From: Lee Jones <lee.jones@linaro.org> To: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Cc: alexandre.torgue@st.com, Lee Jones <lee.jones@linaro.org>, devicetree@vger.kernel.org, Srinivas Kandagatla <srinivas.kandagatla@st.com> Subject: [PATCH 3/4] ARM: DT: STi: Add DT node for MiPHY365x Date: Fri, 14 Feb 2014 11:23:55 +0000 [thread overview] Message-ID: <1392377036-12816-3-git-send-email-lee.jones@linaro.org> (raw) In-Reply-To: <1392377036-12816-1-git-send-email-lee.jones@linaro.org> The MiPHY365x is a Generic PHY which can serve various SATA or PCIe devices. It has 2 ports which it can use for either; both SATA, both PCIe or one of each in any configuration. Cc: devicetree@vger.kernel.org Cc: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> --- arch/arm/boot/dts/stih416-b2020-revE.dts | 6 +++++- arch/arm/boot/dts/stih416-b2020.dts | 6 ++++++ arch/arm/boot/dts/stih416.dtsi | 13 +++++++++++++ 3 files changed, 24 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/stih416-b2020-revE.dts b/arch/arm/boot/dts/stih416-b2020-revE.dts index a874570..dbe67fa 100644 --- a/arch/arm/boot/dts/stih416-b2020-revE.dts +++ b/arch/arm/boot/dts/stih416-b2020-revE.dts @@ -32,6 +32,10 @@ ethernet1: ethernet@fef08000 { snps,reset-gpio = <&PIO0 7>; }; - }; + miphy365x_phy: miphy365x@0 { + st,pcie_tx_pol_inv = <1>; + st,sata_gen = "gen3"; + }; + }; }; diff --git a/arch/arm/boot/dts/stih416-b2020.dts b/arch/arm/boot/dts/stih416-b2020.dts index 276f28d..fd9cbad 100644 --- a/arch/arm/boot/dts/stih416-b2020.dts +++ b/arch/arm/boot/dts/stih416-b2020.dts @@ -13,4 +13,10 @@ model = "STiH416 B2020"; compatible = "st,stih416", "st,stih416-b2020"; + soc { + miphy365x_phy: miphy365x@0 { + st,pcie_tx_pol_inv = <1>; + st,sata_gen = "gen3"; + }; + }; }; diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi index 85b8063..9fd8efb 100644 --- a/arch/arm/boot/dts/stih416.dtsi +++ b/arch/arm/boot/dts/stih416.dtsi @@ -9,6 +9,8 @@ #include "stih41x.dtsi" #include "stih416-clock.dtsi" #include "stih416-pinctrl.dtsi" + +#include <dt-bindings/phy/phy-miphy365x.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/reset-controller/stih416-resets.h> / { @@ -140,5 +142,16 @@ clocks = <&CLK_S_ICN_REG_0>; }; + miphy365x_phy: miphy365x@0 { + compatible = "st,miphy365x-phy"; + reg = <0xfe382000 0x100>, + <0xfe38a000 0x100>, + <0xfe394000 0x100>, + <0xfe804000 0x100>; + reg-names = "sata0", "sata1", "pcie0", "pcie1"; + + #phy-cells = <2>; + st,syscfg = <&syscfg_rear>; + }; }; }; -- 1.8.3.2
WARNING: multiple messages have this Message-ID (diff)
From: lee.jones@linaro.org (Lee Jones) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 3/4] ARM: DT: STi: Add DT node for MiPHY365x Date: Fri, 14 Feb 2014 11:23:55 +0000 [thread overview] Message-ID: <1392377036-12816-3-git-send-email-lee.jones@linaro.org> (raw) In-Reply-To: <1392377036-12816-1-git-send-email-lee.jones@linaro.org> The MiPHY365x is a Generic PHY which can serve various SATA or PCIe devices. It has 2 ports which it can use for either; both SATA, both PCIe or one of each in any configuration. Cc: devicetree at vger.kernel.org Cc: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> --- arch/arm/boot/dts/stih416-b2020-revE.dts | 6 +++++- arch/arm/boot/dts/stih416-b2020.dts | 6 ++++++ arch/arm/boot/dts/stih416.dtsi | 13 +++++++++++++ 3 files changed, 24 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/stih416-b2020-revE.dts b/arch/arm/boot/dts/stih416-b2020-revE.dts index a874570..dbe67fa 100644 --- a/arch/arm/boot/dts/stih416-b2020-revE.dts +++ b/arch/arm/boot/dts/stih416-b2020-revE.dts @@ -32,6 +32,10 @@ ethernet1: ethernet at fef08000 { snps,reset-gpio = <&PIO0 7>; }; - }; + miphy365x_phy: miphy365x at 0 { + st,pcie_tx_pol_inv = <1>; + st,sata_gen = "gen3"; + }; + }; }; diff --git a/arch/arm/boot/dts/stih416-b2020.dts b/arch/arm/boot/dts/stih416-b2020.dts index 276f28d..fd9cbad 100644 --- a/arch/arm/boot/dts/stih416-b2020.dts +++ b/arch/arm/boot/dts/stih416-b2020.dts @@ -13,4 +13,10 @@ model = "STiH416 B2020"; compatible = "st,stih416", "st,stih416-b2020"; + soc { + miphy365x_phy: miphy365x at 0 { + st,pcie_tx_pol_inv = <1>; + st,sata_gen = "gen3"; + }; + }; }; diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi index 85b8063..9fd8efb 100644 --- a/arch/arm/boot/dts/stih416.dtsi +++ b/arch/arm/boot/dts/stih416.dtsi @@ -9,6 +9,8 @@ #include "stih41x.dtsi" #include "stih416-clock.dtsi" #include "stih416-pinctrl.dtsi" + +#include <dt-bindings/phy/phy-miphy365x.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/reset-controller/stih416-resets.h> / { @@ -140,5 +142,16 @@ clocks = <&CLK_S_ICN_REG_0>; }; + miphy365x_phy: miphy365x at 0 { + compatible = "st,miphy365x-phy"; + reg = <0xfe382000 0x100>, + <0xfe38a000 0x100>, + <0xfe394000 0x100>, + <0xfe804000 0x100>; + reg-names = "sata0", "sata1", "pcie0", "pcie1"; + + #phy-cells = <2>; + st,syscfg = <&syscfg_rear>; + }; }; }; -- 1.8.3.2
next prev parent reply other threads:[~2014-02-14 11:24 UTC|newest] Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top 2014-02-14 11:23 [PATCH 1/4] phy: miphy365x: Add Device Tree bindings for the MiPHY365x Lee Jones 2014-02-14 11:23 ` Lee Jones 2014-02-14 11:23 ` Lee Jones 2014-02-14 11:23 ` [PATCH 2/4] phy: miphy365x: Add MiPHY365x header file for DT x Driver defines Lee Jones 2014-02-14 11:23 ` Lee Jones 2014-02-14 11:23 ` Lee Jones 2014-03-05 7:35 ` Mark Rutland 2014-03-05 7:35 ` Mark Rutland 2014-03-05 7:35 ` Mark Rutland 2014-02-14 11:23 ` Lee Jones [this message] 2014-02-14 11:23 ` [PATCH 3/4] ARM: DT: STi: Add DT node for MiPHY365x Lee Jones 2014-03-01 18:43 ` Kishon Vijay Abraham I 2014-03-01 18:43 ` Kishon Vijay Abraham I 2014-03-01 18:43 ` Kishon Vijay Abraham I 2014-03-05 7:42 ` Mark Rutland 2014-03-05 7:42 ` Mark Rutland 2014-03-05 7:42 ` Mark Rutland 2014-02-14 11:23 ` [PATCH 4/4] phy: miphy365x: Provide support for the MiPHY356x Generic PHY Lee Jones 2014-02-14 11:23 ` Lee Jones 2014-02-25 10:51 ` Lee Jones 2014-02-25 10:51 ` Lee Jones 2014-03-05 7:55 ` Mark Rutland 2014-03-05 7:55 ` Mark Rutland 2014-05-19 14:21 ` Kishon Vijay Abraham I 2014-05-19 14:21 ` Kishon Vijay Abraham I 2014-05-19 16:41 ` Lee Jones 2014-05-19 16:41 ` Lee Jones 2014-03-05 7:34 ` [PATCH 1/4] phy: miphy365x: Add Device Tree bindings for the MiPHY365x Mark Rutland 2014-03-05 7:34 ` Mark Rutland 2014-03-05 7:34 ` Mark Rutland 2014-03-05 8:40 ` Lee Jones 2014-03-05 8:40 ` Lee Jones 2014-03-05 8:40 ` Lee Jones 2014-03-05 9:12 ` Lee Jones 2014-03-05 9:12 ` Lee Jones 2014-03-05 9:12 ` Lee Jones 2014-03-10 16:22 ` [PATCH v2 " Lee Jones 2014-03-10 16:22 ` Lee Jones 2014-03-12 11:13 ` Mark Rutland 2014-03-12 11:13 ` Mark Rutland 2014-03-12 11:13 ` Mark Rutland -- strict thread matches above, loose matches on Subject: below -- 2014-05-22 13:53 [RESEND 0/4] phy: Introduce support for MiPHY365x Lee Jones 2014-05-22 13:53 ` [PATCH 3/4] ARM: DT: STi: Add DT node " Lee Jones 2014-05-22 13:53 ` Lee Jones 2014-04-29 7:21 [PATCH 0/4] phy: Introduce support " Lee Jones 2014-04-29 7:21 ` [PATCH 3/4] ARM: DT: STi: Add DT node " Lee Jones 2014-04-29 7:21 ` Lee Jones 2014-03-12 13:14 [PATCH 0/4] phy: Introduce support " Lee Jones 2014-03-12 13:14 ` [PATCH 3/4] ARM: DT: STi: Add DT node " Lee Jones 2014-03-12 13:14 ` Lee Jones 2014-02-12 16:03 [PATCH 1/4] phy: miphy365x: Add Device Tree bindings for the MiPHY365x Lee Jones 2014-02-12 16:03 ` [PATCH 3/4] ARM: DT: STi: Add DT node for MiPHY365x Lee Jones 2014-02-12 16:03 ` Lee Jones
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1392377036-12816-3-git-send-email-lee.jones@linaro.org \ --to=lee.jones@linaro.org \ --cc=alexandre.torgue@st.com \ --cc=devicetree@vger.kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=srinivas.kandagatla@st.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.