All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rajeshwari Birje <rajeshwari.birje@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 00/10 V6] EXYNOS5420: Add SMDK5420 board support
Date: Thu, 31 Oct 2013 14:12:17 +0530	[thread overview]
Message-ID: <CAPs=JDfNyAXqMHpJ=41-RyTGJt_gYioDNqRjTOc8t4O2nDjphw@mail.gmail.com> (raw)
In-Reply-To: <1383031393-6093-1-git-send-email-rajeshwari.s@samsung.com>

Hi Minkyu Kang,

Kindly do review the patch set and do let me know if any review comments.
Pantelis Antoniou has merged the patch 10 (DWMMC: SMDK5420: Disable
SMU for eMMC) into mmc tree.

Regards,
Rajeshwari Shinde.

On Tue, Oct 29, 2013 at 12:53 PM, Rajeshwari S Shinde
<rajeshwari.s@samsung.com> wrote:
> This patch adds basic board support for SMDK5420 board.
> These patches are tested for booting fine on EVT1 SMDK5420.
>
> Changes in V2:
>         - Corrected a compilation issue for SMDK5420.
>
> Changes in V3:
>         - Add patch to support variable size SPL support
>         - Add patch to disable SMU for eMMC.
>
> Changes in V4:
>         - Added check for MAX77686 pmic compilation.
>         - Added correct calculation of gpio based addresses.
>         - Rebased on the latest u-boot code.
>         - Removed patches for UART and TZPC changes as
>         they were not needed.
>         - Added flag to disable SMU for eMMC.
>
> Changes in V5:
>         - Moved functions board_mmc_init and board_eth_init
>         to common/board.c in case of device tree support.
>
> Changes in V6:
>         - Rebased on the latest mainline branch.
>         - Moved the definitions for SMU to arch/arm dwmmc.h
>
> Rajeshwari S Shinde (10):
>   EXYNOS5: Create a common board file
>   Exynos5420: Add base addresses for 5420
>   Exynos5420: Add clock initialization for 5420
>   Exynos5420: Add DDR3 initialization for 5420
>   Exynos5420: Add support for 5420 in pinmux and gpio
>   Exynos5420: Add base patch for SMDK5420
>   DTS: Add dts support for SMDK5420
>   Config: Add initial config for SMDK5420
>   SPL: EXYNOS: Prepare for variable size SPL support
>   DWMMC: SMDK5420: Disable SMU for eMMC
>
>  arch/arm/cpu/armv7/exynos/clock.c              | 270 ++++++++-
>  arch/arm/cpu/armv7/exynos/clock_init.h         |  17 +
>  arch/arm/cpu/armv7/exynos/clock_init_exynos5.c | 352 +++++++++++-
>  arch/arm/cpu/armv7/exynos/dmc_common.c         |  10 +-
>  arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c      | 421 +++++++++++++-
>  arch/arm/cpu/armv7/exynos/exynos5_setup.h      | 740 +++++++++++++++++++------
>  arch/arm/cpu/armv7/exynos/pinmux.c             | 241 +++++++-
>  arch/arm/dts/exynos5.dtsi                      | 211 +++++++
>  arch/arm/dts/exynos5250.dtsi                   | 178 +-----
>  arch/arm/dts/exynos5420.dtsi                   |  74 +++
>  arch/arm/include/asm/arch-exynos/board.h       |  17 +
>  arch/arm/include/asm/arch-exynos/clk.h         |   1 +
>  arch/arm/include/asm/arch-exynos/clock.h       | 494 +++++++++++++++++
>  arch/arm/include/asm/arch-exynos/cpu.h         |  53 +-
>  arch/arm/include/asm/arch-exynos/dmc.h         | 121 ++--
>  arch/arm/include/asm/arch-exynos/dwmmc.h       |  13 +
>  arch/arm/include/asm/arch-exynos/gpio.h        | 143 ++++-
>  arch/arm/include/asm/arch-exynos/periph.h      |   3 +
>  board/samsung/common/Makefile                  |   4 +
>  board/samsung/common/board.c                   | 407 ++++++++++++++
>  board/samsung/dts/exynos5420-smdk5420.dts      | 172 ++++++
>  board/samsung/smdk5250/exynos5-dt.c            | 361 +-----------
>  board/samsung/smdk5250/smdk5250.c              | 182 +-----
>  board/samsung/smdk5420/Makefile                |  34 ++
>  board/samsung/smdk5420/smdk5420.c              | 159 ++++++
>  board/samsung/smdk5420/smdk5420_spl.c          |  52 ++
>  boards.cfg                                     |   1 +
>  drivers/mmc/dw_mmc.c                           |  11 +
>  drivers/mmc/exynos_dw_mmc.c                    |   3 +
>  include/configs/exynos5-dt.h                   | 302 ++++++++++
>  include/configs/exynos5250-dt.h                | 317 +----------
>  include/configs/smdk5420.h                     |  56 ++
>  include/dwmmc.h                                |   3 +
>  spl/Makefile                                   |   7 +-
>  tools/Makefile                                 |   2 +
>  tools/mkexynosspl.c                            | 167 ++++--
>  36 files changed, 4271 insertions(+), 1328 deletions(-)
>  create mode 100644 arch/arm/dts/exynos5.dtsi
>  create mode 100644 arch/arm/dts/exynos5420.dtsi
>  create mode 100644 arch/arm/include/asm/arch-exynos/board.h
>  create mode 100644 board/samsung/common/board.c
>  create mode 100644 board/samsung/dts/exynos5420-smdk5420.dts
>  create mode 100644 board/samsung/smdk5420/Makefile
>  create mode 100644 board/samsung/smdk5420/smdk5420.c
>  create mode 100644 board/samsung/smdk5420/smdk5420_spl.c
>  create mode 100644 include/configs/exynos5-dt.h
>  create mode 100644 include/configs/smdk5420.h
>
> --
> 1.7.12.4
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot



-- 
Regards,
Rajeshwari Shinde

  parent reply	other threads:[~2013-10-31  8:42 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-10-29  7:23 [U-Boot] [PATCH 00/10 V6] EXYNOS5420: Add SMDK5420 board support Rajeshwari S Shinde
2013-10-29  7:23 ` [U-Boot] [PATCH 01/10 V6] EXYNOS5: Create a common board file Rajeshwari S Shinde
2013-11-08  8:13   ` Przemyslaw Marczak
2013-11-08  8:37     ` Rajeshwari Birje
2013-11-08  9:03       ` Przemyslaw Marczak
2013-11-08  9:27         ` Rajeshwari Birje
2013-11-08  9:46           ` Przemyslaw Marczak
2013-11-08  9:52             ` Rajeshwari Birje
2013-10-29  7:23 ` [U-Boot] [PATCH 02/10 V6] Exynos5420: Add base addresses for 5420 Rajeshwari S Shinde
2013-11-13  3:20   ` Minkyu Kang
2013-10-29  7:23 ` [U-Boot] [PATCH 03/10 V6] Exynos5420: Add clock initialization " Rajeshwari S Shinde
2013-11-13  2:45   ` Minkyu Kang
2013-11-13 11:17     ` Rajeshwari Birje
2013-11-14  1:56       ` Minkyu Kang
2013-10-29  7:23 ` [U-Boot] [PATCH 04/10 V6] Exynos5420: Add DDR3 " Rajeshwari S Shinde
2013-11-13  3:24   ` Minkyu Kang
2013-10-29  7:23 ` [U-Boot] [PATCH 05/10 V6] Exynos5420: Add support for 5420 in pinmux and gpio Rajeshwari S Shinde
2013-11-13  3:01   ` Minkyu Kang
2013-11-13  6:04     ` Rajeshwari Birje
2013-11-13  6:08       ` Rajeshwari Birje
2013-11-14  2:46       ` Minkyu Kang
2013-10-29  7:23 ` [U-Boot] [PATCH 06/10 V6] Exynos5420: Add base patch for SMDK5420 Rajeshwari S Shinde
2013-11-13  3:09   ` Minkyu Kang
2013-10-29  7:23 ` [U-Boot] [PATCH 07/10 V6] DTS: Add dts support " Rajeshwari S Shinde
2013-11-13  3:17   ` Minkyu Kang
2013-11-13  4:26     ` Rajeshwari Birje
2013-11-14  2:01       ` Minkyu Kang
2013-11-15  2:32         ` Rajeshwari Birje
2013-10-29  7:23 ` [U-Boot] [PATCH 08/10 V6] Config: Add initial config " Rajeshwari S Shinde
2013-11-13  3:31   ` Minkyu Kang
2013-10-29  7:23 ` [U-Boot] [PATCH 09/10 V6] SPL: EXYNOS: Prepare for variable size SPL support Rajeshwari S Shinde
2013-10-29  7:23 ` [U-Boot] [PATCH 10/10 V6] DWMMC: SMDK5420: Disable SMU for eMMC Rajeshwari S Shinde
2013-10-29 10:24   ` Jaehoon Chung
2013-10-31  7:50   ` Pantelis Antoniou
2013-10-31  8:42 ` Rajeshwari Birje [this message]
2013-11-06 11:42   ` [U-Boot] [PATCH 00/10 V6] EXYNOS5420: Add SMDK5420 board support Rajeshwari Birje
2013-11-07  1:32     ` Minkyu Kang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAPs=JDfNyAXqMHpJ=41-RyTGJt_gYioDNqRjTOc8t4O2nDjphw@mail.gmail.com' \
    --to=rajeshwari.birje@gmail.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.