From: Cyril Chemparathy <cyril@ti.com> To: <linux-arm-kernel@lists.infradead.org> Cc: <linux-kernel@vger.kernel.org>, <nico@linaro.org>, <will.deacon@arm.com>, <catalin.marinas@arm.com>, Cyril Chemparathy <cyril@ti.com>, Vitaly Andrianov <vitalya@ti.com> Subject: [RFC 07/23] ARM: LPAE: use phys_addr_t for membank size Date: Mon, 23 Jul 2012 21:09:09 -0400 [thread overview] Message-ID: <1343092165-9470-8-git-send-email-cyril@ti.com> (raw) In-Reply-To: <1343092165-9470-1-git-send-email-cyril@ti.com> This patch changes the membank structure's size field to phys_addr_t to allow banks larger than 4G. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Vitaly Andrianov <vitalya@ti.com> --- arch/arm/include/asm/setup.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h index 23ebc0c..a2e7581 100644 --- a/arch/arm/include/asm/setup.h +++ b/arch/arm/include/asm/setup.h @@ -195,8 +195,8 @@ static const struct tagtable __tagtable_##fn __tag = { tag, fn } #define NR_BANKS CONFIG_ARM_NR_BANKS struct membank { - phys_addr_t start; - unsigned long size; + phys_addr_t start; + phys_addr_t size; unsigned int highmem; }; -- 1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: cyril@ti.com (Cyril Chemparathy) To: linux-arm-kernel@lists.infradead.org Subject: [RFC 07/23] ARM: LPAE: use phys_addr_t for membank size Date: Tue, 24 Jul 2012 01:10:13 -0000 [thread overview] Message-ID: <1343092165-9470-8-git-send-email-cyril@ti.com> (raw) In-Reply-To: <1343092165-9470-1-git-send-email-cyril@ti.com> This patch changes the membank structure's size field to phys_addr_t to allow banks larger than 4G. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Vitaly Andrianov <vitalya@ti.com> --- arch/arm/include/asm/setup.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h index 23ebc0c..a2e7581 100644 --- a/arch/arm/include/asm/setup.h +++ b/arch/arm/include/asm/setup.h @@ -195,8 +195,8 @@ static const struct tagtable __tagtable_##fn __tag = { tag, fn } #define NR_BANKS CONFIG_ARM_NR_BANKS struct membank { - phys_addr_t start; - unsigned long size; + phys_addr_t start; + phys_addr_t size; unsigned int highmem; }; -- 1.7.9.5
next prev parent reply other threads:[~2012-07-24 1:13 UTC|newest] Thread overview: 88+ messages / expand[flat|nested] mbox.gz Atom feed top 2012-07-24 1:09 [RFC 00/23] Introducing the TI Keystone platform Cyril Chemparathy 2012-07-24 1:09 ` Cyril Chemparathy 2012-07-24 1:09 ` [RFC 01/23] ARM: LPAE: disable phys-to-virt patching on PAE systems Cyril Chemparathy 2012-07-24 1:09 ` Cyril Chemparathy 2012-07-24 9:41 ` Catalin Marinas 2012-07-24 9:41 ` Catalin Marinas 2012-07-24 10:43 ` Cyril Chemparathy 2012-07-24 10:43 ` Cyril Chemparathy 2012-07-24 1:09 ` [RFC 02/23] ARM: LPAE: use signed arithmetic for mask definitions Cyril Chemparathy 2012-07-24 1:09 ` Cyril Chemparathy 2012-07-24 10:05 ` Catalin Marinas 2012-07-24 10:05 ` Catalin Marinas 2012-07-24 10:52 ` Cyril Chemparathy 2012-07-24 10:52 ` Cyril Chemparathy 2012-07-31 15:35 ` Cyril Chemparathy 2012-07-31 15:35 ` Cyril Chemparathy 2012-07-24 1:09 ` [RFC 03/23] ARM: LPAE: use phys_addr_t on virt <--> phys conversion Cyril Chemparathy 2012-07-24 1:10 ` Cyril Chemparathy 2012-07-24 10:37 ` Catalin Marinas 2012-07-24 10:37 ` Catalin Marinas 2012-07-24 10:55 ` Cyril Chemparathy 2012-07-24 10:55 ` Cyril Chemparathy 2012-07-24 11:02 ` Catalin Marinas 2012-07-24 11:02 ` Catalin Marinas 2012-07-24 1:09 ` [RFC 04/23] ARM: LPAE: use phys_addr_t in alloc_init_pud() Cyril Chemparathy 2012-07-24 1:10 ` Cyril Chemparathy 2012-07-24 1:09 ` [RFC 05/23] ARM: LPAE: use phys_addr_t in free_memmap() Cyril Chemparathy 2012-07-24 1:09 ` Cyril Chemparathy 2012-07-24 1:09 ` [RFC 06/23] ARM: LPAE: use phys_addr_t for initrd location and size Cyril Chemparathy 2012-07-24 1:33 ` Cyril Chemparathy 2012-07-24 1:09 ` Cyril Chemparathy [this message] 2012-07-24 1:10 ` [RFC 07/23] ARM: LPAE: use phys_addr_t for membank size Cyril Chemparathy 2012-07-24 10:04 ` Will Deacon 2012-07-24 10:04 ` Will Deacon 2012-07-24 10:46 ` Cyril Chemparathy 2012-07-24 10:46 ` Cyril Chemparathy 2012-07-24 1:09 ` [RFC 08/23] ARM: LPAE: use 64-bit pgd physical address in switch_mm() Cyril Chemparathy 2012-07-24 1:10 ` Cyril Chemparathy 2012-07-24 1:09 ` [RFC 09/23] ARM: LPAE: use 64-bit accessors for TTBR registers Cyril Chemparathy 2012-07-24 1:10 ` Cyril Chemparathy 2012-07-24 1:09 ` [RFC 10/23] ARM: mm: use physical addresses in highmem sanity checks Cyril Chemparathy 2012-07-24 1:10 ` Cyril Chemparathy 2012-07-24 1:09 ` [RFC 11/23] ARM: mm: cleanup checks for membank overlap with vmalloc area Cyril Chemparathy 2012-07-24 1:10 ` Cyril Chemparathy 2012-07-24 1:09 ` [RFC 12/23] ARM: mm: clean up membank size limit checks Cyril Chemparathy 2012-07-24 1:10 ` Cyril Chemparathy 2012-07-24 1:09 ` [RFC 13/23] ARM: LPAE: define ARCH_LOW_ADDRESS_LIMIT for bootmem Cyril Chemparathy 2012-07-24 1:10 ` Cyril Chemparathy 2012-07-24 1:09 ` [RFC 14/23] ARM: LPAE: factor out T1SZ and TTBR1 computations Cyril Chemparathy 2012-07-24 1:38 ` Cyril Chemparathy 2012-07-24 1:09 ` [RFC 15/23] ARM: LPAE: allow proc override of TTB setup Cyril Chemparathy 2012-07-24 1:10 ` Cyril Chemparathy 2012-07-24 1:09 ` [RFC 16/23] ARM: LPAE: accomodate >32-bit addresses for page table base Cyril Chemparathy 2012-07-24 1:10 ` Cyril Chemparathy 2012-07-24 1:09 ` [RFC 17/23] ARM: add machine desc hook for early memory/paging initialization Cyril Chemparathy 2012-07-24 1:10 ` Cyril Chemparathy 2012-07-24 14:32 ` Arnd Bergmann 2012-07-24 14:32 ` Arnd Bergmann 2012-07-24 14:47 ` Cyril Chemparathy 2012-07-24 14:47 ` Cyril Chemparathy 2012-07-24 1:09 ` [RFC 18/23] ARM: add virt_to_idmap for interconnect aliasing Cyril Chemparathy 2012-07-24 1:10 ` Cyril Chemparathy 2012-07-24 1:09 ` [RFC 19/23] drivers: cma: fix addressing on PAE machines Cyril Chemparathy 2012-07-24 1:38 ` Cyril Chemparathy 2012-07-24 1:09 ` [RFC 20/23] mm: bootmem: use phys_addr_t for physical addresses Cyril Chemparathy 2012-07-24 1:10 ` Cyril Chemparathy 2012-07-24 1:09 ` [RFC 21/23] ARM: keystone: introducing TI Keystone platform Cyril Chemparathy 2012-07-24 1:38 ` Cyril Chemparathy 2012-07-24 14:46 ` Arnd Bergmann 2012-07-24 14:46 ` Arnd Bergmann 2012-07-24 17:56 ` Cyril Chemparathy 2012-07-24 17:56 ` Cyril Chemparathy 2012-07-24 18:45 ` Arnd Bergmann 2012-07-24 18:45 ` Arnd Bergmann 2012-07-24 1:09 ` [RFC 22/23] ARM: keystone: enable SMP on Keystone machines Cyril Chemparathy 2012-07-24 1:10 ` Cyril Chemparathy 2012-07-24 1:09 ` [RFC 23/23] ARM: keystone: add switch over to high physical address range Cyril Chemparathy 2012-07-24 1:33 ` Cyril Chemparathy 2012-07-24 9:49 ` Catalin Marinas 2012-07-24 9:49 ` Catalin Marinas 2012-07-24 14:39 ` Arnd Bergmann 2012-07-24 14:39 ` Arnd Bergmann 2012-07-24 14:59 ` Cyril Chemparathy 2012-07-24 14:59 ` Cyril Chemparathy 2012-07-24 9:08 ` [RFC 00/23] Introducing the TI Keystone platform Will Deacon 2012-07-24 9:08 ` Will Deacon 2012-07-24 10:41 ` Cyril Chemparathy 2012-07-24 10:41 ` Cyril Chemparathy
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1343092165-9470-8-git-send-email-cyril@ti.com \ --to=cyril@ti.com \ --cc=catalin.marinas@arm.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=nico@linaro.org \ --cc=vitalya@ti.com \ --cc=will.deacon@arm.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.