All of lore.kernel.org
 help / color / mirror / Atom feed
From: Vishwanath BS <vishwanath.bs@ti.com>
To: linux-omap@vger.kernel.org
Cc: khilman@ti.com, linux-arm-kernel@lists.infradead.org,
	Rajendra Nayak <rnayak@ti.com>,
	Vishwanath BS <vishwanath.bs@ti.com>
Subject: [PATCH 2/4] ARM: OMAP4 PM: Add IO Daisychain support
Date: Tue, 4 Oct 2011 23:22:02 +0530	[thread overview]
Message-ID: <1317750724-32553-3-git-send-email-vishwanath.bs@ti.com> (raw)
In-Reply-To: <1317750724-32553-1-git-send-email-vishwanath.bs@ti.com>

From: Rajendra Nayak <rnayak@ti.com>

patch adds IO Daisychain support for OMAP4 as per section 3.9.4 in OMAP4430
Public TRM.

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Vishwanath BS <vishwanath.bs@ti.com>
---
 arch/arm/mach-omap2/pm.h     |    1 +
 arch/arm/mach-omap2/pm44xx.c |   36 ++++++++++++++++++++++++++++++++++++
 2 files changed, 37 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index 9a36a7c..2e09d72 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -22,6 +22,7 @@ extern int omap3_can_sleep(void);
 extern int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state);
 extern int omap3_idle_init(void);
 extern void omap3_enable_io_chain(void);
+extern void omap4_trigger_wuclk_ctrl(void);
 
 #if defined(CONFIG_PM_OPP)
 extern int omap3_opp_init(void);
diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c
index 59a870b..aa7cff4 100644
--- a/arch/arm/mach-omap2/pm44xx.c
+++ b/arch/arm/mach-omap2/pm44xx.c
@@ -16,8 +16,17 @@
 #include <linux/err.h>
 #include <linux/slab.h>
 
+#include <plat/common.h>
+
 #include "powerdomain.h"
 #include <mach/omap4-common.h>
+#include "pm.h"
+#include "cm-regbits-44xx.h"
+#include "cminst44xx.h"
+#include "prm-regbits-44xx.h"
+#include "prcm44xx.h"
+#include "prm44xx.h"
+#include "prminst44xx.h"
 
 struct power_state {
 	struct powerdomain *pwrdm;
@@ -30,6 +39,33 @@ struct power_state {
 
 static LIST_HEAD(pwrst_list);
 
+#define MAX_IOPAD_LATCH_TIME 1000
+
+void omap4_trigger_wuclk_ctrl(void)
+{
+	int i = 0;
+
+	/* Enable GLOBAL_WUEN */
+	if (!omap4_cminst_read_inst_reg_bits(OMAP4430_PRM_PARTITION,
+			OMAP4430_PRM_DEVICE_INST, OMAP4_PRM_IO_PMCTRL_OFFSET,
+			OMAP4430_GLOBAL_WUEN_MASK))
+		omap4_prminst_rmw_inst_reg_bits(OMAP4430_GLOBAL_WUEN_MASK,
+			OMAP4430_GLOBAL_WUEN_MASK, OMAP4430_PRM_PARTITION,
+			OMAP4430_PRM_DEVICE_INST, OMAP4_PRM_IO_PMCTRL_OFFSET);
+
+	/* Trigger WUCLKIN enable */
+	omap4_prminst_rmw_inst_reg_bits(OMAP4430_WUCLK_CTRL_MASK, OMAP4430_WUCLK_CTRL_MASK,
+		OMAP4430_PRM_PARTITION, OMAP4430_PRM_DEVICE_INST, OMAP4_PRM_IO_PMCTRL_OFFSET);
+	omap_test_timeout(
+		((omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION, OMAP4430_PRM_DEVICE_INST, OMAP4_PRM_IO_PMCTRL_OFFSET)
+		>> OMAP4430_WUCLK_STATUS_SHIFT) == 1),
+		MAX_IOPAD_LATCH_TIME, i);
+	/* Trigger WUCLKIN disable */
+	omap4_prminst_rmw_inst_reg_bits(OMAP4430_WUCLK_CTRL_MASK, 0x0,
+		OMAP4430_PRM_PARTITION, OMAP4430_PRM_DEVICE_INST, OMAP4_PRM_IO_PMCTRL_OFFSET);
+	return;
+}
+
 #ifdef CONFIG_SUSPEND
 static int omap4_pm_suspend(void)
 {
-- 
1.7.0.4


WARNING: multiple messages have this Message-ID (diff)
From: vishwanath.bs@ti.com (Vishwanath BS)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/4] ARM: OMAP4 PM: Add IO Daisychain support
Date: Tue, 4 Oct 2011 23:22:02 +0530	[thread overview]
Message-ID: <1317750724-32553-3-git-send-email-vishwanath.bs@ti.com> (raw)
In-Reply-To: <1317750724-32553-1-git-send-email-vishwanath.bs@ti.com>

From: Rajendra Nayak <rnayak@ti.com>

patch adds IO Daisychain support for OMAP4 as per section 3.9.4 in OMAP4430
Public TRM.

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Vishwanath BS <vishwanath.bs@ti.com>
---
 arch/arm/mach-omap2/pm.h     |    1 +
 arch/arm/mach-omap2/pm44xx.c |   36 ++++++++++++++++++++++++++++++++++++
 2 files changed, 37 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index 9a36a7c..2e09d72 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -22,6 +22,7 @@ extern int omap3_can_sleep(void);
 extern int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state);
 extern int omap3_idle_init(void);
 extern void omap3_enable_io_chain(void);
+extern void omap4_trigger_wuclk_ctrl(void);
 
 #if defined(CONFIG_PM_OPP)
 extern int omap3_opp_init(void);
diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c
index 59a870b..aa7cff4 100644
--- a/arch/arm/mach-omap2/pm44xx.c
+++ b/arch/arm/mach-omap2/pm44xx.c
@@ -16,8 +16,17 @@
 #include <linux/err.h>
 #include <linux/slab.h>
 
+#include <plat/common.h>
+
 #include "powerdomain.h"
 #include <mach/omap4-common.h>
+#include "pm.h"
+#include "cm-regbits-44xx.h"
+#include "cminst44xx.h"
+#include "prm-regbits-44xx.h"
+#include "prcm44xx.h"
+#include "prm44xx.h"
+#include "prminst44xx.h"
 
 struct power_state {
 	struct powerdomain *pwrdm;
@@ -30,6 +39,33 @@ struct power_state {
 
 static LIST_HEAD(pwrst_list);
 
+#define MAX_IOPAD_LATCH_TIME 1000
+
+void omap4_trigger_wuclk_ctrl(void)
+{
+	int i = 0;
+
+	/* Enable GLOBAL_WUEN */
+	if (!omap4_cminst_read_inst_reg_bits(OMAP4430_PRM_PARTITION,
+			OMAP4430_PRM_DEVICE_INST, OMAP4_PRM_IO_PMCTRL_OFFSET,
+			OMAP4430_GLOBAL_WUEN_MASK))
+		omap4_prminst_rmw_inst_reg_bits(OMAP4430_GLOBAL_WUEN_MASK,
+			OMAP4430_GLOBAL_WUEN_MASK, OMAP4430_PRM_PARTITION,
+			OMAP4430_PRM_DEVICE_INST, OMAP4_PRM_IO_PMCTRL_OFFSET);
+
+	/* Trigger WUCLKIN enable */
+	omap4_prminst_rmw_inst_reg_bits(OMAP4430_WUCLK_CTRL_MASK, OMAP4430_WUCLK_CTRL_MASK,
+		OMAP4430_PRM_PARTITION, OMAP4430_PRM_DEVICE_INST, OMAP4_PRM_IO_PMCTRL_OFFSET);
+	omap_test_timeout(
+		((omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION, OMAP4430_PRM_DEVICE_INST, OMAP4_PRM_IO_PMCTRL_OFFSET)
+		>> OMAP4430_WUCLK_STATUS_SHIFT) == 1),
+		MAX_IOPAD_LATCH_TIME, i);
+	/* Trigger WUCLKIN disable */
+	omap4_prminst_rmw_inst_reg_bits(OMAP4430_WUCLK_CTRL_MASK, 0x0,
+		OMAP4430_PRM_PARTITION, OMAP4430_PRM_DEVICE_INST, OMAP4_PRM_IO_PMCTRL_OFFSET);
+	return;
+}
+
 #ifdef CONFIG_SUSPEND
 static int omap4_pm_suspend(void)
 {
-- 
1.7.0.4

  parent reply	other threads:[~2011-10-04 17:59 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-10-04 17:52 [PATCH 0/4] ARM: OMAP3PLUS PM: Add IO Daisychain support via hwmod mux Vishwanath BS
2011-10-04 17:52 ` Vishwanath BS
2011-10-04 17:52 ` [PATCH 1/4] ARM: OMAP3 PM: Fix IO Daisychain sequence Vishwanath BS
2011-10-04 17:52   ` Vishwanath BS
2011-10-04 18:54   ` Tony Lindgren
2011-10-04 18:54     ` Tony Lindgren
2011-10-04 20:47   ` Kevin Hilman
2011-10-04 20:47     ` Kevin Hilman
2011-10-05  4:19     ` Vishwanath Sripathy
2011-10-05  4:19       ` Vishwanath Sripathy
2011-10-07  8:19   ` Paul Walmsley
2011-10-07  8:19     ` Paul Walmsley
2011-10-07 10:04     ` Vishwanath Sripathy
2011-10-07 10:04       ` Vishwanath Sripathy
2011-10-04 17:52 ` Vishwanath BS [this message]
2011-10-04 17:52   ` [PATCH 2/4] ARM: OMAP4 PM: Add IO Daisychain support Vishwanath BS
2011-10-07  8:13   ` Paul Walmsley
2011-10-07  8:13     ` Paul Walmsley
2011-10-07 10:03     ` Vishwanath Sripathy
2011-10-07 10:03       ` Vishwanath Sripathy
2011-10-04 17:52 ` [PATCH 3/4] ARM: OMAP3 PM: Enable IO Wake up Vishwanath BS
2011-10-04 17:52   ` Vishwanath BS
2011-10-04 17:52 ` [PATCH 4/4] ARM: OMAP3PLUS PM: Add IO Daisychain support via hwmod mux Vishwanath BS
2011-10-04 17:52   ` Vishwanath BS

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1317750724-32553-3-git-send-email-vishwanath.bs@ti.com \
    --to=vishwanath.bs@ti.com \
    --cc=khilman@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=rnayak@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.