udev rules for persistent symlinks for adapter?/frontend0 devices

* udev rules for persistent symlinks for adapter?/frontend0 devices
@ 2012-04-24 17:14 Brian J. Murrell
  2012-04-24 23:26 ` Andy Walls
  0 siblings, 1 reply; 4+ messages in thread
From: Brian J. Murrell @ 2012-04-24 17:14 UTC (permalink / raw)
  To: linux-media

[-- Attachment #1: Type: text/plain, Size: 5714 bytes --]

Hi,

I have two DVB devices in my machine that I want to be able to identify
persistently[1].  They are typically on /dev/dvb/adapter{0,1}/frontend0
but their order is arbitrary and can change from one boot to another.

So using udevadm info I tried to find attributes for them that I could
rely on consistently.  Here is the output from:

# udevadm info --attribute-walk --name /dev/dvb/adapter?/frontend0

First device:

  looking at device '/devices/pci0000:00/0000:00:1e.0/0000:02:09.0/dvb/dvb0.frontend0':
    KERNEL=="dvb0.frontend0"
    SUBSYSTEM=="dvb"
    DRIVER==""

  looking at parent device '/devices/pci0000:00/0000:00:1e.0/0000:02:09.0':
    KERNELS=="0000:02:09.0"
    SUBSYSTEMS=="pci"
    DRIVERS=="cx18"
    ATTRS{vendor}=="0x14f1"
    ATTRS{device}=="0x5b7a"
    ATTRS{subsystem_vendor}=="0x0070"
    ATTRS{subsystem_device}=="0x7400"
    ATTRS{class}=="0x040000"
    ATTRS{irq}=="21"
    ATTRS{local_cpus}=="ff"
    ATTRS{local_cpulist}=="0-7"
    ATTRS{dma_mask_bits}=="32"
    ATTRS{consistent_dma_mask_bits}=="32"
    ATTRS{enable}=="1"
    ATTRS{broken_parity_status}=="0"
    ATTRS{msi_bus}==""

  looking at parent device '/devices/pci0000:00/0000:00:1e.0':
    KERNELS=="0000:00:1e.0"
    SUBSYSTEMS=="pci"
    DRIVERS==""
    ATTRS{vendor}=="0x8086"
    ATTRS{device}=="0x244e"
    ATTRS{subsystem_vendor}=="0x0000"
    ATTRS{subsystem_device}=="0x0000"
    ATTRS{class}=="0x060400"
    ATTRS{irq}=="0"
    ATTRS{local_cpus}=="ff"
    ATTRS{local_cpulist}=="0-7"
    ATTRS{dma_mask_bits}=="32"
    ATTRS{consistent_dma_mask_bits}=="32"
    ATTRS{enable}=="1"
    ATTRS{broken_parity_status}=="0"
    ATTRS{msi_bus}=="1"

  looking at parent device '/devices/pci0000:00':
    KERNELS=="pci0000:00"
    SUBSYSTEMS==""
    DRIVERS==""

And the second device:

  looking at device '/devices/pci0000:00/0000:00:1d.7/usb1/1-3/dvb/dvb1.frontend0':
    KERNEL=="dvb1.frontend0"
    SUBSYSTEM=="dvb"
    DRIVER==""

  looking at parent device '/devices/pci0000:00/0000:00:1d.7/usb1/1-3':
    KERNELS=="1-3"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{configuration}==""
    ATTRS{bNumInterfaces}==" 4"
    ATTRS{bConfigurationValue}=="1"
    ATTRS{bmAttributes}=="80"
    ATTRS{bMaxPower}=="500mA"
    ATTRS{urbnum}=="5941719"
    ATTRS{idVendor}=="2040"
    ATTRS{idProduct}=="7200"
    ATTRS{bcdDevice}=="0005"
    ATTRS{bDeviceClass}=="00"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bDeviceProtocol}=="00"
    ATTRS{bNumConfigurations}=="1"
    ATTRS{bMaxPacketSize0}=="64"
    ATTRS{speed}=="480"
    ATTRS{busnum}=="1"
    ATTRS{devnum}=="2"
    ATTRS{devpath}=="3"
    ATTRS{version}==" 2.00"
    ATTRS{maxchild}=="0"
    ATTRS{quirks}=="0x0"
    ATTRS{avoid_reset_quirk}=="0"
    ATTRS{authorized}=="1"
    ATTRS{manufacturer}=="Hauppauge"
    ATTRS{product}=="WinTV HVR-950"
    ATTRS{serial}=="*********"

  looking at parent device '/devices/pci0000:00/0000:00:1d.7/usb1':
    KERNELS=="usb1"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{configuration}==""
    ATTRS{bNumInterfaces}==" 1"
    ATTRS{bConfigurationValue}=="1"
    ATTRS{bmAttributes}=="e0"
    ATTRS{bMaxPower}=="  0mA"
    ATTRS{urbnum}=="52"
    ATTRS{idVendor}=="1d6b"
    ATTRS{idProduct}=="0002"
    ATTRS{bcdDevice}=="0302"
    ATTRS{bDeviceClass}=="09"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bDeviceProtocol}=="00"
    ATTRS{bNumConfigurations}=="1"
    ATTRS{bMaxPacketSize0}=="64"
    ATTRS{speed}=="480"
    ATTRS{busnum}=="1"
    ATTRS{devnum}=="1"
    ATTRS{devpath}=="0"
    ATTRS{version}==" 2.00"
    ATTRS{maxchild}=="8"
    ATTRS{quirks}=="0x0"
    ATTRS{avoid_reset_quirk}=="0"
    ATTRS{authorized}=="1"
    ATTRS{manufacturer}=="Linux 3.2.0-18-generic ehci_hcd"
    ATTRS{product}=="EHCI Host Controller"
    ATTRS{serial}=="0000:00:1d.7"
    ATTRS{authorized_default}=="1"

  looking at parent device '/devices/pci0000:00/0000:00:1d.7':
    KERNELS=="0000:00:1d.7"
    SUBSYSTEMS=="pci"
    DRIVERS=="ehci_hcd"
    ATTRS{vendor}=="0x8086"
    ATTRS{device}=="0x24dd"
    ATTRS{subsystem_vendor}=="0x1043"
    ATTRS{subsystem_device}=="0x80a6"
    ATTRS{class}=="0x0c0320"
    ATTRS{irq}=="23"
    ATTRS{local_cpus}=="ff"
    ATTRS{local_cpulist}=="0-7"
    ATTRS{dma_mask_bits}=="32"
    ATTRS{consistent_dma_mask_bits}=="32"
    ATTRS{enable}=="1"
    ATTRS{broken_parity_status}=="0"
    ATTRS{msi_bus}==""
    ATTRS{companion}==""
    ATTRS{uframe_periodic_max}=="100"

  looking at parent device '/devices/pci0000:00':
    KERNELS=="pci0000:00"
    SUBSYSTEMS==""
    DRIVERS==""

So I tried rules like:

SUBSYSTEM=="dvb", ATTRS{product}=="WinTV HVR-950", SYMLINK="dvb_pvr950q"
SUBSYSTEM=="dvb", DRIVERS=="cx18", SYMLINK="dvb_hvr1600"

but those ended up symlinking to the "net0" device:

lrwxrwxrwx 1 root root 17 Apr 24 12:56 /dev/dvb_hvr1600 -> dvb/adapter0/net0
lrwxrwxrwx 1 root root 17 Apr 24 12:56 /dev/dvb_pvr950q -> dvb/adapter1/net0

How can I create symlinks to the "frontend0" device rather than the
net0 device?

Cheers,
b.

[1] You might wonder why I would care given that they both do
    quite the same thing and who cares which one is "0" and which
    one is "1".  But the reality is that while they might function
    the same the HVR-1600 produces streams with "glitches" in them
    (see my other message to this list "HVR-1600 QAM recordings with
    slight glitches in them" -- but yes, otherwise I couldn't really
    care less about which was which) and the PVR-950Q produces _perfect_
    streams, so I really only want to use the HVR-1600 in "overflow"
    situations.

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 262 bytes --]

^ permalink raw reply	[flat|nested] 4+ messages in thread