From: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
To: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: "Samuel Ortiz" <sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>,
"Sascha Hauer" <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
"Mark Brown"
<broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>,
"Uwe Kleine-König"
<u.kleine-koenig-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
"Liam Girdwood" <lrg-l0cyMroinI0@public.gmane.org>
Subject: [PATCH v3 3/3] arm/imx: add mc13892 support into imx51-babbage.dts
Date: Mon, 12 Dec 2011 23:15:58 +0800 [thread overview]
Message-ID: <1323702958-4831-4-git-send-email-shawn.guo@linaro.org> (raw)
In-Reply-To: <1323702958-4831-1-git-send-email-shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
It adds mc13892 support into imx51-babbage device tree source.
Signed-off-by: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
arch/arm/boot/dts/imx51-babbage.dts | 103 ++++++++++++++++++++++++++++++++++-
1 files changed, 101 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index f8766af..407fc0b 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -31,12 +31,14 @@
esdhc@70004000 { /* ESDHC1 */
fsl,cd-internal;
fsl,wp-internal;
+ vmmc-supply = <&vsd_reg>;
status = "okay";
};
esdhc@70008000 { /* ESDHC2 */
cd-gpios = <&gpio0 6 0>; /* GPIO1_6 */
wp-gpios = <&gpio0 5 0>; /* GPIO1_5 */
+ vmmc-supply = <&vsd_reg>;
status = "okay";
};
@@ -57,8 +59,105 @@
compatible = "fsl,mc13892";
spi-max-frequency = <6000000>;
reg = <0>;
- mc13xxx-irq-gpios = <&gpio0 8 0>; /* GPIO1_8 */
- fsl,mc13xxx-uses-regulator;
+ interrupt-parent = <&gpio0>;
+ interrupts = <8>;
+
+ regulators {
+ sw1_reg: mc13892__sw1 {
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1375000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw2_reg: mc13892__sw2 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3_reg: mc13892__sw3 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw4_reg: mc13892__sw4 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ viohi_reg: mc13892__viohi {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vpll_reg: mc13892__vpll {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vdig_reg: mc13892__vdig {
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <1650000>;
+ regulator-boot-on;
+ };
+
+ vsd_reg: mc13892__vsd {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3150000>;
+ };
+
+ vusb2_reg: mc13892__vusb2 {
+ regulator-min-microvolt = <2400000>;
+ regulator-max-microvolt = <2775000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vvideo_reg: mc13892__vvideo {
+ regulator-min-microvolt = <2775000>;
+ regulator-max-microvolt = <2775000>;
+ };
+
+ vaudio_reg: mc13892__vaudio {
+ regulator-min-microvolt = <2300000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ vcam_reg: mc13892__vcam {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ vgen1_reg: mc13892__vgen1 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ vgen2_reg: mc13892__vgen2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3150000>;
+ regulator-always-on;
+ };
+
+ vgen3_reg: mc13892__vgen3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-always-on;
+ };
+
+ vusb_reg: mc13892__vusb {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
};
flash: at45db321d@1 {
--
1.7.4.1
WARNING: multiple messages have this Message-ID (diff)
From: shawn.guo@linaro.org (Shawn Guo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 3/3] arm/imx: add mc13892 support into imx51-babbage.dts
Date: Mon, 12 Dec 2011 23:15:58 +0800 [thread overview]
Message-ID: <1323702958-4831-4-git-send-email-shawn.guo@linaro.org> (raw)
In-Reply-To: <1323702958-4831-1-git-send-email-shawn.guo@linaro.org>
It adds mc13892 support into imx51-babbage device tree source.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/boot/dts/imx51-babbage.dts | 103 ++++++++++++++++++++++++++++++++++-
1 files changed, 101 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index f8766af..407fc0b 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -31,12 +31,14 @@
esdhc at 70004000 { /* ESDHC1 */
fsl,cd-internal;
fsl,wp-internal;
+ vmmc-supply = <&vsd_reg>;
status = "okay";
};
esdhc at 70008000 { /* ESDHC2 */
cd-gpios = <&gpio0 6 0>; /* GPIO1_6 */
wp-gpios = <&gpio0 5 0>; /* GPIO1_5 */
+ vmmc-supply = <&vsd_reg>;
status = "okay";
};
@@ -57,8 +59,105 @@
compatible = "fsl,mc13892";
spi-max-frequency = <6000000>;
reg = <0>;
- mc13xxx-irq-gpios = <&gpio0 8 0>; /* GPIO1_8 */
- fsl,mc13xxx-uses-regulator;
+ interrupt-parent = <&gpio0>;
+ interrupts = <8>;
+
+ regulators {
+ sw1_reg: mc13892__sw1 {
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1375000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw2_reg: mc13892__sw2 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3_reg: mc13892__sw3 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw4_reg: mc13892__sw4 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ viohi_reg: mc13892__viohi {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vpll_reg: mc13892__vpll {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vdig_reg: mc13892__vdig {
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <1650000>;
+ regulator-boot-on;
+ };
+
+ vsd_reg: mc13892__vsd {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3150000>;
+ };
+
+ vusb2_reg: mc13892__vusb2 {
+ regulator-min-microvolt = <2400000>;
+ regulator-max-microvolt = <2775000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vvideo_reg: mc13892__vvideo {
+ regulator-min-microvolt = <2775000>;
+ regulator-max-microvolt = <2775000>;
+ };
+
+ vaudio_reg: mc13892__vaudio {
+ regulator-min-microvolt = <2300000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ vcam_reg: mc13892__vcam {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ vgen1_reg: mc13892__vgen1 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ vgen2_reg: mc13892__vgen2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3150000>;
+ regulator-always-on;
+ };
+
+ vgen3_reg: mc13892__vgen3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-always-on;
+ };
+
+ vusb_reg: mc13892__vusb {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
};
flash: at45db321d at 1 {
--
1.7.4.1
next prev parent reply other threads:[~2011-12-12 15:15 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-12 15:15 [PATCH v3 0/3] Add device tree support for mc13892 regulator driver Shawn Guo
2011-12-12 15:15 ` Shawn Guo
[not found] ` <1323702958-4831-1-git-send-email-shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2011-12-12 15:15 ` [PATCH v3 1/3] mfd: mc13xxx: add device tree probe support Shawn Guo
2011-12-12 15:15 ` Shawn Guo
[not found] ` <1323702958-4831-2-git-send-email-shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2011-12-20 0:57 ` Mark Brown
2011-12-20 0:57 ` Mark Brown
[not found] ` <20111220005708.GM2860-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
2011-12-20 2:01 ` Shawn Guo
2011-12-20 2:01 ` Shawn Guo
[not found] ` <20111220020101.GD5683-+NayF8gZjK2ctlrPMvKcciBecyulp+rMXqFh9Ls21Oc@public.gmane.org>
2011-12-20 1:59 ` Mark Brown
2011-12-20 1:59 ` Mark Brown
[not found] ` <20111220015931.GX2860-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
2011-12-20 3:03 ` Shawn Guo
2011-12-20 3:03 ` Shawn Guo
2011-12-20 11:25 ` Mark Brown
2011-12-20 11:25 ` Mark Brown
[not found] ` <20111220112510.GL2866-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
2011-12-20 13:52 ` Shawn Guo
2011-12-20 13:52 ` Shawn Guo
[not found] ` <20111220135251.GB5129-rvtDTF3kK1ictlrPMvKcciBecyulp+rMXqFh9Ls21Oc@public.gmane.org>
2011-12-20 14:35 ` Mark Brown
2011-12-20 14:35 ` Mark Brown
[not found] ` <20111220143558.GT2866-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
2011-12-20 15:31 ` Shawn Guo
2011-12-20 15:31 ` Shawn Guo
[not found] ` <20111220153101.GD5348-rvtDTF3kK1ictlrPMvKcciBecyulp+rMXqFh9Ls21Oc@public.gmane.org>
2011-12-20 23:25 ` Mark Brown
2011-12-20 23:25 ` Mark Brown
[not found] ` <20111220232526.GA6551-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
2011-12-21 1:25 ` Shawn Guo
2011-12-21 1:25 ` Shawn Guo
2011-12-21 1:37 ` Mark Brown
2011-12-21 1:37 ` Mark Brown
[not found] ` <20111221013702.GB15398-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
2011-12-21 2:12 ` Shawn Guo
2011-12-21 2:12 ` Shawn Guo
2011-12-12 15:15 ` [PATCH v3 2/3] regulator: mc13892: " Shawn Guo
2011-12-12 15:15 ` Shawn Guo
[not found] ` <1323702958-4831-3-git-send-email-shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2011-12-19 14:07 ` Shawn Guo
2011-12-19 14:07 ` Shawn Guo
[not found] ` <20111219140730.GB5257-+NayF8gZjK2ctlrPMvKcciBecyulp+rMXqFh9Ls21Oc@public.gmane.org>
2011-12-20 0:54 ` Mark Brown
2011-12-20 0:54 ` Mark Brown
[not found] ` <20111220005414.GL2860-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
2011-12-20 1:37 ` Shawn Guo
2011-12-20 1:37 ` Shawn Guo
[not found] ` <20111220013711.GC5683-+NayF8gZjK2ctlrPMvKcciBecyulp+rMXqFh9Ls21Oc@public.gmane.org>
2011-12-20 1:34 ` Mark Brown
2011-12-20 1:34 ` Mark Brown
[not found] ` <20111220013425.GU2860-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
2011-12-20 2:02 ` Shawn Guo
2011-12-20 2:02 ` Shawn Guo
2011-12-12 15:15 ` Shawn Guo [this message]
2011-12-12 15:15 ` [PATCH v3 3/3] arm/imx: add mc13892 support into imx51-babbage.dts Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1323702958-4831-4-git-send-email-shawn.guo@linaro.org \
--to=shawn.guo-qsej5fyqhm4dnm+yrofe0a@public.gmane.org \
--cc=broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org \
--cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=lrg-l0cyMroinI0@public.gmane.org \
--cc=s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \
--cc=u.kleine-koenig-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.