* [RFC V2 0/2] Enable VHT for non chanctxes drivers
@ 2013-03-19 0:23 Karl Beldan
2013-03-19 0:23 ` [RFC V2 1/2] mac80211: Use a cfg80211_chan_def in ieee80211_hw_conf_chan Karl Beldan
2013-03-19 0:23 ` [RFC V2 2/2] mac80211: Let drivers not supporting channel contexts use VHT Karl Beldan
0 siblings, 2 replies; 15+ messages in thread
From: Karl Beldan @ 2013-03-19 0:23 UTC (permalink / raw)
To: Johannes Berg, Karl Beldan; +Cc: linux-wireless
Johannes, if you could have a look, I included your suggestions.
There is no behavioral differences vs V1 but for the channel switch.
I computed the center_freqs differences to adjust the center_freq{1,2}s.
I know this chswitch part looks bad and won't make it but now I feel like it
is not worse than the HEAD, so don't panic on it ;).
Karl
^ permalink raw reply [flat|nested] 15+ messages in thread* [RFC V2 1/2] mac80211: Use a cfg80211_chan_def in ieee80211_hw_conf_chan 2013-03-19 0:23 [RFC V2 0/2] Enable VHT for non chanctxes drivers Karl Beldan @ 2013-03-19 0:23 ` Karl Beldan 2013-03-19 11:47 ` Mahesh Palivela ` (2 more replies) 2013-03-19 0:23 ` [RFC V2 2/2] mac80211: Let drivers not supporting channel contexts use VHT Karl Beldan 1 sibling, 3 replies; 15+ messages in thread From: Karl Beldan @ 2013-03-19 0:23 UTC (permalink / raw) To: Johannes Berg, Karl Beldan; +Cc: linux-wireless, Karl Beldan From: Karl Beldan <karl.beldan@rivierawaves.com> Drivers that don't use chanctxes cannot perform VHT association because they still use a "backward compatibility" pair of {ieee80211_channel, nl80211_channel_type} in ieee80211_conf and ieee80211_local. FIXME: this only changes mac80211_hwsim for the RFC Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> --- drivers/net/wireless/mac80211_hwsim.c | 44 +++++++++++++++++--------- include/net/mac80211.h | 15 +++++---- net/mac80211/cfg.c | 7 +--- net/mac80211/chan.c | 8 ++--- net/mac80211/ieee80211_i.h | 3 +- net/mac80211/main.c | 55 +++++++++++++++++++-------------- net/mac80211/mlme.c | 20 ++++++++---- net/mac80211/scan.c | 6 ++-- net/mac80211/trace.h | 21 ++++++++----- net/mac80211/tx.c | 4 +- net/mac80211/util.c | 3 +- 11 files changed, 107 insertions(+), 79 deletions(-) diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index 7490c4f..96e75e2 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -1056,11 +1056,13 @@ out: return HRTIMER_NORESTART; } -static const char *hwsim_chantypes[] = { - [NL80211_CHAN_NO_HT] = "noht", - [NL80211_CHAN_HT20] = "ht20", - [NL80211_CHAN_HT40MINUS] = "ht40-", - [NL80211_CHAN_HT40PLUS] = "ht40+", +static const char *hwsim_chanwidth[] = { + [NL80211_CHAN_WIDTH_20_NOHT] = "noht", + [NL80211_CHAN_WIDTH_20] = "ht20", + [NL80211_CHAN_WIDTH_40] = "ht40", + [NL80211_CHAN_WIDTH_80] = "ht80", + [NL80211_CHAN_WIDTH_80P80] = "ht80p80", + [NL80211_CHAN_WIDTH_160] = "ht160", }; static int mac80211_hwsim_config(struct ieee80211_hw *hw, u32 changed) @@ -1074,18 +1076,30 @@ static int mac80211_hwsim_config(struct ieee80211_hw *hw, u32 changed) [IEEE80211_SMPS_DYNAMIC] = "dynamic", }; - wiphy_debug(hw->wiphy, - "%s (freq=%d/%s idle=%d ps=%d smps=%s)\n", - __func__, - conf->channel ? conf->channel->center_freq : 0, - hwsim_chantypes[conf->channel_type], - !!(conf->flags & IEEE80211_CONF_IDLE), - !!(conf->flags & IEEE80211_CONF_PS), - smps_modes[conf->smps_mode]); + if (conf->chandef.chan) + wiphy_debug(hw->wiphy, + "%s (freq=%d(%d - %d)/%s idle=%d ps=%d smps=%s)\n", + __func__, + conf->chandef.chan->center_freq, + conf->chandef.width > NL80211_CHAN_WIDTH_20 ? + conf->chandef.center_freq1 : 0, + conf->chandef.width > NL80211_CHAN_WIDTH_40 ? + conf->chandef.center_freq2 : 0, + hwsim_chanwidth[conf->chandef.width], + !!(conf->flags & IEEE80211_CONF_IDLE), + !!(conf->flags & IEEE80211_CONF_PS), + smps_modes[conf->smps_mode]); + else + wiphy_debug(hw->wiphy, + "%s (freq=0 idle=%d ps=%d smps=%s)\n", + __func__, + !!(conf->flags & IEEE80211_CONF_IDLE), + !!(conf->flags & IEEE80211_CONF_PS), + smps_modes[conf->smps_mode]); data->idle = !!(conf->flags & IEEE80211_CONF_IDLE); - data->channel = conf->channel; + data->channel = conf->chandef.chan; WARN_ON(data->channel && channels > 1); @@ -1271,7 +1285,7 @@ static int mac80211_hwsim_get_survey( return -ENOENT; /* Current channel */ - survey->channel = conf->channel; + survey->channel = conf->chandef.chan; /* * Magically conjured noise level --- this is only ok for simulated hardware. diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 8c0ca11..2eb3de9 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1001,8 +1001,7 @@ struct ieee80211_conf { u8 long_frame_max_tx_count, short_frame_max_tx_count; - struct ieee80211_channel *channel; - enum nl80211_channel_type channel_type; + struct cfg80211_chan_def chandef; bool radar_enabled; enum ieee80211_smps_mode smps_mode; }; @@ -4204,31 +4203,33 @@ void ieee80211_rate_control_unregister(struct rate_control_ops *ops); static inline bool conf_is_ht20(struct ieee80211_conf *conf) { - return conf->channel_type == NL80211_CHAN_HT20; + return conf->chandef.width == NL80211_CHAN_WIDTH_20; } static inline bool conf_is_ht40_minus(struct ieee80211_conf *conf) { - return conf->channel_type == NL80211_CHAN_HT40MINUS; + return conf->chandef.width == NL80211_CHAN_WIDTH_40 && + conf->chandef.center_freq1 < conf->chandef.chan->center_freq; } static inline bool conf_is_ht40_plus(struct ieee80211_conf *conf) { - return conf->channel_type == NL80211_CHAN_HT40PLUS; + return conf->chandef.width == NL80211_CHAN_WIDTH_40 && + conf->chandef.center_freq1 > conf->chandef.chan->center_freq; } static inline bool conf_is_ht40(struct ieee80211_conf *conf) { - return conf_is_ht40_minus(conf) || conf_is_ht40_plus(conf); + return conf->chandef.width == NL80211_CHAN_WIDTH_40; } static inline bool conf_is_ht(struct ieee80211_conf *conf) { - return conf->channel_type != NL80211_CHAN_NO_HT; + return conf->chandef.width != NL80211_CHAN_WIDTH_20_NOHT; } static inline enum nl80211_iftype diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index e5c1441..8a59294 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -805,8 +805,7 @@ static int ieee80211_set_monitor_channel(struct wiphy *wiphy, IEEE80211_CHANCTX_EXCLUSIVE); } } else if (local->open_count == local->monitors) { - local->_oper_channel = chandef->chan; - local->_oper_channel_type = cfg80211_get_chandef_type(chandef); + local->_oper_chandef = *chandef; ieee80211_hw_config(local, 0); } @@ -3360,9 +3359,7 @@ static int ieee80211_cfg_get_channel(struct wiphy *wiphy, if (local->use_chanctx) *chandef = local->monitor_chandef; else - cfg80211_chandef_create(chandef, - local->_oper_channel, - local->_oper_channel_type); + *chandef = local->_oper_chandef; ret = 0; } rcu_read_unlock(); diff --git a/net/mac80211/chan.c b/net/mac80211/chan.c index 78c0d90..c3b9dc7 100644 --- a/net/mac80211/chan.c +++ b/net/mac80211/chan.c @@ -22,7 +22,7 @@ static void ieee80211_change_chanctx(struct ieee80211_local *local, drv_change_chanctx(local, ctx, IEEE80211_CHANCTX_CHANGE_WIDTH); if (!local->use_chanctx) { - local->_oper_channel_type = cfg80211_get_chandef_type(chandef); + local->_oper_chandef = *chandef; ieee80211_hw_config(local, 0); } } @@ -77,9 +77,7 @@ ieee80211_new_chanctx(struct ieee80211_local *local, ctx->mode = mode; if (!local->use_chanctx) { - local->_oper_channel_type = - cfg80211_get_chandef_type(chandef); - local->_oper_channel = chandef->chan; + local->_oper_chandef = *chandef; ieee80211_hw_config(local, 0); } else { err = drv_add_chanctx(local, ctx); @@ -106,7 +104,7 @@ static void ieee80211_free_chanctx(struct ieee80211_local *local, WARN_ON_ONCE(ctx->refcount != 0); if (!local->use_chanctx) { - local->_oper_channel_type = NL80211_CHAN_NO_HT; + local->_oper_chandef.width = NL80211_CHAN_WIDTH_20_NOHT; ieee80211_hw_config(local, 0); } else { drv_remove_chanctx(local, ctx); diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 95beb18..eb84b37 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1022,8 +1022,7 @@ struct ieee80211_local { struct ieee80211_sub_if_data __rcu *scan_sdata; struct ieee80211_channel *csa_channel; /* For backward compatibility only -- do not use */ - struct ieee80211_channel *_oper_channel; - enum nl80211_channel_type _oper_channel_type; + struct cfg80211_chan_def _oper_chandef; /* Temporary remain-on-channel for off-channel operations */ struct ieee80211_channel *tmp_channel; diff --git a/net/mac80211/main.c b/net/mac80211/main.c index eee1768..1da8ce0 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -92,45 +92,54 @@ static void ieee80211_reconfig_filter(struct work_struct *work) ieee80211_configure_filter(local); } +static int ieee80211_chandef_cmp(const struct cfg80211_chan_def *def1, + const struct cfg80211_chan_def *def2) +{ + if (def1->chan != def2->chan || def1->width != def2->width) + return 1; + if (def1->width < NL80211_CHAN_WIDTH_40) + return 0; + if (def1->width != NL80211_CHAN_WIDTH_80P80) + return def1->center_freq1 != def2->center_freq1 || + def1->center_freq2 != def2->center_freq2; + return def1->center_freq1 != def2->center_freq1; +} + static u32 ieee80211_hw_conf_chan(struct ieee80211_local *local) { struct ieee80211_sub_if_data *sdata; - struct ieee80211_channel *chan; + struct cfg80211_chan_def chandef = {}; u32 changed = 0; int power; - enum nl80211_channel_type channel_type; u32 offchannel_flag; offchannel_flag = local->hw.conf.flags & IEEE80211_CONF_OFFCHANNEL; + if (local->scan_channel) { - chan = local->scan_channel; + chandef.chan = local->scan_channel; /* If scanning on oper channel, use whatever channel-type * is currently in use. */ - if (chan == local->_oper_channel) - channel_type = local->_oper_channel_type; + if (chandef.chan == local->_oper_chandef.chan) + chandef = local->_oper_chandef; else - channel_type = NL80211_CHAN_NO_HT; + chandef.width = NL80211_CHAN_WIDTH_20_NOHT; } else if (local->tmp_channel) { - chan = local->tmp_channel; - channel_type = NL80211_CHAN_NO_HT; - } else { - chan = local->_oper_channel; - channel_type = local->_oper_channel_type; - } + chandef.chan = local->tmp_channel; + chandef.width = NL80211_CHAN_WIDTH_20_NOHT; + } else + chandef = local->_oper_chandef; - if (chan != local->_oper_channel || - channel_type != local->_oper_channel_type) + if (ieee80211_chandef_cmp(&chandef, &local->_oper_chandef)) local->hw.conf.flags |= IEEE80211_CONF_OFFCHANNEL; else local->hw.conf.flags &= ~IEEE80211_CONF_OFFCHANNEL; offchannel_flag ^= local->hw.conf.flags & IEEE80211_CONF_OFFCHANNEL; - if (offchannel_flag || chan != local->hw.conf.channel || - channel_type != local->hw.conf.channel_type) { - local->hw.conf.channel = chan; - local->hw.conf.channel_type = channel_type; + if (offchannel_flag || ieee80211_chandef_cmp(&local->hw.conf.chandef, + &local->_oper_chandef)) { + local->hw.conf.chandef = chandef; changed |= IEEE80211_CONF_CHANGE_CHANNEL; } @@ -146,7 +155,7 @@ static u32 ieee80211_hw_conf_chan(struct ieee80211_local *local) changed |= IEEE80211_CONF_CHANGE_SMPS; } - power = chan->max_power; + power = chandef.chan->max_power; rcu_read_lock(); list_for_each_entry_rcu(sdata, &local->interfaces, list) { @@ -738,11 +747,11 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) sband = local->hw.wiphy->bands[band]; if (!sband) continue; - if (!local->use_chanctx && !local->_oper_channel) { + if (!local->use_chanctx && !local->_oper_chandef.chan) { /* init channel we're on */ - local->hw.conf.channel = - local->_oper_channel = &sband->channels[0]; - local->hw.conf.channel_type = NL80211_CHAN_NO_HT; + local->hw.conf.chandef.chan = + local->_oper_chandef.chan = &sband->channels[0]; + local->hw.conf.chandef.width = NL80211_CHAN_NO_HT; } cfg80211_chandef_create(&local->monitor_chandef, &sband->channels[0], diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index fdc06e3..17b9c15 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -985,7 +985,9 @@ static void ieee80211_chswitch_work(struct work_struct *work) { struct ieee80211_sub_if_data *sdata = container_of(work, struct ieee80211_sub_if_data, u.mgd.chswitch_work); + struct ieee80211_local *local = sdata->local; struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; + int cfreq_off; if (!ieee80211_sdata_running(sdata)) return; @@ -994,21 +996,25 @@ static void ieee80211_chswitch_work(struct work_struct *work) if (!ifmgd->associated) goto out; - sdata->local->_oper_channel = sdata->local->csa_channel; - if (!sdata->local->ops->channel_switch) { + cfreq_off = local->csa_channel->center_freq - + local->_oper_chandef.chan->center_freq; + + local->_oper_chandef.center_freq1 += cfreq_off; + local->_oper_chandef.center_freq2 += cfreq_off; + local->_oper_chandef.chan = local->csa_channel; + if (!local->ops->channel_switch) { /* call "hw_config" only if doing sw channel switch */ - ieee80211_hw_config(sdata->local, - IEEE80211_CONF_CHANGE_CHANNEL); + ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL); } else { /* update the device channel directly */ - sdata->local->hw.conf.channel = sdata->local->_oper_channel; + local->hw.conf.chandef = local->_oper_chandef; } /* XXX: shouldn't really modify cfg80211-owned data! */ - ifmgd->associated->channel = sdata->local->_oper_channel; + ifmgd->associated->channel = local->_oper_chandef.chan; /* XXX: wait for a beacon first? */ - ieee80211_wake_queues_by_reason(&sdata->local->hw, + ieee80211_wake_queues_by_reason(&local->hw, IEEE80211_QUEUE_STOP_REASON_CSA); out: ifmgd->flags &= ~IEEE80211_STA_CSA_RECEIVED; diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index 5dc17c6..11cab5c 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -384,7 +384,7 @@ static void ieee80211_scan_state_send_probe(struct ieee80211_local *local, { int i; struct ieee80211_sub_if_data *sdata; - enum ieee80211_band band = local->hw.conf.channel->band; + enum ieee80211_band band = local->hw.conf.chandef.chan->band; u32 tx_flags; tx_flags = IEEE80211_TX_INTFL_OFFCHAN_TX_OK; @@ -401,7 +401,7 @@ static void ieee80211_scan_state_send_probe(struct ieee80211_local *local, local->scan_req->ssids[i].ssid_len, local->scan_req->ie, local->scan_req->ie_len, local->scan_req->rates[band], false, - tx_flags, local->hw.conf.channel, true); + tx_flags, local->hw.conf.chandef.chan, true); /* * After sending probe requests, wait for probe responses @@ -467,7 +467,7 @@ static int __ieee80211_start_scan(struct ieee80211_sub_if_data *sdata, if (local->ops->hw_scan) { __set_bit(SCAN_HW_SCANNING, &local->scanning); } else if ((req->n_channels == 1) && - (req->channels[0] == local->_oper_channel)) { + (req->channels[0] == local->_oper_chandef.chan)) { /* * If we are scanning only on the operating channel * then we do not need to stop normal activities diff --git a/net/mac80211/trace.h b/net/mac80211/trace.h index e7db2b8..be358cd 100644 --- a/net/mac80211/trace.h +++ b/net/mac80211/trace.h @@ -269,7 +269,6 @@ DEFINE_EVENT(local_sdata_addr_evt, drv_remove_interface, struct ieee80211_sub_if_data *sdata), TP_ARGS(local, sdata) ); - TRACE_EVENT(drv_config, TP_PROTO(struct ieee80211_local *local, u32 changed), @@ -286,8 +285,10 @@ TRACE_EVENT(drv_config, __field(u16, listen_interval) __field(u8, long_frame_max_tx_count) __field(u8, short_frame_max_tx_count) - __field(int, center_freq) - __field(int, channel_type) + __field(int, control_freq) + __field(int, center_freq1) + __field(int, center_freq2) + __field(int, chan_width) __field(int, smps) ), @@ -303,15 +304,19 @@ TRACE_EVENT(drv_config, local->hw.conf.long_frame_max_tx_count; __entry->short_frame_max_tx_count = local->hw.conf.short_frame_max_tx_count; - __entry->center_freq = local->hw.conf.channel ? - local->hw.conf.channel->center_freq : 0; - __entry->channel_type = local->hw.conf.channel_type; + __entry->control_freq = local->hw.conf.chandef.chan ? + local->hw.conf.chandef.chan->center_freq : 0; + __entry->center_freq1 = local->hw.conf.chandef.chan ? + local->hw.conf.chandef.center_freq1 : 0; + __entry->center_freq2 = local->hw.conf.chandef.chan ? + local->hw.conf.chandef.center_freq2 : 0; + __entry->chan_width = local->hw.conf.chandef.width; __entry->smps = local->hw.conf.smps_mode; ), TP_printk( - LOCAL_PR_FMT " ch:%#x freq:%d", - LOCAL_PR_ARG, __entry->changed, __entry->center_freq + LOCAL_PR_FMT " ch:%#x" CHANDEF_PR_FMT, + LOCAL_PR_ARG, __entry->changed, CHANDEF_PR_ARG ) ); diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 3fcdf21..90988c0 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -1708,7 +1708,7 @@ netdev_tx_t ieee80211_monitor_start_xmit(struct sk_buff *skb, if (chanctx_conf) chan = chanctx_conf->def.chan; else if (!local->use_chanctx) - chan = local->_oper_channel; + chan = local->_oper_chandef.chan; else goto fail_rcu; @@ -1842,7 +1842,7 @@ netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb, * This is the exception! WDS style interfaces are prohibited * when channel contexts are in used so this must be valid */ - band = local->hw.conf.channel->band; + band = local->hw.conf.chandef.chan->band; break; #ifdef CONFIG_MAC80211_MESH case NL80211_IFTYPE_MESH_POINT: diff --git a/net/mac80211/util.c b/net/mac80211/util.c index b7a856e..5d1fbb2 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -2137,8 +2137,7 @@ void ieee80211_dfs_radar_detected_work(struct work_struct *work) /* currently not handled */ WARN_ON(1); else { - cfg80211_chandef_create(&chandef, local->hw.conf.channel, - local->hw.conf.channel_type); + chandef = local->hw.conf.chandef; cfg80211_radar_event(local->hw.wiphy, &chandef, GFP_KERNEL); } } -- 1.7.9.dirty ^ permalink raw reply related [flat|nested] 15+ messages in thread
* Re: [RFC V2 1/2] mac80211: Use a cfg80211_chan_def in ieee80211_hw_conf_chan 2013-03-19 0:23 ` [RFC V2 1/2] mac80211: Use a cfg80211_chan_def in ieee80211_hw_conf_chan Karl Beldan @ 2013-03-19 11:47 ` Mahesh Palivela 2013-03-19 12:28 ` Karl Beldan 2013-03-22 10:49 ` Karl Beldan 2013-03-22 10:55 ` Johannes Berg 2 siblings, 1 reply; 15+ messages in thread From: Mahesh Palivela @ 2013-03-19 11:47 UTC (permalink / raw) To: Karl Beldan; +Cc: Johannes Berg, linux-wireless, Karl Beldan On Tue, 2013-03-19 at 01:23 +0100, Karl Beldan wrote: > From: Karl Beldan <karl.beldan@rivierawaves.com> > > Drivers that don't use chanctxes cannot perform VHT association because > they still use a "backward compatibility" pair of {ieee80211_channel, > nl80211_channel_type} in ieee80211_conf and ieee80211_local. > > FIXME: this only changes mac80211_hwsim for the RFC > > Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> > --- > drivers/net/wireless/mac80211_hwsim.c | 44 +++++++++++++++++--------- > include/net/mac80211.h | 15 +++++---- > net/mac80211/cfg.c | 7 +--- > net/mac80211/chan.c | 8 ++--- > net/mac80211/ieee80211_i.h | 3 +- > net/mac80211/main.c | 55 +++++++++++++++++++-------------- > net/mac80211/mlme.c | 20 ++++++++---- > net/mac80211/scan.c | 6 ++-- > net/mac80211/trace.h | 21 ++++++++----- > net/mac80211/tx.c | 4 +- > net/mac80211/util.c | 3 +- > 11 files changed, 107 insertions(+), 79 deletions(-) > > diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c > index 7490c4f..96e75e2 100644 > --- a/drivers/net/wireless/mac80211_hwsim.c > +++ b/drivers/net/wireless/mac80211_hwsim.c > @@ -1056,11 +1056,13 @@ out: > return HRTIMER_NORESTART; > } > > -static const char *hwsim_chantypes[] = { > - [NL80211_CHAN_NO_HT] = "noht", > - [NL80211_CHAN_HT20] = "ht20", > - [NL80211_CHAN_HT40MINUS] = "ht40-", > - [NL80211_CHAN_HT40PLUS] = "ht40+", > +static const char *hwsim_chanwidth[] = { > + [NL80211_CHAN_WIDTH_20_NOHT] = "noht", > + [NL80211_CHAN_WIDTH_20] = "ht20", > + [NL80211_CHAN_WIDTH_40] = "ht40", > + [NL80211_CHAN_WIDTH_80] = "ht80", better we call as vht80 instead of ht80. ditto below.. > + [NL80211_CHAN_WIDTH_80P80] = "ht80p80", > + [NL80211_CHAN_WIDTH_160] = "ht160", > }; > > + cfreq_off = local->csa_channel->center_freq - > + local->_oper_chandef.chan->center_freq; > + > + local->_oper_chandef.center_freq1 += cfreq_off; > + local->_oper_chandef.center_freq2 += cfreq_off; can't add cfreq_off to center_freq2. Add only in case of non-zero center_freq2? > + loca ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [RFC V2 1/2] mac80211: Use a cfg80211_chan_def in ieee80211_hw_conf_chan 2013-03-19 11:47 ` Mahesh Palivela @ 2013-03-19 12:28 ` Karl Beldan 2013-03-19 18:27 ` Johannes Berg 2013-03-20 3:46 ` Mahesh Palivela 0 siblings, 2 replies; 15+ messages in thread From: Karl Beldan @ 2013-03-19 12:28 UTC (permalink / raw) To: Mahesh Palivela; +Cc: Johannes Berg, linux-wireless, Karl Beldan On Tue, Mar 19, 2013 at 05:17:06PM +0530, Mahesh Palivela wrote: > On Tue, 2013-03-19 at 01:23 +0100, Karl Beldan wrote: > > From: Karl Beldan <karl.beldan@rivierawaves.com> > > > > Drivers that don't use chanctxes cannot perform VHT association because > > they still use a "backward compatibility" pair of {ieee80211_channel, > > nl80211_channel_type} in ieee80211_conf and ieee80211_local. > > > > FIXME: this only changes mac80211_hwsim for the RFC > > > > Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> > > --- > > drivers/net/wireless/mac80211_hwsim.c | 44 +++++++++++++++++--------- > > include/net/mac80211.h | 15 +++++---- > > net/mac80211/cfg.c | 7 +--- > > net/mac80211/chan.c | 8 ++--- > > net/mac80211/ieee80211_i.h | 3 +- > > net/mac80211/main.c | 55 +++++++++++++++++++-------------- > > net/mac80211/mlme.c | 20 ++++++++---- > > net/mac80211/scan.c | 6 ++-- > > net/mac80211/trace.h | 21 ++++++++----- > > net/mac80211/tx.c | 4 +- > > net/mac80211/util.c | 3 +- > > 11 files changed, 107 insertions(+), 79 deletions(-) > > > > diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c > > index 7490c4f..96e75e2 100644 > > --- a/drivers/net/wireless/mac80211_hwsim.c > > +++ b/drivers/net/wireless/mac80211_hwsim.c > > @@ -1056,11 +1056,13 @@ out: > > return HRTIMER_NORESTART; > > } > > > > -static const char *hwsim_chantypes[] = { > > - [NL80211_CHAN_NO_HT] = "noht", > > - [NL80211_CHAN_HT20] = "ht20", > > - [NL80211_CHAN_HT40MINUS] = "ht40-", > > - [NL80211_CHAN_HT40PLUS] = "ht40+", > > +static const char *hwsim_chanwidth[] = { > > + [NL80211_CHAN_WIDTH_20_NOHT] = "noht", > > + [NL80211_CHAN_WIDTH_20] = "ht20", > > + [NL80211_CHAN_WIDTH_40] = "ht40", > > + [NL80211_CHAN_WIDTH_80] = "ht80", > > better we call as vht80 instead of ht80. ditto below.. > Yes > > + [NL80211_CHAN_WIDTH_80P80] = "ht80p80", > > + [NL80211_CHAN_WIDTH_160] = "ht160", > > }; > > > > > + cfreq_off = local->csa_channel->center_freq - > > + local->_oper_chandef.chan->center_freq; > > + > > + local->_oper_chandef.center_freq1 += cfreq_off; > > + local->_oper_chandef.center_freq2 += cfreq_off; > > can't add cfreq_off to center_freq2. Add only in case of non-zero > center_freq2? > At first I was like "why ?", but I hadn't spotted the places where we only check for "center_freq2 != 0". Thanks Mahesh, Have you tested vht with this ? Karl ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [RFC V2 1/2] mac80211: Use a cfg80211_chan_def in ieee80211_hw_conf_chan 2013-03-19 12:28 ` Karl Beldan @ 2013-03-19 18:27 ` Johannes Berg 2013-03-20 3:46 ` Mahesh Palivela 1 sibling, 0 replies; 15+ messages in thread From: Johannes Berg @ 2013-03-19 18:27 UTC (permalink / raw) To: Karl Beldan; +Cc: Mahesh Palivela, linux-wireless, Karl Beldan On Tue, 2013-03-19 at 13:28 +0100, Karl Beldan wrote: > > > + cfreq_off = local->csa_channel->center_freq - > > > + local->_oper_chandef.chan->center_freq; > > > + > > > + local->_oper_chandef.center_freq1 += cfreq_off; > > > + local->_oper_chandef.center_freq2 += cfreq_off; > > > > can't add cfreq_off to center_freq2. Add only in case of non-zero > > center_freq2? Yeah this is certainly not right ... anyway no driver supports 80+80 now, so no harm done, but anyway I don't really like any of this. We really need to handle extended chanswitch ... Maybe we should just disconnect entirely (like we do for chanctx today) if we have a channel that's wider than 20 MHz, since we don't handle chanswitch properly. johannes ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [RFC V2 1/2] mac80211: Use a cfg80211_chan_def in ieee80211_hw_conf_chan 2013-03-19 12:28 ` Karl Beldan 2013-03-19 18:27 ` Johannes Berg @ 2013-03-20 3:46 ` Mahesh Palivela 2013-03-20 10:53 ` Mahesh Palivela 1 sibling, 1 reply; 15+ messages in thread From: Mahesh Palivela @ 2013-03-20 3:46 UTC (permalink / raw) To: Karl Beldan; +Cc: Johannes Berg, linux-wireless, Karl Beldan On Tue, 2013-03-19 at 13:28 +0100, Karl Beldan wrote: > On Tue, Mar 19, 2013 at 05:17:06PM +0530, Mahesh Palivela wrote: > > On Tue, 2013-03-19 at 01:23 +0100, Karl Beldan wrote: > > > From: Karl Beldan <karl.beldan@rivierawaves.com> > > > + local->_oper_chandef.center_freq1 += cfreq_off; > > > + local->_oper_chandef.center_freq2 += cfreq_off; > > > > can't add cfreq_off to center_freq2. Add only in case of non-zero > > center_freq2? > > > At first I was like "why ?", but I hadn't spotted the places where we > only check for "center_freq2 != 0". > > > Thanks Mahesh, Have you tested vht with this ? Not yet Karl. I will give it a try and update you. Thanks, Mahesh ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [RFC V2 1/2] mac80211: Use a cfg80211_chan_def in ieee80211_hw_conf_chan 2013-03-20 3:46 ` Mahesh Palivela @ 2013-03-20 10:53 ` Mahesh Palivela 2013-03-20 12:29 ` Karl Beldan 0 siblings, 1 reply; 15+ messages in thread From: Mahesh Palivela @ 2013-03-20 10:53 UTC (permalink / raw) To: Karl Beldan; +Cc: linux-wireless, Karl Beldan On Wed, 2013-03-20 at 09:16 +0530, Mahesh Palivela wrote: > On Tue, 2013-03-19 at 13:28 +0100, Karl Beldan wrote: > > On Tue, Mar 19, 2013 at 05:17:06PM +0530, Mahesh Palivela wrote: > > > On Tue, 2013-03-19 at 01:23 +0100, Karl Beldan wrote: > > > > From: Karl Beldan <karl.beldan@rivierawaves.com> > > > > > + local->_oper_chandef.center_freq1 += cfreq_off; > > > > + local->_oper_chandef.center_freq2 += cfreq_off; > > > > > > can't add cfreq_off to center_freq2. Add only in case of non-zero > > > center_freq2? > > > > > At first I was like "why ?", but I hadn't spotted the places where we > > only check for "center_freq2 != 0". > > > > > > Thanks Mahesh, Have you tested vht with this ? > > Not yet Karl. I will give it a try and update you. > Karl, Is this patch based on mac80211-next kernel? I see failures/hunks when apply your patch. -- Thanks, Mahesh > -- > To unsubscribe from this list: send the line "unsubscribe linux-wireless" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [RFC V2 1/2] mac80211: Use a cfg80211_chan_def in ieee80211_hw_conf_chan 2013-03-20 10:53 ` Mahesh Palivela @ 2013-03-20 12:29 ` Karl Beldan 2013-03-21 11:19 ` Mahesh Palivela 0 siblings, 1 reply; 15+ messages in thread From: Karl Beldan @ 2013-03-20 12:29 UTC (permalink / raw) To: Mahesh Palivela; +Cc: linux-wireless, Karl Beldan On Wed, Mar 20, 2013 at 04:23:16PM +0530, Mahesh Palivela wrote: > On Wed, 2013-03-20 at 09:16 +0530, Mahesh Palivela wrote: > > On Tue, 2013-03-19 at 13:28 +0100, Karl Beldan wrote: > > > On Tue, Mar 19, 2013 at 05:17:06PM +0530, Mahesh Palivela wrote: > > > > On Tue, 2013-03-19 at 01:23 +0100, Karl Beldan wrote: > > > > > From: Karl Beldan <karl.beldan@rivierawaves.com> > > > > > > > + local->_oper_chandef.center_freq1 += cfreq_off; > > > > > + local->_oper_chandef.center_freq2 += cfreq_off; > > > > > > > > can't add cfreq_off to center_freq2. Add only in case of non-zero > > > > center_freq2? > > > > > > > At first I was like "why ?", but I hadn't spotted the places where we > > > only check for "center_freq2 != 0". > > > > > > > > > Thanks Mahesh, Have you tested vht with this ? > > > > Not yet Karl. I will give it a try and update you. > > > > Karl, Is this patch based on mac80211-next kernel? I see failures/hunks > when apply your patch. > It is based on mac80211-next yes. I did it Sunday so it applies properly @ddbfe86 and does so up to 445ea4e^1, (445ea4e was Tuesday). Karl ^ permalink raw reply [flat|nested] 15+ messages in thread
* RE: [RFC V2 1/2] mac80211: Use a cfg80211_chan_def in ieee80211_hw_conf_chan 2013-03-20 12:29 ` Karl Beldan @ 2013-03-21 11:19 ` Mahesh Palivela 0 siblings, 0 replies; 15+ messages in thread From: Mahesh Palivela @ 2013-03-21 11:19 UTC (permalink / raw) To: Karl Beldan; +Cc: linux-wireless, Karl Beldan Karl, It didn't work. Anyways I will wait till its published to kernel. Thanks, Mahesh ________________________________________ From: Karl Beldan [karl.beldan@gmail.com] Sent: Wednesday, March 20, 2013 5:59 PM To: Mahesh Palivela Cc: linux-wireless; Karl Beldan Subject: Re: [RFC V2 1/2] mac80211: Use a cfg80211_chan_def in ieee80211_hw_conf_chan On Wed, Mar 20, 2013 at 04:23:16PM +0530, Mahesh Palivela wrote: > On Wed, 2013-03-20 at 09:16 +0530, Mahesh Palivela wrote: > > On Tue, 2013-03-19 at 13:28 +0100, Karl Beldan wrote: > > > On Tue, Mar 19, 2013 at 05:17:06PM +0530, Mahesh Palivela wrote: > > > > On Tue, 2013-03-19 at 01:23 +0100, Karl Beldan wrote: > > > > > From: Karl Beldan <karl.beldan@rivierawaves.com> > > > > > > > + local->_oper_chandef.center_freq1 += cfreq_off; > > > > > + local->_oper_chandef.center_freq2 += cfreq_off; > > > > > > > > can't add cfreq_off to center_freq2. Add only in case of non-zero > > > > center_freq2? > > > > > > > At first I was like "why ?", but I hadn't spotted the places where we > > > only check for "center_freq2 != 0". > > > > > > > > > Thanks Mahesh, Have you tested vht with this ? > > > > Not yet Karl. I will give it a try and update you. > > > > Karl, Is this patch based on mac80211-next kernel? I see failures/hunks > when apply your patch. > It is based on mac80211-next yes. I did it Sunday so it applies properly @ddbfe86 and does so up to 445ea4e^1, (445ea4e was Tuesday). Karl ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [RFC V2 1/2] mac80211: Use a cfg80211_chan_def in ieee80211_hw_conf_chan 2013-03-19 0:23 ` [RFC V2 1/2] mac80211: Use a cfg80211_chan_def in ieee80211_hw_conf_chan Karl Beldan 2013-03-19 11:47 ` Mahesh Palivela @ 2013-03-22 10:49 ` Karl Beldan 2013-03-22 10:55 ` Johannes Berg 2 siblings, 0 replies; 15+ messages in thread From: Karl Beldan @ 2013-03-22 10:49 UTC (permalink / raw) To: Johannes Berg; +Cc: linux-wireless, Karl Beldan On Tue, Mar 19, 2013 at 01:23:19AM +0100, Karl Beldan wrote: > From: Karl Beldan <karl.beldan@rivierawaves.com> > > Drivers that don't use chanctxes cannot perform VHT association because > they still use a "backward compatibility" pair of {ieee80211_channel, > nl80211_channel_type} in ieee80211_conf and ieee80211_local. > > FIXME: this only changes mac80211_hwsim for the RFC > > Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> > --- > drivers/net/wireless/mac80211_hwsim.c | 44 +++++++++++++++++--------- > include/net/mac80211.h | 15 +++++---- > net/mac80211/cfg.c | 7 +--- > net/mac80211/chan.c | 8 ++--- > net/mac80211/ieee80211_i.h | 3 +- > net/mac80211/main.c | 55 +++++++++++++++++++-------------- > net/mac80211/mlme.c | 20 ++++++++---- > net/mac80211/scan.c | 6 ++-- > net/mac80211/trace.h | 21 ++++++++----- > net/mac80211/tx.c | 4 +- > net/mac80211/util.c | 3 +- > 11 files changed, 107 insertions(+), 79 deletions(-) > > diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c > index 7490c4f..96e75e2 100644 > --- a/drivers/net/wireless/mac80211_hwsim.c > +++ b/drivers/net/wireless/mac80211_hwsim.c > @@ -1056,11 +1056,13 @@ out: > return HRTIMER_NORESTART; > } > > -static const char *hwsim_chantypes[] = { > - [NL80211_CHAN_NO_HT] = "noht", > - [NL80211_CHAN_HT20] = "ht20", > - [NL80211_CHAN_HT40MINUS] = "ht40-", > - [NL80211_CHAN_HT40PLUS] = "ht40+", > +static const char *hwsim_chanwidth[] = { > + [NL80211_CHAN_WIDTH_20_NOHT] = "noht", > + [NL80211_CHAN_WIDTH_20] = "ht20", > + [NL80211_CHAN_WIDTH_40] = "ht40", > + [NL80211_CHAN_WIDTH_80] = "ht80", > + [NL80211_CHAN_WIDTH_80P80] = "ht80p80", > + [NL80211_CHAN_WIDTH_160] = "ht160", > }; > > static int mac80211_hwsim_config(struct ieee80211_hw *hw, u32 changed) > @@ -1074,18 +1076,30 @@ static int mac80211_hwsim_config(struct ieee80211_hw *hw, u32 changed) > [IEEE80211_SMPS_DYNAMIC] = "dynamic", > }; > > - wiphy_debug(hw->wiphy, > - "%s (freq=%d/%s idle=%d ps=%d smps=%s)\n", > - __func__, > - conf->channel ? conf->channel->center_freq : 0, > - hwsim_chantypes[conf->channel_type], > - !!(conf->flags & IEEE80211_CONF_IDLE), > - !!(conf->flags & IEEE80211_CONF_PS), > - smps_modes[conf->smps_mode]); > + if (conf->chandef.chan) > + wiphy_debug(hw->wiphy, > + "%s (freq=%d(%d - %d)/%s idle=%d ps=%d smps=%s)\n", > + __func__, > + conf->chandef.chan->center_freq, > + conf->chandef.width > NL80211_CHAN_WIDTH_20 ? > + conf->chandef.center_freq1 : 0, > + conf->chandef.width > NL80211_CHAN_WIDTH_40 ? > + conf->chandef.center_freq2 : 0, > + hwsim_chanwidth[conf->chandef.width], > + !!(conf->flags & IEEE80211_CONF_IDLE), > + !!(conf->flags & IEEE80211_CONF_PS), > + smps_modes[conf->smps_mode]); > + else > + wiphy_debug(hw->wiphy, > + "%s (freq=0 idle=%d ps=%d smps=%s)\n", > + __func__, > + !!(conf->flags & IEEE80211_CONF_IDLE), > + !!(conf->flags & IEEE80211_CONF_PS), > + smps_modes[conf->smps_mode]); > > data->idle = !!(conf->flags & IEEE80211_CONF_IDLE); > > - data->channel = conf->channel; > + data->channel = conf->chandef.chan; > > WARN_ON(data->channel && channels > 1); > > @@ -1271,7 +1285,7 @@ static int mac80211_hwsim_get_survey( > return -ENOENT; > > /* Current channel */ > - survey->channel = conf->channel; > + survey->channel = conf->chandef.chan; > > /* > * Magically conjured noise level --- this is only ok for simulated hardware. > diff --git a/include/net/mac80211.h b/include/net/mac80211.h > index 8c0ca11..2eb3de9 100644 > --- a/include/net/mac80211.h > +++ b/include/net/mac80211.h > @@ -1001,8 +1001,7 @@ struct ieee80211_conf { > > u8 long_frame_max_tx_count, short_frame_max_tx_count; > > - struct ieee80211_channel *channel; > - enum nl80211_channel_type channel_type; > + struct cfg80211_chan_def chandef; > bool radar_enabled; > enum ieee80211_smps_mode smps_mode; > }; > @@ -4204,31 +4203,33 @@ void ieee80211_rate_control_unregister(struct rate_control_ops *ops); > static inline bool > conf_is_ht20(struct ieee80211_conf *conf) > { > - return conf->channel_type == NL80211_CHAN_HT20; > + return conf->chandef.width == NL80211_CHAN_WIDTH_20; > } > > static inline bool > conf_is_ht40_minus(struct ieee80211_conf *conf) > { > - return conf->channel_type == NL80211_CHAN_HT40MINUS; > + return conf->chandef.width == NL80211_CHAN_WIDTH_40 && > + conf->chandef.center_freq1 < conf->chandef.chan->center_freq; > } > > static inline bool > conf_is_ht40_plus(struct ieee80211_conf *conf) > { > - return conf->channel_type == NL80211_CHAN_HT40PLUS; > + return conf->chandef.width == NL80211_CHAN_WIDTH_40 && > + conf->chandef.center_freq1 > conf->chandef.chan->center_freq; > } > > static inline bool > conf_is_ht40(struct ieee80211_conf *conf) > { > - return conf_is_ht40_minus(conf) || conf_is_ht40_plus(conf); > + return conf->chandef.width == NL80211_CHAN_WIDTH_40; > } > > static inline bool > conf_is_ht(struct ieee80211_conf *conf) > { > - return conf->channel_type != NL80211_CHAN_NO_HT; > + return conf->chandef.width != NL80211_CHAN_WIDTH_20_NOHT; > } > > static inline enum nl80211_iftype > diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c > index e5c1441..8a59294 100644 > --- a/net/mac80211/cfg.c > +++ b/net/mac80211/cfg.c > @@ -805,8 +805,7 @@ static int ieee80211_set_monitor_channel(struct wiphy *wiphy, > IEEE80211_CHANCTX_EXCLUSIVE); > } > } else if (local->open_count == local->monitors) { > - local->_oper_channel = chandef->chan; > - local->_oper_channel_type = cfg80211_get_chandef_type(chandef); > + local->_oper_chandef = *chandef; > ieee80211_hw_config(local, 0); > } > > @@ -3360,9 +3359,7 @@ static int ieee80211_cfg_get_channel(struct wiphy *wiphy, > if (local->use_chanctx) > *chandef = local->monitor_chandef; > else > - cfg80211_chandef_create(chandef, > - local->_oper_channel, > - local->_oper_channel_type); > + *chandef = local->_oper_chandef; > ret = 0; > } > rcu_read_unlock(); > diff --git a/net/mac80211/chan.c b/net/mac80211/chan.c > index 78c0d90..c3b9dc7 100644 > --- a/net/mac80211/chan.c > +++ b/net/mac80211/chan.c > @@ -22,7 +22,7 @@ static void ieee80211_change_chanctx(struct ieee80211_local *local, > drv_change_chanctx(local, ctx, IEEE80211_CHANCTX_CHANGE_WIDTH); > > if (!local->use_chanctx) { > - local->_oper_channel_type = cfg80211_get_chandef_type(chandef); > + local->_oper_chandef = *chandef; > ieee80211_hw_config(local, 0); > } > } > @@ -77,9 +77,7 @@ ieee80211_new_chanctx(struct ieee80211_local *local, > ctx->mode = mode; > > if (!local->use_chanctx) { > - local->_oper_channel_type = > - cfg80211_get_chandef_type(chandef); > - local->_oper_channel = chandef->chan; > + local->_oper_chandef = *chandef; > ieee80211_hw_config(local, 0); > } else { > err = drv_add_chanctx(local, ctx); > @@ -106,7 +104,7 @@ static void ieee80211_free_chanctx(struct ieee80211_local *local, > WARN_ON_ONCE(ctx->refcount != 0); > > if (!local->use_chanctx) { > - local->_oper_channel_type = NL80211_CHAN_NO_HT; > + local->_oper_chandef.width = NL80211_CHAN_WIDTH_20_NOHT; > ieee80211_hw_config(local, 0); > } else { > drv_remove_chanctx(local, ctx); > diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h > index 95beb18..eb84b37 100644 > --- a/net/mac80211/ieee80211_i.h > +++ b/net/mac80211/ieee80211_i.h > @@ -1022,8 +1022,7 @@ struct ieee80211_local { > struct ieee80211_sub_if_data __rcu *scan_sdata; > struct ieee80211_channel *csa_channel; > /* For backward compatibility only -- do not use */ > - struct ieee80211_channel *_oper_channel; > - enum nl80211_channel_type _oper_channel_type; > + struct cfg80211_chan_def _oper_chandef; > > /* Temporary remain-on-channel for off-channel operations */ > struct ieee80211_channel *tmp_channel; > diff --git a/net/mac80211/main.c b/net/mac80211/main.c > index eee1768..1da8ce0 100644 > --- a/net/mac80211/main.c > +++ b/net/mac80211/main.c > @@ -92,45 +92,54 @@ static void ieee80211_reconfig_filter(struct work_struct *work) > ieee80211_configure_filter(local); > } > > +static int ieee80211_chandef_cmp(const struct cfg80211_chan_def *def1, > + const struct cfg80211_chan_def *def2) > +{ > + if (def1->chan != def2->chan || def1->width != def2->width) > + return 1; > + if (def1->width < NL80211_CHAN_WIDTH_40) > + return 0; > + if (def1->width != NL80211_CHAN_WIDTH_80P80) > + return def1->center_freq1 != def2->center_freq1 || > + def1->center_freq2 != def2->center_freq2; > + return def1->center_freq1 != def2->center_freq1; > +} > + > static u32 ieee80211_hw_conf_chan(struct ieee80211_local *local) > { > struct ieee80211_sub_if_data *sdata; > - struct ieee80211_channel *chan; > + struct cfg80211_chan_def chandef = {}; > u32 changed = 0; > int power; > - enum nl80211_channel_type channel_type; > u32 offchannel_flag; > > offchannel_flag = local->hw.conf.flags & IEEE80211_CONF_OFFCHANNEL; > + > if (local->scan_channel) { > - chan = local->scan_channel; > + chandef.chan = local->scan_channel; > /* If scanning on oper channel, use whatever channel-type > * is currently in use. > */ > - if (chan == local->_oper_channel) > - channel_type = local->_oper_channel_type; > + if (chandef.chan == local->_oper_chandef.chan) > + chandef = local->_oper_chandef; > else > - channel_type = NL80211_CHAN_NO_HT; > + chandef.width = NL80211_CHAN_WIDTH_20_NOHT; > } else if (local->tmp_channel) { > - chan = local->tmp_channel; > - channel_type = NL80211_CHAN_NO_HT; > - } else { > - chan = local->_oper_channel; > - channel_type = local->_oper_channel_type; > - } > + chandef.chan = local->tmp_channel; > + chandef.width = NL80211_CHAN_WIDTH_20_NOHT; > + } else > + chandef = local->_oper_chandef; > > - if (chan != local->_oper_channel || > - channel_type != local->_oper_channel_type) > + if (ieee80211_chandef_cmp(&chandef, &local->_oper_chandef)) > local->hw.conf.flags |= IEEE80211_CONF_OFFCHANNEL; > else > local->hw.conf.flags &= ~IEEE80211_CONF_OFFCHANNEL; > > offchannel_flag ^= local->hw.conf.flags & IEEE80211_CONF_OFFCHANNEL; > > - if (offchannel_flag || chan != local->hw.conf.channel || > - channel_type != local->hw.conf.channel_type) { > - local->hw.conf.channel = chan; > - local->hw.conf.channel_type = channel_type; > + if (offchannel_flag || ieee80211_chandef_cmp(&local->hw.conf.chandef, > + &local->_oper_chandef)) { > + local->hw.conf.chandef = chandef; > changed |= IEEE80211_CONF_CHANGE_CHANNEL; > } > > @@ -146,7 +155,7 @@ static u32 ieee80211_hw_conf_chan(struct ieee80211_local *local) > changed |= IEEE80211_CONF_CHANGE_SMPS; > } > > - power = chan->max_power; > + power = chandef.chan->max_power; > > rcu_read_lock(); > list_for_each_entry_rcu(sdata, &local->interfaces, list) { > @@ -738,11 +747,11 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) > sband = local->hw.wiphy->bands[band]; > if (!sband) > continue; > - if (!local->use_chanctx && !local->_oper_channel) { > + if (!local->use_chanctx && !local->_oper_chandef.chan) { > /* init channel we're on */ > - local->hw.conf.channel = > - local->_oper_channel = &sband->channels[0]; > - local->hw.conf.channel_type = NL80211_CHAN_NO_HT; > + local->hw.conf.chandef.chan = > + local->_oper_chandef.chan = &sband->channels[0]; > + local->hw.conf.chandef.width = NL80211_CHAN_NO_HT; > } > cfg80211_chandef_create(&local->monitor_chandef, > &sband->channels[0], It is better if I change it for: - if (!local->use_chanctx && !local->_oper_channel) { + if (!local->use_chanctx && !local->_oper_chandef.chan) { /* init channel we're on */ - local->hw.conf.channel = - local->_oper_channel = &sband->channels[0]; - local->hw.conf.channel_type = NL80211_CHAN_NO_HT; + struct cfg80211_chan_def init_chandef = { + .chan = &sband->channels[0], + .width = NL80211_CHAN_NO_HT, + .center_freq1 = 0, + .center_freq2 = 0 + }; + local->hw.conf.chandef = local->_oper_chandef = init_chandef; Karl ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [RFC V2 1/2] mac80211: Use a cfg80211_chan_def in ieee80211_hw_conf_chan 2013-03-19 0:23 ` [RFC V2 1/2] mac80211: Use a cfg80211_chan_def in ieee80211_hw_conf_chan Karl Beldan 2013-03-19 11:47 ` Mahesh Palivela 2013-03-22 10:49 ` Karl Beldan @ 2013-03-22 10:55 ` Johannes Berg 2013-03-22 13:50 ` Karl Beldan 2 siblings, 1 reply; 15+ messages in thread From: Johannes Berg @ 2013-03-22 10:55 UTC (permalink / raw) To: Karl Beldan; +Cc: linux-wireless, Karl Beldan On Tue, 2013-03-19 at 01:23 +0100, Karl Beldan wrote: > @@ -106,7 +104,7 @@ static void ieee80211_free_chanctx(struct ieee80211_local *local, > WARN_ON_ONCE(ctx->refcount != 0); > > if (!local->use_chanctx) { > - local->_oper_channel_type = NL80211_CHAN_NO_HT; > + local->_oper_chandef.width = NL80211_CHAN_WIDTH_20_NOHT; > ieee80211_hw_config(local, 0); You also have to reset center_freq1/2 here to make it a valid chandef in all cases, otherwise you can end up with e.g. "2412 noht20 2422 0" which makes no sense. I think it'd be worth sticking a WARN_ON(!cfg80211_chandef_valid(...)) into ieee80211_hw_conf_chan(). > --- a/net/mac80211/main.c > +++ b/net/mac80211/main.c > @@ -92,45 +92,54 @@ static void ieee80211_reconfig_filter(struct work_struct *work) > ieee80211_configure_filter(local); > } > > +static int ieee80211_chandef_cmp(const struct cfg80211_chan_def *def1, > + const struct cfg80211_chan_def *def2) Shouldn't be needed? > - local->hw.conf.channel = > - local->_oper_channel = &sband->channels[0]; > - local->hw.conf.channel_type = NL80211_CHAN_NO_HT; > + local->hw.conf.chandef.chan = > + local->_oper_chandef.chan = &sband->channels[0]; > + local->hw.conf.chandef.width = NL80211_CHAN_NO_HT; wrong constant > +++ b/net/mac80211/mlme.c > @@ -985,7 +985,9 @@ static void ieee80211_chswitch_work(struct work_struct *work) > { > struct ieee80211_sub_if_data *sdata = > container_of(work, struct ieee80211_sub_if_data, u.mgd.chswitch_work); > + struct ieee80211_local *local = sdata->local; > struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; > + int cfreq_off; > > if (!ieee80211_sdata_running(sdata)) > return; > @@ -994,21 +996,25 @@ static void ieee80211_chswitch_work(struct work_struct *work) > if (!ifmgd->associated) > goto out; > > - sdata->local->_oper_channel = sdata->local->csa_channel; > - if (!sdata->local->ops->channel_switch) { > + cfreq_off = local->csa_channel->center_freq - > + local->_oper_chandef.chan->center_freq; > + > + local->_oper_chandef.center_freq1 += cfreq_off; > + local->_oper_chandef.center_freq2 += cfreq_off; Adjusting the center_freq1 is quite clearly wrong. :-) Besides, it might not even be supported by the driver. Since we really don't handle anything but 20 MHz channel switches correctly, maybe we should just disconnect in that case, like we do in the chanctx case today. I'd prefer that as a separate patch (coming before this one) though. Of course, patches to make it handle it correctly would also be welcome -- I started playing with it here: http://git.kernel.org/cgit/linux/kernel/git/jberg/mac80211-next.git/commit/?h=wip&id=cb0308430993e96c79b3449cf0b3c744ef62b50e (and the parent commit) > +++ b/net/mac80211/trace.h > @@ -269,7 +269,6 @@ DEFINE_EVENT(local_sdata_addr_evt, drv_remove_interface, > struct ieee80211_sub_if_data *sdata), > TP_ARGS(local, sdata) > ); > - > TRACE_EVENT(drv_config, please keep that :-) > TP_PROTO(struct ieee80211_local *local, > u32 changed), > @@ -286,8 +285,10 @@ TRACE_EVENT(drv_config, > __field(u16, listen_interval) > __field(u8, long_frame_max_tx_count) > __field(u8, short_frame_max_tx_count) > - __field(int, center_freq) > - __field(int, channel_type) > + __field(int, control_freq) > + __field(int, center_freq1) > + __field(int, center_freq2) > + __field(int, chan_width) There should be ready macros for chandef tracing -- can you use them? > + LOCAL_PR_FMT " ch:%#x" CHANDEF_PR_FMT, > + LOCAL_PR_ARG, __entry->changed, CHANDEF_PR_ARG Hm so you used some? Why not all? johannes ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [RFC V2 1/2] mac80211: Use a cfg80211_chan_def in ieee80211_hw_conf_chan 2013-03-22 10:55 ` Johannes Berg @ 2013-03-22 13:50 ` Karl Beldan 2013-03-22 14:12 ` Karl Beldan 2013-03-22 14:21 ` Johannes Berg 0 siblings, 2 replies; 15+ messages in thread From: Karl Beldan @ 2013-03-22 13:50 UTC (permalink / raw) To: Johannes Berg; +Cc: linux-wireless, Karl Beldan On Fri, Mar 22, 2013 at 11:55:37AM +0100, Johannes Berg wrote: > On Tue, 2013-03-19 at 01:23 +0100, Karl Beldan wrote: > > > @@ -106,7 +104,7 @@ static void ieee80211_free_chanctx(struct ieee80211_local *local, > > WARN_ON_ONCE(ctx->refcount != 0); > > > > if (!local->use_chanctx) { > > - local->_oper_channel_type = NL80211_CHAN_NO_HT; > > + local->_oper_chandef.width = NL80211_CHAN_WIDTH_20_NOHT; > > ieee80211_hw_config(local, 0); > > You also have to reset center_freq1/2 here to make it a valid chandef in > all cases, otherwise you can end up with e.g. "2412 noht20 2422 0" which > makes no sense. > > I think it'd be worth sticking a > > WARN_ON(!cfg80211_chandef_valid(...)) > > into ieee80211_hw_conf_chan(). > I addressed the reset of center_freq{1,2} when I understood how we handle them, will add the WARN_ON. > > --- a/net/mac80211/main.c > > +++ b/net/mac80211/main.c > > @@ -92,45 +92,54 @@ static void ieee80211_reconfig_filter(struct work_struct *work) > > ieee80211_configure_filter(local); > > } > > > > +static int ieee80211_chandef_cmp(const struct cfg80211_chan_def *def1, > > + const struct cfg80211_chan_def *def2) > > Shouldn't be needed? > > > - local->hw.conf.channel = > > - local->_oper_channel = &sband->channels[0]; > > - local->hw.conf.channel_type = NL80211_CHAN_NO_HT; > > + local->hw.conf.chandef.chan = > > + local->_oper_chandef.chan = &sband->channels[0]; > > + local->hw.conf.chandef.width = NL80211_CHAN_NO_HT; > > wrong constant > Above issues already addressed. > > +++ b/net/mac80211/mlme.c > > @@ -985,7 +985,9 @@ static void ieee80211_chswitch_work(struct work_struct *work) > > { > > struct ieee80211_sub_if_data *sdata = > > container_of(work, struct ieee80211_sub_if_data, u.mgd.chswitch_work); > > + struct ieee80211_local *local = sdata->local; > > struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; > > + int cfreq_off; > > > > if (!ieee80211_sdata_running(sdata)) > > return; > > @@ -994,21 +996,25 @@ static void ieee80211_chswitch_work(struct work_struct *work) > > if (!ifmgd->associated) > > goto out; > > > > - sdata->local->_oper_channel = sdata->local->csa_channel; > > - if (!sdata->local->ops->channel_switch) { > > + cfreq_off = local->csa_channel->center_freq - > > + local->_oper_chandef.chan->center_freq; > > + > > + local->_oper_chandef.center_freq1 += cfreq_off; > > + local->_oper_chandef.center_freq2 += cfreq_off; > > Adjusting the center_freq1 is quite clearly wrong. :-) > > Besides, it might not even be supported by the driver. > Yes, the next serie will downgrade to NL80211_CHAN_WIDTH_20_NOHT. I know this is not acceptable, I will get back to this very soon. > Since we really don't handle anything but 20 MHz channel switches > correctly, maybe we should just disconnect in that case, like we do in > the chanctx case today. I'd prefer that as a separate patch (coming > before this one) though. > > Of course, patches to make it handle it correctly would also be welcome > -- I started playing with it here: > > http://git.kernel.org/cgit/linux/kernel/git/jberg/mac80211-next.git/commit/?h=wip&id=cb0308430993e96c79b3449cf0b3c744ef62b50e > > (and the parent commit) > Ok, thanks ! I should get back to this very soon. > > +++ b/net/mac80211/trace.h > > @@ -269,7 +269,6 @@ DEFINE_EVENT(local_sdata_addr_evt, drv_remove_interface, > > struct ieee80211_sub_if_data *sdata), > > TP_ARGS(local, sdata) > > ); > > - > > TRACE_EVENT(drv_config, > > please keep that :-) > Oops, did it again. > > TP_PROTO(struct ieee80211_local *local, > > u32 changed), > > @@ -286,8 +285,10 @@ TRACE_EVENT(drv_config, > > __field(u16, listen_interval) > > __field(u8, long_frame_max_tx_count) > > __field(u8, short_frame_max_tx_count) > > - __field(int, center_freq) > > - __field(int, channel_type) > > + __field(int, control_freq) > > + __field(int, center_freq1) > > + __field(int, center_freq2) > > + __field(int, chan_width) > > There should be ready macros for chandef tracing -- can you use them? > > > + LOCAL_PR_FMT " ch:%#x" CHANDEF_PR_FMT, > > + LOCAL_PR_ARG, __entry->changed, CHANDEF_PR_ARG > > Hm so you used some? Why not all? > I would have liked to use CHANDEF_ENTRY and CHANDEF_ASSIGN but they don't check for "chandef.chan != NULL" which would Oops when using chanctxes (and I hesitated to make it too invasive although I would gladly add the check if that doesn't bother you. Thanks for your feedback. Karl ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [RFC V2 1/2] mac80211: Use a cfg80211_chan_def in ieee80211_hw_conf_chan 2013-03-22 13:50 ` Karl Beldan @ 2013-03-22 14:12 ` Karl Beldan 2013-03-22 14:21 ` Johannes Berg 1 sibling, 0 replies; 15+ messages in thread From: Karl Beldan @ 2013-03-22 14:12 UTC (permalink / raw) To: Johannes Berg; +Cc: linux-wireless, Karl Beldan On Fri, Mar 22, 2013 at 02:50:38PM +0100, Karl Beldan wrote: > On Fri, Mar 22, 2013 at 11:55:37AM +0100, Johannes Berg wrote: > > On Tue, 2013-03-19 at 01:23 +0100, Karl Beldan wrote: > > > > > @@ -106,7 +104,7 @@ static void ieee80211_free_chanctx(struct ieee80211_local *local, > > > WARN_ON_ONCE(ctx->refcount != 0); > > > > > > if (!local->use_chanctx) { > > > - local->_oper_channel_type = NL80211_CHAN_NO_HT; > > > + local->_oper_chandef.width = NL80211_CHAN_WIDTH_20_NOHT; > > > ieee80211_hw_config(local, 0); > > > > You also have to reset center_freq1/2 here to make it a valid chandef in > > all cases, otherwise you can end up with e.g. "2412 noht20 2422 0" which > > makes no sense. > > > > I think it'd be worth sticking a > > > > WARN_ON(!cfg80211_chandef_valid(...)) > > > > into ieee80211_hw_conf_chan(). > > > I addressed the reset of center_freq{1,2} when I understood how we > handle them, will add the WARN_ON. > > > > --- a/net/mac80211/main.c > > > +++ b/net/mac80211/main.c > > > @@ -92,45 +92,54 @@ static void ieee80211_reconfig_filter(struct work_struct *work) > > > ieee80211_configure_filter(local); > > > } > > > > > > +static int ieee80211_chandef_cmp(const struct cfg80211_chan_def *def1, > > > + const struct cfg80211_chan_def *def2) > > > > Shouldn't be needed? > > > > > - local->hw.conf.channel = > > > - local->_oper_channel = &sband->channels[0]; > > > - local->hw.conf.channel_type = NL80211_CHAN_NO_HT; > > > + local->hw.conf.chandef.chan = > > > + local->_oper_chandef.chan = &sband->channels[0]; > > > + local->hw.conf.chandef.width = NL80211_CHAN_NO_HT; > > > > wrong constant > > > > Above issues already addressed. > > > > +++ b/net/mac80211/mlme.c > > > @@ -985,7 +985,9 @@ static void ieee80211_chswitch_work(struct work_struct *work) > > > { > > > struct ieee80211_sub_if_data *sdata = > > > container_of(work, struct ieee80211_sub_if_data, u.mgd.chswitch_work); > > > + struct ieee80211_local *local = sdata->local; > > > struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; > > > + int cfreq_off; > > > > > > if (!ieee80211_sdata_running(sdata)) > > > return; > > > @@ -994,21 +996,25 @@ static void ieee80211_chswitch_work(struct work_struct *work) > > > if (!ifmgd->associated) > > > goto out; > > > > > > - sdata->local->_oper_channel = sdata->local->csa_channel; > > > - if (!sdata->local->ops->channel_switch) { > > > + cfreq_off = local->csa_channel->center_freq - > > > + local->_oper_chandef.chan->center_freq; > > > + > > > + local->_oper_chandef.center_freq1 += cfreq_off; > > > + local->_oper_chandef.center_freq2 += cfreq_off; > > > > Adjusting the center_freq1 is quite clearly wrong. :-) > > > > Besides, it might not even be supported by the driver. > > > Yes, the next serie will downgrade to NL80211_CHAN_WIDTH_20_NOHT. > I know this is not acceptable, I will get back to this very soon. > > > Since we really don't handle anything but 20 MHz channel switches > > correctly, maybe we should just disconnect in that case, like we do in > > the chanctx case today. I'd prefer that as a separate patch (coming > > before this one) though. > > > > Of course, patches to make it handle it correctly would also be welcome > > -- I started playing with it here: > > > > http://git.kernel.org/cgit/linux/kernel/git/jberg/mac80211-next.git/commit/?h=wip&id=cb0308430993e96c79b3449cf0b3c744ef62b50e > > > > (and the parent commit) > > > Ok, thanks ! > I should get back to this very soon. > > > > +++ b/net/mac80211/trace.h > > > @@ -269,7 +269,6 @@ DEFINE_EVENT(local_sdata_addr_evt, drv_remove_interface, > > > struct ieee80211_sub_if_data *sdata), > > > TP_ARGS(local, sdata) > > > ); > > > - > > > TRACE_EVENT(drv_config, > > > > please keep that :-) > > > Oops, did it again. > > > > TP_PROTO(struct ieee80211_local *local, > > > u32 changed), > > > @@ -286,8 +285,10 @@ TRACE_EVENT(drv_config, > > > __field(u16, listen_interval) > > > __field(u8, long_frame_max_tx_count) > > > __field(u8, short_frame_max_tx_count) > > > - __field(int, center_freq) > > > - __field(int, channel_type) > > > + __field(int, control_freq) > > > + __field(int, center_freq1) > > > + __field(int, center_freq2) > > > + __field(int, chan_width) > > > > There should be ready macros for chandef tracing -- can you use them? > > > > > + LOCAL_PR_FMT " ch:%#x" CHANDEF_PR_FMT, > > > + LOCAL_PR_ARG, __entry->changed, CHANDEF_PR_ARG > > > > Hm so you used some? Why not all? > > > I would have liked to use CHANDEF_ENTRY and CHANDEF_ASSIGN but they > don't check for "chandef.chan != NULL" which would Oops when using In fact I could have used CHANDEF_ENTRY, I will adjust CHANDEF_ASSIGN to check for ""chandef.chan != NULL" " and you'll tell me if you dislike it (it will not be the last iteration since I haven't properly addressed the CSA). Karl ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [RFC V2 1/2] mac80211: Use a cfg80211_chan_def in ieee80211_hw_conf_chan 2013-03-22 13:50 ` Karl Beldan 2013-03-22 14:12 ` Karl Beldan @ 2013-03-22 14:21 ` Johannes Berg 1 sibling, 0 replies; 15+ messages in thread From: Johannes Berg @ 2013-03-22 14:21 UTC (permalink / raw) To: Karl Beldan; +Cc: linux-wireless, Karl Beldan On Fri, 2013-03-22 at 14:50 +0100, Karl Beldan wrote: > > > @@ -994,21 +996,25 @@ static void ieee80211_chswitch_work(struct work_struct *work) > > > if (!ifmgd->associated) > > > goto out; > > > > > > - sdata->local->_oper_channel = sdata->local->csa_channel; > > > - if (!sdata->local->ops->channel_switch) { > > > + cfreq_off = local->csa_channel->center_freq - > > > + local->_oper_chandef.chan->center_freq; > > > + > > > + local->_oper_chandef.center_freq1 += cfreq_off; > > > + local->_oper_chandef.center_freq2 += cfreq_off; > > > > Adjusting the center_freq1 is quite clearly wrong. :-) > > > > Besides, it might not even be supported by the driver. > > > Yes, the next serie will downgrade to NL80211_CHAN_WIDTH_20_NOHT. > I know this is not acceptable, I will get back to this very soon. That actually seems like a decent compromise, I'd accept that. It'll likely not cause much more breakage than the current code would ... :) Until we address this properly, of course, which I'll eventually need to do as well. > > There should be ready macros for chandef tracing -- can you use them? > > > > > + LOCAL_PR_FMT " ch:%#x" CHANDEF_PR_FMT, > > > + LOCAL_PR_ARG, __entry->changed, CHANDEF_PR_ARG > > > > Hm so you used some? Why not all? > > > I would have liked to use CHANDEF_ENTRY and CHANDEF_ASSIGN but they > don't check for "chandef.chan != NULL" which would Oops when using > chanctxes (and I hesitated to make it too invasive although I would > gladly add the check if that doesn't bother you. Doesn't bother me at all, go ahead and make that change. johannes ^ permalink raw reply [flat|nested] 15+ messages in thread
* [RFC V2 2/2] mac80211: Let drivers not supporting channel contexts use VHT 2013-03-19 0:23 [RFC V2 0/2] Enable VHT for non chanctxes drivers Karl Beldan 2013-03-19 0:23 ` [RFC V2 1/2] mac80211: Use a cfg80211_chan_def in ieee80211_hw_conf_chan Karl Beldan @ 2013-03-19 0:23 ` Karl Beldan 1 sibling, 0 replies; 15+ messages in thread From: Karl Beldan @ 2013-03-19 0:23 UTC (permalink / raw) To: Johannes Berg, Karl Beldan; +Cc: linux-wireless, Karl Beldan From: Karl Beldan <karl.beldan@rivierawaves.com> It is possible since the global hw config and local switched to cfg80211_chan_def. Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> --- net/mac80211/main.c | 14 +------------- 1 files changed, 1 insertions(+), 13 deletions(-) diff --git a/net/mac80211/main.c b/net/mac80211/main.c index 1da8ce0..e97f85a 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -838,22 +838,10 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) if (supp_ht) local->scan_ies_len += 2 + sizeof(struct ieee80211_ht_cap); - if (supp_vht) { + if (supp_vht) local->scan_ies_len += 2 + sizeof(struct ieee80211_vht_cap); - /* - * (for now at least), drivers wanting to use VHT must - * support channel contexts, as they contain all the - * necessary VHT information and the global hw config - * doesn't (yet) - */ - if (WARN_ON(!local->use_chanctx)) { - result = -EINVAL; - goto fail_wiphy_register; - } - } - if (!local->ops->hw_scan) { /* For hw_scan, driver needs to set these up. */ local->hw.wiphy->max_scan_ssids = 4; -- 1.7.9.dirty ^ permalink raw reply related [flat|nested] 15+ messages in thread
end of thread, other threads:[~2013-03-22 14:24 UTC | newest] Thread overview: 15+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2013-03-19 0:23 [RFC V2 0/2] Enable VHT for non chanctxes drivers Karl Beldan 2013-03-19 0:23 ` [RFC V2 1/2] mac80211: Use a cfg80211_chan_def in ieee80211_hw_conf_chan Karl Beldan 2013-03-19 11:47 ` Mahesh Palivela 2013-03-19 12:28 ` Karl Beldan 2013-03-19 18:27 ` Johannes Berg 2013-03-20 3:46 ` Mahesh Palivela 2013-03-20 10:53 ` Mahesh Palivela 2013-03-20 12:29 ` Karl Beldan 2013-03-21 11:19 ` Mahesh Palivela 2013-03-22 10:49 ` Karl Beldan 2013-03-22 10:55 ` Johannes Berg 2013-03-22 13:50 ` Karl Beldan 2013-03-22 14:12 ` Karl Beldan 2013-03-22 14:21 ` Johannes Berg 2013-03-19 0:23 ` [RFC V2 2/2] mac80211: Let drivers not supporting channel contexts use VHT Karl Beldan
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.