All of lore.kernel.org
 help / color / mirror / Atom feed
From: peter.chen@freescale.com (Peter Chen)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v12 09/13] usb: chipidea: add vbus interrupt handler
Date: Thu, 11 Jul 2013 14:27:17 +0800	[thread overview]
Message-ID: <1373524041-10482-10-git-send-email-peter.chen@freescale.com> (raw)
In-Reply-To: <1373524041-10482-1-git-send-email-peter.chen@freescale.com>

We add vbus interrupt handler at ci_otg_work, it uses OTGSC_BSV(at otgsc)
to know it is connect or disconnet event.
Meanwhile, we introduce two flags id_event and b_sess_valid_event to
indicate it is an id interrupt or a vbus interrupt.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
---
 drivers/usb/chipidea/ci.h   |    5 +++++
 drivers/usb/chipidea/core.c |   28 +++++++++++++++++++++++-----
 drivers/usb/chipidea/otg.c  |   42 +++++++++++++++++++++++++++++++++++-------
 drivers/usb/chipidea/otg.h  |    1 +
 drivers/usb/chipidea/udc.c  |    7 +++++++
 5 files changed, 71 insertions(+), 12 deletions(-)

diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h
index 33cb29f..3160363 100644
--- a/drivers/usb/chipidea/ci.h
+++ b/drivers/usb/chipidea/ci.h
@@ -132,6 +132,9 @@ struct hw_bank {
  * @transceiver: pointer to USB PHY, if any
  * @hcd: pointer to usb_hcd for ehci host driver
  * @debugfs: root dentry for this controller in debugfs
+ * @id_event: indicates there is an id event, and handled at ci_otg_work
+ * @b_sess_valid_event: indicates there is a vbus event, and handled
+ * at ci_otg_work
  */
 struct ci_hdrc {
 	struct device			*dev;
@@ -168,6 +171,8 @@ struct ci_hdrc {
 	struct usb_phy			*transceiver;
 	struct usb_hcd			*hcd;
 	struct dentry			*debugfs;
+	bool				id_event;
+	bool				b_sess_valid_event;
 };
 
 static inline struct ci_role_driver *ci_role(struct ci_hdrc *ci)
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index 0197da2..7a07300 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -304,16 +304,34 @@ static irqreturn_t ci_irq(int irq, void *data)
 	if (ci->is_otg)
 		otgsc = hw_read(ci, OP_OTGSC, ~0);
 
-	if (ci->role != CI_ROLE_END)
-		ret = ci_role(ci)->irq(ci);
+	/*
+	 * Handle id change interrupt, it indicates device/host function
+	 * switch.
+	 */
+	if (ci->is_otg && (otgsc & OTGSC_IDIE) && (otgsc & OTGSC_IDIS)) {
+		ci->id_event = true;
+		ci_clear_otg_interrupt(ci, OTGSC_IDIS);
+		disable_irq_nosync(ci->irq);
+		queue_work(ci->wq, &ci->work);
+		return IRQ_HANDLED;
+	}
 
-	if (ci->is_otg && (otgsc & OTGSC_IDIS)) {
-		hw_write(ci, OP_OTGSC, OTGSC_IDIS, OTGSC_IDIS);
+	/*
+	 * Handle vbus change interrupt, it indicates device connection
+	 * and disconnection events.
+	 */
+	if (ci->is_otg && (otgsc & OTGSC_BSVIE) && (otgsc & OTGSC_BSVIS)) {
+		ci->b_sess_valid_event = true;
+		ci_clear_otg_interrupt(ci, OTGSC_BSVIS);
 		disable_irq_nosync(ci->irq);
 		queue_work(ci->wq, &ci->work);
-		ret = IRQ_HANDLED;
+		return IRQ_HANDLED;
 	}
 
+	/* Handle device/host interrupt */
+	if (ci->role != CI_ROLE_END)
+		ret = ci_role(ci)->irq(ci);
+
 	return ret;
 }
 
diff --git a/drivers/usb/chipidea/otg.c b/drivers/usb/chipidea/otg.c
index 68f2faf..c74194d 100644
--- a/drivers/usb/chipidea/otg.c
+++ b/drivers/usb/chipidea/otg.c
@@ -52,13 +52,23 @@ enum ci_role ci_otg_role(struct ci_hdrc *ci)
 	return role;
 }
 
-/**
- * ci_role_work - perform role changing based on ID pin
- * @work: work struct
- */
-static void ci_role_work(struct work_struct *work)
+void ci_handle_vbus_change(struct ci_hdrc *ci)
+{
+	u32 otgsc;
+
+	if (!ci->is_otg)
+		return;
+
+	otgsc = hw_read(ci, OP_OTGSC, ~0);
+
+	if (otgsc & OTGSC_BSV)
+		usb_gadget_vbus_connect(&ci->gadget);
+	else
+		usb_gadget_vbus_disconnect(&ci->gadget);
+}
+
+static void ci_handle_id_switch(struct ci_hdrc *ci)
 {
-	struct ci_hdrc *ci = container_of(work, struct ci_hdrc, work);
 	enum ci_role role = ci_otg_role(ci);
 
 	if (role != ci->role) {
@@ -68,17 +78,35 @@ static void ci_role_work(struct work_struct *work)
 		ci_role_stop(ci);
 		ci_role_start(ci, role);
 	}
+}
+/**
+ * ci_otg_work - perform otg (vbus/id) event handle
+ * @work: work struct
+ */
+static void ci_otg_work(struct work_struct *work)
+{
+	struct ci_hdrc *ci = container_of(work, struct ci_hdrc, work);
+
+	if (ci->id_event) {
+		ci->id_event = false;
+		ci_handle_id_switch(ci);
+	} else if (ci->b_sess_valid_event) {
+		ci->b_sess_valid_event = false;
+		ci_handle_vbus_change(ci);
+	} else
+		dev_err(ci->dev, "unexpected event occurs at %s\n", __func__);
 
 	enable_irq(ci->irq);
 }
 
+
 /**
  * ci_hdrc_otg_init - initialize otg struct
  * ci: the controller
  */
 int ci_hdrc_otg_init(struct ci_hdrc *ci)
 {
-	INIT_WORK(&ci->work, ci_role_work);
+	INIT_WORK(&ci->work, ci_otg_work);
 	ci->wq = create_singlethread_workqueue("ci_otg");
 	if (!ci->wq) {
 		dev_err(ci->dev, "can't create workqueue\n");
diff --git a/drivers/usb/chipidea/otg.h b/drivers/usb/chipidea/otg.h
index 8913062..b8d5c05 100644
--- a/drivers/usb/chipidea/otg.h
+++ b/drivers/usb/chipidea/otg.h
@@ -17,5 +17,6 @@ void ci_enable_otg_interrupt(struct ci_hdrc *ci, u32 bits);
 void ci_disable_otg_interrupt(struct ci_hdrc *ci, u32 bits);
 void ci_hdrc_otg_destory(struct ci_hdrc *ci);
 enum ci_role ci_otg_role(struct ci_hdrc *ci);
+void ci_handle_vbus_change(struct ci_hdrc *ci);
 
 #endif /* __DRIVERS_USB_CHIPIDEA_OTG_H */
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index 24a100d..c70ce38 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -85,8 +85,10 @@ static int hw_device_state(struct ci_hdrc *ci, u32 dma)
 		/* interrupt, error, port change, reset, sleep/suspend */
 		hw_write(ci, OP_USBINTR, ~0,
 			     USBi_UI|USBi_UEI|USBi_PCI|USBi_URI|USBi_SLI);
+		hw_write(ci, OP_USBCMD, USBCMD_RS, USBCMD_RS);
 	} else {
 		hw_write(ci, OP_USBINTR, ~0, 0);
+		hw_write(ci, OP_USBCMD, USBCMD_RS, 0);
 	}
 	return 0;
 }
@@ -1460,6 +1462,7 @@ static int ci_udc_vbus_session(struct usb_gadget *_gadget, int is_active)
 			pm_runtime_get_sync(&_gadget->dev);
 			hw_device_reset(ci, USBMODE_CM_DC);
 			hw_device_state(ci, ci->ep0out->qh.dma);
+			dev_dbg(ci->dev, "Connected to host\n");
 		} else {
 			hw_device_state(ci, 0);
 			if (ci->platdata->notify_event)
@@ -1467,6 +1470,7 @@ static int ci_udc_vbus_session(struct usb_gadget *_gadget, int is_active)
 				CI_HDRC_CONTROLLER_STOPPED_EVENT);
 			_gadget_stop_activity(&ci->gadget);
 			pm_runtime_put_sync(&_gadget->dev);
+			dev_dbg(ci->dev, "Disconnected from host\n");
 		}
 	}
 
@@ -1822,6 +1826,9 @@ static int udc_start(struct ci_hdrc *ci)
 	pm_runtime_no_callbacks(&ci->gadget.dev);
 	pm_runtime_enable(&ci->gadget.dev);
 
+	/* Update ci->vbus_active */
+	ci_handle_vbus_change(ci);
+
 	return retval;
 
 remove_trans:
-- 
1.7.0.4

  parent reply	other threads:[~2013-07-11  6:27 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-07-11  6:27 [PATCH v12 00/13] Add tested id switch and vbus connect detect support for Chipidea Peter Chen
2013-07-11  6:27 ` [PATCH v12 01/13] usb: chipidea: add vbus regulator control Peter Chen
2013-07-11  6:27 ` [PATCH v12 02/13] usb: chipidea: imx: remove vbus regulator operation Peter Chen
2013-07-11  6:37   ` Sascha Hauer
2013-07-11  6:55     ` Peter Chen
2013-07-11  6:27 ` [PATCH v12 03/13] usb: chipidea: udc: otg_set_peripheral is useless for some chipidea users Peter Chen
2013-07-11  6:27 ` [PATCH v12 04/13] usb: chipidea: otg: Add otg file used to access otgsc Peter Chen
2013-07-11  6:27 ` [PATCH v12 05/13] usb: chipidea: Add role init and destory APIs Peter Chen
2013-07-11  6:27 ` [PATCH v12 06/13] usb: chipidea: add otg_cap attribute for otg capable Peter Chen
2013-07-11 15:36   ` Marek Vasut
2013-07-12  2:58     ` Peter Chen
2013-07-12  3:54       ` Marek Vasut
2013-07-12  8:12   ` Alexander Shishkin
2013-07-12  8:25     ` Peter Chen
2013-07-12  9:42       ` Alexander Shishkin
2013-07-12 10:16         ` Peter Chen
2013-07-16  9:45         ` Peter Chen
2013-07-11  6:27 ` [PATCH v12 07/13] usb: chipidea: disable all interrupts and clear all interrupts status Peter Chen
2013-07-11  6:27 ` [PATCH v12 08/13] usb: chipidea: move otg relate things to otg file Peter Chen
2013-07-11  6:27 ` Peter Chen [this message]
2013-07-11  6:27 ` [PATCH v12 10/13] usb: chipidea: add wait vbus lower than OTGSC_BSV before role starts Peter Chen
2013-07-11  7:24   ` Marc Kleine-Budde
2013-07-11  9:25     ` Peter Chen
2013-07-11  9:31       ` Marc Kleine-Budde
2013-07-11  6:27 ` [PATCH v12 11/13] usb: chipidea: udc: misuse flag CI_HDRC_REGS_SHARED and CI_HDRC_PULLUP_ON_VBUS Peter Chen
2013-07-11  6:27 ` [PATCH v12 12/13] usb: chipidea: udc: .pullup is valid when vbus is on at CI_HDRC_PULLUP_ON_VBUS Peter Chen
2013-07-11  6:27 ` [PATCH v12 13/13] usb: chipidea: udc: fix the oops when plugs in usb cable after rmmod gadget Peter Chen
2013-07-11 17:57 ` [PATCH v12 00/13] Add tested id switch and vbus connect detect support for Chipidea Marek Vasut
2013-07-12  3:12   ` Peter Chen
2013-07-12  4:04     ` Marek Vasut
2013-07-12  8:26       ` Peter Chen
2013-07-12 13:18         ` Marek Vasut
2013-07-13  0:36           ` Chen Peter-B29397
2013-07-16  9:43           ` Peter Chen
2013-07-22  1:15             ` Marek Vasut
2013-07-22  1:21               ` Peter Chen
2013-07-22  1:40                 ` Marek Vasut
2013-07-22  1:53                   ` Peter Chen
2013-07-25  5:55                     ` Marek Vasut
2013-07-25  5:58                       ` Peter Chen
2013-07-25 12:36                         ` Marek Vasut
2013-07-19 14:11 ` Fabio Estevam
2013-07-25  6:05 ` Marek Vasut

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1373524041-10482-10-git-send-email-peter.chen@freescale.com \
    --to=peter.chen@freescale.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.