From: Pavan Kunapuli <pkunapuli@nvidia.com>
To: swarren@wwwdotorg.org, linux@arm.linux.org.uk, cjb@laptop.org,
linux-tegra@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-mmc@vger.kernel.org
Cc: Pavan Kunapuli <pkunapuli@nvidia.com>
Subject: [PATCH 1/2] ARM: dt: tegra: Add sdhci regulators
Date: Tue, 23 Oct 2012 12:48:59 +0530 [thread overview]
Message-ID: <1350976740-19284-2-git-send-email-pkunapuli@nvidia.com> (raw)
In-Reply-To: <1350976740-19284-1-git-send-email-pkunapuli@nvidia.com>
Adding vmmc and vmmcq supplies for sdhci nodes
in tegra dt files.
Signed-off-by: Pavan Kunapuli <pkunapuli@nvidia.com>
---
arch/arm/boot/dts/tegra20-harmony.dts | 27 ++++++++++++++++++++-
arch/arm/boot/dts/tegra20-paz00.dts | 24 +++++++++++++++++++-
arch/arm/boot/dts/tegra20-seaboard.dts | 35 ++++++++++++++++++++++++++++-
arch/arm/boot/dts/tegra20-tamonten.dtsi | 10 ++++++++
arch/arm/boot/dts/tegra20-ventana.dts | 36 ++++++++++++++++++++++++++++-
arch/arm/boot/dts/tegra20-whistler.dts | 9 +++++-
arch/arm/boot/dts/tegra30-cardhu-a02.dts | 2 +
arch/arm/boot/dts/tegra30-cardhu-a04.dts | 2 +
arch/arm/boot/dts/tegra30-cardhu.dtsi | 19 ++++++++++++++-
9 files changed, 154 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts
index 74b8a47..5b02afe 100644
--- a/arch/arm/boot/dts/tegra20-harmony.dts
+++ b/arch/arm/boot/dts/tegra20-harmony.dts
@@ -419,7 +419,8 @@
status = "okay";
cd-gpios = <&gpio 69 0>; /* gpio PI5 */
wp-gpios = <&gpio 57 0>; /* gpio PH1 */
- power-gpios = <&gpio 155 0>; /* gpio PT3 */
+ vmmc-supply = <&vddio_sd_reg>;
+ vqmmc-supply = <&vddio_sd_reg>;
bus-width = <4>;
};
@@ -427,7 +428,8 @@
status = "okay";
cd-gpios = <&gpio 58 0>; /* gpio PH2 */
wp-gpios = <&gpio 59 0>; /* gpio PH3 */
- power-gpios = <&gpio 70 0>; /* gpio PI6 */
+ vmmc-supply = <&vddio_sdmmc_reg>;
+ vqmmc-supply = <&vddio_sdmmc_reg>;
bus-width = <8>;
};
@@ -495,6 +497,27 @@
gpio = <&gpio 176 0>; /* gpio PW0 */
enable-active-high;
};
+
+ vddio_sdmmc_reg: regulator@6 {
+ compatible = "regulator-fixed";
+ reg = <6>;
+ regulator-name = "vddio_sdmmc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio 70 0>; /* gpio PW0 */
+ enable-active-high;
+ };
+
+ vddio_sd_reg: regulator@7 {
+ compatible = "regulator-fixed";
+ reg = <7>;
+ regulator-name = "vddio_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio 155 0>; /* gpio PW0 */
+ enable-active-high;
+ };
+
};
sound {
diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts
index 6a93d14..e161b65 100644
--- a/arch/arm/boot/dts/tegra20-paz00.dts
+++ b/arch/arm/boot/dts/tegra20-paz00.dts
@@ -422,13 +422,17 @@
status = "okay";
cd-gpios = <&gpio 173 0>; /* gpio PV5 */
wp-gpios = <&gpio 57 0>; /* gpio PH1 */
- power-gpios = <&gpio 169 0>; /* gpio PV1 */
bus-width = <4>;
+ vmmc-supply = <&vddio_sd_reg>;
+ vqmmc-supply = <&vddio_sd_reg>;
+
};
sdhci@c8000600 {
status = "okay";
bus-width = <8>;
+ vmmc-supply = <&vddio_sdmmc_reg>;
+ vqmmc-supply = <&vddio_sdmmc_reg>;
};
gpio-keys {
@@ -465,6 +469,24 @@
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
+
+ vddio_sd_reg: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "vddio_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&gpio 169 0>; /* gpio PV1 */
+ };
+
+ vddio_sdmmc_reg: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "vddio_sdmmc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
};
sound {
diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts
index eafeca6..1b7d692 100644
--- a/arch/arm/boot/dts/tegra20-seaboard.dts
+++ b/arch/arm/boot/dts/tegra20-seaboard.dts
@@ -450,7 +450,7 @@
regulator-always-on;
};
- ldo5 {
+ ldo5_reg: ldo5 {
regulator-name = "vdd_ldo5,vcore_mmc";
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
@@ -565,6 +565,9 @@
status = "okay";
power-gpios = <&gpio 86 0>; /* gpio PK6 */
bus-width = <4>;
+ vmmc-supply = <&vddio_sdmmc_reg>;
+ vqmmc-supply = <&vddio_sdmmc_reg>;
+
};
sdhci@c8000400 {
@@ -573,11 +576,15 @@
wp-gpios = <&gpio 57 0>; /* gpio PH1 */
power-gpios = <&gpio 70 0>; /* gpio PI6 */
bus-width = <4>;
+ vmmc-supply = <&vddio_sd_reg>;
+ vqmmc-supply = <&vddio_sd_reg>;
};
sdhci@c8000600 {
status = "okay";
bus-width = <8>;
+ vmmc-supply = <&ldo5_reg>;
+ vqmmc-supply = <&vddio_nand_reg>;
};
gpio-keys {
@@ -632,6 +639,32 @@
gpio = <&pmic 1 0>;
enable-active-high;
};
+
+ vddio_sd_reg: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "vddio_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio 176 0>; /* gpio PW0 */
+ enable-active-high;
+ };
+
+ vddio_sdmmc_reg: regulator@4 {
+ compatible = "regulator-fixed";
+ reg = <4>;
+ regulator-name = "vddio_sdmmc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vddio_nand_reg: regulator@5 {
+ compatible = "regulator-fixed";
+ reg = <5>;
+ regulator-name = "vddio_nand";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
};
sound {
diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi
index 5b3d8b1..a60e828 100644
--- a/arch/arm/boot/dts/tegra20-tamonten.dtsi
+++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi
@@ -396,6 +396,8 @@
wp-gpios = <&gpio 59 0>; /* gpio PH3 */
bus-width = <4>;
status = "okay";
+ vmmc-supply = <&vddio_sdmmc_reg>;
+ vqmmc-supply = <&vddio_sdmmc_reg>;
};
regulators {
@@ -412,5 +414,13 @@
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
+
+ vddio_sdmmc_reg: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "vddio_sdmmc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
};
};
diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts
index bec8bb2..0210670 100644
--- a/arch/arm/boot/dts/tegra20-ventana.dts
+++ b/arch/arm/boot/dts/tegra20-ventana.dts
@@ -376,7 +376,7 @@
regulator-always-on;
};
- ldo5 {
+ ldo5_reg: ldo5 {
regulator-name = "vdd_ldo5,vcore_mmc";
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
@@ -439,19 +439,24 @@
status = "okay";
power-gpios = <&gpio 86 0>; /* gpio PK6 */
bus-width = <4>;
+ vmmc-supply = <&vddio_sdmmc_reg>;
+ vqmmc-supply = <&vddio_sdmmc_reg>;
};
sdhci@c8000400 {
status = "okay";
cd-gpios = <&gpio 69 0>; /* gpio PI5 */
wp-gpios = <&gpio 57 0>; /* gpio PH1 */
- power-gpios = <&gpio 70 0>; /* gpio PI6 */
bus-width = <4>;
+ vmmc-supply = <&vddio_sd_reg>;
+ vqmmc-supply = <&vddio_sd_reg>;
};
sdhci@c8000600 {
status = "okay";
bus-width = <8>;
+ vmmc-supply = <&ldo5_reg>;
+ vqmmc-supply = <&vddio_nand_reg>;
};
regulators {
@@ -506,6 +511,33 @@
gpio = <&gpio 176 0>; /* gpio PW0 */
enable-active-high;
};
+
+ vddio_sd_reg: regulator@5 {
+ compatible = "regulator-fixed";
+ reg = <5>;
+ regulator-name = "vddio_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio 70 0>; /* gpio PW0 */
+ enable-active-high;
+ };
+
+ vddio_sdmmc_reg: regulator@6 {
+ compatible = "regulator-fixed";
+ reg = <6>;
+ regulator-name = "vddio_sdmmc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vddio_nand_reg: regulator@7 {
+ compatible = "regulator-fixed";
+ reg = <7>;
+ regulator-name = "vddio_nand";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
};
sound {
diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts
index 94a71c9..bdc4918 100644
--- a/arch/arm/boot/dts/tegra20-whistler.dts
+++ b/arch/arm/boot/dts/tegra20-whistler.dts
@@ -349,7 +349,7 @@
regulator-always-on;
};
- ldo5 {
+ ldo5_reg: ldo5 {
regulator-name = "nvvdd_ldo5,vcore_mmc,avdd_lcd1,vddio_1wire";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
@@ -394,7 +394,7 @@
regulator-max-microvolt = <3300000>;
};
- ldo12 {
+ ldo12_reg: ldo12 {
regulator-name = "nvvdd_ldo12,vddio_sdio";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
@@ -496,11 +496,16 @@
status = "okay";
wp-gpios = <&gpio 173 0>; /* gpio PV5 */
bus-width = <8>;
+ vmmc-supply = <&ldo12_reg>;
+ vqmmc-supply = <&ldo12_reg>;
};
sdhci@c8000600 {
status = "okay";
bus-width = <8>;
+ vmmc-supply = <&ldo5_reg>;
+ vqmmc-supply = <&ldo5_reg>;
+
};
regulators {
diff --git a/arch/arm/boot/dts/tegra30-cardhu-a02.dts b/arch/arm/boot/dts/tegra30-cardhu-a02.dts
index adc88aa..697effa 100644
--- a/arch/arm/boot/dts/tegra30-cardhu-a02.dts
+++ b/arch/arm/boot/dts/tegra30-cardhu-a02.dts
@@ -88,6 +88,8 @@
status = "okay";
power-gpios = <&gpio 28 0>; /* gpio PD4 */
bus-width = <4>;
+ vmmc-supply = <&vio_reg>;
+ vqmmc-supply = <&vio_reg>;
};
};
diff --git a/arch/arm/boot/dts/tegra30-cardhu-a04.dts b/arch/arm/boot/dts/tegra30-cardhu-a04.dts
index 08163e1..ee4820a 100644
--- a/arch/arm/boot/dts/tegra30-cardhu-a04.dts
+++ b/arch/arm/boot/dts/tegra30-cardhu-a04.dts
@@ -100,5 +100,7 @@
status = "okay";
power-gpios = <&gpio 27 0>; /* gpio PD3 */
bus-width = <4>;
+ vmmc-supply = <&vio_reg>;
+ vqmmc-supply = <&vio_reg>;
};
};
diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi
index b245e6c..fbf0fae 100644
--- a/arch/arm/boot/dts/tegra30-cardhu.dtsi
+++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi
@@ -247,7 +247,7 @@
ldo5_reg: ldo5 {
regulator-name = "vddio_sdmmc,avdd_vdac";
- regulator-min-microvolt = <3300000>;
+ regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
@@ -290,13 +290,16 @@
status = "okay";
cd-gpios = <&gpio 69 0>; /* gpio PI5 */
wp-gpios = <&gpio 155 0>; /* gpio PT3 */
- power-gpios = <&gpio 31 0>; /* gpio PD7 */
bus-width = <4>;
+ vmmc-supply = <&sdcard_3v3_reg>;
+ vqmmc-supply = <&ldo5_reg>;
};
sdhci@78000600 {
status = "okay";
bus-width = <8>;
+ vmmc-supply = <&emmc_3v3_reg>;
+ vqmmc-supply = <&vio_reg>;
};
regulators {
@@ -451,6 +454,18 @@
gpio-open-drain;
vin-supply = <&vdd_5v0_reg>;
};
+
+ sdcard_3v3_reg: regulator@13 {
+ compatible = "regulator-fixed";
+ reg = <13>;
+ regulator-name = "sdcard_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&gpio 31 0>; /* GPIO PD7 */
+ vin-supply = <&sys_3v3_reg>;
+ };
+
};
sound {
--
1.7.1.1
WARNING: multiple messages have this Message-ID (diff)
From: Pavan Kunapuli <pkunapuli@nvidia.com>
To: <swarren@wwwdotorg.org>, <linux@arm.linux.org.uk>,
<cjb@laptop.org>, <linux-tegra@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <linux-mmc@vger.kernel.org>
Cc: Pavan Kunapuli <pkunapuli@nvidia.com>
Subject: [PATCH 1/2] ARM: dt: tegra: Add sdhci regulators
Date: Tue, 23 Oct 2012 12:48:59 +0530 [thread overview]
Message-ID: <1350976740-19284-2-git-send-email-pkunapuli@nvidia.com> (raw)
In-Reply-To: <1350976740-19284-1-git-send-email-pkunapuli@nvidia.com>
Adding vmmc and vmmcq supplies for sdhci nodes
in tegra dt files.
Signed-off-by: Pavan Kunapuli <pkunapuli@nvidia.com>
---
arch/arm/boot/dts/tegra20-harmony.dts | 27 ++++++++++++++++++++-
arch/arm/boot/dts/tegra20-paz00.dts | 24 +++++++++++++++++++-
arch/arm/boot/dts/tegra20-seaboard.dts | 35 ++++++++++++++++++++++++++++-
arch/arm/boot/dts/tegra20-tamonten.dtsi | 10 ++++++++
arch/arm/boot/dts/tegra20-ventana.dts | 36 ++++++++++++++++++++++++++++-
arch/arm/boot/dts/tegra20-whistler.dts | 9 +++++-
arch/arm/boot/dts/tegra30-cardhu-a02.dts | 2 +
arch/arm/boot/dts/tegra30-cardhu-a04.dts | 2 +
arch/arm/boot/dts/tegra30-cardhu.dtsi | 19 ++++++++++++++-
9 files changed, 154 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts
index 74b8a47..5b02afe 100644
--- a/arch/arm/boot/dts/tegra20-harmony.dts
+++ b/arch/arm/boot/dts/tegra20-harmony.dts
@@ -419,7 +419,8 @@
status = "okay";
cd-gpios = <&gpio 69 0>; /* gpio PI5 */
wp-gpios = <&gpio 57 0>; /* gpio PH1 */
- power-gpios = <&gpio 155 0>; /* gpio PT3 */
+ vmmc-supply = <&vddio_sd_reg>;
+ vqmmc-supply = <&vddio_sd_reg>;
bus-width = <4>;
};
@@ -427,7 +428,8 @@
status = "okay";
cd-gpios = <&gpio 58 0>; /* gpio PH2 */
wp-gpios = <&gpio 59 0>; /* gpio PH3 */
- power-gpios = <&gpio 70 0>; /* gpio PI6 */
+ vmmc-supply = <&vddio_sdmmc_reg>;
+ vqmmc-supply = <&vddio_sdmmc_reg>;
bus-width = <8>;
};
@@ -495,6 +497,27 @@
gpio = <&gpio 176 0>; /* gpio PW0 */
enable-active-high;
};
+
+ vddio_sdmmc_reg: regulator@6 {
+ compatible = "regulator-fixed";
+ reg = <6>;
+ regulator-name = "vddio_sdmmc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio 70 0>; /* gpio PW0 */
+ enable-active-high;
+ };
+
+ vddio_sd_reg: regulator@7 {
+ compatible = "regulator-fixed";
+ reg = <7>;
+ regulator-name = "vddio_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio 155 0>; /* gpio PW0 */
+ enable-active-high;
+ };
+
};
sound {
diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts
index 6a93d14..e161b65 100644
--- a/arch/arm/boot/dts/tegra20-paz00.dts
+++ b/arch/arm/boot/dts/tegra20-paz00.dts
@@ -422,13 +422,17 @@
status = "okay";
cd-gpios = <&gpio 173 0>; /* gpio PV5 */
wp-gpios = <&gpio 57 0>; /* gpio PH1 */
- power-gpios = <&gpio 169 0>; /* gpio PV1 */
bus-width = <4>;
+ vmmc-supply = <&vddio_sd_reg>;
+ vqmmc-supply = <&vddio_sd_reg>;
+
};
sdhci@c8000600 {
status = "okay";
bus-width = <8>;
+ vmmc-supply = <&vddio_sdmmc_reg>;
+ vqmmc-supply = <&vddio_sdmmc_reg>;
};
gpio-keys {
@@ -465,6 +469,24 @@
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
+
+ vddio_sd_reg: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "vddio_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&gpio 169 0>; /* gpio PV1 */
+ };
+
+ vddio_sdmmc_reg: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "vddio_sdmmc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
};
sound {
diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts
index eafeca6..1b7d692 100644
--- a/arch/arm/boot/dts/tegra20-seaboard.dts
+++ b/arch/arm/boot/dts/tegra20-seaboard.dts
@@ -450,7 +450,7 @@
regulator-always-on;
};
- ldo5 {
+ ldo5_reg: ldo5 {
regulator-name = "vdd_ldo5,vcore_mmc";
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
@@ -565,6 +565,9 @@
status = "okay";
power-gpios = <&gpio 86 0>; /* gpio PK6 */
bus-width = <4>;
+ vmmc-supply = <&vddio_sdmmc_reg>;
+ vqmmc-supply = <&vddio_sdmmc_reg>;
+
};
sdhci@c8000400 {
@@ -573,11 +576,15 @@
wp-gpios = <&gpio 57 0>; /* gpio PH1 */
power-gpios = <&gpio 70 0>; /* gpio PI6 */
bus-width = <4>;
+ vmmc-supply = <&vddio_sd_reg>;
+ vqmmc-supply = <&vddio_sd_reg>;
};
sdhci@c8000600 {
status = "okay";
bus-width = <8>;
+ vmmc-supply = <&ldo5_reg>;
+ vqmmc-supply = <&vddio_nand_reg>;
};
gpio-keys {
@@ -632,6 +639,32 @@
gpio = <&pmic 1 0>;
enable-active-high;
};
+
+ vddio_sd_reg: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "vddio_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio 176 0>; /* gpio PW0 */
+ enable-active-high;
+ };
+
+ vddio_sdmmc_reg: regulator@4 {
+ compatible = "regulator-fixed";
+ reg = <4>;
+ regulator-name = "vddio_sdmmc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vddio_nand_reg: regulator@5 {
+ compatible = "regulator-fixed";
+ reg = <5>;
+ regulator-name = "vddio_nand";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
};
sound {
diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi
index 5b3d8b1..a60e828 100644
--- a/arch/arm/boot/dts/tegra20-tamonten.dtsi
+++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi
@@ -396,6 +396,8 @@
wp-gpios = <&gpio 59 0>; /* gpio PH3 */
bus-width = <4>;
status = "okay";
+ vmmc-supply = <&vddio_sdmmc_reg>;
+ vqmmc-supply = <&vddio_sdmmc_reg>;
};
regulators {
@@ -412,5 +414,13 @@
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
+
+ vddio_sdmmc_reg: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "vddio_sdmmc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
};
};
diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts
index bec8bb2..0210670 100644
--- a/arch/arm/boot/dts/tegra20-ventana.dts
+++ b/arch/arm/boot/dts/tegra20-ventana.dts
@@ -376,7 +376,7 @@
regulator-always-on;
};
- ldo5 {
+ ldo5_reg: ldo5 {
regulator-name = "vdd_ldo5,vcore_mmc";
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
@@ -439,19 +439,24 @@
status = "okay";
power-gpios = <&gpio 86 0>; /* gpio PK6 */
bus-width = <4>;
+ vmmc-supply = <&vddio_sdmmc_reg>;
+ vqmmc-supply = <&vddio_sdmmc_reg>;
};
sdhci@c8000400 {
status = "okay";
cd-gpios = <&gpio 69 0>; /* gpio PI5 */
wp-gpios = <&gpio 57 0>; /* gpio PH1 */
- power-gpios = <&gpio 70 0>; /* gpio PI6 */
bus-width = <4>;
+ vmmc-supply = <&vddio_sd_reg>;
+ vqmmc-supply = <&vddio_sd_reg>;
};
sdhci@c8000600 {
status = "okay";
bus-width = <8>;
+ vmmc-supply = <&ldo5_reg>;
+ vqmmc-supply = <&vddio_nand_reg>;
};
regulators {
@@ -506,6 +511,33 @@
gpio = <&gpio 176 0>; /* gpio PW0 */
enable-active-high;
};
+
+ vddio_sd_reg: regulator@5 {
+ compatible = "regulator-fixed";
+ reg = <5>;
+ regulator-name = "vddio_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio 70 0>; /* gpio PW0 */
+ enable-active-high;
+ };
+
+ vddio_sdmmc_reg: regulator@6 {
+ compatible = "regulator-fixed";
+ reg = <6>;
+ regulator-name = "vddio_sdmmc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vddio_nand_reg: regulator@7 {
+ compatible = "regulator-fixed";
+ reg = <7>;
+ regulator-name = "vddio_nand";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
};
sound {
diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts
index 94a71c9..bdc4918 100644
--- a/arch/arm/boot/dts/tegra20-whistler.dts
+++ b/arch/arm/boot/dts/tegra20-whistler.dts
@@ -349,7 +349,7 @@
regulator-always-on;
};
- ldo5 {
+ ldo5_reg: ldo5 {
regulator-name = "nvvdd_ldo5,vcore_mmc,avdd_lcd1,vddio_1wire";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
@@ -394,7 +394,7 @@
regulator-max-microvolt = <3300000>;
};
- ldo12 {
+ ldo12_reg: ldo12 {
regulator-name = "nvvdd_ldo12,vddio_sdio";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
@@ -496,11 +496,16 @@
status = "okay";
wp-gpios = <&gpio 173 0>; /* gpio PV5 */
bus-width = <8>;
+ vmmc-supply = <&ldo12_reg>;
+ vqmmc-supply = <&ldo12_reg>;
};
sdhci@c8000600 {
status = "okay";
bus-width = <8>;
+ vmmc-supply = <&ldo5_reg>;
+ vqmmc-supply = <&ldo5_reg>;
+
};
regulators {
diff --git a/arch/arm/boot/dts/tegra30-cardhu-a02.dts b/arch/arm/boot/dts/tegra30-cardhu-a02.dts
index adc88aa..697effa 100644
--- a/arch/arm/boot/dts/tegra30-cardhu-a02.dts
+++ b/arch/arm/boot/dts/tegra30-cardhu-a02.dts
@@ -88,6 +88,8 @@
status = "okay";
power-gpios = <&gpio 28 0>; /* gpio PD4 */
bus-width = <4>;
+ vmmc-supply = <&vio_reg>;
+ vqmmc-supply = <&vio_reg>;
};
};
diff --git a/arch/arm/boot/dts/tegra30-cardhu-a04.dts b/arch/arm/boot/dts/tegra30-cardhu-a04.dts
index 08163e1..ee4820a 100644
--- a/arch/arm/boot/dts/tegra30-cardhu-a04.dts
+++ b/arch/arm/boot/dts/tegra30-cardhu-a04.dts
@@ -100,5 +100,7 @@
status = "okay";
power-gpios = <&gpio 27 0>; /* gpio PD3 */
bus-width = <4>;
+ vmmc-supply = <&vio_reg>;
+ vqmmc-supply = <&vio_reg>;
};
};
diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi
index b245e6c..fbf0fae 100644
--- a/arch/arm/boot/dts/tegra30-cardhu.dtsi
+++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi
@@ -247,7 +247,7 @@
ldo5_reg: ldo5 {
regulator-name = "vddio_sdmmc,avdd_vdac";
- regulator-min-microvolt = <3300000>;
+ regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
@@ -290,13 +290,16 @@
status = "okay";
cd-gpios = <&gpio 69 0>; /* gpio PI5 */
wp-gpios = <&gpio 155 0>; /* gpio PT3 */
- power-gpios = <&gpio 31 0>; /* gpio PD7 */
bus-width = <4>;
+ vmmc-supply = <&sdcard_3v3_reg>;
+ vqmmc-supply = <&ldo5_reg>;
};
sdhci@78000600 {
status = "okay";
bus-width = <8>;
+ vmmc-supply = <&emmc_3v3_reg>;
+ vqmmc-supply = <&vio_reg>;
};
regulators {
@@ -451,6 +454,18 @@
gpio-open-drain;
vin-supply = <&vdd_5v0_reg>;
};
+
+ sdcard_3v3_reg: regulator@13 {
+ compatible = "regulator-fixed";
+ reg = <13>;
+ regulator-name = "sdcard_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&gpio 31 0>; /* GPIO PD7 */
+ vin-supply = <&sys_3v3_reg>;
+ };
+
};
sound {
--
1.7.1.1
WARNING: multiple messages have this Message-ID (diff)
From: pkunapuli@nvidia.com (Pavan Kunapuli)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] ARM: dt: tegra: Add sdhci regulators
Date: Tue, 23 Oct 2012 12:48:59 +0530 [thread overview]
Message-ID: <1350976740-19284-2-git-send-email-pkunapuli@nvidia.com> (raw)
In-Reply-To: <1350976740-19284-1-git-send-email-pkunapuli@nvidia.com>
Adding vmmc and vmmcq supplies for sdhci nodes
in tegra dt files.
Signed-off-by: Pavan Kunapuli <pkunapuli@nvidia.com>
---
arch/arm/boot/dts/tegra20-harmony.dts | 27 ++++++++++++++++++++-
arch/arm/boot/dts/tegra20-paz00.dts | 24 +++++++++++++++++++-
arch/arm/boot/dts/tegra20-seaboard.dts | 35 ++++++++++++++++++++++++++++-
arch/arm/boot/dts/tegra20-tamonten.dtsi | 10 ++++++++
arch/arm/boot/dts/tegra20-ventana.dts | 36 ++++++++++++++++++++++++++++-
arch/arm/boot/dts/tegra20-whistler.dts | 9 +++++-
arch/arm/boot/dts/tegra30-cardhu-a02.dts | 2 +
arch/arm/boot/dts/tegra30-cardhu-a04.dts | 2 +
arch/arm/boot/dts/tegra30-cardhu.dtsi | 19 ++++++++++++++-
9 files changed, 154 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts
index 74b8a47..5b02afe 100644
--- a/arch/arm/boot/dts/tegra20-harmony.dts
+++ b/arch/arm/boot/dts/tegra20-harmony.dts
@@ -419,7 +419,8 @@
status = "okay";
cd-gpios = <&gpio 69 0>; /* gpio PI5 */
wp-gpios = <&gpio 57 0>; /* gpio PH1 */
- power-gpios = <&gpio 155 0>; /* gpio PT3 */
+ vmmc-supply = <&vddio_sd_reg>;
+ vqmmc-supply = <&vddio_sd_reg>;
bus-width = <4>;
};
@@ -427,7 +428,8 @@
status = "okay";
cd-gpios = <&gpio 58 0>; /* gpio PH2 */
wp-gpios = <&gpio 59 0>; /* gpio PH3 */
- power-gpios = <&gpio 70 0>; /* gpio PI6 */
+ vmmc-supply = <&vddio_sdmmc_reg>;
+ vqmmc-supply = <&vddio_sdmmc_reg>;
bus-width = <8>;
};
@@ -495,6 +497,27 @@
gpio = <&gpio 176 0>; /* gpio PW0 */
enable-active-high;
};
+
+ vddio_sdmmc_reg: regulator at 6 {
+ compatible = "regulator-fixed";
+ reg = <6>;
+ regulator-name = "vddio_sdmmc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio 70 0>; /* gpio PW0 */
+ enable-active-high;
+ };
+
+ vddio_sd_reg: regulator at 7 {
+ compatible = "regulator-fixed";
+ reg = <7>;
+ regulator-name = "vddio_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio 155 0>; /* gpio PW0 */
+ enable-active-high;
+ };
+
};
sound {
diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts
index 6a93d14..e161b65 100644
--- a/arch/arm/boot/dts/tegra20-paz00.dts
+++ b/arch/arm/boot/dts/tegra20-paz00.dts
@@ -422,13 +422,17 @@
status = "okay";
cd-gpios = <&gpio 173 0>; /* gpio PV5 */
wp-gpios = <&gpio 57 0>; /* gpio PH1 */
- power-gpios = <&gpio 169 0>; /* gpio PV1 */
bus-width = <4>;
+ vmmc-supply = <&vddio_sd_reg>;
+ vqmmc-supply = <&vddio_sd_reg>;
+
};
sdhci at c8000600 {
status = "okay";
bus-width = <8>;
+ vmmc-supply = <&vddio_sdmmc_reg>;
+ vqmmc-supply = <&vddio_sdmmc_reg>;
};
gpio-keys {
@@ -465,6 +469,24 @@
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
+
+ vddio_sd_reg: regulator at 1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "vddio_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&gpio 169 0>; /* gpio PV1 */
+ };
+
+ vddio_sdmmc_reg: regulator at 2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "vddio_sdmmc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
};
sound {
diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts
index eafeca6..1b7d692 100644
--- a/arch/arm/boot/dts/tegra20-seaboard.dts
+++ b/arch/arm/boot/dts/tegra20-seaboard.dts
@@ -450,7 +450,7 @@
regulator-always-on;
};
- ldo5 {
+ ldo5_reg: ldo5 {
regulator-name = "vdd_ldo5,vcore_mmc";
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
@@ -565,6 +565,9 @@
status = "okay";
power-gpios = <&gpio 86 0>; /* gpio PK6 */
bus-width = <4>;
+ vmmc-supply = <&vddio_sdmmc_reg>;
+ vqmmc-supply = <&vddio_sdmmc_reg>;
+
};
sdhci at c8000400 {
@@ -573,11 +576,15 @@
wp-gpios = <&gpio 57 0>; /* gpio PH1 */
power-gpios = <&gpio 70 0>; /* gpio PI6 */
bus-width = <4>;
+ vmmc-supply = <&vddio_sd_reg>;
+ vqmmc-supply = <&vddio_sd_reg>;
};
sdhci at c8000600 {
status = "okay";
bus-width = <8>;
+ vmmc-supply = <&ldo5_reg>;
+ vqmmc-supply = <&vddio_nand_reg>;
};
gpio-keys {
@@ -632,6 +639,32 @@
gpio = <&pmic 1 0>;
enable-active-high;
};
+
+ vddio_sd_reg: regulator at 3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "vddio_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio 176 0>; /* gpio PW0 */
+ enable-active-high;
+ };
+
+ vddio_sdmmc_reg: regulator at 4 {
+ compatible = "regulator-fixed";
+ reg = <4>;
+ regulator-name = "vddio_sdmmc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vddio_nand_reg: regulator at 5 {
+ compatible = "regulator-fixed";
+ reg = <5>;
+ regulator-name = "vddio_nand";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
};
sound {
diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi
index 5b3d8b1..a60e828 100644
--- a/arch/arm/boot/dts/tegra20-tamonten.dtsi
+++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi
@@ -396,6 +396,8 @@
wp-gpios = <&gpio 59 0>; /* gpio PH3 */
bus-width = <4>;
status = "okay";
+ vmmc-supply = <&vddio_sdmmc_reg>;
+ vqmmc-supply = <&vddio_sdmmc_reg>;
};
regulators {
@@ -412,5 +414,13 @@
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
+
+ vddio_sdmmc_reg: regulator at 1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "vddio_sdmmc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
};
};
diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts
index bec8bb2..0210670 100644
--- a/arch/arm/boot/dts/tegra20-ventana.dts
+++ b/arch/arm/boot/dts/tegra20-ventana.dts
@@ -376,7 +376,7 @@
regulator-always-on;
};
- ldo5 {
+ ldo5_reg: ldo5 {
regulator-name = "vdd_ldo5,vcore_mmc";
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
@@ -439,19 +439,24 @@
status = "okay";
power-gpios = <&gpio 86 0>; /* gpio PK6 */
bus-width = <4>;
+ vmmc-supply = <&vddio_sdmmc_reg>;
+ vqmmc-supply = <&vddio_sdmmc_reg>;
};
sdhci at c8000400 {
status = "okay";
cd-gpios = <&gpio 69 0>; /* gpio PI5 */
wp-gpios = <&gpio 57 0>; /* gpio PH1 */
- power-gpios = <&gpio 70 0>; /* gpio PI6 */
bus-width = <4>;
+ vmmc-supply = <&vddio_sd_reg>;
+ vqmmc-supply = <&vddio_sd_reg>;
};
sdhci at c8000600 {
status = "okay";
bus-width = <8>;
+ vmmc-supply = <&ldo5_reg>;
+ vqmmc-supply = <&vddio_nand_reg>;
};
regulators {
@@ -506,6 +511,33 @@
gpio = <&gpio 176 0>; /* gpio PW0 */
enable-active-high;
};
+
+ vddio_sd_reg: regulator at 5 {
+ compatible = "regulator-fixed";
+ reg = <5>;
+ regulator-name = "vddio_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio 70 0>; /* gpio PW0 */
+ enable-active-high;
+ };
+
+ vddio_sdmmc_reg: regulator at 6 {
+ compatible = "regulator-fixed";
+ reg = <6>;
+ regulator-name = "vddio_sdmmc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vddio_nand_reg: regulator at 7 {
+ compatible = "regulator-fixed";
+ reg = <7>;
+ regulator-name = "vddio_nand";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
};
sound {
diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts
index 94a71c9..bdc4918 100644
--- a/arch/arm/boot/dts/tegra20-whistler.dts
+++ b/arch/arm/boot/dts/tegra20-whistler.dts
@@ -349,7 +349,7 @@
regulator-always-on;
};
- ldo5 {
+ ldo5_reg: ldo5 {
regulator-name = "nvvdd_ldo5,vcore_mmc,avdd_lcd1,vddio_1wire";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
@@ -394,7 +394,7 @@
regulator-max-microvolt = <3300000>;
};
- ldo12 {
+ ldo12_reg: ldo12 {
regulator-name = "nvvdd_ldo12,vddio_sdio";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
@@ -496,11 +496,16 @@
status = "okay";
wp-gpios = <&gpio 173 0>; /* gpio PV5 */
bus-width = <8>;
+ vmmc-supply = <&ldo12_reg>;
+ vqmmc-supply = <&ldo12_reg>;
};
sdhci at c8000600 {
status = "okay";
bus-width = <8>;
+ vmmc-supply = <&ldo5_reg>;
+ vqmmc-supply = <&ldo5_reg>;
+
};
regulators {
diff --git a/arch/arm/boot/dts/tegra30-cardhu-a02.dts b/arch/arm/boot/dts/tegra30-cardhu-a02.dts
index adc88aa..697effa 100644
--- a/arch/arm/boot/dts/tegra30-cardhu-a02.dts
+++ b/arch/arm/boot/dts/tegra30-cardhu-a02.dts
@@ -88,6 +88,8 @@
status = "okay";
power-gpios = <&gpio 28 0>; /* gpio PD4 */
bus-width = <4>;
+ vmmc-supply = <&vio_reg>;
+ vqmmc-supply = <&vio_reg>;
};
};
diff --git a/arch/arm/boot/dts/tegra30-cardhu-a04.dts b/arch/arm/boot/dts/tegra30-cardhu-a04.dts
index 08163e1..ee4820a 100644
--- a/arch/arm/boot/dts/tegra30-cardhu-a04.dts
+++ b/arch/arm/boot/dts/tegra30-cardhu-a04.dts
@@ -100,5 +100,7 @@
status = "okay";
power-gpios = <&gpio 27 0>; /* gpio PD3 */
bus-width = <4>;
+ vmmc-supply = <&vio_reg>;
+ vqmmc-supply = <&vio_reg>;
};
};
diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi
index b245e6c..fbf0fae 100644
--- a/arch/arm/boot/dts/tegra30-cardhu.dtsi
+++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi
@@ -247,7 +247,7 @@
ldo5_reg: ldo5 {
regulator-name = "vddio_sdmmc,avdd_vdac";
- regulator-min-microvolt = <3300000>;
+ regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
@@ -290,13 +290,16 @@
status = "okay";
cd-gpios = <&gpio 69 0>; /* gpio PI5 */
wp-gpios = <&gpio 155 0>; /* gpio PT3 */
- power-gpios = <&gpio 31 0>; /* gpio PD7 */
bus-width = <4>;
+ vmmc-supply = <&sdcard_3v3_reg>;
+ vqmmc-supply = <&ldo5_reg>;
};
sdhci at 78000600 {
status = "okay";
bus-width = <8>;
+ vmmc-supply = <&emmc_3v3_reg>;
+ vqmmc-supply = <&vio_reg>;
};
regulators {
@@ -451,6 +454,18 @@
gpio-open-drain;
vin-supply = <&vdd_5v0_reg>;
};
+
+ sdcard_3v3_reg: regulator at 13 {
+ compatible = "regulator-fixed";
+ reg = <13>;
+ regulator-name = "sdcard_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&gpio 31 0>; /* GPIO PD7 */
+ vin-supply = <&sys_3v3_reg>;
+ };
+
};
sound {
--
1.7.1.1
next prev parent reply other threads:[~2012-10-23 7:18 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-23 7:18 [PATCH 0/2] mmc: sdhci: Defer probe if regulators are not registered Pavan Kunapuli
2012-10-23 7:18 ` Pavan Kunapuli
2012-10-23 7:18 ` Pavan Kunapuli
2012-10-23 7:18 ` Pavan Kunapuli [this message]
2012-10-23 7:18 ` [PATCH 1/2] ARM: dt: tegra: Add sdhci regulators Pavan Kunapuli
2012-10-23 7:18 ` Pavan Kunapuli
[not found] ` <1350976740-19284-2-git-send-email-pkunapuli-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2012-10-23 18:07 ` Marc Dietrich
2012-10-23 18:07 ` Marc Dietrich
2012-10-23 18:07 ` Marc Dietrich
2012-10-23 18:42 ` Stephen Warren
2012-10-23 18:42 ` Stephen Warren
2012-10-23 18:42 ` Stephen Warren
[not found] ` <5086E503.8090604-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2012-10-23 19:41 ` Marc Dietrich
2012-10-23 19:41 ` Marc Dietrich
2012-10-23 19:41 ` Marc Dietrich
2012-10-23 7:19 ` [PATCH 2/2] mmc: sdhci: Defer probe if regulator_get fails Pavan Kunapuli
2012-10-23 7:19 ` Pavan Kunapuli
2012-10-23 7:19 ` Pavan Kunapuli
2012-10-23 7:57 ` Lucas Stach
2012-10-23 7:57 ` Lucas Stach
2012-10-23 7:57 ` Lucas Stach
2012-10-23 8:16 ` Pavan Kunapuli
2012-10-23 8:16 ` Pavan Kunapuli
2012-10-23 8:16 ` Pavan Kunapuli
2012-10-23 16:29 ` Stephen Warren
2012-10-23 16:29 ` Stephen Warren
2012-10-23 16:29 ` Stephen Warren
2012-10-23 17:07 ` Mark Brown
2012-10-23 17:07 ` Mark Brown
[not found] ` <1350976740-19284-3-git-send-email-pkunapuli-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2012-10-23 13:21 ` Philip Rakity
2012-10-23 13:21 ` Philip Rakity
2012-10-23 13:21 ` Philip Rakity
[not found] ` <4F1DF342-A2C4-434A-B878-A11374089E6E-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2012-10-23 13:36 ` Russell King - ARM Linux
2012-10-23 13:36 ` Russell King - ARM Linux
2012-10-23 13:36 ` Russell King - ARM Linux
-- strict thread matches above, loose matches on Subject: below --
2012-10-23 7:18 [PATCH 0/2] mmc: sdhci: Defer probe if regulators are not registered Pavan Kunapuli
2012-10-23 7:18 ` [PATCH 1/2] ARM: dt: tegra: Add sdhci regulators Pavan Kunapuli
2012-10-23 7:18 ` Pavan Kunapuli
2012-10-23 16:21 ` Stephen Warren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1350976740-19284-2-git-send-email-pkunapuli@nvidia.com \
--to=pkunapuli@nvidia.com \
--cc=cjb@laptop.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=swarren@wwwdotorg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.