* [PATCH] mmc mxcmmc: fix falling back to PIO
@ 2011-11-11 15:28 ` Sascha Hauer
0 siblings, 0 replies; 8+ messages in thread
From: Sascha Hauer @ 2011-11-11 15:28 UTC (permalink / raw)
To: linux-arm-kernel; +Cc: Sascha Hauer, Chris Ball, linux-mmc
When we can't configure the dma channel we want to fall
back to PIO. We do this by setting host->do_dma to zero.
This does not work as do_dma is used to see whether dma
can be used for the current transfer. Instead, we have
to set host->dma to NULL.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Chris Ball <cjb@laptop.org>
Cc: linux-mmc@vger.kernel.org
---
drivers/mmc/host/mxcmmc.c | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
index 14aa213..b87143d 100644
--- a/drivers/mmc/host/mxcmmc.c
+++ b/drivers/mmc/host/mxcmmc.c
@@ -731,6 +731,7 @@ static void mxcmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
"failed to config DMA channel. Falling back to PIO\n");
dma_release_channel(host->dma);
host->do_dma = 0;
+ host->dma = NULL;
}
}
--
1.7.7.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH] mmc mxcmmc: fix falling back to PIO
@ 2011-11-11 15:28 ` Sascha Hauer
0 siblings, 0 replies; 8+ messages in thread
From: Sascha Hauer @ 2011-11-11 15:28 UTC (permalink / raw)
To: linux-arm-kernel
When we can't configure the dma channel we want to fall
back to PIO. We do this by setting host->do_dma to zero.
This does not work as do_dma is used to see whether dma
can be used for the current transfer. Instead, we have
to set host->dma to NULL.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Chris Ball <cjb@laptop.org>
Cc: linux-mmc at vger.kernel.org
---
drivers/mmc/host/mxcmmc.c | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
index 14aa213..b87143d 100644
--- a/drivers/mmc/host/mxcmmc.c
+++ b/drivers/mmc/host/mxcmmc.c
@@ -731,6 +731,7 @@ static void mxcmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
"failed to config DMA channel. Falling back to PIO\n");
dma_release_channel(host->dma);
host->do_dma = 0;
+ host->dma = NULL;
}
}
--
1.7.7.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH] mmc mxcmmc: fix falling back to PIO
2011-11-11 15:28 ` Sascha Hauer
@ 2011-11-11 16:13 ` Chris Ball
-1 siblings, 0 replies; 8+ messages in thread
From: Chris Ball @ 2011-11-11 16:13 UTC (permalink / raw)
To: Sascha Hauer; +Cc: linux-arm-kernel, linux-mmc
Hi Sascha,
On Fri, Nov 11 2011, Sascha Hauer wrote:
> When we can't configure the dma channel we want to fall
> back to PIO. We do this by setting host->do_dma to zero.
> This does not work as do_dma is used to see whether dma
> can be used for the current transfer. Instead, we have
> to set host->dma to NULL.
>
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> Cc: Chris Ball <cjb@laptop.org>
> Cc: linux-mmc@vger.kernel.org
> ---
> drivers/mmc/host/mxcmmc.c | 1 +
> 1 files changed, 1 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
> index 14aa213..b87143d 100644
> --- a/drivers/mmc/host/mxcmmc.c
> +++ b/drivers/mmc/host/mxcmmc.c
> @@ -731,6 +731,7 @@ static void mxcmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> "failed to config DMA channel. Falling back to PIO\n");
> dma_release_channel(host->dma);
> host->do_dma = 0;
> + host->dma = NULL;
> }
> }
Thanks, pushed to mmc-next for 3.2 with a stable@ tag added.
- Chris.
--
Chris Ball <cjb@laptop.org> <http://printf.net/>
One Laptop Per Child
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH] mmc mxcmmc: fix falling back to PIO
@ 2011-11-11 16:13 ` Chris Ball
0 siblings, 0 replies; 8+ messages in thread
From: Chris Ball @ 2011-11-11 16:13 UTC (permalink / raw)
To: linux-arm-kernel
Hi Sascha,
On Fri, Nov 11 2011, Sascha Hauer wrote:
> When we can't configure the dma channel we want to fall
> back to PIO. We do this by setting host->do_dma to zero.
> This does not work as do_dma is used to see whether dma
> can be used for the current transfer. Instead, we have
> to set host->dma to NULL.
>
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> Cc: Chris Ball <cjb@laptop.org>
> Cc: linux-mmc at vger.kernel.org
> ---
> drivers/mmc/host/mxcmmc.c | 1 +
> 1 files changed, 1 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
> index 14aa213..b87143d 100644
> --- a/drivers/mmc/host/mxcmmc.c
> +++ b/drivers/mmc/host/mxcmmc.c
> @@ -731,6 +731,7 @@ static void mxcmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> "failed to config DMA channel. Falling back to PIO\n");
> dma_release_channel(host->dma);
> host->do_dma = 0;
> + host->dma = NULL;
> }
> }
Thanks, pushed to mmc-next for 3.2 with a stable@ tag added.
- Chris.
--
Chris Ball <cjb@laptop.org> <http://printf.net/>
One Laptop Per Child
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH] mmc mxcmmc: fix falling back to PIO
@ 2011-08-25 9:06 ` Sascha Hauer
0 siblings, 0 replies; 8+ messages in thread
From: Sascha Hauer @ 2011-08-25 9:06 UTC (permalink / raw)
To: linux-arm-kernel; +Cc: Sascha Hauer, Chris Ball, linux-mmc
When we can't configure the dma channel we want to fall
back to PIO. We do this by setting host->do_dma to zero.
This does not work as do_dma is used to see whether dma
can be used for the current transfer. Instead, we have
to set host->dma to NULL.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Chris Ball <cjb@laptop.org>
Cc: linux-mmc@vger.kernel.org
---
drivers/mmc/host/mxcmmc.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
index 14aa213..b050b2a 100644
--- a/drivers/mmc/host/mxcmmc.c
+++ b/drivers/mmc/host/mxcmmc.c
@@ -730,7 +730,7 @@ static void mxcmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
dev_err(mmc_dev(host->mmc),
"failed to config DMA channel. Falling back to PIO\n");
dma_release_channel(host->dma);
- host->do_dma = 0;
+ host->dma = NULL;
}
}
--
1.7.5.4
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH] mmc mxcmmc: fix falling back to PIO
@ 2011-08-25 9:06 ` Sascha Hauer
0 siblings, 0 replies; 8+ messages in thread
From: Sascha Hauer @ 2011-08-25 9:06 UTC (permalink / raw)
To: linux-arm-kernel
When we can't configure the dma channel we want to fall
back to PIO. We do this by setting host->do_dma to zero.
This does not work as do_dma is used to see whether dma
can be used for the current transfer. Instead, we have
to set host->dma to NULL.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Chris Ball <cjb@laptop.org>
Cc: linux-mmc at vger.kernel.org
---
drivers/mmc/host/mxcmmc.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
index 14aa213..b050b2a 100644
--- a/drivers/mmc/host/mxcmmc.c
+++ b/drivers/mmc/host/mxcmmc.c
@@ -730,7 +730,7 @@ static void mxcmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
dev_err(mmc_dev(host->mmc),
"failed to config DMA channel. Falling back to PIO\n");
dma_release_channel(host->dma);
- host->do_dma = 0;
+ host->dma = NULL;
}
}
--
1.7.5.4
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH] mmc mxcmmc: fix falling back to PIO
2011-08-25 9:06 ` Sascha Hauer
@ 2011-08-25 9:31 ` Sascha Hauer
-1 siblings, 0 replies; 8+ messages in thread
From: Sascha Hauer @ 2011-08-25 9:31 UTC (permalink / raw)
To: linux-arm-kernel; +Cc: Chris Ball, linux-mmc
On Thu, Aug 25, 2011 at 11:06:12AM +0200, Sascha Hauer wrote:
> When we can't configure the dma channel we want to fall
> back to PIO. We do this by setting host->do_dma to zero.
> This does not work as do_dma is used to see whether dma
> can be used for the current transfer. Instead, we have
> to set host->dma to NULL.
Sorry, forget this patch. We have to set host->do_dma to 0
also. Will send an updated patch.
Sascha
>
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> Cc: Chris Ball <cjb@laptop.org>
> Cc: linux-mmc@vger.kernel.org
> ---
> drivers/mmc/host/mxcmmc.c | 2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
> index 14aa213..b050b2a 100644
> --- a/drivers/mmc/host/mxcmmc.c
> +++ b/drivers/mmc/host/mxcmmc.c
> @@ -730,7 +730,7 @@ static void mxcmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> dev_err(mmc_dev(host->mmc),
> "failed to config DMA channel. Falling back to PIO\n");
> dma_release_channel(host->dma);
> - host->do_dma = 0;
> + host->dma = NULL;
> }
> }
>
> --
> 1.7.5.4
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH] mmc mxcmmc: fix falling back to PIO
@ 2011-08-25 9:31 ` Sascha Hauer
0 siblings, 0 replies; 8+ messages in thread
From: Sascha Hauer @ 2011-08-25 9:31 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Aug 25, 2011 at 11:06:12AM +0200, Sascha Hauer wrote:
> When we can't configure the dma channel we want to fall
> back to PIO. We do this by setting host->do_dma to zero.
> This does not work as do_dma is used to see whether dma
> can be used for the current transfer. Instead, we have
> to set host->dma to NULL.
Sorry, forget this patch. We have to set host->do_dma to 0
also. Will send an updated patch.
Sascha
>
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> Cc: Chris Ball <cjb@laptop.org>
> Cc: linux-mmc at vger.kernel.org
> ---
> drivers/mmc/host/mxcmmc.c | 2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
> index 14aa213..b050b2a 100644
> --- a/drivers/mmc/host/mxcmmc.c
> +++ b/drivers/mmc/host/mxcmmc.c
> @@ -730,7 +730,7 @@ static void mxcmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> dev_err(mmc_dev(host->mmc),
> "failed to config DMA channel. Falling back to PIO\n");
> dma_release_channel(host->dma);
> - host->do_dma = 0;
> + host->dma = NULL;
> }
> }
>
> --
> 1.7.5.4
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2011-11-11 16:13 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-11-11 15:28 [PATCH] mmc mxcmmc: fix falling back to PIO Sascha Hauer
2011-11-11 15:28 ` Sascha Hauer
2011-11-11 16:13 ` Chris Ball
2011-11-11 16:13 ` Chris Ball
-- strict thread matches above, loose matches on Subject: below --
2011-08-25 9:06 Sascha Hauer
2011-08-25 9:06 ` Sascha Hauer
2011-08-25 9:31 ` Sascha Hauer
2011-08-25 9:31 ` Sascha Hauer
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.