From: Laxman Dewangan <ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org> To: Mark Brown <broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org> Cc: "sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org" <sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>, "lrg-l0cyMroinI0@public.gmane.org" <lrg-l0cyMroinI0@public.gmane.org>, "jedu-kDsPt+C1G03kYMGBc/C6ZA@public.gmane.org" <jedu-kDsPt+C1G03kYMGBc/C6ZA@public.gmane.org>, "gg-kDsPt+C1G03kYMGBc/C6ZA@public.gmane.org" <gg-kDsPt+C1G03kYMGBc/C6ZA@public.gmane.org>, "linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org" <linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>, "linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org" <linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org> Subject: Re: [PATCH V1 1/2] mfd: tps65910: use regmap for device register access. Date: Thu, 9 Feb 2012 17:39:03 +0530 [thread overview] Message-ID: <4F33B75F.6050300@nvidia.com> (raw) In-Reply-To: <20120209120312.GE3058-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org> On Thursday 09 February 2012 05:33 PM, Mark Brown wrote: > * PGP Signed by an unknown key > > On Thu, Feb 09, 2012 at 05:29:38PM +0530, Laxman Dewangan wrote: > >> I am working on mfd/tps65910.c and function is: >> static int tps65910_i2c_write(struct tps65910 *tps65910, u8 reg, >> int bytes, void *src) >> All your feedback will help me to improve my next two mfd/pmic >> drivers which I am planning to upstream... > Yeah, I know that's the i2c_write() function but all the callers I > noticed were calling it with bytes set to 1. > Yes, currently all callers are calling with 1 byte but when we will add rtc (which is not there currently), at that time, it may call multibyte read/write. The interface is such that it can support multi-byte transfer. And when using for single byte transfer (currently) and if it is cached, regmap_raw_write() is creating warnings and that's why I broken transfer in multi-transfer in tps65910.c which was not a good idea.. > * Unknown Key > * 0x6E30FDDD
WARNING: multiple messages have this Message-ID (diff)
From: Laxman Dewangan <ldewangan@nvidia.com> To: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: "sameo@linux.intel.com" <sameo@linux.intel.com>, "lrg@ti.com" <lrg@ti.com>, "jedu@slimlogic.co.uk" <jedu@slimlogic.co.uk>, "gg@slimlogic.co.uk" <gg@slimlogic.co.uk>, "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>, "linux-tegra@vger.kernel.org" <linux-tegra@vger.kernel.org> Subject: Re: [PATCH V1 1/2] mfd: tps65910: use regmap for device register access. Date: Thu, 9 Feb 2012 17:39:03 +0530 [thread overview] Message-ID: <4F33B75F.6050300@nvidia.com> (raw) In-Reply-To: <20120209120312.GE3058@opensource.wolfsonmicro.com> On Thursday 09 February 2012 05:33 PM, Mark Brown wrote: > * PGP Signed by an unknown key > > On Thu, Feb 09, 2012 at 05:29:38PM +0530, Laxman Dewangan wrote: > >> I am working on mfd/tps65910.c and function is: >> static int tps65910_i2c_write(struct tps65910 *tps65910, u8 reg, >> int bytes, void *src) >> All your feedback will help me to improve my next two mfd/pmic >> drivers which I am planning to upstream... > Yeah, I know that's the i2c_write() function but all the callers I > noticed were calling it with bytes set to 1. > Yes, currently all callers are calling with 1 byte but when we will add rtc (which is not there currently), at that time, it may call multibyte read/write. The interface is such that it can support multi-byte transfer. And when using for single byte transfer (currently) and if it is cached, regmap_raw_write() is creating warnings and that's why I broken transfer in multi-transfer in tps65910.c which was not a good idea.. > * Unknown Key > * 0x6E30FDDD
next prev parent reply other threads:[~2012-02-09 12:09 UTC|newest] Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top 2012-02-08 10:46 [PATCH V1 1/2] mfd: tps65910: use regmap for device register access Laxman Dewangan 2012-02-08 10:46 ` Laxman Dewangan [not found] ` <1328697985-22504-1-git-send-email-ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org> 2012-02-08 10:46 ` [PATCH V1 2/2] regulator: tps65910: Enable register caching of voltage controls Laxman Dewangan 2012-02-08 10:46 ` Laxman Dewangan 2012-02-08 11:41 ` [PATCH V1 1/2] mfd: tps65910: use regmap for device register access Mark Brown 2012-02-08 11:41 ` Mark Brown [not found] ` <20120208114120.GF3120-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org> 2012-02-08 12:15 ` Laxman Dewangan 2012-02-08 12:15 ` Laxman Dewangan 2012-02-08 13:07 ` Mark Brown [not found] ` <20120208130726.GB5943-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org> 2012-02-08 13:34 ` Laxman Dewangan 2012-02-08 13:34 ` Laxman Dewangan [not found] ` <4F3279D6.4000009-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org> 2012-02-08 13:58 ` Mark Brown 2012-02-08 13:58 ` Mark Brown 2012-02-09 5:03 ` Laxman Dewangan [not found] ` <4F335385.5040400-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org> 2012-02-09 11:55 ` Mark Brown 2012-02-09 11:55 ` Mark Brown [not found] ` <20120209115502.GD3058-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org> 2012-02-09 11:59 ` Laxman Dewangan 2012-02-09 11:59 ` Laxman Dewangan [not found] ` <4F33B52A.5020900-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org> 2012-02-09 12:03 ` Mark Brown 2012-02-09 12:03 ` Mark Brown [not found] ` <20120209120312.GE3058-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org> 2012-02-09 12:09 ` Laxman Dewangan [this message] 2012-02-09 12:09 ` Laxman Dewangan
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=4F33B75F.6050300@nvidia.com \ --to=ldewangan-ddmlm1+adcrqt0dzr+alfa@public.gmane.org \ --cc=broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org \ --cc=gg-kDsPt+C1G03kYMGBc/C6ZA@public.gmane.org \ --cc=jedu-kDsPt+C1G03kYMGBc/C6ZA@public.gmane.org \ --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \ --cc=linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \ --cc=lrg-l0cyMroinI0@public.gmane.org \ --cc=sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.