All of lore.kernel.org
 help / color / mirror / Atom feed
From: Thierry Reding <thierry.reding-RM9K5IK7kjKj5M59NBduVrNAH6kLmebB@public.gmane.org>
To: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
	Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>,
	Matthias Kaehlcke
	<matthias-RprLehDfhQ3k1uMJSBkQmQ@public.gmane.org>,
	Kurt Van Dijck <kurt.van.dijck-/BeEPy95v10@public.gmane.org>,
	Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>,
	Grant Likely
	<grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>,
	Colin Cross <ccross-z5hGa2qSFaRBDgjK7y7TUQ@public.gmane.org>,
	Olof Johansson <olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org>,
	Richard Purdie <rpurdie-Fm38FmjxZ/leoWH0uzbU5w@public.gmane.org>,
	Mark Brown
	<broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>,
	Mitch Bradley <wmb-D5eQfiDGL7eakBO8gow8eQ@public.gmane.org>,
	Mike Frysinger <vapier-aBrp7R+bbdUdnm+yROfE0A@public.gmane.org>,
	Eric Miao <eric.y.miao-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Subject: [PATCH v2 09/10] pwm: Add PXA support
Date: Mon,  6 Feb 2012 16:19:44 +0100	[thread overview]
Message-ID: <1328541585-24642-10-git-send-email-thierry.reding@avionic-design.de> (raw)
In-Reply-To: <1328541585-24642-1-git-send-email-thierry.reding-RM9K5IK7kjKj5M59NBduVrNAH6kLmebB@public.gmane.org>

Signed-off-by: Thierry Reding <thierry.reding-RM9K5IK7kjKj5M59NBduVrNAH6kLmebB@public.gmane.org>
---
 arch/arm/plat-pxa/Makefile |    1 -
 arch/arm/plat-pxa/pwm.c    |  304 --------------------------------------------
 drivers/pwm/Kconfig        |    9 ++
 drivers/pwm/Makefile       |    1 +
 drivers/pwm/pwm-pxa.c      |  243 +++++++++++++++++++++++++++++++++++
 5 files changed, 253 insertions(+), 305 deletions(-)
 delete mode 100644 arch/arm/plat-pxa/pwm.c
 create mode 100644 drivers/pwm/pwm-pxa.c

diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile
index f302d04..af8e484 100644
--- a/arch/arm/plat-pxa/Makefile
+++ b/arch/arm/plat-pxa/Makefile
@@ -8,5 +8,4 @@ obj-$(CONFIG_PXA3xx)		+= mfp.o
 obj-$(CONFIG_PXA95x)		+= mfp.o
 obj-$(CONFIG_ARCH_MMP)		+= mfp.o
 
-obj-$(CONFIG_HAVE_PWM)		+= pwm.o
 obj-$(CONFIG_PXA_SSP)		+= ssp.o
diff --git a/arch/arm/plat-pxa/pwm.c b/arch/arm/plat-pxa/pwm.c
deleted file mode 100644
index ef32686..0000000
--- a/arch/arm/plat-pxa/pwm.c
+++ /dev/null
@@ -1,304 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/pwm.c
- *
- * simple driver for PWM (Pulse Width Modulator) controller
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * 2008-02-13	initial version
- * 		eric miao <eric.miao-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org>
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/pwm.h>
-
-#include <asm/div64.h>
-
-#define HAS_SECONDARY_PWM	0x10
-#define PWM_ID_BASE(d)		((d) & 0xf)
-
-static const struct platform_device_id pwm_id_table[] = {
-	/*   PWM    has_secondary_pwm? */
-	{ "pxa25x-pwm", 0 },
-	{ "pxa27x-pwm", 0 | HAS_SECONDARY_PWM },
-	{ "pxa168-pwm", 1 },
-	{ "pxa910-pwm", 1 },
-	{ },
-};
-MODULE_DEVICE_TABLE(platform, pwm_id_table);
-
-/* PWM registers and bits definitions */
-#define PWMCR		(0x00)
-#define PWMDCR		(0x04)
-#define PWMPCR		(0x08)
-
-#define PWMCR_SD	(1 << 6)
-#define PWMDCR_FD	(1 << 10)
-
-struct pwm_device {
-	struct list_head	node;
-	struct pwm_device	*secondary;
-	struct platform_device	*pdev;
-
-	const char	*label;
-	struct clk	*clk;
-	int		clk_enabled;
-	void __iomem	*mmio_base;
-
-	unsigned int	use_count;
-	unsigned int	pwm_id;
-};
-
-/*
- * period_ns = 10^9 * (PRESCALE + 1) * (PV + 1) / PWM_CLK_RATE
- * duty_ns   = 10^9 * (PRESCALE + 1) * DC / PWM_CLK_RATE
- */
-int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
-{
-	unsigned long long c;
-	unsigned long period_cycles, prescale, pv, dc;
-
-	if (pwm == NULL || period_ns == 0 || duty_ns > period_ns)
-		return -EINVAL;
-
-	c = clk_get_rate(pwm->clk);
-	c = c * period_ns;
-	do_div(c, 1000000000);
-	period_cycles = c;
-
-	if (period_cycles < 1)
-		period_cycles = 1;
-	prescale = (period_cycles - 1) / 1024;
-	pv = period_cycles / (prescale + 1) - 1;
-
-	if (prescale > 63)
-		return -EINVAL;
-
-	if (duty_ns == period_ns)
-		dc = PWMDCR_FD;
-	else
-		dc = (pv + 1) * duty_ns / period_ns;
-
-	/* NOTE: the clock to PWM has to be enabled first
-	 * before writing to the registers
-	 */
-	clk_enable(pwm->clk);
-	__raw_writel(prescale, pwm->mmio_base + PWMCR);
-	__raw_writel(dc, pwm->mmio_base + PWMDCR);
-	__raw_writel(pv, pwm->mmio_base + PWMPCR);
-	clk_disable(pwm->clk);
-
-	return 0;
-}
-EXPORT_SYMBOL(pwm_config);
-
-int pwm_enable(struct pwm_device *pwm)
-{
-	int rc = 0;
-
-	if (!pwm->clk_enabled) {
-		rc = clk_enable(pwm->clk);
-		if (!rc)
-			pwm->clk_enabled = 1;
-	}
-	return rc;
-}
-EXPORT_SYMBOL(pwm_enable);
-
-void pwm_disable(struct pwm_device *pwm)
-{
-	if (pwm->clk_enabled) {
-		clk_disable(pwm->clk);
-		pwm->clk_enabled = 0;
-	}
-}
-EXPORT_SYMBOL(pwm_disable);
-
-static DEFINE_MUTEX(pwm_lock);
-static LIST_HEAD(pwm_list);
-
-struct pwm_device *pwm_request(int pwm_id, const char *label)
-{
-	struct pwm_device *pwm;
-	int found = 0;
-
-	mutex_lock(&pwm_lock);
-
-	list_for_each_entry(pwm, &pwm_list, node) {
-		if (pwm->pwm_id == pwm_id) {
-			found = 1;
-			break;
-		}
-	}
-
-	if (found) {
-		if (pwm->use_count == 0) {
-			pwm->use_count++;
-			pwm->label = label;
-		} else
-			pwm = ERR_PTR(-EBUSY);
-	} else
-		pwm = ERR_PTR(-ENOENT);
-
-	mutex_unlock(&pwm_lock);
-	return pwm;
-}
-EXPORT_SYMBOL(pwm_request);
-
-void pwm_free(struct pwm_device *pwm)
-{
-	mutex_lock(&pwm_lock);
-
-	if (pwm->use_count) {
-		pwm->use_count--;
-		pwm->label = NULL;
-	} else
-		pr_warning("PWM device already freed\n");
-
-	mutex_unlock(&pwm_lock);
-}
-EXPORT_SYMBOL(pwm_free);
-
-static inline void __add_pwm(struct pwm_device *pwm)
-{
-	mutex_lock(&pwm_lock);
-	list_add_tail(&pwm->node, &pwm_list);
-	mutex_unlock(&pwm_lock);
-}
-
-static int __devinit pwm_probe(struct platform_device *pdev)
-{
-	const struct platform_device_id *id = platform_get_device_id(pdev);
-	struct pwm_device *pwm, *secondary = NULL;
-	struct resource *r;
-	int ret = 0;
-
-	pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL);
-	if (pwm == NULL) {
-		dev_err(&pdev->dev, "failed to allocate memory\n");
-		return -ENOMEM;
-	}
-
-	pwm->clk = clk_get(&pdev->dev, NULL);
-	if (IS_ERR(pwm->clk)) {
-		ret = PTR_ERR(pwm->clk);
-		goto err_free;
-	}
-	pwm->clk_enabled = 0;
-
-	pwm->use_count = 0;
-	pwm->pwm_id = PWM_ID_BASE(id->driver_data) + pdev->id;
-	pwm->pdev = pdev;
-
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (r == NULL) {
-		dev_err(&pdev->dev, "no memory resource defined\n");
-		ret = -ENODEV;
-		goto err_free_clk;
-	}
-
-	r = request_mem_region(r->start, resource_size(r), pdev->name);
-	if (r == NULL) {
-		dev_err(&pdev->dev, "failed to request memory resource\n");
-		ret = -EBUSY;
-		goto err_free_clk;
-	}
-
-	pwm->mmio_base = ioremap(r->start, resource_size(r));
-	if (pwm->mmio_base == NULL) {
-		dev_err(&pdev->dev, "failed to ioremap() registers\n");
-		ret = -ENODEV;
-		goto err_free_mem;
-	}
-
-	if (id->driver_data & HAS_SECONDARY_PWM) {
-		secondary = kzalloc(sizeof(struct pwm_device), GFP_KERNEL);
-		if (secondary == NULL) {
-			ret = -ENOMEM;
-			goto err_free_mem;
-		}
-
-		*secondary = *pwm;
-		pwm->secondary = secondary;
-
-		/* registers for the second PWM has offset of 0x10 */
-		secondary->mmio_base = pwm->mmio_base + 0x10;
-		secondary->pwm_id = pdev->id + 2;
-	}
-
-	__add_pwm(pwm);
-	if (secondary)
-		__add_pwm(secondary);
-
-	platform_set_drvdata(pdev, pwm);
-	return 0;
-
-err_free_mem:
-	release_mem_region(r->start, resource_size(r));
-err_free_clk:
-	clk_put(pwm->clk);
-err_free:
-	kfree(pwm);
-	return ret;
-}
-
-static int __devexit pwm_remove(struct platform_device *pdev)
-{
-	struct pwm_device *pwm;
-	struct resource *r;
-
-	pwm = platform_get_drvdata(pdev);
-	if (pwm == NULL)
-		return -ENODEV;
-
-	mutex_lock(&pwm_lock);
-
-	if (pwm->secondary) {
-		list_del(&pwm->secondary->node);
-		kfree(pwm->secondary);
-	}
-
-	list_del(&pwm->node);
-	mutex_unlock(&pwm_lock);
-
-	iounmap(pwm->mmio_base);
-
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(r->start, resource_size(r));
-
-	clk_put(pwm->clk);
-	kfree(pwm);
-	return 0;
-}
-
-static struct platform_driver pwm_driver = {
-	.driver		= {
-		.name	= "pxa25x-pwm",
-		.owner	= THIS_MODULE,
-	},
-	.probe		= pwm_probe,
-	.remove		= __devexit_p(pwm_remove),
-	.id_table	= pwm_id_table,
-};
-
-static int __init pwm_init(void)
-{
-	return platform_driver_register(&pwm_driver);
-}
-arch_initcall(pwm_init);
-
-static void __exit pwm_exit(void)
-{
-	platform_driver_unregister(&pwm_driver);
-}
-module_exit(pwm_exit);
-
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index eb54042..0ef4f30 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -18,6 +18,15 @@ config PWM_BFIN
 	  To compile this driver as a module, choose M here: the module
 	  will be called pwm-bfin.
 
+config PWM_PXA
+	tristate "PXA PWM support"
+	depends on ARCH_PXA
+	help
+	  Generic PWM framework driver for PXA.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-pxa.
+
 config PWM_TEGRA
 	tristate "NVIDIA Tegra PWM support"
 	depends on ARCH_TEGRA
diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
index 251b8d2..e859c51 100644
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
@@ -1,3 +1,4 @@
 obj-$(CONFIG_PWM)		+= core.o
 obj-$(CONFIG_PWM_BFIN)		+= pwm-bfin.o
+obj-$(CONFIG_PWM_PXA)		+= pwm-pxa.o
 obj-$(CONFIG_PWM_TEGRA)		+= pwm-tegra.o
diff --git a/drivers/pwm/pwm-pxa.c b/drivers/pwm/pwm-pxa.c
new file mode 100644
index 0000000..6434b18
--- /dev/null
+++ b/drivers/pwm/pwm-pxa.c
@@ -0,0 +1,243 @@
+/*
+ * linux/arch/arm/mach-pxa/pwm.c
+ *
+ * simple driver for PWM (Pulse Width Modulator) controller
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * 2008-02-13	initial version
+ * 		eric miao <eric.miao-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/pwm.h>
+
+#include <asm/div64.h>
+
+#define HAS_SECONDARY_PWM	0x10
+#define PWM_ID_BASE(d)		((d) & 0xf)
+
+static const struct platform_device_id pwm_id_table[] = {
+	/*   PWM    has_secondary_pwm? */
+	{ "pxa25x-pwm", 0 },
+	{ "pxa27x-pwm", 0 | HAS_SECONDARY_PWM },
+	{ "pxa168-pwm", 1 },
+	{ "pxa910-pwm", 1 },
+	{ },
+};
+MODULE_DEVICE_TABLE(platform, pwm_id_table);
+
+/* PWM registers and bits definitions */
+#define PWMCR		(0x00)
+#define PWMDCR		(0x04)
+#define PWMPCR		(0x08)
+
+#define PWMCR_SD	(1 << 6)
+#define PWMDCR_FD	(1 << 10)
+
+struct pxa_pwm_chip {
+	struct pwm_chip	chip;
+	struct device	*dev;
+
+	struct clk	*clk;
+	int		clk_enabled;
+	void __iomem	*mmio_base;
+};
+
+static inline struct pxa_pwm_chip *to_pxa_pwm_chip(struct pwm_chip *chip)
+{
+	return container_of(chip, struct pxa_pwm_chip, chip);
+}
+
+/*
+ * period_ns = 10^9 * (PRESCALE + 1) * (PV + 1) / PWM_CLK_RATE
+ * duty_ns   = 10^9 * (PRESCALE + 1) * DC / PWM_CLK_RATE
+ */
+static int pxa_pwm_config(struct pwm_chip *chip, unsigned int pwm, int duty_ns, int period_ns)
+{
+	struct pxa_pwm_chip *pc = to_pxa_pwm_chip(chip);
+	unsigned long long c;
+	unsigned long period_cycles, prescale, pv, dc;
+	unsigned long offset;
+
+	if (period_ns == 0 || duty_ns > period_ns)
+		return -EINVAL;
+
+	offset = (pwm - chip->base) ? 0x10 : 0;
+
+	c = clk_get_rate(pc->clk);
+	c = c * period_ns;
+	do_div(c, 1000000000);
+	period_cycles = c;
+
+	if (period_cycles < 1)
+		period_cycles = 1;
+	prescale = (period_cycles - 1) / 1024;
+	pv = period_cycles / (prescale + 1) - 1;
+
+	if (prescale > 63)
+		return -EINVAL;
+
+	if (duty_ns == period_ns)
+		dc = PWMDCR_FD;
+	else
+		dc = (pv + 1) * duty_ns / period_ns;
+
+	/* NOTE: the clock to PWM has to be enabled first
+	 * before writing to the registers
+	 */
+	clk_enable(pc->clk);
+	__raw_writel(prescale, pc->mmio_base + offset + PWMCR);
+	__raw_writel(dc, pc->mmio_base + offset + PWMDCR);
+	__raw_writel(pv, pc->mmio_base + offset + PWMPCR);
+	clk_disable(pc->clk);
+
+	return 0;
+}
+
+static int pxa_pwm_enable(struct pwm_chip *chip, unsigned int pwm)
+{
+	struct pxa_pwm_chip *pc = to_pxa_pwm_chip(chip);
+	int rc = 0;
+
+	if (!pc->clk_enabled) {
+		rc = clk_enable(pc->clk);
+		if (!rc)
+			pc->clk_enabled = 1;
+	}
+	return rc;
+}
+
+static void pxa_pwm_disable(struct pwm_chip *chip, unsigned int pwm)
+{
+	struct pxa_pwm_chip *pc = to_pxa_pwm_chip(chip);
+
+	if (pc->clk_enabled) {
+		clk_disable(pc->clk);
+		pc->clk_enabled = 0;
+	}
+}
+
+static struct pwm_ops pxa_pwm_ops = {
+	.config = pxa_pwm_config,
+	.enable = pxa_pwm_enable,
+	.disable = pxa_pwm_disable,
+	.owner = THIS_MODULE,
+};
+
+static int __devinit pwm_probe(struct platform_device *pdev)
+{
+	const struct platform_device_id *id = platform_get_device_id(pdev);
+	struct pxa_pwm_chip *pwm;
+	struct resource *r;
+	int ret = 0;
+
+	pwm = kzalloc(sizeof(*pwm), GFP_KERNEL);
+	if (pwm == NULL) {
+		dev_err(&pdev->dev, "failed to allocate memory\n");
+		return -ENOMEM;
+	}
+
+	pwm->clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(pwm->clk)) {
+		ret = PTR_ERR(pwm->clk);
+		goto err_free;
+	}
+	pwm->clk_enabled = 0;
+
+	pwm->chip.dev = &pdev->dev;
+	pwm->chip.ops = &pxa_pwm_ops;
+	pwm->chip.base = -1;
+	pwm->chip.npwm = (id->driver_data & HAS_SECONDARY_PWM) ? 2 : 1;
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (r == NULL) {
+		dev_err(&pdev->dev, "no memory resource defined\n");
+		ret = -ENODEV;
+		goto err_free_clk;
+	}
+
+	r = request_mem_region(r->start, resource_size(r), pdev->name);
+	if (r == NULL) {
+		dev_err(&pdev->dev, "failed to request memory resource\n");
+		ret = -EBUSY;
+		goto err_free_clk;
+	}
+
+	pwm->mmio_base = ioremap(r->start, resource_size(r));
+	if (pwm->mmio_base == NULL) {
+		dev_err(&pdev->dev, "failed to ioremap() registers\n");
+		ret = -ENODEV;
+		goto err_free_mem;
+	}
+
+	ret = pwmchip_add(&pwm->chip);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, pwm);
+	return 0;
+
+err_free_mem:
+	release_mem_region(r->start, resource_size(r));
+err_free_clk:
+	clk_put(pwm->clk);
+err_free:
+	kfree(pwm);
+	return ret;
+}
+
+static int __devexit pwm_remove(struct platform_device *pdev)
+{
+	struct pxa_pwm_chip *chip;
+	struct resource *r;
+
+	chip = platform_get_drvdata(pdev);
+	if (chip == NULL)
+		return -ENODEV;
+
+	pwmchip_remove(&chip->chip);
+
+	iounmap(chip->mmio_base);
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(r->start, resource_size(r));
+
+	clk_put(chip->clk);
+	kfree(chip);
+	return 0;
+}
+
+static struct platform_driver pwm_driver = {
+	.driver		= {
+		.name	= "pxa25x-pwm",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= pwm_probe,
+	.remove		= __devexit_p(pwm_remove),
+	.id_table	= pwm_id_table,
+};
+
+static int __init pwm_init(void)
+{
+	return platform_driver_register(&pwm_driver);
+}
+arch_initcall(pwm_init);
+
+static void __exit pwm_exit(void)
+{
+	platform_driver_unregister(&pwm_driver);
+}
+module_exit(pwm_exit);
+
+MODULE_LICENSE("GPL v2");
-- 
1.7.9

WARNING: multiple messages have this Message-ID (diff)
From: thierry.reding@avionic-design.de (Thierry Reding)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 09/10] pwm: Add PXA support
Date: Mon,  6 Feb 2012 16:19:44 +0100	[thread overview]
Message-ID: <1328541585-24642-10-git-send-email-thierry.reding@avionic-design.de> (raw)
In-Reply-To: <1328541585-24642-1-git-send-email-thierry.reding@avionic-design.de>

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
---
 arch/arm/plat-pxa/Makefile |    1 -
 arch/arm/plat-pxa/pwm.c    |  304 --------------------------------------------
 drivers/pwm/Kconfig        |    9 ++
 drivers/pwm/Makefile       |    1 +
 drivers/pwm/pwm-pxa.c      |  243 +++++++++++++++++++++++++++++++++++
 5 files changed, 253 insertions(+), 305 deletions(-)
 delete mode 100644 arch/arm/plat-pxa/pwm.c
 create mode 100644 drivers/pwm/pwm-pxa.c

diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile
index f302d04..af8e484 100644
--- a/arch/arm/plat-pxa/Makefile
+++ b/arch/arm/plat-pxa/Makefile
@@ -8,5 +8,4 @@ obj-$(CONFIG_PXA3xx)		+= mfp.o
 obj-$(CONFIG_PXA95x)		+= mfp.o
 obj-$(CONFIG_ARCH_MMP)		+= mfp.o
 
-obj-$(CONFIG_HAVE_PWM)		+= pwm.o
 obj-$(CONFIG_PXA_SSP)		+= ssp.o
diff --git a/arch/arm/plat-pxa/pwm.c b/arch/arm/plat-pxa/pwm.c
deleted file mode 100644
index ef32686..0000000
--- a/arch/arm/plat-pxa/pwm.c
+++ /dev/null
@@ -1,304 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/pwm.c
- *
- * simple driver for PWM (Pulse Width Modulator) controller
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * 2008-02-13	initial version
- * 		eric miao <eric.miao@marvell.com>
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/pwm.h>
-
-#include <asm/div64.h>
-
-#define HAS_SECONDARY_PWM	0x10
-#define PWM_ID_BASE(d)		((d) & 0xf)
-
-static const struct platform_device_id pwm_id_table[] = {
-	/*   PWM    has_secondary_pwm? */
-	{ "pxa25x-pwm", 0 },
-	{ "pxa27x-pwm", 0 | HAS_SECONDARY_PWM },
-	{ "pxa168-pwm", 1 },
-	{ "pxa910-pwm", 1 },
-	{ },
-};
-MODULE_DEVICE_TABLE(platform, pwm_id_table);
-
-/* PWM registers and bits definitions */
-#define PWMCR		(0x00)
-#define PWMDCR		(0x04)
-#define PWMPCR		(0x08)
-
-#define PWMCR_SD	(1 << 6)
-#define PWMDCR_FD	(1 << 10)
-
-struct pwm_device {
-	struct list_head	node;
-	struct pwm_device	*secondary;
-	struct platform_device	*pdev;
-
-	const char	*label;
-	struct clk	*clk;
-	int		clk_enabled;
-	void __iomem	*mmio_base;
-
-	unsigned int	use_count;
-	unsigned int	pwm_id;
-};
-
-/*
- * period_ns = 10^9 * (PRESCALE + 1) * (PV + 1) / PWM_CLK_RATE
- * duty_ns   = 10^9 * (PRESCALE + 1) * DC / PWM_CLK_RATE
- */
-int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
-{
-	unsigned long long c;
-	unsigned long period_cycles, prescale, pv, dc;
-
-	if (pwm == NULL || period_ns == 0 || duty_ns > period_ns)
-		return -EINVAL;
-
-	c = clk_get_rate(pwm->clk);
-	c = c * period_ns;
-	do_div(c, 1000000000);
-	period_cycles = c;
-
-	if (period_cycles < 1)
-		period_cycles = 1;
-	prescale = (period_cycles - 1) / 1024;
-	pv = period_cycles / (prescale + 1) - 1;
-
-	if (prescale > 63)
-		return -EINVAL;
-
-	if (duty_ns == period_ns)
-		dc = PWMDCR_FD;
-	else
-		dc = (pv + 1) * duty_ns / period_ns;
-
-	/* NOTE: the clock to PWM has to be enabled first
-	 * before writing to the registers
-	 */
-	clk_enable(pwm->clk);
-	__raw_writel(prescale, pwm->mmio_base + PWMCR);
-	__raw_writel(dc, pwm->mmio_base + PWMDCR);
-	__raw_writel(pv, pwm->mmio_base + PWMPCR);
-	clk_disable(pwm->clk);
-
-	return 0;
-}
-EXPORT_SYMBOL(pwm_config);
-
-int pwm_enable(struct pwm_device *pwm)
-{
-	int rc = 0;
-
-	if (!pwm->clk_enabled) {
-		rc = clk_enable(pwm->clk);
-		if (!rc)
-			pwm->clk_enabled = 1;
-	}
-	return rc;
-}
-EXPORT_SYMBOL(pwm_enable);
-
-void pwm_disable(struct pwm_device *pwm)
-{
-	if (pwm->clk_enabled) {
-		clk_disable(pwm->clk);
-		pwm->clk_enabled = 0;
-	}
-}
-EXPORT_SYMBOL(pwm_disable);
-
-static DEFINE_MUTEX(pwm_lock);
-static LIST_HEAD(pwm_list);
-
-struct pwm_device *pwm_request(int pwm_id, const char *label)
-{
-	struct pwm_device *pwm;
-	int found = 0;
-
-	mutex_lock(&pwm_lock);
-
-	list_for_each_entry(pwm, &pwm_list, node) {
-		if (pwm->pwm_id == pwm_id) {
-			found = 1;
-			break;
-		}
-	}
-
-	if (found) {
-		if (pwm->use_count == 0) {
-			pwm->use_count++;
-			pwm->label = label;
-		} else
-			pwm = ERR_PTR(-EBUSY);
-	} else
-		pwm = ERR_PTR(-ENOENT);
-
-	mutex_unlock(&pwm_lock);
-	return pwm;
-}
-EXPORT_SYMBOL(pwm_request);
-
-void pwm_free(struct pwm_device *pwm)
-{
-	mutex_lock(&pwm_lock);
-
-	if (pwm->use_count) {
-		pwm->use_count--;
-		pwm->label = NULL;
-	} else
-		pr_warning("PWM device already freed\n");
-
-	mutex_unlock(&pwm_lock);
-}
-EXPORT_SYMBOL(pwm_free);
-
-static inline void __add_pwm(struct pwm_device *pwm)
-{
-	mutex_lock(&pwm_lock);
-	list_add_tail(&pwm->node, &pwm_list);
-	mutex_unlock(&pwm_lock);
-}
-
-static int __devinit pwm_probe(struct platform_device *pdev)
-{
-	const struct platform_device_id *id = platform_get_device_id(pdev);
-	struct pwm_device *pwm, *secondary = NULL;
-	struct resource *r;
-	int ret = 0;
-
-	pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL);
-	if (pwm == NULL) {
-		dev_err(&pdev->dev, "failed to allocate memory\n");
-		return -ENOMEM;
-	}
-
-	pwm->clk = clk_get(&pdev->dev, NULL);
-	if (IS_ERR(pwm->clk)) {
-		ret = PTR_ERR(pwm->clk);
-		goto err_free;
-	}
-	pwm->clk_enabled = 0;
-
-	pwm->use_count = 0;
-	pwm->pwm_id = PWM_ID_BASE(id->driver_data) + pdev->id;
-	pwm->pdev = pdev;
-
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (r == NULL) {
-		dev_err(&pdev->dev, "no memory resource defined\n");
-		ret = -ENODEV;
-		goto err_free_clk;
-	}
-
-	r = request_mem_region(r->start, resource_size(r), pdev->name);
-	if (r == NULL) {
-		dev_err(&pdev->dev, "failed to request memory resource\n");
-		ret = -EBUSY;
-		goto err_free_clk;
-	}
-
-	pwm->mmio_base = ioremap(r->start, resource_size(r));
-	if (pwm->mmio_base == NULL) {
-		dev_err(&pdev->dev, "failed to ioremap() registers\n");
-		ret = -ENODEV;
-		goto err_free_mem;
-	}
-
-	if (id->driver_data & HAS_SECONDARY_PWM) {
-		secondary = kzalloc(sizeof(struct pwm_device), GFP_KERNEL);
-		if (secondary == NULL) {
-			ret = -ENOMEM;
-			goto err_free_mem;
-		}
-
-		*secondary = *pwm;
-		pwm->secondary = secondary;
-
-		/* registers for the second PWM has offset of 0x10 */
-		secondary->mmio_base = pwm->mmio_base + 0x10;
-		secondary->pwm_id = pdev->id + 2;
-	}
-
-	__add_pwm(pwm);
-	if (secondary)
-		__add_pwm(secondary);
-
-	platform_set_drvdata(pdev, pwm);
-	return 0;
-
-err_free_mem:
-	release_mem_region(r->start, resource_size(r));
-err_free_clk:
-	clk_put(pwm->clk);
-err_free:
-	kfree(pwm);
-	return ret;
-}
-
-static int __devexit pwm_remove(struct platform_device *pdev)
-{
-	struct pwm_device *pwm;
-	struct resource *r;
-
-	pwm = platform_get_drvdata(pdev);
-	if (pwm == NULL)
-		return -ENODEV;
-
-	mutex_lock(&pwm_lock);
-
-	if (pwm->secondary) {
-		list_del(&pwm->secondary->node);
-		kfree(pwm->secondary);
-	}
-
-	list_del(&pwm->node);
-	mutex_unlock(&pwm_lock);
-
-	iounmap(pwm->mmio_base);
-
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(r->start, resource_size(r));
-
-	clk_put(pwm->clk);
-	kfree(pwm);
-	return 0;
-}
-
-static struct platform_driver pwm_driver = {
-	.driver		= {
-		.name	= "pxa25x-pwm",
-		.owner	= THIS_MODULE,
-	},
-	.probe		= pwm_probe,
-	.remove		= __devexit_p(pwm_remove),
-	.id_table	= pwm_id_table,
-};
-
-static int __init pwm_init(void)
-{
-	return platform_driver_register(&pwm_driver);
-}
-arch_initcall(pwm_init);
-
-static void __exit pwm_exit(void)
-{
-	platform_driver_unregister(&pwm_driver);
-}
-module_exit(pwm_exit);
-
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index eb54042..0ef4f30 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -18,6 +18,15 @@ config PWM_BFIN
 	  To compile this driver as a module, choose M here: the module
 	  will be called pwm-bfin.
 
+config PWM_PXA
+	tristate "PXA PWM support"
+	depends on ARCH_PXA
+	help
+	  Generic PWM framework driver for PXA.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-pxa.
+
 config PWM_TEGRA
 	tristate "NVIDIA Tegra PWM support"
 	depends on ARCH_TEGRA
diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
index 251b8d2..e859c51 100644
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
@@ -1,3 +1,4 @@
 obj-$(CONFIG_PWM)		+= core.o
 obj-$(CONFIG_PWM_BFIN)		+= pwm-bfin.o
+obj-$(CONFIG_PWM_PXA)		+= pwm-pxa.o
 obj-$(CONFIG_PWM_TEGRA)		+= pwm-tegra.o
diff --git a/drivers/pwm/pwm-pxa.c b/drivers/pwm/pwm-pxa.c
new file mode 100644
index 0000000..6434b18
--- /dev/null
+++ b/drivers/pwm/pwm-pxa.c
@@ -0,0 +1,243 @@
+/*
+ * linux/arch/arm/mach-pxa/pwm.c
+ *
+ * simple driver for PWM (Pulse Width Modulator) controller
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * 2008-02-13	initial version
+ * 		eric miao <eric.miao@marvell.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/pwm.h>
+
+#include <asm/div64.h>
+
+#define HAS_SECONDARY_PWM	0x10
+#define PWM_ID_BASE(d)		((d) & 0xf)
+
+static const struct platform_device_id pwm_id_table[] = {
+	/*   PWM    has_secondary_pwm? */
+	{ "pxa25x-pwm", 0 },
+	{ "pxa27x-pwm", 0 | HAS_SECONDARY_PWM },
+	{ "pxa168-pwm", 1 },
+	{ "pxa910-pwm", 1 },
+	{ },
+};
+MODULE_DEVICE_TABLE(platform, pwm_id_table);
+
+/* PWM registers and bits definitions */
+#define PWMCR		(0x00)
+#define PWMDCR		(0x04)
+#define PWMPCR		(0x08)
+
+#define PWMCR_SD	(1 << 6)
+#define PWMDCR_FD	(1 << 10)
+
+struct pxa_pwm_chip {
+	struct pwm_chip	chip;
+	struct device	*dev;
+
+	struct clk	*clk;
+	int		clk_enabled;
+	void __iomem	*mmio_base;
+};
+
+static inline struct pxa_pwm_chip *to_pxa_pwm_chip(struct pwm_chip *chip)
+{
+	return container_of(chip, struct pxa_pwm_chip, chip);
+}
+
+/*
+ * period_ns = 10^9 * (PRESCALE + 1) * (PV + 1) / PWM_CLK_RATE
+ * duty_ns   = 10^9 * (PRESCALE + 1) * DC / PWM_CLK_RATE
+ */
+static int pxa_pwm_config(struct pwm_chip *chip, unsigned int pwm, int duty_ns, int period_ns)
+{
+	struct pxa_pwm_chip *pc = to_pxa_pwm_chip(chip);
+	unsigned long long c;
+	unsigned long period_cycles, prescale, pv, dc;
+	unsigned long offset;
+
+	if (period_ns == 0 || duty_ns > period_ns)
+		return -EINVAL;
+
+	offset = (pwm - chip->base) ? 0x10 : 0;
+
+	c = clk_get_rate(pc->clk);
+	c = c * period_ns;
+	do_div(c, 1000000000);
+	period_cycles = c;
+
+	if (period_cycles < 1)
+		period_cycles = 1;
+	prescale = (period_cycles - 1) / 1024;
+	pv = period_cycles / (prescale + 1) - 1;
+
+	if (prescale > 63)
+		return -EINVAL;
+
+	if (duty_ns == period_ns)
+		dc = PWMDCR_FD;
+	else
+		dc = (pv + 1) * duty_ns / period_ns;
+
+	/* NOTE: the clock to PWM has to be enabled first
+	 * before writing to the registers
+	 */
+	clk_enable(pc->clk);
+	__raw_writel(prescale, pc->mmio_base + offset + PWMCR);
+	__raw_writel(dc, pc->mmio_base + offset + PWMDCR);
+	__raw_writel(pv, pc->mmio_base + offset + PWMPCR);
+	clk_disable(pc->clk);
+
+	return 0;
+}
+
+static int pxa_pwm_enable(struct pwm_chip *chip, unsigned int pwm)
+{
+	struct pxa_pwm_chip *pc = to_pxa_pwm_chip(chip);
+	int rc = 0;
+
+	if (!pc->clk_enabled) {
+		rc = clk_enable(pc->clk);
+		if (!rc)
+			pc->clk_enabled = 1;
+	}
+	return rc;
+}
+
+static void pxa_pwm_disable(struct pwm_chip *chip, unsigned int pwm)
+{
+	struct pxa_pwm_chip *pc = to_pxa_pwm_chip(chip);
+
+	if (pc->clk_enabled) {
+		clk_disable(pc->clk);
+		pc->clk_enabled = 0;
+	}
+}
+
+static struct pwm_ops pxa_pwm_ops = {
+	.config = pxa_pwm_config,
+	.enable = pxa_pwm_enable,
+	.disable = pxa_pwm_disable,
+	.owner = THIS_MODULE,
+};
+
+static int __devinit pwm_probe(struct platform_device *pdev)
+{
+	const struct platform_device_id *id = platform_get_device_id(pdev);
+	struct pxa_pwm_chip *pwm;
+	struct resource *r;
+	int ret = 0;
+
+	pwm = kzalloc(sizeof(*pwm), GFP_KERNEL);
+	if (pwm == NULL) {
+		dev_err(&pdev->dev, "failed to allocate memory\n");
+		return -ENOMEM;
+	}
+
+	pwm->clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(pwm->clk)) {
+		ret = PTR_ERR(pwm->clk);
+		goto err_free;
+	}
+	pwm->clk_enabled = 0;
+
+	pwm->chip.dev = &pdev->dev;
+	pwm->chip.ops = &pxa_pwm_ops;
+	pwm->chip.base = -1;
+	pwm->chip.npwm = (id->driver_data & HAS_SECONDARY_PWM) ? 2 : 1;
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (r == NULL) {
+		dev_err(&pdev->dev, "no memory resource defined\n");
+		ret = -ENODEV;
+		goto err_free_clk;
+	}
+
+	r = request_mem_region(r->start, resource_size(r), pdev->name);
+	if (r == NULL) {
+		dev_err(&pdev->dev, "failed to request memory resource\n");
+		ret = -EBUSY;
+		goto err_free_clk;
+	}
+
+	pwm->mmio_base = ioremap(r->start, resource_size(r));
+	if (pwm->mmio_base == NULL) {
+		dev_err(&pdev->dev, "failed to ioremap() registers\n");
+		ret = -ENODEV;
+		goto err_free_mem;
+	}
+
+	ret = pwmchip_add(&pwm->chip);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, pwm);
+	return 0;
+
+err_free_mem:
+	release_mem_region(r->start, resource_size(r));
+err_free_clk:
+	clk_put(pwm->clk);
+err_free:
+	kfree(pwm);
+	return ret;
+}
+
+static int __devexit pwm_remove(struct platform_device *pdev)
+{
+	struct pxa_pwm_chip *chip;
+	struct resource *r;
+
+	chip = platform_get_drvdata(pdev);
+	if (chip == NULL)
+		return -ENODEV;
+
+	pwmchip_remove(&chip->chip);
+
+	iounmap(chip->mmio_base);
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(r->start, resource_size(r));
+
+	clk_put(chip->clk);
+	kfree(chip);
+	return 0;
+}
+
+static struct platform_driver pwm_driver = {
+	.driver		= {
+		.name	= "pxa25x-pwm",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= pwm_probe,
+	.remove		= __devexit_p(pwm_remove),
+	.id_table	= pwm_id_table,
+};
+
+static int __init pwm_init(void)
+{
+	return platform_driver_register(&pwm_driver);
+}
+arch_initcall(pwm_init);
+
+static void __exit pwm_exit(void)
+{
+	platform_driver_unregister(&pwm_driver);
+}
+module_exit(pwm_exit);
+
+MODULE_LICENSE("GPL v2");
-- 
1.7.9

  parent reply	other threads:[~2012-02-06 15:19 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-02-06 15:19 [PATCH v2 00/10] Add PWM framework and device-tree support Thierry Reding
2012-02-06 15:19 ` Thierry Reding
     [not found] ` <1328541585-24642-1-git-send-email-thierry.reding-RM9K5IK7kjKj5M59NBduVrNAH6kLmebB@public.gmane.org>
2012-02-06 15:19   ` [PATCH v2 01/10] PWM: add pwm framework support Thierry Reding
2012-02-06 15:19     ` Thierry Reding
2012-02-06 15:19   ` [PATCH v2 02/10] pwm: Allow chips to support multiple PWMs Thierry Reding
2012-02-06 15:19     ` Thierry Reding
     [not found]     ` <1328541585-24642-3-git-send-email-thierry.reding-RM9K5IK7kjKj5M59NBduVrNAH6kLmebB@public.gmane.org>
2012-02-06 21:22       ` Lars-Peter Clausen
2012-02-06 21:22         ` Lars-Peter Clausen
     [not found]         ` <4F3044A9.8000202-Qo5EllUWu/uELgA04lAiVw@public.gmane.org>
2012-02-07  7:04           ` Thierry Reding
2012-02-07  7:04             ` Thierry Reding
     [not found]             ` <20120207070400.GA29238-RM9K5IK7kjIQXX3q8xo1gnVAuStQJXxyR5q1nwbD4aMs9pC9oP6+/A@public.gmane.org>
2012-02-07 11:38               ` Mark Brown
2012-02-07 11:38                 ` Mark Brown
2012-02-08  9:13               ` Russell King - ARM Linux
2012-02-08  9:13                 ` Russell King - ARM Linux
     [not found]                 ` <20120208091327.GH889-l+eeeJia6m9vn6HldHNs0ANdhmdF6hFW@public.gmane.org>
2012-02-08 11:12                   ` Thierry Reding
2012-02-08 11:12                     ` Thierry Reding
2012-02-07 22:53       ` Ryan Mallon
2012-02-07 22:53         ` Ryan Mallon
     [not found]         ` <4F31AB63.3020301-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2012-02-08  8:15           ` Thierry Reding
2012-02-08  8:15             ` Thierry Reding
     [not found]             ` <20120208081508.GA6673-RM9K5IK7kjIQXX3q8xo1gnVAuStQJXxyR5q1nwbD4aMs9pC9oP6+/A@public.gmane.org>
2012-02-08  9:00               ` Sascha Hauer
2012-02-08  9:00                 ` Sascha Hauer
     [not found]                 ` <20120208090055.GP3852-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2012-02-08 11:16                   ` Thierry Reding
2012-02-08 11:16                     ` Thierry Reding
2012-02-08  9:17               ` Russell King - ARM Linux
2012-02-08  9:17                 ` Russell King - ARM Linux
     [not found]                 ` <20120208091720.GI889-l+eeeJia6m9vn6HldHNs0ANdhmdF6hFW@public.gmane.org>
2012-02-08 10:31                   ` Thierry Reding
2012-02-08 10:31                     ` Thierry Reding
2012-02-06 15:19   ` [PATCH v2 03/10] of: Add PWM support Thierry Reding
2012-02-06 15:19     ` Thierry Reding
2012-02-06 15:19   ` [PATCH v2 04/10] arm/tegra: Fix PWM clock programming Thierry Reding
2012-02-06 15:19     ` Thierry Reding
2012-02-06 15:19   ` [PATCH v2 05/10] arm/tegra: Provide clock for only one PWM controller Thierry Reding
2012-02-06 15:19     ` Thierry Reding
2012-02-06 15:19   ` [PATCH v2 06/10] pwm: Add NVIDIA Tegra SoC support Thierry Reding
2012-02-06 15:19     ` Thierry Reding
2012-02-06 15:19   ` [PATCH v2 07/10] arm/tegra: Add PWFM controller device tree probing Thierry Reding
2012-02-06 15:19     ` Thierry Reding
2012-02-06 15:19   ` [PATCH v2 08/10] pwm: Add Blackfin support Thierry Reding
2012-02-06 15:19     ` Thierry Reding
2012-02-06 15:19   ` Thierry Reding [this message]
2012-02-06 15:19     ` [PATCH v2 09/10] pwm: Add PXA support Thierry Reding
2012-02-06 15:19   ` [PATCH v2 10/10] pwm-backlight: Add rudimentary device tree support Thierry Reding
2012-02-06 15:19     ` Thierry Reding

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1328541585-24642-10-git-send-email-thierry.reding@avionic-design.de \
    --to=thierry.reding-rm9k5ik7kjkj5m59nbduvrnah6klmebb@public.gmane.org \
    --cc=arnd-r2nGTMty4D4@public.gmane.org \
    --cc=broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org \
    --cc=ccross-z5hGa2qSFaRBDgjK7y7TUQ@public.gmane.org \
    --cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
    --cc=eric.y.miao-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org \
    --cc=kurt.van.dijck-/BeEPy95v10@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=matthias-RprLehDfhQ3k1uMJSBkQmQ@public.gmane.org \
    --cc=olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org \
    --cc=rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org \
    --cc=rpurdie-Fm38FmjxZ/leoWH0uzbU5w@public.gmane.org \
    --cc=s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
    --cc=vapier-aBrp7R+bbdUdnm+yROfE0A@public.gmane.org \
    --cc=wmb-D5eQfiDGL7eakBO8gow8eQ@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.