* [PATCH 0/2] ext4: Some MMP fixes @ 2011-09-23 0:23 Nikitas Angelinas 2011-09-23 0:23 ` [PATCH 1/2] ext4: MMP: kmmpd should use nodename from init_uts_ns.name, not sysname Nikitas Angelinas ` (2 more replies) 0 siblings, 3 replies; 13+ messages in thread From: Nikitas Angelinas @ 2011-09-23 0:23 UTC (permalink / raw) To: tytso, adilger.kernel, adilger, johann Cc: linux-ext4, linux-kernel, nikitas_angelinas, andrew_perepechko Some small fixes for the multiple mount protection feature in ext4. Nikitas Angelinas (2): ext4: MMP: kmmpd should use nodename from init_uts_ns.name, not sysname ext4: MMP: fix error message rate-limiting logic in kmmpd fs/ext4/mmp.c | 7 ++++--- 1 files changed, 4 insertions(+), 3 deletions(-) ^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH 1/2] ext4: MMP: kmmpd should use nodename from init_uts_ns.name, not sysname 2011-09-23 0:23 [PATCH 0/2] ext4: Some MMP fixes Nikitas Angelinas @ 2011-09-23 0:23 ` Nikitas Angelinas 2011-09-23 8:24 ` Andrew Perepechko 2011-09-23 18:51 ` Andreas Dilger 2011-09-23 0:23 ` [PATCH 2/2] ext4: MMP: fix error message rate-limiting logic in kmmpd Nikitas Angelinas 2011-09-29 23:38 ` (unknown), Nikitas Angelinas 2 siblings, 2 replies; 13+ messages in thread From: Nikitas Angelinas @ 2011-09-23 0:23 UTC (permalink / raw) To: tytso, adilger.kernel, adilger, johann Cc: linux-ext4, linux-kernel, nikitas_angelinas, andrew_perepechko sysname holds "Linux" by default, i.e. what appears when doing a "uname -s"; nodename should be used to print the machine's hostname, i.e. what is returned when doing a "uname -n" or "hostname", and what gethostname(2)/sethostname(2) manipulate, in order to notify the administrator of the node which is contending to mount the filesystem. Signed-off-by: Nikitas Angelinas <nikitas_angelinas@xyratex.com> Signed-off-by: Andrew Perepechko <andrew_perepechko@xyratex.com> --- fs/ext4/mmp.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/fs/ext4/mmp.c b/fs/ext4/mmp.c index 9bdef3f..2fca64e 100644 --- a/fs/ext4/mmp.c +++ b/fs/ext4/mmp.c @@ -109,7 +109,7 @@ static int kmmpd(void *data) mmp->mmp_check_interval = cpu_to_le16(mmp_check_interval); bdevname(bh->b_bdev, mmp->mmp_bdevname); - memcpy(mmp->mmp_nodename, init_utsname()->sysname, + memcpy(mmp->mmp_nodename, init_utsname()->nodename, sizeof(mmp->mmp_nodename)); while (!kthread_should_stop()) { -- 1.7.4.4 ^ permalink raw reply related [flat|nested] 13+ messages in thread
* Re: [PATCH 1/2] ext4: MMP: kmmpd should use nodename from init_uts_ns.name, not sysname 2011-09-23 0:23 ` [PATCH 1/2] ext4: MMP: kmmpd should use nodename from init_uts_ns.name, not sysname Nikitas Angelinas @ 2011-09-23 8:24 ` Andrew Perepechko 2011-09-23 11:30 ` Andrew Perepechko 2011-09-23 18:51 ` Andreas Dilger 1 sibling, 1 reply; 13+ messages in thread From: Andrew Perepechko @ 2011-09-23 8:24 UTC (permalink / raw) To: Nikitas Angelinas Cc: tytso, adilger.kernel, adilger, johann, linux-ext4, linux-kernel, nikitas_angelinas Hello Nikitas! It looks like some bits of your patches somehow got dropped. Andrew On 09/23/2011 04:23 AM, Nikitas Angelinas wrote: > sysname holds "Linux" by default, i.e. what appears when doing a "uname > -s"; nodename should be used to print the machine's hostname, i.e. what > is returned when doing a "uname -n" or "hostname", and what > gethostname(2)/sethostname(2) manipulate, in order to notify the > administrator of the node which is contending to mount the filesystem. > > Signed-off-by: Nikitas Angelinas<nikitas_angelinas@xyratex.com> > Signed-off-by: Andrew Perepechko<andrew_perepechko@xyratex.com> > --- > fs/ext4/mmp.c | 2 +- > 1 files changed, 1 insertions(+), 1 deletions(-) > > diff --git a/fs/ext4/mmp.c b/fs/ext4/mmp.c > index 9bdef3f..2fca64e 100644 > --- a/fs/ext4/mmp.c > +++ b/fs/ext4/mmp.c > @@ -109,7 +109,7 @@ static int kmmpd(void *data) > mmp->mmp_check_interval = cpu_to_le16(mmp_check_interval); > bdevname(bh->b_bdev, mmp->mmp_bdevname); > > - memcpy(mmp->mmp_nodename, init_utsname()->sysname, > + memcpy(mmp->mmp_nodename, init_utsname()->nodename, > sizeof(mmp->mmp_nodename)); > > while (!kthread_should_stop()) { ______________________________________________________________________ This email may contain privileged or confidential information, which should only be used for the purpose for which it was sent by Xyratex. No further rights or licenses are granted to use such information. If you are not the intended recipient of this message, please notify the sender by return and delete it. You may not use, copy, disclose or rely on the information contained in it. Internet email is susceptible to data corruption, interception and unauthorised amendment for which Xyratex does not accept liability. While we have taken reasonable precautions to ensure that this email is free of viruses, Xyratex does not accept liability for the presence of any computer viruses in this email, nor for any losses caused as a result of viruses. Xyratex Technology Limited (03134912), Registered in England & Wales, Registered Office, Langstone Road, Havant, Hampshire, PO9 1SA. The Xyratex group of companies also includes, Xyratex Ltd, registered in Bermuda, Xyratex International Inc, registered in California, Xyratex (Malaysia) Sdn Bhd registered in Malaysia, Xyratex Technology (Wuxi) Co Ltd registered in The People's Republic of China and Xyratex Japan Limited registered in Japan. ______________________________________________________________________ ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 1/2] ext4: MMP: kmmpd should use nodename from init_uts_ns.name, not sysname 2011-09-23 8:24 ` Andrew Perepechko @ 2011-09-23 11:30 ` Andrew Perepechko 0 siblings, 0 replies; 13+ messages in thread From: Andrew Perepechko @ 2011-09-23 11:30 UTC (permalink / raw) To: Nikitas Angelinas Cc: tytso, adilger.kernel, adilger, johann, linux-ext4, linux-kernel, nikitas_angelinas Never mind, they are not relevant. Andrew On 09/23/2011 12:24 PM, Andrew Perepechko wrote: > Hello Nikitas! > > It looks like some bits of your patches somehow got dropped. > > Andrew > > On 09/23/2011 04:23 AM, Nikitas Angelinas wrote: >> sysname holds "Linux" by default, i.e. what appears when doing a "uname >> -s"; nodename should be used to print the machine's hostname, i.e. what >> is returned when doing a "uname -n" or "hostname", and what >> gethostname(2)/sethostname(2) manipulate, in order to notify the >> administrator of the node which is contending to mount the filesystem. >> >> Signed-off-by: Nikitas Angelinas<nikitas_angelinas@xyratex.com> >> Signed-off-by: Andrew Perepechko<andrew_perepechko@xyratex.com> >> --- >> fs/ext4/mmp.c | 2 +- >> 1 files changed, 1 insertions(+), 1 deletions(-) >> >> diff --git a/fs/ext4/mmp.c b/fs/ext4/mmp.c >> index 9bdef3f..2fca64e 100644 >> --- a/fs/ext4/mmp.c >> +++ b/fs/ext4/mmp.c >> @@ -109,7 +109,7 @@ static int kmmpd(void *data) >> mmp->mmp_check_interval = cpu_to_le16(mmp_check_interval); >> bdevname(bh->b_bdev, mmp->mmp_bdevname); >> >> - memcpy(mmp->mmp_nodename, init_utsname()->sysname, >> + memcpy(mmp->mmp_nodename, init_utsname()->nodename, >> sizeof(mmp->mmp_nodename)); >> >> while (!kthread_should_stop()) { > ______________________________________________________________________ This email may contain privileged or confidential information, which should only be used for the purpose for which it was sent by Xyratex. No further rights or licenses are granted to use such information. If you are not the intended recipient of this message, please notify the sender by return and delete it. You may not use, copy, disclose or rely on the information contained in it. Internet email is susceptible to data corruption, interception and unauthorised amendment for which Xyratex does not accept liability. While we have taken reasonable precautions to ensure that this email is free of viruses, Xyratex does not accept liability for the presence of any computer viruses in this email, nor for any losses caused as a result of viruses. Xyratex Technology Limited (03134912), Registered in England & Wales, Registered Office, Langstone Road, Havant, Hampshire, PO9 1SA. The Xyratex group of companies also includes, Xyratex Ltd, registered in Bermuda, Xyratex International Inc, registered in California, Xyratex (Malaysia) Sdn Bhd registered in Malaysia, Xyratex Technology (Wuxi) Co Ltd registered in The People's Republic of China and Xyratex Japan Limited registered in Japan. ______________________________________________________________________ ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 1/2] ext4: MMP: kmmpd should use nodename from init_uts_ns.name, not sysname 2011-09-23 0:23 ` [PATCH 1/2] ext4: MMP: kmmpd should use nodename from init_uts_ns.name, not sysname Nikitas Angelinas 2011-09-23 8:24 ` Andrew Perepechko @ 2011-09-23 18:51 ` Andreas Dilger 1 sibling, 0 replies; 13+ messages in thread From: Andreas Dilger @ 2011-09-23 18:51 UTC (permalink / raw) To: Nikitas Angelinas, Theodore Tso Cc: Johann Lombardi, Ext4 Developers List, linux-kernel Kernel, Nikitas Angelinas, andrew_perepechko On 2011-09-22, at 6:23 PM, Nikitas Angelinas wrote: > sysname holds "Linux" by default, i.e. what appears when doing a "uname > -s"; nodename should be used to print the machine's hostname, i.e. what > is returned when doing a "uname -n" or "hostname", and what > gethostname(2)/sethostname(2) manipulate, in order to notify the > administrator of the node which is contending to mount the filesystem. > > Signed-off-by: Nikitas Angelinas <nikitas_angelinas@xyratex.com> > Signed-off-by: Andrew Perepechko <andrew_perepechko@xyratex.com> This looks to have crept in with the port of the patch to RHEL6, which required the code to stop accessing system_utsname directly and instead using the init_utsname() helper to access the structure. That version of the patch was contributed by an external developer, so I can't really say why it was done, probably just an oversight. In our RHEL5 patch it used to be: memcpy(mmp->mmp_nodename, system_utsname.nodename, sizeof(mmp->mmp_nodename)); You can add Acked-by: Andreas Dilger <adilger@dilger.ca>. Thanks for the fix. > --- > fs/ext4/mmp.c | 2 +- > 1 files changed, 1 insertions(+), 1 deletions(-) > > diff --git a/fs/ext4/mmp.c b/fs/ext4/mmp.c > index 9bdef3f..2fca64e 100644 > --- a/fs/ext4/mmp.c > +++ b/fs/ext4/mmp.c > @@ -109,7 +109,7 @@ static int kmmpd(void *data) > mmp->mmp_check_interval = cpu_to_le16(mmp_check_interval); > bdevname(bh->b_bdev, mmp->mmp_bdevname); > > - memcpy(mmp->mmp_nodename, init_utsname()->sysname, > + memcpy(mmp->mmp_nodename, init_utsname()->nodename, > sizeof(mmp->mmp_nodename)); > > while (!kthread_should_stop()) { > -- > 1.7.4.4 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-ext4" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html Cheers, Andreas ^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH 2/2] ext4: MMP: fix error message rate-limiting logic in kmmpd 2011-09-23 0:23 [PATCH 0/2] ext4: Some MMP fixes Nikitas Angelinas 2011-09-23 0:23 ` [PATCH 1/2] ext4: MMP: kmmpd should use nodename from init_uts_ns.name, not sysname Nikitas Angelinas @ 2011-09-23 0:23 ` Nikitas Angelinas 2011-09-23 18:51 ` Andreas Dilger 2011-09-29 23:38 ` (unknown), Nikitas Angelinas 2 siblings, 1 reply; 13+ messages in thread From: Nikitas Angelinas @ 2011-09-23 0:23 UTC (permalink / raw) To: tytso, adilger.kernel, adilger, johann Cc: linux-ext4, linux-kernel, nikitas_angelinas, andrew_perepechko Current logic would print an error message only once, and then 'failed_writes' would stay at 1. Rework the loop to increment 'failed_writes' and print the error message every s_mmp_update_interval * 60 seconds, as intended according to the comment. Perhaps it would be better to reset 'failed_writes' to 0 on every successful write, such that new errors are noticed sooner, but maybe in the interest of efficiency it would be best not to add an operation on every kmmpd thread run? Signed-off-by: Nikitas Angelinas <nikitas_angelinas@xyratex.com> Signed-off-by: Andrew Perepechko <andrew_perepechko@xyratex.com> --- fs/ext4/mmp.c | 5 +++-- 1 files changed, 3 insertions(+), 2 deletions(-) diff --git a/fs/ext4/mmp.c b/fs/ext4/mmp.c index 2fca64e..6b32742 100644 --- a/fs/ext4/mmp.c +++ b/fs/ext4/mmp.c @@ -125,8 +125,9 @@ static int kmmpd(void *data) * Don't spew too many error messages. Print one every * (s_mmp_update_interval * 60) seconds. */ - if (retval && (failed_writes % 60) == 0) { - ext4_error(sb, "Error writing to MMP block"); + if (retval) { + if ((failed_writes % 60) == 0) + ext4_error(sb, "Error writing to MMP block"); failed_writes++; } -- 1.7.4.4 ^ permalink raw reply related [flat|nested] 13+ messages in thread
* Re: [PATCH 2/2] ext4: MMP: fix error message rate-limiting logic in kmmpd 2011-09-23 0:23 ` [PATCH 2/2] ext4: MMP: fix error message rate-limiting logic in kmmpd Nikitas Angelinas @ 2011-09-23 18:51 ` Andreas Dilger 0 siblings, 0 replies; 13+ messages in thread From: Andreas Dilger @ 2011-09-23 18:51 UTC (permalink / raw) To: Theodore Tso, Nikitas Angelinas Cc: Johann Lombardi, Ext4 Developers List, linux-kernel Kernel, Nikitas Angelinas, andrew_perepechko On 2011-09-22, at 6:23 PM, Nikitas Angelinas wrote: > Current logic would print an error message only once, and then > 'failed_writes' would stay at 1. Rework the loop to increment > 'failed_writes' and print the error message every s_mmp_update_interval > * 60 seconds, as intended according to the comment. > > Perhaps it would be better to reset 'failed_writes' to 0 on every > successful write, such that new errors are noticed sooner, but maybe in > the interest of efficiency it would be best not to add an operation on > every kmmpd thread run? > > Signed-off-by: Nikitas Angelinas <nikitas_angelinas@xyratex.com> > Signed-off-by: Andrew Perepechko <andrew_perepechko@xyratex.com> Acked-by: Andreas Dilger <adilger@dilger.ca> Thanks for the fix. > --- > fs/ext4/mmp.c | 5 +++-- > 1 files changed, 3 insertions(+), 2 deletions(-) > > diff --git a/fs/ext4/mmp.c b/fs/ext4/mmp.c > index 2fca64e..6b32742 100644 > --- a/fs/ext4/mmp.c > +++ b/fs/ext4/mmp.c > @@ -125,8 +125,9 @@ static int kmmpd(void *data) > * Don't spew too many error messages. Print one every > * (s_mmp_update_interval * 60) seconds. > */ > - if (retval && (failed_writes % 60) == 0) { > - ext4_error(sb, "Error writing to MMP block"); > + if (retval) { > + if ((failed_writes % 60) == 0) > + ext4_error(sb, "Error writing to MMP block"); > failed_writes++; > } > > -- > 1.7.4.4 > Cheers, Andreas ^ permalink raw reply [flat|nested] 13+ messages in thread
* (no subject) 2011-09-23 0:23 [PATCH 0/2] ext4: Some MMP fixes Nikitas Angelinas @ 2011-09-29 23:38 ` Nikitas Angelinas 2011-09-23 0:23 ` [PATCH 2/2] ext4: MMP: fix error message rate-limiting logic in kmmpd Nikitas Angelinas 2011-09-29 23:38 ` (unknown), Nikitas Angelinas 2 siblings, 0 replies; 13+ messages in thread From: Nikitas Angelinas @ 2011-09-29 23:38 UTC (permalink / raw) To: tytso, adilger.kernel, adilger, johann Cc: linux-ext4, linux-kernel, nikitas_angelinas, andrew_perepechko, nikitasangelinas Same patches with Andreas' acked-by added. ^ permalink raw reply [flat|nested] 13+ messages in thread
* (unknown), @ 2011-09-29 23:38 ` Nikitas Angelinas 0 siblings, 0 replies; 13+ messages in thread From: Nikitas Angelinas @ 2011-09-29 23:38 UTC (permalink / raw) To: tytso, adilger.kernel, adilger, johann Cc: linux-ext4, linux-kernel, nikitas_angelinas, andrew_perepechko, nikitasangelinas Same patches with Andreas' acked-by added. ^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH 1/2] ext4: MMP: kmmpd should use nodename from init_uts_ns.name, not sysname 2011-09-29 23:38 ` (unknown), Nikitas Angelinas (?) @ 2011-09-29 23:38 ` Nikitas Angelinas 2011-10-08 21:22 ` Ted Ts'o -1 siblings, 1 reply; 13+ messages in thread From: Nikitas Angelinas @ 2011-09-29 23:38 UTC (permalink / raw) To: tytso, adilger.kernel, adilger, johann Cc: linux-ext4, linux-kernel, nikitas_angelinas, andrew_perepechko, nikitasangelinas sysname holds "Linux" by default, i.e. what appears when doing a "uname -s"; nodename should be used to print the machine's hostname, i.e. what is returned when doing a "uname -n" or "hostname", and what gethostname(2)/sethostname(2) manipulate, in order to notify the administrator of the node which is contending to mount the filesystem. Signed-off-by: Nikitas Angelinas <nikitas_angelinas@xyratex.com> Signed-off-by: Andrew Perepechko <andrew_perepechko@xyratex.com> Acked-by: Andreas Dilger <adilger@dilger.ca> --- fs/ext4/mmp.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/fs/ext4/mmp.c b/fs/ext4/mmp.c index 9bdef3f..2fca64e 100644 --- a/fs/ext4/mmp.c +++ b/fs/ext4/mmp.c @@ -109,7 +109,7 @@ static int kmmpd(void *data) mmp->mmp_check_interval = cpu_to_le16(mmp_check_interval); bdevname(bh->b_bdev, mmp->mmp_bdevname); - memcpy(mmp->mmp_nodename, init_utsname()->sysname, + memcpy(mmp->mmp_nodename, init_utsname()->nodename, sizeof(mmp->mmp_nodename)); while (!kthread_should_stop()) { -- 1.7.4.4 ^ permalink raw reply related [flat|nested] 13+ messages in thread
* Re: [PATCH 1/2] ext4: MMP: kmmpd should use nodename from init_uts_ns.name, not sysname 2011-09-29 23:38 ` [PATCH 1/2] ext4: MMP: kmmpd should use nodename from init_uts_ns.name, not sysname Nikitas Angelinas @ 2011-10-08 21:22 ` Ted Ts'o 0 siblings, 0 replies; 13+ messages in thread From: Ted Ts'o @ 2011-10-08 21:22 UTC (permalink / raw) To: Nikitas Angelinas Cc: adilger.kernel, adilger, johann, linux-ext4, linux-kernel, nikitas_angelinas, andrew_perepechko On Fri, Sep 30, 2011 at 12:38:19AM +0100, Nikitas Angelinas wrote: > sysname holds "Linux" by default, i.e. what appears when doing a "uname > -s"; nodename should be used to print the machine's hostname, i.e. what > is returned when doing a "uname -n" or "hostname", and what > gethostname(2)/sethostname(2) manipulate, in order to notify the > administrator of the node which is contending to mount the filesystem. > > Signed-off-by: Nikitas Angelinas <nikitas_angelinas@xyratex.com> > Signed-off-by: Andrew Perepechko <andrew_perepechko@xyratex.com> > Acked-by: Andreas Dilger <adilger@dilger.ca> Applied, thanks. - Ted ^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH 2/2] ext4: MMP: fix error message rate-limiting logic in kmmpd 2011-09-29 23:38 ` (unknown), Nikitas Angelinas (?) (?) @ 2011-09-29 23:38 ` Nikitas Angelinas 2011-10-08 21:25 ` Ted Ts'o -1 siblings, 1 reply; 13+ messages in thread From: Nikitas Angelinas @ 2011-09-29 23:38 UTC (permalink / raw) To: tytso, adilger.kernel, adilger, johann Cc: linux-ext4, linux-kernel, nikitas_angelinas, andrew_perepechko, nikitasangelinas Current logic would print an error message only once, and then 'failed_writes' would stay at 1. Rework the loop to increment 'failed_writes' and print the error message every s_mmp_update_interval * 60 seconds, as intended according to the comment. Perhaps it would be better to reset 'failed_writes' to 0 on every successful write, such that new errors are noticed sooner, but maybe in the interest of efficiency it would be best not to add an operation on every kmmpd thread run? Signed-off-by: Nikitas Angelinas <nikitas_angelinas@xyratex.com> Signed-off-by: Andrew Perepechko <andrew_perepechko@xyratex.com> Acked-by: Andreas Dilger <adilger@dilger.ca> --- fs/ext4/mmp.c | 5 +++-- 1 files changed, 3 insertions(+), 2 deletions(-) diff --git a/fs/ext4/mmp.c b/fs/ext4/mmp.c index 2fca64e..6b32742 100644 --- a/fs/ext4/mmp.c +++ b/fs/ext4/mmp.c @@ -125,8 +125,9 @@ static int kmmpd(void *data) * Don't spew too many error messages. Print one every * (s_mmp_update_interval * 60) seconds. */ - if (retval && (failed_writes % 60) == 0) { - ext4_error(sb, "Error writing to MMP block"); + if (retval) { + if ((failed_writes % 60) == 0) + ext4_error(sb, "Error writing to MMP block"); failed_writes++; } -- 1.7.4.4 ^ permalink raw reply related [flat|nested] 13+ messages in thread
* Re: [PATCH 2/2] ext4: MMP: fix error message rate-limiting logic in kmmpd 2011-09-29 23:38 ` [PATCH 2/2] ext4: MMP: fix error message rate-limiting logic in kmmpd Nikitas Angelinas @ 2011-10-08 21:25 ` Ted Ts'o 0 siblings, 0 replies; 13+ messages in thread From: Ted Ts'o @ 2011-10-08 21:25 UTC (permalink / raw) To: Nikitas Angelinas Cc: adilger.kernel, adilger, johann, linux-ext4, linux-kernel, nikitas_angelinas, andrew_perepechko On Fri, Sep 30, 2011 at 12:38:20AM +0100, Nikitas Angelinas wrote: > Current logic would print an error message only once, and then > 'failed_writes' would stay at 1. Rework the loop to increment > 'failed_writes' and print the error message every s_mmp_update_interval > * 60 seconds, as intended according to the comment. > > Perhaps it would be better to reset 'failed_writes' to 0 on every > successful write, such that new errors are noticed sooner, but maybe in > the interest of efficiency it would be best not to add an operation on > every kmmpd thread run? > > Signed-off-by: Nikitas Angelinas <nikitas_angelinas@xyratex.com> > Signed-off-by: Andrew Perepechko <andrew_perepechko@xyratex.com> > Acked-by: Andreas Dilger <adilger@dilger.ca> Thanks, applied. - Ted ^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2011-10-08 21:25 UTC | newest] Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2011-09-23 0:23 [PATCH 0/2] ext4: Some MMP fixes Nikitas Angelinas 2011-09-23 0:23 ` [PATCH 1/2] ext4: MMP: kmmpd should use nodename from init_uts_ns.name, not sysname Nikitas Angelinas 2011-09-23 8:24 ` Andrew Perepechko 2011-09-23 11:30 ` Andrew Perepechko 2011-09-23 18:51 ` Andreas Dilger 2011-09-23 0:23 ` [PATCH 2/2] ext4: MMP: fix error message rate-limiting logic in kmmpd Nikitas Angelinas 2011-09-23 18:51 ` Andreas Dilger 2011-09-29 23:38 ` Nikitas Angelinas 2011-09-29 23:38 ` (unknown), Nikitas Angelinas 2011-09-29 23:38 ` [PATCH 1/2] ext4: MMP: kmmpd should use nodename from init_uts_ns.name, not sysname Nikitas Angelinas 2011-10-08 21:22 ` Ted Ts'o 2011-09-29 23:38 ` [PATCH 2/2] ext4: MMP: fix error message rate-limiting logic in kmmpd Nikitas Angelinas 2011-10-08 21:25 ` Ted Ts'o
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.