From: Dominik Dingel <dingel@linux.vnet.ibm.com> To: Gleb Natapov <gleb@redhat.com>, Paolo Bonzini <pbonzini@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com>, Heiko Carstens <heiko.carstens@de.ibm.com>, Martin Schwidefsky <schwidefsky@de.ibm.com>, Cornelia Huck <cornelia.huck@de.ibm.com>, Xiantao Zhang <xiantao.zhang@intel.com>, Alexander Graf <agraf@suse.de>, Christoffer Dall <christoffer.dall@linaro.org>, Marc Zyngier <marc.zyngier@arm.com>, Ralf Baechle <ralf@linux-mips.org>, kvm@vger.kernel.org, linux-s390@vger.kernel.org, linux-mm@kvack.org, linux-kernel@vger.kernel.org, Dominik Dingel <dingel@linux.vnet.ibm.com> Subject: [PATCH v4 0/4] Enable async page faults on s390 Date: Wed, 10 Jul 2013 14:59:51 +0200 [thread overview] Message-ID: <1373461195-27628-1-git-send-email-dingel@linux.vnet.ibm.com> (raw) Gleb, Paolo, based on the work from Martin and Carsten, this implementation enables async page faults. To the guest it will provide the pfault interface, but internally it uses the async page fault common code. The inital submission and it's discussion can be followed on http://www.mail-archive.com/kvm@vger.kernel.org/msg63359.html . There is a slight modification for common code to move from a pull to a push based approch on s390. As s390 we don't want to wait till we leave the guest state to queue the notification interrupts. To use this feature the controlling userspace hase to enable the capability. With that knob we can later on disable this feature for live migration. v3 -> v4 - Change "done" interrupts from local to floating - Add a comment for clarification - Change KVM_HAVE_ERR_BAD to move s390 implementation to s390 backend v2 -> v3 - Reworked the architecture specific parts, to only provide on addtional implementation - Renamed function to kvm_async_page_present_(sync|async) - Fixing KVM_HVA_ERR_BAD handling v1 -> v2: - Adding other architecture backends - Adding documentation for the ioctl - Improving the overall error handling - Reducing the needed modifications on the common code Dominik Dingel (4): PF: Add FAULT_FLAG_RETRY_NOWAIT for guest fault PF: Make KVM_HVA_ERR_BAD usable on s390 PF: Provide additional direct page notification PF: Async page fault support on s390 Documentation/s390/kvm.txt | 24 ++++++++ arch/s390/include/asm/kvm_host.h | 30 ++++++++++ arch/s390/include/asm/pgtable.h | 2 + arch/s390/include/asm/processor.h | 1 + arch/s390/include/uapi/asm/kvm.h | 10 ++++ arch/s390/kvm/Kconfig | 2 + arch/s390/kvm/Makefile | 2 +- arch/s390/kvm/diag.c | 63 ++++++++++++++++++++ arch/s390/kvm/interrupt.c | 43 +++++++++++--- arch/s390/kvm/kvm-s390.c | 118 ++++++++++++++++++++++++++++++++++++++ arch/s390/kvm/kvm-s390.h | 4 ++ arch/s390/kvm/sigp.c | 6 ++ arch/s390/mm/fault.c | 26 +++++++-- arch/x86/kvm/mmu.c | 2 +- include/linux/kvm_host.h | 10 +++- include/uapi/linux/kvm.h | 2 + virt/kvm/Kconfig | 4 ++ virt/kvm/async_pf.c | 22 ++++++- 18 files changed, 354 insertions(+), 17 deletions(-) -- 1.8.2.2
WARNING: multiple messages have this Message-ID (diff)
From: Dominik Dingel <dingel@linux.vnet.ibm.com> To: Gleb Natapov <gleb@redhat.com>, Paolo Bonzini <pbonzini@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com>, Heiko Carstens <heiko.carstens@de.ibm.com>, Martin Schwidefsky <schwidefsky@de.ibm.com>, Cornelia Huck <cornelia.huck@de.ibm.com>, Xiantao Zhang <xiantao.zhang@intel.com>, Alexander Graf <agraf@suse.de>, Christoffer Dall <christoffer.dall@linaro.org>, Marc Zyngier <marc.zyngier@arm.com>, Ralf Baechle <ralf@linux-mips.org>, kvm@vger.kernel.org, linux-s390@vger.kernel.org, linux-mm@kvack.org, linux-kernel@vger.kernel.org, Dominik Dingel <dingel@linux.vnet.ibm.com> Subject: [PATCH v4 0/4] Enable async page faults on s390 Date: Wed, 10 Jul 2013 14:59:51 +0200 [thread overview] Message-ID: <1373461195-27628-1-git-send-email-dingel@linux.vnet.ibm.com> (raw) Gleb, Paolo, based on the work from Martin and Carsten, this implementation enables async page faults. To the guest it will provide the pfault interface, but internally it uses the async page fault common code. The inital submission and it's discussion can be followed on http://www.mail-archive.com/kvm@vger.kernel.org/msg63359.html . There is a slight modification for common code to move from a pull to a push based approch on s390. As s390 we don't want to wait till we leave the guest state to queue the notification interrupts. To use this feature the controlling userspace hase to enable the capability. With that knob we can later on disable this feature for live migration. v3 -> v4 - Change "done" interrupts from local to floating - Add a comment for clarification - Change KVM_HAVE_ERR_BAD to move s390 implementation to s390 backend v2 -> v3 - Reworked the architecture specific parts, to only provide on addtional implementation - Renamed function to kvm_async_page_present_(sync|async) - Fixing KVM_HVA_ERR_BAD handling v1 -> v2: - Adding other architecture backends - Adding documentation for the ioctl - Improving the overall error handling - Reducing the needed modifications on the common code Dominik Dingel (4): PF: Add FAULT_FLAG_RETRY_NOWAIT for guest fault PF: Make KVM_HVA_ERR_BAD usable on s390 PF: Provide additional direct page notification PF: Async page fault support on s390 Documentation/s390/kvm.txt | 24 ++++++++ arch/s390/include/asm/kvm_host.h | 30 ++++++++++ arch/s390/include/asm/pgtable.h | 2 + arch/s390/include/asm/processor.h | 1 + arch/s390/include/uapi/asm/kvm.h | 10 ++++ arch/s390/kvm/Kconfig | 2 + arch/s390/kvm/Makefile | 2 +- arch/s390/kvm/diag.c | 63 ++++++++++++++++++++ arch/s390/kvm/interrupt.c | 43 +++++++++++--- arch/s390/kvm/kvm-s390.c | 118 ++++++++++++++++++++++++++++++++++++++ arch/s390/kvm/kvm-s390.h | 4 ++ arch/s390/kvm/sigp.c | 6 ++ arch/s390/mm/fault.c | 26 +++++++-- arch/x86/kvm/mmu.c | 2 +- include/linux/kvm_host.h | 10 +++- include/uapi/linux/kvm.h | 2 + virt/kvm/Kconfig | 4 ++ virt/kvm/async_pf.c | 22 ++++++- 18 files changed, 354 insertions(+), 17 deletions(-) -- 1.8.2.2 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to majordomo@kvack.org. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next reply other threads:[~2013-07-10 13:01 UTC|newest] Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top 2013-07-10 12:59 Dominik Dingel [this message] 2013-07-10 12:59 ` [PATCH v4 0/4] Enable async page faults on s390 Dominik Dingel 2013-07-10 12:59 ` [PATCH 1/4] PF: Add FAULT_FLAG_RETRY_NOWAIT for guest fault Dominik Dingel 2013-07-10 12:59 ` Dominik Dingel 2013-07-10 12:59 ` [PATCH 2/4] PF: Make KVM_HVA_ERR_BAD usable on s390 Dominik Dingel 2013-07-10 12:59 ` Dominik Dingel 2013-07-10 12:59 ` [PATCH 3/4] PF: Provide additional direct page notification Dominik Dingel 2013-07-10 12:59 ` Dominik Dingel 2013-07-10 12:59 ` [PATCH 4/4] PF: Async page fault support on s390 Dominik Dingel 2013-07-10 12:59 ` Dominik Dingel 2013-07-11 9:04 ` Gleb Natapov 2013-07-11 9:04 ` Gleb Natapov 2013-07-11 10:41 ` Christian Borntraeger 2013-07-11 10:41 ` Christian Borntraeger 2013-07-11 10:58 ` Gleb Natapov 2013-07-11 10:58 ` Gleb Natapov 2013-07-18 13:57 ` Paolo Bonzini 2013-07-18 13:57 ` Paolo Bonzini 2013-07-18 14:12 ` Christian Borntraeger 2013-07-18 14:12 ` Christian Borntraeger
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1373461195-27628-1-git-send-email-dingel@linux.vnet.ibm.com \ --to=dingel@linux.vnet.ibm.com \ --cc=agraf@suse.de \ --cc=borntraeger@de.ibm.com \ --cc=christoffer.dall@linaro.org \ --cc=cornelia.huck@de.ibm.com \ --cc=gleb@redhat.com \ --cc=heiko.carstens@de.ibm.com \ --cc=kvm@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-mm@kvack.org \ --cc=linux-s390@vger.kernel.org \ --cc=marc.zyngier@arm.com \ --cc=pbonzini@redhat.com \ --cc=ralf@linux-mips.org \ --cc=schwidefsky@de.ibm.com \ --cc=xiantao.zhang@intel.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.