All of lore.kernel.org
 help / color / mirror / Atom feed
From: Matthew Wilcox <matthew.r.wilcox@intel.com>
To: linux-kernel@vger.kernel.org, linux-mm@kvack.org,
	linux-fsdevel@vger.kernel.org, willy@linux.intel.com
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Subject: [PATCH v6 05/22] Introduce IS_DAX(inode)
Date: Tue, 25 Feb 2014 09:18:21 -0500	[thread overview]
Message-ID: <1393337918-28265-6-git-send-email-matthew.r.wilcox@intel.com> (raw)
In-Reply-To: <1393337918-28265-1-git-send-email-matthew.r.wilcox@intel.com>

Use an inode flag to tag inodes which should avoid using the page cache.
Convert ext2 to use it instead of mapping_is_xip().

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
---
 fs/ext2/inode.c    | 9 ++++++---
 fs/ext2/xip.h      | 2 --
 include/linux/fs.h | 6 ++++++
 3 files changed, 12 insertions(+), 5 deletions(-)

diff --git a/fs/ext2/inode.c b/fs/ext2/inode.c
index 94ed3684..e7d3192 100644
--- a/fs/ext2/inode.c
+++ b/fs/ext2/inode.c
@@ -731,7 +731,7 @@ static int ext2_get_blocks(struct inode *inode,
 		goto cleanup;
 	}
 
-	if (ext2_use_xip(inode->i_sb)) {
+	if (IS_DAX(inode)) {
 		/*
 		 * we need to clear the block
 		 */
@@ -1201,7 +1201,7 @@ static int ext2_setsize(struct inode *inode, loff_t newsize)
 
 	inode_dio_wait(inode);
 
-	if (mapping_is_xip(inode->i_mapping))
+	if (IS_DAX(inode))
 		error = xip_truncate_page(inode->i_mapping, newsize);
 	else if (test_opt(inode->i_sb, NOBH))
 		error = nobh_truncate_page(inode->i_mapping,
@@ -1273,7 +1273,8 @@ void ext2_set_inode_flags(struct inode *inode)
 {
 	unsigned int flags = EXT2_I(inode)->i_flags;
 
-	inode->i_flags &= ~(S_SYNC|S_APPEND|S_IMMUTABLE|S_NOATIME|S_DIRSYNC);
+	inode->i_flags &= ~(S_SYNC | S_APPEND | S_IMMUTABLE | S_NOATIME |
+				S_DIRSYNC | S_DAX);
 	if (flags & EXT2_SYNC_FL)
 		inode->i_flags |= S_SYNC;
 	if (flags & EXT2_APPEND_FL)
@@ -1284,6 +1285,8 @@ void ext2_set_inode_flags(struct inode *inode)
 		inode->i_flags |= S_NOATIME;
 	if (flags & EXT2_DIRSYNC_FL)
 		inode->i_flags |= S_DIRSYNC;
+	if (test_opt(inode->i_sb, XIP))
+		inode->i_flags |= S_DAX;
 }
 
 /* Propagate flags from i_flags to EXT2_I(inode)->i_flags */
diff --git a/fs/ext2/xip.h b/fs/ext2/xip.h
index 18b34d2..29be737 100644
--- a/fs/ext2/xip.h
+++ b/fs/ext2/xip.h
@@ -16,9 +16,7 @@ static inline int ext2_use_xip (struct super_block *sb)
 }
 int ext2_get_xip_mem(struct address_space *, pgoff_t, int,
 				void **, unsigned long *);
-#define mapping_is_xip(map) unlikely(map->a_ops->get_xip_mem)
 #else
-#define mapping_is_xip(map)			0
 #define ext2_xip_verify_sb(sb)			do { } while (0)
 #define ext2_use_xip(sb)			0
 #define ext2_clear_xip_target(inode, chain)	0
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 6082956..42fe4e5 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -1640,6 +1640,7 @@ struct super_operations {
 #define S_IMA		1024	/* Inode has an associated IMA struct */
 #define S_AUTOMOUNT	2048	/* Automount/referral quasi-directory */
 #define S_NOSEC		4096	/* no suid or xattr security attributes */
+#define S_DAX		8192	/* Direct Access, avoiding the page cache */
 
 /*
  * Note that nosuid etc flags are inode-specific: setting some file-system
@@ -1677,6 +1678,11 @@ struct super_operations {
 #define IS_IMA(inode)		((inode)->i_flags & S_IMA)
 #define IS_AUTOMOUNT(inode)	((inode)->i_flags & S_AUTOMOUNT)
 #define IS_NOSEC(inode)		((inode)->i_flags & S_NOSEC)
+#ifdef CONFIG_FS_XIP
+#define IS_DAX(inode)		((inode)->i_flags & S_DAX)
+#else
+#define IS_DAX(inode)		0
+#endif
 
 /*
  * Inode state bits.  Protected by inode->i_lock
-- 
1.8.5.3


WARNING: multiple messages have this Message-ID (diff)
From: Matthew Wilcox <matthew.r.wilcox@intel.com>
To: linux-kernel@vger.kernel.org, linux-mm@kvack.org,
	linux-fsdevel@vger.kernel.org, willy@linux.intel.com
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Subject: [PATCH v6 05/22] Introduce IS_DAX(inode)
Date: Tue, 25 Feb 2014 09:18:21 -0500	[thread overview]
Message-ID: <1393337918-28265-6-git-send-email-matthew.r.wilcox@intel.com> (raw)
In-Reply-To: <1393337918-28265-1-git-send-email-matthew.r.wilcox@intel.com>

Use an inode flag to tag inodes which should avoid using the page cache.
Convert ext2 to use it instead of mapping_is_xip().

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
---
 fs/ext2/inode.c    | 9 ++++++---
 fs/ext2/xip.h      | 2 --
 include/linux/fs.h | 6 ++++++
 3 files changed, 12 insertions(+), 5 deletions(-)

diff --git a/fs/ext2/inode.c b/fs/ext2/inode.c
index 94ed3684..e7d3192 100644
--- a/fs/ext2/inode.c
+++ b/fs/ext2/inode.c
@@ -731,7 +731,7 @@ static int ext2_get_blocks(struct inode *inode,
 		goto cleanup;
 	}
 
-	if (ext2_use_xip(inode->i_sb)) {
+	if (IS_DAX(inode)) {
 		/*
 		 * we need to clear the block
 		 */
@@ -1201,7 +1201,7 @@ static int ext2_setsize(struct inode *inode, loff_t newsize)
 
 	inode_dio_wait(inode);
 
-	if (mapping_is_xip(inode->i_mapping))
+	if (IS_DAX(inode))
 		error = xip_truncate_page(inode->i_mapping, newsize);
 	else if (test_opt(inode->i_sb, NOBH))
 		error = nobh_truncate_page(inode->i_mapping,
@@ -1273,7 +1273,8 @@ void ext2_set_inode_flags(struct inode *inode)
 {
 	unsigned int flags = EXT2_I(inode)->i_flags;
 
-	inode->i_flags &= ~(S_SYNC|S_APPEND|S_IMMUTABLE|S_NOATIME|S_DIRSYNC);
+	inode->i_flags &= ~(S_SYNC | S_APPEND | S_IMMUTABLE | S_NOATIME |
+				S_DIRSYNC | S_DAX);
 	if (flags & EXT2_SYNC_FL)
 		inode->i_flags |= S_SYNC;
 	if (flags & EXT2_APPEND_FL)
@@ -1284,6 +1285,8 @@ void ext2_set_inode_flags(struct inode *inode)
 		inode->i_flags |= S_NOATIME;
 	if (flags & EXT2_DIRSYNC_FL)
 		inode->i_flags |= S_DIRSYNC;
+	if (test_opt(inode->i_sb, XIP))
+		inode->i_flags |= S_DAX;
 }
 
 /* Propagate flags from i_flags to EXT2_I(inode)->i_flags */
diff --git a/fs/ext2/xip.h b/fs/ext2/xip.h
index 18b34d2..29be737 100644
--- a/fs/ext2/xip.h
+++ b/fs/ext2/xip.h
@@ -16,9 +16,7 @@ static inline int ext2_use_xip (struct super_block *sb)
 }
 int ext2_get_xip_mem(struct address_space *, pgoff_t, int,
 				void **, unsigned long *);
-#define mapping_is_xip(map) unlikely(map->a_ops->get_xip_mem)
 #else
-#define mapping_is_xip(map)			0
 #define ext2_xip_verify_sb(sb)			do { } while (0)
 #define ext2_use_xip(sb)			0
 #define ext2_clear_xip_target(inode, chain)	0
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 6082956..42fe4e5 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -1640,6 +1640,7 @@ struct super_operations {
 #define S_IMA		1024	/* Inode has an associated IMA struct */
 #define S_AUTOMOUNT	2048	/* Automount/referral quasi-directory */
 #define S_NOSEC		4096	/* no suid or xattr security attributes */
+#define S_DAX		8192	/* Direct Access, avoiding the page cache */
 
 /*
  * Note that nosuid etc flags are inode-specific: setting some file-system
@@ -1677,6 +1678,11 @@ struct super_operations {
 #define IS_IMA(inode)		((inode)->i_flags & S_IMA)
 #define IS_AUTOMOUNT(inode)	((inode)->i_flags & S_AUTOMOUNT)
 #define IS_NOSEC(inode)		((inode)->i_flags & S_NOSEC)
+#ifdef CONFIG_FS_XIP
+#define IS_DAX(inode)		((inode)->i_flags & S_DAX)
+#else
+#define IS_DAX(inode)		0
+#endif
 
 /*
  * Inode state bits.  Protected by inode->i_lock
-- 
1.8.5.3

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

  parent reply	other threads:[~2014-02-25 14:24 UTC|newest]

Thread overview: 79+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-02-25 14:18 [PATCH v6 00/22] Support ext4 on NV-DIMMs Matthew Wilcox
2014-02-25 14:18 ` Matthew Wilcox
2014-02-25 14:18 ` [PATCH v6 01/22] Fix XIP fault vs truncate race Matthew Wilcox
2014-02-25 14:18   ` Matthew Wilcox
2014-02-25 14:18 ` [PATCH v6 02/22] Allow page fault handlers to perform the COW Matthew Wilcox
2014-02-25 14:18   ` Matthew Wilcox
2014-02-25 14:18 ` [PATCH v6 03/22] axonram: Fix bug in direct_access Matthew Wilcox
2014-02-25 14:18   ` Matthew Wilcox
2014-02-25 14:18 ` [PATCH v6 04/22] Change direct_access calling convention Matthew Wilcox
2014-02-25 14:18   ` Matthew Wilcox
2014-02-25 14:18 ` Matthew Wilcox [this message]
2014-02-25 14:18   ` [PATCH v6 05/22] Introduce IS_DAX(inode) Matthew Wilcox
2014-02-25 14:18 ` [PATCH v6 06/22] Replace XIP read and write with DAX I/O Matthew Wilcox
2014-02-25 14:18   ` Matthew Wilcox
2014-03-11  0:32   ` Toshi Kani
2014-03-11  0:32     ` Toshi Kani
2014-03-11 12:53     ` Matthew Wilcox
2014-03-11 12:53       ` Matthew Wilcox
2014-02-25 14:18 ` [PATCH v6 07/22] Replace the XIP page fault handler with the DAX page fault handler Matthew Wilcox
2014-02-25 14:18   ` Matthew Wilcox
2014-02-28 17:49   ` Toshi Kani
2014-02-28 17:49     ` Toshi Kani
2014-02-28 20:20     ` Matthew Wilcox
2014-02-28 20:20       ` Matthew Wilcox
2014-02-28 22:18       ` Toshi Kani
2014-02-28 22:18         ` Toshi Kani
2014-02-28 22:18         ` Toshi Kani
2014-03-02 23:30       ` Dave Chinner
2014-03-02 23:30         ` Dave Chinner
2014-03-03 23:07         ` Ross Zwisler
2014-03-03 23:07           ` Ross Zwisler
2014-03-04  0:56           ` Dave Chinner
2014-03-04  0:56             ` Dave Chinner
2014-03-20 19:38             ` Matthew Wilcox
2014-03-20 19:38               ` Matthew Wilcox
2014-03-20 23:55               ` Dave Chinner
2014-03-20 23:55                 ` Dave Chinner
2014-02-25 14:18 ` [PATCH v6 08/22] Replace xip_truncate_page with dax_truncate_page Matthew Wilcox
2014-02-25 14:18   ` Matthew Wilcox
2014-02-25 14:18 ` [PATCH v6 09/22] Remove mm/filemap_xip.c Matthew Wilcox
2014-02-25 14:18   ` Matthew Wilcox
2014-02-25 14:18 ` [PATCH v6 10/22] Remove get_xip_mem Matthew Wilcox
2014-02-25 14:18   ` Matthew Wilcox
2014-02-25 14:18 ` [PATCH v6 11/22] Replace ext2_clear_xip_target with dax_clear_blocks Matthew Wilcox
2014-02-25 14:18   ` Matthew Wilcox
2014-02-25 14:18 ` [PATCH v6 12/22] ext2: Remove ext2_xip_verify_sb() Matthew Wilcox
2014-02-25 14:18   ` Matthew Wilcox
2014-02-25 14:18 ` [PATCH v6 13/22] ext2: Remove ext2_use_xip Matthew Wilcox
2014-02-25 14:18   ` Matthew Wilcox
2014-02-25 14:18 ` [PATCH v6 14/22] ext2: Remove xip.c and xip.h Matthew Wilcox
2014-02-25 14:18   ` Matthew Wilcox
2014-02-25 14:18 ` [PATCH v6 15/22] Remove CONFIG_EXT2_FS_XIP and rename CONFIG_FS_XIP to CONFIG_FS_DAX Matthew Wilcox
2014-02-25 14:18   ` Matthew Wilcox
2014-02-25 14:18 ` [PATCH v6 16/22] ext2: Remove ext2_aops_xip Matthew Wilcox
2014-02-25 14:18   ` Matthew Wilcox
2014-02-25 14:18 ` [PATCH v6 17/22] Get rid of most mentions of XIP in ext2 Matthew Wilcox
2014-02-25 14:18   ` Matthew Wilcox
2014-02-25 14:18 ` [PATCH v6 18/22] xip: Add xip_zero_page_range Matthew Wilcox
2014-02-25 14:18   ` Matthew Wilcox
2014-02-25 14:18 ` [PATCH v6 19/22] ext4: Make ext4_block_zero_page_range static Matthew Wilcox
2014-02-25 14:18   ` Matthew Wilcox
2014-02-25 14:18 ` [PATCH v6 20/22] ext4: Add DAX functionality Matthew Wilcox
2014-02-25 14:18   ` Matthew Wilcox
2014-02-25 14:18 ` [PATCH v6 21/22] ext4: Fix typos Matthew Wilcox
2014-02-25 14:18   ` Matthew Wilcox
2014-02-25 14:18 ` [PATCH v6 22/22] dax: Add reporting of major faults Matthew Wilcox
2014-02-25 14:18   ` Matthew Wilcox
2014-02-26 15:07 ` [PATCH v6 23/22] Bugfixes Matthew Wilcox
2014-02-26 15:07   ` Matthew Wilcox
2014-02-27 14:01 ` [PATCH v6 00/22] Support ext4 on NV-DIMMs Florian Weimer
2014-02-27 14:01   ` Florian Weimer
2014-02-27 16:29   ` Matthew Wilcox
2014-02-27 16:29     ` Matthew Wilcox
2014-02-27 16:36     ` Florian Weimer
2014-02-27 16:36       ` Florian Weimer
2014-03-02  8:22 ` Pavel Machek
2014-03-02  8:22   ` Pavel Machek
     [not found] ` <CF4DEE22.25C8F%matthew.r.wilcox@intel.com>
2014-03-18 18:45   ` [PATCH v6 20/22] ext4: Add DAX functionality Ross Zwisler
2014-03-18 18:45     ` Ross Zwisler

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1393337918-28265-6-git-send-email-matthew.r.wilcox@intel.com \
    --to=matthew.r.wilcox@intel.com \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=willy@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.