From: Rajeshwari S Shinde <rajeshwari.s@samsung.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 00/10 V6] EXYNOS5420: Add SMDK5420 board support
Date: Tue, 29 Oct 2013 12:53:03 +0530 [thread overview]
Message-ID: <1383031393-6093-1-git-send-email-rajeshwari.s@samsung.com> (raw)
This patch adds basic board support for SMDK5420 board.
These patches are tested for booting fine on EVT1 SMDK5420.
Changes in V2:
- Corrected a compilation issue for SMDK5420.
Changes in V3:
- Add patch to support variable size SPL support
- Add patch to disable SMU for eMMC.
Changes in V4:
- Added check for MAX77686 pmic compilation.
- Added correct calculation of gpio based addresses.
- Rebased on the latest u-boot code.
- Removed patches for UART and TZPC changes as
they were not needed.
- Added flag to disable SMU for eMMC.
Changes in V5:
- Moved functions board_mmc_init and board_eth_init
to common/board.c in case of device tree support.
Changes in V6:
- Rebased on the latest mainline branch.
- Moved the definitions for SMU to arch/arm dwmmc.h
Rajeshwari S Shinde (10):
EXYNOS5: Create a common board file
Exynos5420: Add base addresses for 5420
Exynos5420: Add clock initialization for 5420
Exynos5420: Add DDR3 initialization for 5420
Exynos5420: Add support for 5420 in pinmux and gpio
Exynos5420: Add base patch for SMDK5420
DTS: Add dts support for SMDK5420
Config: Add initial config for SMDK5420
SPL: EXYNOS: Prepare for variable size SPL support
DWMMC: SMDK5420: Disable SMU for eMMC
arch/arm/cpu/armv7/exynos/clock.c | 270 ++++++++-
arch/arm/cpu/armv7/exynos/clock_init.h | 17 +
arch/arm/cpu/armv7/exynos/clock_init_exynos5.c | 352 +++++++++++-
arch/arm/cpu/armv7/exynos/dmc_common.c | 10 +-
arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c | 421 +++++++++++++-
arch/arm/cpu/armv7/exynos/exynos5_setup.h | 740 +++++++++++++++++++------
arch/arm/cpu/armv7/exynos/pinmux.c | 241 +++++++-
arch/arm/dts/exynos5.dtsi | 211 +++++++
arch/arm/dts/exynos5250.dtsi | 178 +-----
arch/arm/dts/exynos5420.dtsi | 74 +++
arch/arm/include/asm/arch-exynos/board.h | 17 +
arch/arm/include/asm/arch-exynos/clk.h | 1 +
arch/arm/include/asm/arch-exynos/clock.h | 494 +++++++++++++++++
arch/arm/include/asm/arch-exynos/cpu.h | 53 +-
arch/arm/include/asm/arch-exynos/dmc.h | 121 ++--
arch/arm/include/asm/arch-exynos/dwmmc.h | 13 +
arch/arm/include/asm/arch-exynos/gpio.h | 143 ++++-
arch/arm/include/asm/arch-exynos/periph.h | 3 +
board/samsung/common/Makefile | 4 +
board/samsung/common/board.c | 407 ++++++++++++++
board/samsung/dts/exynos5420-smdk5420.dts | 172 ++++++
board/samsung/smdk5250/exynos5-dt.c | 361 +-----------
board/samsung/smdk5250/smdk5250.c | 182 +-----
board/samsung/smdk5420/Makefile | 34 ++
board/samsung/smdk5420/smdk5420.c | 159 ++++++
board/samsung/smdk5420/smdk5420_spl.c | 52 ++
boards.cfg | 1 +
drivers/mmc/dw_mmc.c | 11 +
drivers/mmc/exynos_dw_mmc.c | 3 +
include/configs/exynos5-dt.h | 302 ++++++++++
include/configs/exynos5250-dt.h | 317 +----------
include/configs/smdk5420.h | 56 ++
include/dwmmc.h | 3 +
spl/Makefile | 7 +-
tools/Makefile | 2 +
tools/mkexynosspl.c | 167 ++++--
36 files changed, 4271 insertions(+), 1328 deletions(-)
create mode 100644 arch/arm/dts/exynos5.dtsi
create mode 100644 arch/arm/dts/exynos5420.dtsi
create mode 100644 arch/arm/include/asm/arch-exynos/board.h
create mode 100644 board/samsung/common/board.c
create mode 100644 board/samsung/dts/exynos5420-smdk5420.dts
create mode 100644 board/samsung/smdk5420/Makefile
create mode 100644 board/samsung/smdk5420/smdk5420.c
create mode 100644 board/samsung/smdk5420/smdk5420_spl.c
create mode 100644 include/configs/exynos5-dt.h
create mode 100644 include/configs/smdk5420.h
--
1.7.12.4
next reply other threads:[~2013-10-29 7:23 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-29 7:23 Rajeshwari S Shinde [this message]
2013-10-29 7:23 ` [U-Boot] [PATCH 01/10 V6] EXYNOS5: Create a common board file Rajeshwari S Shinde
2013-11-08 8:13 ` Przemyslaw Marczak
2013-11-08 8:37 ` Rajeshwari Birje
2013-11-08 9:03 ` Przemyslaw Marczak
2013-11-08 9:27 ` Rajeshwari Birje
2013-11-08 9:46 ` Przemyslaw Marczak
2013-11-08 9:52 ` Rajeshwari Birje
2013-10-29 7:23 ` [U-Boot] [PATCH 02/10 V6] Exynos5420: Add base addresses for 5420 Rajeshwari S Shinde
2013-11-13 3:20 ` Minkyu Kang
2013-10-29 7:23 ` [U-Boot] [PATCH 03/10 V6] Exynos5420: Add clock initialization " Rajeshwari S Shinde
2013-11-13 2:45 ` Minkyu Kang
2013-11-13 11:17 ` Rajeshwari Birje
2013-11-14 1:56 ` Minkyu Kang
2013-10-29 7:23 ` [U-Boot] [PATCH 04/10 V6] Exynos5420: Add DDR3 " Rajeshwari S Shinde
2013-11-13 3:24 ` Minkyu Kang
2013-10-29 7:23 ` [U-Boot] [PATCH 05/10 V6] Exynos5420: Add support for 5420 in pinmux and gpio Rajeshwari S Shinde
2013-11-13 3:01 ` Minkyu Kang
2013-11-13 6:04 ` Rajeshwari Birje
2013-11-13 6:08 ` Rajeshwari Birje
2013-11-14 2:46 ` Minkyu Kang
2013-10-29 7:23 ` [U-Boot] [PATCH 06/10 V6] Exynos5420: Add base patch for SMDK5420 Rajeshwari S Shinde
2013-11-13 3:09 ` Minkyu Kang
2013-10-29 7:23 ` [U-Boot] [PATCH 07/10 V6] DTS: Add dts support " Rajeshwari S Shinde
2013-11-13 3:17 ` Minkyu Kang
2013-11-13 4:26 ` Rajeshwari Birje
2013-11-14 2:01 ` Minkyu Kang
2013-11-15 2:32 ` Rajeshwari Birje
2013-10-29 7:23 ` [U-Boot] [PATCH 08/10 V6] Config: Add initial config " Rajeshwari S Shinde
2013-11-13 3:31 ` Minkyu Kang
2013-10-29 7:23 ` [U-Boot] [PATCH 09/10 V6] SPL: EXYNOS: Prepare for variable size SPL support Rajeshwari S Shinde
2013-10-29 7:23 ` [U-Boot] [PATCH 10/10 V6] DWMMC: SMDK5420: Disable SMU for eMMC Rajeshwari S Shinde
2013-10-29 10:24 ` Jaehoon Chung
2013-10-31 7:50 ` Pantelis Antoniou
2013-10-31 8:42 ` [U-Boot] [PATCH 00/10 V6] EXYNOS5420: Add SMDK5420 board support Rajeshwari Birje
2013-11-06 11:42 ` Rajeshwari Birje
2013-11-07 1:32 ` Minkyu Kang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1383031393-6093-1-git-send-email-rajeshwari.s@samsung.com \
--to=rajeshwari.s@samsung.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.