From: Laxman Dewangan <ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org> To: sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org, lrg-l0cyMroinI0@public.gmane.org, broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org, jedu-kDsPt+C1G03kYMGBc/C6ZA@public.gmane.org, gg-kDsPt+C1G03kYMGBc/C6ZA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Cc: linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org Subject: [PATCH V1 2/2] regulator: tps65910: Enable register caching of voltage controls. Date: Wed, 8 Feb 2012 16:16:25 +0530 [thread overview] Message-ID: <1328697985-22504-2-git-send-email-ldewangan@nvidia.com> (raw) In-Reply-To: <1328697985-22504-1-git-send-email-ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org> Enabling the caching of the registers which is used for voltage controls. By doing this, the modify_bits operation is faster as it does not involve the i2c register read from device, just read from cache. This results faster set voltage operation. Signed-off-by: Laxman Dewangan <ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org> --- drivers/regulator/tps65910-regulator.c | 12 ++++++++++++ 1 files changed, 12 insertions(+), 0 deletions(-) diff --git a/drivers/regulator/tps65910-regulator.c b/drivers/regulator/tps65910-regulator.c index 9092b7f..3731d69 100644 --- a/drivers/regulator/tps65910-regulator.c +++ b/drivers/regulator/tps65910-regulator.c @@ -1123,6 +1123,18 @@ static __devinit int tps65910_probe(struct platform_device *pdev) pmic->desc[i].ops = &tps65911_ops; } + /* Enable register caching */ + tps65910_enable_reg_cache(tps65910, pmic->get_ctrl_reg(i)); + /* VDD1/VDD2/VDDCTRL-TPS65911 have SR and OP register */ + if ((i == TPS65910_REG_VDD1) || (i == TPS65910_REG_VDD2) || + ((tps65910_chip_id(tps65910) == TPS65911) && + (i == TPS65911_REG_VDDCTRL))) { + tps65910_enable_reg_cache(tps65910, + pmic->get_ctrl_reg(i) + 1); + tps65910_enable_reg_cache(tps65910, + pmic->get_ctrl_reg(i) + 2); + } + err = tps65910_set_ext_sleep_config(pmic, i, pmic_plat_data->regulator_ext_sleep_control[i]); /* -- 1.7.1.1
WARNING: multiple messages have this Message-ID (diff)
From: Laxman Dewangan <ldewangan@nvidia.com> To: sameo@linux.intel.com, lrg@ti.com, broonie@opensource.wolfsonmicro.com, jedu@slimlogic.co.uk, gg@slimlogic.co.uk, linux-kernel@vger.kernel.org Cc: linux-tegra@vger.kernel.org, ldewangan@nvidia.com Subject: [PATCH V1 2/2] regulator: tps65910: Enable register caching of voltage controls. Date: Wed, 8 Feb 2012 16:16:25 +0530 [thread overview] Message-ID: <1328697985-22504-2-git-send-email-ldewangan@nvidia.com> (raw) In-Reply-To: <1328697985-22504-1-git-send-email-ldewangan@nvidia.com> Enabling the caching of the registers which is used for voltage controls. By doing this, the modify_bits operation is faster as it does not involve the i2c register read from device, just read from cache. This results faster set voltage operation. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> --- drivers/regulator/tps65910-regulator.c | 12 ++++++++++++ 1 files changed, 12 insertions(+), 0 deletions(-) diff --git a/drivers/regulator/tps65910-regulator.c b/drivers/regulator/tps65910-regulator.c index 9092b7f..3731d69 100644 --- a/drivers/regulator/tps65910-regulator.c +++ b/drivers/regulator/tps65910-regulator.c @@ -1123,6 +1123,18 @@ static __devinit int tps65910_probe(struct platform_device *pdev) pmic->desc[i].ops = &tps65911_ops; } + /* Enable register caching */ + tps65910_enable_reg_cache(tps65910, pmic->get_ctrl_reg(i)); + /* VDD1/VDD2/VDDCTRL-TPS65911 have SR and OP register */ + if ((i == TPS65910_REG_VDD1) || (i == TPS65910_REG_VDD2) || + ((tps65910_chip_id(tps65910) == TPS65911) && + (i == TPS65911_REG_VDDCTRL))) { + tps65910_enable_reg_cache(tps65910, + pmic->get_ctrl_reg(i) + 1); + tps65910_enable_reg_cache(tps65910, + pmic->get_ctrl_reg(i) + 2); + } + err = tps65910_set_ext_sleep_config(pmic, i, pmic_plat_data->regulator_ext_sleep_control[i]); /* -- 1.7.1.1
next prev parent reply other threads:[~2012-02-08 10:46 UTC|newest] Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top 2012-02-08 10:46 [PATCH V1 1/2] mfd: tps65910: use regmap for device register access Laxman Dewangan 2012-02-08 10:46 ` Laxman Dewangan [not found] ` <1328697985-22504-1-git-send-email-ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org> 2012-02-08 10:46 ` Laxman Dewangan [this message] 2012-02-08 10:46 ` [PATCH V1 2/2] regulator: tps65910: Enable register caching of voltage controls Laxman Dewangan 2012-02-08 11:41 ` [PATCH V1 1/2] mfd: tps65910: use regmap for device register access Mark Brown 2012-02-08 11:41 ` Mark Brown [not found] ` <20120208114120.GF3120-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org> 2012-02-08 12:15 ` Laxman Dewangan 2012-02-08 12:15 ` Laxman Dewangan 2012-02-08 13:07 ` Mark Brown [not found] ` <20120208130726.GB5943-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org> 2012-02-08 13:34 ` Laxman Dewangan 2012-02-08 13:34 ` Laxman Dewangan [not found] ` <4F3279D6.4000009-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org> 2012-02-08 13:58 ` Mark Brown 2012-02-08 13:58 ` Mark Brown 2012-02-09 5:03 ` Laxman Dewangan [not found] ` <4F335385.5040400-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org> 2012-02-09 11:55 ` Mark Brown 2012-02-09 11:55 ` Mark Brown [not found] ` <20120209115502.GD3058-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org> 2012-02-09 11:59 ` Laxman Dewangan 2012-02-09 11:59 ` Laxman Dewangan [not found] ` <4F33B52A.5020900-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org> 2012-02-09 12:03 ` Mark Brown 2012-02-09 12:03 ` Mark Brown [not found] ` <20120209120312.GE3058-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org> 2012-02-09 12:09 ` Laxman Dewangan 2012-02-09 12:09 ` Laxman Dewangan
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1328697985-22504-2-git-send-email-ldewangan@nvidia.com \ --to=ldewangan-ddmlm1+adcrqt0dzr+alfa@public.gmane.org \ --cc=broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org \ --cc=gg-kDsPt+C1G03kYMGBc/C6ZA@public.gmane.org \ --cc=jedu-kDsPt+C1G03kYMGBc/C6ZA@public.gmane.org \ --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \ --cc=linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \ --cc=lrg-l0cyMroinI0@public.gmane.org \ --cc=sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.