All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mike Rapoport <mike.rapoport@ravellosystems.com>
To: David Miller <davem@davemloft.net>
Cc: David Stevens <dlstevens@us.ibm.com>,
	Cong Wang <cwang@twopensource.com>,
	netdev <netdev@vger.kernel.org>,
	stable@vger.kernel.org,
	Mike Rapoport <mike.rapoport@ravellosystems.com>
Subject: [PATCH net] net: vxlan: fix crash when interface is created with no group
Date: Tue,  1 Apr 2014 09:23:01 +0300	[thread overview]
Message-ID: <1396333381-7252-1-git-send-email-mike.rapoport@ravellosystems.com> (raw)

If the vxlan interface is created without explicit group definition,
there are corner cases which may cause kernel panic.

For instance, in the following scenario:

node A:
$ ip link add dev vxlan42  address 2c:c2:60:00:10:20 type vxlan id 42
$ ip addr add dev vxlan42 10.0.0.1/24
$ ip link set up dev vxlan42
$ arp -i vxlan42 -s 10.0.0.2 2c:c2:60:00:01:02
$ bridge fdb add dev vxlan42 to 2c:c2:60:00:01:02 dst <IPv4 address>
$ ping 10.0.0.2

node B:
$ ip link add dev vxlan42 address 2c:c2:60:00:01:02 type vxlan id 42
$ ip addr add dev vxlan42 10.0.0.2/24
$ ip link set up dev vxlan42
$ arp -i vxlan42 -s 10.0.0.1 2c:c2:60:00:10:20

node B crashes:

 vxlan42: 2c:c2:60:00:10:20 migrated from 4011:eca4:c0a8:6466:c0a8:6415:8e09:2118 to (invalid address)
 vxlan42: 2c:c2:60:00:10:20 migrated from 4011:eca4:c0a8:6466:c0a8:6415:8e09:2118 to (invalid address)
 BUG: unable to handle kernel NULL pointer dereference at 0000000000000046
 IP: [<ffffffff8143c459>] ip6_route_output+0x58/0x82
 PGD 7bd89067 PUD 7bd4e067 PMD 0
 Oops: 0000 [#1] SMP
 Modules linked in:
 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.14.0-rc8-hvx-xen-00019-g97a5221-dirty #154
 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
 task: ffff88007c774f50 ti: ffff88007c79c000 task.ti: ffff88007c79c000
 RIP: 0010:[<ffffffff8143c459>]  [<ffffffff8143c459>] ip6_route_output+0x58/0x82
 RSP: 0018:ffff88007fd03668  EFLAGS: 00010282
 RAX: 0000000000000000 RBX: ffffffff8186a000 RCX: 0000000000000040
 RDX: 0000000000000000 RSI: ffff88007b0e4a80 RDI: ffff88007fd03754
 RBP: ffff88007fd03688 R08: ffff88007b0e4a80 R09: 0000000000000000
 R10: 0200000a0100000a R11: 0001002200000000 R12: ffff88007fd03740
 R13: ffff88007b0e4a80 R14: ffff88007b0e4a80 R15: ffff88007bba0c50
 FS:  0000000000000000(0000) GS:ffff88007fd00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
 CR2: 0000000000000046 CR3: 000000007bb60000 CR4: 00000000000006e0
 Stack:
  0000000000000000 ffff88007fd037a0 ffffffff8186a000 ffff88007fd03740
  ffff88007fd036c8 ffffffff814320bb 0000000000006e49 ffff88007b8b7360
  ffff88007bdbf200 ffff88007bcbc000 ffff88007b8b7000 ffff88007b8b7360
 Call Trace:
  <IRQ>
  [<ffffffff814320bb>] ip6_dst_lookup_tail+0x2d/0xa4
  [<ffffffff814322a5>] ip6_dst_lookup+0x10/0x12
  [<ffffffff81323b4e>] vxlan_xmit_one+0x32a/0x68c
  [<ffffffff814a325a>] ? _raw_spin_unlock_irqrestore+0x12/0x14
  [<ffffffff8104c551>] ? lock_timer_base.isra.23+0x26/0x4b
  [<ffffffff8132451a>] vxlan_xmit+0x66a/0x6a8
  [<ffffffff8141a365>] ? ipt_do_table+0x35f/0x37e
  [<ffffffff81204ba2>] ? selinux_ip_postroute+0x41/0x26e
  [<ffffffff8139d0c1>] dev_hard_start_xmit+0x2ce/0x3ce
  [<ffffffff8139d491>] __dev_queue_xmit+0x2d0/0x392
  [<ffffffff813b380f>] ? eth_header+0x28/0xb5
  [<ffffffff8139d569>] dev_queue_xmit+0xb/0xd
  [<ffffffff813a5aa6>] neigh_resolve_output+0x134/0x152
  [<ffffffff813db741>] ip_finish_output2+0x236/0x299
  [<ffffffff813dc074>] ip_finish_output+0x98/0x9d
  [<ffffffff813dc749>] ip_output+0x62/0x67
  [<ffffffff813da9f2>] dst_output+0xf/0x11
  [<ffffffff813dc11c>] ip_local_out+0x1b/0x1f
  [<ffffffff813dcf1b>] ip_send_skb+0x11/0x37
  [<ffffffff813dcf70>] ip_push_pending_frames+0x2f/0x33
  [<ffffffff813ff732>] icmp_push_reply+0x106/0x115
  [<ffffffff813ff9e4>] icmp_reply+0x142/0x164
  [<ffffffff813ffb3b>] icmp_echo.part.16+0x46/0x48
  [<ffffffff813c1d30>] ? nf_iterate+0x43/0x80
  [<ffffffff813d8037>] ? xfrm4_policy_check.constprop.11+0x52/0x52
  [<ffffffff813ffb62>] icmp_echo+0x25/0x27
  [<ffffffff814005f7>] icmp_rcv+0x1d2/0x20a
  [<ffffffff813d8037>] ? xfrm4_policy_check.constprop.11+0x52/0x52
  [<ffffffff813d810d>] ip_local_deliver_finish+0xd6/0x14f
  [<ffffffff813d8037>] ? xfrm4_policy_check.constprop.11+0x52/0x52
  [<ffffffff813d7fde>] NF_HOOK.constprop.10+0x4c/0x53
  [<ffffffff813d82bf>] ip_local_deliver+0x4a/0x4f
  [<ffffffff813d7f7b>] ip_rcv_finish+0x253/0x26a
  [<ffffffff813d7d28>] ? inet_add_protocol+0x3e/0x3e
  [<ffffffff813d7fde>] NF_HOOK.constprop.10+0x4c/0x53
  [<ffffffff813d856a>] ip_rcv+0x2a6/0x2ec
  [<ffffffff8139a9a0>] __netif_receive_skb_core+0x43e/0x478
  [<ffffffff812a346f>] ? virtqueue_poll+0x16/0x27
  [<ffffffff8139aa2f>] __netif_receive_skb+0x55/0x5a
  [<ffffffff8139aaaa>] process_backlog+0x76/0x12f
  [<ffffffff8139add8>] net_rx_action+0xa2/0x1ab
  [<ffffffff81047847>] __do_softirq+0xca/0x1d1
  [<ffffffff81047ace>] irq_exit+0x3e/0x85
  [<ffffffff8100b98b>] do_IRQ+0xa9/0xc4
  [<ffffffff814a37ad>] common_interrupt+0x6d/0x6d
  <EOI>
  [<ffffffff810378db>] ? native_safe_halt+0x6/0x8
  [<ffffffff810110c7>] default_idle+0x9/0xd
  [<ffffffff81011694>] arch_cpu_idle+0x13/0x1c
  [<ffffffff8107480d>] cpu_startup_entry+0xbc/0x137
  [<ffffffff8102e741>] start_secondary+0x1a0/0x1a5
 Code: 24 14 e8 f1 e5 01 00 31 d2 a8 32 0f 95 c2 49 8b 44 24 2c 49 0b 44 24 24 74 05 83 ca 04 eb 1c 4d 85 ed 74 17 49 8b 85 a8 02 00 00 <66> 8b 40 46 66 c1 e8 07 83 e0 07 c1 e0 03 09 c2 4c 89 e6 48 89
 RIP  [<ffffffff8143c459>] ip6_route_output+0x58/0x82
  RSP <ffff88007fd03668>
 CR2: 0000000000000046
 ---[ end trace 4612329caab37efd ]---

When vxlan interface is created without explicit group definition, the
default_dst protocol family is initialiazed to AF_UNSPEC and the driver
assumes IPv4 configuration. On the other side, the default_dst protocol
family is used to differentiate between IPv4 and IPv6 cases and, since,
AF_UNSPEC != AF_INET, the processing takes the IPv6 path.

Making the IPv4 assumption explicit by settting default_dst protocol
family to AF_INET4 and preventing mixing of IPv4 and IPv6 addresses in
snooped fdb entries fixes the corner case crashes.

Signed-off-by: Mike Rapoport <mike.rapoport@ravellosystems.com>
---

This can happen starting from 3.12 when IPv6 support was merged to vxlan.

 drivers/net/vxlan.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c
index 1236812..d091e52 100644
--- a/drivers/net/vxlan.c
+++ b/drivers/net/vxlan.c
@@ -871,6 +871,9 @@ static int vxlan_fdb_add(struct ndmsg *ndm, struct nlattr *tb[],
 	if (err)
 		return err;
 
+	if (vxlan->default_dst.remote_ip.sa.sa_family != ip.sa.sa_family)
+		return -EAFNOSUPPORT;
+
 	spin_lock_bh(&vxlan->hash_lock);
 	err = vxlan_fdb_create(vxlan, addr, &ip, ndm->ndm_state, flags,
 			       port, vni, ifindex, ndm->ndm_flags);
@@ -2612,9 +2615,10 @@ static int vxlan_newlink(struct net *net, struct net_device *dev,
 	vni = nla_get_u32(data[IFLA_VXLAN_ID]);
 	dst->remote_vni = vni;
 
+	/* Unless IPv6 is explicitly requested, assume IPv4 */
+	dst->remote_ip.sa.sa_family = AF_INET;
 	if (data[IFLA_VXLAN_GROUP]) {
 		dst->remote_ip.sin.sin_addr.s_addr = nla_get_be32(data[IFLA_VXLAN_GROUP]);
-		dst->remote_ip.sa.sa_family = AF_INET;
 	} else if (data[IFLA_VXLAN_GROUP6]) {
 		if (!IS_ENABLED(CONFIG_IPV6))
 			return -EPFNOSUPPORT;
-- 
1.8.1.5

             reply	other threads:[~2014-04-01  6:23 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-04-01  6:23 Mike Rapoport [this message]
2014-04-01 19:22 ` [PATCH net] net: vxlan: fix crash when interface is created with no group Cong Wang
2014-04-02  5:51   ` Mike Rapoport
2014-04-03 15:19 ` David Miller
  -- strict thread matches above, loose matches on Subject: below --
2014-03-17 11:17 Mike Rapoport
2014-03-17 16:34 ` Stephen Hemminger
2014-03-18 15:10 ` Or Gerlitz
2014-03-18 15:51   ` Mike Rapoport
2014-03-19  3:20     ` David Miller
2014-03-19  6:56       ` Mike Rapoport
2014-03-18 16:41 ` Cong Wang
2014-03-18 16:55 ` David Stevens
2014-03-18 18:07   ` Cong Wang
2014-03-19  7:14   ` Mike Rapoport
2014-03-19 19:46     ` David Miller
2014-03-19 19:52       ` Mike Rapoport
2014-03-19 22:29         ` David Miller
2014-03-19 20:28     ` David Stevens
2014-03-20  3:40       ` David Miller
2014-03-19 14:08   ` David Stevens
2014-03-19 14:32     ` Mike Rapoport
2014-03-19 14:40     ` David Stevens
2014-03-20 20:02 ` David Miller
2014-03-21  5:06   ` Mike Rapoport
2014-03-20 20:47 ` David Stevens
2014-03-21 10:22   ` Mike Rapoport
2014-03-21 11:22   ` David Stevens
2014-03-21 15:31     ` Mike Rapoport
2014-03-23  9:27     ` Mike Rapoport
2014-03-23 14:43       ` Or Gerlitz
2014-03-26  0:53         ` David Miller
2014-03-26  9:47           ` Mike Rapoport
2014-03-26 14:47           ` David Stevens
2014-03-26 17:50             ` Mike Rapoport
2014-03-27 20:20               ` Cong Wang
2014-03-28  9:05                 ` Mike Rapoport
2014-03-29  8:29           ` Mike Rapoport
2014-03-31 20:18             ` David Miller
2014-03-24  5:09       ` Pravin Shelar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1396333381-7252-1-git-send-email-mike.rapoport@ravellosystems.com \
    --to=mike.rapoport@ravellosystems.com \
    --cc=cwang@twopensource.com \
    --cc=davem@davemloft.net \
    --cc=dlstevens@us.ibm.com \
    --cc=netdev@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.