[PATCH 0/4] remove devm_pinctrl_get_select_default from drivers

[PATCH 0/4] remove devm_pinctrl_get_select_default from drivers

[Wolfram Sang]

The core does this automatically, no need to do this explicitly in drivers.
Those patchces should go via the respective subtrees. Thanks!


Wolfram Sang (4):
  drivers/gpu/drm/tilcdc: don't use devm_pinctrl_get_select_default() in
    probe
  drivers/mmc/host: don't use devm_pinctrl_get_select_default() in probe
  drivers/pwm: don't use devm_pinctrl_get_select_default() in probe
  sound/soc/atmel: don't use devm_pinctrl_get_select_default() in probe

 drivers/gpu/drm/tilcdc/tilcdc_panel.c  | 6 ------
 drivers/gpu/drm/tilcdc/tilcdc_slave.c  | 6 ------
 drivers/gpu/drm/tilcdc/tilcdc_tfp410.c | 6 ------
 drivers/mmc/host/mvsdio.c              | 7 +------
 drivers/mmc/host/omap_hsmmc.c          | 7 -------
 drivers/mmc/host/sdhci-esdhc-imx.c     | 8 --------
 drivers/pwm/pwm-tiecap.c               | 6 ------
 drivers/pwm/pwm-tiehrpwm.c             | 6 ------
 sound/soc/atmel/atmel_wm8904.c         | 8 --------
 9 files changed, 1 insertion(+), 59 deletions(-)

-- 
1.8.4.rc3

[PATCH 0/4] remove devm_pinctrl_get_select_default from drivers

[Wolfram Sang]

The core does this automatically, no need to do this explicitly in drivers.
Those patchces should go via the respective subtrees. Thanks!


Wolfram Sang (4):
  drivers/gpu/drm/tilcdc: don't use devm_pinctrl_get_select_default() in
    probe
  drivers/mmc/host: don't use devm_pinctrl_get_select_default() in probe
  drivers/pwm: don't use devm_pinctrl_get_select_default() in probe
  sound/soc/atmel: don't use devm_pinctrl_get_select_default() in probe

 drivers/gpu/drm/tilcdc/tilcdc_panel.c  | 6 ------
 drivers/gpu/drm/tilcdc/tilcdc_slave.c  | 6 ------
 drivers/gpu/drm/tilcdc/tilcdc_tfp410.c | 6 ------
 drivers/mmc/host/mvsdio.c              | 7 +------
 drivers/mmc/host/omap_hsmmc.c          | 7 -------
 drivers/mmc/host/sdhci-esdhc-imx.c     | 8 --------
 drivers/pwm/pwm-tiecap.c               | 6 ------
 drivers/pwm/pwm-tiehrpwm.c             | 6 ------
 sound/soc/atmel/atmel_wm8904.c         | 8 --------
 9 files changed, 1 insertion(+), 59 deletions(-)

-- 
1.8.4.rc3

[PATCH 1/4] drivers/gpu/drm/tilcdc: don't use devm_pinctrl_get_select_default() in probe

[Wolfram Sang]

Since commit ab78029 (drivers/pinctrl: grab default handles from device core),
we can rely on device core for setting the default pins. Compile tested only.

Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13)
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
---
 drivers/gpu/drm/tilcdc/tilcdc_panel.c  | 6 ------
 drivers/gpu/drm/tilcdc/tilcdc_slave.c  | 6 ------
 drivers/gpu/drm/tilcdc/tilcdc_tfp410.c | 6 ------
 3 files changed, 18 deletions(-)

diff --git a/drivers/gpu/drm/tilcdc/tilcdc_panel.c b/drivers/gpu/drm/tilcdc/tilcdc_panel.c
index 86c6732..f0ff5f8 100644
--- a/drivers/gpu/drm/tilcdc/tilcdc_panel.c
+++ b/drivers/gpu/drm/tilcdc/tilcdc_panel.c
@@ -16,7 +16,6 @@
  */
 
 #include <linux/pinctrl/pinmux.h>
-#include <linux/pinctrl/consumer.h>
 #include <linux/backlight.h>
 #include <video/display_timing.h>
 #include <video/of_display_timing.h>
@@ -358,7 +357,6 @@ static int panel_probe(struct platform_device *pdev)
 	struct device_node *node = pdev->dev.of_node;
 	struct panel_module *panel_mod;
 	struct tilcdc_module *mod;
-	struct pinctrl *pinctrl;
 	int ret = -EINVAL;
 
 
@@ -376,10 +374,6 @@ static int panel_probe(struct platform_device *pdev)
 
 	tilcdc_module_init(mod, "panel", &panel_module_ops);
 
-	pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
-	if (IS_ERR(pinctrl))
-		dev_warn(&pdev->dev, "pins are not configured\n");
-
 
 	panel_mod->timings = of_get_display_timings(node);
 	if (!panel_mod->timings) {
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_slave.c b/drivers/gpu/drm/tilcdc/tilcdc_slave.c
index 595068b..4f3c969 100644
--- a/drivers/gpu/drm/tilcdc/tilcdc_slave.c
+++ b/drivers/gpu/drm/tilcdc/tilcdc_slave.c
@@ -17,7 +17,6 @@
 
 #include <linux/i2c.h>
 #include <linux/pinctrl/pinmux.h>
-#include <linux/pinctrl/consumer.h>
 #include <drm/drm_encoder_slave.h>
 
 #include "tilcdc_drv.h"
@@ -320,7 +319,6 @@ static int slave_probe(struct platform_device *pdev)
 	struct device_node *i2c_node;
 	struct slave_module *slave_mod;
 	struct tilcdc_module *mod;
-	struct pinctrl *pinctrl;
 	uint32_t i2c_phandle;
 	struct i2c_adapter *slavei2c;
 	int ret = -EINVAL;
@@ -366,10 +364,6 @@ static int slave_probe(struct platform_device *pdev)
 
 	tilcdc_module_init(mod, "slave", &slave_module_ops);
 
-	pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
-	if (IS_ERR(pinctrl))
-		dev_warn(&pdev->dev, "pins are not configured\n");
-
 	tilcdc_slave_probedefer(false);
 
 	return 0;
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_tfp410.c b/drivers/gpu/drm/tilcdc/tilcdc_tfp410.c
index c38b56b..20f3d89 100644
--- a/drivers/gpu/drm/tilcdc/tilcdc_tfp410.c
+++ b/drivers/gpu/drm/tilcdc/tilcdc_tfp410.c
@@ -19,7 +19,6 @@
 #include <linux/gpio.h>
 #include <linux/of_gpio.h>
 #include <linux/pinctrl/pinmux.h>
-#include <linux/pinctrl/consumer.h>
 
 #include "tilcdc_drv.h"
 
@@ -326,7 +325,6 @@ static int tfp410_probe(struct platform_device *pdev)
 	struct device_node *i2c_node;
 	struct tfp410_module *tfp410_mod;
 	struct tilcdc_module *mod;
-	struct pinctrl *pinctrl;
 	uint32_t i2c_phandle;
 	int ret = -EINVAL;
 
@@ -344,10 +342,6 @@ static int tfp410_probe(struct platform_device *pdev)
 
 	tilcdc_module_init(mod, "tfp410", &tfp410_module_ops);
 
-	pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
-	if (IS_ERR(pinctrl))
-		dev_warn(&pdev->dev, "pins are not configured\n");
-
 	if (of_property_read_u32(node, "i2c", &i2c_phandle)) {
 		dev_err(&pdev->dev, "could not get i2c bus phandle\n");
 		goto fail;
-- 
1.8.4.rc3

[PATCH 1/4] drivers/gpu/drm/tilcdc: don't use devm_pinctrl_get_select_default() in probe

[Wolfram Sang]

Since commit ab78029 (drivers/pinctrl: grab default handles from device core),
we can rely on device core for setting the default pins. Compile tested only.

Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13)
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
---
 drivers/gpu/drm/tilcdc/tilcdc_panel.c  | 6 ------
 drivers/gpu/drm/tilcdc/tilcdc_slave.c  | 6 ------
 drivers/gpu/drm/tilcdc/tilcdc_tfp410.c | 6 ------
 3 files changed, 18 deletions(-)

diff --git a/drivers/gpu/drm/tilcdc/tilcdc_panel.c b/drivers/gpu/drm/tilcdc/tilcdc_panel.c
index 86c6732..f0ff5f8 100644
--- a/drivers/gpu/drm/tilcdc/tilcdc_panel.c
+++ b/drivers/gpu/drm/tilcdc/tilcdc_panel.c
@@ -16,7 +16,6 @@
  */
 
 #include <linux/pinctrl/pinmux.h>
-#include <linux/pinctrl/consumer.h>
 #include <linux/backlight.h>
 #include <video/display_timing.h>
 #include <video/of_display_timing.h>
@@ -358,7 +357,6 @@ static int panel_probe(struct platform_device *pdev)
 	struct device_node *node = pdev->dev.of_node;
 	struct panel_module *panel_mod;
 	struct tilcdc_module *mod;
-	struct pinctrl *pinctrl;
 	int ret = -EINVAL;
 
 
@@ -376,10 +374,6 @@ static int panel_probe(struct platform_device *pdev)
 
 	tilcdc_module_init(mod, "panel", &panel_module_ops);
 
-	pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
-	if (IS_ERR(pinctrl))
-		dev_warn(&pdev->dev, "pins are not configured\n");
-
 
 	panel_mod->timings = of_get_display_timings(node);
 	if (!panel_mod->timings) {
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_slave.c b/drivers/gpu/drm/tilcdc/tilcdc_slave.c
index 595068b..4f3c969 100644
--- a/drivers/gpu/drm/tilcdc/tilcdc_slave.c
+++ b/drivers/gpu/drm/tilcdc/tilcdc_slave.c
@@ -17,7 +17,6 @@
 
 #include <linux/i2c.h>
 #include <linux/pinctrl/pinmux.h>
-#include <linux/pinctrl/consumer.h>
 #include <drm/drm_encoder_slave.h>
 
 #include "tilcdc_drv.h"
@@ -320,7 +319,6 @@ static int slave_probe(struct platform_device *pdev)
 	struct device_node *i2c_node;
 	struct slave_module *slave_mod;
 	struct tilcdc_module *mod;
-	struct pinctrl *pinctrl;
 	uint32_t i2c_phandle;
 	struct i2c_adapter *slavei2c;
 	int ret = -EINVAL;
@@ -366,10 +364,6 @@ static int slave_probe(struct platform_device *pdev)
 
 	tilcdc_module_init(mod, "slave", &slave_module_ops);
 
-	pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
-	if (IS_ERR(pinctrl))
-		dev_warn(&pdev->dev, "pins are not configured\n");
-
 	tilcdc_slave_probedefer(false);
 
 	return 0;
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_tfp410.c b/drivers/gpu/drm/tilcdc/tilcdc_tfp410.c
index c38b56b..20f3d89 100644
--- a/drivers/gpu/drm/tilcdc/tilcdc_tfp410.c
+++ b/drivers/gpu/drm/tilcdc/tilcdc_tfp410.c
@@ -19,7 +19,6 @@
 #include <linux/gpio.h>
 #include <linux/of_gpio.h>
 #include <linux/pinctrl/pinmux.h>
-#include <linux/pinctrl/consumer.h>
 
 #include "tilcdc_drv.h"
 
@@ -326,7 +325,6 @@ static int tfp410_probe(struct platform_device *pdev)
 	struct device_node *i2c_node;
 	struct tfp410_module *tfp410_mod;
 	struct tilcdc_module *mod;
-	struct pinctrl *pinctrl;
 	uint32_t i2c_phandle;
 	int ret = -EINVAL;
 
@@ -344,10 +342,6 @@ static int tfp410_probe(struct platform_device *pdev)
 
 	tilcdc_module_init(mod, "tfp410", &tfp410_module_ops);
 
-	pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
-	if (IS_ERR(pinctrl))
-		dev_warn(&pdev->dev, "pins are not configured\n");
-
 	if (of_property_read_u32(node, "i2c", &i2c_phandle)) {
 		dev_err(&pdev->dev, "could not get i2c bus phandle\n");
 		goto fail;
-- 
1.8.4.rc3

[PATCH 2/4] drivers/mmc/host: don't use devm_pinctrl_get_select_default() in probe

[Wolfram Sang]

Since commit ab78029 (drivers/pinctrl: grab default handles from device core),
we can rely on device core for setting the default pins. Compile tested only.

Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13)
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
---
 drivers/mmc/host/mvsdio.c          | 7 +------
 drivers/mmc/host/omap_hsmmc.c      | 7 -------
 drivers/mmc/host/sdhci-esdhc-imx.c | 8 --------
 3 files changed, 1 insertion(+), 21 deletions(-)

diff --git a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c
index 06c5b0b..8c9f448 100644
--- a/drivers/mmc/host/mvsdio.c
+++ b/drivers/mmc/host/mvsdio.c
@@ -25,7 +25,6 @@
 #include <linux/of_irq.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/slot-gpio.h>
-#include <linux/pinctrl/consumer.h>
 
 #include <asm/sizes.h>
 #include <asm/unaligned.h>
@@ -685,7 +684,7 @@ static int __init mvsd_probe(struct platform_device *pdev)
 	const struct mbus_dram_target_info *dram;
 	struct resource *r;
 	int ret, irq;
-	struct pinctrl *pinctrl;
+	int gpio_card_detect, gpio_write_protect;
 
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	irq = platform_get_irq(pdev, 0);
@@ -702,10 +701,6 @@ static int __init mvsd_probe(struct platform_device *pdev)
 	host->mmc = mmc;
 	host->dev = &pdev->dev;
 
-	pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
-	if (IS_ERR(pinctrl))
-		dev_warn(&pdev->dev, "no pins associated\n");
-
 	/*
 	 * Some non-DT platforms do not pass a clock, and the clock
 	 * frequency is passed through platform_data. On DT platforms,
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 6ac63df..f6606cf 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -38,7 +38,6 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 #include <linux/regulator/consumer.h>
-#include <linux/pinctrl/consumer.h>
 #include <linux/pm_runtime.h>
 #include <linux/platform_data/mmc-omap.h>
 
@@ -1777,7 +1776,6 @@ static int omap_hsmmc_probe(struct platform_device *pdev)
 	const struct of_device_id *match;
 	dma_cap_mask_t mask;
 	unsigned tx_req, rx_req;
-	struct pinctrl *pinctrl;
 
 	match = of_match_device(of_match_ptr(omap_mmc_of_match), &pdev->dev);
 	if (match) {
@@ -1996,11 +1994,6 @@ static int omap_hsmmc_probe(struct platform_device *pdev)
 
 	omap_hsmmc_disable_irq(host);
 
-	pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
-	if (IS_ERR(pinctrl))
-		dev_warn(&pdev->dev,
-			"pins are not configured from the driver\n");
-
 	omap_hsmmc_protect_card(host);
 
 	mmc_add_host(mmc);
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index abc8cf0..0ac8b1a 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -25,7 +25,6 @@
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/of_gpio.h>
-#include <linux/pinctrl/consumer.h>
 #include <linux/platform_data/mmc-esdhc-imx.h>
 #include "sdhci-pltfm.h"
 #include "sdhci-esdhc.h"
@@ -80,7 +79,6 @@ struct pltfm_imx_data {
 	int flags;
 	u32 scratchpad;
 	enum imx_esdhc_type devtype;
-	struct pinctrl *pinctrl;
 	struct esdhc_platform_data boarddata;
 	struct clk *clk_ipg;
 	struct clk *clk_ahb;
@@ -568,12 +566,6 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
 	clk_prepare_enable(imx_data->clk_ipg);
 	clk_prepare_enable(imx_data->clk_ahb);
 
-	imx_data->pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
-	if (IS_ERR(imx_data->pinctrl)) {
-		err = PTR_ERR(imx_data->pinctrl);
-		goto disable_clk;
-	}
-
 	host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
 
 	if (is_imx25_esdhc(imx_data) || is_imx35_esdhc(imx_data))
-- 
1.8.4.rc3

[PATCH 2/4] drivers/mmc/host: don't use devm_pinctrl_get_select_default() in probe

[Wolfram Sang]

Since commit ab78029 (drivers/pinctrl: grab default handles from device core),
we can rely on device core for setting the default pins. Compile tested only.

Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13)
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
---
 drivers/mmc/host/mvsdio.c          | 7 +------
 drivers/mmc/host/omap_hsmmc.c      | 7 -------
 drivers/mmc/host/sdhci-esdhc-imx.c | 8 --------
 3 files changed, 1 insertion(+), 21 deletions(-)

diff --git a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c
index 06c5b0b..8c9f448 100644
--- a/drivers/mmc/host/mvsdio.c
+++ b/drivers/mmc/host/mvsdio.c
@@ -25,7 +25,6 @@
 #include <linux/of_irq.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/slot-gpio.h>
-#include <linux/pinctrl/consumer.h>
 
 #include <asm/sizes.h>
 #include <asm/unaligned.h>
@@ -685,7 +684,7 @@ static int __init mvsd_probe(struct platform_device *pdev)
 	const struct mbus_dram_target_info *dram;
 	struct resource *r;
 	int ret, irq;
-	struct pinctrl *pinctrl;
+	int gpio_card_detect, gpio_write_protect;
 
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	irq = platform_get_irq(pdev, 0);
@@ -702,10 +701,6 @@ static int __init mvsd_probe(struct platform_device *pdev)
 	host->mmc = mmc;
 	host->dev = &pdev->dev;
 
-	pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
-	if (IS_ERR(pinctrl))
-		dev_warn(&pdev->dev, "no pins associated\n");
-
 	/*
 	 * Some non-DT platforms do not pass a clock, and the clock
 	 * frequency is passed through platform_data. On DT platforms,
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 6ac63df..f6606cf 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -38,7 +38,6 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 #include <linux/regulator/consumer.h>
-#include <linux/pinctrl/consumer.h>
 #include <linux/pm_runtime.h>
 #include <linux/platform_data/mmc-omap.h>
 
@@ -1777,7 +1776,6 @@ static int omap_hsmmc_probe(struct platform_device *pdev)
 	const struct of_device_id *match;
 	dma_cap_mask_t mask;
 	unsigned tx_req, rx_req;
-	struct pinctrl *pinctrl;
 
 	match = of_match_device(of_match_ptr(omap_mmc_of_match), &pdev->dev);
 	if (match) {
@@ -1996,11 +1994,6 @@ static int omap_hsmmc_probe(struct platform_device *pdev)
 
 	omap_hsmmc_disable_irq(host);
 
-	pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
-	if (IS_ERR(pinctrl))
-		dev_warn(&pdev->dev,
-			"pins are not configured from the driver\n");
-
 	omap_hsmmc_protect_card(host);
 
 	mmc_add_host(mmc);
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index abc8cf0..0ac8b1a 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -25,7 +25,6 @@
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/of_gpio.h>
-#include <linux/pinctrl/consumer.h>
 #include <linux/platform_data/mmc-esdhc-imx.h>
 #include "sdhci-pltfm.h"
 #include "sdhci-esdhc.h"
@@ -80,7 +79,6 @@ struct pltfm_imx_data {
 	int flags;
 	u32 scratchpad;
 	enum imx_esdhc_type devtype;
-	struct pinctrl *pinctrl;
 	struct esdhc_platform_data boarddata;
 	struct clk *clk_ipg;
 	struct clk *clk_ahb;
@@ -568,12 +566,6 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
 	clk_prepare_enable(imx_data->clk_ipg);
 	clk_prepare_enable(imx_data->clk_ahb);
 
-	imx_data->pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
-	if (IS_ERR(imx_data->pinctrl)) {
-		err = PTR_ERR(imx_data->pinctrl);
-		goto disable_clk;
-	}
-
 	host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
 
 	if (is_imx25_esdhc(imx_data) || is_imx35_esdhc(imx_data))
-- 
1.8.4.rc3

Re: [PATCH 2/4] drivers/mmc/host: don't use devm_pinctrl_get_select_default() in probe

[Romain Izard]

On 2013-10-13, Wolfram Sang <wsa@the-dreams.de> wrote:
> Since commit ab78029 (drivers/pinctrl: grab default handles from device core),
> we can rely on device core for setting the default pins. Compile tested only.
>
> Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13)
> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
> ---
>  drivers/mmc/host/mvsdio.c          | 7 +------
>  drivers/mmc/host/omap_hsmmc.c      | 7 -------
>  drivers/mmc/host/sdhci-esdhc-imx.c | 8 --------
>  3 files changed, 1 insertion(+), 21 deletions(-)
>
> diff --git a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c
> index 06c5b0b..8c9f448 100644
> --- a/drivers/mmc/host/mvsdio.c
> +++ b/drivers/mmc/host/mvsdio.c
> @@ -25,7 +25,6 @@
>  #include <linux/of_irq.h>
>  #include <linux/mmc/host.h>
>  #include <linux/mmc/slot-gpio.h>
> -#include <linux/pinctrl/consumer.h>
>  
>  #include <asm/sizes.h>
>  #include <asm/unaligned.h>
> @@ -685,7 +684,7 @@ static int __init mvsd_probe(struct platform_device *pdev)
>  	const struct mbus_dram_target_info *dram;
>  	struct resource *r;
>  	int ret, irq;
> -	struct pinctrl *pinctrl;
> +	int gpio_card_detect, gpio_write_protect;
>  

This new line does not belong to this patch.

>  	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>  	irq = platform_get_irq(pdev, 0);
> @@ -702,10 +701,6 @@ static int __init mvsd_probe(struct platform_device *pdev)
>  	host->mmc = mmc;
>  	host->dev = &pdev->dev;
>  
> -	pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
> -	if (IS_ERR(pinctrl))
> -		dev_warn(&pdev->dev, "no pins associated\n");
> -
>  	/*
>  	 * Some non-DT platforms do not pass a clock, and the clock
>  	 * frequency is passed through platform_data. On DT platforms,

Best regards,
-- 
Romain Izard

Re: [PATCH 2/4] drivers/mmc/host: don't use devm_pinctrl_get_select_default() in probe

[Romain Izard]

On 2013-10-13, Wolfram Sang <wsa@the-dreams.de> wrote:
> Since commit ab78029 (drivers/pinctrl: grab default handles from device core),
> we can rely on device core for setting the default pins. Compile tested only.
>
> Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13)
> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
> ---
>  drivers/mmc/host/mvsdio.c          | 7 +------
>  drivers/mmc/host/omap_hsmmc.c      | 7 -------
>  drivers/mmc/host/sdhci-esdhc-imx.c | 8 --------
>  3 files changed, 1 insertion(+), 21 deletions(-)
>
> diff --git a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c
> index 06c5b0b..8c9f448 100644
> --- a/drivers/mmc/host/mvsdio.c
> +++ b/drivers/mmc/host/mvsdio.c
> @@ -25,7 +25,6 @@
>  #include <linux/of_irq.h>
>  #include <linux/mmc/host.h>
>  #include <linux/mmc/slot-gpio.h>
> -#include <linux/pinctrl/consumer.h>
>  
>  #include <asm/sizes.h>
>  #include <asm/unaligned.h>
> @@ -685,7 +684,7 @@ static int __init mvsd_probe(struct platform_device *pdev)
>  	const struct mbus_dram_target_info *dram;
>  	struct resource *r;
>  	int ret, irq;
> -	struct pinctrl *pinctrl;
> +	int gpio_card_detect, gpio_write_protect;
>  

This new line does not belong to this patch.

>  	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>  	irq = platform_get_irq(pdev, 0);
> @@ -702,10 +701,6 @@ static int __init mvsd_probe(struct platform_device *pdev)
>  	host->mmc = mmc;
>  	host->dev = &pdev->dev;
>  
> -	pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
> -	if (IS_ERR(pinctrl))
> -		dev_warn(&pdev->dev, "no pins associated\n");
> -
>  	/*
>  	 * Some non-DT platforms do not pass a clock, and the clock
>  	 * frequency is passed through platform_data. On DT platforms,

Best regards,
-- 
Romain Izard

[PATCH 3/4] drivers/pwm: don't use devm_pinctrl_get_select_default() in probe

[Wolfram Sang]

Since commit ab78029 (drivers/pinctrl: grab default handles from device core),
we can rely on device core for setting the default pins. Compile tested only.

Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13)
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
---
 drivers/pwm/pwm-tiecap.c   | 6 ------
 drivers/pwm/pwm-tiehrpwm.c | 6 ------
 2 files changed, 12 deletions(-)

diff --git a/drivers/pwm/pwm-tiecap.c b/drivers/pwm/pwm-tiecap.c
index c2e2e58..4e5c3d1 100644
--- a/drivers/pwm/pwm-tiecap.c
+++ b/drivers/pwm/pwm-tiecap.c
@@ -26,7 +26,6 @@
 #include <linux/pm_runtime.h>
 #include <linux/pwm.h>
 #include <linux/of_device.h>
-#include <linux/pinctrl/consumer.h>
 
 #include "pwm-tipwmss.h"
 
@@ -208,11 +207,6 @@ static int ecap_pwm_probe(struct platform_device *pdev)
 	struct clk *clk;
 	struct ecap_pwm_chip *pc;
 	u16 status;
-	struct pinctrl *pinctrl;
-
-	pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
-	if (IS_ERR(pinctrl))
-		dev_warn(&pdev->dev, "unable to select pin group\n");
 
 	pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL);
 	if (!pc) {
diff --git a/drivers/pwm/pwm-tiehrpwm.c b/drivers/pwm/pwm-tiehrpwm.c
index 084f552..a4d8f51 100644
--- a/drivers/pwm/pwm-tiehrpwm.c
+++ b/drivers/pwm/pwm-tiehrpwm.c
@@ -26,7 +26,6 @@
 #include <linux/clk.h>
 #include <linux/pm_runtime.h>
 #include <linux/of_device.h>
-#include <linux/pinctrl/consumer.h>
 
 #include "pwm-tipwmss.h"
 
@@ -439,11 +438,6 @@ static int ehrpwm_pwm_probe(struct platform_device *pdev)
 	struct clk *clk;
 	struct ehrpwm_pwm_chip *pc;
 	u16 status;
-	struct pinctrl *pinctrl;
-
-	pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
-	if (IS_ERR(pinctrl))
-		dev_warn(&pdev->dev, "unable to select pin group\n");
 
 	pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL);
 	if (!pc) {
-- 
1.8.4.rc3

[PATCH 3/4] drivers/pwm: don't use devm_pinctrl_get_select_default() in probe

[Wolfram Sang]

Since commit ab78029 (drivers/pinctrl: grab default handles from device core),
we can rely on device core for setting the default pins. Compile tested only.

Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13)
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
---
 drivers/pwm/pwm-tiecap.c   | 6 ------
 drivers/pwm/pwm-tiehrpwm.c | 6 ------
 2 files changed, 12 deletions(-)

diff --git a/drivers/pwm/pwm-tiecap.c b/drivers/pwm/pwm-tiecap.c
index c2e2e58..4e5c3d1 100644
--- a/drivers/pwm/pwm-tiecap.c
+++ b/drivers/pwm/pwm-tiecap.c
@@ -26,7 +26,6 @@
 #include <linux/pm_runtime.h>
 #include <linux/pwm.h>
 #include <linux/of_device.h>
-#include <linux/pinctrl/consumer.h>
 
 #include "pwm-tipwmss.h"
 
@@ -208,11 +207,6 @@ static int ecap_pwm_probe(struct platform_device *pdev)
 	struct clk *clk;
 	struct ecap_pwm_chip *pc;
 	u16 status;
-	struct pinctrl *pinctrl;
-
-	pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
-	if (IS_ERR(pinctrl))
-		dev_warn(&pdev->dev, "unable to select pin group\n");
 
 	pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL);
 	if (!pc) {
diff --git a/drivers/pwm/pwm-tiehrpwm.c b/drivers/pwm/pwm-tiehrpwm.c
index 084f552..a4d8f51 100644
--- a/drivers/pwm/pwm-tiehrpwm.c
+++ b/drivers/pwm/pwm-tiehrpwm.c
@@ -26,7 +26,6 @@
 #include <linux/clk.h>
 #include <linux/pm_runtime.h>
 #include <linux/of_device.h>
-#include <linux/pinctrl/consumer.h>
 
 #include "pwm-tipwmss.h"
 
@@ -439,11 +438,6 @@ static int ehrpwm_pwm_probe(struct platform_device *pdev)
 	struct clk *clk;
 	struct ehrpwm_pwm_chip *pc;
 	u16 status;
-	struct pinctrl *pinctrl;
-
-	pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
-	if (IS_ERR(pinctrl))
-		dev_warn(&pdev->dev, "unable to select pin group\n");
 
 	pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL);
 	if (!pc) {
-- 
1.8.4.rc3

Re: [PATCH 3/4] drivers/pwm: don't use devm_pinctrl_get_select_default() in probe

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 516 bytes --]

On Sun, Oct 13, 2013 at 06:17:49PM +0200, Wolfram Sang wrote:
> Since commit ab78029 (drivers/pinctrl: grab default handles from device core),
> we can rely on device core for setting the default pins. Compile tested only.
> 
> Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13)
> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
> ---
>  drivers/pwm/pwm-tiecap.c   | 6 ------
>  drivers/pwm/pwm-tiehrpwm.c | 6 ------
>  2 files changed, 12 deletions(-)

Applied, thanks.

Thierry

[-- Attachment #2: Type: application/pgp-signature, Size: 836 bytes --]

[PATCH 3/4] drivers/pwm: don't use devm_pinctrl_get_select_default() in probe

[Thierry Reding]

On Sun, Oct 13, 2013 at 06:17:49PM +0200, Wolfram Sang wrote:
> Since commit ab78029 (drivers/pinctrl: grab default handles from device core),
> we can rely on device core for setting the default pins. Compile tested only.
> 
> Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13)
> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
> ---
>  drivers/pwm/pwm-tiecap.c   | 6 ------
>  drivers/pwm/pwm-tiehrpwm.c | 6 ------
>  2 files changed, 12 deletions(-)

Applied, thanks.

Thierry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20131015/633e8b9a/attachment.sig>

Re: [PATCH 3/4] drivers/pwm: don't use devm_pinctrl_get_select_default() in probe

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 516 bytes --]

On Sun, Oct 13, 2013 at 06:17:49PM +0200, Wolfram Sang wrote:
> Since commit ab78029 (drivers/pinctrl: grab default handles from device core),
> we can rely on device core for setting the default pins. Compile tested only.
> 
> Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13)
> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
> ---
>  drivers/pwm/pwm-tiecap.c   | 6 ------
>  drivers/pwm/pwm-tiehrpwm.c | 6 ------
>  2 files changed, 12 deletions(-)

Applied, thanks.

Thierry

[-- Attachment #2: Type: application/pgp-signature, Size: 836 bytes --]

[PATCH 3/4] drivers/pwm: don't use devm_pinctrl_get_select_default() in probe

[Thierry Reding]

On Sun, Oct 13, 2013 at 06:17:49PM +0200, Wolfram Sang wrote:
> Since commit ab78029 (drivers/pinctrl: grab default handles from device core),
> we can rely on device core for setting the default pins. Compile tested only.
> 
> Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13)
> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
> ---
>  drivers/pwm/pwm-tiecap.c   | 6 ------
>  drivers/pwm/pwm-tiehrpwm.c | 6 ------
>  2 files changed, 12 deletions(-)

Applied, thanks.

Thierry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20131022/8d23fbef/attachment.sig>

[PATCH 4/4] sound/soc/atmel: don't use devm_pinctrl_get_select_default() in probe

[Wolfram Sang]

Since commit ab78029 (drivers/pinctrl: grab default handles from device core),
we can rely on device core for setting the default pins.

Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13)
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
---
 sound/soc/atmel/atmel_wm8904.c | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/sound/soc/atmel/atmel_wm8904.c b/sound/soc/atmel/atmel_wm8904.c
index 7222380..b4e3690 100644
--- a/sound/soc/atmel/atmel_wm8904.c
+++ b/sound/soc/atmel/atmel_wm8904.c
@@ -12,7 +12,6 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
-#include <linux/pinctrl/consumer.h>
 
 #include <sound/soc.h>
 
@@ -155,15 +154,8 @@ static int atmel_asoc_wm8904_probe(struct platform_device *pdev)
 	struct snd_soc_card *card = &atmel_asoc_wm8904_card;
 	struct snd_soc_dai_link *dailink = &atmel_asoc_wm8904_dailink;
 	struct clk *clk_src;
-	struct pinctrl *pinctrl;
 	int id, ret;
 
-	pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
-	if (IS_ERR(pinctrl)) {
-		dev_err(&pdev->dev, "failed to request pinctrl\n");
-		return PTR_ERR(pinctrl);
-	}
-
 	card->dev = &pdev->dev;
 	ret = atmel_asoc_wm8904_dt_init(pdev);
 	if (ret) {
-- 
1.8.4.rc3

[PATCH 4/4] sound/soc/atmel: don't use devm_pinctrl_get_select_default() in probe

[Wolfram Sang]

Since commit ab78029 (drivers/pinctrl: grab default handles from device core),
we can rely on device core for setting the default pins.

Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13)
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
---
 sound/soc/atmel/atmel_wm8904.c | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/sound/soc/atmel/atmel_wm8904.c b/sound/soc/atmel/atmel_wm8904.c
index 7222380..b4e3690 100644
--- a/sound/soc/atmel/atmel_wm8904.c
+++ b/sound/soc/atmel/atmel_wm8904.c
@@ -12,7 +12,6 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
-#include <linux/pinctrl/consumer.h>
 
 #include <sound/soc.h>
 
@@ -155,15 +154,8 @@ static int atmel_asoc_wm8904_probe(struct platform_device *pdev)
 	struct snd_soc_card *card = &atmel_asoc_wm8904_card;
 	struct snd_soc_dai_link *dailink = &atmel_asoc_wm8904_dailink;
 	struct clk *clk_src;
-	struct pinctrl *pinctrl;
 	int id, ret;
 
-	pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
-	if (IS_ERR(pinctrl)) {
-		dev_err(&pdev->dev, "failed to request pinctrl\n");
-		return PTR_ERR(pinctrl);
-	}
-
 	card->dev = &pdev->dev;
 	ret = atmel_asoc_wm8904_dt_init(pdev);
 	if (ret) {
-- 
1.8.4.rc3

[PATCH 4/4] sound/soc/atmel: don't use devm_pinctrl_get_select_default() in probe

[Wolfram Sang]

Since commit ab78029 (drivers/pinctrl: grab default handles from device core),
we can rely on device core for setting the default pins.

Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13)
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
---
 sound/soc/atmel/atmel_wm8904.c | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/sound/soc/atmel/atmel_wm8904.c b/sound/soc/atmel/atmel_wm8904.c
index 7222380..b4e3690 100644
--- a/sound/soc/atmel/atmel_wm8904.c
+++ b/sound/soc/atmel/atmel_wm8904.c
@@ -12,7 +12,6 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
-#include <linux/pinctrl/consumer.h>
 
 #include <sound/soc.h>
 
@@ -155,15 +154,8 @@ static int atmel_asoc_wm8904_probe(struct platform_device *pdev)
 	struct snd_soc_card *card = &atmel_asoc_wm8904_card;
 	struct snd_soc_dai_link *dailink = &atmel_asoc_wm8904_dailink;
 	struct clk *clk_src;
-	struct pinctrl *pinctrl;
 	int id, ret;
 
-	pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
-	if (IS_ERR(pinctrl)) {
-		dev_err(&pdev->dev, "failed to request pinctrl\n");
-		return PTR_ERR(pinctrl);
-	}
-
 	card->dev = &pdev->dev;
 	ret = atmel_asoc_wm8904_dt_init(pdev);
 	if (ret) {
-- 
1.8.4.rc3

Re: [PATCH 4/4] sound/soc/atmel: don't use devm_pinctrl_get_select_default() in probe

[Bo Shen]

Hi Wolfram Sang,

On 10/14/2013 00:17, Wolfram Sang wrote:
> Since commit ab78029 (drivers/pinctrl: grab default handles from device core),
> we can rely on device core for setting the default pins.
>
> Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13)
> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
> ---
>   sound/soc/atmel/atmel_wm8904.c | 8 --------
>   1 file changed, 8 deletions(-)

Tested OK on at91sam9n12ek and sama5d3xek board.
Thanks.

Acked-by: Bo Shen <voice.shen@atmel.com>

Best Regards,
Bo Shen

[PATCH 4/4] sound/soc/atmel: don't use devm_pinctrl_get_select_default() in probe

[Bo Shen]

Hi Wolfram Sang,

On 10/14/2013 00:17, Wolfram Sang wrote:
> Since commit ab78029 (drivers/pinctrl: grab default handles from device core),
> we can rely on device core for setting the default pins.
>
> Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13)
> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
> ---
>   sound/soc/atmel/atmel_wm8904.c | 8 --------
>   1 file changed, 8 deletions(-)

Tested OK on at91sam9n12ek and sama5d3xek board.
Thanks.

Acked-by: Bo Shen <voice.shen@atmel.com>

Best Regards,
Bo Shen

Re: [PATCH 4/4] sound/soc/atmel: don't use devm_pinctrl_get_select_default() in probe

[Bo Shen]

Hi Wolfram Sang,

On 10/14/2013 00:17, Wolfram Sang wrote:
> Since commit ab78029 (drivers/pinctrl: grab default handles from device core),
> we can rely on device core for setting the default pins.
>
> Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13)
> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
> ---
>   sound/soc/atmel/atmel_wm8904.c | 8 --------
>   1 file changed, 8 deletions(-)

Tested OK on at91sam9n12ek and sama5d3xek board.
Thanks.

Acked-by: Bo Shen <voice.shen@atmel.com>

Best Regards,
Bo Shen

Re: [PATCH 4/4] sound/soc/atmel: don't use devm_pinctrl_get_select_default() in probe

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 276 bytes --]

On Sun, Oct 13, 2013 at 06:17:50PM +0200, Wolfram Sang wrote:
> Since commit ab78029 (drivers/pinctrl: grab default handles from device core),
> we can rely on device core for setting the default pins.

Applied, thanks.  Please use subject lines appropriate to the subsystem.

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[PATCH 4/4] sound/soc/atmel: don't use devm_pinctrl_get_select_default() in probe

[Mark Brown]

On Sun, Oct 13, 2013 at 06:17:50PM +0200, Wolfram Sang wrote:
> Since commit ab78029 (drivers/pinctrl: grab default handles from device core),
> we can rely on device core for setting the default pins.

Applied, thanks.  Please use subject lines appropriate to the subsystem.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20131014/4d5c61f3/attachment.sig>

Re: [PATCH 4/4] sound/soc/atmel: don't use devm_pinctrl_get_select_default() in probe

[Mark Brown]

[-- Attachment #1.1: Type: text/plain, Size: 276 bytes --]

On Sun, Oct 13, 2013 at 06:17:50PM +0200, Wolfram Sang wrote:
> Since commit ab78029 (drivers/pinctrl: grab default handles from device core),
> we can rely on device core for setting the default pins.

Applied, thanks.  Please use subject lines appropriate to the subsystem.

[-- Attachment #1.2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[-- Attachment #2: Type: text/plain, Size: 0 bytes --]

Re: [PATCH 4/4] sound/soc/atmel: don't use devm_pinctrl_get_select_default() in probe

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 208 bytes --]


> Applied, thanks.  Please use subject lines appropriate to the subsystem.

That's quite a nut to crack with a generated patch series running over
the whole tree. I wonder if it is really worth the effort?


[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[PATCH 4/4] sound/soc/atmel: don't use devm_pinctrl_get_select_default() in probe

[Wolfram Sang]

> Applied, thanks.  Please use subject lines appropriate to the subsystem.

That's quite a nut to crack with a generated patch series running over
the whole tree. I wonder if it is really worth the effort?

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20131014/4332a29e/attachment.sig>

Re: [PATCH 4/4] sound/soc/atmel: don't use devm_pinctrl_get_select_default() in probe

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 545 bytes --]

On Mon, Oct 14, 2013 at 04:56:29PM +0200, Wolfram Sang wrote:

> > Applied, thanks.  Please use subject lines appropriate to the subsystem.

> That's quite a nut to crack with a generated patch series running over
> the whole tree. I wonder if it is really worth the effort?

I think it's probably worth the effort to add something to put rules for
these things in MAINTAINERS, it'd cover 90% of cases.  If you're sending
only one of a big series with a subject line that won't pattern match
that's a good way to get stuff dropped on the floor.

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[PATCH 4/4] sound/soc/atmel: don't use devm_pinctrl_get_select_default() in probe

[Mark Brown]

On Mon, Oct 14, 2013 at 04:56:29PM +0200, Wolfram Sang wrote:

> > Applied, thanks.  Please use subject lines appropriate to the subsystem.

> That's quite a nut to crack with a generated patch series running over
> the whole tree. I wonder if it is really worth the effort?

I think it's probably worth the effort to add something to put rules for
these things in MAINTAINERS, it'd cover 90% of cases.  If you're sending
only one of a big series with a subject line that won't pattern match
that's a good way to get stuff dropped on the floor.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20131014/f19038b2/attachment.sig>

Re: [PATCH 4/4] sound/soc/atmel: don't use devm_pinctrl_get_select_default() in probe

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 751 bytes --]


> > > Applied, thanks.  Please use subject lines appropriate to the subsystem.
> 
> > That's quite a nut to crack with a generated patch series running over
> > the whole tree. I wonder if it is really worth the effort?
> 
> I think it's probably worth the effort to add something to put rules for
> these things in MAINTAINERS, it'd cover 90% of cases.  If you're sending
> only one of a big series with a subject line that won't pattern match
> that's a good way to get stuff dropped on the floor.

On the other hand, MAINTAINERS information gets overlooked and/or could
get stale. Thinking about it again, it is probably less work (at least
for me with i2c) to create a git-hook fixing the subject line than to
always nag people.


[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[PATCH 4/4] sound/soc/atmel: don't use devm_pinctrl_get_select_default() in probe

[Wolfram Sang]

> > > Applied, thanks.  Please use subject lines appropriate to the subsystem.
> 
> > That's quite a nut to crack with a generated patch series running over
> > the whole tree. I wonder if it is really worth the effort?
> 
> I think it's probably worth the effort to add something to put rules for
> these things in MAINTAINERS, it'd cover 90% of cases.  If you're sending
> only one of a big series with a subject line that won't pattern match
> that's a good way to get stuff dropped on the floor.

On the other hand, MAINTAINERS information gets overlooked and/or could
get stale. Thinking about it again, it is probably less work (at least
for me with i2c) to create a git-hook fixing the subject line than to
always nag people.

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20131017/e0b8d265/attachment.sig>

Re: [PATCH 4/4] sound/soc/atmel: don't use devm_pinctrl_get_select_default() in probe

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 503 bytes --]

On Thu, Oct 17, 2013 at 06:46:14PM +0200, Wolfram Sang wrote:

> On the other hand, MAINTAINERS information gets overlooked and/or could
> get stale. Thinking about it again, it is probably less work (at least
> for me with i2c) to create a git-hook fixing the subject line than to
> always nag people.

That doesn't fix the main problem which is getting the mail looked at in
the first place - not having a subject line that people are looking for
makes it easy for things to get dropped on the floor.

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[PATCH 4/4] sound/soc/atmel: don't use devm_pinctrl_get_select_default() in probe

[Mark Brown]

On Thu, Oct 17, 2013 at 06:46:14PM +0200, Wolfram Sang wrote:

> On the other hand, MAINTAINERS information gets overlooked and/or could
> get stale. Thinking about it again, it is probably less work (at least
> for me with i2c) to create a git-hook fixing the subject line than to
> always nag people.

That doesn't fix the main problem which is getting the mail looked at in
the first place - not having a subject line that people are looking for
makes it easy for things to get dropped on the floor.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20131017/5a9483e9/attachment.sig>