[PATCH 2/2] clk: tegra: Make gr2d and gr3d clocks children of pll_c

[Thierry Reding <thierry.reding-RM9K5IK7kjKj5M59NBduVrNAH6kLmebB@public.gmane.org>]

By default these clocks are children of pll_m, but in downstream kernels
they are reparented to pll_c. While at it, decrease their frequencies to
300 MHz because the defaults aren't in the specified range.

gr2d can reportedly run at much higher frequencies, but 300 MHz works
and is a more conservative default.

Signed-off-by: Thierry Reding <thierry.reding-RM9K5IK7kjKj5M59NBduVrNAH6kLmebB@public.gmane.org>
---
 drivers/clk/tegra/clk-tegra20.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/clk/tegra/clk-tegra20.c b/drivers/clk/tegra/clk-tegra20.c
index bf19400..b020beb 100644
--- a/drivers/clk/tegra/clk-tegra20.c
+++ b/drivers/clk/tegra/clk-tegra20.c
@@ -1247,6 +1247,8 @@ static __initdata struct tegra_clk_init_table init_table[] = {
 	{host1x, pll_c, 150000000, 0},
 	{disp1, pll_p, 600000000, 0},
 	{disp2, pll_p, 600000000, 0},
+	{gr2d, pll_c, 300000000, 0},
+	{gr3d, pll_c, 300000000, 0},
 	{clk_max, clk_max, 0, 0}, /* This MUST be the last entry */
 };
 
-- 
1.8.1.5