From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
To: "John W . Linville" <linville@tuxdriver.com>,
Johannes Berg <johannes@sipsolutions.net>
Cc: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>,
<linux-wireless@vger.kernel.org>,
"Luis R . Rodriguez" <rodrigue@qca.qualcomm.com>
Subject: [PATCH 60g v2 4/5] wireless: 60g protocol constants
Date: Mon, 2 Jul 2012 09:32:35 +0300 [thread overview]
Message-ID: <1341210756-11054-5-git-send-email-qca_vkondrat@qca.qualcomm.com> (raw)
In-Reply-To: <1341210756-11054-1-git-send-email-qca_vkondrat@qca.qualcomm.com>
Provide various constants as defined by the 802.11ad:
frame types, IE's, capability bits, action categories
Introduce GCMP cipher, mandatory by 802.11ad
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
---
include/linux/ieee80211.h | 89 ++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 88 insertions(+), 1 deletion(-)
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 318fc1f..90145bd 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -47,6 +47,7 @@
#define IEEE80211_FCTL_MOREDATA 0x2000
#define IEEE80211_FCTL_PROTECTED 0x4000
#define IEEE80211_FCTL_ORDER 0x8000
+#define IEEE80211_FCTL_CTL_EXT 0x0f00
#define IEEE80211_SCTL_FRAG 0x000F
#define IEEE80211_SCTL_SEQ 0xFFF0
@@ -54,6 +55,7 @@
#define IEEE80211_FTYPE_MGMT 0x0000
#define IEEE80211_FTYPE_CTL 0x0004
#define IEEE80211_FTYPE_DATA 0x0008
+#define IEEE80211_FTYPE_EXT 0x000c
/* management */
#define IEEE80211_STYPE_ASSOC_REQ 0x0000
@@ -70,6 +72,7 @@
#define IEEE80211_STYPE_ACTION 0x00D0
/* control */
+#define IEEE80211_STYPE_CTL_EXT 0x0060
#define IEEE80211_STYPE_BACK_REQ 0x0080
#define IEEE80211_STYPE_BACK 0x0090
#define IEEE80211_STYPE_PSPOLL 0x00A0
@@ -97,6 +100,18 @@
#define IEEE80211_STYPE_QOS_CFPOLL 0x00E0
#define IEEE80211_STYPE_QOS_CFACKPOLL 0x00F0
+/* extension, added by 802.11ad */
+#define IEEE80211_STYPE_DMG_BEACON 0x0000
+
+/* control extension - for IEEE80211_FTYPE_CTL | IEEE80211_STYPE_CTL_EXT */
+#define IEEE80211_CTL_EXT_POLL 0x2000
+#define IEEE80211_CTL_EXT_SPR 0x3000
+#define IEEE80211_CTL_EXT_GRANT 0x4000
+#define IEEE80211_CTL_EXT_DMG_CTS 0x5000
+#define IEEE80211_CTL_EXT_DMG_DTS 0x6000
+#define IEEE80211_CTL_EXT_SSW 0x8000
+#define IEEE80211_CTL_EXT_SSW_FBACK 0x9000
+#define IEEE80211_CTL_EXT_SSW_ACK 0xa000
/* miscellaneous IEEE 802.11 constants */
#define IEEE80211_MAX_FRAG_THRESHOLD 2352
@@ -1124,6 +1139,21 @@ struct ieee80211_ht_operation {
#define WLAN_CAPABILITY_QOS (1<<9)
#define WLAN_CAPABILITY_SHORT_SLOT_TIME (1<<10)
#define WLAN_CAPABILITY_DSSS_OFDM (1<<13)
+
+/* DMG (60gHz) 802.11ad */
+/* type - bits 0..1 */
+#define WLAN_CAPABILITY_DMG_TYPE_IBSS (1<<0) /* Tx by: STA */
+#define WLAN_CAPABILITY_DMG_TYPE_PBSS (2<<0) /* Tx by: PCP */
+#define WLAN_CAPABILITY_DMG_TYPE_AP (3<<0) /* Tx by: AP */
+
+#define WLAN_CAPABILITY_DMG_CBAP_ONLY (1<<2)
+#define WLAN_CAPABILITY_DMG_CBAP_SOURCE (1<<3)
+#define WLAN_CAPABILITY_DMG_PRIVACY (1<<4)
+#define WLAN_CAPABILITY_DMG_ECPAC (1<<5)
+
+#define WLAN_CAPABILITY_DMG_SPECTRUM_MGMT (1<<8)
+#define WLAN_CAPABILITY_DMG_RADIO_MEASURE (1<<12)
+
/* measurement */
#define IEEE80211_SPCT_MSR_RPRT_MODE_LATE (1<<0)
#define IEEE80211_SPCT_MSR_RPRT_MODE_INCAPABLE (1<<1)
@@ -1133,7 +1163,6 @@ struct ieee80211_ht_operation {
#define IEEE80211_SPCT_MSR_RPRT_TYPE_CCA 1
#define IEEE80211_SPCT_MSR_RPRT_TYPE_RPI 2
-
/* 802.11g ERP information element */
#define WLAN_ERP_NON_ERP_PRESENT (1<<0)
#define WLAN_ERP_USE_PROTECTION (1<<1)
@@ -1145,6 +1174,16 @@ enum {
WLAN_ERP_PREAMBLE_LONG = 1,
};
+/* Band ID, 802.11ad #8.4.1.45 */
+enum {
+ IEEE80211_BANDID_TV_WS = 0, /* TV white spaces */
+ IEEE80211_BANDID_SUB1 = 1, /* Sub-1 GHz (excluding TV white spaces) */
+ IEEE80211_BANDID_2G = 2, /* 2.4 GHz */
+ IEEE80211_BANDID_3G = 3, /* 3.6 GHz */
+ IEEE80211_BANDID_5G = 4, /* 4.9 and 5 GHz */
+ IEEE80211_BANDID_60G = 5, /* 60 GHz */
+};
+
/* Status codes */
enum ieee80211_statuscode {
WLAN_STATUS_SUCCESS = 0,
@@ -1196,6 +1235,17 @@ enum ieee80211_statuscode {
WLAN_STATUS_ANTI_CLOG_REQUIRED = 76,
WLAN_STATUS_FCG_NOT_SUPP = 78,
WLAN_STATUS_STA_NO_TBTT = 78,
+ /* 802.11ad */
+ WLAN_STATUS_REJECTED_WITH_SUGGESTED_CHANGES = 39,
+ WLAN_STATUS_REJECTED_FOR_DELAY_PERIOD = 47,
+ WLAN_STATUS_REJECT_WITH_SCHEDULE = 83,
+ WLAN_STATUS_PENDING_ADMITTING_FST_SESSION = 86,
+ WLAN_STATUS_PERFORMING_FST_NOW = 87,
+ WLAN_STATUS_PENDING_GAP_IN_BA_WINDOW = 88,
+ WLAN_STATUS_REJECT_U_PID_SETTING = 89,
+ WLAN_STATUS_REJECT_DSE_BAND = 96,
+ WLAN_STATUS_DENIED_WITH_SUGGESTED_BAND_AND_CHANNEL = 99,
+ WLAN_STATUS_DENIED_DUE_TO_SPECTRUM_MANAGEMENT = 103,
};
@@ -1352,6 +1402,39 @@ enum ieee80211_eid {
WLAN_EID_DSE_REGISTERED_LOCATION = 58,
WLAN_EID_SUPPORTED_REGULATORY_CLASSES = 59,
WLAN_EID_EXT_CHANSWITCH_ANN = 60,
+ /* 802.11ad */
+ WLAN_EID_NON_TX_BSSID_CAP = 83,
+ WLAN_EID_WAKEUP_SCHEDULE = 143,
+ WLAN_EID_EXT_SCHEDULE = 144,
+ WLAN_EID_STA_AVAILABILITY = 145,
+ WLAN_EID_DMG_TSPEC = 146,
+ WLAN_EID_DMG_AT = 147,
+ WLAN_EID_DMG_CAP = 148,
+ WLAN_EID_DMG_OPERATION = 151,
+ WLAN_EID_DMG_BSS_PARAM_CHANGE = 152,
+ WLAN_EID_DMG_BEAM_REFINEMENT = 153,
+ WLAN_EID_CHANNEL_MEASURE_FEEDBACK = 154,
+ WLAN_EID_AWAKE_WINDOW = 157,
+ WLAN_EID_MULTI_BAND = 158,
+ WLAN_EID_ADDBA_EXT = 159,
+ WLAN_EID_NEXT_PCP_LIST = 160,
+ WLAN_EID_PCP_HANDOVER = 161,
+ WLAN_EID_DMG_LINK_MARGIN = 162,
+ WLAN_EID_SWITCHING_STREAM = 163,
+ WLAN_EID_SESSION_TRANSITION = 164,
+ WLAN_EID_DYN_TONE_PAIRING_REPORT = 165,
+ WLAN_EID_CLUSTER_REPORT = 166,
+ WLAN_EID_RELAY_CAP = 167,
+ WLAN_EID_RELAY_XFER_PARAM_SET = 168,
+ WLAN_EID_BEAM_LINK_MAINT = 169,
+ WLAN_EID_MULTIPLE_MAC_ADDR = 170,
+ WLAN_EID_U_PID = 171,
+ WLAN_EID_DMG_LINK_ADAPT_ACK = 172,
+ WLAN_EID_QUIET_PERIOD_REQ = 175,
+ WLAN_EID_QUIET_PERIOD_RESP = 177,
+ WLAN_EID_EPAC_POLICY = 182,
+ WLAN_EID_CLISTER_TIME_OFF = 183,
+ WLAN_EID_ANTENNA_SECTOR_ID_PATTERN = 190,
};
/* Action category code */
@@ -1368,7 +1451,10 @@ enum ieee80211_category {
WLAN_CATEGORY_MESH_ACTION = 13,
WLAN_CATEGORY_MULTIHOP_ACTION = 14,
WLAN_CATEGORY_SELF_PROTECTED = 15,
+ WLAN_CATEGORY_DMG = 16,
WLAN_CATEGORY_WMM = 17,
+ WLAN_CATEGORY_FST = 18,
+ WLAN_CATEGORY_UNPROT_DMG = 20,
WLAN_CATEGORY_VENDOR_SPECIFIC_PROTECTED = 126,
WLAN_CATEGORY_VENDOR_SPECIFIC = 127,
};
@@ -1616,6 +1702,7 @@ enum ieee80211_sa_query_action {
#define WLAN_CIPHER_SUITE_CCMP 0x000FAC04
#define WLAN_CIPHER_SUITE_WEP104 0x000FAC05
#define WLAN_CIPHER_SUITE_AES_CMAC 0x000FAC06
+#define WLAN_CIPHER_SUITE_GCMP 0x000FAC08
#define WLAN_CIPHER_SUITE_SMS4 0x00147201
--
1.7.9.5
next prev parent reply other threads:[~2012-07-02 6:33 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-02 6:32 [PATCH 60g v2 0/5] Infrastructure for 60g (802.11ad) Vladimir Kondratiev
2012-07-02 6:32 ` [PATCH 60g v2 1/5] wireless: add 802.11ad (60gHz band) Vladimir Kondratiev
2012-07-02 14:22 ` Arik Nemtsov
2012-07-02 15:12 ` Johannes Berg
2012-07-02 15:15 ` Arik Nemtsov
2012-07-02 6:32 ` [PATCH 60g v2 2/5] wireless: rate check logic for 60g Vladimir Kondratiev
2012-07-02 13:02 ` Johannes Berg
2012-07-02 6:32 ` [PATCH 60g v2 3/5] wireless: regulatory " Vladimir Kondratiev
2012-07-02 6:32 ` Vladimir Kondratiev [this message]
2012-07-02 6:32 ` [PATCH 60g v2 5/5] wireless: bitrate calculation " Vladimir Kondratiev
2012-07-02 12:54 ` Johannes Berg
2012-07-02 12:54 ` [PATCH 60g v2 0/5] Infrastructure for 60g (802.11ad) Johannes Berg
2012-07-02 12:58 ` Johannes Berg
2012-07-02 15:01 ` Vladimir Kondratiev
2012-07-02 15:08 ` Johannes Berg
2012-07-03 4:15 ` Julian Calaby
2012-07-03 6:50 ` Johannes Berg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1341210756-11054-5-git-send-email-qca_vkondrat@qca.qualcomm.com \
--to=qca_vkondrat@qca.qualcomm.com \
--cc=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=rodrigue@qca.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.