* Problem after update windows VirtIO drivers @ 2013-12-09 14:45 Carlos Rodrigues 2013-12-09 16:45 ` Alon Levy 0 siblings, 1 reply; 17+ messages in thread From: Carlos Rodrigues @ 2013-12-09 14:45 UTC (permalink / raw) To: kvm Hello, After update the VirtIO drivers for Windows Server 2008 R2 64-bit, when i reboot virtual machine, the windows OS get stuck on loading bar. The VirtIO drivers is the latest stable that i made the download from http://alt.fedoraproject.org/pub/alt/virtio-win/stable/virtio-win-0.1-74.iso And i use version 1.2.1 of kvm and the OS of host is Centos 5.8. I try to install a fresh and clean version same Windows and same drivers and get the same problem. With virtio-win-0.1-52 version of drivers, the windows server works properly. I will use the oldest stable version of drivers, but anyone knows some issue with latest drivers? Regards, -- Carlos Rodrigues Engenheiro de Software Sénior Eurotux Informática, S.A. | www.eurotux.com (t) +351 253 680 300 (m) +351 911 926 110 ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: Problem after update windows VirtIO drivers 2013-12-09 14:45 Problem after update windows VirtIO drivers Carlos Rodrigues @ 2013-12-09 16:45 ` Alon Levy 2013-12-09 20:13 ` Cole Robinson 2013-12-10 2:24 ` Vadim Rozenfeld 0 siblings, 2 replies; 17+ messages in thread From: Alon Levy @ 2013-12-09 16:45 UTC (permalink / raw) To: Carlos Rodrigues, kvm, Vadim Rozenfeld On 12/09/2013 04:45 PM, Carlos Rodrigues wrote: > Hello, > > After update the VirtIO drivers for Windows Server 2008 R2 64-bit, when > i reboot virtual machine, the windows OS get stuck on loading bar. > > The VirtIO drivers is the latest stable that i made the download from > http://alt.fedoraproject.org/pub/alt/virtio-win/stable/virtio-win-0.1-74.iso > > And i use version 1.2.1 of kvm and the OS of host is Centos 5.8. > > I try to install a fresh and clean version same Windows and same drivers > and get the same problem. With virtio-win-0.1-52 version of drivers, the > windows server works properly. > > I will use the oldest stable version of drivers, but anyone knows some > issue with latest drivers? > I have an issue that also existed with 0.65, on windows 7 64 bit: when I have qxl enabled as well I get a crash shortly after initialization of qxl (at the login screen) in a memory management function of the qxl driver, indicating something overwrote parts of the allocators accounting structures. When I disable the virtio driver (leaving the virtio device) the problem goes away. Vadim, is this a known problem? (sorry for hijacking the thread) > Regards, > ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: Problem after update windows VirtIO drivers 2013-12-09 16:45 ` Alon Levy @ 2013-12-09 20:13 ` Cole Robinson 2013-12-10 2:24 ` Vadim Rozenfeld 1 sibling, 0 replies; 17+ messages in thread From: Cole Robinson @ 2013-12-09 20:13 UTC (permalink / raw) To: Alon Levy, Carlos Rodrigues, kvm, Vadim Rozenfeld On 12/09/2013 11:45 AM, Alon Levy wrote: > On 12/09/2013 04:45 PM, Carlos Rodrigues wrote: >> Hello, >> >> After update the VirtIO drivers for Windows Server 2008 R2 64-bit, when >> i reboot virtual machine, the windows OS get stuck on loading bar. >> >> The VirtIO drivers is the latest stable that i made the download from >> http://alt.fedoraproject.org/pub/alt/virtio-win/stable/virtio-win-0.1-74.iso >> >> And i use version 1.2.1 of kvm and the OS of host is Centos 5.8. >> >> I try to install a fresh and clean version same Windows and same drivers >> and get the same problem. With virtio-win-0.1-52 version of drivers, the >> windows server works properly. >> >> I will use the oldest stable version of drivers, but anyone knows some >> issue with latest drivers? >> > > I have an issue that also existed with 0.65, on windows 7 64 bit: when I > have qxl enabled as well I get a crash shortly after initialization of > qxl (at the login screen) in a memory management function of the qxl > driver, indicating something overwrote parts of the allocators > accounting structures. When I disable the virtio driver (leaving the > virtio device) the problem goes away. > > Vadim, is this a known problem? (sorry for hijacking the thread) > I'd also recommend filing a bug at Fedora->virtio-win component in bugzilla.redhat.com where many of the windows guys keep watch. - Cole ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: Problem after update windows VirtIO drivers 2013-12-09 16:45 ` Alon Levy 2013-12-09 20:13 ` Cole Robinson @ 2013-12-10 2:24 ` Vadim Rozenfeld 2013-12-10 12:28 ` Carlos Rodrigues 2013-12-10 13:29 ` Alon Levy 1 sibling, 2 replies; 17+ messages in thread From: Vadim Rozenfeld @ 2013-12-10 2:24 UTC (permalink / raw) To: Alon Levy; +Cc: Carlos Rodrigues, kvm ----- Original Message ----- From: "Alon Levy" <alevy@redhat.com> To: "Carlos Rodrigues" <cmar@eurotux.com>, kvm@vger.kernel.org, "Vadim Rozenfeld" <vrozenfe@redhat.com> Sent: Tuesday, December 10, 2013 3:45:32 AM Subject: Re: Problem after update windows VirtIO drivers On 12/09/2013 04:45 PM, Carlos Rodrigues wrote: > Hello, > > After update the VirtIO drivers for Windows Server 2008 R2 64-bit, when > i reboot virtual machine, the windows OS get stuck on loading bar. > > The VirtIO drivers is the latest stable that i made the download from > http://alt.fedoraproject.org/pub/alt/virtio-win/stable/virtio-win-0.1-74.iso > > And i use version 1.2.1 of kvm and the OS of host is Centos 5.8. > > I try to install a fresh and clean version same Windows and same drivers > and get the same problem. With virtio-win-0.1-52 version of drivers, the > windows server works properly. > > I will use the oldest stable version of drivers, but anyone knows some > issue with latest drivers? > [VR] Hi Carlos, Could you please post the QEMU command line as well as output from 'info pci' I have an issue that also existed with 0.65, on windows 7 64 bit: when I have qxl enabled as well I get a crash shortly after initialization of qxl (at the login screen) in a memory management function of the qxl driver, indicating something overwrote parts of the allocators accounting structures. When I disable the virtio driver (leaving the virtio device) the problem goes away. Vadim, is this a known problem? (sorry for hijacking the thread) Does it crash into BSOD? Can you share the crash dump file? Best regards, Vadim. > Regards, > ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: Problem after update windows VirtIO drivers 2013-12-10 2:24 ` Vadim Rozenfeld @ 2013-12-10 12:28 ` Carlos Rodrigues 2013-12-11 8:26 ` Vadim Rozenfeld 2013-12-10 13:29 ` Alon Levy 1 sibling, 1 reply; 17+ messages in thread From: Carlos Rodrigues @ 2013-12-10 12:28 UTC (permalink / raw) To: Vadim Rozenfeld; +Cc: Alon Levy, kvm Hello Vadim, I'm using libvirt to help to configure the virtual machines, so the output of qemu command through libvirt is: # virsh qemu-monitor-command win-test --hmp --cmd 'info pci' Bus 0, device 0, function 0: Host bridge: PCI device 8086:1237 id "" Bus 0, device 1, function 0: ISA bridge: PCI device 8086:7000 id "" Bus 0, device 1, function 1: IDE controller: PCI device 8086:7010 BAR4: I/O at 0xc0c0 [0xc0cf]. id "" Bus 0, device 1, function 2: USB controller: PCI device 8086:7020 IRQ 5. BAR4: I/O at 0xc040 [0xc05f]. id "usb" Bus 0, device 1, function 3: Bridge: PCI device 8086:7113 IRQ 9. id "" Bus 0, device 2, function 0: VGA controller: PCI device 1013:00b8 BAR0: 32 bit prefetchable memory at 0xfc000000 [0xfdffffff]. BAR1: 32 bit memory at 0xfebf0000 [0xfebf0fff]. BAR6: 32 bit memory at 0xffffffffffffffff [0x0000fffe]. id "" Bus 0, device 3, function 0: Ethernet controller: PCI device 1af4:1000 IRQ 0. BAR0: I/O at 0xc060 [0xc07f]. BAR1: 32 bit memory at 0xfebf1000 [0xfebf1fff]. BAR6: 32 bit memory at 0xffffffffffffffff [0x0000fffe]. id "net0" Bus 0, device 4, function 0: Class 1920: PCI device 1af4:1003 IRQ 0. BAR0: I/O at 0xc080 [0xc09f]. BAR1: 32 bit memory at 0xfebf2000 [0xfebf2fff]. id "virtio-serial0" Bus 0, device 5, function 0: SCSI controller: PCI device 1af4:1001 IRQ 0. BAR0: I/O at 0xc000 [0xc03f]. BAR1: 32 bit memory at 0xfebf3000 [0xfebf3fff]. id "virtio-disk0" Bus 0, device 6, function 0: Class 0255: PCI device 1af4:1002 IRQ 5. BAR0: I/O at 0xc0a0 [0xc0bf]. id "balloon0" Regards, -- Carlos Rodrigues Engenheiro de Software Sénior Eurotux Informática, S.A. | www.eurotux.com (t) +351 253 680 300 (m) +351 911 926 110 On Seg, 2013-12-09 at 21:24 -0500, Vadim Rozenfeld wrote: > > ----- Original Message ----- > From: "Alon Levy" <alevy@redhat.com> > To: "Carlos Rodrigues" <cmar@eurotux.com>, kvm@vger.kernel.org, "Vadim Rozenfeld" <vrozenfe@redhat.com> > Sent: Tuesday, December 10, 2013 3:45:32 AM > Subject: Re: Problem after update windows VirtIO drivers > > On 12/09/2013 04:45 PM, Carlos Rodrigues wrote: > > Hello, > > > > After update the VirtIO drivers for Windows Server 2008 R2 64-bit, when > > i reboot virtual machine, the windows OS get stuck on loading bar. > > > > The VirtIO drivers is the latest stable that i made the download from > > http://alt.fedoraproject.org/pub/alt/virtio-win/stable/virtio-win-0.1-74.iso > > > > And i use version 1.2.1 of kvm and the OS of host is Centos 5.8. > > > > I try to install a fresh and clean version same Windows and same drivers > > and get the same problem. With virtio-win-0.1-52 version of drivers, the > > windows server works properly. > > > > I will use the oldest stable version of drivers, but anyone knows some > > issue with latest drivers? > > > [VR] > Hi Carlos, > Could you please post the QEMU command line as well as output > from 'info pci' > > I have an issue that also existed with 0.65, on windows 7 64 bit: when I > have qxl enabled as well I get a crash shortly after initialization of > qxl (at the login screen) in a memory management function of the qxl > driver, indicating something overwrote parts of the allocators > accounting structures. When I disable the virtio driver (leaving the > virtio device) the problem goes away. > > Vadim, is this a known problem? (sorry for hijacking the thread) > > Does it crash into BSOD? Can you share the crash dump file? > > Best regards, > Vadim. > > > > Regards, > > > ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: Problem after update windows VirtIO drivers 2013-12-10 12:28 ` Carlos Rodrigues @ 2013-12-11 8:26 ` Vadim Rozenfeld 2013-12-11 9:46 ` Carlos Rodrigues 0 siblings, 1 reply; 17+ messages in thread From: Vadim Rozenfeld @ 2013-12-11 8:26 UTC (permalink / raw) To: Carlos Rodrigues; +Cc: Alon Levy, kvm On Tue, 2013-12-10 at 12:28 +0000, Carlos Rodrigues wrote: > Hello Vadim, > > I'm using libvirt to help to configure the virtual machines, so the > output of qemu command through libvirt is: > > # virsh qemu-monitor-command win-test --hmp --cmd 'info pci' > Bus 0, device 0, function 0: > Host bridge: PCI device 8086:1237 > id "" > Bus 0, device 1, function 0: > ISA bridge: PCI device 8086:7000 > id "" > Bus 0, device 1, function 1: > IDE controller: PCI device 8086:7010 > BAR4: I/O at 0xc0c0 [0xc0cf]. > id "" > Bus 0, device 1, function 2: > USB controller: PCI device 8086:7020 > IRQ 5. > BAR4: I/O at 0xc040 [0xc05f]. > id "usb" > Bus 0, device 1, function 3: > Bridge: PCI device 8086:7113 > IRQ 9. > id "" > Bus 0, device 2, function 0: > VGA controller: PCI device 1013:00b8 > BAR0: 32 bit prefetchable memory at 0xfc000000 [0xfdffffff]. > BAR1: 32 bit memory at 0xfebf0000 [0xfebf0fff]. > BAR6: 32 bit memory at 0xffffffffffffffff [0x0000fffe]. > id "" > Bus 0, device 3, function 0: > Ethernet controller: PCI device 1af4:1000 > IRQ 0. > BAR0: I/O at 0xc060 [0xc07f]. > BAR1: 32 bit memory at 0xfebf1000 [0xfebf1fff]. > BAR6: 32 bit memory at 0xffffffffffffffff [0x0000fffe]. > id "net0" > Bus 0, device 4, function 0: > Class 1920: PCI device 1af4:1003 > IRQ 0. > BAR0: I/O at 0xc080 [0xc09f]. > BAR1: 32 bit memory at 0xfebf2000 [0xfebf2fff]. > id "virtio-serial0" > Bus 0, device 5, function 0: > SCSI controller: PCI device 1af4:1001 > IRQ 0. > BAR0: I/O at 0xc000 [0xc03f]. > BAR1: 32 bit memory at 0xfebf3000 [0xfebf3fff]. > id "virtio-disk0" Can you please try switching virtio-blk device to ide and see if it helps? Thanks, Vadim. > Bus 0, device 6, function 0: > Class 0255: PCI device 1af4:1002 > IRQ 5. > BAR0: I/O at 0xc0a0 [0xc0bf]. > id "balloon0" > > Regards, > ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: Problem after update windows VirtIO drivers 2013-12-11 8:26 ` Vadim Rozenfeld @ 2013-12-11 9:46 ` Carlos Rodrigues 2013-12-11 10:07 ` Vadim Rozenfeld 0 siblings, 1 reply; 17+ messages in thread From: Carlos Rodrigues @ 2013-12-11 9:46 UTC (permalink / raw) To: Vadim Rozenfeld; +Cc: Alon Levy, kvm -- Carlos Rodrigues Engenheiro de Software Sénior Eurotux Informática, S.A. | www.eurotux.com (t) +351 253 680 300 (m) +351 911 926 110 On Qua, 2013-12-11 at 19:26 +1100, Vadim Rozenfeld wrote: > On Tue, 2013-12-10 at 12:28 +0000, Carlos Rodrigues wrote: > > Hello Vadim, > > > > I'm using libvirt to help to configure the virtual machines, so the > > output of qemu command through libvirt is: > > > > # virsh qemu-monitor-command win-test --hmp --cmd 'info pci' > > Bus 0, device 0, function 0: > > Host bridge: PCI device 8086:1237 > > id "" > > Bus 0, device 1, function 0: > > ISA bridge: PCI device 8086:7000 > > id "" > > Bus 0, device 1, function 1: > > IDE controller: PCI device 8086:7010 > > BAR4: I/O at 0xc0c0 [0xc0cf]. > > id "" > > Bus 0, device 1, function 2: > > USB controller: PCI device 8086:7020 > > IRQ 5. > > BAR4: I/O at 0xc040 [0xc05f]. > > id "usb" > > Bus 0, device 1, function 3: > > Bridge: PCI device 8086:7113 > > IRQ 9. > > id "" > > Bus 0, device 2, function 0: > > VGA controller: PCI device 1013:00b8 > > BAR0: 32 bit prefetchable memory at 0xfc000000 [0xfdffffff]. > > BAR1: 32 bit memory at 0xfebf0000 [0xfebf0fff]. > > BAR6: 32 bit memory at 0xffffffffffffffff [0x0000fffe]. > > id "" > > Bus 0, device 3, function 0: > > Ethernet controller: PCI device 1af4:1000 > > IRQ 0. > > BAR0: I/O at 0xc060 [0xc07f]. > > BAR1: 32 bit memory at 0xfebf1000 [0xfebf1fff]. > > BAR6: 32 bit memory at 0xffffffffffffffff [0x0000fffe]. > > id "net0" > > Bus 0, device 4, function 0: > > Class 1920: PCI device 1af4:1003 > > IRQ 0. > > BAR0: I/O at 0xc080 [0xc09f]. > > BAR1: 32 bit memory at 0xfebf2000 [0xfebf2fff]. > > id "virtio-serial0" > > Bus 0, device 5, function 0: > > SCSI controller: PCI device 1af4:1001 > > IRQ 0. > > BAR0: I/O at 0xc000 [0xc03f]. > > BAR1: 32 bit memory at 0xfebf3000 [0xfebf3fff]. > > id "virtio-disk0" > > Can you please try switching virtio-blk device to ide and > see if it helps? When i switch the virtio-blk device to ide i get a bluescreen. > > Thanks, > Vadim. > > > Bus 0, device 6, function 0: > > Class 0255: PCI device 1af4:1002 > > IRQ 5. > > BAR0: I/O at 0xc0a0 [0xc0bf]. > > id "balloon0" > > > > Regards, > > > > > -- > To unsubscribe from this list: send the line "unsubscribe kvm" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: Problem after update windows VirtIO drivers 2013-12-11 9:46 ` Carlos Rodrigues @ 2013-12-11 10:07 ` Vadim Rozenfeld 2013-12-11 12:16 ` Carlos Rodrigues 0 siblings, 1 reply; 17+ messages in thread From: Vadim Rozenfeld @ 2013-12-11 10:07 UTC (permalink / raw) To: Carlos Rodrigues; +Cc: Alon Levy, kvm -- Carlos Rodrigues Engenheiro de Software Sénior Eurotux Informática, S.A. | www.eurotux.com (t) +351 253 680 300 (m) +351 911 926 110 On Qua, 2013-12-11 at 19:26 +1100, Vadim Rozenfeld wrote: > On Tue, 2013-12-10 at 12:28 +0000, Carlos Rodrigues wrote: > > Hello Vadim, > > > > I'm using libvirt to help to configure the virtual machines, so the > > output of qemu command through libvirt is: > > > > # virsh qemu-monitor-command win-test --hmp --cmd 'info pci' > > Bus 0, device 0, function 0: > > Host bridge: PCI device 8086:1237 > > id "" > > Bus 0, device 1, function 0: > > ISA bridge: PCI device 8086:7000 > > id "" > > Bus 0, device 1, function 1: > > IDE controller: PCI device 8086:7010 > > BAR4: I/O at 0xc0c0 [0xc0cf]. > > id "" > > Bus 0, device 1, function 2: > > USB controller: PCI device 8086:7020 > > IRQ 5. > > BAR4: I/O at 0xc040 [0xc05f]. > > id "usb" > > Bus 0, device 1, function 3: > > Bridge: PCI device 8086:7113 > > IRQ 9. > > id "" > > Bus 0, device 2, function 0: > > VGA controller: PCI device 1013:00b8 > > BAR0: 32 bit prefetchable memory at 0xfc000000 [0xfdffffff]. > > BAR1: 32 bit memory at 0xfebf0000 [0xfebf0fff]. > > BAR6: 32 bit memory at 0xffffffffffffffff [0x0000fffe]. > > id "" > > Bus 0, device 3, function 0: > > Ethernet controller: PCI device 1af4:1000 > > IRQ 0. > > BAR0: I/O at 0xc060 [0xc07f]. > > BAR1: 32 bit memory at 0xfebf1000 [0xfebf1fff]. > > BAR6: 32 bit memory at 0xffffffffffffffff [0x0000fffe]. > > id "net0" > > Bus 0, device 4, function 0: > > Class 1920: PCI device 1af4:1003 > > IRQ 0. > > BAR0: I/O at 0xc080 [0xc09f]. > > BAR1: 32 bit memory at 0xfebf2000 [0xfebf2fff]. > > id "virtio-serial0" > > Bus 0, device 5, function 0: > > SCSI controller: PCI device 1af4:1001 > > IRQ 0. > > BAR0: I/O at 0xc000 [0xc03f]. > > BAR1: 32 bit memory at 0xfebf3000 [0xfebf3fff]. > > id "virtio-disk0" > > Can you please try switching virtio-blk device to ide and > see if it helps? When i switch the virtio-blk device to ide i get a bluescreen. [VR] What is the bugcheck code you're getting? Can you capture and post BSOD screen image? Btw, if you install VM from scratch - do you see the same problems? Thanks, Vadim. > > Thanks, > Vadim. > > > Bus 0, device 6, function 0: > > Class 0255: PCI device 1af4:1002 > > IRQ 5. > > BAR0: I/O at 0xc0a0 [0xc0bf]. > > id "balloon0" > > > > Regards, > > > > > -- > To unsubscribe from this list: send the line "unsubscribe kvm" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.htmlOn Wed, 2013-12-11 at 09:46 +0000, Carlos Rodrigues wrote: > ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: Problem after update windows VirtIO drivers 2013-12-11 10:07 ` Vadim Rozenfeld @ 2013-12-11 12:16 ` Carlos Rodrigues 2013-12-13 10:25 ` Vadim Rozenfeld 0 siblings, 1 reply; 17+ messages in thread From: Carlos Rodrigues @ 2013-12-11 12:16 UTC (permalink / raw) To: Vadim Rozenfeld; +Cc: Alon Levy, kvm [-- Attachment #1: Type: text/plain, Size: 398 bytes --] I send in attachment the screen image of blue screen. About other question, with fresh installation with version 0.52 of drivers, and block device as ide, the reboot works properly. Regards, -- Carlos Rodrigues Engenheiro de Software Sénior Eurotux Informática, S.A. | www.eurotux.com (t) +351 253 680 300 (m) +351 911 926 110 On Qua, 2013-12-11 at 21:07 +1100, Vadim Rozenfeld wrote: [-- Attachment #2: bs_win3k8srv_virtio_76.png --] [-- Type: image/png, Size: 22901 bytes --] ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: Problem after update windows VirtIO drivers 2013-12-11 12:16 ` Carlos Rodrigues @ 2013-12-13 10:25 ` Vadim Rozenfeld 2013-12-13 14:35 ` Carlos Rodrigues 0 siblings, 1 reply; 17+ messages in thread From: Vadim Rozenfeld @ 2013-12-13 10:25 UTC (permalink / raw) To: bcao, Carlos Rodrigues; +Cc: Alon Levy, kvm On Wed, 2013-12-11 at 12:16 +0000, Carlos Rodrigues wrote: > I send in attachment the screen image of blue screen. > > About other question, with fresh installation with version 0.52 of > drivers, and block device as ide, the reboot works properly. > > Regards, > CC'ing Mike Mike do we have any backward compatibility issues, related to the latest driver virtio-win drivers on RHEL5.8 host? Thanks, Vadim. > On 12/09/2013 04:45 PM, Carlos Rodrigues wrote: > > Hello, > > > > After update the VirtIO drivers for Windows Server 2008 R2 64-bit, when > > i reboot virtual machine, the windows OS get stuck on loading bar. > > > > The VirtIO drivers is the latest stable that i made the download from > > http://alt.fedoraproject.org/pub/alt/virtio-win/stable/virtio-win-0.1-74.iso > > > > And i use version 1.2.1 of kvm and the OS of host is Centos 5.8. > > > > I try to install a fresh and clean version same Windows and same drivers > > and get the same problem. With virtio-win-0.1-52 version of drivers, the > > windows server works properly. > > > > I will use the oldest stable version of drivers, but anyone knows some > > issue with latest drivers? > > > [VR] > Hi Carlos, > Could you please post the QEMU command line as well as output > from 'info pci' > > I have an issue that also existed with 0.65, on windows 7 64 bit: when I > have qxl enabled as well I get a crash shortly after initialization of > qxl (at the login screen) in a memory management function of the qxl > driver, indicating something overwrote parts of the allocators > accounting structures. When I disable the virtio driver (leaving the > virtio device) the problem goes away. > > Vadim, is this a known problem? (sorry for hijacking the thread) > > Does it crash into BSOD? Can you share the crash dump file? > > Best regards, > Vadim. > > > > Regards, > > > ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: Problem after update windows VirtIO drivers 2013-12-13 10:25 ` Vadim Rozenfeld @ 2013-12-13 14:35 ` Carlos Rodrigues 2013-12-13 21:30 ` Vadim Rozenfeld 0 siblings, 1 reply; 17+ messages in thread From: Carlos Rodrigues @ 2013-12-13 14:35 UTC (permalink / raw) To: Vadim Rozenfeld; +Cc: bcao, Alon Levy, kvm Another test that i made was, if i have 1 vCPU the problem is reproducible, but if i increase to 2 vCPU, the Windows Server reboot without any problem. Regards, -- Carlos Rodrigues Engenheiro de Software Sénior Eurotux Informática, S.A. | www.eurotux.com (t) +351 253 680 300 (m) +351 911 926 110 On Sex, 2013-12-13 at 21:25 +1100, Vadim Rozenfeld wrote: > On Wed, 2013-12-11 at 12:16 +0000, Carlos Rodrigues wrote: > > I send in attachment the screen image of blue screen. > > > > About other question, with fresh installation with version 0.52 of > > drivers, and block device as ide, the reboot works properly. > > > > Regards, > > > CC'ing Mike > > Mike do we have any backward compatibility issues, > related to the latest driver virtio-win drivers > on RHEL5.8 host? > > Thanks, > Vadim. > > > On 12/09/2013 04:45 PM, Carlos Rodrigues wrote: > > > Hello, > > > > > > After update the VirtIO drivers for Windows Server 2008 R2 64-bit, > when > > > i reboot virtual machine, the windows OS get stuck on loading bar. > > > > > > The VirtIO drivers is the latest stable that i made the download > from > > > > http://alt.fedoraproject.org/pub/alt/virtio-win/stable/virtio-win-0.1-74.iso > > > > > > And i use version 1.2.1 of kvm and the OS of host is Centos 5.8. > > > > > > I try to install a fresh and clean version same Windows and same > drivers > > > and get the same problem. With virtio-win-0.1-52 version of drivers, > the > > > windows server works properly. > > > > > > I will use the oldest stable version of drivers, but anyone knows > some > > > issue with latest drivers? > > > > > [VR] > > Hi Carlos, > > Could you please post the QEMU command line as well as output > > from 'info pci' > > > > I have an issue that also existed with 0.65, on windows 7 64 bit: when > I > > have qxl enabled as well I get a crash shortly after initialization of > > qxl (at the login screen) in a memory management function of the qxl > > driver, indicating something overwrote parts of the allocators > > accounting structures. When I disable the virtio driver (leaving the > > virtio device) the problem goes away. > > > > Vadim, is this a known problem? (sorry for hijacking the thread) > > > > Does it crash into BSOD? Can you share the crash dump file? > > > > Best regards, > > Vadim. > > > > > > > Regards, > > > > > > > ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: Problem after update windows VirtIO drivers 2013-12-13 14:35 ` Carlos Rodrigues @ 2013-12-13 21:30 ` Vadim Rozenfeld 2013-12-17 9:43 ` Carlos Rodrigues 0 siblings, 1 reply; 17+ messages in thread From: Vadim Rozenfeld @ 2013-12-13 21:30 UTC (permalink / raw) To: Carlos Rodrigues; +Cc: bcao, Alon Levy, kvm On Fri, 2013-12-13 at 14:35 +0000, Carlos Rodrigues wrote: > Another test that i made was, if i have 1 vCPU the problem is > reproducible, but if i increase to 2 vCPU, the Windows Server reboot > without any problem. > > Regards, > Can you try 1 vCPU without virtio-serial? Thanks, Vadim. ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: Problem after update windows VirtIO drivers 2013-12-13 21:30 ` Vadim Rozenfeld @ 2013-12-17 9:43 ` Carlos Rodrigues 2013-12-29 10:09 ` Vadim Rozenfeld 0 siblings, 1 reply; 17+ messages in thread From: Carlos Rodrigues @ 2013-12-17 9:43 UTC (permalink / raw) To: Vadim Rozenfeld; +Cc: bcao, Alon Levy, kvm The problem still the same. Regards, -- Carlos Rodrigues Engenheiro de Software Sénior Eurotux Informática, S.A. | www.eurotux.com (t) +351 253 680 300 (m) +351 911 926 110 On Sáb, 2013-12-14 at 08:30 +1100, Vadim Rozenfeld wrote: > On Fri, 2013-12-13 at 14:35 +0000, Carlos Rodrigues wrote: > > Another test that i made was, if i have 1 vCPU the problem is > > reproducible, but if i increase to 2 vCPU, the Windows Server reboot > > without any problem. > > > > Regards, > > > Can you try 1 vCPU without virtio-serial? > > Thanks, > Vadim. > > -- > To unsubscribe from this list: send the line "unsubscribe kvm" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: Problem after update windows VirtIO drivers 2013-12-17 9:43 ` Carlos Rodrigues @ 2013-12-29 10:09 ` Vadim Rozenfeld 0 siblings, 0 replies; 17+ messages in thread From: Vadim Rozenfeld @ 2013-12-29 10:09 UTC (permalink / raw) To: Carlos Rodrigues; +Cc: bcao, Alon Levy, kvm Sorry for the late replay, Can you try crashing the system with NMI and share the crashdump file? You will need to enable NMICrashDump in the Registry ( http://support.microsoft.com/kb/927069 ), reboot the system, and issue NMI command from qemu monitor when the system is frozen. Thanks, Vadim. On Tue, 2013-12-17 at 09:43 +0000, Carlos Rodrigues wrote: > The problem still the same. > > Regards, > ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: Problem after update windows VirtIO drivers 2013-12-10 2:24 ` Vadim Rozenfeld 2013-12-10 12:28 ` Carlos Rodrigues @ 2013-12-10 13:29 ` Alon Levy 2013-12-11 9:27 ` Vadim Rozenfeld 1 sibling, 1 reply; 17+ messages in thread From: Alon Levy @ 2013-12-10 13:29 UTC (permalink / raw) To: Vadim Rozenfeld; +Cc: Carlos Rodrigues, kvm On 12/10/2013 04:24 AM, Vadim Rozenfeld wrote: > > > ----- Original Message ----- > From: "Alon Levy" <alevy@redhat.com> > To: "Carlos Rodrigues" <cmar@eurotux.com>, kvm@vger.kernel.org, "Vadim Rozenfeld" <vrozenfe@redhat.com> > Sent: Tuesday, December 10, 2013 3:45:32 AM > Subject: Re: Problem after update windows VirtIO drivers > > On 12/09/2013 04:45 PM, Carlos Rodrigues wrote: >> Hello, >> >> After update the VirtIO drivers for Windows Server 2008 R2 64-bit, when >> i reboot virtual machine, the windows OS get stuck on loading bar. >> >> The VirtIO drivers is the latest stable that i made the download from >> http://alt.fedoraproject.org/pub/alt/virtio-win/stable/virtio-win-0.1-74.iso >> >> And i use version 1.2.1 of kvm and the OS of host is Centos 5.8. >> >> I try to install a fresh and clean version same Windows and same drivers >> and get the same problem. With virtio-win-0.1-52 version of drivers, the >> windows server works properly. >> >> I will use the oldest stable version of drivers, but anyone knows some >> issue with latest drivers? >> > [VR] > Hi Carlos, > Could you please post the QEMU command line as well as output > from 'info pci' > > I have an issue that also existed with 0.65, on windows 7 64 bit: when I > have qxl enabled as well I get a crash shortly after initialization of > qxl (at the login screen) in a memory management function of the qxl > driver, indicating something overwrote parts of the allocators > accounting structures. When I disable the virtio driver (leaving the > virtio device) the problem goes away. > > Vadim, is this a known problem? (sorry for hijacking the thread) > > Does it crash into BSOD? Can you share the crash dump file? Yes, the stacktrace is in qxl, like I mentioned (DrvMouseMove) but that's not happening without the virtio driver being loaded. http://people.freedesktop.org/~alon/qxl-0.10-18-debug-virtio-0.74.DMP > > Best regards, > Vadim. > > >> Regards, >> > ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: Problem after update windows VirtIO drivers 2013-12-10 13:29 ` Alon Levy @ 2013-12-11 9:27 ` Vadim Rozenfeld 2013-12-11 12:40 ` Alon Levy 0 siblings, 1 reply; 17+ messages in thread From: Vadim Rozenfeld @ 2013-12-11 9:27 UTC (permalink / raw) To: Alon Levy; +Cc: Carlos Rodrigues, kvm On Tue, 2013-12-10 at 15:29 +0200, Alon Levy wrote: > On 12/10/2013 04:24 AM, Vadim Rozenfeld wrote: > > > > > > ----- Original Message ----- > > From: "Alon Levy" <alevy@redhat.com> > > To: "Carlos Rodrigues" <cmar@eurotux.com>, kvm@vger.kernel.org, "Vadim Rozenfeld" <vrozenfe@redhat.com> > > Sent: Tuesday, December 10, 2013 3:45:32 AM > > Subject: Re: Problem after update windows VirtIO drivers > > > > On 12/09/2013 04:45 PM, Carlos Rodrigues wrote: > >> Hello, > >> > >> After update the VirtIO drivers for Windows Server 2008 R2 64-bit, when > >> i reboot virtual machine, the windows OS get stuck on loading bar. > >> > >> The VirtIO drivers is the latest stable that i made the download from > >> http://alt.fedoraproject.org/pub/alt/virtio-win/stable/virtio-win-0.1-74.iso > >> > >> And i use version 1.2.1 of kvm and the OS of host is Centos 5.8. > >> > >> I try to install a fresh and clean version same Windows and same drivers > >> and get the same problem. With virtio-win-0.1-52 version of drivers, the > >> windows server works properly. > >> > >> I will use the oldest stable version of drivers, but anyone knows some > >> issue with latest drivers? > >> > > [VR] > > Hi Carlos, > > Could you please post the QEMU command line as well as output > > from 'info pci' > > > > I have an issue that also existed with 0.65, on windows 7 64 bit: when I > > have qxl enabled as well I get a crash shortly after initialization of > > qxl (at the login screen) in a memory management function of the qxl > > driver, indicating something overwrote parts of the allocators > > accounting structures. When I disable the virtio driver (leaving the > > virtio device) the problem goes away. > > > > Vadim, is this a known problem? (sorry for hijacking the thread) > > > > Does it crash into BSOD? Can you share the crash dump file? > > Yes, the stacktrace is in qxl, like I mentioned (DrvMouseMove) but > that's not happening without the virtio driver being loaded. > > http://people.freedesktop.org/~alon/qxl-0.10-18-debug-virtio-0.74.DMP > This time it happend in FlushReleaseRing->ReleaseOutput->DebugShowOutput path. It is a random crash? Btw, vioserial is the only one virtio driver in your system. If you are absolutely positive that the system doesn't crash without this driver, we can try running it under Driver Verifier control (http://support.microsoft.com/kb/244617) mostly interested in Memory Allocations checks. Cheers, Vadim. > > > > Best regards, > > Vadim. > > > > > >> Regards, > >> > > > ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: Problem after update windows VirtIO drivers 2013-12-11 9:27 ` Vadim Rozenfeld @ 2013-12-11 12:40 ` Alon Levy 0 siblings, 0 replies; 17+ messages in thread From: Alon Levy @ 2013-12-11 12:40 UTC (permalink / raw) To: Vadim Rozenfeld; +Cc: Carlos Rodrigues, kvm On 12/11/2013 11:27 AM, Vadim Rozenfeld wrote: > On Tue, 2013-12-10 at 15:29 +0200, Alon Levy wrote: >> On 12/10/2013 04:24 AM, Vadim Rozenfeld wrote: >>> >>> >>> ----- Original Message ----- >>> From: "Alon Levy" <alevy@redhat.com> >>> To: "Carlos Rodrigues" <cmar@eurotux.com>, kvm@vger.kernel.org, "Vadim Rozenfeld" <vrozenfe@redhat.com> >>> Sent: Tuesday, December 10, 2013 3:45:32 AM >>> Subject: Re: Problem after update windows VirtIO drivers >>> >>> On 12/09/2013 04:45 PM, Carlos Rodrigues wrote: >>>> Hello, >>>> >>>> After update the VirtIO drivers for Windows Server 2008 R2 64-bit, when >>>> i reboot virtual machine, the windows OS get stuck on loading bar. >>>> >>>> The VirtIO drivers is the latest stable that i made the download from >>>> http://alt.fedoraproject.org/pub/alt/virtio-win/stable/virtio-win-0.1-74.iso >>>> >>>> And i use version 1.2.1 of kvm and the OS of host is Centos 5.8. >>>> >>>> I try to install a fresh and clean version same Windows and same drivers >>>> and get the same problem. With virtio-win-0.1-52 version of drivers, the >>>> windows server works properly. >>>> >>>> I will use the oldest stable version of drivers, but anyone knows some >>>> issue with latest drivers? >>>> >>> [VR] >>> Hi Carlos, >>> Could you please post the QEMU command line as well as output >>> from 'info pci' >>> >>> I have an issue that also existed with 0.65, on windows 7 64 bit: when I >>> have qxl enabled as well I get a crash shortly after initialization of >>> qxl (at the login screen) in a memory management function of the qxl >>> driver, indicating something overwrote parts of the allocators >>> accounting structures. When I disable the virtio driver (leaving the >>> virtio device) the problem goes away. >>> >>> Vadim, is this a known problem? (sorry for hijacking the thread) >>> >>> Does it crash into BSOD? Can you share the crash dump file? >> >> Yes, the stacktrace is in qxl, like I mentioned (DrvMouseMove) but >> that's not happening without the virtio driver being loaded. >> >> http://people.freedesktop.org/~alon/qxl-0.10-18-debug-virtio-0.74.DMP >> > This time it happend in FlushReleaseRing->ReleaseOutput->DebugShowOutput > path. > > It is a random crash? It happens almost immediately after entering the login screen, that is after display driver has been initialized and sent already some commands. But the stack trace is not the same always as you saw for yourself (thanks - I didn't even check, I assumed it was the same as the last dump). > Btw, vioserial is the only one virtio driver in your system. Yep. > If you are absolutely positive that the system doesn't crash > without this driver, we can try running it under Driver Verifier > control (http://support.microsoft.com/kb/244617) mostly interested > in Memory Allocations checks. Yes, I'm positive. Thanks, I'll try that. > > Cheers, > Vadim. > >>> >>> Best regards, >>> Vadim. >>> >>> >>>> Regards, >>>> >>> >> > > ^ permalink raw reply [flat|nested] 17+ messages in thread
end of thread, other threads:[~2013-12-29 10:09 UTC | newest] Thread overview: 17+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2013-12-09 14:45 Problem after update windows VirtIO drivers Carlos Rodrigues 2013-12-09 16:45 ` Alon Levy 2013-12-09 20:13 ` Cole Robinson 2013-12-10 2:24 ` Vadim Rozenfeld 2013-12-10 12:28 ` Carlos Rodrigues 2013-12-11 8:26 ` Vadim Rozenfeld 2013-12-11 9:46 ` Carlos Rodrigues 2013-12-11 10:07 ` Vadim Rozenfeld 2013-12-11 12:16 ` Carlos Rodrigues 2013-12-13 10:25 ` Vadim Rozenfeld 2013-12-13 14:35 ` Carlos Rodrigues 2013-12-13 21:30 ` Vadim Rozenfeld 2013-12-17 9:43 ` Carlos Rodrigues 2013-12-29 10:09 ` Vadim Rozenfeld 2013-12-10 13:29 ` Alon Levy 2013-12-11 9:27 ` Vadim Rozenfeld 2013-12-11 12:40 ` Alon Levy
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.