All of lore.kernel.org
 help / color / mirror / Atom feed
From: Laxman Dewangan <ldewangan@nvidia.com>
To: akpm@linux-foundation.org, a.zummo@towertech.it
Cc: swarren@wwwdotorg.org, rtc-linux@googlegroups.com,
	linux-tegra@vger.kernel.org, linux-kernel@vger.kernel.org,
	Laxman Dewangan <ldewangan@nvidia.com>
Subject: [PATCH 2/5] rtc: tegra: Use struct dev_pm_ops for power management
Date: Sat, 9 Mar 2013 23:39:46 +0530	[thread overview]
Message-ID: <1362852588-13362-3-git-send-email-ldewangan@nvidia.com> (raw)
In-Reply-To: <1362852588-13362-1-git-send-email-ldewangan@nvidia.com>

Make the Tegra RTC controller driver define its PM callbacks through
a struct dev_pm_ops object rather than by using legacy PM hooks
in struct platform_driver.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
---
 drivers/rtc/rtc-tegra.c |   19 +++++++++----------
 1 files changed, 9 insertions(+), 10 deletions(-)

diff --git a/drivers/rtc/rtc-tegra.c b/drivers/rtc/rtc-tegra.c
index d64cde6..f7718de 100644
--- a/drivers/rtc/rtc-tegra.c
+++ b/drivers/rtc/rtc-tegra.c
@@ -391,10 +391,9 @@ static int __exit tegra_rtc_remove(struct platform_device *pdev)
 }
 
 #ifdef CONFIG_PM_SLEEP
-static int tegra_rtc_suspend(struct platform_device *pdev, pm_message_t state)
+static int tegra_rtc_suspend(struct device *dev)
 {
-	struct device *dev = &pdev->dev;
-	struct tegra_rtc_info *info = platform_get_drvdata(pdev);
+	struct tegra_rtc_info *info = dev_get_drvdata(dev);
 
 	tegra_rtc_wait_while_busy(dev);
 
@@ -416,10 +415,9 @@ static int tegra_rtc_suspend(struct platform_device *pdev, pm_message_t state)
 	return 0;
 }
 
-static int tegra_rtc_resume(struct platform_device *pdev)
+static int tegra_rtc_resume(struct device *dev)
 {
-	struct device *dev = &pdev->dev;
-	struct tegra_rtc_info *info = platform_get_drvdata(pdev);
+	struct tegra_rtc_info *info = dev_get_drvdata(dev);
 
 	dev_vdbg(dev, "Resume (device_may_wakeup=%d)\n",
 		device_may_wakeup(dev));
@@ -431,6 +429,10 @@ static int tegra_rtc_resume(struct platform_device *pdev)
 }
 #endif
 
+static const struct dev_pm_ops tegra_rtc_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(tegra_rtc_suspend, tegra_rtc_resume)
+};
+
 static void tegra_rtc_shutdown(struct platform_device *pdev)
 {
 	dev_vdbg(&pdev->dev, "disabling interrupts.\n");
@@ -445,11 +447,8 @@ static struct platform_driver tegra_rtc_driver = {
 		.name	= "tegra_rtc",
 		.owner	= THIS_MODULE,
 		.of_match_table = tegra_rtc_dt_match,
+		.pm	= &tegra_rtc_pm_ops,
 	},
-#ifdef CONFIG_PM_SLEEP
-	.suspend	= tegra_rtc_suspend,
-	.resume		= tegra_rtc_resume,
-#endif
 };
 
 static int __init tegra_rtc_init(void)
-- 
1.7.1.1

WARNING: multiple messages have this Message-ID (diff)
From: Laxman Dewangan <ldewangan@nvidia.com>
To: <akpm@linux-foundation.org>, <a.zummo@towertech.it>
Cc: <swarren@wwwdotorg.org>, <rtc-linux@googlegroups.com>,
	<linux-tegra@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	Laxman Dewangan <ldewangan@nvidia.com>
Subject: [PATCH 2/5] rtc: tegra: Use struct dev_pm_ops for power management
Date: Sat, 9 Mar 2013 23:39:46 +0530	[thread overview]
Message-ID: <1362852588-13362-3-git-send-email-ldewangan@nvidia.com> (raw)
In-Reply-To: <1362852588-13362-1-git-send-email-ldewangan@nvidia.com>

Make the Tegra RTC controller driver define its PM callbacks through
a struct dev_pm_ops object rather than by using legacy PM hooks
in struct platform_driver.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
---
 drivers/rtc/rtc-tegra.c |   19 +++++++++----------
 1 files changed, 9 insertions(+), 10 deletions(-)

diff --git a/drivers/rtc/rtc-tegra.c b/drivers/rtc/rtc-tegra.c
index d64cde6..f7718de 100644
--- a/drivers/rtc/rtc-tegra.c
+++ b/drivers/rtc/rtc-tegra.c
@@ -391,10 +391,9 @@ static int __exit tegra_rtc_remove(struct platform_device *pdev)
 }
 
 #ifdef CONFIG_PM_SLEEP
-static int tegra_rtc_suspend(struct platform_device *pdev, pm_message_t state)
+static int tegra_rtc_suspend(struct device *dev)
 {
-	struct device *dev = &pdev->dev;
-	struct tegra_rtc_info *info = platform_get_drvdata(pdev);
+	struct tegra_rtc_info *info = dev_get_drvdata(dev);
 
 	tegra_rtc_wait_while_busy(dev);
 
@@ -416,10 +415,9 @@ static int tegra_rtc_suspend(struct platform_device *pdev, pm_message_t state)
 	return 0;
 }
 
-static int tegra_rtc_resume(struct platform_device *pdev)
+static int tegra_rtc_resume(struct device *dev)
 {
-	struct device *dev = &pdev->dev;
-	struct tegra_rtc_info *info = platform_get_drvdata(pdev);
+	struct tegra_rtc_info *info = dev_get_drvdata(dev);
 
 	dev_vdbg(dev, "Resume (device_may_wakeup=%d)\n",
 		device_may_wakeup(dev));
@@ -431,6 +429,10 @@ static int tegra_rtc_resume(struct platform_device *pdev)
 }
 #endif
 
+static const struct dev_pm_ops tegra_rtc_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(tegra_rtc_suspend, tegra_rtc_resume)
+};
+
 static void tegra_rtc_shutdown(struct platform_device *pdev)
 {
 	dev_vdbg(&pdev->dev, "disabling interrupts.\n");
@@ -445,11 +447,8 @@ static struct platform_driver tegra_rtc_driver = {
 		.name	= "tegra_rtc",
 		.owner	= THIS_MODULE,
 		.of_match_table = tegra_rtc_dt_match,
+		.pm	= &tegra_rtc_pm_ops,
 	},
-#ifdef CONFIG_PM_SLEEP
-	.suspend	= tegra_rtc_suspend,
-	.resume		= tegra_rtc_resume,
-#endif
 };
 
 static int __init tegra_rtc_init(void)
-- 
1.7.1.1


  parent reply	other threads:[~2013-03-09 18:09 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-03-09 18:09 [PATCH 0/5] rtc: tegra: cleanups to remove warning/code lines Laxman Dewangan
2013-03-09 18:09 ` Laxman Dewangan
     [not found] ` <1362852588-13362-1-git-send-email-ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-03-09 18:09   ` [PATCH 1/5] rtc: tegra: protect suspend/resume callbacks with CONFIG_PM_SLEEP Laxman Dewangan
2013-03-09 18:09     ` Laxman Dewangan
     [not found]     ` <1362852588-13362-2-git-send-email-ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-03-10 22:30       ` Thierry Reding
2013-03-10 22:30         ` Thierry Reding
2013-03-09 18:09 ` Laxman Dewangan [this message]
2013-03-09 18:09   ` [PATCH 2/5] rtc: tegra: Use struct dev_pm_ops for power management Laxman Dewangan
     [not found]   ` <1362852588-13362-3-git-send-email-ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-03-10 22:32     ` Thierry Reding
2013-03-10 22:32       ` Thierry Reding
2013-03-09 18:09 ` [PATCH 3/5] rtc: tegra: use module_platform_driver_probe for module init/exit Laxman Dewangan
2013-03-09 18:09   ` Laxman Dewangan
     [not found]   ` <1362852588-13362-4-git-send-email-ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-03-10 22:34     ` Thierry Reding
2013-03-10 22:34       ` Thierry Reding
2013-03-11 17:16     ` Stephen Warren
2013-03-11 17:16       ` Stephen Warren
2013-03-11 19:29       ` Laxman Dewangan
     [not found]         ` <513E30A5.8020104-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-03-11 19:46           ` Stephen Warren
2013-03-11 19:46             ` Stephen Warren
2013-03-09 18:09 ` [PATCH 4/5] rtc: tegra: set irq name as device name Laxman Dewangan
2013-03-09 18:09   ` Laxman Dewangan
     [not found]   ` <1362852588-13362-5-git-send-email-ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-03-10 22:34     ` Thierry Reding
2013-03-10 22:34       ` Thierry Reding

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1362852588-13362-3-git-send-email-ldewangan@nvidia.com \
    --to=ldewangan@nvidia.com \
    --cc=a.zummo@towertech.it \
    --cc=akpm@linux-foundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=rtc-linux@googlegroups.com \
    --cc=swarren@wwwdotorg.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.