+static inline bool of_iter_string_test(struct of_iter_string_prop *iter)
+{
+ if (!iter->value)
+ return false;
+
+ return iter->value < iter->after;
+}
+
+static inline void of_iter_string_next(struct of_iter_string_prop *iter)
+{
+ int len;
+
+ if (!iter->value)
+ return;
+
+ len = strnlen(iter->value, iter->len);
+ iter->len -= len;
+ iter->value += len + 1;
+}
+
+#define for_each_string_property_value(iter, np, prop_name) \
+ for (of_iter_string_init(&iter, np, prop_name); \
+ of_iter_string_test(&iter); \
+ of_iter_string_next(&iter))
+
+#else
+struct of_iter_u32_prop {
+ u32 value;
+};
+
+#define for_each_u32_property_value(iter, np, prop_name) \
+ while (0)
+
+struct of_iter_string_prop {
+ const char *value;
+};
+
+#define for_each_string_property_value(iter, np, prop_name) \
+ while (0)
+
+#endif /* CONFIG_OF */
+
+#endif /* __OF_ITER_PROP_H__ */
--
1.7.0.4
^ permalink raw reply related [flat|nested] 69+ messages in thread[parent not found: <1314315824-9687-12-git-send-email-swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>]
* Re: [PATCH v3 11/13] of: add property iteration helpers
2011-08-25 23:43 ` Stephen Warren
(?)
@ 2011-08-26 9:26 ` Jamie Iles
-1 siblings, 0 replies; 69+ messages in thread
From: Jamie Iles @ 2011-08-26 9:26 UTC (permalink / raw)
To: Stephen Warren
Cc: Grant Likely, Colin Cross, Erik Gilling, Olof Johansson,
Russell King, Arnd Bergmann,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
linux-tegra-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Belisko Marek, Jamie Iles,
Shawn Guo, Sergei Shtylyov, Linus Walleij
On Thu, Aug 25, 2011 at 05:43:42PM -0600, Stephen Warren wrote:
> This patch adds macros for_each_u32_property_value and
> for_each_string_property_value, which iterate over an array of values
> within a device-tree property. Usage is for example:
>
> struct of_iter_string_prop iter;
> for_each_string_property_value(iter, np, "pins")
> printk("Got value %s\n", iter.value);
>
> Signed-off-by: Stephen Warren <swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
Nicely implemented! For the !CONFIG_OF case, I *think* that
of_iter_u32_prop and of_iter_string_prop can be empty struct's, but I
wouldn't want to bet money on that!
Reviewed-by: Jamie Iles <jamie-wmLquQDDieKakBO8gow8eQ@public.gmane.org>
^ permalink raw reply [flat|nested] 69+ messages in thread* [PATCH v3 11/13] of: add property iteration helpers
@ 2011-08-26 9:26 ` Jamie Iles
0 siblings, 0 replies; 69+ messages in thread
From: Jamie Iles @ 2011-08-26 9:26 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Aug 25, 2011 at 05:43:42PM -0600, Stephen Warren wrote:
> This patch adds macros for_each_u32_property_value and
> for_each_string_property_value, which iterate over an array of values
> within a device-tree property. Usage is for example:
>
> struct of_iter_string_prop iter;
> for_each_string_property_value(iter, np, "pins")
> printk("Got value %s\n", iter.value);
>
> Signed-off-by: Stephen Warren <swarren@nvidia.com>
Nicely implemented! For the !CONFIG_OF case, I *think* that
of_iter_u32_prop and of_iter_string_prop can be empty struct's, but I
wouldn't want to bet money on that!
Reviewed-by: Jamie Iles <jamie@jamieiles.com>
^ permalink raw reply [flat|nested] 69+ messages in thread* Re: [PATCH v3 11/13] of: add property iteration helpers
@ 2011-08-26 9:26 ` Jamie Iles
0 siblings, 0 replies; 69+ messages in thread
From: Jamie Iles @ 2011-08-26 9:26 UTC (permalink / raw)
To: Stephen Warren
Cc: Grant Likely, Colin Cross, Erik Gilling, Olof Johansson,
Russell King, Arnd Bergmann, devicetree-discuss, linux-tegra,
linux-arm-kernel, linux-kernel, Belisko Marek, Jamie Iles,
Shawn Guo, Sergei Shtylyov, Linus Walleij
On Thu, Aug 25, 2011 at 05:43:42PM -0600, Stephen Warren wrote:
> This patch adds macros for_each_u32_property_value and
> for_each_string_property_value, which iterate over an array of values
> within a device-tree property. Usage is for example:
>
> struct of_iter_string_prop iter;
> for_each_string_property_value(iter, np, "pins")
> printk("Got value %s\n", iter.value);
>
> Signed-off-by: Stephen Warren <swarren@nvidia.com>
Nicely implemented! For the !CONFIG_OF case, I *think* that
of_iter_u32_prop and of_iter_string_prop can be empty struct's, but I
wouldn't want to bet money on that!
Reviewed-by: Jamie Iles <jamie@jamieiles.com>
^ permalink raw reply [flat|nested] 69+ messages in thread[parent not found: <20110826092632.GB3926-apL1N+EY0C9YtYNIL7UdTEEOCMrvLtNR@public.gmane.org>]
* RE: [PATCH v3 11/13] of: add property iteration helpers
2011-08-26 9:26 ` Jamie Iles
(?)
@ 2011-08-26 15:59 ` Stephen Warren
-1 siblings, 0 replies; 69+ messages in thread
From: Stephen Warren @ 2011-08-26 15:59 UTC (permalink / raw)
To: Jamie Iles
Cc: Grant Likely, Colin Cross, Erik Gilling, Olof Johansson,
Russell King, Arnd Bergmann,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
linux-tegra-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Belisko Marek, Shawn Guo,
Sergei Shtylyov, Linus Walleij
Jamie Iles wrote at Friday, August 26, 2011 3:27 AM:
> On Thu, Aug 25, 2011 at 05:43:42PM -0600, Stephen Warren wrote:
> > This patch adds macros for_each_u32_property_value and
> > for_each_string_property_value, which iterate over an array of values
> > within a device-tree property. Usage is for example:
> >
> > struct of_iter_string_prop iter;
> > for_each_string_property_value(iter, np, "pins")
> > printk("Got value %s\n", iter.value);
> >
> > Signed-off-by: Stephen Warren <swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
>
> Nicely implemented!
Thanks!
> For the !CONFIG_OF case, I *think* that
> of_iter_u32_prop and of_iter_string_prop can be empty struct's, but I
> wouldn't want to bet money on that!
Empty structs themselves certainly did compile OK, but the code that
uses these macros references iter.value directly, and isn't under #ifdef
CONFIG_OF, so that field has to exist.
I suppose an alternative would be to add an accessor function:
struct of_iter_string_prop iter;
for_each_string_property_value(iter, np, "pins")
printk("Got value %s\n", of_iter_string_value(iter));
which would return NULL/"" when !CONFIG_OF, and hence allow iter.value
to be removed too. Do you think that's a good approach? It'd be easy to
implement.
--
nvpublic
^ permalink raw reply [flat|nested] 69+ messages in thread* [PATCH v3 11/13] of: add property iteration helpers
@ 2011-08-26 15:59 ` Stephen Warren
0 siblings, 0 replies; 69+ messages in thread
From: Stephen Warren @ 2011-08-26 15:59 UTC (permalink / raw)
To: linux-arm-kernel
Jamie Iles wrote at Friday, August 26, 2011 3:27 AM:
> On Thu, Aug 25, 2011 at 05:43:42PM -0600, Stephen Warren wrote:
> > This patch adds macros for_each_u32_property_value and
> > for_each_string_property_value, which iterate over an array of values
> > within a device-tree property. Usage is for example:
> >
> > struct of_iter_string_prop iter;
> > for_each_string_property_value(iter, np, "pins")
> > printk("Got value %s\n", iter.value);
> >
> > Signed-off-by: Stephen Warren <swarren@nvidia.com>
>
> Nicely implemented!
Thanks!
> For the !CONFIG_OF case, I *think* that
> of_iter_u32_prop and of_iter_string_prop can be empty struct's, but I
> wouldn't want to bet money on that!
Empty structs themselves certainly did compile OK, but the code that
uses these macros references iter.value directly, and isn't under #ifdef
CONFIG_OF, so that field has to exist.
I suppose an alternative would be to add an accessor function:
struct of_iter_string_prop iter;
for_each_string_property_value(iter, np, "pins")
printk("Got value %s\n", of_iter_string_value(iter));
which would return NULL/"" when !CONFIG_OF, and hence allow iter.value
to be removed too. Do you think that's a good approach? It'd be easy to
implement.
--
nvpublic
^ permalink raw reply [flat|nested] 69+ messages in thread* RE: [PATCH v3 11/13] of: add property iteration helpers
@ 2011-08-26 15:59 ` Stephen Warren
0 siblings, 0 replies; 69+ messages in thread
From: Stephen Warren @ 2011-08-26 15:59 UTC (permalink / raw)
To: Jamie Iles
Cc: Grant Likely, Colin Cross, Erik Gilling, Olof Johansson,
Russell King, Arnd Bergmann, devicetree-discuss, linux-tegra,
linux-arm-kernel, linux-kernel, Belisko Marek, Shawn Guo,
Sergei Shtylyov, Linus Walleij
Jamie Iles wrote at Friday, August 26, 2011 3:27 AM:
> On Thu, Aug 25, 2011 at 05:43:42PM -0600, Stephen Warren wrote:
> > This patch adds macros for_each_u32_property_value and
> > for_each_string_property_value, which iterate over an array of values
> > within a device-tree property. Usage is for example:
> >
> > struct of_iter_string_prop iter;
> > for_each_string_property_value(iter, np, "pins")
> > printk("Got value %s\n", iter.value);
> >
> > Signed-off-by: Stephen Warren <swarren@nvidia.com>
>
> Nicely implemented!
Thanks!
> For the !CONFIG_OF case, I *think* that
> of_iter_u32_prop and of_iter_string_prop can be empty struct's, but I
> wouldn't want to bet money on that!
Empty structs themselves certainly did compile OK, but the code that
uses these macros references iter.value directly, and isn't under #ifdef
CONFIG_OF, so that field has to exist.
I suppose an alternative would be to add an accessor function:
struct of_iter_string_prop iter;
for_each_string_property_value(iter, np, "pins")
printk("Got value %s\n", of_iter_string_value(iter));
which would return NULL/"" when !CONFIG_OF, and hence allow iter.value
to be removed too. Do you think that's a good approach? It'd be easy to
implement.
--
nvpublic
^ permalink raw reply [flat|nested] 69+ messages in thread[parent not found: <74CDBE0F657A3D45AFBB94109FB122FF04B24A40C8-C7FfzLzN0UxDw2glCA4ptUEOCMrvLtNR@public.gmane.org>]
* Re: [PATCH v3 11/13] of: add property iteration helpers
2011-08-26 15:59 ` Stephen Warren
(?)
@ 2011-08-26 16:16 ` Jamie Iles
-1 siblings, 0 replies; 69+ messages in thread
From: Jamie Iles @ 2011-08-26 16:16 UTC (permalink / raw)
To: Stephen Warren
Cc: Jamie Iles, Grant Likely, Colin Cross, Erik Gilling,
Olof Johansson, Russell King, Arnd Bergmann,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
linux-tegra-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Belisko Marek, Shawn Guo,
Sergei Shtylyov, Linus Walleij
On Fri, Aug 26, 2011 at 08:59:44AM -0700, Stephen Warren wrote:
> Jamie Iles wrote at Friday, August 26, 2011 3:27 AM:
> > For the !CONFIG_OF case, I *think* that
> > of_iter_u32_prop and of_iter_string_prop can be empty struct's, but I
> > wouldn't want to bet money on that!
>
> Empty structs themselves certainly did compile OK, but the code that
> uses these macros references iter.value directly, and isn't under #ifdef
> CONFIG_OF, so that field has to exist.
>
> I suppose an alternative would be to add an accessor function:
>
> struct of_iter_string_prop iter;
> for_each_string_property_value(iter, np, "pins")
> printk("Got value %s\n", of_iter_string_value(iter));
>
> which would return NULL/"" when !CONFIG_OF, and hence allow iter.value
> to be removed too. Do you think that's a good approach? It'd be easy to
> implement.
I think I prefer what you have now rather than a separate accessor, but
I'm happy either way!
Jamie
^ permalink raw reply [flat|nested] 69+ messages in thread* [PATCH v3 11/13] of: add property iteration helpers
@ 2011-08-26 16:16 ` Jamie Iles
0 siblings, 0 replies; 69+ messages in thread
From: Jamie Iles @ 2011-08-26 16:16 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, Aug 26, 2011 at 08:59:44AM -0700, Stephen Warren wrote:
> Jamie Iles wrote at Friday, August 26, 2011 3:27 AM:
> > For the !CONFIG_OF case, I *think* that
> > of_iter_u32_prop and of_iter_string_prop can be empty struct's, but I
> > wouldn't want to bet money on that!
>
> Empty structs themselves certainly did compile OK, but the code that
> uses these macros references iter.value directly, and isn't under #ifdef
> CONFIG_OF, so that field has to exist.
>
> I suppose an alternative would be to add an accessor function:
>
> struct of_iter_string_prop iter;
> for_each_string_property_value(iter, np, "pins")
> printk("Got value %s\n", of_iter_string_value(iter));
>
> which would return NULL/"" when !CONFIG_OF, and hence allow iter.value
> to be removed too. Do you think that's a good approach? It'd be easy to
> implement.
I think I prefer what you have now rather than a separate accessor, but
I'm happy either way!
Jamie
^ permalink raw reply [flat|nested] 69+ messages in thread* Re: [PATCH v3 11/13] of: add property iteration helpers
@ 2011-08-26 16:16 ` Jamie Iles
0 siblings, 0 replies; 69+ messages in thread
From: Jamie Iles @ 2011-08-26 16:16 UTC (permalink / raw)
To: Stephen Warren
Cc: Jamie Iles, Grant Likely, Colin Cross, Erik Gilling,
Olof Johansson, Russell King, Arnd Bergmann, devicetree-discuss,
linux-tegra, linux-arm-kernel, linux-kernel, Belisko Marek,
Shawn Guo, Sergei Shtylyov, Linus Walleij
On Fri, Aug 26, 2011 at 08:59:44AM -0700, Stephen Warren wrote:
> Jamie Iles wrote at Friday, August 26, 2011 3:27 AM:
> > For the !CONFIG_OF case, I *think* that
> > of_iter_u32_prop and of_iter_string_prop can be empty struct's, but I
> > wouldn't want to bet money on that!
>
> Empty structs themselves certainly did compile OK, but the code that
> uses these macros references iter.value directly, and isn't under #ifdef
> CONFIG_OF, so that field has to exist.
>
> I suppose an alternative would be to add an accessor function:
>
> struct of_iter_string_prop iter;
> for_each_string_property_value(iter, np, "pins")
> printk("Got value %s\n", of_iter_string_value(iter));
>
> which would return NULL/"" when !CONFIG_OF, and hence allow iter.value
> to be removed too. Do you think that's a good approach? It'd be easy to
> implement.
I think I prefer what you have now rather than a separate accessor, but
I'm happy either way!
Jamie
^ permalink raw reply [flat|nested] 69+ messages in thread
* [PATCH v3 12/13] arm/tegra: Add device tree support to pinmux driver
2011-08-25 23:43 ` Stephen Warren
(?)
@ 2011-08-25 23:43 ` Stephen Warren
-1 siblings, 0 replies; 69+ messages in thread
From: Stephen Warren @ 2011-08-25 23:43 UTC (permalink / raw)
To: Grant Likely, Colin Cross, Erik Gilling, Olof Johansson
Cc: Russell King, Arnd Bergmann,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
linux-tegra-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Belisko Marek, Jamie Iles,
Shawn Guo, Sergei Shtylyov, Linus Walleij, Stephen Warren
Signed-off-by: Stephen Warren <swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
[j.iles: converted to generic of_pinmux_parse()]
Signed-off-by: Jamie Iles <jamie-wmLquQDDieKakBO8gow8eQ@public.gmane.org>
[swarren: Added support for pins property]
Signed-off-by: Stephen Warren <swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
arch/arm/mach-tegra/pinmux.c | 260 ++++++++++++++++++++++++++++++++++++++++++
1 files changed, 260 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-tegra/pinmux.c b/arch/arm/mach-tegra/pinmux.c
index ed316f9..7526f7c 100644
--- a/arch/arm/mach-tegra/pinmux.c
+++ b/arch/arm/mach-tegra/pinmux.c
@@ -20,6 +20,9 @@
#include <linux/errno.h>
#include <linux/spinlock.h>
#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_iter_prop.h>
+#include <linux/of_pinmux.h>
#include <linux/platform_device.h>
#include <mach/iomap.h>
@@ -124,6 +127,19 @@ static const char *pingroup_name(enum tegra_pingroup pg)
return pingroups[pg].name;
}
+static int pingroup_enum(const char *name, enum tegra_pingroup *pg_out)
+{
+ int pg;
+
+ for (pg = 0; pg < TEGRA_MAX_PINGROUP; pg++)
+ if (!strcasecmp(name, tegra_soc_pingroups[pg].name)) {
+ *pg_out = pg;
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
static const char *func_name(enum tegra_mux_func func)
{
if (func == TEGRA_MUX_RSVD1)
@@ -147,6 +163,39 @@ static const char *func_name(enum tegra_mux_func func)
return tegra_mux_names[func];
}
+static int func_enum(const char *name, enum tegra_mux_func *func_out)
+{
+ int func;
+
+ if (!strcasecmp(name, "RSVD1")) {
+ *func_out = TEGRA_MUX_RSVD1;
+ return 0;
+ }
+ if (!strcasecmp(name, "RSVD2")) {
+ *func_out = TEGRA_MUX_RSVD2;
+ return 0;
+ }
+ if (!strcasecmp(name, "RSVD3")) {
+ *func_out = TEGRA_MUX_RSVD3;
+ return 0;
+ }
+ if (!strcasecmp(name, "RSVD4")) {
+ *func_out = TEGRA_MUX_RSVD4;
+ return 0;
+ }
+ if (!strcasecmp(name, "NONE")) {
+ *func_out = TEGRA_MUX_NONE;
+ return 0;
+ }
+
+ for (func = 0; func < TEGRA_MAX_MUX; func++)
+ if (!strcasecmp(name, tegra_mux_names[func])) {
+ *func_out = func;
+ return 0;
+ }
+
+ return -EINVAL;
+}
static const char *tri_name(unsigned long val)
{
@@ -329,6 +378,20 @@ static const char *drive_pinmux_name(enum tegra_drive_pingroup pg)
return drive_pingroups[pg].name;
}
+static int drive_pinmux_enum(const char *name,
+ enum tegra_drive_pingroup *pg_out)
+{
+ int pg;
+
+ for (pg = 0; pg < TEGRA_MAX_DRIVE_PINGROUP; pg++)
+ if (!strcasecmp(name, drive_pingroups[pg].name)) {
+ *pg_out = pg;
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
static const char *enable_name(unsigned long val)
{
return val ? "ENABLE" : "DISABLE";
@@ -666,15 +729,212 @@ void tegra_pinmux_config_pullupdown_table(const struct tegra_pingroup_config *co
}
}
+struct tegra_pinmux_configs {
+ struct tegra_pingroup_config tcfg;
+ struct of_pinmux_cfg ocfg;
+};
+
+static int __init tegra_pinmux_dt_parse(const struct of_pinmux_ctrl *ctrl,
+ struct of_pinmux_cfg *cfg)
+{
+ struct tegra_pinmux_configs *cfgs =
+ container_of(cfg, struct tegra_pinmux_configs, ocfg);
+ struct tegra_pingroup_config *tcfg = &cfgs->tcfg;
+ struct of_pinmux_cfg *ocfg = &cfgs->ocfg;
+ int ret;
+
+ ret = func_enum(ocfg->function, &tcfg->func);
+ if (ret < 0) {
+ dev_err(ctrl->dev, "invalid function %s in node %s\n",
+ ocfg->function, ocfg->node->name);
+ return ret;
+ }
+
+ if (ocfg->flags & OF_PINMUX_PULL_UP)
+ tcfg->pupd = TEGRA_PUPD_PULL_UP;
+ else if (ocfg->flags & OF_PINMUX_PULL_DOWN)
+ tcfg->pupd = TEGRA_PUPD_PULL_DOWN;
+ else
+ tcfg->pupd = TEGRA_PUPD_NORMAL;
+
+ tcfg->tristate = (ocfg->flags & OF_PINMUX_TRISTATE) ?
+ TEGRA_TRI_TRISTATE : TEGRA_TRI_NORMAL;
+
+ return 0;
+}
+
+static int __init tegra_pinmux_dt_configure(const struct of_pinmux_ctrl *ctrl,
+ const struct of_pinmux_cfg *cfg)
+{
+ struct tegra_pinmux_configs *cfgs =
+ container_of(cfg, struct tegra_pinmux_configs, ocfg);
+ struct tegra_pingroup_config *tcfg = &cfgs->tcfg;
+ struct of_pinmux_cfg *ocfg = &cfgs->ocfg;
+ int ret;
+
+ ret = pingroup_enum(ocfg->pin, &tcfg->pingroup);
+ if (ret < 0) {
+ dev_err(ctrl->dev, "invalid pingroup %s in node %s\n",
+ ocfg->pin, ocfg->node->name);
+ return ret;
+ }
+
+ tegra_pinmux_config_pingroup(tcfg);
+
+ return 0;
+}
+
+static void __init tegra_pinmux_parse_mux_groups(
+ struct platform_device *pdev,
+ struct device_node *mux_node)
+{
+ struct of_pinmux_ctrl tegra_pinmux_ctrl = {
+ .dev = &pdev->dev,
+ .node = mux_node,
+ .parse = tegra_pinmux_dt_parse,
+ .configure = tegra_pinmux_dt_configure,
+ };
+ struct tegra_pinmux_configs cfgs;
+
+ if (of_pinmux_parse(&tegra_pinmux_ctrl, &cfgs.ocfg))
+ pr_err("failed to parse pinmux configuration\n");
+}
+
+static void __init tegra_pinmux_parse_drive_groups(
+ struct platform_device *pdev,
+ struct device_node *drive_node)
+{
+ struct device_node *np;
+
+ for_each_child_of_node(drive_node, np) {
+ enum tegra_hsm hsm;
+ enum tegra_schmitt schmitt;
+ enum tegra_drive drive;
+ enum tegra_pull_strength pull_down;
+ enum tegra_pull_strength pull_up;
+ enum tegra_slew slew_rising;
+ enum tegra_slew slew_falling;
+ int ret;
+ bool hadpins = 0;
+ struct of_iter_string_prop iter;
+
+ if (of_find_property(np, "nvidia,high-speed-mode", NULL))
+ hsm = TEGRA_HSM_ENABLE;
+ else
+ hsm = TEGRA_HSM_DISABLE;
+
+ if (of_find_property(np, "nvidia,schmitt", NULL))
+ schmitt = TEGRA_SCHMITT_ENABLE;
+ else
+ schmitt = TEGRA_SCHMITT_DISABLE;
+
+ ret = of_property_read_u32(np, "nvidia,drive-power", &drive);
+ if (ret < 0) {
+ dev_err(&pdev->dev,
+ "no nvidia,drive-power for node %s\n",
+ np->name);
+ continue;
+ }
+
+ ret = of_property_read_u32(np, "nvidia,pull-down-strength",
+ &pull_down);
+ if (ret < 0) {
+ dev_err(&pdev->dev,
+ "no nvidia,pull-down-strength for node %s\n",
+ np->name);
+ continue;
+ }
+
+ ret = of_property_read_u32(np, "nvidia,pull-up-strength",
+ &pull_up);
+ if (ret < 0) {
+ dev_err(&pdev->dev,
+ "no nvidia,pull-up-strength for node %s\n",
+ np->name);
+ continue;
+ }
+
+ ret = of_property_read_u32(np, "nvidia,slew-rate-rising",
+ &slew_rising);
+ if (ret < 0) {
+ dev_err(&pdev->dev,
+ "no nvidia,slew_rate-rising for node %s\n",
+ np->name);
+ continue;
+ }
+
+ ret = of_property_read_u32(np, "nvidia,slew-rate-falling",
+ &slew_rising);
+ if (ret < 0) {
+ dev_err(&pdev->dev,
+ "no nvidia,slew_rate-falling for node %s\n",
+ np->name);
+ continue;
+ }
+
+ for_each_string_property_value(iter, np, "pins") {
+ enum tegra_drive_pingroup pg;
+
+ hadpins = 1;
+
+ ret = drive_pinmux_enum(iter.value, &pg);
+ if (ret < 0) {
+ dev_err(&pdev->dev,
+ "invalid pingroup %s in node %s\n",
+ iter.value, np->name);
+ continue;
+ }
+
+ dev_dbg(&pdev->dev,
+ "configure pin %s hsm %d schmitt %d drive %d "
+ "pull_down %d pull_up %d slew_r %d slew_f %d\n",
+ iter.value,
+ hsm, schmitt, drive,
+ pull_down, pull_up,
+ slew_rising, slew_falling);
+
+ tegra_drive_pinmux_config_pingroup(pg, hsm, schmitt,
+ drive, pull_down,
+ pull_up,
+ slew_rising,
+ slew_falling);
+ }
+
+ if (!hadpins)
+ dev_warn(&pdev->dev, "no pins for node %s\n",
+ np->name);
+ }
+}
+
static int __init tegra_pinmux_probe(struct platform_device *pdev)
{
+ if (pdev->dev.of_node != NULL) {
+ struct device_node *node;
+
+ for_each_child_of_node(pdev->dev.of_node, node) {
+ if (!strcmp(node->name, "nvidia,mux-groups"))
+ tegra_pinmux_parse_mux_groups(pdev, node);
+ else if (!strcmp(node->name, "nvidia,drive-groups"))
+ tegra_pinmux_parse_drive_groups(pdev, node);
+ else
+ dev_err(&pdev->dev, "%s: Unknown child node\n",
+ node->name);
+ }
+ }
+
return 0;
}
+static struct of_device_id tegra_pinmux_of_match[] __devinitdata = {
+ { .compatible = "nvidia,tegra20-pinmux", },
+ { },
+};
+
static struct platform_driver tegra_pinmux_driver = {
.driver = {
.name = "tegra-pinmux",
.owner = THIS_MODULE,
+ .of_match_table = tegra_pinmux_of_match,
},
.probe = tegra_pinmux_probe,
};
--
1.7.0.4
^ permalink raw reply related [flat|nested] 69+ messages in thread* [PATCH v3 12/13] arm/tegra: Add device tree support to pinmux driver
@ 2011-08-25 23:43 ` Stephen Warren
0 siblings, 0 replies; 69+ messages in thread
From: Stephen Warren @ 2011-08-25 23:43 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Stephen Warren <swarren@nvidia.com>
[j.iles: converted to generic of_pinmux_parse()]
Signed-off-by: Jamie Iles <jamie@jamieiles.com>
[swarren: Added support for pins property]
Signed-off-by: Stephen Warren <swarren@nvidia.com>
---
arch/arm/mach-tegra/pinmux.c | 260 ++++++++++++++++++++++++++++++++++++++++++
1 files changed, 260 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-tegra/pinmux.c b/arch/arm/mach-tegra/pinmux.c
index ed316f9..7526f7c 100644
--- a/arch/arm/mach-tegra/pinmux.c
+++ b/arch/arm/mach-tegra/pinmux.c
@@ -20,6 +20,9 @@
#include <linux/errno.h>
#include <linux/spinlock.h>
#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_iter_prop.h>
+#include <linux/of_pinmux.h>
#include <linux/platform_device.h>
#include <mach/iomap.h>
@@ -124,6 +127,19 @@ static const char *pingroup_name(enum tegra_pingroup pg)
return pingroups[pg].name;
}
+static int pingroup_enum(const char *name, enum tegra_pingroup *pg_out)
+{
+ int pg;
+
+ for (pg = 0; pg < TEGRA_MAX_PINGROUP; pg++)
+ if (!strcasecmp(name, tegra_soc_pingroups[pg].name)) {
+ *pg_out = pg;
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
static const char *func_name(enum tegra_mux_func func)
{
if (func == TEGRA_MUX_RSVD1)
@@ -147,6 +163,39 @@ static const char *func_name(enum tegra_mux_func func)
return tegra_mux_names[func];
}
+static int func_enum(const char *name, enum tegra_mux_func *func_out)
+{
+ int func;
+
+ if (!strcasecmp(name, "RSVD1")) {
+ *func_out = TEGRA_MUX_RSVD1;
+ return 0;
+ }
+ if (!strcasecmp(name, "RSVD2")) {
+ *func_out = TEGRA_MUX_RSVD2;
+ return 0;
+ }
+ if (!strcasecmp(name, "RSVD3")) {
+ *func_out = TEGRA_MUX_RSVD3;
+ return 0;
+ }
+ if (!strcasecmp(name, "RSVD4")) {
+ *func_out = TEGRA_MUX_RSVD4;
+ return 0;
+ }
+ if (!strcasecmp(name, "NONE")) {
+ *func_out = TEGRA_MUX_NONE;
+ return 0;
+ }
+
+ for (func = 0; func < TEGRA_MAX_MUX; func++)
+ if (!strcasecmp(name, tegra_mux_names[func])) {
+ *func_out = func;
+ return 0;
+ }
+
+ return -EINVAL;
+}
static const char *tri_name(unsigned long val)
{
@@ -329,6 +378,20 @@ static const char *drive_pinmux_name(enum tegra_drive_pingroup pg)
return drive_pingroups[pg].name;
}
+static int drive_pinmux_enum(const char *name,
+ enum tegra_drive_pingroup *pg_out)
+{
+ int pg;
+
+ for (pg = 0; pg < TEGRA_MAX_DRIVE_PINGROUP; pg++)
+ if (!strcasecmp(name, drive_pingroups[pg].name)) {
+ *pg_out = pg;
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
static const char *enable_name(unsigned long val)
{
return val ? "ENABLE" : "DISABLE";
@@ -666,15 +729,212 @@ void tegra_pinmux_config_pullupdown_table(const struct tegra_pingroup_config *co
}
}
+struct tegra_pinmux_configs {
+ struct tegra_pingroup_config tcfg;
+ struct of_pinmux_cfg ocfg;
+};
+
+static int __init tegra_pinmux_dt_parse(const struct of_pinmux_ctrl *ctrl,
+ struct of_pinmux_cfg *cfg)
+{
+ struct tegra_pinmux_configs *cfgs =
+ container_of(cfg, struct tegra_pinmux_configs, ocfg);
+ struct tegra_pingroup_config *tcfg = &cfgs->tcfg;
+ struct of_pinmux_cfg *ocfg = &cfgs->ocfg;
+ int ret;
+
+ ret = func_enum(ocfg->function, &tcfg->func);
+ if (ret < 0) {
+ dev_err(ctrl->dev, "invalid function %s in node %s\n",
+ ocfg->function, ocfg->node->name);
+ return ret;
+ }
+
+ if (ocfg->flags & OF_PINMUX_PULL_UP)
+ tcfg->pupd = TEGRA_PUPD_PULL_UP;
+ else if (ocfg->flags & OF_PINMUX_PULL_DOWN)
+ tcfg->pupd = TEGRA_PUPD_PULL_DOWN;
+ else
+ tcfg->pupd = TEGRA_PUPD_NORMAL;
+
+ tcfg->tristate = (ocfg->flags & OF_PINMUX_TRISTATE) ?
+ TEGRA_TRI_TRISTATE : TEGRA_TRI_NORMAL;
+
+ return 0;
+}
+
+static int __init tegra_pinmux_dt_configure(const struct of_pinmux_ctrl *ctrl,
+ const struct of_pinmux_cfg *cfg)
+{
+ struct tegra_pinmux_configs *cfgs =
+ container_of(cfg, struct tegra_pinmux_configs, ocfg);
+ struct tegra_pingroup_config *tcfg = &cfgs->tcfg;
+ struct of_pinmux_cfg *ocfg = &cfgs->ocfg;
+ int ret;
+
+ ret = pingroup_enum(ocfg->pin, &tcfg->pingroup);
+ if (ret < 0) {
+ dev_err(ctrl->dev, "invalid pingroup %s in node %s\n",
+ ocfg->pin, ocfg->node->name);
+ return ret;
+ }
+
+ tegra_pinmux_config_pingroup(tcfg);
+
+ return 0;
+}
+
+static void __init tegra_pinmux_parse_mux_groups(
+ struct platform_device *pdev,
+ struct device_node *mux_node)
+{
+ struct of_pinmux_ctrl tegra_pinmux_ctrl = {
+ .dev = &pdev->dev,
+ .node = mux_node,
+ .parse = tegra_pinmux_dt_parse,
+ .configure = tegra_pinmux_dt_configure,
+ };
+ struct tegra_pinmux_configs cfgs;
+
+ if (of_pinmux_parse(&tegra_pinmux_ctrl, &cfgs.ocfg))
+ pr_err("failed to parse pinmux configuration\n");
+}
+
+static void __init tegra_pinmux_parse_drive_groups(
+ struct platform_device *pdev,
+ struct device_node *drive_node)
+{
+ struct device_node *np;
+
+ for_each_child_of_node(drive_node, np) {
+ enum tegra_hsm hsm;
+ enum tegra_schmitt schmitt;
+ enum tegra_drive drive;
+ enum tegra_pull_strength pull_down;
+ enum tegra_pull_strength pull_up;
+ enum tegra_slew slew_rising;
+ enum tegra_slew slew_falling;
+ int ret;
+ bool hadpins = 0;
+ struct of_iter_string_prop iter;
+
+ if (of_find_property(np, "nvidia,high-speed-mode", NULL))
+ hsm = TEGRA_HSM_ENABLE;
+ else
+ hsm = TEGRA_HSM_DISABLE;
+
+ if (of_find_property(np, "nvidia,schmitt", NULL))
+ schmitt = TEGRA_SCHMITT_ENABLE;
+ else
+ schmitt = TEGRA_SCHMITT_DISABLE;
+
+ ret = of_property_read_u32(np, "nvidia,drive-power", &drive);
+ if (ret < 0) {
+ dev_err(&pdev->dev,
+ "no nvidia,drive-power for node %s\n",
+ np->name);
+ continue;
+ }
+
+ ret = of_property_read_u32(np, "nvidia,pull-down-strength",
+ &pull_down);
+ if (ret < 0) {
+ dev_err(&pdev->dev,
+ "no nvidia,pull-down-strength for node %s\n",
+ np->name);
+ continue;
+ }
+
+ ret = of_property_read_u32(np, "nvidia,pull-up-strength",
+ &pull_up);
+ if (ret < 0) {
+ dev_err(&pdev->dev,
+ "no nvidia,pull-up-strength for node %s\n",
+ np->name);
+ continue;
+ }
+
+ ret = of_property_read_u32(np, "nvidia,slew-rate-rising",
+ &slew_rising);
+ if (ret < 0) {
+ dev_err(&pdev->dev,
+ "no nvidia,slew_rate-rising for node %s\n",
+ np->name);
+ continue;
+ }
+
+ ret = of_property_read_u32(np, "nvidia,slew-rate-falling",
+ &slew_rising);
+ if (ret < 0) {
+ dev_err(&pdev->dev,
+ "no nvidia,slew_rate-falling for node %s\n",
+ np->name);
+ continue;
+ }
+
+ for_each_string_property_value(iter, np, "pins") {
+ enum tegra_drive_pingroup pg;
+
+ hadpins = 1;
+
+ ret = drive_pinmux_enum(iter.value, &pg);
+ if (ret < 0) {
+ dev_err(&pdev->dev,
+ "invalid pingroup %s in node %s\n",
+ iter.value, np->name);
+ continue;
+ }
+
+ dev_dbg(&pdev->dev,
+ "configure pin %s hsm %d schmitt %d drive %d "
+ "pull_down %d pull_up %d slew_r %d slew_f %d\n",
+ iter.value,
+ hsm, schmitt, drive,
+ pull_down, pull_up,
+ slew_rising, slew_falling);
+
+ tegra_drive_pinmux_config_pingroup(pg, hsm, schmitt,
+ drive, pull_down,
+ pull_up,
+ slew_rising,
+ slew_falling);
+ }
+
+ if (!hadpins)
+ dev_warn(&pdev->dev, "no pins for node %s\n",
+ np->name);
+ }
+}
+
static int __init tegra_pinmux_probe(struct platform_device *pdev)
{
+ if (pdev->dev.of_node != NULL) {
+ struct device_node *node;
+
+ for_each_child_of_node(pdev->dev.of_node, node) {
+ if (!strcmp(node->name, "nvidia,mux-groups"))
+ tegra_pinmux_parse_mux_groups(pdev, node);
+ else if (!strcmp(node->name, "nvidia,drive-groups"))
+ tegra_pinmux_parse_drive_groups(pdev, node);
+ else
+ dev_err(&pdev->dev, "%s: Unknown child node\n",
+ node->name);
+ }
+ }
+
return 0;
}
+static struct of_device_id tegra_pinmux_of_match[] __devinitdata = {
+ { .compatible = "nvidia,tegra20-pinmux", },
+ { },
+};
+
static struct platform_driver tegra_pinmux_driver = {
.driver = {
.name = "tegra-pinmux",
.owner = THIS_MODULE,
+ .of_match_table = tegra_pinmux_of_match,
},
.probe = tegra_pinmux_probe,
};
--
1.7.0.4
^ permalink raw reply related [flat|nested] 69+ messages in thread* [PATCH v3 12/13] arm/tegra: Add device tree support to pinmux driver
@ 2011-08-25 23:43 ` Stephen Warren
0 siblings, 0 replies; 69+ messages in thread
From: Stephen Warren @ 2011-08-25 23:43 UTC (permalink / raw)
To: Grant Likely, Colin Cross, Erik Gilling, Olof Johansson
Cc: Russell King, Arnd Bergmann, devicetree-discuss, linux-tegra,
linux-arm-kernel, linux-kernel, Belisko Marek, Jamie Iles,
Shawn Guo, Sergei Shtylyov, Linus Walleij, Stephen Warren
Signed-off-by: Stephen Warren <swarren@nvidia.com>
[j.iles: converted to generic of_pinmux_parse()]
Signed-off-by: Jamie Iles <jamie@jamieiles.com>
[swarren: Added support for pins property]
Signed-off-by: Stephen Warren <swarren@nvidia.com>
---
arch/arm/mach-tegra/pinmux.c | 260 ++++++++++++++++++++++++++++++++++++++++++
1 files changed, 260 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-tegra/pinmux.c b/arch/arm/mach-tegra/pinmux.c
index ed316f9..7526f7c 100644
--- a/arch/arm/mach-tegra/pinmux.c
+++ b/arch/arm/mach-tegra/pinmux.c
@@ -20,6 +20,9 @@
#include <linux/errno.h>
#include <linux/spinlock.h>
#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_iter_prop.h>
+#include <linux/of_pinmux.h>
#include <linux/platform_device.h>
#include <mach/iomap.h>
@@ -124,6 +127,19 @@ static const char *pingroup_name(enum tegra_pingroup pg)
return pingroups[pg].name;
}
+static int pingroup_enum(const char *name, enum tegra_pingroup *pg_out)
+{
+ int pg;
+
+ for (pg = 0; pg < TEGRA_MAX_PINGROUP; pg++)
+ if (!strcasecmp(name, tegra_soc_pingroups[pg].name)) {
+ *pg_out = pg;
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
static const char *func_name(enum tegra_mux_func func)
{
if (func == TEGRA_MUX_RSVD1)
@@ -147,6 +163,39 @@ static const char *func_name(enum tegra_mux_func func)
return tegra_mux_names[func];
}
+static int func_enum(const char *name, enum tegra_mux_func *func_out)
+{
+ int func;
+
+ if (!strcasecmp(name, "RSVD1")) {
+ *func_out = TEGRA_MUX_RSVD1;
+ return 0;
+ }
+ if (!strcasecmp(name, "RSVD2")) {
+ *func_out = TEGRA_MUX_RSVD2;
+ return 0;
+ }
+ if (!strcasecmp(name, "RSVD3")) {
+ *func_out = TEGRA_MUX_RSVD3;
+ return 0;
+ }
+ if (!strcasecmp(name, "RSVD4")) {
+ *func_out = TEGRA_MUX_RSVD4;
+ return 0;
+ }
+ if (!strcasecmp(name, "NONE")) {
+ *func_out = TEGRA_MUX_NONE;
+ return 0;
+ }
+
+ for (func = 0; func < TEGRA_MAX_MUX; func++)
+ if (!strcasecmp(name, tegra_mux_names[func])) {
+ *func_out = func;
+ return 0;
+ }
+
+ return -EINVAL;
+}
static const char *tri_name(unsigned long val)
{
@@ -329,6 +378,20 @@ static const char *drive_pinmux_name(enum tegra_drive_pingroup pg)
return drive_pingroups[pg].name;
}
+static int drive_pinmux_enum(const char *name,
+ enum tegra_drive_pingroup *pg_out)
+{
+ int pg;
+
+ for (pg = 0; pg < TEGRA_MAX_DRIVE_PINGROUP; pg++)
+ if (!strcasecmp(name, drive_pingroups[pg].name)) {
+ *pg_out = pg;
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
static const char *enable_name(unsigned long val)
{
return val ? "ENABLE" : "DISABLE";
@@ -666,15 +729,212 @@ void tegra_pinmux_config_pullupdown_table(const struct tegra_pingroup_config *co
}
}
+struct tegra_pinmux_configs {
+ struct tegra_pingroup_config tcfg;
+ struct of_pinmux_cfg ocfg;
+};
+
+static int __init tegra_pinmux_dt_parse(const struct of_pinmux_ctrl *ctrl,
+ struct of_pinmux_cfg *cfg)
+{
+ struct tegra_pinmux_configs *cfgs =
+ container_of(cfg, struct tegra_pinmux_configs, ocfg);
+ struct tegra_pingroup_config *tcfg = &cfgs->tcfg;
+ struct of_pinmux_cfg *ocfg = &cfgs->ocfg;
+ int ret;
+
+ ret = func_enum(ocfg->function, &tcfg->func);
+ if (ret < 0) {
+ dev_err(ctrl->dev, "invalid function %s in node %s\n",
+ ocfg->function, ocfg->node->name);
+ return ret;
+ }
+
+ if (ocfg->flags & OF_PINMUX_PULL_UP)
+ tcfg->pupd = TEGRA_PUPD_PULL_UP;
+ else if (ocfg->flags & OF_PINMUX_PULL_DOWN)
+ tcfg->pupd = TEGRA_PUPD_PULL_DOWN;
+ else
+ tcfg->pupd = TEGRA_PUPD_NORMAL;
+
+ tcfg->tristate = (ocfg->flags & OF_PINMUX_TRISTATE) ?
+ TEGRA_TRI_TRISTATE : TEGRA_TRI_NORMAL;
+
+ return 0;
+}
+
+static int __init tegra_pinmux_dt_configure(const struct of_pinmux_ctrl *ctrl,
+ const struct of_pinmux_cfg *cfg)
+{
+ struct tegra_pinmux_configs *cfgs =
+ container_of(cfg, struct tegra_pinmux_configs, ocfg);
+ struct tegra_pingroup_config *tcfg = &cfgs->tcfg;
+ struct of_pinmux_cfg *ocfg = &cfgs->ocfg;
+ int ret;
+
+ ret = pingroup_enum(ocfg->pin, &tcfg->pingroup);
+ if (ret < 0) {
+ dev_err(ctrl->dev, "invalid pingroup %s in node %s\n",
+ ocfg->pin, ocfg->node->name);
+ return ret;
+ }
+
+ tegra_pinmux_config_pingroup(tcfg);
+
+ return 0;
+}
+
+static void __init tegra_pinmux_parse_mux_groups(
+ struct platform_device *pdev,
+ struct device_node *mux_node)
+{
+ struct of_pinmux_ctrl tegra_pinmux_ctrl = {
+ .dev = &pdev->dev,
+ .node = mux_node,
+ .parse = tegra_pinmux_dt_parse,
+ .configure = tegra_pinmux_dt_configure,
+ };
+ struct tegra_pinmux_configs cfgs;
+
+ if (of_pinmux_parse(&tegra_pinmux_ctrl, &cfgs.ocfg))
+ pr_err("failed to parse pinmux configuration\n");
+}
+
+static void __init tegra_pinmux_parse_drive_groups(
+ struct platform_device *pdev,
+ struct device_node *drive_node)
+{
+ struct device_node *np;
+
+ for_each_child_of_node(drive_node, np) {
+ enum tegra_hsm hsm;
+ enum tegra_schmitt schmitt;
+ enum tegra_drive drive;
+ enum tegra_pull_strength pull_down;
+ enum tegra_pull_strength pull_up;
+ enum tegra_slew slew_rising;
+ enum tegra_slew slew_falling;
+ int ret;
+ bool hadpins = 0;
+ struct of_iter_string_prop iter;
+
+ if (of_find_property(np, "nvidia,high-speed-mode", NULL))
+ hsm = TEGRA_HSM_ENABLE;
+ else
+ hsm = TEGRA_HSM_DISABLE;
+
+ if (of_find_property(np, "nvidia,schmitt", NULL))
+ schmitt = TEGRA_SCHMITT_ENABLE;
+ else
+ schmitt = TEGRA_SCHMITT_DISABLE;
+
+ ret = of_property_read_u32(np, "nvidia,drive-power", &drive);
+ if (ret < 0) {
+ dev_err(&pdev->dev,
+ "no nvidia,drive-power for node %s\n",
+ np->name);
+ continue;
+ }
+
+ ret = of_property_read_u32(np, "nvidia,pull-down-strength",
+ &pull_down);
+ if (ret < 0) {
+ dev_err(&pdev->dev,
+ "no nvidia,pull-down-strength for node %s\n",
+ np->name);
+ continue;
+ }
+
+ ret = of_property_read_u32(np, "nvidia,pull-up-strength",
+ &pull_up);
+ if (ret < 0) {
+ dev_err(&pdev->dev,
+ "no nvidia,pull-up-strength for node %s\n",
+ np->name);
+ continue;
+ }
+
+ ret = of_property_read_u32(np, "nvidia,slew-rate-rising",
+ &slew_rising);
+ if (ret < 0) {
+ dev_err(&pdev->dev,
+ "no nvidia,slew_rate-rising for node %s\n",
+ np->name);
+ continue;
+ }
+
+ ret = of_property_read_u32(np, "nvidia,slew-rate-falling",
+ &slew_rising);
+ if (ret < 0) {
+ dev_err(&pdev->dev,
+ "no nvidia,slew_rate-falling for node %s\n",
+ np->name);
+ continue;
+ }
+
+ for_each_string_property_value(iter, np, "pins") {
+ enum tegra_drive_pingroup pg;
+
+ hadpins = 1;
+
+ ret = drive_pinmux_enum(iter.value, &pg);
+ if (ret < 0) {
+ dev_err(&pdev->dev,
+ "invalid pingroup %s in node %s\n",
+ iter.value, np->name);
+ continue;
+ }
+
+ dev_dbg(&pdev->dev,
+ "configure pin %s hsm %d schmitt %d drive %d "
+ "pull_down %d pull_up %d slew_r %d slew_f %d\n",
+ iter.value,
+ hsm, schmitt, drive,
+ pull_down, pull_up,
+ slew_rising, slew_falling);
+
+ tegra_drive_pinmux_config_pingroup(pg, hsm, schmitt,
+ drive, pull_down,
+ pull_up,
+ slew_rising,
+ slew_falling);
+ }
+
+ if (!hadpins)
+ dev_warn(&pdev->dev, "no pins for node %s\n",
+ np->name);
+ }
+}
+
static int __init tegra_pinmux_probe(struct platform_device *pdev)
{
+ if (pdev->dev.of_node != NULL) {
+ struct device_node *node;
+
+ for_each_child_of_node(pdev->dev.of_node, node) {
+ if (!strcmp(node->name, "nvidia,mux-groups"))
+ tegra_pinmux_parse_mux_groups(pdev, node);
+ else if (!strcmp(node->name, "nvidia,drive-groups"))
+ tegra_pinmux_parse_drive_groups(pdev, node);
+ else
+ dev_err(&pdev->dev, "%s: Unknown child node\n",
+ node->name);
+ }
+ }
+
return 0;
}
+static struct of_device_id tegra_pinmux_of_match[] __devinitdata = {
+ { .compatible = "nvidia,tegra20-pinmux", },
+ { },
+};
+
static struct platform_driver tegra_pinmux_driver = {
.driver = {
.name = "tegra-pinmux",
.owner = THIS_MODULE,
+ .of_match_table = tegra_pinmux_of_match,
},
.probe = tegra_pinmux_probe,
};
--
1.7.0.4
^ permalink raw reply related [flat|nested] 69+ messages in thread
* [PATCH v3 13/13] arm/tegra: board-dt: Remove dependency on non-dt pinmux functions
2011-08-25 23:43 ` Stephen Warren
(?)
@ 2011-08-25 23:43 ` Stephen Warren
-1 siblings, 0 replies; 69+ messages in thread
From: Stephen Warren @ 2011-08-25 23:43 UTC (permalink / raw)
To: Grant Likely, Colin Cross, Erik Gilling, Olof Johansson
Cc: Russell King, Arnd Bergmann,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
linux-tegra-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Belisko Marek, Jamie Iles,
Shawn Guo, Sergei Shtylyov, Linus Walleij, Stephen Warren
Signed-off-by: Stephen Warren <swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
arch/arm/mach-tegra/Makefile | 1 -
arch/arm/mach-tegra/board-dt.c | 10 ----------
2 files changed, 0 insertions(+), 11 deletions(-)
diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile
index f11b910..bab6544 100644
--- a/arch/arm/mach-tegra/Makefile
+++ b/arch/arm/mach-tegra/Makefile
@@ -30,7 +30,6 @@ obj-${CONFIG_MACH_SEABOARD} += board-seaboard.o
obj-${CONFIG_MACH_SEABOARD} += board-seaboard-pinmux.o
obj-${CONFIG_MACH_TEGRA_DT} += board-dt.o
-obj-${CONFIG_MACH_TEGRA_DT} += board-harmony-pinmux.o
obj-${CONFIG_MACH_TRIMSLICE} += board-trimslice.o
obj-${CONFIG_MACH_TRIMSLICE} += board-trimslice-pinmux.o
diff --git a/arch/arm/mach-tegra/board-dt.c b/arch/arm/mach-tegra/board-dt.c
index 9f47e04..b6b3f28 100644
--- a/arch/arm/mach-tegra/board-dt.c
+++ b/arch/arm/mach-tegra/board-dt.c
@@ -41,14 +41,9 @@
#include <mach/irqs.h>
#include "board.h"
-#include "board-harmony.h"
#include "clock.h"
#include "devices.h"
-void harmony_pinmux_init(void);
-void seaboard_pinmux_init(void);
-
-
struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC1_BASE, "sdhci-tegra.0", NULL),
OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC2_BASE, "sdhci-tegra.1", NULL),
@@ -91,11 +86,6 @@ static void __init tegra_dt_init(void)
tegra_clk_init_from_table(tegra_dt_clk_init_table);
- if (of_machine_is_compatible("nvidia,harmony"))
- harmony_pinmux_init();
- else if (of_machine_is_compatible("nvidia,seaboard"))
- seaboard_pinmux_init();
-
/*
* Finished with the static registrations now; fill in the missing
* devices
--
1.7.0.4
^ permalink raw reply related [flat|nested] 69+ messages in thread* [PATCH v3 13/13] arm/tegra: board-dt: Remove dependency on non-dt pinmux functions
@ 2011-08-25 23:43 ` Stephen Warren
0 siblings, 0 replies; 69+ messages in thread
From: Stephen Warren @ 2011-08-25 23:43 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Stephen Warren <swarren@nvidia.com>
---
arch/arm/mach-tegra/Makefile | 1 -
arch/arm/mach-tegra/board-dt.c | 10 ----------
2 files changed, 0 insertions(+), 11 deletions(-)
diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile
index f11b910..bab6544 100644
--- a/arch/arm/mach-tegra/Makefile
+++ b/arch/arm/mach-tegra/Makefile
@@ -30,7 +30,6 @@ obj-${CONFIG_MACH_SEABOARD} += board-seaboard.o
obj-${CONFIG_MACH_SEABOARD} += board-seaboard-pinmux.o
obj-${CONFIG_MACH_TEGRA_DT} += board-dt.o
-obj-${CONFIG_MACH_TEGRA_DT} += board-harmony-pinmux.o
obj-${CONFIG_MACH_TRIMSLICE} += board-trimslice.o
obj-${CONFIG_MACH_TRIMSLICE} += board-trimslice-pinmux.o
diff --git a/arch/arm/mach-tegra/board-dt.c b/arch/arm/mach-tegra/board-dt.c
index 9f47e04..b6b3f28 100644
--- a/arch/arm/mach-tegra/board-dt.c
+++ b/arch/arm/mach-tegra/board-dt.c
@@ -41,14 +41,9 @@
#include <mach/irqs.h>
#include "board.h"
-#include "board-harmony.h"
#include "clock.h"
#include "devices.h"
-void harmony_pinmux_init(void);
-void seaboard_pinmux_init(void);
-
-
struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC1_BASE, "sdhci-tegra.0", NULL),
OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC2_BASE, "sdhci-tegra.1", NULL),
@@ -91,11 +86,6 @@ static void __init tegra_dt_init(void)
tegra_clk_init_from_table(tegra_dt_clk_init_table);
- if (of_machine_is_compatible("nvidia,harmony"))
- harmony_pinmux_init();
- else if (of_machine_is_compatible("nvidia,seaboard"))
- seaboard_pinmux_init();
-
/*
* Finished with the static registrations now; fill in the missing
* devices
--
1.7.0.4
^ permalink raw reply related [flat|nested] 69+ messages in thread* [PATCH v3 13/13] arm/tegra: board-dt: Remove dependency on non-dt pinmux functions
@ 2011-08-25 23:43 ` Stephen Warren
0 siblings, 0 replies; 69+ messages in thread
From: Stephen Warren @ 2011-08-25 23:43 UTC (permalink / raw)
To: Grant Likely, Colin Cross, Erik Gilling, Olof Johansson
Cc: Russell King, Arnd Bergmann, devicetree-discuss, linux-tegra,
linux-arm-kernel, linux-kernel, Belisko Marek, Jamie Iles,
Shawn Guo, Sergei Shtylyov, Linus Walleij, Stephen Warren
Signed-off-by: Stephen Warren <swarren@nvidia.com>
---
arch/arm/mach-tegra/Makefile | 1 -
arch/arm/mach-tegra/board-dt.c | 10 ----------
2 files changed, 0 insertions(+), 11 deletions(-)
diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile
index f11b910..bab6544 100644
--- a/arch/arm/mach-tegra/Makefile
+++ b/arch/arm/mach-tegra/Makefile
@@ -30,7 +30,6 @@ obj-${CONFIG_MACH_SEABOARD} += board-seaboard.o
obj-${CONFIG_MACH_SEABOARD} += board-seaboard-pinmux.o
obj-${CONFIG_MACH_TEGRA_DT} += board-dt.o
-obj-${CONFIG_MACH_TEGRA_DT} += board-harmony-pinmux.o
obj-${CONFIG_MACH_TRIMSLICE} += board-trimslice.o
obj-${CONFIG_MACH_TRIMSLICE} += board-trimslice-pinmux.o
diff --git a/arch/arm/mach-tegra/board-dt.c b/arch/arm/mach-tegra/board-dt.c
index 9f47e04..b6b3f28 100644
--- a/arch/arm/mach-tegra/board-dt.c
+++ b/arch/arm/mach-tegra/board-dt.c
@@ -41,14 +41,9 @@
#include <mach/irqs.h>
#include "board.h"
-#include "board-harmony.h"
#include "clock.h"
#include "devices.h"
-void harmony_pinmux_init(void);
-void seaboard_pinmux_init(void);
-
-
struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC1_BASE, "sdhci-tegra.0", NULL),
OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC2_BASE, "sdhci-tegra.1", NULL),
@@ -91,11 +86,6 @@ static void __init tegra_dt_init(void)
tegra_clk_init_from_table(tegra_dt_clk_init_table);
- if (of_machine_is_compatible("nvidia,harmony"))
- harmony_pinmux_init();
- else if (of_machine_is_compatible("nvidia,seaboard"))
- seaboard_pinmux_init();
-
/*
* Finished with the static registrations now; fill in the missing
* devices
--
1.7.0.4
^ permalink raw reply related [flat|nested] 69+ messages in thread
* Re: [PATCH v3 00/13] arm/tegra: Initialize GPIO & pinmux from DT
2011-08-25 23:43 ` Stephen Warren
(?)
@ 2011-08-26 5:04 ` Olof Johansson
-1 siblings, 0 replies; 69+ messages in thread
From: Olof Johansson @ 2011-08-26 5:04 UTC (permalink / raw)
To: Stephen Warren
Cc: Grant Likely, Colin Cross, Erik Gilling, Russell King,
Arnd Bergmann, devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
linux-tegra-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Belisko Marek, Jamie Iles,
Shawn Guo, Sergei Shtylyov, Linus Walleij
On Thu, Aug 25, 2011 at 4:43 PM, Stephen Warren <swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org> wrote:
> v3:
> * Build on Jamie Iles' patches to split some of the DT parsing into
> common code.
> * Renamed some properties to remove "nvidia," from name; they can be
> generic.
> * Support pins property, to apply DT nodes to multiple pins/groups
> * Some minor error-message changes driven by some of the above.
> * Removed requirement to #ifdef CONFIG_OF
> * Removed AUXDATA table entries in mach-tegra/board-dt.c
>
> TODO:
> * Convert from using strings to using integers for the function and pin
> names. This relies on the dtc patches I posted yesterday, but should
> be pretty simple once they're in.
>
> Jamie Iles (1):
> of: add a generic pinmux helper
>
> Stephen Warren (12):
> arm/tegra: Prep boards for gpio/pinmux conversion to pdevs
> docs/dt: Document nvidia,tegra20-gpio's nvidia,enabled-gpios property
> arm/dt: Tegra: Add nvidia,enabled-gpios property to GPIO controller
> docs/dt: Document nvidia,tegra20-pinmux binding
> arm/dt: Tegra: Add pinmux node
> dt: add empty for_each_child_of_node, of_find_property
> gpio/tegra: Convert to a platform device
> gpio/tegra: Add device tree support
> arm/tegra: Convert pinmux driver to a platform device
> of: add property iteration helpers
> arm/tegra: Add device tree support to pinmux driver
> arm/tegra: board-dt: Remove dependency on non-dt pinmux functions
This is looking pretty sane to me.
Grant, how do you prefer to handle this, since it spans of/dt, gpio
and tegra code? I can start a topic branch for Arnd to pull in for the
tegra parts, would you prefer picking up the of helper functions on
your own or is an ack from you and merge through the arm-soc tree
easier?
-Olof
^ permalink raw reply [flat|nested] 69+ messages in thread
* [PATCH v3 00/13] arm/tegra: Initialize GPIO & pinmux from DT
@ 2011-08-26 5:04 ` Olof Johansson
0 siblings, 0 replies; 69+ messages in thread
From: Olof Johansson @ 2011-08-26 5:04 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Aug 25, 2011 at 4:43 PM, Stephen Warren <swarren@nvidia.com> wrote:
> v3:
> * Build on Jamie Iles' patches to split some of the DT parsing into
> ?common code.
> * Renamed some properties to remove "nvidia," from name; they can be
> ?generic.
> * Support pins property, to apply DT nodes to multiple pins/groups
> * Some minor error-message changes driven by some of the above.
> * Removed requirement to #ifdef CONFIG_OF
> * Removed AUXDATA table entries in mach-tegra/board-dt.c
>
> TODO:
> * Convert from using strings to using integers for the function and pin
> ?names. This relies on the dtc patches I posted yesterday, but should
> ?be pretty simple once they're in.
>
> Jamie Iles (1):
> ?of: add a generic pinmux helper
>
> Stephen Warren (12):
> ?arm/tegra: Prep boards for gpio/pinmux conversion to pdevs
> ?docs/dt: Document nvidia,tegra20-gpio's nvidia,enabled-gpios property
> ?arm/dt: Tegra: Add nvidia,enabled-gpios property to GPIO controller
> ?docs/dt: Document nvidia,tegra20-pinmux binding
> ?arm/dt: Tegra: Add pinmux node
> ?dt: add empty for_each_child_of_node, of_find_property
> ?gpio/tegra: Convert to a platform device
> ?gpio/tegra: Add device tree support
> ?arm/tegra: Convert pinmux driver to a platform device
> ?of: add property iteration helpers
> ?arm/tegra: Add device tree support to pinmux driver
> ?arm/tegra: board-dt: Remove dependency on non-dt pinmux functions
This is looking pretty sane to me.
Grant, how do you prefer to handle this, since it spans of/dt, gpio
and tegra code? I can start a topic branch for Arnd to pull in for the
tegra parts, would you prefer picking up the of helper functions on
your own or is an ack from you and merge through the arm-soc tree
easier?
-Olof
^ permalink raw reply [flat|nested] 69+ messages in thread
* Re: [PATCH v3 00/13] arm/tegra: Initialize GPIO & pinmux from DT
@ 2011-08-26 5:04 ` Olof Johansson
0 siblings, 0 replies; 69+ messages in thread
From: Olof Johansson @ 2011-08-26 5:04 UTC (permalink / raw)
To: Stephen Warren
Cc: Grant Likely, Colin Cross, Erik Gilling, Russell King,
Arnd Bergmann, devicetree-discuss, linux-tegra, linux-arm-kernel,
linux-kernel, Belisko Marek, Jamie Iles, Shawn Guo,
Sergei Shtylyov, Linus Walleij
On Thu, Aug 25, 2011 at 4:43 PM, Stephen Warren <swarren@nvidia.com> wrote:
> v3:
> * Build on Jamie Iles' patches to split some of the DT parsing into
> common code.
> * Renamed some properties to remove "nvidia," from name; they can be
> generic.
> * Support pins property, to apply DT nodes to multiple pins/groups
> * Some minor error-message changes driven by some of the above.
> * Removed requirement to #ifdef CONFIG_OF
> * Removed AUXDATA table entries in mach-tegra/board-dt.c
>
> TODO:
> * Convert from using strings to using integers for the function and pin
> names. This relies on the dtc patches I posted yesterday, but should
> be pretty simple once they're in.
>
> Jamie Iles (1):
> of: add a generic pinmux helper
>
> Stephen Warren (12):
> arm/tegra: Prep boards for gpio/pinmux conversion to pdevs
> docs/dt: Document nvidia,tegra20-gpio's nvidia,enabled-gpios property
> arm/dt: Tegra: Add nvidia,enabled-gpios property to GPIO controller
> docs/dt: Document nvidia,tegra20-pinmux binding
> arm/dt: Tegra: Add pinmux node
> dt: add empty for_each_child_of_node, of_find_property
> gpio/tegra: Convert to a platform device
> gpio/tegra: Add device tree support
> arm/tegra: Convert pinmux driver to a platform device
> of: add property iteration helpers
> arm/tegra: Add device tree support to pinmux driver
> arm/tegra: board-dt: Remove dependency on non-dt pinmux functions
This is looking pretty sane to me.
Grant, how do you prefer to handle this, since it spans of/dt, gpio
and tegra code? I can start a topic branch for Arnd to pull in for the
tegra parts, would you prefer picking up the of helper functions on
your own or is an ack from you and merge through the arm-soc tree
easier?
-Olof
^ permalink raw reply [flat|nested] 69+ messages in thread
[parent not found: <CAOesGMiygfaNkPa7uURCiJpC=WDinWhKi07LFgJ+5JoGW_fLKw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>]
* RE: [PATCH v3 00/13] arm/tegra: Initialize GPIO & pinmux from DT
2011-08-26 5:04 ` Olof Johansson
(?)
@ 2011-08-26 16:07 ` Stephen Warren
-1 siblings, 0 replies; 69+ messages in thread
From: Stephen Warren @ 2011-08-26 16:07 UTC (permalink / raw)
To: Olof Johansson
Cc: Grant Likely, Colin Cross, Erik Gilling, Russell King,
Arnd Bergmann, devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
linux-tegra-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Belisko Marek, Jamie Iles,
Shawn Guo, Sergei Shtylyov, Linus Walleij
Olof Johansson wrote at Thursday, August 25, 2011 11:05 PM:
> On Thu, Aug 25, 2011 at 4:43 PM, Stephen Warren <swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org> wrote:
> > v3:
...
> This is looking pretty sane to me.
>
> Grant, how do you prefer to handle this, since it spans of/dt, gpio
> and tegra code? I can start a topic branch for Arnd to pull in for the
> tegra parts, would you prefer picking up the of helper functions on
> your own or is an ack from you and merge through the arm-soc tree
> easier?
I haven't thought through all the merging details yet, but do be aware
of the dependencies this patchset has:
1) Rename of arch/arm/mach-tegra/gpio.c -> drivers/gpio/gpio-tegra.c
This is in Grant's gpio for-next branch, and hence linux-next.
This is in some GPIO-related branch of Russell's.
2) Various previous Tegra <mach/gpio.h> rework.
This is in some GPIO-related branch of Russell's; I assume the same one
as (1), but I can't actually find this branch, so can't check.
Neither of those is in any Linus release or rc.
I *think* that's it.
For reference, this patchset was physical written/tested on top of
next-20110823, with the patches mentioned in (2) aboe, and some others that
hopefully aren't relevant, between linux-next and this patchset.
--
nvpublic
^ permalink raw reply [flat|nested] 69+ messages in thread
* [PATCH v3 00/13] arm/tegra: Initialize GPIO & pinmux from DT
@ 2011-08-26 16:07 ` Stephen Warren
0 siblings, 0 replies; 69+ messages in thread
From: Stephen Warren @ 2011-08-26 16:07 UTC (permalink / raw)
To: linux-arm-kernel
Olof Johansson wrote at Thursday, August 25, 2011 11:05 PM:
> On Thu, Aug 25, 2011 at 4:43 PM, Stephen Warren <swarren@nvidia.com> wrote:
> > v3:
...
> This is looking pretty sane to me.
>
> Grant, how do you prefer to handle this, since it spans of/dt, gpio
> and tegra code? I can start a topic branch for Arnd to pull in for the
> tegra parts, would you prefer picking up the of helper functions on
> your own or is an ack from you and merge through the arm-soc tree
> easier?
I haven't thought through all the merging details yet, but do be aware
of the dependencies this patchset has:
1) Rename of arch/arm/mach-tegra/gpio.c -> drivers/gpio/gpio-tegra.c
This is in Grant's gpio for-next branch, and hence linux-next.
This is in some GPIO-related branch of Russell's.
2) Various previous Tegra <mach/gpio.h> rework.
This is in some GPIO-related branch of Russell's; I assume the same one
as (1), but I can't actually find this branch, so can't check.
Neither of those is in any Linus release or rc.
I *think* that's it.
For reference, this patchset was physical written/tested on top of
next-20110823, with the patches mentioned in (2) aboe, and some others that
hopefully aren't relevant, between linux-next and this patchset.
--
nvpublic
^ permalink raw reply [flat|nested] 69+ messages in thread
* RE: [PATCH v3 00/13] arm/tegra: Initialize GPIO & pinmux from DT
@ 2011-08-26 16:07 ` Stephen Warren
0 siblings, 0 replies; 69+ messages in thread
From: Stephen Warren @ 2011-08-26 16:07 UTC (permalink / raw)
To: Olof Johansson
Cc: Grant Likely, Colin Cross, Erik Gilling, Russell King,
Arnd Bergmann, devicetree-discuss, linux-tegra, linux-arm-kernel,
linux-kernel, Belisko Marek, Jamie Iles, Shawn Guo,
Sergei Shtylyov, Linus Walleij
Olof Johansson wrote at Thursday, August 25, 2011 11:05 PM:
> On Thu, Aug 25, 2011 at 4:43 PM, Stephen Warren <swarren@nvidia.com> wrote:
> > v3:
...
> This is looking pretty sane to me.
>
> Grant, how do you prefer to handle this, since it spans of/dt, gpio
> and tegra code? I can start a topic branch for Arnd to pull in for the
> tegra parts, would you prefer picking up the of helper functions on
> your own or is an ack from you and merge through the arm-soc tree
> easier?
I haven't thought through all the merging details yet, but do be aware
of the dependencies this patchset has:
1) Rename of arch/arm/mach-tegra/gpio.c -> drivers/gpio/gpio-tegra.c
This is in Grant's gpio for-next branch, and hence linux-next.
This is in some GPIO-related branch of Russell's.
2) Various previous Tegra <mach/gpio.h> rework.
This is in some GPIO-related branch of Russell's; I assume the same one
as (1), but I can't actually find this branch, so can't check.
Neither of those is in any Linus release or rc.
I *think* that's it.
For reference, this patchset was physical written/tested on top of
next-20110823, with the patches mentioned in (2) aboe, and some others that
hopefully aren't relevant, between linux-next and this patchset.
--
nvpublic
^ permalink raw reply [flat|nested] 69+ messages in thread