All of lore.kernel.org
 help / color / mirror / Atom feed
From: Nicolas Pitre <nicolas.pitre@linaro.org>
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 3/6] PPC: remove redundant cpuidle_idle_call()
Date: Wed, 29 Jan 2014 17:45:10 +0000	[thread overview]
Message-ID: <1391017513-12995-4-git-send-email-nicolas.pitre@linaro.org> (raw)
In-Reply-To: <1391017513-12995-1-git-send-email-nicolas.pitre@linaro.org>

The core idle loop now takes care of it.  However a few things need
checking:

- Invocation of cpuidle_idle_call() in pseries_lpar_idle() happened
  through arch_cpu_idle() and was therefore always preceded by a call
  to ppc64_runlatch_off().  To preserve this property now that
  cpuidle_idle_call() is invoked directly from core code, a call to
  ppc64_runlatch_off() has been added to idle_loop_prolog() in
  platforms/pseries/processor_idle.c.

- Similarly, cpuidle_idle_call() was followed by ppc64_runlatch_off()
  so a call to the later has been added to idle_loop_epilog().

- And since arch_cpu_idle() always made sure to re-enable IRQs if they
  were not enabled, this is now
  done in idle_loop_epilog() as well.

The above was made in order to keep the execution flow close to the
original.  I don't know if that was strictly necessary. Someone well
aquainted with the platform details might find some room for possible
optimizations.

Signed-off-by: Nicolas Pitre <nico@linaro.org>
Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com>
---
 arch/powerpc/platforms/pseries/processor_idle.c |  5 ++++
 arch/powerpc/platforms/pseries/setup.c          | 34 ++++++++++---------------
 2 files changed, 19 insertions(+), 20 deletions(-)

diff --git a/arch/powerpc/platforms/pseries/processor_idle.c b/arch/powerpc/platforms/pseries/processor_idle.c
index a166e38bd6..72ddfe3d2f 100644
--- a/arch/powerpc/platforms/pseries/processor_idle.c
+++ b/arch/powerpc/platforms/pseries/processor_idle.c
@@ -33,6 +33,7 @@ static struct cpuidle_state *cpuidle_state_table;
 
 static inline void idle_loop_prolog(unsigned long *in_purr)
 {
+	ppc64_runlatch_off();
 	*in_purr = mfspr(SPRN_PURR);
 	/*
 	 * Indicate to the HV that we are idle. Now would be
@@ -49,6 +50,10 @@ static inline void idle_loop_epilog(unsigned long in_purr)
 	wait_cycles += mfspr(SPRN_PURR) - in_purr;
 	get_lppaca()->wait_state_cycles = cpu_to_be64(wait_cycles);
 	get_lppaca()->idle = 0;
+
+	if (irqs_disabled())
+		local_irq_enable();
+	ppc64_runlatch_on();
 }
 
 static int snooze_loop(struct cpuidle_device *dev,
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index c1f1908587..7604c19d54 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -39,7 +39,6 @@
 #include <linux/irq.h>
 #include <linux/seq_file.h>
 #include <linux/root_dev.h>
-#include <linux/cpuidle.h>
 #include <linux/of.h>
 #include <linux/kexec.h>
 
@@ -356,29 +355,24 @@ early_initcall(alloc_dispatch_log_kmem_cache);
 
 static void pseries_lpar_idle(void)
 {
-	/* This would call on the cpuidle framework, and the back-end pseries
-	 * driver to  go to idle states
+	/*
+	 * Default handler to go into low thread priority and possibly
+	 * low power mode by cedeing processor to hypervisor
 	 */
-	if (cpuidle_idle_call()) {
-		/* On error, execute default handler
-		 * to go into low thread priority and possibly
-		 * low power mode by cedeing processor to hypervisor
-		 */
 
-		/* Indicate to hypervisor that we are idle. */
-		get_lppaca()->idle = 1;
+	/* Indicate to hypervisor that we are idle. */
+	get_lppaca()->idle = 1;
 
-		/*
-		 * Yield the processor to the hypervisor.  We return if
-		 * an external interrupt occurs (which are driven prior
-		 * to returning here) or if a prod occurs from another
-		 * processor. When returning here, external interrupts
-		 * are enabled.
-		 */
-		cede_processor();
+	/*
+	 * Yield the processor to the hypervisor.  We return if
+	 * an external interrupt occurs (which are driven prior
+	 * to returning here) or if a prod occurs from another
+	 * processor. When returning here, external interrupts
+	 * are enabled.
+	 */
+	cede_processor();
 
-		get_lppaca()->idle = 0;
-	}
+	get_lppaca()->idle = 0;
 }
 
 /*
-- 
1.8.4.108.g55ea5f6


WARNING: multiple messages have this Message-ID (diff)
From: Nicolas Pitre <nicolas.pitre@linaro.org>
To: Russell King <linux@arm.linux.org.uk>,
	Benjamin Herrenschmidt <benh@kernel.crashing.org>,
	Preeti U Murthy <preeti@linux.vnet.ibm.com>,
	Paul Mundt <lethal@linux-sh.org>,
	Thomas Gleixner <tglx@linutronix.de>,
	Ingo Molnar <mingo@redhat.com>,
	Peter Zijlstra <peterz@infradead.org>,
	"Rafael J. Wysocki" <rjw@rjwysocki.net>,
	Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linuxppc-dev@lists.ozlabs.org, linux-sh@vger.kernel.org,
	linux-pm@vger.kernel.org, linaro-kernel@lists.linaro.org
Subject: [PATCH v2 3/6] PPC: remove redundant cpuidle_idle_call()
Date: Wed, 29 Jan 2014 12:45:10 -0500	[thread overview]
Message-ID: <1391017513-12995-4-git-send-email-nicolas.pitre@linaro.org> (raw)
In-Reply-To: <1391017513-12995-1-git-send-email-nicolas.pitre@linaro.org>

The core idle loop now takes care of it.  However a few things need
checking:

- Invocation of cpuidle_idle_call() in pseries_lpar_idle() happened
  through arch_cpu_idle() and was therefore always preceded by a call
  to ppc64_runlatch_off().  To preserve this property now that
  cpuidle_idle_call() is invoked directly from core code, a call to
  ppc64_runlatch_off() has been added to idle_loop_prolog() in
  platforms/pseries/processor_idle.c.

- Similarly, cpuidle_idle_call() was followed by ppc64_runlatch_off()
  so a call to the later has been added to idle_loop_epilog().

- And since arch_cpu_idle() always made sure to re-enable IRQs if they
  were not enabled, this is now
  done in idle_loop_epilog() as well.

The above was made in order to keep the execution flow close to the
original.  I don't know if that was strictly necessary. Someone well
aquainted with the platform details might find some room for possible
optimizations.

Signed-off-by: Nicolas Pitre <nico@linaro.org>
Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com>
---
 arch/powerpc/platforms/pseries/processor_idle.c |  5 ++++
 arch/powerpc/platforms/pseries/setup.c          | 34 ++++++++++---------------
 2 files changed, 19 insertions(+), 20 deletions(-)

diff --git a/arch/powerpc/platforms/pseries/processor_idle.c b/arch/powerpc/platforms/pseries/processor_idle.c
index a166e38bd6..72ddfe3d2f 100644
--- a/arch/powerpc/platforms/pseries/processor_idle.c
+++ b/arch/powerpc/platforms/pseries/processor_idle.c
@@ -33,6 +33,7 @@ static struct cpuidle_state *cpuidle_state_table;
 
 static inline void idle_loop_prolog(unsigned long *in_purr)
 {
+	ppc64_runlatch_off();
 	*in_purr = mfspr(SPRN_PURR);
 	/*
 	 * Indicate to the HV that we are idle. Now would be
@@ -49,6 +50,10 @@ static inline void idle_loop_epilog(unsigned long in_purr)
 	wait_cycles += mfspr(SPRN_PURR) - in_purr;
 	get_lppaca()->wait_state_cycles = cpu_to_be64(wait_cycles);
 	get_lppaca()->idle = 0;
+
+	if (irqs_disabled())
+		local_irq_enable();
+	ppc64_runlatch_on();
 }
 
 static int snooze_loop(struct cpuidle_device *dev,
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index c1f1908587..7604c19d54 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -39,7 +39,6 @@
 #include <linux/irq.h>
 #include <linux/seq_file.h>
 #include <linux/root_dev.h>
-#include <linux/cpuidle.h>
 #include <linux/of.h>
 #include <linux/kexec.h>
 
@@ -356,29 +355,24 @@ early_initcall(alloc_dispatch_log_kmem_cache);
 
 static void pseries_lpar_idle(void)
 {
-	/* This would call on the cpuidle framework, and the back-end pseries
-	 * driver to  go to idle states
+	/*
+	 * Default handler to go into low thread priority and possibly
+	 * low power mode by cedeing processor to hypervisor
 	 */
-	if (cpuidle_idle_call()) {
-		/* On error, execute default handler
-		 * to go into low thread priority and possibly
-		 * low power mode by cedeing processor to hypervisor
-		 */
 
-		/* Indicate to hypervisor that we are idle. */
-		get_lppaca()->idle = 1;
+	/* Indicate to hypervisor that we are idle. */
+	get_lppaca()->idle = 1;
 
-		/*
-		 * Yield the processor to the hypervisor.  We return if
-		 * an external interrupt occurs (which are driven prior
-		 * to returning here) or if a prod occurs from another
-		 * processor. When returning here, external interrupts
-		 * are enabled.
-		 */
-		cede_processor();
+	/*
+	 * Yield the processor to the hypervisor.  We return if
+	 * an external interrupt occurs (which are driven prior
+	 * to returning here) or if a prod occurs from another
+	 * processor. When returning here, external interrupts
+	 * are enabled.
+	 */
+	cede_processor();
 
-		get_lppaca()->idle = 0;
-	}
+	get_lppaca()->idle = 0;
 }
 
 /*
-- 
1.8.4.108.g55ea5f6


WARNING: multiple messages have this Message-ID (diff)
From: Nicolas Pitre <nicolas.pitre@linaro.org>
To: Russell King <linux@arm.linux.org.uk>,
	Benjamin Herrenschmidt <benh@kernel.crashing.org>,
	Preeti U Murthy <preeti@linux.vnet.ibm.com>,
	Paul Mundt <lethal@linux-sh.org>,
	Thomas Gleixner <tglx@linutronix.de>,
	Ingo Molnar <mingo@redhat.com>,
	Peter Zijlstra <peterz@infradead.org>,
	"Rafael J. Wysocki" <rjw@rjwysocki.net>,
	Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: linaro-kernel@lists.linaro.org, linux-pm@vger.kernel.org,
	linux-sh@vger.kernel.org, linux-kernel@vger.kernel.org,
	linuxppc-dev@lists.ozlabs.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 3/6] PPC: remove redundant cpuidle_idle_call()
Date: Wed, 29 Jan 2014 12:45:10 -0500	[thread overview]
Message-ID: <1391017513-12995-4-git-send-email-nicolas.pitre@linaro.org> (raw)
In-Reply-To: <1391017513-12995-1-git-send-email-nicolas.pitre@linaro.org>

The core idle loop now takes care of it.  However a few things need
checking:

- Invocation of cpuidle_idle_call() in pseries_lpar_idle() happened
  through arch_cpu_idle() and was therefore always preceded by a call
  to ppc64_runlatch_off().  To preserve this property now that
  cpuidle_idle_call() is invoked directly from core code, a call to
  ppc64_runlatch_off() has been added to idle_loop_prolog() in
  platforms/pseries/processor_idle.c.

- Similarly, cpuidle_idle_call() was followed by ppc64_runlatch_off()
  so a call to the later has been added to idle_loop_epilog().

- And since arch_cpu_idle() always made sure to re-enable IRQs if they
  were not enabled, this is now
  done in idle_loop_epilog() as well.

The above was made in order to keep the execution flow close to the
original.  I don't know if that was strictly necessary. Someone well
aquainted with the platform details might find some room for possible
optimizations.

Signed-off-by: Nicolas Pitre <nico@linaro.org>
Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com>
---
 arch/powerpc/platforms/pseries/processor_idle.c |  5 ++++
 arch/powerpc/platforms/pseries/setup.c          | 34 ++++++++++---------------
 2 files changed, 19 insertions(+), 20 deletions(-)

diff --git a/arch/powerpc/platforms/pseries/processor_idle.c b/arch/powerpc/platforms/pseries/processor_idle.c
index a166e38bd6..72ddfe3d2f 100644
--- a/arch/powerpc/platforms/pseries/processor_idle.c
+++ b/arch/powerpc/platforms/pseries/processor_idle.c
@@ -33,6 +33,7 @@ static struct cpuidle_state *cpuidle_state_table;
 
 static inline void idle_loop_prolog(unsigned long *in_purr)
 {
+	ppc64_runlatch_off();
 	*in_purr = mfspr(SPRN_PURR);
 	/*
 	 * Indicate to the HV that we are idle. Now would be
@@ -49,6 +50,10 @@ static inline void idle_loop_epilog(unsigned long in_purr)
 	wait_cycles += mfspr(SPRN_PURR) - in_purr;
 	get_lppaca()->wait_state_cycles = cpu_to_be64(wait_cycles);
 	get_lppaca()->idle = 0;
+
+	if (irqs_disabled())
+		local_irq_enable();
+	ppc64_runlatch_on();
 }
 
 static int snooze_loop(struct cpuidle_device *dev,
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index c1f1908587..7604c19d54 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -39,7 +39,6 @@
 #include <linux/irq.h>
 #include <linux/seq_file.h>
 #include <linux/root_dev.h>
-#include <linux/cpuidle.h>
 #include <linux/of.h>
 #include <linux/kexec.h>
 
@@ -356,29 +355,24 @@ early_initcall(alloc_dispatch_log_kmem_cache);
 
 static void pseries_lpar_idle(void)
 {
-	/* This would call on the cpuidle framework, and the back-end pseries
-	 * driver to  go to idle states
+	/*
+	 * Default handler to go into low thread priority and possibly
+	 * low power mode by cedeing processor to hypervisor
 	 */
-	if (cpuidle_idle_call()) {
-		/* On error, execute default handler
-		 * to go into low thread priority and possibly
-		 * low power mode by cedeing processor to hypervisor
-		 */
 
-		/* Indicate to hypervisor that we are idle. */
-		get_lppaca()->idle = 1;
+	/* Indicate to hypervisor that we are idle. */
+	get_lppaca()->idle = 1;
 
-		/*
-		 * Yield the processor to the hypervisor.  We return if
-		 * an external interrupt occurs (which are driven prior
-		 * to returning here) or if a prod occurs from another
-		 * processor. When returning here, external interrupts
-		 * are enabled.
-		 */
-		cede_processor();
+	/*
+	 * Yield the processor to the hypervisor.  We return if
+	 * an external interrupt occurs (which are driven prior
+	 * to returning here) or if a prod occurs from another
+	 * processor. When returning here, external interrupts
+	 * are enabled.
+	 */
+	cede_processor();
 
-		get_lppaca()->idle = 0;
-	}
+	get_lppaca()->idle = 0;
 }
 
 /*
-- 
1.8.4.108.g55ea5f6

WARNING: multiple messages have this Message-ID (diff)
From: nicolas.pitre@linaro.org (Nicolas Pitre)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 3/6] PPC: remove redundant cpuidle_idle_call()
Date: Wed, 29 Jan 2014 12:45:10 -0500	[thread overview]
Message-ID: <1391017513-12995-4-git-send-email-nicolas.pitre@linaro.org> (raw)
In-Reply-To: <1391017513-12995-1-git-send-email-nicolas.pitre@linaro.org>

The core idle loop now takes care of it.  However a few things need
checking:

- Invocation of cpuidle_idle_call() in pseries_lpar_idle() happened
  through arch_cpu_idle() and was therefore always preceded by a call
  to ppc64_runlatch_off().  To preserve this property now that
  cpuidle_idle_call() is invoked directly from core code, a call to
  ppc64_runlatch_off() has been added to idle_loop_prolog() in
  platforms/pseries/processor_idle.c.

- Similarly, cpuidle_idle_call() was followed by ppc64_runlatch_off()
  so a call to the later has been added to idle_loop_epilog().

- And since arch_cpu_idle() always made sure to re-enable IRQs if they
  were not enabled, this is now
  done in idle_loop_epilog() as well.

The above was made in order to keep the execution flow close to the
original.  I don't know if that was strictly necessary. Someone well
aquainted with the platform details might find some room for possible
optimizations.

Signed-off-by: Nicolas Pitre <nico@linaro.org>
Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com>
---
 arch/powerpc/platforms/pseries/processor_idle.c |  5 ++++
 arch/powerpc/platforms/pseries/setup.c          | 34 ++++++++++---------------
 2 files changed, 19 insertions(+), 20 deletions(-)

diff --git a/arch/powerpc/platforms/pseries/processor_idle.c b/arch/powerpc/platforms/pseries/processor_idle.c
index a166e38bd6..72ddfe3d2f 100644
--- a/arch/powerpc/platforms/pseries/processor_idle.c
+++ b/arch/powerpc/platforms/pseries/processor_idle.c
@@ -33,6 +33,7 @@ static struct cpuidle_state *cpuidle_state_table;
 
 static inline void idle_loop_prolog(unsigned long *in_purr)
 {
+	ppc64_runlatch_off();
 	*in_purr = mfspr(SPRN_PURR);
 	/*
 	 * Indicate to the HV that we are idle. Now would be
@@ -49,6 +50,10 @@ static inline void idle_loop_epilog(unsigned long in_purr)
 	wait_cycles += mfspr(SPRN_PURR) - in_purr;
 	get_lppaca()->wait_state_cycles = cpu_to_be64(wait_cycles);
 	get_lppaca()->idle = 0;
+
+	if (irqs_disabled())
+		local_irq_enable();
+	ppc64_runlatch_on();
 }
 
 static int snooze_loop(struct cpuidle_device *dev,
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index c1f1908587..7604c19d54 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -39,7 +39,6 @@
 #include <linux/irq.h>
 #include <linux/seq_file.h>
 #include <linux/root_dev.h>
-#include <linux/cpuidle.h>
 #include <linux/of.h>
 #include <linux/kexec.h>
 
@@ -356,29 +355,24 @@ early_initcall(alloc_dispatch_log_kmem_cache);
 
 static void pseries_lpar_idle(void)
 {
-	/* This would call on the cpuidle framework, and the back-end pseries
-	 * driver to  go to idle states
+	/*
+	 * Default handler to go into low thread priority and possibly
+	 * low power mode by cedeing processor to hypervisor
 	 */
-	if (cpuidle_idle_call()) {
-		/* On error, execute default handler
-		 * to go into low thread priority and possibly
-		 * low power mode by cedeing processor to hypervisor
-		 */
 
-		/* Indicate to hypervisor that we are idle. */
-		get_lppaca()->idle = 1;
+	/* Indicate to hypervisor that we are idle. */
+	get_lppaca()->idle = 1;
 
-		/*
-		 * Yield the processor to the hypervisor.  We return if
-		 * an external interrupt occurs (which are driven prior
-		 * to returning here) or if a prod occurs from another
-		 * processor. When returning here, external interrupts
-		 * are enabled.
-		 */
-		cede_processor();
+	/*
+	 * Yield the processor to the hypervisor.  We return if
+	 * an external interrupt occurs (which are driven prior
+	 * to returning here) or if a prod occurs from another
+	 * processor. When returning here, external interrupts
+	 * are enabled.
+	 */
+	cede_processor();
 
-		get_lppaca()->idle = 0;
-	}
+	get_lppaca()->idle = 0;
 }
 
 /*
-- 
1.8.4.108.g55ea5f6

  parent reply	other threads:[~2014-01-29 17:45 UTC|newest]

Thread overview: 130+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-01-29 17:45 [PATCH v2 0/6] setting the table for integration of cpuidle with the scheduler Nicolas Pitre
2014-01-29 17:45 ` Nicolas Pitre
2014-01-29 17:45 ` Nicolas Pitre
2014-01-29 17:45 ` Nicolas Pitre
2014-01-29 17:45 ` [PATCH v2 1/6] idle: move the cpuidle entry point to the generic idle loop Nicolas Pitre
2014-01-29 17:45   ` Nicolas Pitre
2014-01-29 17:45   ` Nicolas Pitre
2014-01-29 17:45   ` Nicolas Pitre
2014-01-29 20:31   ` Nicolas Pitre
2014-01-29 20:31     ` Nicolas Pitre
2014-01-29 20:31     ` Nicolas Pitre
2014-01-29 20:31     ` Nicolas Pitre
2014-01-30  3:38     ` Preeti U Murthy
2014-01-30  3:50       ` Preeti U Murthy
2014-01-30  3:38       ` Preeti U Murthy
2014-01-30  3:38       ` Preeti U Murthy
2014-01-30  5:28       ` Nicolas Pitre
2014-01-30  5:28         ` Nicolas Pitre
2014-01-30  5:28         ` Nicolas Pitre
2014-01-30  5:28         ` Nicolas Pitre
2014-01-30  5:50         ` Preeti U Murthy
2014-01-30  5:53           ` Preeti U Murthy
2014-01-30  5:50           ` Preeti U Murthy
2014-01-30  5:50           ` Preeti U Murthy
2014-01-30 13:44         ` Daniel Lezcano
2014-01-30 13:44           ` Daniel Lezcano
2014-01-30 13:44           ` Daniel Lezcano
2014-01-30 13:44           ` Daniel Lezcano
2014-01-30 16:07           ` Nicolas Pitre
2014-01-30 16:07             ` Nicolas Pitre
2014-01-30 16:07             ` Nicolas Pitre
2014-01-30 16:07             ` Nicolas Pitre
2014-01-30 17:28             ` Daniel Lezcano
2014-01-30 17:28               ` Daniel Lezcano
2014-01-30 17:28               ` Daniel Lezcano
2014-01-30 17:28               ` Daniel Lezcano
2014-01-30 18:06               ` Peter Zijlstra
2014-01-30 18:06                 ` Peter Zijlstra
2014-01-30 18:06                 ` Peter Zijlstra
2014-01-30 18:06                 ` Peter Zijlstra
2014-01-30 19:24               ` Nicolas Pitre
2014-01-30 19:24                 ` Nicolas Pitre
2014-01-30 19:24                 ` Nicolas Pitre
2014-01-30 19:24                 ` Nicolas Pitre
2014-02-11 12:17     ` [tip:sched/core] sched/idle: Move " tip-bot for Nicolas Pitre
2014-01-29 17:45 ` [PATCH v2 2/6] ARM: remove redundant cpuidle_idle_call() Nicolas Pitre
2014-01-29 17:45   ` Nicolas Pitre
2014-01-29 17:45   ` Nicolas Pitre
2014-01-29 17:45   ` Nicolas Pitre
2014-01-29 17:45 ` Nicolas Pitre [this message]
2014-01-29 17:45   ` [PATCH v2 3/6] PPC: " Nicolas Pitre
2014-01-29 17:45   ` Nicolas Pitre
2014-01-29 17:45   ` Nicolas Pitre
2014-01-29 17:45 ` [PATCH v2 4/6] SH: " Nicolas Pitre
2014-01-29 17:45   ` Nicolas Pitre
2014-01-29 17:45   ` Nicolas Pitre
2014-01-29 17:45   ` Nicolas Pitre
2014-01-29 17:45 ` [PATCH v2 5/6] X86: " Nicolas Pitre
2014-01-29 17:45   ` Nicolas Pitre
2014-01-29 17:45   ` Nicolas Pitre
2014-01-29 17:45   ` Nicolas Pitre
2014-01-29 19:02   ` Olof Johansson
2014-01-29 19:02     ` Olof Johansson
2014-01-29 19:02     ` Olof Johansson
2014-01-29 19:02     ` Olof Johansson
2014-01-29 19:02     ` Olof Johansson
2014-01-29 20:14     ` Nicolas Pitre
2014-01-29 20:14       ` Nicolas Pitre
2014-01-29 20:14       ` Nicolas Pitre
2014-01-29 20:14       ` Nicolas Pitre
2014-01-29 20:14       ` Nicolas Pitre
2014-01-30  9:24       ` Peter Zijlstra
2014-01-30  9:24         ` Peter Zijlstra
2014-01-30  9:24         ` Peter Zijlstra
2014-01-30  9:24         ` Peter Zijlstra
2014-01-30  9:24         ` Peter Zijlstra
2014-01-29 17:45 ` [PATCH v2 6/6] cpu/idle.c: move to sched/idle.c Nicolas Pitre
2014-01-29 17:45   ` Nicolas Pitre
2014-01-29 17:45   ` Nicolas Pitre
2014-01-29 17:45   ` Nicolas Pitre
2014-01-30 15:25   ` Peter Zijlstra
2014-01-30 15:25     ` Peter Zijlstra
2014-01-30 15:25     ` Peter Zijlstra
2014-01-30 15:25     ` Peter Zijlstra
2014-01-30 15:25     ` Peter Zijlstra
2014-01-30 16:03     ` Nicolas Pitre
2014-01-30 16:03       ` Nicolas Pitre
2014-01-30 16:03       ` Nicolas Pitre
2014-01-30 16:03       ` Nicolas Pitre
2014-01-30 16:27       ` Peter Zijlstra
2014-01-30 16:27         ` Peter Zijlstra
2014-01-30 16:27         ` Peter Zijlstra
2014-01-30 16:27         ` Peter Zijlstra
2014-01-30 16:27         ` Peter Zijlstra
2014-01-30 16:41         ` Joe Perches
2014-01-30 16:41           ` Joe Perches
2014-01-30 16:41           ` Joe Perches
2014-01-30 16:41           ` Joe Perches
2014-01-30 16:52           ` Peter Zijlstra
2014-01-30 16:52             ` Peter Zijlstra
2014-01-30 16:52             ` Peter Zijlstra
2014-01-30 16:52             ` Peter Zijlstra
2014-01-30 16:52             ` Peter Zijlstra
2014-02-06 14:09         ` Nicolas Pitre
2014-02-06 14:09           ` Nicolas Pitre
2014-02-06 14:09           ` Nicolas Pitre
2014-02-06 14:09           ` Nicolas Pitre
2014-02-06 16:43           ` Peter Zijlstra
2014-02-06 16:43             ` Peter Zijlstra
2014-02-06 16:43             ` Peter Zijlstra
2014-02-06 16:43             ` Peter Zijlstra
2014-02-07 11:09             ` Nicolas Pitre
2014-02-07 11:09               ` Nicolas Pitre
2014-02-07 11:09               ` Nicolas Pitre
2014-02-07 11:09               ` Nicolas Pitre
2014-02-07 12:32               ` Peter Zijlstra
2014-02-07 12:32                 ` Peter Zijlstra
2014-02-07 12:32                 ` Peter Zijlstra
2014-02-07 12:32                 ` Peter Zijlstra
2014-02-07 12:32                 ` Peter Zijlstra
2014-02-11 12:18       ` [tip:sched/core] sched/idle: Move cpu/idle.c " tip-bot for Nicolas Pitre
2014-01-30  9:28 ` [PATCH v2 0/6] setting the table for integration of cpuidle with the scheduler Peter Zijlstra
2014-01-30  9:28   ` Peter Zijlstra
2014-01-30  9:28   ` Peter Zijlstra
2014-01-30  9:28   ` Peter Zijlstra
2014-01-30  9:28   ` Peter Zijlstra
2014-01-30 13:31   ` Nicolas Pitre
2014-01-30 13:31     ` Nicolas Pitre
2014-01-30 13:31     ` Nicolas Pitre
2014-01-30 13:31     ` Nicolas Pitre

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1391017513-12995-4-git-send-email-nicolas.pitre@linaro.org \
    --to=nicolas.pitre@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.